DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65...

52

Transcript of DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65...

Page 1: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63
Page 2: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERSWie thuis is in de wereld van kwaliteitsladders voor professioneel en semi-professioneel gebruik, klimmaterialen op maat of steigers kan haast niet om de naam DAS heen.

Als onafhankelijk producent garandeert DAS Ladders u een zeer sterke verhouding prijs kwa-liteit, met als bestseller de volledig binnenshuis ontworpen ‘Hercules’-trapladder. Zo getuigt ook de nieuwe productiehal van 3.500 m2.

Maar wat ons, of liever onze producten, vooral onderscheidt is het gevoel dat u krijgt als u op een ladder van DAS Ladders klimt. Het gevoel op een stabiele en veilige ladder te staan. Kortom een goed gevoel.

Gebruik een product van DAS Ladders en over-tuig uzelf!

Tom DasZaakvoerder DAS Ladders

DAS LADDERSQuiconque est familier des échelles de qualité à usage professionnel et semi-professionel, esca-beaux sur mesure ou échafaudages, connaît sans doute la marque DAS.

En tant que producteur indépendant, DAS Ladders offre un excellent rapport qualité-prix, avec comme article phare l’échelle “Hercules” entièrement conçue chez nous. Notre nouveau hall de production, couvrant 3500 m², en appor-te la preuve..

Mais ce par quoi nos produits se démarquent le plus de la concurrence, c’est surtout la sensation que vous aurez en grimpant sur une échelle DAS. Une impression de stabilité et de sécurité. Vous n’en voudrez plus jamais une autre.

Essayez un produit de DAS Ladders pour vous en convaincre!

Tom DasGérant de DAS Ladders

Page 3: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

VEILIGHEIDSNORMEN & KEURINGEN

Uw veiligheid is onze zorg. Daarom voldoen alle klimmaterialen van DAS Ladders aan de vereiste veiligheidsnormen en keuringen (VGS Veiligheids-garantie, NEN 2484, Nederlandse Warenwet, Europese EN 131,...).

Zowel intern als in samenwerking met AIB Vin-çotte worden de nodige testen uitgevoerd.

NORMES DE SÉCURITÉ & CONTRÔLES

Votre sécurité, c’est notre premier souci. C’est pourquoi tous les articles de DAS Ladders respec-tent les normes de sécurité et de contrôle tech-nique (VGS, NEN 2484, Warenwet, EN 131,...).

Tous les tests nécessaires sont exécutés en inter-ne ou en collaboration avec AIB Vinçotte.

DE DAS-FELSVERBINDING®

De DAS-felsverbinding® is de referentie in de sector. Al sinds 1975 wordt deze techniek door DAS Ladders toegepast en vandaag de dag is elk product uit eigen huis gefelst. Het resultaat zijn sterke en duurzame klimmaterialen met een mooie afwerking. Dit in tegenstelling tot het ge-bruik van popnagels die loskomen of lasnaden die de sterkte van aluminium tot 65 % verminderen.

De DAS-felsverbinding® is uw garantie op een sterke, duurzame en perfect afgewerkte ladder!

FLEXIBILITEIT

Onze jarenlange kennis van het productieproces van aluminium ladders in combinatie met een sterk geautomatiseerd machinepark zorgt ervoor dat wij pieken in volumes kunnen opvangen. Dat wij snel kunnen afwisselen tussen grote en kleine aantallen.

STERKE PRIJS/KWALITEIT

Bij DAS Ladders vindt u alles onder één dak. Van ontwerp tot productie en verkoop naar onze verdelers. Dat zult u merken aan de haarscherpe verhouding tussen prijs en kwaliteit.

LA FIXATION PAR SERTISSAGE DAS®

La fixation par sertissage DAS est LA référence dans le secteur. Cette technique est utilisée depuis 1975 par DAS Ladders et aujourd’hui, tous les produits DAS sont sertis par l’usine. Le résul-tat donne des matériaux résistants et durables, avec une belle finition, ce que l’on ne peut dire des articles qui utilisent des rivets tubulaires finissant par se détacher ou des soudures qui réduisent jusqu’à 65 % la résistance de l’alu-minium.

La fixation par sertissage DAS® est votre garantie d’une échelle résistante, solide, durable et à une finition parfaite.

SOUPLESSE

Notre longue connaissance du processus de pro-duction d’échelles aluminium et notre parc de machines fortement automatisé nous permettent d’absorber les soudaines hausses de demande et alterner rapidement entre grands et petits volumes.

EXCELLENT RAPPORT QUALITÉ-PRIX

DAS Ladders s’occupe de tout. Depuis la con-ception initiale jusqu’à la production et la vente à notre distributeurs. Constatez l’excellent rap-port qualité-prix.

DAS LADDERS - 3

Page 4: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

INDEX

PROFESSIONEEL • PROFESSIONNELHercules trapladder enkel ‘ano’Hercules trapladder dubbel ‘ano’

67

Escabeau Hercules simple ‘ano’ Escabeau Hercules double ‘ano’

Atlas ladder 1- en 2-delig ‘ano’Atlas ladder 3-delig ‘ano’

89

Echelle Atlas en 1 et 2 parties ‘ano’ Echelle Atlas en 3 parties ‘ano’

Hercules trapladder enkel ‘blue’Hercules trapladder dubbel ‘blue’

1011

Escabeau Hercules simple ‘bleu’ Escabeau Hercules double ‘bleu’

Atlas ladder 1- en 2-delig ‘blue’Atlas ladder 3-delig ‘blue’

1213

Echelle Atlas en 1 et 2 parties ‘bleu’ Echelle Atlas en 3 parties ‘bleu’

Yeti Pro - Multifunctionele ladder 14 Yeti Pro - Echelle multifonctionnel

Rollerstep 15 Rollerstep

SEMI-PROFESSIONEEL • SEMI-PROFESSIONNELPremium trapladder enkelPremium trapladder dubbel

1617

Escabeau Premium simple Escabeau Premium double

Vermeersch ladder 1- en 2-deligVermeersch ladder 3-delig

1819

Echelle Vermeersch en 1 et 2 parties Echelle Vermeersch en 3 parties

SPECIALSRechte trap 20 Escabeau simple

Voegtrap 20 Escabeau pour jointoyeurs

3-Poot Plukladder ‘brut’ 21 Echelle a cueillir ‘brut’

Schraag 21 Tréteau

Workstage ‘ano’ 22 Workstage ‘ano’

Workstage ‘blue’ 22 Workstage ‘bleu’

WHK 23 WHK

Touwoptrekladder 23 Echelle a cordes

XXL-Deck 24 XXL-Deck

Signaalladder 24 Echelle de signal

BRANDLADDER - ECHELLE DE SECOURSBrandladder 28 Echelle de secours

STEIGERS - ECHAFAUDAGESVouwsteiger 29-30 Echafaudage pliant

DAS 75 Rolsteiger 31-36 DAS 75 Echafaudage roulant

DAS 135 Rolsteiger 37-45 DAS 135 Echafaudage roulant

ACCESSOIRESAccessoires 25-26 Accessoires

WERKBRUG - PASSERELLEWerkbrug 27 Passerelle

MAATWERK - TRAVAIL SUR MESUREMaatwerk 46-49 Travail sur mesure

PERSONALISATIE - PERSONNALISATIONPersonalisatie 50 Personnalisation

NOTITIES - NOTESNotities 51 Notes

Page 5: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DUBBELE TRAP - DT4BESCABEAU DOUBLE - DT4B

