Cv. guarino english .
-
Upload
raffaele-guarino -
Category
Engineering
-
view
64 -
download
3
Transcript of Cv. guarino english .
Curriculum vitae Guarino raffaele
Place and date of birth: Taranto 02/02/1957
School : Secondary High School
Mobile phone : +39 3404871259
@ mail : [email protected]
foreign languages : English/French ( Conversational )
Microsoft office : word / excel
Availability': Freelance
QUALIFICATIONS : � Welding Inspector - Lev. II - 3.1 CSWIP
� Level II - UNI-EN-ISO 473-UT-9712-RT-MT-PT-VT
� Level II - SNT-TC-1A - UT-RT-MT-PT-VT
Experiences
– Welding , welders qualifications ,Piping,tanks,Boilers, wessels furnaces heat exchangers
structural steel Static Equipment valve column Crane , Skid Mounted Equipment , Pipe mill
( ERW / SEAMLESS /SAW )
– Over thirty-five years of experience, construction and assembly of industrial plants (chemical,
petrochemical, platforms, pipelines, power plant,refinery )
– Over Thirty –five years experience in NDT INSPECTION AND OPERATIVE UT-RT- MT-PT- VT of
welds and forgings,
– Third party , Audit , Pre Commissioning,expediting, check Material certification and final dossier
( Drawings, MDR-ITP-QCP-)
– Partecipate to site weekly & on call meetings.
– Implement the relevant Contractor’s and suppliers ITP’s and procedures
– Monitor and control the implementation on site of the approved drawings, approved QA/QC
plan, Surveillance plans, Inspection and test plans
– Ensure that the works are closely inspected by the Contractor’s QC inspection team (e.g.VT / DC
/ RT, UT, MPI, PMI, etc.)
– Witness inspection points upon quality control
– Supervise the Project Surveillance and QC activities performed on site
– Ensure that the works are closely inspected by the contractor’s QC inspection team
– Monitor the work deficiencies (repair rate in particular), and ensure the implementation of the
necessary corrective actions
– Propose issuance of ICR (Investigation & Correction request) for any issue not
documented by Contractor.
– Attend and participate in daily meetings; Attend, when requested, the various fabrication
– On request participate to fabrication, HSE or QAQC specific audits or visits
–Inspection & activity reports at least weekly report required.
–Assistance to companies which perform the installation
–Site managers to assist in the project management phase
– Checks and completions of the independent technical documentation "as built
Jan. - Dec. 1981
Company: Tecnicontrol Taranto Location: Taranto Position: QC / Inspector Projects: Refinery ENI Duties: �Check welding stages, parameters (WPS) �Technician N.D.T. Ultrasound technique �Supervisor during the phases of construction and installation piping and steel structures
Jan. 82 – Dec. 2000
Company: Belleli Location: Taranto Position: QC / Inspector welding and NDT. Projects: Prefabrication Oil Platforms on behalf of Shell, Amoco, Saipem, Aker, Amerada: Storebaelt-East Bridge Superstructure, Total, Duties: �Inspector welding tasks �Inspect and evaluate welds according to specified inspection procedures, standards, codes, and drawings. �Inspector during the phases of construction and assembly �Inspector coatings and painting
�Check and assistance to subcontractors �Check materials �Monitoring and supervision during the phases of C.N.D. �Check and verification of certificates of materials traceability of materials and equipment visual and dimensional �Supervisor and assistance to hydraulic and pneumatic tests � Non-destructive testing (visual, magnetic and ultrasound) supervision installation, NCR occurs, revisions of current designs and final documentation. �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built Feb.- Jun .2000
Company: Snamporgetti Location: Italy Qualification: Welding Supervisor / C.N.D. Project: Gas pipeline Montesano (PZ) - Brindisi Km. 250 (40 ") Duties : �Check drawings, procedures, and design specifications, � Inspect and evaluate welds according to specified inspection procedures, standards, codes, and drawings. �Check Welding Equipment Manuals (electrode) and Automatic (step), �Check coupling pipes, traceability 'of materials, consumables, (SNAM standards applied, (PQR / WPS) �Check nondestructively with ultrasound welding of the crossings (rivers railway rails, bridges, roads) � Reading and judgment of radiographic film, Final Dossier � Record welding inspection results that were witnessed and prepare associated report. Aug. - Sep.2000 Company: Belleli research . Location: Taranto Qualification: Supervisor- N.D.T. Project: Ship perforations Saipem 10000 Duties: �Check with magnetic and ultrasonic method piping, components piles Drilling, � final Dossier. Mar. - Dec.2001
Company: RINA Industry Location: Metaponto (MT) Position: QC / Inspector Project: Oil pipeline Agip Monte Alpi (Pz) - Eni's Taranto refinery Km. 152 (24 ") Duties: � Review the welding procedure specification and inspection requirements prior to welding � Check, welding Manuals (electrode) and Automatic Equipment (step) � Check, pipe coupling, traceability 'of materials, consumables, in compliance with the applicable standards, � Check, of the welding parameters, non-destructive � Check with ultrasound welding of the crossings (railway rails rivers, bridges, roads) � Radiographic film Judgment, Final dossier � Prior to and during welding, verify that the specified base metal(s) and welding filler metal(s) are used. � Verify that the specified joint preparation and fit-up used prior to welding. � Monitoring and inspect all work performed by tackers and welders and/or welding operators. � Record welding inspection results that were witnessed and prepare associated report.
