Dali lighting products catalogue v2
-
Upload
cms-electracom -
Category
Documents
-
view
255 -
download
11
description
Transcript of Dali lighting products catalogue v2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
14.1.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
CMS Quick Flex 5 Pole Cabling Solution
The CMS 5 Pole product is a tried and tested system being used into major projects across Australia
and New Zealand for the past ten years. The CMS Quick flex cabling solution is a modular five pole
softwiring system for Dali, DSI, CBUS, KNX & other systems requiring 5 wire lighting systems. CMS
Quick Flex Cabling has its own unique CMS connector system which insures excellent conductivity
without the concern of separation at joints. Connectors can only be separated by a tool.
CMS Quick Flex Cabling Solution is ideal for the following applications: Education, Retail, Health,
Commercial Offices, Airports & Public Sectors.
CMS Electracom are able to supply large quantities of our Quick flex products, in most cases, at short
notice due to large stockholdings across all major capital cities in Australia and New Zealand. The
existing relationships with prominent education institutions, consulting engineers and leading electrical
engineers contractors around Australia & New Zealand ensure priority service and proactive response by
professionally trained CMS personnel.
The use of the CMS Quick flex modular wiring system will drastically reduce installation time for the
contractor, delivering you cost savings on site.
The 5 Pole modular wiring system is increasing amongst new projects in Australia and New Zealand, and
is being specified more frequently by designers and engineers. The energy efficiencies achieved by this
form of modular wiring delivers exceptional cost savings, and most importantly sustainable design
solution management to the end-user.
CMS is committed to contributing to sustainable design
At CMS, we have long been of the opinion that environmental issues must be factored into the building
design of the future. CMS Electracom is a company committed to Corporate Social Responsibility. How
we implement this is through product stewardship, best practise purchasing to meet Australian
standards, bringing alternative and reduced environmental impact products to our clients.
The Quick Flex system is environmentally friendly, having ROHS and Best Environmental Practice
Certification. To ensure your project adheres to Green Star rating, CMS have direct access to supply
certified PVC-Free cabling system that have been stringently tested by independent laboratories to meet
Green Star compliance.
1 14.1.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Features & Benefits of CMS 5 Pole Solution
♦ Installation time for the contractor is drastically reduced, delivering up to 30% reduction in
labour costs
♦ Reduction in Waste - Zero onsite material waste
♦ Uncomplicated wiring layout, requiring only 4 components for a total solution!
♦ Cost & Energy Efficient
♦ Safe & Easy Maintenance - isolation during maintenance by removing a single light lead from
the bank of ‘T’ pieces.
♦ Simple integration
Why deal with CMS Electracom?
♦ Supplying wiring & power solutions since 1979
♦ Access to industry trained professionals
♦ Ability to supply small to large orders to meet your project schedules
♦ Dedicated CMS designers and engineers to support custom solutions
♦ Local support by CMS Offices in Sydney, Melbourne, Brisbane, Perth, Auckland, London &
Singapore
14.1.14 2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
CMS Quick Flex 5 Pole Installation Examples
How we work?
1) Design
2) Develop
3) Deliver
CMS will take you through the process from concept to completion of
wiring and power requirements.
CMS experienced team of professionals are trained to provide consultation,
estimating & engineering support to all your project needs.
14.1.14 3
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Introducing the CMS 5 Pole Solution
Image Part Number Description
QF1
Starter Socket - Transition between hard
and softwiring Tunnel terminals to A5.2
Socket
QF2
Interconnecting Lead, 5 core, 3x2.5mm²
(A,N,E) & 2x1.5mm² Dali, A5 Socket to
Plug
QF3
Supply Cable, A5.1 Plug to free end, 5
core, 3x2.5mm² (A,N,E) & 2x1.5mm²
Dali.
QFS3 A5.2 Socket to free end, 5 core,
3x2.5mm² (A,N,E) & 2x1.5mm² Dali
QF3a Supply Cable, A5.1 Plug to free end,
5x1.0mm², maximum 2.5metres
For Special Project Pricing, Email Your Plans To
14.1.14 4
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Image Part Number Description
QF3b
Supply Cable, A5.1 Plug to B5.2 Socket.
Mates with QF6 Light Plug. 3x2.5mm²
(A,N,E) & 2x1.5mm² Dali.
QF3c
Supply Cable, A5.1 Plug to B5.2 Socket.
Mates with QF6 Light Plug. 5x1.0mm²,
maximum 2.5metres
QF4 A5 Plug/Socket with tails for direct
connection.
QF5 Interceptor allows splitting of Dali & Power
circuits, i.e. when adding new power circuit.
QF6 Lighting Adaptor B5.1 Plug - Push fit
termination.
