CV

2
CIRRICULUM VITAE Steven Andrew Watt 19 Boyne Street, Whitehills, Banff, Aberdeenshire, AB45 2ND [email protected] DOB.25-09-67 Tel: 01261 861423 Mobile: 07854211333 Experience Company - KCA Deutag (BBLT Angola) Period - December 2012 to date. Position - 5th Generation offshore Systems Engineer Duties - Preventative and reactive maintenance of all systems, electrical and instrument equipment within the drilling scope. Calibration, testing and installation of instrumentation. I am familiar with all systems pertinent to that scope, such as Siemens S7 & Allen Bradley PLCs, Vacon VFDs, cLink cyber SCADA systems, fibre optic, CCTV and TCP/IP systems. I am also familiar with HVAC and Drilgas systems. Maintain critical spares and sourcing/purchase of parts for projects. The main drill floor equipment I have experience with on this platform are TD (National PS2- 750A), Drawworks (National SSGD-4600-63), and Mud pumps (National 14-P-220). Also a CAT 3516B emergency generator. As well as fulfilling the systems engineers duties I also stand in for the Senior electrician as and when required. Company - KCA Deutag (Britannia) Period - April 2006 to December 2012. Position - Offshore Senior Electrician (Cat B CEP) Duties - Preventative and reactive maintenance of all electrical and instrument equipment within the drilling scope. I am familiar with all systems pertinent to that scope, such as Seimens S5, Mitsubishi PLCs, Bauteil SCRs, GEC Alsthom Gemstart 3, ICIS intelligent motor control, Varco and Maritime Hydraulics equipment. Liaise with 3 rd party vendors and ensure installation safety procedures are followed. Perform supervisor stand in duties when required. The main drill floor equipment I have experience with on this platform is DDM (MH-650-DC- 2M), Drawworks (National 1625E), Mud pumps (National 14-P-200). Company - Aker Kvaerner MH UK Ltd Period - August 2005 to April 2006. Position - Service Engineer (Multi-disciplined). Duties - To maintain and repair all drilling package equipment supplied by Maritime Hydraulics. This required mechanical and electrical fault finding and repair on equipment such as Hydraulic and electrical Derrick Drilling Machines, Pipe handling equipment, Access baskets etc.

Transcript of CV

Page 1: CV

CIRRICULUM VITAE

Steven Andrew Watt 19 Boyne Street, Whitehills, Banff, Aberdeenshire, AB45 2ND

[email protected]

DOB.25-09-67

Tel: 01261 861423 Mobile: 07854211333

Experience

Company - KCA Deutag (BBLT Angola)

Period - December 2012 to date.

Position - 5th Generation offshore Systems Engineer

Duties - Preventative and reactive maintenance of all systems, electrical and instrument equipment within

the drilling scope. Calibration, testing and installation of instrumentation.

I am familiar with all systems pertinent to that scope, such as Siemens S7 & Allen Bradley PLCs,

Vacon VFDs, cLink cyber SCADA systems, fibre optic, CCTV and TCP/IP systems.

I am also familiar with HVAC and Drilgas systems.

Maintain critical spares and sourcing/purchase of parts for projects.

The main drill floor equipment I have experience with on this platform are TD (National PS2-

750A), Drawworks (National SSGD-4600-63), and Mud pumps (National 14-P-220). Also a CAT

3516B emergency generator.

As well as fulfilling the systems engineers duties I also stand in for the Senior electrician as and

when required.

Company - KCA Deutag (Britannia)

Period - April 2006 to December 2012.

Position - Offshore Senior Electrician (Cat B CEP)

Duties - Preventative and reactive maintenance of all electrical and instrument equipment within the

drilling scope. I am familiar with all systems pertinent to that scope, such as Seimens S5,

Mitsubishi PLCs, Bauteil SCRs, GEC Alsthom Gemstart 3, ICIS intelligent motor control, Varco

and Maritime Hydraulics equipment. Liaise with 3rd

party vendors and ensure installation safety

procedures are followed. Perform supervisor stand in duties when required.

The main drill floor equipment I have experience with on this platform is DDM (MH-650-DC-

2M), Drawworks (National 1625E), Mud pumps (National 14-P-200).

Company - Aker Kvaerner MH UK Ltd

Period - August 2005 to April 2006.

Position - Service Engineer (Multi-disciplined).

Duties - To maintain and repair all drilling package equipment supplied by Maritime Hydraulics. This

required mechanical and electrical fault finding and repair on equipment such as Hydraulic and

electrical Derrick Drilling Machines, Pipe handling equipment, Access baskets etc.

Page 2: CV

CIRRICULUM VITAE

Company - Pelikan Ltd

Period - October 1997 to August 2005.

Position - Electrician then Engineering Team Leader.

Duties - Electrical and instrument instalation, maintenance, calibration and repair of production machinery

and ancillary plant such as Plastic injection moulding equipment, Robotic equipment, Coating and

slitting machines, ultra sonic welders etc. Supervise the installation and commissioning of new

equipment. Supervise maintenance team and ensure effective maintenance routines are developed

and instigated and all company safety procedures are followed.

Company - Pelikan Ltd

Period - April 1985 to October 1997.

Position - Quality Assurance Inspector

Duties - Ensure all incoming raw materials meet with technical specification. Liaise with vendors

concerning quality issues. Develop and maintain test equipment calibration procedures to meet

with BS5750 and ISO 9001 requirements. Investigate and rectify quality issues with finished

products.

Formal qualifications

HNC Mechatronics Aug 2000

SVQ level 3 Engineering maintenance Oct 2002

Certificated Courses

Siemens S7 Service Levels 1, 2 & 3 2014 - 2015

TCP/IP networking September 2013

HV/LV switching (C & G) June 2012

CompEx certificate of core competence in the preparation,

installation and inspection of equipment in hazardous areas,

(Ex d, n, e, p and i systems). July 2011

17th Edition IEE Regulations (C & G)

Ex 1st line maintenance and motor bearing replacement

Seimens S5 System 1 October 2006

Seimens S5 system 2 September 2007

Mitsubishi PLC systems introduction and advanced. November 2005

Sparrows Rexroth hydraulics October 2005

MIST April 2012

Safe working at heights October 2005

Safety observation systems September 2005

Scaffold tower erection March 2005

Abrasive wheel regulations June 1998

BOSIET (OPITO) including EBS January 2013