Jan. - May.2002 Company: Intermare Sarda / AGIP Location: Tortolì (SS) - Italy Position: QC / Inspector Project: PlatForm Jackets Offshore Aramco Duties: � Check specific of control and standards' API / ASME � Check with UT method, welding and thickness � UT Cross check welding spot indicated by the customer May.2002 - Dec.2003. Company: ILVA Location: Taranto Position: QC / Inspector Project: Construction of various diameter pipes ERW / SAW Tasks: � Check test and documentation � Supervisor materials and control during the coating steps and coating of pipes of various diameters � Final dossier Jan.2003 -Oct. 2008 Company: Marcegaglia Location: Taranto Position: QA / QC Supervisor Project: Construction Boilers heat exchanger,column,reactor, Skid Mounted Equipment, etc. etc. Duties: � Inspector Welding / NDT Technician � Check and NCR management. � Monitoring subcontractors during the construction phase and installation � Check materials � Final Check (pneumatic / hydraulic) �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Final dossier Oct. 2008 - Feb. 2009 Company: Fomas Location: Osnago (Lecco) Qualification: Technical C.N.D. (Ultrasonic) Project: Various projects (Nuclear) duties: � UT controls on forged � testing and final checks of forged structures � Drafting final documentation Feb. –Jul.2009
Company: QUALITEST (BA) Location: Ferrandina (PZ) Position: QC / Welding Inspector / NDT Technician Project: Component assembly Furnace Alabama "Techint" duties: � Welding Inspector � Inspector / Technician C.N.D. UT method. � Responsible Quality Control Plan in the field � Verification of project documentation � final documentation. Jul. -Dec.2009 Company: ILVA Location: Taranto Position: QA / QC Inspector Project: Construction and installation piping system T12 ASU Air Liquide Duties: � Project Document control, ITP, qualification procedures, � monitoring of activities in the pipeline � Supervision dimensional NDT subcontractors, magnetic particle, ultrasonic, visual � Monitoring the welding parameters, (WPS) � Weekly Meeting of safety and production progress, documentation final Jan. –Nov.2010 Company: Someco Location: Ferrandina (PZ) Position: QC / Inspector Project: Central Gas Tanks Construction of Crotone duties: � control, documentation,, project, ITP, procedures, � monitoring, of, activities, in, construction, and workshop � Controls, dimensional, magnetic particle, ultrasonic, visual � Check, parameters, welding, equipment of welding �Meeting of safety and production, final documentation Nov. 2010 –Jul.2011 Company: AGIP KCO (KAZ ) Isker-Skema ( I ) Location: Atyrau Kazahstan Position: QC / Supervisor Project: Modules for Offshore Platform Duties: � Project Document control, ITP, procedures and qualifications, � monitoring of the activities in the workshop, � Dimensional inspection, magnetic particle, ultrasonic, visual � Check the welding parameters and welding equipment � Skid Mounted Equipment
�Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Meeting weekly on safety and production progress, final documentation. Apr.- Jul.2011 Company: Qualitest Location: Ferrandina (PZ) Position: QA / QC Inspector Welding / NDT Project: Pipiline, Frida / Ferrandina-Power 24 " 1 ° tract Duties: � verification, documentation,, project, ITP, QCP procedures, etc. etc. � monitoring, of, activities, in, construction, and workshop � Controls, dimensional, magnetic particle, ultrasonic, visual � Check, parameters,welding, systems, welding � Meeting weekly on safety and production progress, final documentation Jul.