Danfoss Packaged Drive Solutions · bridge to ensure appropriate load sharing and harmonic...
Transcript of Danfoss Packaged Drive Solutions · bridge to ensure appropriate load sharing and harmonic...
Danfoss Packaged Drive Solutions12-Pulse & 18-Pulse Low Harmonic Solutions
Performance Range480 volt, 15 to 250 hp
EnclosuresNEMA 1, 12, 3R
Compact, cost-effective and completely integrated system solutions for applications requiring enhanced harmonic control. Packages seamlessly combine the reliability and advanced performance of the VLT® Series Drives with Best in Class 12 & 18 pulse harmonic reduction technology. The result is a complete solution from the supplier you trust.
Low Harmonic Solution Benefits• MeetIEEE519-1992atdriveinput
terminals (18-pulse)
• HelpmeetIEEE519-1992atthesystem level
• Improvedtotalpowerfactor
• Noexternalfiltersor transformers needed
• Improvesoverallelectricalsystemefficiency
Package Features
Product Range
• 460-480vac+/-10%
• 15to250HP
• -10oto+40o C (14o-104o F) ambient
Package configurations
• Mainfuseddisconnect
• Mainfuseddisconnect,VFDfusing,3-contactor bypass, advanced relay logicincluding;commonstart/stopin VFD and bypass mode, automatic bypass on failure, run permissive circuit in VFD and bypass modes, and under voltage protection in bypass
• Addreducedvoltagesolidstatesoftstartertoanybypassconfiguration
Enclosure Options
• FloormountedpanelswithNEMAUL Type Ratings 1, 12, & 3R
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in thismaterialarepropertyoftherespectivecompanies.DanfossandtheDanfosslogotypearetrademarksofDanfossA/S.Allrightsreserved.
©Copyright2011byDanfoss06/11 177R0128
www.danfossdrives.com
Danfoss VLT Drives8800 W. Bradley Road Milwaukee,WI53224,USA Phone: 1.800.621.8806 1.414.355.8800 FAX: 1.414.355.6117
Danfoss VLT Drives4401 N. Bell School Road LovesPark,IL61111,USA Phone: 1.800.432.6367 1.815.639.8600 FAX: 1.815.639.8002
Best In Class Designs:
All Units
Each unit will ship completely assembled in a free standing enclosure labeled as conforming to UL Type 1, 12, or 3R environmental protection as required by the installation. Units require simple four-wire-in and four-wire-out power connections.TheentirepackageisUL508AIndustrialControlPanel.
12-Pulse
All12-pulsebridgesareseparatefromtheVFD’srectifiers.ThesebridgesareseparatefromtheVFD’sstandard6-pulsebridge to ensure appropriate load sharing and harmonic reduction.Inputtotherectifiersisanelectro-staticallyshielded phase shifting drive isolation transformer.
18-Pulse
All18-pulseunitsincludethree6diodebridgerectifiers.ThesebridgesareseparatefromtheVFDsstandard6-pulsebridge to ensure appropriate load sharing and harmonic reduction.Inputtotherectifiersisanauto-transformerwiththe following design criteria:
• Automaticshutdownwithphaseloss.
• Integralhighimpedancelinereactormatedwiththetransformer by the transformer manufacture to ensure optimum performance.
• Newesttopologythatwillperformasdesignedonaphaseunbalanceupto2%.Olderdesigntopologieshavelessperformanceonvoltageunbalance,usuallyspecifiedas1/2%unbalance.
• Thermalswitchoneachtransformercoil.
Separate multi-pulse bridges
and fusing for improved performance
Transformer and balancing
reactor matched and tested
for improved performance.
Advanced VLT Drive
VFD output, input and bypass
contactors