CUT RESISTANT HAND PROTECTION

CUT RESISTANT HAND PROTECTION

Hi-Viz SafetyHigh visibility TPR impact moulds for added safety

Abrasion ResistantHPPE shell & Nitrile coating provide optimum protection from abrasion

Cut ResistantHigh Performance Polyethylene fiber for excellent cut resistance

Impact ResistantTPR (Thermoplastic rubber) back-hand, thumb and finger moulds

Oil ResistantNitrile coating offers excellent resistance to oils and grease

CUT RESISTANT GLOVES offer the ultimate combination of comfort and long lasting, heavy duty protection. Benefits can include excellent cut, abrasion and chemical resistance, while still offering superb dexterity and flexibility. Ideal for hazardous work environments where sharp tools and materials are handled.

Chemical ResistantNitrile offers protection from contact with hazardous chemicals

Puncture ResistantNitrile coating provides physical resistance to punctures and snags

Powerful GripNitrile coating provides excellent wet, dry and light oil grip

Tear ResistantPowerful tear resistant protection to keep hands safe

Lightweight & BreathableUltra lightweight fabric keeps hands cool for all day wear

DexterityForm fitting design & a soft, flexible coating for lightweight comfort

99-1-9792* 6-11 (XS-X2L)Cut Resistant Impact Gloves

AN

SI

CUT

A8

Check with your BDG® sales representative for availability. (Not all gloves available in the USA)

99-1-9623* 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Double dipped nitrile coating+ Elastic wrist for secure fit

and feel+ Sandy Nitrile coating

provides a firm grip

AN

SI

CUT

A3

SAFETY STANDARDS:

99-1-9629* 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Elastic wrist for secure fit and feel

+ Sandy Nitrile coating provides a firm grip

AN

SI

CUT

A9

SAFETY STANDARDS:

CUT-X

99-1-9628* 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Elastic wrist for secure fit and feel

+ Sandy Nitrile coating provides a firm grip

AN

SI

CUT

A8

* Glove design and rating specifications are subject to final verification and may change.

99-1-9791* 6-11 (XS-X2L)Cut Resistant Impact Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ TPR guards for impact protection

+ Elastic wrist for secure fit and feel

+ Sandy Nitrile coating provides a firm grip

AN

SI

CUT

A5

SAFETY STANDARDS:

99-1-9627* 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Sandy Nitrile coating provides a firm grip

+ Elastic wrist for secure fit and feel

AN

SI

CUT

A7

SAFETY STANDARDS:

99-1-9626* 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Elastic wrist for secure fit and feel

+ Sandy Nitrile coating provides a firm grip

AN

SI

CUT

A6

SAFETY STANDARDS:

Check with your BDG® sales representative for availability. (Not all gloves available in the USA)

CUT RESISTANT GLOVES

99-1-9780 7-11 (S-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Polyurethane coated palm for flexibility and breathability

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A24242B

EN388

99-1-9781 6-11 (XS-X2L)HPPE Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Microfoam polyurethane coated palm for flexibility and breathability

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A3

AN

SI

CUT

A3

4442C

EN388

99-1-9790 6-11 (XS-X2L)Cut Resistant Impact Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Nitrile foam coating provides a strong grip and resists oils and grease

+ TPR guards for impact protection

SAFETY STANDARDS:

4X43C

EN388

99-1-9770 7-11 (S-X2L)HPPE 18 Gauge Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Polyurethane coating for a firm grip

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A44X43D

EN388

99-1-9772 7-11 (S-X2L)HPPE 18 Gauge Cut Resistant Gloves

+ High Performance Polyethylene fiber shell for excellent cut resistance

+ Nitrile foam coating for a firm grip

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A44X44D

EN388

99-1-9774 7-11 (S-X2L)Kevlar® 18 Gauge Cut Resistant Gloves

+ Kevlar® shell for excellent cut resistance and comfort

+ Nitrile foam coating for a firm grip

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A43X42D

EN388

99-1-9776 7-11 (S-X2L)Kevlar® 13 Gauge Cut Resistant Gloves

+ Kevlar® shell for excellent cut resistance and comfort

+ Nitrile foam coating for a firm grip

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A44X43D

EN388

99-1-9778 7-11 (S-X2L)HPPE 13 Gauge Cut Resistant Gloves

+ Cut resistant HPPE shell

+ Nitrile foam coating (touchscreen device compatible)

