CV-CalvinTan

4
Curriculum Vitae Name: Calvin Tan Kwang Yuen Age: 28 Nationality: Malaysian Date of Birth: 11 Aug 1987 Tel: +65 8426 3214 Email: [email protected] Address: Block 293, Bishan Street 22, #10-85, Singapore 570293. Work Experience: Jan 2012- Dec 2014 Philips Lumileds Lighting Company, Penang, Malaysia (Currently known as Lumileds Malaysia) Lead Engineer (Test Development team) Philips Lumileds is the pioneer in manufacturing solid state lighting such as the LED backlight, LED flash in camera phone, LED illuminations and automotives lighting. Job scope: Experienced in development of new test platform for new product and transferring to production. Responsible to coordinate with process & maintenance engineer to ensure smooth transfer of new test platform Drive process improvement to decrease test time and increase tester PPH; Validate test reliability to improve test yield by working with QA & Product Engineer. Worked closely with machine vendors to standardize SOP for calibration and maintenance procedure on similar tester worldwide. Knowledgeable in process documentation and is responsible to train engineers & technician on new test platform during new product transfer. Shows good leadership quality and is responsible for a small team of 5 people compromising of engineers and technician. Ensure daily routine is completed smoothly and drive each individual in the team towards a common department goal. Experienced in subcontractor management, responsible on test platform development in subcontractor site and ensuring SOP meets Phillip’s requirements. Main projects/Achievements: 1. Project Lead in new supplier qualification. Responsible to develop and qualify Flip Chip LED technology. Tasked to consult and drive Flip Chip LED technology implementation at different supplier sites to avoid single source 2. Develop and qualify new flash module tester to check intensity and uniformity of new flash technology. Responsible to transfer and qualify new process at subcontractor site. 3. NPI project mainly responsible for Test Process Qualification at subcontractor site in Thailand. Based on Thailand for two weeks to qualify, tool up and train subcontractor personal to meet Phillips requirements. 4. Implemented new test methodology to effectively screen out defective LEDs which escaped electrical screening for automotive product. 5. Project lead in developing non-destructive calibration method on new tester platform in plant cost saving project and reduce lead time for calibration to allow increase in tester efficiency.

Transcript of CV-CalvinTan

Page 1: CV-CalvinTan

Curriculum Vitae Name: Calvin Tan Kwang Yuen Age: 28 Nationality: Malaysian Date of Birth: 11 Aug 1987 Tel: +65 8426 3214 Email: [email protected] Address: Block 293, Bishan Street 22, #10-85, Singapore 570293. Work Experience: Jan 2012- Dec 2014 Philips Lumileds Lighting Company, Penang, Malaysia (Currently known as Lumileds Malaysia) Lead Engineer (Test Development team) Philips Lumileds is the pioneer in manufacturing solid state lighting such as the LED backlight, LED flash in camera phone, LED illuminations and automotives lighting. Job scope:

Experienced in development of new test platform for new product and transferring to production. Responsible to coordinate with process & maintenance engineer to ensure smooth transfer of new test platform

Drive process improvement to decrease test time and increase tester PPH; Validate test reliability to improve test yield by working with QA & Product Engineer.

Worked closely with machine vendors to standardize SOP for calibration and maintenance procedure on similar tester worldwide.

Knowledgeable in process documentation and is responsible to train engineers & technician on new test platform during new product transfer.

Shows good leadership quality and is responsible for a small team of 5 people compromising of engineers and technician. Ensure daily routine is completed smoothly and drive each individual in the team towards a common department goal.

Experienced in subcontractor management, responsible on test platform development in subcontractor site and ensuring SOP meets Phillip’s requirements.

Main projects/Achievements: 1. Project Lead in new supplier qualification. Responsible to develop and qualify Flip Chip LED

technology. Tasked to consult and drive Flip Chip LED technology implementation at different supplier sites to avoid single source

2. Develop and qualify new flash module tester to check intensity and uniformity of new flash technology. Responsible to transfer and qualify new process at subcontractor site.