-Nov. 2011 Company: Saipem Location: Menzel - Algeria Position: QA / QC Supervisor Project: Menzel Ledjmet East Project - Algeria Duties: � Project Document control, ITP, qualification procedures, traceability 'of materials � monitoring of activities on site, assembly, welding, painting. � Supervision and support subcontractors photo �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Report of the activities', Meeting weekly of production progress, and final documentation � Management NCR and Read / judgment radiographic films Jan. – Jul. 2012 Company: BENTINI (FAENZA) Location: ARZEW - ALGERIA Position: QA / QC Supervisor Welding / NDT Project: SAIPEM / SONATRACH LNG-3Z PROJECT STORAGE TANKS duties: � control, documentation,, project, ITP, procedures, qualifications, drawings, � Traceability ', of, materials, � monitoring, of, activities, in, construction, and, workshop, � Supervision, assembly, welding, painting. � Supervision and assistance , subcontractors � daily Report, of activity ' � Skid Mounted Equipment �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Meeting, of production, and final documentation, � Management NCR and Read / judgment radiographic films
Jul.- Sep. 2012 Company: SAIPEM Location: Cortemaggiore (PC) SAIPEM Laboratory welding and control N.D.T. Position: QA / QC Inspector Welding Project: KCC-WILLIAMS GULF MEXICO duties: � Control Of Project documentation (drawings, pPQR, Pwps, materials, qualifications and welders, welding machines, consumables � monitoring parameters during the welding phase of the Test coupon (amps / volts, speed, etc.etc.) � final visual control . � Monitoring PWHT � Monitoring Mechanical tests according to API standards - DNV � final documentation. � Review the welding procedure specification and inspection requirements prior to welding. � Prior to and during welding, verify that the specified base metal(s) and welding filler metal(s) are used. � Verify that the specified joint preparation and fit-up used prior to welding. � Monitoring and inspect all work performed by tackers and welders and/or welding operators. � Inspect and evaluate welds according to specified inspection procedures, standards, codes. � Record welding inspection results that were witnessed and prepare associated report. Oct. - Dec. 2012 Societa ': GE - INTERTEK LOCATION : Rho (MI) Forge vienna Qualification: Inspector C.N.D. PROJECT: Forged blocks "CHINA PETROLEUM MATERIALS CORPORATION" DUTIES: � Inspection and verification CND � Check documentation of project � Skid Mounted Equipment � Final Dossier Dec.2012 - May 2013 SOCIETY ': SAIPEM - INTERTEK Location: Rijeka (HR) - Cortemaggiore (PC) Laboratory of welding and N.D.T. controls Position: QA / QC Inspector Project: CABIUNAS "24 PETROBRAS duties: �Control Of Project documentation (drawings, pPQR, Pwps, materials, qualifications and welders, welding machines, consumables � Monitoring parameters, during the welding phase of the Test coupon (amp / volt, speed, etc.etc.) � final visual control. � Monitoring Mechanical tests (Traction-Resilience) according to API standards - DNV � final Dossier � Review the welding procedure specification and inspection requirements prior to welding. � Prior to and during welding, verify that the specified base metal(s) and welding filler metal(s) are used. � Verify that the specified joint preparation and fit-up used prior to welding. � Monitoring and inspect all work performed by tackers and welders and/or welding operators. � Inspect and evaluate welds according to specified inspection procedures, standards, codes � Record welding inspection results that were witnessed and prepare associated report.