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A44X44D

EN388

Check with your BDG® sales representative for availability. (Not all gloves available in the USA)

CUT RESISTANT GLOVES

99-1-9729 7-11 (S-X2L)Cut Resistant w/Flexible Coating

+ Fiberglass, lycra and nylon cut resistant liner

+ Flexible HPTTM coating

+ Treated with Actifresh® to eliminate bacteria

SAFETY STANDARDS:

AN

SI

CUT

A23341C

EN388

99-9-9731 7-11 (S-X2L)Winter Cut Resistant w/Flexible Coating

+ Terry liner for added warmth

+ Fiberglass, lycra and nylon cut resistant liner

+ Flexible HPTTM coating

SAFETY STANDARDS:

AN

SI

CUT

A44443C

EN388

60-1-1280KV S-X2L (9-13)Utility Leather Glove

+ Premium cowhide grain leather

+ Cut resistant Kevlar® liner

+ 6.5” split leather Gauntlet cuff with reflective strips

+ Fully welted seams

SAFETY STANDARDS:

AN

SI

CUT

A4

AN

SI

PUNCT.

5CUT3

EN388

AN

SI

CUT

A3

10-1-8013 8-12 (XS-XL)Cut Resistant Liner with Dyneema®

+ Seamless Dyneema®, stainless steel, spandex glove liner

+ Elastic wrist for secure fit and feel

+ 13 gauge knit

+ CFIA approved for food contact

SAFETY STANDARDS:

AN

SI

CUT

A5

AN

SI

CUT

A3

50-9-1280KV S-X2L (9-13)Lined Utility Grain Leather Mitt

+ Premium cowhide grain leather

+ Cut resistant Kevlar® liner

+ Thinsulate™ lined (C-100) for added warmth

+ 6.5” split leather Gauntlet cuff with reflective strips

SAFETY STANDARDS:

AN

SI

PUNCT.

5

20-1-1600 S-X2L (9-13)Goatskin Driver w/Kevlar® Liner

+ Premium grain goatskin for a soft, comfortable fit

+ Cut resistant palm w/Kevlar® lining for cut/abrasion resistance

+ Kevlar® stitching

+ Double shirred elastic wrist

SAFETY STANDARDS:

AN

SI

PUNCT.

3A

NS

ICUT

4CUT5

EN388

20-1-11930 S-X2L (9-13)Performance Cut/Impact

+ TPR guards for impact protection

+ Cut resistant palm lined for cut/abrasion resistance

+ Double stitched synthetic leather palm

+ PVC dot pattern for added grip

SAFETY STANDARDS:

AN

SI

CUT

A53544

EN388

99-1-9700 7-10 (S-XL)Kevlar® Seamless Knit

+ Kevlar® shell for excellent cut resistance and comfort

+ Crinkle latex coating offers superb grip and natural puncture resistance

+ Elastic wrist for secure fit and feel

SAFETY STANDARDS:

AN

SI

CUT

A23244X

EN388

Check with your BDG® sales representative for availability. (Not all gloves available in the USA)

2 DIFFERENT TESTS 1 COMMON TEST MACHINE

VERTICAL FORCE

BLADE MOVEMENTTDM-100 TESTTOMODYNAMOMETER

BLADE

TEST MATERIAL

CONDUCTIVE STRIP

WHAT THE STANDARDS MEAN FOR YOU?Hand safety not only relies on selecting the right glove - but selecting the right glove for the task at hand.

From lightweight product handling to heavy duty hazardous work, BDG® cut resistant gloves offer the diversity

and protection for any work environment.

BDG®’S COMMITMENT TO SAFETYData acquired from these tests ensures proper selection

of the right glove with the right protection for any task

at hand. BDG® hand protection products that have

been tested will be marked to easily identify

required safety standards.

Testing standards for cut resistant gloves have changed for ANSI and EN 388. Both now use the same measuring device, the TDM-100 machine, resulting in more comparable data between the standards. The TDM tests the amount of weight (grams/newtons) necessary for a blade to cut through material. This test method provides greater accuracy than the previous EN 388 Coup test, and has the ability to test higher cut materials and provide a larger range of precision results.