3. NPI project mainly responsible for Test Process Qualification at subcontractor site in Thailand. Based on Thailand for two weeks to qualify, tool up and train subcontractor personal to meet Phillips requirements.

4. Implemented new test methodology to effectively screen out defective LEDs which escaped electrical screening for automotive product.

5. Project lead in developing non-destructive calibration method on new tester platform in plant cost saving project and reduce lead time for calibration to allow increase in tester efficiency.

Page 2: CV-CalvinTan

Aug 2011 - Jan 2012 Mini-Circuits Technologies, Penang, Malaysia NPI/Development Engineer Mini-Circuits Technologies is a global leader in RF, IF and microwave signal processing products widely used in military applications, cellular wireless, RFID, medical equipment, test equipment. Job scope:

Support R&D activities in engineering product build and provide technical solution for development requirement.

Responsible in process development and qualification for new product launch. Tasked to ensure process robustness and responsible to oversee transfer to manufacturing.

Responsible in creating compliance document for every new product and process changes. Tasked to train process and maintenance team on new process to ensure smooth operation during production.

Subcontractor management and auditor, maintaining compliance document between company and subcontractor.

Cross functional work with R&D team and FA team to resolve customer RTA and provide process improvement and rectification information to QA team.

Main projects/Achievements:

1. Build thermal diode from new wafers for thermal characteristic study. 2. Qualified and released ceramic-sealed amplifier module to meet product release date. 3. Conduct 8D investigation on substrate solder issue after SMT process.

Other Experience: Jan 2015 - Oct 2015 Gap Year in New Zealand and Australia Experience:

Traveling into unknown territory and leave my comfort zone to expand my horizons. Experience a different culture and working environment, worked in wet fish processing factory,

blueberry farm, apple and kiwi orchard. Expand the view on different cultural lifestyle and meet people from different walks of life.

Ability obtained:

Adaptability: Able to adapt to unexpected situation during my travels and overcome different obstacle during the 9 months.

Budget planning: Work around a tight budget and doing odd jobs to fund my travel. Communication skill: Improves effectiveness of communication skill with people from different

country. Core Strength:

Self-driven engineer with good project management skill and organization skill to allow good track of project timeline achievement.

Ability to work independently without supervision and is comfortable in working on new projects. Experience in utilizing various resources either online or through internal communication to obtain technical knowledge required for a specific project.

Good leadership quality and is experience in people management.

Page 3: CV-CalvinTan

Personal Skills: Project Planning &

Execution Research & Development 8D & FMEA

People Management Cost Reduction Customer/Supplier Relations Design of Experiment

Computer Skill: Advanced:

Minitab Microsoft Office (Word, Excel, Power Point, etc)

Basic:

Pspice SolidWorks AutoCAD C++

Language: Language Spoken Written Mandarin 9 9 English 8 8 Bahasa Melayu 8 8 Leadership and Other Organization Experience: 2013-2014 Team Leader (Test Development Team)

•Tasked to divide Roles & responsibilities among the group to achieve department goal •Emphasis on people and time management skills to structurally organize given task and project to ensure all goals are met in a timely manner

2009: Vice President (Chinese Debate Club.) Leading 70 committees and organized university open debate competition.

Education: 2007-2011: Bachelor Degree in Electrical Engineering with second class lower.

University Tun Hussein Onn (Malaysia)

Page 4: CV-CalvinTan

Hobbies: Travelling: I enjoy travelling, stepping into unknown territory, meeting people and experience

different culture. Reading

Expected Salary: SGD 3200

Notice Period: Immediate

Referees: Name: Chin Yeow, Lee Company: Lumileds Malaysia Position: Chief Test Engineer Contact: +6012 4257821 Email: [email protected] Relationship: Former Supervisor Name: Ming Chong, Ong Company: Lumileds Malaysia Position: Senior Test Engineer Contact: +6016 4456671 Email: [email protected] Relationship: Former Supervisor Name: Chung Ming, Lim Company: Lumileds Malaysia Position: Director Contact: +6012 5759550 Email: [email protected] Relationship: Former Director