CURRICULUM VITAE SHAHRIL ANUAR BAHARI · CURRICULUM VITAE. SHAHRIL ANUAR BAHARI . ... University of...

CURRICULUM VITAE

SHAHRIL ANUAR BAHARI Lecturer

Address: Bio-Composite Technology Program,

Faculty of Applied Sciences, University of Technology MARA (UiTM) Malaysia,

40450 Shah Alam, Selangor Darul Ehsan, Malaysia

Telephone: 603-55444625 (Office) 6019-3884618 (Mobile)

Facsimile: 603-55444562

E-Mail Address: [email protected]

[email protected]

SHAHRIL ANUAR BAHARI

PERSONAL PARTICULARS

Full Name : Shahril Anuar Bin Bahari Identity Card No. : 770613-08-7171 Date of Birth : 13 June 1977 Place of Birth : Tapah, Perak, Malaysia Nationality : Malaysian Race : Malay Religion : Islam Gender : Male Marital Status : Married Height : 178 cm Weight : 60 kg AREA OF SPECIALIZATION

Science and Engineering of Bio-Composite Materials Research Interests: Mechanical Strength Performance of Bio-Composite Materials Mechanical Strength Performance of Bamboo and Bamboo-Based Composite Materials Development of Binderless Board Products Conversion of Agro-Industrial Wastes into Value Added Products EDUCATION BACKGROUND

M. Sc. (Wood Science and Technology), 2005 University of Technology MARA (UiTM) Malaysia Thesis: Modes of Failure and Microscopic Failures of Betong Bamboo Strips Loaded in Shear,

Bending, Tension and Compression B. Sc. (Furniture Technology), 2002 University of Technology MARA (UiTM) Malaysia Thesis: Strength Properties of Laminated Gigantochloa scortechinii (Semantan Bamboo) Diploma (Mechanical Engineering), 1999 University of Technology MARA (UiTM) Malaysia Final Year Project: Survey on Cumulative Trauma Disorder (CTD) Among Typists in UiTM:

Relationship between Bio-Mechanics and Office Furniture Workstation Design

2


WORKING EXPERIENCE

November 2005 – Present Lecturer Faculty of Applied Sciences

University of Technology MARA (UiTM) Malaysia July 2004 – November 2005 Research Assistant

Institute of Research, Development and Commercialization (IRDC) University of Technology MARA (UiTM) Malaysia

June 2003 – September 2004 Part-Time Tuition Teacher

Mercu Kecemerlangan Tuition Centre and Malkhah Tuition Centre Shah Alam, Malaysia

July – September 2001 Practical Trainee

Guthrie Furniture Sdn. Bhd. Shah Alam, Malaysia

TEACHING EXPERIENCE

I. LECTURES AND LABORATORIES

1. Bio-Composite Technology II (BCT597) Lecture and Laboratory B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia December 2007 – Present

2. Bio-Composite Technology I (BCT567) Lecture and Laboratory B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia June 2007 – Present

3. Strength of Materials (PST541) Laboratory B. Sc. (Hons.) in Material Technology, Faculty of Applied Sciences, UiTM Malaysia January 2007 – Present

4. Structure and Identification of Cellulosic Materials (BCT441) Lecture and Laboratory

3


B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January – May 2007

5. Static and Strength of Materials (BCT421) Laboratory B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia July 2006 – Present

6. Physical and Chemical Properties of Cellulosic Materials (BCT465) Laboratory B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia July – November 2006

7. Furniture Strength and Testing (FUR505)

Lecture and Laboratory B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – Present

8. Wood Composite (FUR265)

Lecture B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – April 2006

9. Furniture Manufacturing II (FUR453)

Lecture and Laboratory B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – Present

II. THESIS SUPERVISION

B. Sc. Research Project (FUR529 and FSG610) A. AS ADVISOR:

1. Kamrie Kamlon

Performance of Recycled Polymer Composite Reinforced with Different Percentage of Rice Husk Flour B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 – Present

4


2. Mohd. Faizal Izwan Salihuddin Performance of Recycled Polymer Composite Reinforced with Different Percentage of Coconut Shell Flour B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 – Present

3. Muhamad Yunus Abd Hamid Effects of Different Resin Types and Environmental Exposures on Compression Perpendicular Loading of Bolted Joint Laminated Bamboo Strips Lumber B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 – Present

