Custom HVAC Transducers - Atkinson Electronics · Custom HVAC Transducers PRODUCT OVERVIEW AND...
Transcript of Custom HVAC Transducers - Atkinson Electronics · Custom HVAC Transducers PRODUCT OVERVIEW AND...
Custom HVAC Transducers
PRODUCTOVERVIEW
AND CD-ROM
CATALOG
Solving your signal interface needs for over 25 years
14 West Vine Street -- Murray, Utah 84107Phone (801) 262-6400 -- Fax (801) 261-3796
Toll free (800) 261-3602 -- Email: [email protected] our Web site -- www.atkinsonelectronics.com
PRODUCT APPLICATION CATALOG PRODUCT CATEGORIES
ATKINSON ELECTRONICS, INC. REV 10/0414 West Vine Street, Murray, UT 84107Phone (801) 262-6400, 1-800-261-3602Fax (801) 261-3796, E-MAIL: [email protected]
SIGNAL ISOLATION DEVICESSIA08 - 1 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1DIA08 - 2 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1DISM-E - 2 CH 0-10V / 4-20mA ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . 1
SIGNAL CONVERTERS AND SCALERSASM1 - ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2SBM - SIGNAL BUFFER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2DCIM-SC - SIGNAL CONVERTER AND SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SORM - SIGNAL OVERRIDE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3VMAC - VOLTAGE TO mA CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3PACM - PROGRAMMED ANALOG SCALING MODULE (EMBEDDED CONTROLLER MODULE) . . . . . . . . 3
ASM2 - PHASE CUT TO ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4DISM-D - 2 CH PHASE CUT TO ANALOG ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . 4DFCM - 2 CH ANALOG INPUT TO FLOATING CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DPCM - 2 CH ANALOG INPUT TO PWM CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5DSAM - 2 CH ANALOG SIGNAL SEQUENCING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5SIA05A - PSI TO ANALOG SIGNAL CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SIA07A - 6 INPUT HIGH/ LOW/ AVERAGE SIGNAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . 6UPAC-D - UNIVERSAL PULSE INPUT TO ANALOG CONVERTER (rev.D) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6UPAC-CNT - PULSE COUNTER TO 4-20mA and 0-10V DC OR 0-5V DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UNIVERSAL INPUT AND SIGNAL CONVERTERS
UIPCM - UNIVERSAL INPUT TO PULSE CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7UIPT - UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7UIRO - UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ADJUSTABLE & FIXED VOLTAGE/CURRENT RELAYS
AVR1A - ADJUSTABLE VOLTAGE SENSITIVE RELAY - ANALOG CONTROL . . . . . . . . . . . . . . . . . . . . . . . 8AVR4C - ADJUSTABLE 4 CH. VOLTAGE SENSITIVE RELAYS - ANALOG CONTROL . . . . . . . . . . . . . . . . . 8VRDC - ADJUSTABLE DC VOLTAGE SENSITIVE RELAY- WITH TIME DELAY . . . . . . . . . . . . . . . . . . . . . . 8
PMR4 - PWM TO MULTISTAGE RELAY MODULE (2/4 RELAYS) for DELTA BACstat II . . . . . . . . . . . . . . . 9MCRM - MULTI-CHANNEL RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9LCRM - LOW CURRENT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PRM - PILOT RELAY MODULE 24VAC CONTROL VOLTAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10DPRM - DUAL PILOT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAGNETIC VALVE, PHASE CUT SIGNAL DRIVERSDCIM-PCD - PHASE CUT SIGNAL DRIVER MODULE 27W, 40W, 80W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11PCDO - PHASE CUT DUAL OUTPUT MODULE 40W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11SMVD - STAEFA MAGNETIC VALVE DRIVER 40W, 80W, & 120W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
S1Pi - STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12DCIM-FP - FLOATING & PWM INPUT TO PHASE CUT CONVERTER 27W, 40W, 80W . . . . . . . . . . . . . . . . . 12
SIGNAL INDICATION
DIM3 - DIGITAL INDICATION METER - PS +5, 6, 15VDC, & 24V AC (LCD OR LED) . . . . . . . . . . . . . . . . . 13DIM3-LP - DIGITAL INDICATION METER - LOOP POWERED (LCD ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . 13DIM3-RSP - DIGITAL LCD METER WITH SM2 RESET POTENTIOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RH-LCD - DIGITAL INDICATION ROOM HOUSING - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . 14RS-LCD - DIGITAL INDICATION ROOM SENSOR - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . . 14RS-2101D - STAEFA DDC VERSION ROOM SENSOR WITH LCD DIGITAL DISPLAY . . . . . . . . . . . . . . . . . . . 14
PRODUCT APPLICATION CATALOG PRODUCT CATEGORIES
ATKINSON ELECTRONICS, INC. REV 10/0414 West Vine Street, Murray, UT 84107Phone (801) 262-6400, 1-800-261-3602Fax (801) 261-3796, E-MAIL: [email protected]
SENSORS - TRANSMITTERSAD590 - ANALOG DEVICES CURRENT TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15RS-DCP - ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15VRWM - VANDAL RESISTANT, WALL MOUNT SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
UMATR - UNIVERSAL mA TRANSMITTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SPECIALTY CONTROLLERS & INTERFACE MODULESWAM - WIRE ADDER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CRM2 - STAEFA SM2 CUSTOM RANGE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17HOA-100 - 4 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17HOA-102S - 2 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD W/ SWITCH STATUS . . . . . . . . . . . . . . . . . . . . 17
Di16CIB - DIGITAL 16 CHANNEL ISOLATION BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18ROSM - DOOR ACTUATED ROOM OFFSET SWITCHING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
POWER SUPPLY ISOLATION DEVICESIPS-2/4 - ISOLATED POWER SUPPLY 2 & 4 CHANNEL AC/DC ISOLATION . . . . . . . . . . . . . . . . . . . . . . . . 19IPXFMR - ISOLATED POWER TRANSFORMER 2, 4, & 6 CHANNEL AC ISOLATION . . . . . . . . . . . . . . . . . 19DCPS - DC POWER SUPPLY MODULE (NON ISOLATED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
COMMUNICATION DEVICES INCLUDING LONWORKSAETI-232 - SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20AETI-485 - SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20AETI-FO - SM2-TTL TO RS-485 TO FIBER OPTIC CABLE COMMUNICATION REPEATER . . . . . . . . . . . . . . 20
DRFB - DUAL CHANNEL RS-485 TO FIBER OPTIC COMMUNICATIONS MODULE . . . . . . . . . . . . . . . . . . 21FR485 - FIBER REPEATER 485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LNFR - LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE & DUAL FIBER OUTPUTS . . . . . . . 22PLFT24 - POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V . . . . . . . . . . . . . . . . . . . . . . . . . 22RCM4 - RELAY CONTROL MODULE, FREE TOPOLOGY & POWER LINE TRANSCEIVER . . . . . . . . . . . . 22
AUXILIARY PRODUCTSNSFB - NOISE SUPPRESSION & FILTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23SNAP TRACK - RDI SNAP TRACK 2.125", 3", 3.25" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23FUSE - LITTELFUSE 2AG SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
JUMPERS - AMP .1" SHUNT WITH HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24GAUGE KIT - 0-30 PSI GAUGE KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24VIP FB420I - PNEUTRONICS 4-20mA TO 3-15PSI TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PRODUCT PRICING AND WARRANTY INFORMATIONPRICE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25TERMS AND CONDITIONS OF SALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
FOR COMPLETE PRODUCT INFORMATION, PLEASE REFER TO THE ENCLOSED CD OR VISIT OUR WEB SITEAT www.atkinsonelectronics.com.
2005 PRODUCT OVERVIEW SIGNAL ISOLATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PRECISION SIGNAL ISOLATOR / CONVERTER MODULE SIA08
FEATURESv Jumper selectable voltage/current inputv On-board isolation transformerv 4-20mA output will source a 750Ω impedancev Direct/Reverse jumper for output
APPLICATIONSv Precision signal isolation for EMS systemsv VFD signal isolationv General signal input/output isolation
DESCRIPTIONThe SIA08 is a precision, signal isolator module, that has anInput/Output isolation of 2.5KV and onboard isolationtransformer. The Inputs/Outputs are jumper selectable.
DUAL PRECISION SIGNAL ISOLATOR / CONVERTER MODULE DIA08
FEATURESv Dual channel input/output isolationv On-board isolation transformerv Jumper selectable voltage/current inputs & outputsv 4-20 mA output will source a 600ΩΩ impedancev Direct/Reverse jumper for each output
APPLICATIONSv Precision signal isolation for EMS systemsv VFD signal isolationv Sequencing two 4-20 mA, 0-5V or 0-10V DC signals
from single analog signal
DESCRIPTIONThe DIA08 is a two channel precision, signal isolator, that hasan Input/Output isolation of 2.5KV and onboard isolationtransformer. The Inputs/Outputs are jumper selectable.
DUAL ISOLATED SIGNAL MODULE DISM-E
FEATURESv 2 channel isolated outputv On-board isolation transformer & EMI noise filteringv Jumper selectable voltage/current outputv 4 to 20 mA output will source a 650ΩΩ loadv Built-in over-current protection
APPLICATIONSv 0-10V DC and 4-20mA signal splitting or sequencingv 2 channel signal isolatorv Dual channel VFD driver
DESCRIPTION
The DISM-E is a two channel precision, signal isolator, thathas an Input/Output isolation of 2.5KV and onboard isolationtransformer. The Inputs/Outputs are jumper selectable.
2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ANALOG SCALING MODULE ASM1
FEATURESv 24V AC operationv Output can sink input’s pull-up voltagev Optional Zero & Span potentiometersv Small size 1.10" by 2.19"v Two mounting options
APPLICATIONSv Analog 0 to 5V DC & 0 to 10V DC scalingv Rescale non - standard sensorsv Rescale non - standard voltages
DESCRIPTIONThe ASM1 is designed as an analog signal scaling module torescale control voltages or sensor signals to meet the inputrequirements of various types of controllers.