OLD ANSI CCPT CUT TEST METHODLEVEL 1 2 3 4 5

WEIGHT* ≥ 200 ≥ 500 ≥ 1000 ≥ 1500 ≥ 3500

* Weight (grams) needed to cut through material with 25 mm blade travel

OLD EN 388 CCPT COUP TEST METHODLEVEL 1 2 3 4 5

INDEX* ≥ 1.2 ≥ 2.5 ≥ 5.0 ≥ 10.0 ≥ 20.0

* Force applied is constant at 5 Newtons

GENERAL PURPOSEMATERIAL HANDLING

ASSEMBLY, AUTO

GENERAL PURPOSELIGHT MATERIAL HANDLING

SHIPPING/RECEIVING

CONSTRUCTIONMETAL/GLASS HANDLINGMANUFACTURING, AUTO

METAL/GLASS HANDLINGMACHINING, HVAC

MANUFACTURING, FABRICATION

METAL/GLASS HANDLINGAUTOMOTIVE ASSEMBLY

METAL FABRICATION

METAL/GLASS HANDLINGFOOD PROCESSING

HEAVY DUTY CONSTRUCTION

* Applications are suggestions only. Proper safety/hazard assessments should be done prior to the use of

any hand protection.

The above information is for educational purposes only. For the most accurate and up-to-date information please consult your respective governing bodies (ANSI/ISEA 105-2016 and/or EN 388 2016).

APPLICATIONS*

ASTM F2992: TDM CUT TEST

ANSIISO 13997: TDM CUT TEST

EN 388

GRAMS ≥ 200A1

LIGHT

2 NEWTONSA

LIGHT

GRAMS ≥ 500A2

LIGHT - MEDIUM

5 NEWTONSB

LIGHT - MEDIUM

GRAMS ≥ 1000A3

MEDIUM

10 NEWTONSC

MEDIUM

GRAMS ≥ 1500A4

MEDIUM - HEAVY

15 NEWTONSD

MEDIUM - HEAVY

GRAMS ≥ 2200A5

HEAVY

22 NEWTONSE

HEAVY

GRAMS ≥ 3000A6

EXTRA HEAVY

30 NEWTONSF

EXTRA HEAVY

GRAMS ≥ 4000A7

EXTRA HEAVY

GRAMS ≥ 5000A8

EXTREME

GRAMS ≥ 6000A9

EXTREME

EN 388

4 X 4 4 D PAbrasion Resistance 0-4 RatingCut (Coup Test) 0-5 RatingTear Resistance 0-4 RatingPuncture Resistance 0-4 RatingCut (TDM Cut Test) A-F RatingImpact Protection P (P, F, or X)

TDM CUT TEST METHOD:Weight (Newtons/Grams) needed to cut through material with 20 mm blade travel.

1 Newton = 102 Grams (approx.)

201-499 2-4.9

5-9.9

10-14.9

15-21.9

22-29.9

30+

500-999

1000-1499

1500-2199

2200-2999

3000-3999

4000-4999

5000-5999

6000+

Results are represented by levels A1 to A9 (Lowest to highest level of cut resistance)

* Previously represented as levels 1 to 5, ISEA 105-2011

Results are represented by levels A to F (Lowest to highest level of cut resistance)

* Previously represented as levels 1 to 5, Coup Test

Bob Dale Gloves Canada4504 - 82 Ave. Edmonton, AB T6B 2S4Ph/Tel: (780) 469-2100 | 1-800-661-7303

Bob Dale Gloves USA1171 N. Fiesta Blvd. Gilbert, AZ 85233Toll Free: 1-855-215-7113

Disclaimer - All data, images, drawings, descriptions and other information furnished by Bob Dale Gloves and Imports Ltd., including verbal information, in or on its website, catalogues, brochures, CDs, pamphlets, price lists, documents or any other promotional media are intended to be as accurate as possible but are given for general information only and are not binding on Bob Dale Gloves and Imports Ltd., its employees, agents or other representatives in respect of a particular order. All information, unless stated otherwise, is subject to reasonable variations. Bob Dale Gloves and Imports Ltd. does not accept responsibility for errors or information which is found to be misleading. Before using products supplied or manufactured by Bob Dale Gloves and Imports Ltd., the customer should satisfy itself of their suitability for any required purpose.