4. Muhammad Najmuddin Hashim Effects of Different Resin Types and Environmental Exposures on Compression Parallel Loading of Bolted Joint Laminated Bamboo Strips Lumber B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 - Present

5. Wan Nor Raihan Wan Jaafar Influence of High Frequency Heating and Layer Orientation on Mechanical and Physical Properties of Multi Laminar Bio-Composite Board B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia July 2008 - Present

6. Balkis Fatomer A Bakar Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Agricultural Wastes Particleboard B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia July 2008 - Present

7. Nurul Alyaa Abdul Malek

Effects of Resin Content Levels and Environmental Exposures on Mechanical Strength and Physical Performance of High Density Bamboo Particle Composite Board B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia July 2008 - Present

5


8. Saeid Mubarak Jamalullain Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Coconut Husk Particle B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January – November 2008

9. Mohd Khairi Yahya Bending Strength and Electrical Resistance of Polymer Composite Reinforced With Pineapple Leaves Particle B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January – November 2008

10. Sitiarfah Abu Bakar Mechanical Strength Evaluation on Agro-board for Lightweight Interior Construction B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January – November 2008

11. Mohd Safuan Nadzin Analysis on Mechanical and Physical Properties of Bagasse Board for Building Components B. Sc. (Hons.) in Bio-Composite Technology, Faculty of Applied Sciences, UiTM Malaysia January – November 2008

12. Siti Aidaliza Subardi Mechanical Properties of Binderless Bamboo Fibreboard (BBF) B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia January 2007 – May 2008

13. Tengku Maliana Ku Yusof Effects of Different Resin Types and Resin Content Levels on Strength Properties of Particleboard Made from Petai Belalang (Leucaena leucocephala) B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 –May 2008

14. Hafizah Samsudin Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction

6


B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – June 2007

15. Mohd Ikram Ariffin Effects of Different Resin Types and Resin Content Levels on Mechanical and Physical Properties of Particleboard Made from Semantan Bamboo (Gigantochloa scortechinii) B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – May 2007

16. Mohd Hafiz Musa Effect of Different Pressing Methods and Pressing Times on Springback Properties of Bent Laminated Bamboo Strips Lumber (bLBSL) for Furniture Component B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – December 2006

B. AS CO-ADVISOR:

1. Suzana Ibrahim Influence of Different Treatment and Beating Processes on Strength Properties of Paper from Sugarcane Waste B. Sc. (Hons.) in Environmental Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 - Present

2. Siti Suraya Daud

Strength Properties of Paper from Coconut Husks at Different Ages and Fibre Sizes B. Sc. (Hons.) in Environmental Technology, Faculty of Applied Sciences, UiTM Malaysia January 2009 - Present

3. Munirah Anuar Mechanical Properties of Agricultural Waste Composite Board Reinforced with Textile Fabrics B. Sc. (Hons.) in Textile Technology, Faculty of Applied Sciences, UiTM Malaysia July 2008 - Present

4. Akmal Mohamed Isa Physical and Mechanical Properties of Solid Petai Belalang (Leucaena leucocephala)

7


B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia January 2007 – January 2008

5. Noor Azrieda Abd Rashid A Study on Botanical Characters and Anatomical Features of Kenaf (Hibiscus cannabinus l.) as Future Bio-Composite Material B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – May 2006

6. Nur Hannani Abdul Latif Surface Roughness Evaluation of Bamboo Furniture Components Using Stylus Contact Method B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – May 2006

7. Mohd Esmael Ariff Osman Wahid

Effects of Surface Roughness of Laminated Bamboo Furniture Components on Glueline Performance B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – May 2006

8. Nur Afida Mohd Rafik

Effects of High Frequency Heating on the Bonding Performance of Laminated Bamboo B. Sc. (Hons.) in Furniture Technology, Faculty of Applied Sciences, UiTM Malaysia December 2005 – May 2006

RESEARCH EXPERIENCE

1. Physical and Mechanical Strength Characterization of Hybrid Composite Material from

Fabric-Reinforced Agricultural Waste Particles (Grant: RM20,000) Mohd Iqbal Misnon (Project Leader) & Shahril Anuar Bahari Dana Kecemerlangan UiTM November 2008 – Present

2. Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials (Grant: RM30,000) Shahril Anuar Bahari (Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin Dana Kecemerlangan UiTM May 2008 – Present