Design & Estimating Support for all your Project Needs
14.1.14 5
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Image Part Number Description
B5T ‘T’ Adaptor IN/OUT A5 connector and B5.2
Lighting Socket.
B5.212 B Type Socket - Rewireable.
A5.T ‘T’ Adaptor 1 IN/2OUT A5 connector.
14.1.14 6
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Notes:
- Standard colour for light lead is Black (BK) or White (WT)
- Standard colour for 5 Pin socket is White (WT)
5 POLE PLUG & SOCKET
ORDERING INFORMATION
PART NO. DESCRIPTION
QF75WT Single 10Amp 250v 5 pin Socket - White
QF7A-25BK 2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black
QF7A-100BK 10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black
QF7A-25WT 2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White
QF7A-100WT 10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White
PLEASE CALL US FOR THE MOST UP TO DATE SPECIFICATIONS AND PRICING
QF75 Shown
5 Pin plug shown
The CMS 5 pole plug base is the latest socket
designed by CMS Electracom suitable for Dali, DSI
and BMS lighting control networks. The system is
used as an alternative to our Quick Flex 5 pole ‘plug
and play’ system.
The CMS 5 Pole plug base will also accept a
standard Australian 3 pin plug so you can future
proof your next installation if a lighting control
system is desired at a later stage.
Nearly every new office today incorporates some
level of intelligent light level sensors, movement
sensors, zoned lighting scene setting and time
clocks.
In areas where you have exposed ceilings or long
distance between light fittings/devices the CMS 5
pole plug base system will provide a convenient
and cost effective solution for your next installation.
14.1.14 7
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
5 Pole Dali 5pin Plug Base Application
Part No: QF75
Step 1:
Strip cable to recommended length.
Step 2:
Terminate cable wiring into terminal blocks,
ensure correct polarity, use break-out areas in
socket body to allow cable entry and exit.
Step 3:
Mount unit using screw mounting holes onto
industry standard conduit mounting block or
use mounting plate provided.
Rating - 10A 250V a.c
Conductor range - 1.0mm2 to 2.5mm2 solid/
stranded to AS/NZS5000
This product must be installed by a qualified
electrician.
Disconnect power supply before connecting or
disconnecting this product.
Active contacts rated low voltage max. 10Amps
Step 1:
Step 2:
Step 3:
14.1.14 8
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
27.11.14 9
CMS QUICK FLEX QF75-02
Notes:
- **Denotes colour is White (WT) or Black (BK) (for light lead only)
- For associated parts refer CMS catalogue Dali products section pages 1- 8
ORDERING INFORMATION
PART NO. DESCRIPTION
QF75-02BK Dual socket 10amp 250v 5pin socket - Black only
QF7A-25** Light lead free end to CMS 5pin plug - 2500mm
QF7A-100** Light lead free end to CMS 5pin plug - 10,000mm
The Quick Flex QF75-02 provides a simplified solution for creating a modular DALI, DSI, CBus or BMS
backbone allowing for direct retrofit of a 3-pin install, whilst providing the foundation for future intelligent
lighting fit outs.
Utilising QF7A Light lead/5-pin plugs together with QF2 interconnecting leads, the Quick Flex QF72-02
socket makes quick and easy work of daisy-chaining multiple luminaires into a service outlet. Inclusion
of both hardwired and continuous-line mounting provide flexible installation options catering to any
application.
The 5-pin outlet also directly accepts the retrofit of AS/NZS 3112 standard 3-pin plugs for existing
installations with the option to upgrade to an intelligent lighting control system in the future.
QF75-02 5-pin Socket QF7A-25 5-pin plug shown in black
With labour and project costs in mind, the Quick
Flex QF75-02, used together with CMS adaptors
and installation couplers, delivers a time-saving,
cost-effective and flexible solution for new or
planned intelligent lighting applications.
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
17.11.14 10
QF75-02 Installation Manual
2. Plug the appropriate QF interconnecting leads or T-piece connectors into the QF7502 as in the
example shown. (see CMS catalogue for more information) The QF7502 utilises the 5 pin QF7A
CMS plug and will also accept Australian standard 3 pin plugs.
3. The two extra pins (DA L2 and DA L3) can be used as alternative 250V 10A connections or for
low voltage Dali signals. It must be noted that the total output load rating of the product is 10A
single phase and this must not be exceeded in any way or by any configuration of inputs.
This product must be installed by a qualified electrician.
Disconnect power supply before connecting or disconnecting this product.
Active contacts rated low voltage max. 10Amps Product tested rating 20A 250V/50Hz A.C
1. Mount the QF7502 unit using the mounting holes provided using screws suitable to your
application. Alternatively, hang the QF7502 to wire by using the clip feature of the product.