ENKELE TRAP - ET4BESCABEAU SIMPLE - ET4B

REFORMLADDER 3 X 12 - G312B

ECHELLE TRANSFORMABLE 3 X 12 - G312B

* Neerklapbare beugel optioneel / Garde-corps pliable optionelle

HANDIGE GEVELROLLEN

UNIEKE GEÏNTEGREERDE SPREIDSTANDBEVEILIGING

ANODISATIE / POEDERLAKKEN VOORKOMT VUILE HANDEN EN CORROSIE

BREED STAVLAK MET ANTI-SLIPPROFIEL

ROBUUSTE LADDERVOETEN

STEVIGE OPSTEEKHAKEN MET OPSTEEKBEVEILIGING

ALLE ONDERDELEN ZIJN MAKKELIJK VERVANGBAAR

INOX BORGMOEREN

HANDIG MATERIAALBAKJE

ANODISATIE / POEDERLAKKEN VOORKOMT VUILE HANDEN EN CORROSIE

GEFELSTE TREDE-STIJLVERBINDING

ALLE ONDERDELEN ZIJN MAKKELIJK VERVANGBAAR

EXTRA BREDE TREDEN

GROOT STABORDES / LARGE PLATE-FORME

EXTRA ZWARE ANTISLIP VOET

VERNIEUWDE NEERKLAPBARE BEUGEL*

AFDEKKAPJES INVERFIJND,

NIEUW DESIGN

W A A R O M K I E Z E N V O O R

ROULETTES PRATIQUES

SYSTÈME UNIQUE ET INTEGRÉ EN POSITION OUVERTE

CONTRE-ÉCROUS INOX

LARGE SURFACE ET PROFIL ANTIDÉRAPANT

ANODISATION / LE REVÊTEMENT EVITE D’AVOIR LES MAINS SALE ET EMPÊCH LA CORROSION

CROCHETS FIABLES AVEC UN SYSTÈME DE BLOCAGE

PIED D’ÉCHELLE ROBUSTE

TOUS LES ÉLÉMENTS PEUVENT FACILEMENT ÊTRE REMPLACÉS

FINITIONS RAFFINÉES,NOUVEAU DESIGN

PETIT BAC À OUTILS

NOUVEAU GARDE CORPS MOBILE*

ANODISATION / LE REVÊTEMENT EVITE D’AVOIR LES MAINS SALE ET EMPÊCHE LA CORROSION

LARGE PIED ANTIDÉRAPANT SUPPLÉMENTAIRE

MARCHES EXTRA LARGES

FIXATION DES MARCHES AVEC LES MONTANTS PAR SERTISSAGE

TOUS LES ÉLÉMENTS PEUVENT FACILEMENT ÊTRE REMPLACÉS

POURQUOI CHOISIR DES ECHELLES

Page 6: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 6

PROFESSIONEEL • PROFESSIONNEL

HERCULES

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

1 x 3 ET3A 750 1540

1 x 4 ET4A 1000 1810

1 x 5 ET5A 1250 2100

1 x 6 ET6A 1500 2350

1 x 7 ET7A 1750 2620

1 x 8 ET8A 2000 2900

1 x 9 ET9A 2250 3170

1 x 10 ET10A 2500 3400

1 x 12 ET12A 3000 3980

HERCULES trapladder enkel ‘ano’HERCULES escabeau simple ‘ano’

VeiligheidsgarantieGarantie de sécurité

Page 7: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 7

PROFESSIONEEL • PROFESSIONNEL

HERCULES

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

2 x 2 DT2A 500 600

2 x 3 DT3A 750 850

2 x 4 DT4A 1000 1130

2 x 5 DT5A 1250 1415

2 x 6 DT6A 1500 1680

2 x 7 DT7A 1750 1960

2 x 8 DT8A 2000 2230

2 x 10 DT10A 2500 2770

2 x 12 DT12A 3000 3310

Vaste beugelGarde-corps fixe BEUGELV -- --

Neerklapbare beugel*Garde-corps pliable* BEUGELN -- --

HERCULES trapladder dubbel ‘ano’HERCULES escabeau double ‘ano’

VeiligheidsgarantieGarantie de sécurité

* =Vanaf DT4A / Disponible à partir de DT4A

Page 8: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 8

PROFESSIONEEL • PROFESSIONNEL

ATLAS

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

recht / droite

1 x 8 R108A 2,15 2,15

1 x 10 R110A 2,65 2,65

1 x 12 R112A 3,15 3,15

1 x 14 R114A 3,65 3,65

1 x 16 R116A 4,15 4,15

1 x 18 R118A 4,65 4,65

1 x 20 R120A 5,15 5,15

gebogen / evasée

1 x 8 G108A 2,13 2,13

1 x 10 G110A 2,63 2,63

1 x 12 G112A 3,13 3,13

1 x 14 G114A 3,63 3,63

1 x 16 G116A 4,13 4,13

1 x 18 G118A 4,63 4,63

1 x 20 G120A 5,13 5,13

dubbel / double

2 x 8 G208A 2,25 3,75

2 x 10 G210A 2,80 4,75

2 x 12* G212A 3,25 5,75

2 x 14* ** G214A 3,80 6,50

2 x 16* ** G216A 4,25 7,25

ATLAS ladder 1 en 2-delig ‘ano’ATLAS échelle en 1 et 2 parties ‘ano’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

VeiligheidsgarantieGarantie de sécurité

Page 9: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 9

PROFESSIONEEL • PROFESSIONNEL

ATLAS

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

3 x 8 G308A 2,25 5,25

3 x 10* G310A 2,80 6,25

3 x 12* G312A 3,25 7,75

3 x 14* ** G314A 3,80 9,05

3 x 16* ** G316A 4,25 10,25

ATLAS ladder 3-delig ‘ano’ATLAS échelle en 3 parties ‘ano’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

VeiligheidsgarantieGarantie de sécurité

Page 10: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 10

PROFESSIONEEL • PROFESSIONNEL

HERCULES

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de transport (mm)

1 x 3 ET3B 750 1540

1 x 4 ET4B 1000 1810

1 x 5 ET5B 1250 2100

1 x 6 ET6B 1500 2350

1 x 7 ET7B 1750 2620

1 x 8 ET8B 2000 2900

1 x 9 ET9B 2250 3170

1 x 10 ET10B 2500 3400

1 x 12 ET12B 3000 3980

HERCULES trapladder enkel ‘blue’HERCULES escabeau simple ‘bleu’

VeiligheidsgarantieGarantie de sécurité

Page 11: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 11

PROFESSIONEEL • PROFESSIONNEL

HERCULES

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

2 x 2 DT2B 500 600

2 x 3 DT3B 750 850

2 x 4 DT4B 1000 1130

2 x 5 DT5B 1250 1415

2 x 6 DT6B 1500 1680

2 x 7 DT7B 1750 1960

2 x 8 DT8B 2000 2230

2 x 10 DT10B 2500 2770

2 x 12 DT12B 3000 3310

Vaste beugelGarde-corps fixe BEUGELV -- --

Neerklapbare beugel*Garde-corps pliable* BEUGELN -- --

HERCULES trapladder dubbel ‘blue’HERCULES escabeau double ‘bleu’