8


3. The Analysis of Forest Tree Diseases in Relation to Vegetative Characteristics at Kuala Keniam, Taman Negara, Pahang, Malaysia (Grant: RM60,000) Mansur Ahmad (Project Leader), Mohd Nazip Suratman, Shahril Anuar Bahari & Suriana Rofie@Rafie Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia May 2007 – February 2009

4. Tree Species Diversity of Kuala Keniam, Taman Negara, Pahang, Malaysia (Grant:

RM60,000) Mohd Nazip Suratman (Project Leader), Mazlin Kusin, Mansur Ahmad, Shahril Anuar Bahari, Judith Gisip, Suriana Rofie@Rafie & Azrena Abdul Karim Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia May 2007 – Present

5. Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction (Grant: RM31,000) (Project Code: 600-IRDC/ST/FRGS5/3/1145) Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia October 2006 – Present

6. Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using

Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material (Grant: RM8,000) (Project Code: 600-IRDC/ST/FRGS.5/3/1156) Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia October 2006 – January 2009

7. Utilization of Pioneer Forest Species in the Production of Environmental-Friendly Inorganic Bonded Bio-Composite Panels (Grant: RM40,000) Razali Abdul Kader (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Shahril Anuar Bahari Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia October 2006 – Present

8. Mechanical and Physical Behaviour of Bamboo Particleboard Shahril Anuar Bahari Institute of Research, Development and Commercialization (IRDC), UiTM June 2006 – June 2008

9


UNIVERSITY / FACULTY / EXTENSION SERVICES

1. Vice-Secretary

The Committee of Science and Technology New Area Development Centre for Strategic Planning, UiTM Malaysia May 2008 – Present

2. Member Internal Auditor Committee Faculty of Applied Sciences, UiTM Malaysia February 2008 – Present

3. Evaluator Panel for “Majlis Sanggar Buku” Science and Mathematic Publication Award University Publication Centre (UPENA), UiTM Malaysia January 2008

4. Member and Evaluator Panel The Committee of Conference Proceeding Papers & Products Exhibition National Conference on Forest Products (NCFP) 2008 Forest Research Institute Malaysia (FRIM) and UiTM Malaysia August 2007 – October 2008

5. Member The Committee of Anugerah Kecemerlangan Akademik (AKNC) Faculty of Applied Sciences, UiTM Malaysia July 2007 – Present

6. Member Examination Committee Faculty of Applied Sciences, UiTM Malaysia March 2007 – Present

7. Technical Evaluator Panel Fundamental Research Grant Scheme (FRGS) Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia March 2007

8. Member Program Development Committee Master of Science in Agro-Industrial Forestry (M. Sc. by Coursework) Faculty of Applied Sciences, UiTM Malaysia September 2006 – Present

10


9. Students Academic Advisor B. Sc. (Hons.) in Bio-Composite Technology Faculty of Applied Sciences, UiTM Malaysia July 2006 – Present

10. Students Academic Advisor

B. Sc. (Hons.) in Furniture Technology Faculty of Applied Sciences, UiTM Malaysia January – April 2006

11. Member/Facilitator Program Pembangunan dan Kepimpinan Pelajar (PPKP) Faculty of Applied Sciences, UiTM Malaysia December 2005 – July 2007

12. Students’ Advisor Exhibition Activities Committee for Science and Technology (S & T) Exhibition B. Sc. (Hons.) in Bio-Composite Technology B. Sc. (Hons.) in Furniture Technology Faculty of Applied Sciences, UiTM Malaysia July 2006 and August 2007

13. Member/Part-Time Student Academic Division Certificate Received the certificates in 2005 and 2006: • Certificate in Islamic Study: Syariah Islamiah, 2006 • Certificate in Islamic Study: Pengantar Fiqh, 2005 Sultan Salahuddin Abdul Aziz Shah Mosque, Shah Alam, Malaysia December 2004 – Present

CONSULTANCY

Bio-Diversity Inventory: Documentation on Timber and Non-Wood Forest Products in Sungkai Forest, Malaysia Mohd Nazip Suratman (Leader), Mazlin Kusin, Shahril Anuar Bahari & Suriana Rofie@Rafie Department of Wildlife and National Parks (PERHILITAN) Malaysia February 2007

