CUT RESISTANT GLOVES - Uline ·  · 2013-06-26ANSI* Standards categorize cut resistant gloves on a...

3
• Butcher, meat packing. • Handling sharp and/or jagged materials. • Fabrication or demolition of metals or pipes. • Applications where cuts, wood splinters or lacerations are possible. • Food chopping/processing. • Cutting ductwork or window frames. • Cutting and installing ceramic tiles. • Hardscaping or other landscaping applications. • Handling construction materials such as asphalt shingles, concrete or brick. • Refuse collection. • HVAC and window frame installation. • Applications where cut risk is moderate. • General warehouse receiving/packing. • Handling power tools, plumbing valves or fixtures. • Installing electrical boxes. • Handling small parts, wires or cables. π CUT RESISTANT GLOVES π 1-800-295-5510 uline.com DYNEEMA ® VS KEVLAR ® Dyneema ® • Lightweight, cool and comfortable. • 15x stronger than steel per unit weight. • Not heat resistant. • May be bleached when laundered. Kevlar ® • Cut and heat resistant. • 5x stronger than steel per unit weight. • May not be bleached when laundered. ©2013 Uline ANSI* Standards categorize cut resistant gloves on a scale that shows increasing levels of protection. ANSI CUT LEVELS TYPICAL APPLICATIONS *American National Standards Institute. 5 High CUt LEVEL 4 High 3 Medium 2 Medium

Transcript of CUT RESISTANT GLOVES - Uline ·  · 2013-06-26ANSI* Standards categorize cut resistant gloves on a...

Page 1: CUT RESISTANT GLOVES - Uline ·  · 2013-06-26ANSI* Standards categorize cut resistant gloves on a scale that shows ... - Used for cutting meat, poultry ... - Individually welded

•Butcher,meatpacking.•Handlingsharpand/orjaggedmaterials.•Fabricationordemolitionofmetalsorpipes.•Applicationswherecuts,woodsplintersorlacerationsarepossible.

•Foodchopping/processing.•Cuttingductworkorwindowframes.•Cuttingandinstallingceramictiles.•Hardscapingorotherlandscapingapplications.

•Handlingconstructionmaterialssuchasasphaltshingles,concreteorbrick.•Refusecollection.•HVACandwindowframeinstallation.•Applicationswherecutriskismoderate.

•Generalwarehousereceiving/packing.•Handlingpowertools,plumbingvalvesorfixtures.• Installingelectricalboxes.•Handlingsmallparts,wiresorcables.

πCUT RESISTANT GLOVES

π 1-800-295-5510 uline.com

DYNEEMA® VS KEVLAR®

Dyneema®

• Lightweight,coolandcomfortable.

• 15xstrongerthansteelperunitweight.

• Notheatresistant.

• Maybebleachedwhenlaundered.

Kevlar®

• Cutandheatresistant.

• 5xstrongerthansteelperunitweight.

• Maynotbebleachedwhenlaundered.

©2013Uline

ANSI* Standards categorize cut resistant gloves on a scale that shows increasing levels of protection.

ANSI CUT LEVELS

TYpICAL AppLICATIONS

*AmericanNationalStandardsInstitute.

5High

CUtLeveL

4High

3Medium

2Medium

Page 2: CUT RESISTANT GLOVES - Uline ·  · 2013-06-26ANSI* Standards categorize cut resistant gloves on a scale that shows ... - Used for cutting meat, poultry ... - Individually welded

Material Comparison

Style Comparison

COATED

• Resistanttoliquidsandchemicals.• Punctureresistant.• Bettergrippingproperties.• Moreabrasionresistant.

UNCOATED

• Notresistanttoliquids,chemicalsandpunctures.• Betterdexterityandmoreflexible.• Breathablefabric;coolertowear.

vs.

Dyneema® Gloves

PRODUCT NAME

IMAGEMODEL NUMBER

SIZING FEATURES BENEFITS/APPLICATIONS

Palm Coated

Uline S-14249 S-XL

-Dyneema/nylon/spandexblend-Polyurethanepalmcoated-Uncoatedopenback-13gauge,lightweight-ANSIcutlevel2

-Lightweightyetcutresistant-Formfittingandcomfortable-Breathable,keepshandscool-Coatedpalmofferseasygripanddurability-Washable

AnsellHyflex®11-624 S-19246 S-XL

-Dyneema/Lycra®blend-Polyurethanepalmcoated-Uncoatedopenback-13gauge,lightweight-ANSIcutlevel2

-Moreflexibleandlighterthan11-627-Formfittingandcomfortable-Breathable,keepshandscool-Coatedpalmofferseasygripanddurability-Washable

AnsellHyflex®11-627 S-15382 S-XL

-Dyneema/Lycrablend-Polyurethanepalmcoated-Uncoatedopenback-13gauge,lightweight-ANSIcutlevel2

-Lightweightyetcutresistant-Formfittingandcomfortable-Higherabrasionthan11-624-Coatedpalmofferseasygripanddurability-Washable

Ninja®Max S-14320 S-XL

-Dyneema/nylon/fiberglassblend-Polyurethaneandnitrileblendpalm

coating-10gauge,mediumweight-ANSIcutlevel3

-Mediumweightcutresistantglove-Bi-polymerpalmcoatingoffersexceptional

abrasionresistance-Preventsoilpenetrationonpalm

Composite/Uncoated

AnsellPawgard74-025

S-19247 M-XL

-Dyneemaandotherhi-techfibers-Extendedcuffforwristprotection-13gauge,lightweight-ANSIcutlevel4

-Lightweightyetcutresistant-MeetsFDAstandardforfoodcontact-Breathableandwashable-Usedforcuttingmeat,poultry,seafood

andvegetables

AnsellPawgard74-048

S-19248 M-XL

-Dyneema,fiberglass,stainlesssteelandpolyesterblend.