VeiligheidsgarantieGarantie de sécurité

* =Vanaf DT4B / Disponible à partir de DT4B

Page 12: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 12

PROFESSIONEEL • PROFESSIONNEL

ATLAS

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

recht / droite

1 x 8 R108B 2,15 2,15

1 x 10 R110B 2,65 2,65

1 x 12 R112B 3,15 3,15

1 x 14 R114B 3,65 3,65

1 x 16 R116B 4,15 4,15

1 x 18 R118B 4,65 4,65

1 x 20 R120B 5,15 5,15

gebogen / evasée

1 x 8 G108B 2,13 2,13

1 x 10 G110B 2,63 2,63

1 x 12 G112B 3,13 3,13

1 x 14 G114B 3,63 3,63

1 x 16 G116B 4,13 4,13

1 x 18 G118B 4,63 4,63

1 x 20 G120B 5,13 5,13

dubbel / double

2 x 8 G208B 2,25 3,75

2 x 10 G210B 2,80 4,75

2 x 12* G212B 3,25 5,75

2 x 14* ** G214B 3,80 6,50

2 x 16* ** G216B 4,25 7,25

ATLAS ladder 1 en 2-delig ‘blue’ATLAS échelle en 1 et 2 parties ‘bleu’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

VeiligheidsgarantieGarantie de sécurité

Page 13: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 13

PROFESSIONEEL • PROFESSIONNEL

ATLAS

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

3 x 8 G308B 2,25 5,25

3 x 10* G310B 2,80 6,25

3 x 12* G312B 3,25 7,75

3 x 14* ** G314B 3,80 9,05

3 x 16* ** G316B 4,25 10,25

ATLAS ladder 3-delig ‘blue’ATLAS échelle en 3 parties ‘bleu’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

VeiligheidsgarantieGarantie de sécurité

Page 14: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 14

PROFESSIONEEL • PROFESSIONNEL

YETI PRO

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

ATransportlengte (m)Encombrement pour le transport (m)

BMin. lengte A-stand (m)Longueur min. en forme de V inversé (m)

CMax. lengte A-stand (m)Longueur max. en forme de V inversé (m)

4 x 3 YETI4X3 1,03 0,82 1,37

4 x 4 YETI4X4 1,31 1,09 1,93

4 x 5 YETI4X5 1,60 1,36 2,48

4 x 6 YETI4X6 1,88 1,64 3,02

YETI PRO - Multifunctionele ladder YETI PRO - Echelle multifonctionnel

Aantal sportenNombre d’échelons

DMin. lengte ladder (m)Longueur min. de l’échelle (m)

EMax. lengte ladder (m)Longueur max. de l’échelle (m)

FBreedte basis (m)Largeur à la base (m)

4 x 3 1,96 3,10 0,55

4 x 4 2,55 4,24 0,62

4 x 5 3,10 5,38 0,69

4 x 6 3,67 6,52 0,77

A

B

CD E

F

- Professionele multifunctionele telescopische ladder - 24 ladders in 1- www.yeti-pro.com

- Échelle professionelle télescopique multi- fonctions - 24 échelles en 1- www.yeti-pro.com

Page 15: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 15

PROFESSIONEEL • PROFESSIONNEL

ROLLERSTEP

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

2 x 3 ROLDT3A 800 900

2 x 4 ROLDT4A 1050 1180

2 x 5 ROLDT5A 1300 1465

2 x 6 ROLDT6A 1550 1730

2 x 7 ROLDT7A 1800 2010

2 x 8 ROLDT8A 2050 2280

Vaste beugelGarde-corps fixe BEUGELV -- --

Neerklapbare beugel*Garde-corps pliable* BEUGELN -- --

ROLLERSTEP ‘Ano’ROLLERSTEP ‘Ano’

* =Vanaf ROLDT4A / Disponible à partir de ROLDT4A

Page 16: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 16

SEMI-PROFESSIONEEL • SEMI-PROFESSIONNEL

PREMIUM

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

1 x 3 PET3 750 1540

1 x 4 PET4 1000 1810

1 x 5 PET5 1250 2100

1 x 6 PET6 1500 2350

1 x 7 PET7 1750 2620

1 x 8 PET8 2000 2900

PREMIUM trapladder enkel ‘brut’PREMIUM escabeau simple ‘brut’

Page 17: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 17

SEMI-PROFESSIONEEL • SEMI-PROFESSIONNEL

PREMIUM

Aantal tredenN° de marches

Artikelnr.N° d’article

Platform hoogte (mm)Hauteur plate-forme (mm)

Transportl. (mm)Longueur de tran-sport (mm)

2 x 2 PDT2 500 600

2 x 3 PDT3 750 850

2 x 4 PDT4 1000 1130

2 x 5 PDT5 1250 1415

2 x 6 PDT6 1500 1680

2 x 7 PDT7 1750 1960

2 x 8 PDT8 2000 2230

Vaste beugelGarde-corps fixe BEUGELV -- --

Neerklapbare beugel*Garde-corps pliable* BEUGELN -- --

PREMIUM trapladder dubbel ‘brut’PREMIUM escabeau double ‘brut’

* =Vanaf PDT4 / Disponible à partir de PDT4

Page 18: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 18

VERMEERSCH

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

recht / droite

1 x 8 V108R 2,15 2,15

1 x 10 V110R 2,65 2,65

1 x 12 V112R 3,15 3,15

1 x 14 V114R 3,65 3,65

1 x 16 V116R 4,15 4,15

1 x 18 V118R 4,65 4,65

1 x 20 V120R 5,15 5,15

gebogen / evasée

1 x 8 V108G 2,13 2,13

1 x 10 V110G 2,63 2,63

1 x 12 V112G 3,13 3,13

1 x 14 V114G 3,63 3,63

1 x 16 V116G 4,13 4,13

1 x 18 V118G 4,63 4,63

1 x 20 V120G 5,13 5,13

dubbel / double

2 x 8 V208 2,25 3,25

2 x 10 V210 2,80 4,25

2 x 12* V212 3,25 5,25

2 x 14* ** V214 3,80 6,00

2 x 16* ** V216 4,25 6,75

VERMEERSCH ladder 1 en 2-delig ‘brut’VERMEERSCH échelle en 1 et 2 parties ‘brut’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

SEMI-PROFESSIONEEL • SEMI-PROFESSIONNEL

Page 19: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 19

VERMEERSCH

Aantal sportenNombre d’échelons

Artikelnr.N° d’article

Ingeschoven (m)Fermée (m)

Uitgeschoven (m)Déployée (m)

3 x 8 V308 2,25 4,25

3 x 10* V310 2,80 5,75

3 x 12* V312 3,25 7,25

3 x 14* ** V314 3,80 8,05

VERMEERSCH ladder 3-delig ‘brut’VERMEERSCH échelle en 3 parties ‘brut’

* = met gevelrollen / avec roulettes de façade** = geen reform / échelle non transformable, échelle coulissante

SEMI-PROFESSIONEEL • SEMI-PROFESSIONNEL

Page 20: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 20

SPECIALS

Verdiephoogte (mm)Hauteur d’étage (mm)

Artikelnr.N° d’article

1 x 4 1000 MAG4

1 x 5 1250 MAG5

1 x 6 1500 MAG6

1 x 7 1750 MAG7

1 x 8 2000 MAG8

1 x 9 2250 MAG9

1 x 10 2500 MAG10

1 x 11 2750 MAG11

1 x 12 3000 MAG12

RECHTE TRAPESCABEAU SIMPLE

Platform-hoogte (mm)Hauteur plate-forme (mm)

Artikelnr.