11


AWARDS & RECOGNITIONS

1. Bronze Medal Award

“Agroboard” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Judith Gisip, Mohd Safuan Nadzin, Nurul Nadiah Mohd Firdaus Hum & Sitiarfah Abu Bakar Invention, Innovation and Design (IID) 2009 Research Management Institute (RMI), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 13 – 15 January 2009

2. Bronze Medal Award “Portabelle” Judith Gisip (Project Leader), Suhaili Mohamad & Shahril Anuar Bahari Invention, Innovation and Design (IID) 2009 Research Management Institute (RMI), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 13 – 15 January 2009

3. Silver Medal Award “Nangka Board: Product Diversification from Agriculture” Rosmas Sarnua, Mohd Nazip Suratman & Shahril Anuar Bahari Invention, Innovation and Design (IID) 2009 Research Management Institute (RMI), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 13 – 15 January 2009

4. Research Project Grant Award (RM 30,000.00) “Evaluation on Mechanical and Physical Properties of Particle-Based Composite Panel Board Made From Agro-Industrial Waste Materials” Shahril Anuar Bahari (Project Leader), Mansur Ahmad & Mohd Ariff Jamaludin UiTM’s Excellence Fund May 2008

5. Bronze Medal Award (Materials Category) “Binderless Bamboo Fibre-Based Composite for Indoor Construction Material” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman Nordin & Mohamad Jani Saad 19th International Invention, Innovation and Technology Exhibition (ITEX) 2008 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 9 – 10 May 2008

6. Gold Medal Award (Building and Construction Materials Category) “Bio-Composite Panel Board Made From Bamboo Particle”

12


Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohamad Jani Saad 36th International Exhibition of Inventions, New Techniques and Products 2008 Swiss Federal Government Geneva Palexpo, Geneva, Switzerland 2 – 6 April 2008

7. Ecology-Friendly Award from International Ecology Fund “Particleboard Made From Bamboo Skin Waste” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad 11th Moscow International Salon of Industrial Property “Archimedes” 2008 Cultural-Exhibition Centre "Sokolniki", Moscow, Russia 1 – 4 April 2008

8. Bronze Medal Award “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh 11th Moscow International Salon of Industrial Property “Archimedes” 2008 Cultural-Exhibition Centre "Sokolniki", Moscow, Russia 1 – 4 April 2008

9. Ecology-Friendly Award from International Ecology Fund “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh 11th Moscow International Salon of Industrial Property “Archimedes” 2008 Cultural-Exhibition Centre "Sokolniki", Moscow, Russia 1 – 4 April 2008

10. Iran Special Award: Diploma of Honour “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh 11th Moscow International Salon of Industrial Property “Archimedes” 2008 Cultural-Exhibition Centre "Sokolniki", Moscow, Russia 1 – 4 April 2008

11. Honour Certificate Federal Service for Intellectual Property, Patent & Trademark “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh 11th Moscow International Salon of Industrial Property “Archimedes” 2008 Cultural-Exhibition Centre "Sokolniki", Moscow, Russia 1 – 4 April 2008

13


12. Gold Medal Award (Invention Category) “Bimboard” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad, Kamarulzaman Nordin & Siti Aidaliza Subardi Inventions, Innovations and Designs (IID) 2008 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 25 – 27 March 2008

13. Silver Medal Award (Invention Category) “Bamper” Shahril Anuar Bahari (Project Leader), Azizi Abd Jalil & Mohd Rozemy Mohamad Ghazali Inventions, Innovations and Designs (IID) 2008 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 25 – 27 March 2008

14. Bronze Medal Award (Invention Category) “Bamboo Scaffolding” Shahril Anuar Bahari (Project Leader), Mohd Nazarudin Zakaria, Mohd Ariff Jamaludin, Mansur Ahmad & Kamarulzaman Nordin Inventions, Innovations and Designs (IID) 2008 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 25 – 27 March 2008

15. Bronze Medal Award (Innovation Category) “Microwave Treated Bamboo – Novel Approach towards Enhancing the Strength Properties of Gigantochloa scortechinii (Semantan) Bamboo” Kamarulzaman Nordin (Project Leader), Othman Sulaiman, Mohd Ariff Jamaludin & Shahril Anuar Bahari Inventions, Innovations and Designs (IID) 2008 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 25 – 27 March 2008

