d Sars 0020631
1
Introduction The FX-16EYT-TB is a remote termination block for use with all FX2C base units. This particular model has 16 transistor outputs and can be mounted up to 5 meters (16 feet, 4.85 inches) from the base unit depending on what connection cable is used. Specification PARAMETER SPECIFICATION External dimensions 150 × 55 × 45 mm 5.91 × 2.17 × 1.77 inches Weight 0.3 kg 0.66 lbs I/O specification 16 Transistor outputs Mounting facilities 35 mm Din rail (to DIN standard 46277) Standard connection cables FX-16E-150/ 300/ 500CAB (1.5/ 3.0/ 5.0 meter long cables respectively) Diagrammatic Layout of the FX-16EYT-TB Terminal Layout Operating Features TRANSISTOR OUTPUT SPECIFICATION CONNECTOR SPECIFICATION Manuf Rated current 0.5A/point (0.8/4 points) I/O socket on terminal block FRC5-C20S53T-OL (DDK) Load voltage 5 to 30V DC FRC2-C20S13-OL Maximum load Inductive 12W at 24V DC HIF3BA-20PA- 2.54R (Hirose Electric) Lamp 1.5W at 24V DC I/O plug required on connecting cable HIF38A-20D-2.54R Response time 0.2 ms with a current of 0.2A or higher FRC5-AO20-3TOS (DDK) FRC2-AO20-3OS MITSUBISHI FX - 16EYT -TB 45 (1.77) 150 (5.91) 55 (2.17) UNITS: mm (inches) NOTE: Terminal card is removed for clarity OUTPUT CONNECTIONS FX - 16EYT - TB 24+ 24- 1 3 0 com1 com2 2 com1 5 7 4 6 com2 1 3 0 com3 com4 2 com3 5 7 4 6 com4 TM DATE: JULY 1993 PAGE: 1 OF 1 SPECIFICATIONS OF THE FX-16EYT-TB FX-HOT001A FX2
description
DSAR
Transcript of d Sars 0020631
-
Introduction
The FX-16EYT-TB is a remote termination block for use with all FX2C base units. This particular model has 16transistor outputs and can be mounted up to 5 meters (16 feet, 4.85 inches) from the base unit depending onwhat connection cable is used.
SpecificationPARAMETER SPECIFICATION
External dimensions 150 55 45 mm 5.91 2.17 1.77 inchesWeight 0.3 kg 0.66 lbs
I/O specification 16 Transistor outputsMounting facilities 35 mm Din rail (to DIN standard 46277)
Standard connection cables FX-16E-150/ 300/ 500CAB (1.5/ 3.0/ 5.0 meter long cablesrespectively)
Diagrammatic Layout of the FX-16EYT-TB
Terminal Layout
Operating FeaturesTRANSISTOR OUTPUT SPECIFICATION CONNECTOR SPECIFICATION Manuf
Rated current 0.5A/point (0.8/4 points)I/O socket onterminal block
FRC5-C20S53T-OL (DDK)Load voltage 5 to 30V DC FRC2-C20S13-OL
Maximum loadInductive 12W at 24V DC HIF3BA-20PA-2.54R
(HiroseElectric)
Lamp 1.5W at 24V DC I/O plug required onconnecting
cable
HIF38A-20D-2.54R
Response time 0.2 ms with a current of0.2A or higherFRC5-AO20-3TOS (DDK)FRC2-AO20-3OS
MITSUBISHI FX - 16EYT -TB
45 (1.77) 150 (5.91)
55 (2
.17)
UNITS: mm (inches) NOTE: Terminal card is removed for clarity
OUTPUT CONNECTIONS FX - 16EYT - TB
24+24- 1 3
0 com1 com22com1 5 7
4 6com2 1 3
0 com3 com42com3 5 7
4 6com4
TM
DATE: JULY 1993PAGE: 1 OF 1
SPECIFICATIONS OF THEFX-16EYT-TB
FX-HOT001A
FX2