N° d’article

1 x 4 1000 VOEG4

1 x 5 1250 VOEG5

1 x 6 1500 VOEG6

1 x 7 1750 VOEG7

VOEGTRAPESCABEAU POUR JOINTOYEURS

SPECIALS

Page 21: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 21

Lengte (m)longeur (m)

Artikelnr.N° d’article

1 x 8 2,13 DRIE08

1 x 10 2,63 DRIE10

1 x 12 3,13 DRIE12

1 x 14 3,63 DRIE14

1 x 16 4,13 DRIE16

3-POOT PLUKLADDER (brut)ECHELLE À CUEILLIR (brut)

Artikelnr.N° d’article

Zonder blokkeringSans blocage SCHRAAGZ

Met blokkeringAvec blocage SCHRAAGM

SCHRAAGTRÉTEAU

SPECIALS

SPECIALS

Page 22: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 22

SPECIALS

Artikelnr.N° d’article

Platformhoogte (mm)Hauteur plate-forme (mm)

Transportlengte (mm)Longueur transport (mm)

1 x 3 WS103B 750 1680

1 x 4 WS104B 1000 1955

1 x 5 WS105B 1250 2230

WORKSTAGE BlueWORKSTAGE Bleu

SPECIALS

WORKSTAGE AnoWORKSTAGE Ano

Artikelnr.N° d’article

Platformhoogte (mm)Hauteur plate-forme (mm)

Transportlengte (mm)Longueur transport (mm)

1 x 3 WS103A 750 1680

1 x 4 WS104A 1000 1955

1 x 5 WS105A 1250 2230

SPECIALS

Page 23: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 23

SPECIALS

Artikelnr.N° d’article

Platformhoog-te (mm)Hauteur plate-forme (mm)

Werkhoogte (mm)Hauteur tra-vaille (mm)

Lengte (mm)

Longueur (mm)

Breedte (mm)Largeur (mm)

1 x 2 WHK2 500 2500 1160 580

1 x 3 WHK3 750 2750 1290 580

WHKWHK

TOUWOPTREKLADDERECHELLE A CORDES

Artikelnr.N° d’article

Lengte uitgeschoven (m)Longueur deployée (m)

Transportlengte (m)Longueur transport (m)

Ano

2 x 12 T212A 5,75 3,25

2 x 14 T214A 6,50 3,80

2 x 16 T216A 7,25 4,25

2 x 18 T218A 8,00 4,75

2 x 20 T220A 8,75 5,25

Blue

2 x 12 T212B 5,75 3,25

2 x 14 T214B 6,50 3,80

2 x 16 T216B 7,25 4,25

2 x 18 T218B 8,00 4,75

2 x 20 T220B 8,75 5,25

SPECIALS

- Inclusief lifthendel /inclusive levier d’ascenseur- Op wieltjes / à roues- Afzonderlijke brochure beschikbaar / brochure séparé disponible

Page 24: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 24

Platform-hoogte (mm)Hauteur plateforme (mm)

Transportlengte (mm)Longueur de transport (mm)

Artikelnr.

N° d’article

1x3 750 1540 SL103

1x4 1000 1810 SL104

1x5 1250 2100 SL105

1x6 1500 2350 SL106

2x3 * 750 850 SL203

2x4 ** 1000 1130 SL204

2x5 ** 1250 1450 SL205

2x6 ** 1500 1680 SL206

SIGNAALLADDERECHELLE DE SIGNAL

XXL-DECKXXL-DECK

SPECIALS

* = inclusief vaste beugel / avec garde-corps fixe** = inclusief neerklapbare beugel / avec garde-corps pliable

SPECIALS

Aantal tredenN° de marches

Lengte (m)longeur (m)

Platformhoogte (m)Hauteur plate-forme (m)

Breedte (m)Largeur (m)

Artikelnr.N° d’article

2x2 1,22 0,53 0,41 XXLD

Page 25: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 25

ACCESSOIRES

TrapladdersEscabeaux

Artikelnr.N° d’article

Kleur / eenheidCouleurs / mesure

Grote voetjes (voor)Grand sabot

TVVB blauwbleu

Kleine voetjes (achter)Petit sabot

TVAB blauwbleu

Grote voetjes (voor)Grand sabot

TVVR roodrouge

Kleine voetjes (achter)Petit sabot

TVAR roodrouge

Beugel Vast Garde-corps fixe

BEUGELV aluminiumaluminium

Beugel NeerklapbaarGarde-corps pliable

BEUGELN aluminiumaluminium

MateriaalbakjeBac à outils

BAKJEB blauwbleu

MateriaalbakjeBac à outils

BAKJEZ zwartnoir

Vaste leuningMain courante fixe

LEUNINGTRAP Per tredepar marche

Afdekkapje linksCouverture gauche

AFDEKBL blauwbleu

Afdekkapje rechtsCouverture droite

AFDEKBR blauwbleu

Afdekkapje linksCouverture gauche

AFDEKZL zwartnoir

Afdekkapje rechtsCouverture droite

AFDEKZR zwartnoir

Voetjes /Sabots

Beugel vast /Garde-corps fixe

Verlengpoot / Pied (allonge)

Ladderbankje / Banquette

ACCESSOIRES

Yeti-ProYeti-Pro

Artikelnr.N° d’article

Lengte (m)Fermée (m)

Breedte (cm)Déployée (m)

LadderbankjeBanquette d’échelle YETIBANK -- --

VerlengpootPied (allonge) YETIPOOT -- --

Page 26: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 26

ACCESSOIRES

LaddersEchelles

Artikelnr.N° d’article

KleurCouleur

Toprol * Roulette murale*

TOPRB blauwbleu

Toprol *Roulette murale *

TOPRR roodrouge

Rubber voet klein Petit sabot

VL65B blauwbleu

Rubber voet grootGrand sabot

VL75B blauwbleu

Rubber voet kleinPetit sabot

VL65R roodrouge

Rubber voet grootGrand sabot

VL75R roodrouge

Kantelvoetje **Pied pivotant **

KANTELV roodrouge

Nokhaak *Crochet pour faîtière *

NOKH --

StabilisatiebalkStabilisateur

STAB --

Haken gemonteerd 30mm *Crochets montés 30mm *

HAAKM --

StellinghaakTaquets pour échelles

STELH --

Opsteekhaak linksCrochet attaché gauche

LOHL --

Opsteekhaak rechtsCrochet attaché droite

LOHR --

Alu voetpin **Repose-pied alu **

PINNEN --

Toprol / Roulette murale

ACCESSOIRES

* = per paar / par couple** = excl. montage / sans montage

Stellinghaak / Taquets pour échelles

Vaste leuning / Main courante fixe

Kantelvoetje / Pied pivotant

Alu voetpin / Repose-pied alu

Nokhaak / Crochet pour faîtière

Page 27: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 27

OmschrijvingDescription

Artikelnr.N° d’article

Werkbrug 4m x 0,60mPasserelle 4m x 0,60m 891410

Leuningwerk 4m*:Garde-corps 4m:*

2 x leuningstaander complète + 2 x leuningschoor (heupschoor + knieschoor)2 x rampes complète + 2 x entretoises de rampe (entretoise de hanche + entrtoise de genou) 891411