16. Bronze Medal Award (Invention Category) “Lightweight Furniture from Petai Belalang Timber” Judith Gisip (Project Leader), Shahril Anuar Bahari, Akmal Mohamed Isa & Mohamad Ridzuan Samsury Inventions, Innovations and Designs (IID) 2008 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 25 – 27 March 2008

14


17. Bronze Medal Award “Moulded Laminated Bamboo Lumber for Furniture Components” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Hafiz Musa & Mashitah Abu Kassim Malaysia Technology Expo (MTE) 2008 Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia 21 – 23 February 2008

18. Silver Medal Award “Bio-Composite Panel Board Made From Bamboo Particles” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Kamarulzaman Nordin, Mansur Ahmad & Mohd Ikram Ariffin 18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 18 – 20 May 2007

19. Bronze Medal Award “Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load” Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin 18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 18 – 20 May 2007

20. Bronze Medal Award “Bending Strength Properties of Bamboo Strips” Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin 18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 18 – 20 May 2007

21. Silver Medal Award “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin, Tony Boniface & Tuan Fauzi Tuan Soh 18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 18 – 20 May 2007

15


22. Silver Medal Award “Particleboard Made From Bamboo Skin Wastes” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Ariff Jamaludin & Mansur Ahmad 18th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2007 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 18 – 20 May 2007

23. Best Poster Presentation Award “Effect of High Frequency Pressing Method (HFPM) on Springback Behaviour of Bent Laminated Bamboo Strips Lumber (BLBSL)” Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa 3rd Colloquium on Materials, Minerals and Polymers (MAMIP) 2007 School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM) Vistana Hotel, Penang, Malaysia 10 – 11 April 2007

24. Gold Medal Award (Invention Category) “Eezy-Picture Frame” Kamarulzaman Nordin (Project Leader) & Shahril Anuar Bahari Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM, Shah Alam, Malaysia 24 – 25 January 2007

25. Silver Medal Award (Invention Category) “Moulded Laminated Bamboo Lumber for Furniture Components” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Mashitah Abu Kassim Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM, Shah Alam, Malaysia 24 – 25 January 2007

26. Bronze Medal Award (Invention Category)

“Potential of Bamboo as an Alternative Raw Material through Production of Bio-Composite Panel Board for Interior Construction Uses” Shahril Anuar Bahari (Project Leader), Mohd Ikram Ariffin, Mansur Ahmad & Kamarulzaman Nordin Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 24 – 25 January 2007

16


27. Bronze Medal Award (Innovation Category) “Model of Macroscopic and Microscopic Failures of Malaysian Bamboo Species under Mechanical Load” Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 24 – 25 January 2007

28. Bronze Medal Award (Innovation Category) “Effect of Culm Height Levels and Node Presence on Maximum Bending Stress of Semantan Bamboo (Gigantochloa Scortechinii) Strips” Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 24 – 25 January 2007

29. Bronze Medal Award (Invention Category) “Particleboard Made From Bamboo Skin Wastes” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mansur Ahmad & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 24 – 25 January 2007

30. Bronze Medal Award (Invention Category) “Five Layer Sandwiched Bamboo Particleboard” Mohd Ariff Jamaludin (Project Leader), Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi Tuan Soh Inventions, Innovations and Designs (IID) 2007 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 24 – 25 January 2007

31. Consolation Prize for Best Thesis Award “Modes of Failure and Microscopic Failures of Betong Bamboo Strips Loaded in Shear, Bending, Tension and Compression” Shahril Anuar Bahari FRIM’s Awards Day and 21st Anniversary Forest Research Institute Malaysia (FRIM) Dewan Perdana Felda, Kuala Lumpur, Malaysia 16 November 2006

17


32. Research Project Grant Award (RM 31,000.00) “Mechanical Properties of Laminated Bamboo Strips Lumber (LBSL) as a Linear Framing Material for Small Construction” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin & Mansur Ahmad Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia October 2006

33. Research Project Grant Award (RM 8,000.00)

“Strength and Performance Properties of Environmental-Friendly Sandwich Panel Using Binderless Bamboo Medium Density Fiberboard (bBMDF) as Core Material” Shahril Anuar Bahari (Project Leader), Mohd Ariff Jamaludin, Mansur Ahmad & Azrena Abdul Karim Fundamental Research Grant Scheme (FRGS) Ministry of Higher Education Malaysia October 2006

34. Gold Medal Award “Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin The British Invention Show 2006 Alexandra Palace, London, UK 18 – 21 October 2006