SIGNAL BUFFER MODULE SBM
FEATURESv Single or dual input option jumperv Four buffered outputsv 2 3/16" Snap Track Mounting
APPLICATIONSv Master/slave configuration of a control signal for up
to five controllersv Master/slave configuration of two control signals for
two additional controllersv Signal buffering to four valve or damper actuators
DESCRIPTION
The SBM is a signal buffer module, two inputs with fourbuffered outputs that track the input signal.
DCIM SIGNAL CONVERTER MODULE DCIM-SC
FEATURESv Optically isolated inputsv Fused 24V AC power supplyv Field adjustable outputv Input & power LED indication v Optional minimum position pot
APPLICATIONSv Phase cut to mA/V DCv Scaling, inverting, sequencingv High/Low signal selectionv VFD's, dampers, chiller reset
DESCRIPTIONThe DCIM-SC is designed for conditioning 0 to 10V,4 to 20mA, or converting Staefa’s phase cut signal to standard0 to 10V, 4 to 20mA control signal.
2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
SIGNAL OVERRIDE MODULE SORM
FEATURESv Analog 0 - 10V DC signal input/outputv Minimum position override potentiometerv Freeze stat override inputv 2 3/16" Snap Track Mounting
APPLICATIONSv SM2 Plus outside damper control with minimum
position and lockout controlv SM2 Plus reheat valve control with freeze stat
override
DESCRIPTIONThe SORM is a dual function signal override module,designed for Staefa’s SM2 Plus controller. It provides aminimum position and freeze stat override capability.
ANALOG VOLTAGE TO mA CONVERTER MODULE VMAC
FEATURESv 24V AC or DC operationv Zero potentiometerv Small size 1.10" by 2.19"v Two mounting options
APPLICATIONSv Coverts 0 - 10V DC to 4 - 20mA to drive HVAC
Actuators (see specifications for calibration)v NOT for VFD applications
DESCRIPTION
The VMAC is a voltage to 4 to 20mA converter module,designed as a low cost signal converter for driving actuatorsthat use a 4-20mA input signal.
PROGRAMMABLE ANALOG CONTROL MODULE PACM
FEATURESv Two channel conversionv Transformer isolation onboardv Isolated 24V AC for velocity sensor
APPLICATIONSv Velocity sensor conversionsv Velocity sensor linearizationv Square root extractionv Air quality control for roof top unitsv Multi-channel signal processing
DESCRIPTIONThe PACM is a programed analog control module. It isdesigned to accept multiple input signals and perform specificfunctions (nonlinear signal conversions, square root extraction,proportional control, etc.).
2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ANALOG SCALING MODULE ASM2
FEATURESv 24V AC or DC operationv Optically isolated inputv Zero & Span potentiometersv Small size 1.10" by 2.19"
APPLICATIONSv Converts phase cut to drive valve or damper
actuatorsv Converts phase cut to drive most VFD’s v Provides phase cut isolation for multiple zone
valvesDESCRIPTIONThe ASM2 is designed as a Staefa phase cut signalconverter module for interfacing to 0 to 5V or 0 to 10V DCinput devices.
DUAL ISOLATED SIGNAL MODULE DISM-D
FEATURESv 2 channel isolated outputv On-board isolation transformer & EMI noise filteringv Jumper selectable voltage/current outputv 4 to 20 mA output will source a 650ΩΩ loadv Built-in over-current protection
APPLICATIONSv Phase cut to 0-10V DC / 4-20mA signal splitting or
sequencingv 2 channel signal isolatorv Dual channel VFD driver
DESCRIPTION
The DISM-D is a two channel precision, signal converter,that has an Input/Output isolation of 2.5KV and onboardisolation transformer. The outputs are jumper selectable.
DUAL CHANNEL FLOATING CONTROLLER MODULE DFCM
FEATURESv Jumper selectable analog inputv Jumper selectable output pulse timing v Two 24V AC tri-state triac outputsv Dual pipe system change-over option
APPLICATIONSv 0 - 20 mA to tri-state floatingv 0 - 10V DC to tri-state floatingv Phase cut to tri-state floatingv Dual tri-state damper or valve operation
DESCRIPTIONThe DFCM is a two channel analog to tri-state floatingcontroller module. It converts 0 to 10V, 0 to 20mA or phasecut to a tri-state 24V AC output signal rated for 4 Amps.
2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
DUAL CHANNEL PWM CONTROLLER MODULE DPCM
FEATURESv Jumper selectable analog inputv Jumper selectable output pulse timing v Two 24V AC PWM triac outputs
APPLICATIONSv 0 - 20 mA to pulse width modulationv 0 - 10V DC to pulse width modulationv Phase cut to pulse width modulationv Dual PWM valve or damper operation
DESCRIPTIONThe DPCM is a two channel analog to PWM controller module.It converts 0 to 10V, 0 to 20mA or phase cut to a pulse widthmodulated 24V AC output signal rated for 4 Amps.
DUAL CHANNEL SEQUENCING ANALOG MODULE DSAM
FEATURESv Dual channel phase cut to analog outputv Dual channel voltage/mA to voltage outputv Jumper selectable sequencing option v Direct or reverse options per output
APPLICATIONSv Dual phase cut to 0 to 10V DC conversionv Phase cut to sequenced 0 to 10V DC outputsv 0 to 10V DC to sequenced 0 to 10V DC outputsv Dual 0 to 10V DC damper or valve operation
DESCRIPTION
The DSAM is a two channel analog sequencing module. Itsequences either 0 to 20mA or 0 to 10V DC input to two 0 to10V DC outputs.
PRESSURE INPUT TO ANALOG OUTPUT MODULE SIA05A
FEATURESv Measures differential & gauge pressuresv Linear 4-20 mA & 0-10V DC outputsv External differential sensor inputsv Temperature compensation for accuracy
APPLICATIONSv Differential pressure monitoringv Pneumatic system monitoringv Pneumatic to analog conversion
DESCRIPTIONThe SIA05A is a pressure to analog signal transducerconfigured for differential pressure 3-15psi or 0-20psi. Itprovides both a linear current and voltage output signals.
2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
SPECIAL FUNCTION ANALOG SIGNAL INTERFACE SIA07A
FEATURESv 6 simultaneous signal inputsv Second power supply for sensors, etc.v EMI noise filtering on outputsv ZERO and SPAN adjustments
APPLICATIONSv High/Low signal selectionv Signal summingv Sensor averagingv Custom signal scaling
DESCRIPTIONThe SIA07A is a multiple input, special function interfacemodule, designed to perform high and/or low signal selection,averaging, or summing, of up to six (6) like analog signals. Itwill provide a standard or custom voltage signal or 4-20 mAsignal output.
UNIVERSAL PULSE TO ANALOG CONVERTER MODULE UPAC
FEATURESv Field selectable PWM, tri-state inputsv 256 step resolution, no rolloverv Timing calibrated to input signalv Optically isolated inputsv Input and power LED indication
APPLICATIONSv PWM or tri-state floating to analog conversion v DO Control of VFD’s or damper actuators
DESCRIPTIONThe UPAC is an universal pulse to analog converter module,designed to convert PWM or tri-state pulse signals to analog0 to 10VDC, 0 to 5VDC or 4 to 20mA signals.
PULSE COUNTER TO ANALOG CONVERTER MODULE UPAC-CNT
FEATURESv Field selectable input pulse per secondv 256 step resolution, no rolloverv Timing calibrated to input signalv Optically isolated inputs
APPLICATIONSv Pulse per second to analog conversion v KW pulse meter to analog conversionv Flow pulse meter to analog conversion
DESCRIPTIONThe UPAC-CNT is a customized application specific interfacemodule designed to convert pulse from KW, water or flowmeters to an analog signal.
2005 PRODUCT OVERVIEW UNIVERSAL INPUT SIGNAL CONVERTERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
UNIVERSAL INPUT TO PULSE CONVERTER MODULE UIPCM
FEATURESv Optional feedback input for closed loop controlv Jumper selectable analog inputv DIP switch selectable input/output pulse types v Open collector or 24V AC triac output available
APPLICATIONSv 0 - 20 mA & 0 - 10V DC to tri-state floating or PWMv PWM to tri-state floatingv Phase cut to tri-state floating or PWM
DESCRIPTIONThe UIPCM accepts all standard analog, pulse, and phase cutsignals and converts them to a PWM or tri-state floating AC orDC voltage outputs. Optional feedback input available.
UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER MODULE UIPT
FEATURESv Non-bleed device (no air usage in steady state)v Internal accurate closed loop controlv DIP switch selectable pulse & phase cut inputs,
direct or reverse actionv Jumper selectable analog inputsv Does not require instrument quality airv Manual positioning adjustmentv Optional bleed or maintained output on power loss
APPLICATIONSv 0 to 20 mA or 0 to 10 V to pneumaticv PWM or tri-state floating to pneumaticv Phase cut to pneumatic
DESCRIPTIONThe UIPT accepts all standard analog, pulse and phase cutsignals and converts them into a 3 to 15 psi pressure outputsignal. Optional feedback output available.
UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE UIRO
FEATURESv Jumper selectable analog inputv DIP switch selectable input type & time basesv 256 step output resolutionv Field changeable resistance output module
APPLICATIONSv 0 - 20mA, 0 - 10V, and phase cut to resistancev PWM and tri-state floating to resistance
DESCRIPTION
The UIRO accepts all standard analog, pulse, and phase cutinput signals and converts them to a linear 256 stepresistance output. Resistance module field changeable.