May-Dec. 2013 SOCIETY ': ENI- INTERTEK Location ': Taranto Modomec spa / Tecnomec engineering Position: QA / QC INSPECTOR Project: ZUBAIR OIL FIELD PROJECT (IRAQ) Duties: �Final documentation control, MDR, FAT, QCP,ITP. �Visual test of Welding, painting and insulation �Skid Mounted Equipment �Final tests and final dossier. Dec.2013 – Feb. 2014 SOCIETY ': Ansaldo Energia (GE) - RINA SERVICES (GE) Location ': Lagreb (ALGERIA) Position: QC / Inspector Project: Open-cycle thermal power station (3x140 MW) of Labreg duties: � Documentation Control Project, � Monitoring of activities on site, � Supervision and documentation subcontractors photo � Skid Mounted Equipment � Report of the activities', Meeting weekly of production progress, and final documentation � Management NCR and Read / judgment radiographic films Feb, - Jun 2014 SOCIETY ': ENGINEERING ( RA) - Entekhab INDUSTRYco. (IRAN) Location: Castelseprio (VA) Position: QC /Mechanical Inspector 3° Party Project: Disassembly Plant "SADEPAN CHEMISTRY" Duties: � Control, documentation,, project, ITP, procedures, qualifications, drawings, � Traceability ', of, materials, � Monitoring, activities, of construction � Daily Report of, activity' � Skid Mounted Equipment � Meeting progress and Final documentation � Inspection material storage. �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Inspection, pumps, motors, columns, Piping .Fan, heat exchangers, tanks etc.etc. Jun . - Dec. 2014 SOCIETY ': SAIPEM CONGO Location: Pointe Noire (REPUBLIC OF CONGO) Position: QC / Inspector welding and NDT
Project: Moho north.AKER Duties: � Supervision nondestructive testing � Welding Supervision � check with UT method , welding spots Jun . - Dec. 2014 SOCIETY ': ENI CONGO Location: M' boundi '(REPUBLIC OF CONGO) Position: QC / Inspector welding and NDT Project: Congo Marine XII block Litchendjili Gas Development Duties: � Project Document control, ITP, qualification procedures, traceability 'of materials � Monitoring of activities on site, assembly, welding, painting, testing. � Supervision, subcontractors � Skid Mounted Equipment � Photo Report of the activities', � Meeting of production in progress, final documentation � Management NCR and Read / judgment radiographic films Dec.2014 - Oct .2015 Company: Bureau Veritas Location: San Giorgio di Nogaro (UD) Officine CIMOLAI Position: QC / Welding Inspector Project: ZADCO "Zakum UPPER MODULE" (ZADCO-PETROFAC) Duties: � Project Document control, ITP, qualification procedures, and traceability 'of materials, etc.etc. � Monitoring of the activities in the workshop, � Verifying cutting and sanding slabs, �Site managers to assist in the project management phase �Checks and completions of the independent technical documentation "as built � Sepervisor Dimensional, visual test ,magnetic particle test , ultrasonic test , � Pre-heating, and welding parameters, � Control of welding equipment, and certification of calibration � Meeting of production , and final documentation. Company: Bureau Veritas Location: Polcenigo (PN) Officine CIMOLAI Position: QC / Inspector 3° Party Project: Tower "A" (building construction metal structure “skyscraper” New York U.S.A.) Duties: � Project Document control, ITP, qualification procedures, traceability 'of materials � Monitoring of the activities in the workshop � Verifying cutting slabs � Supervisor Dimensional check , magnetic particle check , ultrasonic check , visual check � Pre-heating, and welding parameters, WPS � Control welding equipment
� Photo Report activities', � Meeting of production in progress, final documentation. Oct.2015 - Feb.2016 Company: Bureau Veritas Location: Livorno refinery ENI Position: QC / Inspector of Plant Project: Inspection station systems HD3-SULPHUR-MEA2 UNI-1 - at Eni S.p.A. Duties: � Supervision companies assembly subcontracting and CND. � Skid Mounted Equipment � Visual check ,inspections of components (reactors, boilers, pumps, heat exchangers, furnaces, pipelines. � Testing occurs, capable of oxidation, pipe lines replacements, cross check with UT, � Surveys monitoring thickness measurement UT, � Judgment radiographic films, on welds and shell
Feb -May 2016 Company: Aces-GQS Villa d’adda (BG)- Fluor (UK)
Location: Factory A.C. Ansaldo Boilers spa. Gioia del colle (BA)
Position: QC/ Inspector 3° Party
Project: Tengiz, Kazakhstan-Future Growth Project Wellhead Pressure.
Duties:
�Check Documentation of Project (drawings, pPQR, Pwps, materials, qualifications and welders, welding
machines, consumables
� Monitoring parameters during the welding phase of testing heels (amps / volts, speed, etc.etc.)
� Visual check
� Monitoring mechanical tests (Traction-Resilience) according to ASME IX
� Final Dossier .
�Review the welding procedure specification and inspection requirements prior to welding.
�Prior to and during welding, verify that the specified base metal(s) and welding filler metal(s) are used.
�Verify that the specified joint preparation and fit-up used prior to welding.
�Monitoring and inspect all work performed by tackers and welders and/or welding operators.
�Inspect and evaluate welds according to specified inspection procedures, standards, codes, and drawings.
�Record welding inspection results that were witnessed and prepare associated report.