35. Silver Medal Award “Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin 17th International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX) 2006 Kuala Lumpur Convention Centre (KLCC), Kuala Lumpur, Malaysia 19 – 21 May 2006

36. Silver Medal Award (Invention Category) “Environmental Friendly Sandwich Panel Using Bamboo Skin Wastes As Core Material” Kamarulzaman Nordin (Project Leader), Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2006 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 19 – 20 January 2006

37. Bronze Medal Award (Innovation Category)

“Failure Properties of Betong Bamboo Strips Loaded in Bending”

18


Shahril Anuar Bahari (Project Leader), Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff Jamaludin Inventions, Innovations and Designs (IID) 2006 Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia Sri Budiman Hall, UiTM Malaysia 19 – 20 January 2006

38. Bronze Medal Award

“New Concept Modular Console Table” Kamarulzaman Nordin (Project Leader), Zainal Ripin, Mohd Ariff Jamaludin, Mansur Ahmad, Shahril Anuar Bahari & Mohd Nazarudin Zakaria IPTA Research and Development Exhibition 2005 Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia 19 – 21 May 2005

PUBLICATIONS

I. BOOK

Judith Gisip, Shahril Anuar Bahari, Kamarulzaman Nordin & Azrena Abdul Karim. (2007). Laboratory manual on experiments of anatomical, physical and mechanical properties of wood. Published by University Publication Centre (UPENA), Universiti Teknologi MARA (UiTM). ISBN 978 983 3644 830.

II. JOURNALS

1. Shahril Anuar Bahari, Mansur Ahmad, Kamarulzaman Nordin & Mohd Ariff

Jamaludin. Tensile mechanics of bamboo strips. American Institute of Physics. In review.


Jamaludin. Analysis on strength behaviour of malaysian bamboo species. American Institute of Physics. In review.

3. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi

Tuan Soh. The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. American Institute of Physics. In review.

4. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur

Ahmad. The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). American Institute of Physics. In review.

19


5. Shahril Anuar Bahari & Mansur Ahmad. Effect of culm height levels and node presence on mechanical properties and fracture modes of gigantochloa scortechinii strips loaded in shear parallel to grain. Bamboo Science and Culture. The Journal of American Bamboo Society, USA. In review.

6. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd

Ariff Jamaludin. (2007). Environmental friendly sandwich panel using bamboo skin wastes as core material. Journal of Key Engineering Materials. Vol. 334 – 335. Advances in Composite Materials and Structures. Trans Tech Publication, Switzerland. ISBN-13 978-087849-427-9. Pp. 41 – 44.

III. PROCEEDINGS

1. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Siti Aidaliza

Subardi, Mohamad Jani Saad & Kamarulzaman Nordin. (2008). Characterization on bending strength of binderless bamboo fibreboard (bbf). Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 238 – 246.

2. Mohd Ariff Jamaludin, Shahril Anuar Bahari & Kamarulzaman Nordin. (2008).

Sandwiched bagasse particleboard as a lightweight material for the furniture and building construction industries. Proceeding of 9th Pacific Rim Bio-Based Composites Symposium 2008. Published by Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) and Scion New Zealand. Pp. 203 – 207.

3. Shahril Anuar Bahari, Mansur Ahmad, Mohd Ariff Jamaludin, Kamarulzaman

Nordin & Mohd Ikram Ariffin. (2007). Potential of bamboo as an alternative raw material through production of bio-composite panelboard for light weight interior construction uses. Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 319 – 326.

4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Kamarulzaman

Nordin & Hafizah Samsudin. (2007). Laminated bamboo strip lumber (lbsl). Proceeding of International Panel Products Symposium 2007 (IPPS 2007). Published by The Biocomposite Centre, Bangor University, United Kingdom. ISBN 978-1-84220-097-1. Pp. 327 – 332.

5. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff

Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 107 – 109.

20


6. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Proceeding of the 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-04-0. Pp. 248 – 250.

7. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2006). Failure behaviour of

betong bamboo strips loaded in shear. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 173 – 179.

8. S. A. Bahari, K. Nordin, R. Wahab, M. Ahmad & M. A. Jamaludin. (2006).

Compression strength properties of laminated bamboo lumber (lbl) for small construction applications. Findings of the Young Researchers on Applied Science 2006 (CAS 2006). Vol. 1, Physics and Material Science. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 983-3643-17-5. Pp. 247 – 249.