2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ADJUSTABLE VOLTAGE SENSITIVE RELAY AVR1A
FEATURESv Linear operationv 12A/250V AC contactsv Single-turn or multi-turn adjustment potsv Jumper selectable inputv LED relay position indication
APPLICATIONSv Analog to on/off conversionv Differential controlv Analog signal alarmsv Low/High limit set points
DESCRIPTIONThe AVR1A is an adjustable voltage/current relay. It isdesigned to provide adjustable trip on/off points on a SPDTrelay with contacts rated for 12 Amps 250V AC.
FOUR CHANNEL ADJUSTABLE VOLTAGE SENSITIVE RELAY AVR4C
FEATURESv Linear operationv 12A/120V AC contactsv Four channel for stagingv Jumper selectable inputv LED relay position indication
APPLICATIONSv Analog to on/off controlv Four step staging controlv Analog signal alarmsv Low/High limit set points
DESCRIPTION
The AVR4C is a 4 channel adjustable voltage/current relay. Itis designed to provide adjustable trip on/off points on fourSPDT relays with contacts rated for 12 Amps 120V AC.
ADJUSTABLE VOLTAGE SENSITIVE RELAY MODULE WITH TIME DELAY VRDC
FEATURESv Operates over 10 to 35V DC range and 24V ACv Adjustable thresholds for cut-in and cut-out points v 12 Amp SPDT relay contactv Reversible action with the cut-in, cut-out settings v Adjustable time delay 0 to 255 sec. on cut-in
APPLICATIONSv Low voltage cutoff and generator controlv HVAC heating & cooling stagingv Hydro-electric power shuntv Battery charge controller
DESCRIPTION
The VRDC is an adjustable DC voltage relay module,designed for applications where a varying DC voltage is usedto switch a relay, such as in generator control.
2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PULSE WIDTH MODULATION MULTISTAGE RELAY PMR4
FEATURESv Linear staging operationv 12A/120V AC relay contactsv 24V AC or DC operationv LED relay position indication APPLICATIONSv PWM to on/off controlv Two stage heating, two stage coolingv Four step staging control DESCRIPTIONThe PMR4 is a pulse to relay output module designed towork with Delta’s BACstat II DNT-T Series Controllers orother PWM output controllers. It converts standard PWMtiming range signals to relay outputs.
MULTIPLE CHANNEL SPDT RELAY MODULE MCRM FEATURESv 10 channels of SPDT relays v LED indication for each relayv .187" Spade terminationv 24V AC or DC operationv Small size (2.187" X 8.0")
APPLICATIONSv Voltage/current signal switching v Indication lamp status switching DESCRIPTION
The MCRM is a ten channel SPDT relay module. Each relaychannel has LED indication, input termination and relaycontact terminations. It is available in a 1 Amp rated relay(MCRM-1) or a 10 Amp rated relay (MCRM-10) .
LOW CURRENT RELAY MODULE LCRM
FEATURESv Analog signal conversion to SPDT contactv 12Amp/120V AC rated contactsv LED relay position indicationv 24V AC or DC operationv Small size 1.1" by 2.19"
APPLICATIONSv Analog conversion to on/off controlv Analog lighting controlv Remote fan start - stop control
DESCRIPTIONThe LCRM is a low current voltage relay module. It is designedto allow a switched voltage signal to trigger a SPDT relay. Ithas a relay output rated at 12A @ 120V AC.
2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PILOT RELAY MODULE PRM
FEATURESv 24V AC or DC operationv 12Amp/120V AC rated contactsv LED relay indicationv Small size 1.2" by 2.3"
APPLICATIONSv Remote mounted control relayv Maintain low voltage panel requirementsv Remote fan start - stop controlv Status feedback relay
DESCRIPTIONThe PRM is a 24V AC/DC Pilot Relay Module. A green LEDindicates when the relay is energized. The PRM uses a SPDTrelay output rated at 12A @ 120V AC.
DUAL PILOT RELAY MODULE DPRM
FEATURESv 24V AC or DC operationv 15 Amp/120V AC rated contactsv Two pilot relays in one enclosurev Small size 1.2" by 2.3"
APPLICATIONSv Remote mounted control relaysv Maintain low voltage panel requirementsv Status feedback relay
DESCRIPTIONThe DPRM is a dual pilot relay module that accepts 24VAC/DC control signals and provides SPDT (form C) relaycontact outputs rated at 15A @ 120V AC and 15A @ 28V DC.
2005 PRODUCT OVERVIEW PHASE CUT SIGNAL DRIVERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PHASE CUT SIGNAL DRIVER MODULE DCIM-PCD
FEATURESv Input to output isolationv 27, 40, or 80 watts output powerv Fused 24V AC power supplyv Input and power LED indication
APPLICATIONSv mA/V DC to phase cut conversionv DDC control of Staefa magnetic valvesv Phase cut signal scaling & sequencingv High or low signal selectionv Minimum position override
DESCRIPTIONThe DCIM-PCD is designed for converting 0 to 10V DC or4 to 20mA signals to Staefa’s phase cut signal for drivingmagnetic valves and damper actuators.
DUAL PHASE CUT SIGNAL DRIVER MODULE PCDO
FEATURESv Two channel outputv Isolated phase cut inputsv Isolated milliamp inputsv High reliability mosfet outputsv On-board fuse protection
APPLICATIONSv Signal splittingv Dual valve driverv Same signal sequencingv One or two channel mA or DC to phase-cut
DESCRIPTIONThe PCDO is a two channel 40W phase cut driver module, thatconverts 0 to 10V, 4 to 20mA signal to the Staefa phase cutsignal for driving magnetic valves and damper actuators.
STAEFA MAGNETIC VALVE DRIVER MODULE SMVD
FEATURESv High reliabilityv 40, 80 or 120 watt power ratingsv Universal analog inputv Optically isolated phase cut inputv Lower operating temperature
APPLICATIONSv Phase cut amplificationv Milliamp & DC input to phase cut outputv Valve sequencing from same signalv Isolated milliamp input valve driver
DESCRIPTION
The SMVD is designed to drive Staefa’s large magnetic valves.It is available as a phase cut amplifier or as a 0 to 10V DC/4-20mA converter module.
2005 PRODUCT OVERVIEW PHASE CUT SIGNAL DRIVERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE S1Pi
FEATURESv Direct replacement for Staefa’s Smart 1 SMPIv Mounts on original SMPI 4" sq. platev 27, 40, or 80 watts output power optionsv Fused 24V AC power supplyv Minimum position or manual potentiometer
APPLICATIONSv Replacement for Staefa’s SMPI valve driverv 0 to 20mA to phase cut conversionv 0 to 10V DC to phase cut conversion
DESCRIPTIONThe S1Pi (Smart 1 Proportional Interface Module) is a directreplacement part for Staefa’s SMPI (Smart 1 ProportionalInterface). It interfaces between SM1 controller and zone valve.
DCIM PULSE TO PHASE CUT CONVERTER MODULE DCIM-FP
FEATURESv Field selectable PWM, tri-state inputsv 256 step resolution, no rolloverv Timing calibrated to input signalv Optically isolated inputsv Input and power LED indicationv Short resistant mosfet output
APPLICATIONSv Pulse width modulation to phase cutv Tri-state floating to phase cut v DO Control of Staefa mag valves & actuators
DESCRIPTIONThe DCIM-FP is designed for converting PWM or tri-state pulsesignals to Staefa’s phase cut signal for driving Staefa’smagnetic valves and damper actuators.
2005 PRODUCT OVERVIEW SIGNAL INDICATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
DIGITAL INDICATION METER DIM3
FEATURESv Easy to read numbersv On-board power supplyv Field calibration adjustmentsv Ordering choice of LCD or LED display
APPLICATIONSv Temperature indicationv Humidity indicationv Percentage of operation displayv Differential pressure indication
DESCRIPTIONThe DIM3 is a 3½ digit panel meter that can be ordered ineither a LCD or LED version. It consists of Datel’s DMS-30meter and a sub board for sensor or voltage input signalscaling.
DIGITAL INDICATION METER LOOP POWERED DIM3-LP
FEATURESv Easy to read numbersv Loop powered; no external supply requiredv Field calibration adjustmentsv Compact size
APPLICATIONSv Temperature indicationv Humidity indicationv Percentage of operation displayv Differential pressure indication
DESCRIPTIONThe DIM3-LP is a 3½ digit LCD panel meter that is looppowered. It consists of Datel’s DMS-30LCD meter and a subboard for input signal scaling and powering the LCD display.
DIGITAL INDICATION METER WITH SET POINT POTENTIOMETER DIM3-RSP
FEATURESv Easy to read 3½ digit displayv Choice of LCD or LED displayv Optional power supply for 24V AC/DC operationv Remote set point potentiometerv Push button for set point displayv User friendly calibration adjustments
APPLICATIONSv Remote set point potentiometer with display
DESCRIPTION
The DIM3-RSP is a 3½ digit panel meter that can be orderedin either a LCD or LED version. It consists of Datel’s DMS-30meter and a sub board with remote set-point potentiometer,and push button for viewing set-point value while setting.
2005 PRODUCT OVERVIEW SIGNAL INDICATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ROOM HOUSING WITH LCD DISPLAY RH-LCD
FEATURESv 3 digit LCD displayv Display calibration potv Universal mountv Neutral stylingv Mounting ring optional (from Staefa)
APPLICATIONSv Temperature indicationv Humidity indication
DESCRIPTIONThe RH-LCD is a 3 digit LCD display mounted in a StaefaRoom Housing. It is designed to accept a voltage signal anddisplay an output range 0 to 100 or to 999 for RH sensors orvarious temperature sensors.
ROOM SENSOR WITH LCD DISPLAY RS-LCD
FEATURESv 3 digit LCD display with temperature sensorv Display & sensor calibration potsv Set point & override switches (optional)v 8F & 8C selection switchv Service tool jackv Custom face plates available upon requestv Mounting ring optional (from Staefa)
APPLICATIONSv Smart II room sensor w/temperature displayv SMVU room sensor w/temperature displayv RS room sensor w/temperature display
DESCRIPTIONThe RSXXXXD is a Staefa Room Sensor with a LCD display.It is designed to provide a visual display of the roomtemperature. Standard options available.