WERKBRUG

Ophanghaak t.b.v. werkbrug (prijs per stuk, 4 per werkbrug)Crochet de suspention pour passerelle (prix par pièce, 4 par passerelle) 891210

Leuningstaander compleetRampe complète 891211

Te combineren met stellinghaak / a combiner avec des taquets pour échelles

WERKBRUGPASSERELLE

Werkbrug 5m x 0,60mPasserelle 5m x 0,60m 891510

Leuningwerk 5m*:Garde-corps 5m*:

3 x leuningstaander compleet + 2 x leuningschoor (heupschoor + knieschoor)3 x rampes complète + 2 x entretoises de rampe (entretoise de hanche + entrtoise de genou) 891511

Werkbrug 6m x 0,60mPasserelle 6m x 0,60m 891610

Leuningwerk 6m*:Garde-corps 6m*:

3 x leuningstaander compleet + 2 x leuningschoor (heupschoor + knieschoor)3 x rampes complète + 2 x entretoises de rampe (entretoise de hanche + entrtoise de genou) 891611

Werkbrug 7m x 0,60mPasserelle 7m x 0,60m 891710

Leuningwerk 7m*:Garde-corps 7m*:

3 x leuningstaander compleet + 2 x leuningschoor (heupschoor + knieschoor)3 x rampes complète + 2 x entretoises de rampe (entretoise de hanche + entrtoise de genou) 891711

* Leuningwerk aan 1 zijde* Garde-corps à un côté

Page 28: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 28

BRANDLADDER • ECHELLE DE SECOURS

BRANDLADDERECHELLE DE SECOURS

ArtikelArticle

Artikelnr.N° d’article

EenheidPiece

Geanodiseerde brandladder met kooiEchelle de secours anodisée avec cage

brandmk Per meterPar mètre

Geanodiseerde brandladder zonder kooiEchelle de secours anodisée sans cage

brandzk Per meterPar mètre

KooiringCercle

ring

Telescopische handgreepCrosse amouble

handv

Aluminium kokerTube alu

aluk Per meterPar mètre

Deur (blank aluminium)Porte (non anodisée)

deur

DoorklimbeveiligingProtection de fenêtre

doork

Uitstap 50 x 50Marche 50 x 50

uitstap50 Per paarPar couple

Uitstap 75 x 50Marche 75 x 50

uitstap75 Per paarPar couple

VoetplaatPlaque de base

voetp

Afstandhouder 220 type rechtCrochets muraux 220 - droite

afst220R Per paarPar couple

Afstandhouder 220 type consoleCrochets muraux 220 - console

afst220C Per paarPar couple

Afstandhouder 660 type rechtCrochets muraux 660 - droit

afst660R Per paarPar couple

Afstandhouder 660 type consoleCrochets muraux 660 - console

afst660C Per paarPar couple

Bordes 600 x 660Plateau 600 x 660

bord600

Bordes 1200 - 1800 x 600Plateau 1200 - 1800 x 600

bord1200

Bordes 1800 - 2500 x 660Plateau 1800 - 2500 x 660

bord1800

Zelfsluitend poortjePorte à fermeture automatique

poortsl

Automatische ontgrendelingspedaalPédale de déverrouillage automatique

pedaal

Koppelstuk gemonteerdPièce de jonction montée

KOPPELB Per paarPar couple

Page 29: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 29

STEIGERS • ECHAFAUDAGES

VOUWSTEIGER COMPLEET (0,75m x 1,90m)*ECHAFAUDAGE PLIANT COMPLET (0,75m x 1,90m)*

VOUWSTEIGERECHAFAUDAGE PLIANT

Artikelnr.N°d’article

OmschrijvingDescription

Platformhoogte (m)Haut. plate-forme (m)

Werkhoogte (m)Hauteur de travail (m)

40005000 Vouwsteiger compleet basispakketEchafaudage pliant complet paquet de base 1,00 3,00

40004900 Vouwsteiger compleet met luikEchafaudage pliant complet avec trappe 1,00 3,00

Vouwsteigerframe 6 sporten /Cadre pliant 6 échelons

Platform 1,90m met of zonder luik /Plate-forme avec ou sans trappe 1,90m

Vouwsteigerwiel diam. 125mm /Roue pivotante 125mm

Artikelnr.N°d’article

OmschrijvingDescription

840241 Vouwsteigerframe 3 sportenCadre pliant 3 échelons

830321 Horizontaalschoor 1,90mEntretoise horiz. 1,90m

830326 Diagonaalschoor 1,90mEntretoise diag. 1,90m

840210 Vaste stabilisator 2,00mStabilisateur fixe 2,00m

840230 Aluminium kantplankset 0,75 x 1,90mJeu de plinthes alu. 0,75 x 1,90m

830300 Leuningframe 75-2Garde-corps 75-2

UITBREIDINGSOPTIES VOUWSTEIGEROPTIONS D’EXTENSION D’ECHAFAUDAGE PLIANT

Page 30: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 30

Artikelnr.N°d’article

OmschrijvingDescription

BasisBase

PLATFORMHOOGTE (m)HAUTEUR PLATE-FORME (m) 1,00 1,80 2,70 3,80 5,80 7,80

WERKHOOGTE (m)HAUTEUR DE TRAVAIL (m) 3,00 3,80 4,70 5,80 7,80 9,8

840244 Vouwsteigerframe 6 sportenCadre pliant 6 échelons 1 1 1 1 1 1

840241 Vouwsteigerframe 3 sportenCadre pliant 3 échelons 1 1

830303 Opbouwframe 75-28-7Cadre 75-28-7 2 4 6

840105 Platform 1,90m met luikPlate-forme avec trappe 1,90m 1 1 1 2 2

840100 Platform 1,90m zonder luikPlate-forme sans trappe 1,90m 1

840242 Vouwsteigerwiel diam. 125mmRoue pivotante 125mm 4 4 4 4

840246 Vouwsteigerwiel diam. 150mmRoue pivotante 150mm

840202 Wiel 200 mm nylon met alu spindelRoue 200 mm nylon avec axe alu 4 4

830321 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 3 5 5 9 9

830326 Diagonaalschoor 1,90mEntretoise diag. 1,90m 1 3 5 7

830300 Leuningframe 75-2Garde-corps 75-2 2 2 2 2

840230 Aluminium kantplankset 0,75 x 1,90mJeu de plinthes alu. 0,75 x 1,90m 1 1 1 1

840212 Telestabilisator 2,00mTelestabilisateur 2,00m 2 2

840213 Telestabilisator 3,00mTelestabilisateur 3,00m 2 2

830342 BorgpenGoupille 5 5 14 13 13 21

VOUWSTEIGER COMBINATIES (0,75m x 1,90m)COMBINATIONS D’ECHAFAUDAGE PLIANT (0,75m x 1,90m)