9. Bahari, S. A. & Ahmad, M. (2005). Modes of failure and strength properties of

dendrocalamus asper (buluh betong) loaded in tension. Proceeding of 3rd USM-JIRCAS Japan Joint International Symposium: Lignocellulose; Materials for the Future from the Tropics. JIRCAS Japan Working Report No. 39. ISSN 1341-710x. Pp. 277 - 280.

10. Bahari, S. A., Ahmad, M. & Jamaludin, M. A. (2004). Microscopic failure of

dendrocalamus asper (buluh betong) loaded in tension. Proceeding of Seminar Kebangsaan Sains Teknologi dan Sains Sosial (STSS) 2004. Jilid 1: Sains Teknologi. ISBN 983-40671-6-x. Pp. 400 - 405.

11. Shahril Anuar Bahari & Mansur Ahmad. (2004). Failure modes and strength

behaviour of dendrocalamus asper (buloh betong) loaded in tension. Conference on Scientific and Social Research (CSSR) 2004, Kuching, Sarawak. 19-21 May 2004.

IV. RESEARCH ABSTRACT IN CONFERENCES

1. Shahril Anuar Bahari, Tengku Maliana Ku Yusof, Judith Gisip & Mohd Ariff Jamaludin. (2008). Characterization on strength behaviour of single-layer particleboard from leucaena leucocephala. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).

2. Judith Gisip, Shahril Anuar Bahari, Ridzuan Samsury & Akmal Mohamed Isa.

(2008). Petai belalang composite panel board as a potential material for furniture

21


components. Research Abstract. National Conference on Forest Products 2008 (NCFP 2008). Published by Forest Research Institute Malaysia (FRIM).

3. S. A. Bahari, M. A. Jamaludin, M. Ahmad, K. Nordin & M. J. Saad. (2008).

Characterization on mechanical and physical behaviour of natural particle-based composite material made from gigantochloa scortechinii. Research Abstract. 2nd International Conference on Functional Materials and Devices 2008 (ICFMD 2008). Published by Faculty of Applied Sciences UiTM Malaysia and Institute of Materials Malaysia (IMM).

4. Shahril Anuar Bahari, Mohd Ariff Jamaludin, Mansur Ahmad, Mohamad Jani Saad,

Kamarulzaman Nordin & Siti Aidaliza Subardi. (2008). Binderless bamboo fibreboard: a preliminary study. Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).

5. Shahril Anuar Bahari, Mohamad Jani Saad, Mohd Ariff Jamaludin, Mansur Ahmad,

Kamarulzaman Nordin & Mohd Ikram Ariffin. (2008). Effects of different resin types and resin content levels on mechanical and physical properties of particleboard made from semantan bamboo (gigantochloa scortechinii). Research Abstract. Rattan and Bamboo Seminar 2008. Published by Forest Research Institute Malaysia (FRIM).

6. Shahril Anuar B., Mohd Ariff J., Mansur A., Kamarulzaman N. & Tony B. (2007).

Mechanical properties of laminated bamboo strips lumber (lbsl) in comparison to solid rubberwood. Research Abstract. Conference on Forestry and Forest Products Research 2007 (CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.

7. Shahril Anuar B., Mansur A., Mohd Ariff J., Mohamad Jani S., Kamarulzaman N. &

Mohd Ikram A. (2007). Effect of resin content levels on mechanical and physical properties of single-layered bamboo particleboard. Research Abstract. Conference on Forestry and Forest Products Research 2007 (CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 82.

8. Mohd Ariff J., Kamarulzaman N., Shahril Anuar B. & Abdul Hamid S. (2007).

Bending characteristics and stress concentration of laminated-veneer-lumber (lvl) from oil palm trunk (opt). Research Abstract. Conference on Forestry and Forest Products Research 2007 (CFFPR 2007). Published by Forest Research Institute Malaysia (FRIM). Pp. 43.

9. Shahril Anuar B., Mohd Nazip S., Mazlin K. & Suriana R. (2007). Study on non-

timber products in sungkai forest, perak. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 44.

10. Mohd Nazip S., Mazlin K., Shahril Anuar B., Suriana R., Sheikh Abdul Karim Y.,

Nurul Nadiah M. F. H. & Aishah B. (2007). A preliminary study of tree species

22


composition in sungkai forest. Research Abstract. Seminar Biodiversiti Kebangsaan 2007. Published by Department of Wildlife and National Parks (PERHILITAN) Malaysia. Pp. 20.