ROOM SENSOR WITH LCD DISPLAY FOR SM2-DDC RS-2101D
FEATURESv 3 digit LCD display with thermistor sensorv Display & sensor calibration potsv Override switch (optional)v 8F & 8C selection switchv Service tool jackv Custom face plates available upon requestv Mounting ring optional (from Staefa)
APPLICATIONSv Smart II DDC room sensor w/temperature display
DESCRIPTION
The RS-2101D is a Staefa Smart 2 DDC Room Sensor with LCD display. It is designed to provide a visual display of theroom temperature. Standard options available.
2005 PRODUCT OVERVIEW SENSORS - TRANSMITTERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ANALOG DEVICES TEMPERATURE SENSOR AD590
FEATURESv Linear current output 1µµ A/Kv Wide range -5588C to 15088Cv Two-terminal device: voltage in/current outv Laser trimmed to ±2.588C accuracy v Linearity: ±.888C over full range (AD590K) v Wide power supply range: +4V to 30V
APPLICATIONSv Accurate temperature measurement and controlv OSA, hot /chilled water temperature sensing
DESCRIPTIONThe AD590 is a two wire linear temperature sensor thatproduces a linear current output 1µ A/8K. The AD590 comeswith 12" leads. Duct and well mounting available.
ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR RS-DCP
FEATURESv Dual temperature sensorsv Dual communication jacksv Universal mount, mounting ring optional
APPLICATIONSv Dual Smart II communications port & sensors in
single wall housing to serve two Smart II VAV zonecontrollers where one location is specified
DESCRIPTIONThe RS-DCP (Dual Communications Port) is used with theSMART II Controller in zone temperature controlapplications. In addition to two temperature sensors,separate communication jacks are provided for the twoStaefa controllers.
VANDAL RESISTANT WALL MOUNT SENSOR VRWM
FEATURESv Vandal resistant stainless steelv Easy mounting to single gang boxv Neutral appearancev Standard or custom sensors
APPLICATIONSv Room sensor for schools, correctional facilities, or
any other public areas
DESCRIPTION
The VRWM is a vandal resistant wall mount sensor, thatcontains one of several standard temperature sensors. Itconsists of a standard single gang stainless steel plate withthe desired sensor mounted with thermal compound inside. A plexiglass backing is then permanently attached.
2005 PRODUCT OVERVIEW SENSORS - TRANSMITTERS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
UNIVERSAL 2-WIRE CURRENT LOOP TRANSMITTER UMATR
FEATURESv Easy mounting to single gang boxv Accepts standard or custom sensorsv Wide power supply range 12 to 40V DCv Field calibration potentiometers provided
APPLICATIONSv Transmit temperature signals long distancesv Narrow temperature rangesv Voltage to 4-20mA loop conversionv Remote temperature sensing
DESCRIPTIONThe UMATR is a 2-wire, 4 to 20mA, transmitter designed toconvert RTD’s, AD590's, thermistors and other low levelsignals to a 4 to 20mA current loop signal. Loop Powered.
SPECIALTY CONTROLLERS & INTERFACES
WIRE ADDER MODULE WAM
FEATURESv Easily mounts in furnace control boxv Output LED indication for fan, heating & cooling
APPLICATIONSv The WAM allows HVAC contractors to reuse the
existing 2-wire thermostat cable on air conditioningand furnace retrofits where installing a 4-wire cablewould be required
DESCRIPTIONThe WAM allows you to use a battery powered electronicthermostat and the existing two wires to save pulling a newcable on those impossible A/C add-on jobs. The signalcombiner mounts in the thermostat, sends the heating, coolingand fan signals to the WAM mounted in the furnace. TheWAM contacts pull in the heating, cooling and fan relays.
2005 PRODUCT OVERVIEW SPECIALTY CONTROLLERS & INTERFACES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
CUSTOM RANGE MODULE FOR SMART II CRM2
FEATURESv 100 % Staefa Smart II compatiblev Factory can customize for most applicationsv Provides pull-up or load resistor for temperature
sensors or current transmittersv Voltage divider for 0 to 10V signals
APPLICATIONSv Retrofits involving non Staefa sensorsv Narrow temperature ranges for chilled and/or hot
water control loopsv Narrowing range of 4-20mA transducers
DESCRIPTIONThe purpose of the CRM2 is to provide additional ranges forStaefa sensors and enable other types of sensors to be usedwith the Smart II and Smart II Plus controllers.
HAND-OFF-AUTO BOARD HOA-100
FEATURESv Buffered manual output signalv 2 3/16" snap track mountingv Standoff mountingv 4 independent channels
APPLICATIONSv Damper signal overridev Hand-Off-Auto switching of control signals
DESCRIPTIONThe HOA-100 is a 4 channel hand-off-auto board designedto pass a voltage signal in auto mode or provide an op-ampbuffered adjustable voltage signal in hand mode.
HAND-OFF-AUTO BOARD W/ STATUS FEEDBACK HOA-102S
FEATURESv Buffered manual output signalv Buffered status output signalv 2 3/16" snap track mountingv Standoff mountingv 2 independent channels
APPLICATIONSv Damper signal overridev Hand-Off-Auto switching of control signals
DESCRIPTIONThe HOA-102S is a 2 channel hand-off-auto board designed topass a voltage signal in auto mode or provide an op-ampbuffered adjustable voltage signal in hand mode.
2005 PRODUCT OVERVIEW SPECIALTY CONTROLLERS & INTERFACES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
DIGITAL 16 CHANNEL ISOLATION BOARD Di16CIB
FEATURESv Input to output isolationv 24V AC/DC input to DC open collector outputv Input LED indication
APPLICATIONSv Monitor 24V AC digital signals with isolationv Data acquisition of Htg/Clg signals using Delta’s
DSC-1616 Controller
DESCRIPTION
The Di16CIB is designed to provide both signal conversion(AC to DC open collector) and input to output signalisolation.
DOOR ACTUATED ROOM OFFSET SWITCHING MODULE ROSM
FEATURESv Four selectable Supply CFM voltage settings with
switch position feedback valuev Supply CFM offset activated by N.O. door switchv Two adjustable exhaust CFM voltage outputsv Set-up jumper to simulate door for easy output
configuration
APPLICATIONSv Constant volume lab with Phoenix Supply/Exhaust
values with door offset
DESCRIPTION
The ROSM is designed to provide an additional level ofcontainment in either a negative or positive pressurelaboratory environment.
2005 PRODUCT OVERVIEW POWER SUPPLY ISOLATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ISOLATION AC/DC POWER SUPPLY MODULE IPS-2/4
FEATURESv Transformer isolationv Selectable voltage outputsv Thermal overload protectedv Fused outputsv Snap track mounted
APPLICATIONSv AC power isolationv Isolated DC power supply, ± DC power supplyv 2, 3 & 4 wire transmitter supply
DESCRIPTIONThe IPS-2, or IPS-4 is a multi channel isolation AC/DCpower supply designed to provide isolated 24V AC andadjustable DC voltages for powering peripheral devices.
ISOLATION AC POWER SUPPLY MODULE IPXFMR
FEATURESv Each 24V AC output is isolatedv Available in 2, 4 and 6 outputsv Available with 24V or 110V AC primaryv Fuse protection on primaryv Snap track mounted
APPLICATIONSv 24V AC isolation power supplyv Provide 24V AC isolation between full-wave
and half-wave bridge devicesv Eliminate ground loops
DESCRIPTIONThe IPXFMR is a multiple output isolated AC power supplydesigned to provide up to six (6) 24V AC isolated outputs, forpowering peripheral devices.
DC POWER SUPPLY MODULE DCPS
FEATURESv Adjustable output voltagev Thermal overload protectedv Accepts either 24V AC or DCv Snap track mounted
APPLICATIONSv Power stand-alone sensorsv Power 4 to 20mA transmittersv Power panel meters
DESCRIPTION
The DCPS is an adjustable DC power supply designed toconvert 24V AC to a DC voltage. It offers both half-waveand full-wave bridge rectification circuits as standardfeatures. (LVR voltage range 4.5V to 17V DC, HVR range13V to 26V DC)
2005 PRODUCT OVERVIEW COMMUNICATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-232 AETI-232
FEATURESv Two Staefa SM2 TTL repeater ports v Staefa’s SM2 TTL communication to RS-232v Transformer isolation onboardv Small enough to mount inside a 4" sq. handy box
APPLICATIONSv Convert Staefa’s Talon Network Manager’s RS-232
to Staefa’s SM2 TTL communication formatv Convert Tridium’s Network Manager’s RS-232 to
Staefa’s SM2 TTL communication format
DESCRIPTIONThe AETI-232 is a TTL to RS-232 repeater/converter modulethat is designed to extend or expand the capacity of Staefa’sTTL communication trunks.
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-485 AETI-485
FEATURESv Two Staefa SM2 TTL repeater ports v Staefa’s SM2 TTL communication to RS-485v Transformer isolation onboardv Small enough to mount inside a 4" sq. handy box
APPLICATIONSv Extend Staefa’s SM2 TTL communication trunkv Convert Staefa’s SM2 TTL communication to RS-485
communication trunk v Convert Staefa’s RS-485 communication trunk to
Staefa’s SM2 TTL communication trunk
DESCRIPTIONThe AETI-485 is a TTL to RS-485 repeater/converter modulethat is designed to extend or expand the capacity of Staefa’sTTL communication trunks.
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - FIBER OPTIC AETI-FO
FEATURESv One Staefa SM2 TTL trunk I/Ov One Staefa NCRS RS-485 trunk I/Ov One Transmit/Receive fiber optic I/Ov Selectable distance settings for fiber transmitterv Transformer isolation onboard
APPLICATIONSv Extend Staefa’s trunk communications between
buildings via RS-485 or fiber optic cablev Convert Staefa’s communication trunk to a fiber
optic (non electrical) serial communication trunk
DESCRIPTIONThe AETI-FO is a fiber optic repeater module. It acceptsStaefa’s TTL and RS-485 communication trunks and transmitsand receives on two 62.5/125µm fiber optic cables.