VOUWSTEIGERECHAFAUDAGE PLIANT

STEIGERS • ECHAFAUDAGES

Page 31: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 31

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 0,75 x 1,90m DAS ECHAFAUDAGE ROULANT 0,75 x 1,90m

DAS 75 ROLSTEIGER - 1,90DAS 75 ECHAFAUDAGE ROULANT - 1,90

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830099

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

2 Opbouwframe 75-28-7Cadre 75-28-7 830303

2 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

6 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

1 Platform 1,90m met luikPlate-forme avec trappe 1,90m 840105

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 0,75 x 1,90mJeu de plinthes alu 0,75 x 1,90m 840230

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 6,20m)*

830100

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

4 Opbouwframe 75-28-7Cadre 75-28-7 830303

4 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

6 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

1 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2,00mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 0,75 x 1,90mJeu de plinthes alu 0,75 x 1,90m 840230

8 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden. *) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

Page 32: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 32

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830101

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

6 Opbouwframe 75-28-7Cadre 75-28-7 830303

6 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

10 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

2 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelesabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 1,90mJeu de plinthes alu 0,75 x 1,90m 840230

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830102

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

8 Opbouwframe 75-28-7Cadre 75-28-7 830303

8 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

10 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

2 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelesabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 1,90mJeu de plinthes alu 0,75 x 1,90m 840230

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

OmschrijvingDescription

Artikelnr.N° d’article

Opbouwframe 75-28-4Cadre 75-28-4 830302

Carbon deck zonder luik 1,90mCarbon deck sans trappe 1,90m 840120

Carbon deck met luik 1,90mCarbon deck avec trappe 1,90m 840125

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 0,75 x 1,90m DAS ECHAFAUDAGE ROULANT 0,75 x 1,90m

Page 33: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 33

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 0,75 x 2,45m DAS ECHAFAUDAGE ROULANT 0,75 x 2,45m

DAS 75 ROLSTEIGER - 2,45DAS 75 ECHAFAUDAGE ROULANT - 2,45

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830109

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

2 Opbouwframe 75-28-7Cadre 75-28-7 830303

2 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

6 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

1 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 0,75 x 2,45mJeu de plinthes alu 0,75 x 2,45m 840231

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 4,20m)*

830110

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

4 Opbouwframe 75-28-7Cadre 75-28-7 830303

4 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

6 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

1 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2.00 mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 0,75 x 2,45mJeu de plinthes alu 0,75 x 2,45m 840231

8 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

Page 34: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 34

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830111

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

6 Opbouwframe 75-28-7Cadre 75-28-7 830303

6 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

10 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

2 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 2,45mJeu de plinthes alu 0,75 x 2,45m 840231

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830112

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

8 Opbouwframe 75-28-7Cadre 75-28-7 830303

8 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

10 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

2 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 2,45mJeu de plinthes alu 0,75 x 2,45m 840231

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden. *) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

OmschrijvingDescription

Art. Nr.N° d’article

Opbouwframe 75-28-4Cadre 75-28-4 830302

Carbon deck zonder luik 2,45mCarbon deck sans trappe 2,45m 840121

Carbon deck met luik 2,45mCarbon deck avec trappe 2,45m 840126

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 0,75 x 2,45m DAS ECHAFAUDAGE ROULANT 0,75 x 2,45m

Page 35: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 35

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 0,75 x 3,05m DAS ECHAFAUDAGE ROULANT 0,75 x 3,05m

DAS 75 ROLSTEIGER - 3,05 DAS 75 ECHAFAUDAGE ROULANT - 3,05

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830119

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

2 Opbouwframe 75-28-7Cadre 75-28-7 830303

2 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

6 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

1 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 0,75 x 3,05mJeu de plinthes alu 0,75 x 3,05m 840232

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 6,20m)*

830120

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

4 Opbouwframe 75-28-7Cadre 75-28-7 830303

4 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

6 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

1 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2,00mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 0,75 x 3,05mJeu de plinthes alu 0,75 x 3,05m 840232

8 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

Page 36: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 36

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N° d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830121

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

6 Opbouwframe 75-28-7Cadre 75-28-7 830303

6 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

10 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

2 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3.00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 3,05mJeu de plinthes alu 0,75 x 3,05m 840232

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830122

2 Leuningframe 75-50-2Garde-corps 75-50-2 830300

8 Opbouwframe 75-28-7Cadre 75-28-7 830303

8 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

10 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

2 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 0,75 x 3,05mJeu de plinthes alu 0,75 x 3,05m 840232

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

OmschrijvingDescription

Artikelnr.N° d’article

Opbouwframe 75-28-4Cadre 75-28-4 830302

Carbon deck zonder luik 3,05mCarbon deck sans trappe 3,05m 840122

Carbon deck met luik 3,05mCarbon deck avec trappe 3,05m 840127

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 0,75 x 3,05m DAS ECHAFAUDAGE ROULANT 0,75 x 3,05m

Page 37: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 37

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 1,35 x 1,90m DAS ECHAFAUDAGE ROULANT 1,35 x 1,90m

DAS 135 ROLSTEIGER - 1,90DAS 135 ECHAFAUDAGE ROULANT - 1,90

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830199

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

2 Opbouwframe 135-28-7Cadre 135-28-7 830308

4 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

6 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

1 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

1 Platform 1,90m zonder luikPlate-forme 1,90m sans trappe 840100

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 1,35 x 1,90mJeu de plinthes alu 1,35 x 1,90m 840235

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 6,20m)*

830200

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

4 Opbouwframe 135-28-7Cadre 135-28-7 830308

8 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

6 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

1 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

1 Platform 1,90m zonder luikPlate-forme 1,90m sans trappe 840100

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2,00mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 1,35 x 1,90mJeu de plinthes alu 1,35 x 1,90m 840235

8 BorgpenGoupille 830342

STEIGERS • ECHAFAUDAGES

Page 38: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 38

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830201

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

6 Opbouwframe 135-28-7Cadre 135-28-7 830308

12 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

10 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

2 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

2 Platform 1,90m zonder luikPlate-forme 1,90m sans trappe 840100

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 190mJeu de plinthes alu 1,35 x 1,90m 840235

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830202

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

8 Opbouwframe 135-28-7Cadre 135-28-7 830308

16 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

10 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

2 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

2 Platform 1,90m zonder luikPlate-forme 1,90m sans trappe 840100

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 1,90mJeu de plinthes alu 1,35 x 1,90m 840235

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

DAS ROLSTEIGER 1,35 x 1,90m DAS ECHAFAUDAGE ROULANT 1,35 x 1,90m

Page 39: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 39

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 10,20m (Werkhoogte: 12,20m)*Hauteur plate-forme: 10,20m (Hauteur de travail: 12,20m)*