11. S. A. Bahari, M. Ahmad, K. Nordin & M. A. Jamaludin. (2007). Tensile mechanics

of bamboo strips. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 101.


Jamaludin. (2007). Analysis on strength behaviour of malaysian bamboo species. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 225.

13. Mohd Ariff Jamaludin, Shahril Anuar Bahari, Kamarulzaman Nordin & Tuan Fauzi

Tuan Soh. (2007). The bending strength, internal bonding and thickness swelling of multilayer sandwiched bamboo particleboard. International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 227.

14. Mohd Ariff Jamaludin, Kamarulzaman Nordin, Shahril Anuar Bahari & Mansur

Ahmad. (2007). The effect of veneer layers on the bending shear strength and delamination of laminated veneer lumber (lvl) from oil palm trunk (opt). International Conference on Advancement of Materials and Nanotechnology (ICAMN 2007). Materials and Devices: Innovative Research into the 21st Century. Published by University Publication Centre (UPENA) Universiti Teknologi MARA (UiTM). ISBN 978-983-3644-95-7. Pp. 113.

15. Shahril Anuar Bahari, Tony Boniface, Kamarulzaman Nordin, Mohd Ariff

Jamaludin & Mohd Hafiz Musa. (2007). Analysis on springback percentage (sp) of bent laminated bamboo strips lumber (blbsl) using different pressing methods. Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 51.

16. Shahril Anuar Bahari, Kamarulzaman Nordin, Mohd Ariff Jamaludin, Tony

Boniface & Mohd Hafiz Musa. (2007). Effect of high frequency pressing method (hfpm) on springback behaviour of bent laminated bamboo strips lumber (blbsl). Research Abstract. 3rd Colloquium on Materials, Minerals and Polymer 2007 (MAMIP 2007). Published by School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia (USM). ISBN 978-983-3986-03-3. Pp. 78.

23


24

17. Kamarulzaman Nordin, Shahril Anuar Bahari, Mohd Nazarudin Zakaria & Mohd Ariff Jamaludin. (2006). Environmental friendly sandwich panel using bamboo skin wastes as core material. 5th Asian-Australasian Conference on Composite Materials (ACCM-5), 27-30 November 2006, Hong Kong.

18. Ahmad, M., Bahari, S. A. and Jamaludin, M. A. (2005). Failure modes and

microscopic failures of bamboo strips (dendrocalamus asper) loaded in tension and compression. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 144.

19. Nordin, K., Wahab, R., Jamaludin, M. A., Bahari, S. A. and Zakaria, M. N. (2005).

Strength properties of glued-laminated bamboo strips for furniture. Research Abstract. The International Forestry Review. Vol. 7 (5). Forest in the Balance: Linking Tradition and Tradition. XXII IUFRO World Congress, 8 – 13 August 2005, Brisbane, Australia. Published by Commonwealth Forestry Association. ISSN 1465 5489. Pp. 128.

V. TECHNICAL REPORT

1. Shahril Anuar Bahari. (2008). Mechanical and physical behaviour of bamboo particleboard. Research Project Report. Institute of Research, Development and Commercialization (IRDC), UiTM Malaysia.

2. N. Kamarulzaman, W. Razak, J. Mohd Ariff, B. Shahril Anuar & Z. Mohd

Nazarudin. (2005). Strength properties of glued-laminated bamboo strips for furniture. Using wood composites as a tool for sustainable forestry. Gen. Tech. Rep. FPL-GTR-163. Madison, Wisconsin. U. S. Department of Agriculture, Forest Service, Forest Products Laboratory, USA. Pp. 83 – 85.

PROFESSIONAL MEMBERSHIPS

1. Member Malaysian Association of Creativity and Innovation (MACRI) April 2009 - Present

2. Member

Society of Wood Science and Technology (SWST) February 2009 – Present

3. Member Forest Products Society (FPS) February 2009 – Present

CURRICULUM VITAE SHAHRIL ANUAR BAHARI · CURRICULUM VITAE. SHAHRIL ANUAR BAHARI . ... University of...

Documents

Transcript of CURRICULUM VITAE SHAHRIL ANUAR BAHARI · CURRICULUM VITAE. SHAHRIL ANUAR BAHARI . ... University of...