2005 PRODUCT OVERVIEW COMMUNICATION DEVICES
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
DUAL RS-485 TO FIBER OPTIC INTERFACE DRFB
FEATURESv Two Staefa NCRS type RS-485 LAN/ trunk I/Osv Two Transmit/Receive fiber optic I/Osv Transformer isolation onboard
APPLICATIONSv Extend Staefa’s LAN trunk between buildings via
fiber optic cable
DESCRIPTIONThe DRFB is a RS-485 to fiber optic convertor module. It isdesigned to extend Staefa’s NCRS RS-485 LAN connectionsbeyond that of standard wire connection lengths.
RS-485 TO FIBER OPTIC REPEATER FR485
FEATURESv RS-485 to Multi-Mode fiberv One or Two fiber optic channelsv 19.2 to 78+K baud ratesv Transparent repeater functionv Optical signal regenerationv LED signal indication
APPLICATIONSv RS-485 Bacnet or proprietary serial trunksv Twisted pair to fiber optic communicationsv Electrical noise immunity between buildings by
utilizing fiberv Extends network up to 2.5Kmv Hub or single point to fiber compatible
DESCRIPTIONThe FR485 is a RS-485 to fiber optic convertor moduleavailable as a single fiber pair output repeater or dual fiber pairoutput repeater.
2005 PRODUCT OVERVIEW LONWORKSs
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
LONWORKSss NETWORK FIBER OPTIC REPEATER LNFR
FEATURES
v LonWorksss FTT-10A Free Topology to Multi-Mode fiberv Transparent repeater functionv LED signal indicationv One or two fiber optic channelsv Supports Ring, Bus, and Point to Point topologies
APPLICATIONSv Twisted pair to fiber optic communicationsv Electric noise immunityv Extends network up to 2.5Km
DESCRIPTION
The LNFR is a twisted pair to fiber optic repeater which istransparent to the network and allows multiple free topologynetworks to be connected over greater distances.
24V POWER LINE TO FREE TOPOLOGY LONWORKSs ROUTER PLFT24
FEATURESv Connects twisted pair nodes to 24V AC power line systemv Implements standard LonWorksss router functions:
configured, learning, bridge & repeaterv Echelonss router core, PLT22 & FTT-10A transceiversv LED communication indication: band in use, packet
detect, near and far service pinv 24V AC line -to-neutral transformer isolated coupling
APPLICATIONSv Free topology to 24V AC power line communication as a
configured router, bridge or repeater
DESCRIPTION
The PLFT24 connects LonWorkss twisted pair networks toLonWorkss power line networks operating at 24 Volts AC.
RELAY CONTROL MODULE RCM4
FEATURESv Optional: FTT-10A Free Topology Transceiver or
PLT-22 Power Line Transceiver communicationv Four Relay outputs: 1 Amp contact or voltage switchingv One optically isolated digital inputv LED relay position indicationv Encapsulated for wet environmentsv Includes input for rain or soil moisture sensor
APPLICATIONSv Underground sprinkler valve controlv Network load control: valves, pumps, fans, etc.v Digital outputs for remote indication
DESCRIPTIONThe RCM4 is a single input, four relay output LON node. It can beused in applications which require remote network control of twoposition loads such as pumps, fans, valves, sprinkler valves.
2005 PRODUCT OVERVIEW AUXILIARY PRODUCTS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
NOISE SUPPRESSION & FILTER BOARD NSFB
FEATURESv Dual channel noise filteringv Two types of noise filtration technics used:
11 DC common mode choke coils11 EMI suppression filter capacitors
v EMI noise reduction on frequencies between 10KHzto 1MHz
APPLICATIONSv Noise radiated from the inputs of some VFDsv Filter control signals that have picked up noise
radiated from electrical or RF equipment
DESCRIPTIONThe NSFB is a dual channel noise suppression filter board thatuses passive filtration technics to filter noise coming from theinput of VFDs, electrical or RF equipment.
RDI SNAP TRACK SNAP TRACK
STOCKED SIZES
v 8TK2-24 2.187"W x 24"Lv 8TK-48 2.187"W x 48"Lv TK2-24 3.0"W x 24"Lv TK2-48 3.0"W x 48"L
LITTLEFUSE - 2 AG CARTRIDGE FUSE FUSE
STOCKED SIZES
v 225.250 ¼ amp.v 225.500 ½ amp.v 225.750 ¾ amp.v 225 001 1 amp.v 225 01.5 1½ amp.v 225 002 2 amp.v 225 003 3 amp.v 225 006 6 amp.
Shipped 5 fuses per package
2005 PRODUCT OVERVIEW AUXILIARY PRODUCTS
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
SHORTING JUMPERS OR SHUNTS SHUNTS
PART NUMBER
v AMP #881545-4 .1" pin spacing
Shipped 5 shunts per package
3 - 15 PSI GAUGE KIT GAUGE KIT
KIT CONTAINS:
v DC-1401 0 TO 30 PSI gaugev N4-135-1 Parker gauge teev Mounting block for Pneutronics VIP transducerv 3" long ¼ tubing
PNEUTRONICS 4-20MA PNEUMATIC TRANSDUCER VIP-F-B/420I/315PSI
FEATURESv Non-bleed device (no air consumption in steady
state) 3-15 PSI adjustablev Jumper selectable analog inputsv Field calibration pots v Optional pressure feedback signalv Unaffected by mounting position
APPLICATIONSv 4 to 20 mA to pneumaticv 1 to 5V to pneumatic
DESCRIPTION
The Pneutronics VIP-F-B/420I/315PSI is a 4 to 20mA or1 to 5V DC to 3 to 15 PSI pneumatic transducer.
DISCONTINUED
REPLACED BY UIPT
ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE
AD590-D - TEMPERATURE SENSOR W/ 8" DUCT PROBE 27.00AD590-P - TEMPERATURE SENSOR W/12" PIGTAILS 15.00AD590-W - TEMPERATURE SENSOR W/ 3" WELL 37.00
AETI-232 /TTL2 - SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER 136.00AETI-485 /TTL1 - SM2-TTL TO RS-485 COMMUNICATION REPEATER 115.00AETI-485 /TTL2 - SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER 120.00AETI-FO /TTL1/RS-485 - SM2-TTL TO RS-485 TO FIBER OPTIC COMMUNICATION REPEATER 180.00
ASM1 /XXX/XXX/X - ANALOG SCALING MODULE (ANY ‘S’ VERSION, CALL FOR ‘P’ VERSION) 35.00ASM2 /PC/XXX - PHASE CUT TO 0 - 5V OR 0 - 10V DC CONVERTER MODULE 32.00
AVR1 /PC - 0 - 20V PHASE CUT INPUT TO 1 SPDT RELAY 65.00AVR1A /SEL/X/XX - VOLTAGE/CURRENT INPUT TO 1 SPDT RELAY (ANY VERSION) 50.00AVR4A /XX-XX - DUAL SIGNAL INPUTS TO 4 SPDT RELAYS (ANY VERSION) 130.00AVR4A /XXX/2CH - SINGLE VDC, mA, OR PC INPUT TO 2 SPDT RELAYS 110.00AVR4A /XXX/3CH - SINGLE VDC, mA, OR PC INPUT TO 3 SPDT RELAYS 120.00
CRM2 /XXXX/XX - SM2 STANDARD INPUT RANGE MODULES (ANY VERSION) 20.00CRM2 /CUSTOM - SM2 CUSTOM RANGE MODULE 30.00
DCIM-FP /PCX-X - PULSED INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT VERSIONS 124.00
DCIM-PCD /MA/PCX-X - 4 - 20mA, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT 80.00DCIM-PCD/2MA/PCX-X - (2) 4 - 20mA OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT 124.00DCIM-PCD /PC/PCX-X - 10-90% PHASE CUT, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT 80.00DCIM-PCD /2PC/PCX-X - (2) PHASE CUT OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT 118.00DCIM-PCD /PCX-AMP - PHASE CUT AMPLIFIER MODULE 27,40,80 WATT 54.00DCIM-PCD /135Ω/PCX-X - 135 OHM INPUT TO PHASE CUT OUTPUT 27 WATT 94.00
DCIM-SC /PC-VDC/-X p PHASE CUT, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT DCIM-SC /MA-VDC/-X u 4 - 20mA, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT DCIM-SC /135Ω/MA l 135 OHM INPUT TO 4 - 20mA OUTPUTDCIM-SC /135Ω/VDC n 135 OHM INPUT TO VOLTAGE OUTPUT
DCPS /XVR - DC POWER SUPPLY (L = 4.5V - 17VDC, H = 13.5V - 26VDC) OUTPUT 30.00
DFCM /XX - DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE 85.00DFCM /XX/ICO - DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE w/CHANGE-OVER 95.00DPCM /XX/PWM - DUAL CHANNEL PWM 24V AC OUTPUT MODULE 80.00
Di16CIB/X - DIGITAL 16 CHANNEL ISOLATION BOARD 100.00
DIA08 /SEL/XX - DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE 155.00DIA08 /CUSTOM - CUSTOM DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE CALL
DIM-3 LCD +5V STD - DIGITAL LCD METER +5VDC PWR STANDARD RANGES 125.00DIM-3 LCD W/PS STD - DIGITAL LCD METER 8-24VAC/DC PWR STANDARD RANGES 140.00DIM-3 LED +5V STD - DIGITAL LED METER +5VDC PWR STANDARD RANGES 155.00DIM-3 LED W/PS STD - DIGITAL LED METER 8-24VAC/DC PWR STANDARD RANGES 170.00DIM-3 LP - DIGITAL LCD METER LOOP POWERED STANDARD RANGES 125.00DIM-3 RSP LCD - DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE 175.00DIM-3 RSP LED - DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE 205.00
DISM-D /PC1 - SINGLE PHASE CUT TO 4 - 20mA, 0 - 10V DC ISO. MODULE W/TRANSFORMER 120.00DISM-D /PC2 - DUAL CH. PHASE CUT TO 4 - 20mA, 0 - 10VDC ISO. MODULE W/TRANSFORMER 170.00DISM-D /PC/SEQ. - SINGLE PHASE CUT TO SEQUENCING OUTPUTS ISO. MODULE 175.00DISM-E /CH1 - SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER 100.00DISM-E /CH2 - DUAL CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER 140.00DISM-E /SEQ-XX - SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC SEQUENCING OUTPUTS ISO. MODULE 150.00
DPRM/2 - DUAL PILOT 15 AMP RELAY MODULE 24V AC/DC COIL 32.00
p ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-Du ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-El ITEM HAS BEEN DISCONTINUED - REPLACED BY SIA05A /OHM /XXn ITEM HAS BEEN DISCONTINUED - REPLACED BY ASM1/135Ω/XX
Prices are subject to change without notice.
ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE
DRFB /STD - DUAL RS-485 TO FIBER OPTIC COMMUNICATION REPEATER 320.00DRFB /SR - SINGLE RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER 300.00DRFB /DR - DUAL RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER 400.00DRFB /FR - FIBER OPTIC COMMUNICATION REPEATER THREE I/O’s 325.00
DSAM /PC - DUAL CH. PHASE CUT TO 0 - 10V DC MODULE 75.00DSAM /VDC - DUAL CH. 4 - 20mA, 0 - 10V DC TO 0 - 10V DC MODULE 75.00
FR485/S - RS-485 TO FIBER OPTIC REPEATER, SINGLE FIBER OUTPUT CALLFR485/D - RS-485 TO FIBER OPTIC REPEATER, DUAL FIBER OUTPUT CALL
FVR4 /SEL/X - FIXED 4 CH. VOLTAGE SENSITIVE RELAY-ANALOG SIGNAL 90.00
HOA-100 /XX - 4 CH. 0 - 10V OR 0 - 15V DC HAND - OFF - AUTO BOARD 125.00HOA-102S /XX - 2 CH. 0 - 10V OR 0 -15V DC HAND - OFF - AUTO BOARD WITH FB. STATUS 65.00
IPS-2 /XXX - ISOLATED DUAL DC POWER SUPPLY PRI. 24 OR 120V AC 55.00IPS-2C /XXX - ISOLATED DUAL AC AND DC POWER SUPPLY PRI. 24 OR 120V AC 45.00IPS-4 /XXX - ISOLATED QUAD DC POWER SUPPLY PRI. 24 OR 120V AC 110.00IPS-4C /XXX - ISOLATED QUAD AC AND DC POWER SUPPLY PRI. 24 OR 120V AC 90.00IPS-4SB - ISOLATED DUAL AC & DC POWER SUPPLY 400MA PRI. 24 OR 120V AC 65.00
IPXFMR-2 /2/XXX - ISO. TRANSFORMER 2 OUTPUT 24V AC @ 250mA, PRI. 24 OR 120V AC 25.00IPXFMR-2 /4/XXX - ISO. TRANSFORMER 4 OUTPUT 24V AC @ 250mA, PRI. 24 OR 120V AC 47.50IPXFMR-2 /6/XXX - ISO. TRANSFORMER 6 OUTPUT 24V AC @ 250mA, PRI. 24 OR 120V AC 70.00
LCRM /XX - LOW CURRENT RELAY MODULE 0-10V DC INPUT (EITHER VERSION) 25.00
LNFR/S - LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE FIBER OUTPUTS 260.00LNFR/D - LONWORKS NETWORK FIBER OPTIC REPEATER, DUAL FIBER OUTPUTS 350.00
MASC - 4 CHANNEL CUSTOM ANALOG SIGNAL SCALER (ANY VERSION) 125.00
MCRM-1 - MULTI 10 CH. SPDT 1 AMP RELAY MODULE 122.00MCRM-10 - MULTI 10 CH. SPDT 10 AMP RELAY MODULE 100.00
MRB1 - DIGITAL INTERFACE FOR STAEFA’S DCRM RELAY BOARD 45.00
NSFB - DUAL CH. NOISE SUPPRESSION FILTER BOARD 36.00
PACM / / /01 - PROGRAMMED ANALOG CONTROLLER MODULE (EMBEDDED CONTROLLER) 85.00PACM / / /01S - PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR 185.00PACM / /XXX /02 - PROGRAMMED ANALOG CONTROLLER MODULE LINEARIZE SM2-SVP SENSOR 85.00PACM / /XXX/02S - PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR 185.00PACM /XXX/XXX/031 - PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. SINGLE) 85.00PACM /XXX/XXX/032 - PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. DUAL) 85.00PACM /XXX/XXX/04 - PROGRAMMED ANALOG CONTROLLER MODULE (3 INPUT AVE. OF2) 85.00PACM /XXX/XXX/05 - PROGRAMMED ANALOG CONTROLLER MODULE (INDOOR AIR QUALITY) CALLPACM /XXX/XXX/06 - PROGRAMMED ANALOG CONTROLLER MODULE (MIXED AIR CONTROL) CALLPACM / / /07 - PROGRAMMED ANALOG CONTROLLER MODULE (FKV-32 TO SVP OUTPUT) 85.00PACM /XXX/XXX/08 - PROGRAMMED ANALOG CONTROLLER MODULE (2K NTC THERMISTOR) 100.00
PCDO /XX/PCM-XX - DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (1:1 SEQ) 145.00PCDO /XX/PCM-SEQ - DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (2:1 SEQ) 145.00PCDO //PCM-AMP - DUAL CHANNEL PHASE CUT TO PHASE CUT AMP 40 WATT 95.00
PDM1 - PULSE DIVISION MODULE (42 TO 4256) V DC & OPEN COLLECTOR OUTPUT 50.00
PLFT24 - POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V 800.00
PMR4/2 - PWM TO MULTISTAGE RELAY MODULE (2 RELAYS) for DELTA BACstat II 60.00PMR4 - PWM TO MULTISTAGE RELAY MODULE (4 RELAYS) for DELTA BACstat II 70.00
PRM24 - PILOT 10 AMP RELAY MODULE 24V AC/DC COIL 16.80
PSIM-MASTER - PHOENIX-STAEFA INTERFACE MODULE MASTER W/ PC TO 0 -10V DC 200.00PSIM-SLAVE - PHOENIX-STAEFA INTERFACE MODULE SLAVE W/O PC TO 0 -10V DC 180.00PSIM-HOC - PSIM HEATING OVERRIDE CONTROL BOARD 50.00PSIM-STBD - PSIM SCREW TERMINAL BOARD 25.00PSIM-CABLES - PSIM CABLES FOR MASTER OR SLAVE INTERFACE BOARD CALL
Prices are subject to change without notice.
ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE
RCM4/FTT - RELAY CONTROL MODULE, FREE TOPOLOGY TRANSCEIVER 250.00RCM4/PLT - RELAY CONTROL MODULE, POWER LINE TRANSCEIVER 325.00
RH-LCD /XX/XXX - DIGITAL DISPLAY (STAEFA HOUSING) VDC/mA SIGNALS 82.00
ROSM/X - DOOR ACTUATED ROOM OFFSET SWITCHING MODULE 60.00
RS-DCP /XXX - RM SENSOR WITH DUAL SENSOR & COM PORTS (T-30, T-1, AD590) 118.00RS-LCD - RM SENSOR SEE RSC-RS BELOW OR SM2-RS, SMVU-RS, ON NEXT PAGERSC-RS-1000D - RM SENSOR WITH DIGITAL DISPLAY (for Staefa RS Controller T-1 sensor) 93.00
S1PI /STD - SMART 1 PROPORTIONAL PHASE CUT DRIVER 16W 109.00S1PI /VDC-MA/XX - 0 - 10V DC OR 4 - 20mA TO PHASE CUT DRIVER 16, 27, 40, 80 WATTS 100.00
SBM - SIGNAL BUFFER MODULE (1 TO 4 CH) 35.00
SIA02K /XXX/XXX - VOLTAGE OR CURRENT TO KLIMO SENSOR VOLTAGE OUTPUT 84.00
SIA03A /PC/MA - 10-90% PHASE CUT, TO 4 - 20mA OUTPUT MODULE 120.00SIA03A /2XX/MA - TWO INPUT, H.L.S.A. FUNCTION, TO 4 - 20mA OUTPUT MODULE 120.00SIA03A /CUSTOM - CUSTOM SIA03A MODULE CALL
SIA05A /STD-15 - 3 TO 15 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT 100.00SIA05A /STD-30 - 3 TO 30 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT 100.00SIA05A /OHM - 2 OR 3 WIRE RESISTANCE TO 4 - 20mA & VDC OUTPUT 70.00SIA05A /CUSTOM - CUSTOM INPUT TO CUSTOM OR STANDARD OUTPUT CALL
SIA07A ///X/XXX/VDC/X - 2 TO 6 INPUTS, VOLTAGE OUTPUT, ANY FUNCTION CODE 99.00SIA07A ///X/XXX/MA /X - 2 TO 6 INPUTS, 4 - 20mA OUTPUT, ANY FUNCTION CODE 114.00SIA07A /CUSTOM - 2 TO 6 CUSTOM INPUTS, VOLTAGE OR mA OUTPUT, ANY FUNCTION CODE CALL
SIA08 /SEL/5V - SELECTABLE INPUT TRANSFORMER ISO. 0 - 5V, 4 - 20mA OUTPUT 110.00SIA08 /SEL/10V - SELECTABLE INPUT TRANSFORMER ISO. 0 - 10V, 4 - 20mA OUTPUT 110.00SIA08 /CUSTOM - CUSTOM INPUT OR OUTPUT RANGES TRANSFORMER ISOLATED CALL
SM2-RS-1000D - T-30 RM SENSOR WITH DIGITAL DISPLAY 82.00SM2-RS-1010D - T-30 RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY 84.50SM2-RS-1101D - T-30 RM SENSOR WITH SETPOINT & DIGITAL DISPLAY 92.50SM2-RS-1111D - T-30 RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY 95.00
SM2-RS-2101D - T-30 RM SENSOR DDC VERSION WITH SETPOINT & DIGITAL DISPLAY 95.00
SMVU-RS-1000D - T-1 RM SENSOR WITH DIGITAL DISPLAY 93.00SMVU-RS-1010D - T-1 RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY 95.50SMVU-RS-1101D - T-1 RM SENSOR WITH SETPOINT & DIGITAL DISPLAY 103.50SMVU-RS-1111D - T-1 RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY 105.00
SMVD /AMP/XX W - PHASE CUT AMPLIFIER MODULE 40, 80 WATTS 64.00SMVD /AMP/120W - PHASE CUT AMPLIFIER MODULE 120 WATTS 78.00SMVD /UNI/XX W - PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS 96.00SMVD /UNI/120W - PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 120 WATTS 110.00SMVD /SEQ/XX W - UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 40,80 WATTS 96.00SMVD /SEQ/120W - UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 120 WATTS 110.00SMVD /MAI/XX W - ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS 100.00SMVD /MAI/120W - ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 120 WATTS 114.00SMVD /MIS/XX W - ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 40, 80W 100.00SMVD /MIS/120W - ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 120W 114.00
SORM - SIGNAL OVERRIDE MODULE 35.00SSRM - START STOP RELAY MODULE 43.00
UIPCM /AC - UNI INPUT TO PWM OR 3 PT FLOATING 24 VAC OUTPUT 105.00UIPCM /DC - UNI INPUT TO PWM OR 3 PT FLOATING OPEN COLLECTOR DC OUTPUT 100.00UIPCM /CUSTOM - UNI INPUT TO PWM OR 3 PT FLOATING CUSTOM CALL
UIPT /M/STD - UNI INPUT PNEUMATIC TRANSDUCER (MAINTAINED) 135.00UIPT /B/STD - UNI INPUT PNEUMATIC TRANSDUCER (BLEED) 140.00UIPT /X/FBX - UNI INPUT PNEUMATIC TRANSDUCER WITH FEEDBACK 150.00
Prices are subject to change without notice.
ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE
UIRO /STD - UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT 160.00UIRO /STD-ADJ. - UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT ADJUSTABLE BASE 170.00UIRO /CUSTOM - UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT CALLUIRO /CUSTOM-ADJ - UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT ADJUSTABLE CALLUIRO_RM /STD - UIRO RESISTANCE MODULE STANDARD RESISTANCE OUTPUT 30.00UIRO_RM /CUSTOM - UIRO RESISTANCE MODULE CUSTOM RESISTANCE OUTPUT 40.00
UMATR /AD590 - 4 - 20mA TRANSMITTER W/ AD590 SENSOR 65.00UMATR /RTD - 4 - 20mA TRANSMITTER SET-UP FOR 100Ω RTD SENSOR 65.00UMATR /VDC - 4 - 20mA TRANSMITTER VOLTAGE INPUT 65.00UMATR /XXXX - DUCT OR WELL HOUSING FOR UMATR & SENSOR 15.00
UPAC /STD - FLT OR PWM TO 4 - 20mA AND 0-10V DC CONVERTER 85.00UPAC /ADJ - FLT OR PWM TO ADJUSTABLE VOLTAGE 0 - 5V TO 0 - 15V DC 85.00UPAC /CNT - PULSE COUNTER TO 4-20mA AND 0-10V DC OR 0-5V DC 90.00UPAC /CUSTOM - CUSTOM PULSE INPUT TO ANALOG CONVERTER CALL
VMAC/S - VOLTAGE TO MA CONVERTER (SNAP TRACK MOUNTING) 38.00VMAC/P - VOLTAGE TO MA CONVERTER (POTTED - DOUBLE STICK TAPE MOUNTING) 45.00
VPM1 - VOLTAGE TO PWM MODULE FOR “GE” MODULATING MOTOR 58.00
VRDC - ADJ. DC VOLT. RELAY w/ TIME DELAY (NON-ENCAPSULATED, PS 24V AC) 55.00VRDC/48V - VRDC WITH 60.4KΩ RESISTOR FOR 0-60V DC OPERATION 55.00
VRWM /F-T30 - VANDAL RESISTANT SENSOR W/ STAEFA'S F-T30 66.00VRWM /(2)F-T30 - VANDAL RESISTANT SENSOR W/ TWO (2) STAEFA'S F-T30 110.00VRWM /T-1 - VANDAL RESISTANT SENSOR W/ STAEFA'S T-1 66.00VRWM /AD590 - VANDAL RESISTANT SENSOR W/ AD590 36.00
WAM2/4 - WIRE ADDER MODULE 2/4 58.00
AUXILIARY PRODUCTS
FUSE /225.250 - LITTELFUSE .25 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225.500 - LITTELFUSE .50 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225.750 - LITTELFUSE .75 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225 001 - LITTELFUSE 1 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225 01.5 - LITTELFUSE 1.5 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225 002 - LITTELFUSE 2 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225 003 - LITTELFUSE 3 AMP. 2AG SERIES (PACKAGE OF 5) 2.50FUSE /225 006 - LITTELFUSE 6 AMP. 2AG SERIES (PACKAGE OF 5) 2.50
SNAP /8TK2-24 - RDI SNAP TRACK 2.19" WIDE X 24" LONG 5.50SNAP /8TK2-48 - RDI SNAP TRACK 2.19" WIDE X 48" LONG 9.50SNAP /TK2-24 - RDI SNAP TRACK 3.0" WIDE X 24" LONG 5.50SNAP /TK2-48 - RDI SNAP TRACK 3.0" WIDE X 48" LONG 9.50
SHUNTS - .1" - AMP # 881545 JUMPER W/ HANDLE (PACKAGE OF 5) 2.50
GAUGE SET - 0 TO 30PSI GAUGE SET 15.00
VIP-F-B/4-20I/3-15PSI - 4 TO 20MA INPUT TO 3 TO 15 PSI OUTPUT TRANSDUCER
Prices are subject to change without notice.
TERMS AND CONDITIONS PRODUCT CATALOG
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
Atkinson Electronics, Inc. sells its products under the following terms and conditions. Any additional or different terms must bespecifically agreed to, in writing, prior to any sale. Terms are subject to change and current terms in effect at the time of sale willapply.
ORDERING
To place an order, contact Atkinson Electronics, Inc. and ask for a Customer Service Engineer in the Circuit Board Division. Theminimum order amount is One Hundred Dollars ($100.00) list price.
All telephone orders should be confirmed in writing prior to shipment with a mailed or faxed written confirming order including yourcontact at Atkinson Electronics. Mark your confirming document "CONFIRMING ORDER, DO NOT DUPLICATE". This procedureis necessary to make sure that our products meet your requirements.
WRITTEN OR FAXED ORDERS
Send your order to the attention of "Circuit Board Division Order Entry." Please include the following on your order:
v Purchase Order Numberv Bill and Ship To Addressesv Quantity, Part Number, Description of Parts Ordered and Calibration Specifications (if any)v Specify method of Shipment, FEDEX EC. (2 day), FEDEX STD. (Next afternoon), FEDEX PR. (Next morning), UPS, etc.v Requested Ship Date and/or Required Delivery Datev Buyers Name, Telephone and Fax Number
Upon receipt we will fax to you a confirmation of your order, pricing and estimated ship date and an assigned Sales Order Number.Please refer to this number in all further communications regarding this order.
INTERNATIONAL ORDERS
International shipments are subject to additional handling, export documentation and shipping charges, as well as any appropriateduties, taxes or fees. If you deal with a Customs Broker, please provide us with the broker's name, address, telephone number,and a copy of their import documents so we may process your order quickly. Terms for payment are prepaid in US dollars byElectronic Funds Transfer to our bank or a bank check in US dollars.
SCHEDULED ORDERS
We encourage blanket purchase orders with scheduled releases. We request each release be shipped to a single destination andreleases be confirmed 90 days in advance of scheduled delivery. If delivery is not taken on the quantities ordered, the Customerwill be invoiced for the difference in price between the quantities ordered and the quantities accepted, if any, based on the discountschedule in effect on the date that the original order was placed.
DELIVERY
Promises of delivery from stock are subject to prior sale. Delivery dates are not guaranteed, but are estimated on the basis of ourimmediate receipt of all needed information supplied by the Customer. We will, in good faith, attempt to meet estimated deliverydates, but we do not accept responsibility for delays resulting from circumstances beyond our reasonable control. AtkinsonElectronics, Inc. is relieved of all risks of loss or damage of goods upon our delivery of goods to the carrier.
EXPEDITING
Normal delivery runs 5 days to 10 days. If an order requires expediting, please discuss your needs with Customer Service, as wewill do our best to meet your requirements at minimal additional costs. There is a minimum expedite charge of $25.00 or 10%of total order, whichever is greater, (plus shipping cost) for orders expedited from factory stock. Expedite charges may vary basedupon your requirements. In order to keep expedite charges at a minimum, give us as much information and advance warning aspossible. We may have to adjust another customer's order, reschedule production or use other outside services to meet yourexpediting needs.
SHIPMENTS
We ship by FEDEX Economy (2 day) whenever possible unless another qualified carrier is requested. FEDEX Standard (Nextafternoon), FEDEX Priority (Next morning), or other arrangements are optional. All shipments are F.O.B. Salt Lake City, Utah andshipping and handling charges are at prevailing rates. Orders received after 1:00 P.M. (Salt Lake City) will be processed on thenext business day.