-Extendedcuffforwristprotection-10gauge,mediumweight-ANSIcutlevel5

-Mediumweightyetcutresistant-MeetsFDAstandardforfoodcontact-Breathableandwashable-Usedforcuttingmeat,poultry,seafood

andvegetables

DYNEEMA®

• Highperformancepolyethylenefiber.• 15xstrongerthansteel(onequalweightbasis).• Thinandlightweight;comfortabletowear.• Notheatresistant.• Lowmeltingpointof293°F(145°C).• Maybebleachedwhenlaundered.• NotaffectedbyUVlight.• MoreabrasionresistantthanKevlar.

KEVLAR®

• Syntheticpara-aramidpolymerfiber.• 5xstrongerthansteel(onequalweightbasis).• Yellowstringknit.• Heatresistantto932°F(500°C).• Flameresistant;nomeltingpoint.• Sensitivetoacid;can'tbebleached.• UVsensitive;colorfadesfromexposure.

vs.

πCUT RESISTANT GLOVES

Page 3: CUT RESISTANT GLOVES - Uline ·  · 2013-06-26ANSI* Standards categorize cut resistant gloves on a scale that shows ... - Used for cutting meat, poultry ... - Individually welded

Kevlar® Gloves

PRODUCT NAME

IMAGEMODEL NUMBER

SIZING FEATURES BENEFITS/APPLICATIONS

Palm Coated

UlineRubber S-9867 M-XL

-10gaugeKevlarshell,standardweight

-Bluecrinklefinishrubberpalmcoating

-ANSIcutlevel2

-Latexpalmcoatingprovidesexcellentcut,abrasionandslashresistance

-Excellentgrip-Forhandlingabrasiveorsharp-edged

material,heavymetals,cuttingplastics,carpetandcardboards

UlineSuperGription®Coated

S-15331 M-XL

-10gaugeKevlarshell,standardweight

-Double-dippedmicrofinishlatexpalm

-ANSIcutlevel3

-Uniquepalmcoatingprovidescomfort,lesshandfatigueanddurability

-Excellentresistancetocuts,abrasionandslashing

-Forhandlingabrasiveorsharp-edgedmaterial,heavymetals,cuttingplastics,carpetandcardboards

UlineFoamNitrile S-16858 S-XL

-13gaugeKevlar/Lycra®blend-Foamnitrilepalmcoating-ANSIcutlevel2

-Lightweightandformfitting-Reducesriskofsnagsandcuts-Forhandlingsharppartsandassembly-Enhancedgripinlightoilconditions

AnsellHyflex®11-500 S-19216 S-XL

-13gaugeKevlar/spandexblend-Foamnitrilepalmcoating-ANSIcutlevel2

-Lightweightandformfitting-Reducesriskofsnagsandcuts-Forhandlingsharppartsandassembly-Enhancedgripinlightoilconditions

Kevlar Knit

PVCDotKnit S-9866 M-XL-7gaugeheavyweight100%Kevlar-PVCdotsonbothsides-ANSIcutlevel3

-Providescut,abrasionandslashprotection-PVCdotsaddgrip-Ambidextrous,doublethewear

PVCDotKnitFingerless S-17124 M-XL

-7gaugeheavyweight100%Kevlar-PVCdotsonbothsides-ANSIcutlevel3

-Providescut,abrasionandslashprotection-PVCdotsaddgrip-Ambidextrous,doublethewear-Forenvironmentswithouthighriskofcutwhile

fingersensitivityiskey

IndustrialKnit S-7893 M-XL -7gaugeheavyweight100%Kevlar-ANSIcutlevel3

-Providescut,abrasionandslashprotection-Canbeusedaloneandasaliner-Flameretardant

JunkYardDog® S-13385

Men's

Ladies'

-7gaugeheavyweightKevlargloveshell-Addedsplitleatherpalm-Splitleatherreinforcedthumbcrotch-ANSIcutlevel3

-Excellentcutandabrasionresistance-Leatherpalmprovidespunctureresistance-Handlesoilyparts-Idealforhandlingsharpmetalandglass-Providesmoderateheatresistance

Kevlar Sleeves

IndustrialSleeveWithThumbhole

S-11432 OneSize-18"Kevlarsleeve-Heatandflameresistant-ANSIcutlevel3

-Strong,lightweightandflexible-Protectsarmsfromcutsandabrasions-Reversible

Specialty Gloves

SteelMesh S-18009 M-XL-Individuallyweldedstainless

steelrings-ExceedsANSIcutlevel5

-Ergonomicandcomfortable-Reversible-Ambidextrous-Easytoclean-Steelringsprovideexcellentcutand

slashprotection

©2013Uline