830203

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

10 Opbouwframe 135-28-7Cadre 135-28-7 830308

20 Diagonaalschoor 1,90mEntretoise diag. 1,90m 830326

14 Horizontaalschoor 1,90mEntretoise horiz. 1,90m 830321

3 Platform 1,90m met luikPlate-forme 1,90m avec trappe 840105

3 Platform 1,90m zonder luikPlate-forme 1,90m sans trappe 840100

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 1,90mJeu de plinthes alu 1,35 x 1,90m 840235

20 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N° d’article

Opbouwframe 135-28-4Cadre 135-28-4 830307

Carbon deck zonder luik 1,90mCarbon deck sans trappe 1,90m 840120

Carbon deck met luik 1,90mCarbon deck avec trappe 1,90m 840125

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 1,35 x 1,90m DAS ECHAFAUDAGE ROULANT 1,35 x 1,90m

Page 40: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 40

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 1,35 x 2,45m DAS ECHAFAUDAGE ROULANT 1,35 x 2,45m

DAS 135 ROLSTEIGER - 2,45DAS 135 ECHAFAUDAGE ROULANT - 2,45

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830209

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

2 Opbouwframe 135-28-7Cadre 135-28-7 830308

4 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

6 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

1 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

1 Platform 2,45m zonder luikPlate-forme 2,45m sans trappe 840101

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 1,35 x 2,45mJeu de plinthes alu 1,35 x 2,45m 840236

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 6,20m)*

830210

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

4 Opbouwframe 135-28-7Cadre 135-28-7 830308

8 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

6 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

1 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

1 Platform 2,45m zonder luikPlate-forme 2,45m sans trappe 840101

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2,00mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 1,35 x 2,45mJeu de plinthes alu 1,35 x 2,45m 840236

8 BorgpenGoupille 830342

Page 41: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 41

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830211

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

6 Opbouwframe 135-28-7Cadre 135-28-7 830308

12 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

10 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

2 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

2 Platform 2,45m zonder luikPlate-forme 2,45m sans trappe 840101

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 2,45mJeu de plinthes alu 1,35 x 2,45m 840236

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830212

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

8 Opbouwframe 135-28-7Cadre 135-28-7 830308

16 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

10 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

2 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

2 Platform 2,45m zonder luikPlate-forme 2,45m sans trappe 840101

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 2,45mJeu de plinthes alu 1,35 x 2,45m 840236

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden. *) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 1,35 x 2,45m DAS ECHAFAUDAGE ROULANT 1,35 x 2,45m

Page 42: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 42

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 10,20m (Werkhoogte: 12,20m)*Hauteur plate-forme: 10,20m (Hauteur de travail: 12,20m)*

830213

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

10 Opbouwframe 135-28-7Cadre 135-28-7 830308

20 Diagonaalschoor 2,45mEntretoise diag. 2,45m 830327

14 Horizontaalschoor 2,45mEntretoise horiz. 2,45m 830322

1 Platform 2,45m met luikPlate-forme 2,45m avec trappe 840106

5 Platform 2,45m zonder luikPlate-forme 2,45m sans trappe 840101

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

4 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 2,45mJeu de plinthes alu 1,35 x 2,45m 840236

20 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

OmschrijvingDescription

Artikelnr.N° d’article

Opbouwframe 135-28-4Cadre 135-28-4 830307

Carbon deck zonder luik 2,45mCarbon deck sans trappe 2,45m 840121

Carbon deck met luik 2,45mCarbon deck avec trappe 2,45m 840126

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 1,35 x 2,45m DAS ECHAFAUDAGE ROULANT 1,35 x 2,45m

Page 43: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 43

STEIGERS • ECHAFAUDAGES

DAS ROLSTEIGER 1,35 x 3,05m DAS ECHAFAUDAGE ROULANT 1,35 x 3,05m

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 2,20m (Werkhoogte: 4,20m)*Hauteur plate-forme: 2,20m (Hauteur de travail: 4,20m)*

830219

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

2 Opbouwframe 135-28-7Cadre 135-28-7 830308

4 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

6 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

1 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

1 Platform 3,05m zonder luikPlate-forme 3,05m sans trappe 840102

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

1 Aluminium kantplankenset 1,35 x 3,05mJeu de plinthes alu 1,35 x 3,05m 840237

4 BorgpenGoupille 830342

Platformhoogte: 4,20m (Werkhoogte: 6,20m)*Hauteur plate-forme: 4,20m (Hauteur de travail: 6,20m)*

830220

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

4 Opbouwframe 135-28-7Cadre 135-28-7 830308

8 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

6 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

1 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

1 Platform 3,05m zonder luikPlate-forme 3,05m sans trappe 840102

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 2,00mTelestabilisateur 2,00m 840212

1 Aluminium kantplankenset 1,35 x 3,05mJeu de plinthes alu 1,35 x 3,05m 840237

8 BorgpenGoupille 830342

DAS 135 ROLSTEIGER - 3,05DAS 135 ECHAFAUDAGE ROULANT - 3,05

STEIGERS • ECHAFAUDAGES

Page 44: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 44

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 6,20m (Werkhoogte: 8,20m)*Hauteur plate-forme: 6,20m (Hauteur de travail: 8,20m)*

830221

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

6 Opbouwframe 135-28-7Cadre 135-28-7 830308

12 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

10 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

2 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

2 Platform 3,05m zonder luikPlate-forme 3,05m sans trappe 840102

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 3,05mJeu de plinthes alu 1,35 x 3,05m 840237

12 BorgpenGoupille 830342

Platformhoogte: 8,20m (Werkhoogte: 10,20m)*Hauteur plate-forme: 8,20m (Hauteur de travail: 10,20m)*

830222

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

8 Opbouwframe 135-28-7Cadre 135-28-7 830308

16 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

10 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

2 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

2 Platform 3,05m zonder luikPlate-forme 3,05m sans trappe 840102

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

2 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 3,05mJeu de plinthes alu 1,35 x 3,05m 840237

16 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.`*) Si l’échafaudage est utilisé dans cette configuration comme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

DAS ROLSTEIGER 1,35 x 3,05m DAS ECHAFAUDAGE ROULANT 1,35 x 3,05m

Page 45: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 45

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N°d’article

Platformhoogte: 10,20m (Werkhoogte: 12,20m)*Hauteur plate-forme: 10,20m (Hauteur de travail: 12,20m)*

830223

2 Leuningframe 135-50-2Garde-corps 135-50-2 830305

10 Opbouwframe 135-28-7Cadre 135-28-7 830308

20 Diagonaalschoor 3,05mEntretoise diag. 3,05m 830328

14 Horizontaalschoor 3,05mEntretoise horiz. 3,05m 830323

5 Platform 3,05m met luikPlate-forme 3,05m avec trappe 840107

1 Platform 3,05m zonder luikPlate-forme 3,05m sans trappe 840102

4 Wiel 200 mm nylon met aluminium spindelRoue 200 mm nylon avec axe alu 840202

4 Telestabilisator 3,00mTelestabilisateur 3,00m 840213

1 Aluminium kantplankenset 1,35 x 3,05mJeu de plinthes alu 1,35 x 3,05m 840237

20 BorgpenGoupille 830342

*) Indien de steiger in deze configuratie toegepast wordt als vrijstaande steiger, dienen er rondom 4 stabilisatoren toegepast te worden.*) Si l’échafaudage est utilisé dans cette configurationomme échafaudage autoportant, il faut placer 4 stabilisateurs autour.