TERMS AND CONDITIONS PRODUCT CATALOG
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
BACK ORDERS
In the event that an order cannot be completely filled, the balance of the order will be back ordered and will be shipped as soonas possible. If you want the entire order shipped at one time, specify "SHIP COMPLETE".
CLAIMS
Any discrepancies in shipments must be brought to the attention of our Customer Service Representatives within ten (10)working days of receipt of shipment. Deductions from remittances will not be allowed unless authorized by AtkinsonElectronics, Inc. in writing.
PAYMENT TERMS
Payment terms are C.O.D. or prepaid unless an open account is established.
OPEN ACCOUNTS
We offer terms of Net 30 days to all Customers who have established an open account with Atkinson Electronics, Inc. To establishan open account, please contact the credit department and complete an application and forward it to Atkinson Electronics, Inc.,ATTN: CREDIT MANAGER. It generally takes two to three days to process your account once the credit application is received.
v The invoice number MUST appear on your check stub to insure proper credit to your account!v An additional 1.5% per month service charge will be added to any account balance aging over 30 days.v Accounts with past due balances beyond 60 days will be placed on credit hold.v It is our policy not to ship to any account that is past due.
In the event that it becomes necessary for Atkinson Electronics, Inc. to take legal action to enforce the provisions of this agreementor to obtain redress for the breach of any provision hereof, the buyer shall pay the costs of such action, including reasonableattorney fees. All legal proceedings that are in anyway related to this agreement shall be conducted in a court of competentjurisdiction in Salt Lake County, Utah.
PRICES
The price of goods sold are those in effect at the time of sale. All prices are subject to change without notice and exclude anytaxes, shipping and handling charges. Please contact Customer Service for current pricing. We will be pleased to furnish writtenquotations either by mail or facsimile upon request. Quoted prices and conditions are valid for 30 days from the date of the writtenconfirmation of the quote, unless otherwise specified.
QUANTITY DISCOUNTS
Resale discounts will be extended to account-holding customers who are involved in the manufacture or resale of electroniccontrol products. Quantity discounts apply to each specific item or product part number. Product part numbers with separate inputor output specifications count as separate items for quantity pricing unless specifically noted in a price quote. The discountstructure is as follows:
v Quantity of 1 to 4 pieces 25% off the list pricev Quantity of 5 to 9 pieces 27.5% off the list pricev Quantity of 10 to 24 pieces 30% off the list pricev Quantity of 25 to 49 pieces 32.5% off the list pricev For Quantities of 50 or more call for a price quote
Retail discounts will be extended to Industrial, Commercial, and Institutional account-holding customers who are involved ininstallation or maintenance of their own electronic control systems. Quantity discounts apply to each specific item or product partnumber. Product part numbers with separate input or output specifications count as separate items for quantity pricing unlessspecifically noted in a price quote. The discount structure is as follows:
v Quantity of 1 to 4 pieces list v Quantity of 5 to 9 pieces 5% off the list pricev Quantity of 10 to 24 pieces 10% off the list pricev Quantity of 25 to 49 pieces 15% off the list pricev For Quantities of 50 or more call for a price quote
TERMS AND CONDITIONS PRODUCT CATALOG
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
TAXES
All applicable and required taxes, duties and governmental fees are additional charges which will be added to the selling price.Utah customers must furnish an appropriate resale exemption certificate or sales tax will be added to the invoice prior to shipment.
RETURNS
YOU MUST call customer service for an RMA # before returning any product to the factory. Shipments to the factory notcovered by a valid RMA number are subject to refusal of delivery. The RMA number should be marked on the outside of thereturn package as "ATTN: Customer Service, RMA # ". To avoid delays, please include the following information inside thepackage:
v Returned Merchandise Authorization (RMA) Numberv Customer Order Number and Invoice Numberv Returnee's name, address and telephone numberv Product model number and date purchasedv Reason for returnv Additional/repair instructions
Preship Warranty Replacements (PWR) are made only if we are supplied with the sales order number or invoice number of theoriginal device. Atkinson Electronics, Inc. will pay FEDEX Economy charges on the Preship Warranty Replacement. If thedefective units are not covered by our warranty, or if the defect is due to miss-use or improper installation, the customer will bebilled for both the Preship Warranty Replacement at 75% of list price and the freight.
All returns must be shipped prepaid to the factory.
Customers will be billed for any Preship Warranty Replacements if the defective units are not returned to the factory within 30 days.
RETURNS FOR CREDIT
Only new and unused products may be returned for credit. Atkinson Electronics, Inc. inspects, retests and repackages ALLproducts returned for credit. All returns for credit are subject to a retest and restock charge (25% of purchase price but no lessthan $25.00). Products that are customized for specialty applications are not usually resalable items and for this reason creditwill not normally be given if these products are returned. Debit memos will not be accepted without written authorization and anRMA number. After the return for credit is processed, the proper credit will be issued. No cash refunds will be issued unlessrequested in writing.
RETURNS OF NON-WARRANTED PRODUCTS
An appropriate charge (25% of Atkinson's published product price list) will be made for testing, repairs, replacement and shippingfor returned products which are not defective or found to be defective as the result of improper use, maintenance or neglect.
DESIGN AND SPECIFICATIONS
Atkinson Electronics, Inc. reserves the right to make changes in the design and/or specifications of any product as technologicaladvances or necessity requires.
CUSTOM PRODUCT
In many cases, our products can be calibrated to your custom requirements or slight modifications can be made to meet yourspecifications. Usually the additional charges and lead times are nominal, if any. If a custom product is to be returned, pleasenote that products that are customized for specialty applications are usually not resalable items. For this reason, credit will notnormally be given. Contact your Customer Service Representatives for quotes on your special requirements.
TERMS AND CONDITIONS PRODUCT CATALOG
ATKINSON ELECTRONICS, INC. Phone (801) 262-6400, 1-800-261-360214 West Vine Street, Murray, UT 84107 Fax (801) 261-3796www.atkinsonelectronics.com E-MAIL: [email protected]
LIMITED WARRANTY
Atkinson Electronics, Inc. gives this express warranty (along with extended warranty endorsements, whereapplicable) in lieu of all other warranties, express or implied, including (without limitation), warranties ofmerchantability and fitness for a particular purpose. This constitutes Atkinson Electronics, Inc.'s solewarranty and obligation with regard to our products as well as the Customer's sole remedy.
Atkinson Electronics, Inc. expressly disclaims all liability and responsibility for any special, indirect orconsequential damages or any further loss of any kind whatsoever resulting from the use of our product.The Customer's sole and exclusive remedy and the limit of Atkinson Electronics, Inc.'s liability for any losswhatsoever, shall not exceed the purchase price paid by the Customer for the product to which a claim ismade.
Countries or States that do not allow limitations of incidental or consequential damages or on how long animplied warranty lasts, the above limitations may not apply to you. This warranty gives you specific legalrights and you may also have other rights which vary from State to State or Country to Country.
All products manufactured by Atkinson Electronics, Inc. are warranted to be free from defects in material andworkmanship in accordance with and subject to the following terms and conditions:
1. This warranty is limited to the original customer only. It cannot be transferred or assigned to third partiesunless the intent to transfer to a third party is expressly indicated in a purchase order and/or warrantyprocessing arrangements have been agreed upon in writing by Atkinson Electronics, Inc.
2. Atkinson Electronics, Inc. will correct any defects in material or workmanship which appear within one(1) year from the date of shipment by Atkinson Electronics, Inc. (or its authorized distributors) to theoriginal Customer. Atkinson Electronics, Inc. will repair or replace, at our option, any defective products,provided that our inspection discloses that such defects developed under normal and proper use. Thiswarranty does not extend to goods subjected to misuse, neglect, accident or improper installation, or tomaintenance or repair of products which have been altered or repaired by anyone except AtkinsonElectronics, Inc., unless otherwise stated in writing.
3. An appropriate charge (25% of product list price) will be made for testing, repairs, replacement andshipping for a returned product which is not defective or found to be defective as the result of improperuse, maintenance or neglect.
4. Atkinson Electronics, Inc. will not accept responsibility for any invoiced goods or services that are notcovered by an Atkinson Electronics, Inc. written purchase order. Under no circumstances does AtkinsonElectronics, Inc. agree to pay for labor or other related expenses associated with the troubleshootingand/or repair of our product without prior specific written authorization.
5. Information in our descriptive literature is based on product specifications that are current at the timeof publication. Product specifications, design and descriptive literature are subject to change asimprovements are introduced. Although we announce changes as they occur, we cannot guaranteenotification to every Customer. Atkinson Electronics, Inc. warrants delivered products to conform to themost current specifications, design and descriptive literature.
This warranty policy may be expanded or limited, for particular categories of products or Customers, byinformation sheets published as deemed appropriate by Atkinson Electronics, Inc.
ATKINSON ELECTRONICS, INC.
The leader in customHVAC interfacingproducts for twentyyears
Providing uniquesolutions for theHVAC controlinterface problems oftoday & tomorrow
Atkinson Electronics, Inc. (AEI) was founded in 1976 by Gaylen V.Atkinson as one of the first custom interface manufacturers.
In 1976 AEI focused on custom interface boards for solarinstrumentation and control. In 1980 AEI expanded its focus toinclude HVAC controls and became a control systems distributor.Increased emphasis was given to manufacturing and sales ofelectronic interface boards in 1984. The same year, our first productcatalog was developed and mailed to control contractors around thecountry. The construction of our Murray, Utah facility whichquadrupled manufacturing, engineering and office space wascompleted in 1991.
As both a HVAC control systems distributor and electronic interfacemanufacturer, AEI has provided unique solutions for the electronicinterface problems in the HVAC industry.
AEI remains the leader in design, engineering, and manufacturing ofcontrol interface devices. Throughout our existence, ourcommitment has remained the same...
...to provide our customers withinnovative solutions to their controlsystem problems.