STEIGERS • ECHAFAUDAGES

OmschrijvingDescription

Artikelnr.N° d’article

Opbouwframe 135-28-4Cadre 135-28-4 830307

Carbon deck zonder luik 3,05mCarbon deck sans trappe 3,05m 840122

Carbon deck met luik 3,05mCarbon deck avec trappe 3,05m 840127

Vaste stabilisator 2,00mStabilisateur fixe 2,00m 840210

Vaste stabilisator 3,00mStabilisateur fixe 3,00m 840211

EXTRA ONDERDELEN / COMPOSANTS SUPPLÉMENTAIRES

DAS ROLSTEIGER 1,35 x 3,05m DAS ECHAFAUDAGE ROULANT 1,35 x 3,05m

Page 46: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 46

MOBIELE TRAP 67 MET 2 VASTE WIELEN / PLATE-FORME MOBILE 67 AVEC 2 ROUES FIXE

OVERZETTRAP 45 / ÉTAPE DE TRANSFERT 45

(kg)Aantal treden / N° de marches

Hoogte /Hauteur (mm)

Breedte / Largeur (mm)

Diepte bordes (mm) /Profondeur plate-forme (mm)

Gewicht (kg) /Poids (kg)

3 750 600 600 22

4 1000 600 600 24

5 1200 600 600 26

6 1500 600 600 28

7 1750 600 600 30

8 2000 600 600 32

9 2250 600 600 34

10 2500 600 600 36

Aantal treden / N° de marches

Hoogte /Hauteur (m)

Diepte overkapping (m) /Profondeur (m)

Breedte / Largeur (m)

3 600 900 600

4 800 900 600

5 1000 900 600

6 1200 900 600

7 1400 900 600

8 1600 900 600

10 1800 900 600

MAATWERK • TRAVAIL SUR MESURE

MAATWERKTRAVAIL SUR MESURE

Page 47: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 47

MAATWERK • TRAVAIL SUR MESURE

MOBIELE TRAP 45 WIELEN MET REM / PLATE-FORME MOBILE 45 ROUES AVEC FREIN

MOBIELE TRAP 45 CENTRALE VERGRENDELING / PLATE-FORME MOBILE AVEC BLOCAGE CENTRAL 45

VASTE TRAP 45 / PLATE-FORME FIXE 45

Aantal treden / N° de marches

Hoogte /Hauteur (mm)

Breedte / Largeur (mm)

Diepte bordes (mm) /Profondeur plate-forme (mm)

Gewicht (kg) /Poids (kg)

5 1000 800 800 64

6 1200 800 800 68

7 1400 800 800 71

8 1600 800 800 75

9 1800 800 800 79

10 2000 800 800 83

11 2200 800 800 88

12 2400 800 800 92

Aantal treden / N° de marches

Hoogte /Hauteur (mm)

Breedte / Largeur (mm)

Diepte bordes (mm) /Profondeur plate-forme (mm)

Gewicht (kg) /Poids (kg)

5 1000 800 800 70

6 1200 800 800 74

7 1400 800 800 77

8 1600 800 800 81

9 1800 800 800 85

10 2000 800 800 89

11 2200 800 800 94

12 2400 800 800 98

Aantal treden / N° de marches

Hoogte /Hauteur (mm)

Breedte / Largeur (mm)

Diepte bordes (mm) /Profondeur plate-forme (mm)

5 1000 800 670

6 1200 800 670

7 1400 800 670

8 1600 800 670

9 1800 800 670

10 2000 800 670

11 2200 800 670

12 2400 800 670

Page 48: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

DAS LADDERS - 48

MOBIEL VERRIJDBAAR BORDES / PLATE-FORME MOBILE ROULANTE

OPKLAPBAAR RIJDEEL / ÉLÉMENT DE ROULEAU PLIANT

MAATWERK • TRAVAIL SUR MESURE

MAATWERKTRAVAIL SUR MESURE

Page 49: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 49

HELIKOPTERPLATFORM / PLATE-FORME HELICOPTÈRE

MOBIELE TRAPPEN / ESCABEAUX MOBILESMOBIEL PLOOIBAAR BORDES / PLATE-FORME MOBILE PLIABLE

ALLE BORDESSEN, TRAPPEN EN LEUNINGEN ZIJN CONFORM DE NORM EN 14122-3TOUS LES LES PASSERELLES, ESCALIERS ET RAMPES SONT CONFORMES À LA NORME EN 14122-3

MAATWERK • TRAVAIL SUR MESURE

Page 50: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

PERSONALISEER UW LADDER

U bent verantwoordelijk voor de aankoop van ladders / trapladders en uw bedrijf wenst te werken met gepersonaliseerde klimmaterialen, volledig in eigen huisstijl en duidelijk herkenbaar (ook tegen diefstal!)? DAS Ladders ontwerpt en produceert uw ladder in eender welke RAL-kleur. Onze dealers geven u graag advies.

Personaliseer uw ladder naar wens!

- Kleur van de ladder (zijbomen)- Laddervoeten - Kunststof onderdelen - Bestickering

PERSONNALISEZ VOTRE ÉCHELLE

Vous êtes responsable d’achat des escabeaux et des échelles et votre societé souhaite person-naliser tous vos articles dans le style de l’entre-prise et clairement identifiables (aussi comme protection contre le vol)? DAS Ladders conçoit et fabrique vos échelles dans n’importe quel coloris RAL. Nos concessionnaires officiels vous conseille-ront volontiers.

Personnalisez votre échelle!

- Couleur (du montant latéral) - Sabots - Pièces en plastique - Lettrage et autocollants

PERSONALISATIEPERSONNALISATION

DAS LADDERS - 50

PERSONALISATIE • PERSONNALISATION

Page 51: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

L A D D E R S

DAS LADDERS - 51

NOTITIES / NOTES

.................................................................................................................................

...........................................................................................................................................

................................................................................................................................................

.....................................................................................................................................................

.......................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

........................................................................................................................................................

.......................................................................................................................................................

....................................................................................................................................................

...............................................................................................................................................

.......................................................................................................................................

NOTITIES / NOTES

Page 52: DAS LADDERS1 x 12 R112A 3,15 3,15 1 x 14 R114A 3,65 3,65 1 x 16 R116A 4,15 4,15 1 x 18 R118A 4,65 4,65 1 x 20 R120A 5,15 5,15 gebogen / evasée 1 x 8 G108A 2,13 2,13 1 x 10 G110A 2,63

Alle informatie is onder voorbehoud van prijswijzigingen, typefouten, vergissingen en marktontwikkelingen. De getoonde afbeeldingen zijn louter ter illustratie. Toute information est sujette à des changements de prix, fautes de frappe, erreurs et l’évolution du marché. Les images montrées sont illustratifs.

DAS LADDERS Stadsbeemd 14103545 Halen

Telefoon +32 13 44 23 60 Fax +32 13 44 49 [email protected]

L A D D E R S

HAD IK NU MAAREEN DAS -LADDER...

SI AU MOINS J’AVAISUNE ECHELLE DAS ...

W W W . D A S L A D D E R S . B E