CURRICULUM VITAE...Scientific Head and Founding Member of the “Master Programme of Quality...
Transcript of CURRICULUM VITAE...Scientific Head and Founding Member of the “Master Programme of Quality...
1 Prof Mohamed Aichouni ASME SQC KAQA
CURRICULUM VITAE
Professor Mohamed AICHOUNI
Education Qualifications
PhD in Mechanical and Aeronautical Engineering 1992 The Aeronautical and Mechanical
Engineering Department University of Salford Manchester The United Kingdom
English Language Test Specifications 1988 Joint Program between Cambridge University and
the University of Oran Algeria under the Auspices of the British Council
BSc in Marine Engineering Major Mechanical Equipments (with high Distinction) 1987
Department of Marine Engineering University of Science and Technology of Oran Algeria
Professional Experience
1 ndash Academic
Professor (Sept 2012 ndash Present) Industrial Engineering Department College of Engineering
Hail University Saudi Arabia Associate Professor (Sept 2009 ndash Aug 2012) Mechanical
Engineering Department
Assistant Professor (Sept 2001 ndash Aug 2009) the Mechanical Engineering Department Hail
College of Technology Saudi Arabia
Associate Professor (May 1996 ndash Aug 2001) Faculty of Sciences and Engineering University of
Mostaganem Algeria Nominated and approved for the position of Professor in Mechanical
Engineering by the Scientific Committees of the Department of Mechanical Engineering the
Engineering College and the University Council on June 2001 Assistant Professor (Sept 1992-
April 1996) Faculty of Sciences and Engineering University of Mostaganem Algeria
Part time Laboratory Demonstrator (1988 ndash 1992) Aeronautical and Thermo-Fluids
laboratories The Aeronautical and Mechanical Engineering Department University of Salford
The United Kingdom
Taught Courses
(1) Under-Graduate level (Mechanical Engineering and Industrial Engineering Departments)
Quality in Manufacturing Quality Control and Industrial Statistics Probability and Statistics for
Engineers Industrial Metrology Manufacturing Systems Dynamics Fluid Mechanics Thermodynamics
and Heat Transfer
(2) Post-graduate level
Master of Quality Engineering and Management (Hail University 2015-2016)
Total Quality Management Organisationnel Excellence
2 Prof Mohamed Aichouni ASME SQC KAQA
Master of Applied Thermo-Fluids Engineering (Mostaganem University 2008-2010)
Computational Fluid Dynamics Experimental Fluid Dynamics Heat and Mass Transfer and
Environmental Engineering
The e-Learning approach has been successfully adopted through the effective activation of the
three components of World Class Higher Education Model (Teaching-Research-Community
Services) to design and deliver online courses for
Probability and Statistics for Engineers (httpfacultyuohedusamaichounistat319 )
Dynamics (httpfacultyuohedusamaichounime201 )
Introduction to Engineering (httpfacultyuohedusamaichouniprep004 )
Quality Control (httphctmetrologytripodcomquality)
Metrology (httphctmetrologytripodcom)
Manufacturing Systems (httphctmanufacturingtripodcom) and
These e-courses are classified by the Google search engine among the first sites out of millions of
sites on the net
2 - Research Experience
Scientific Head and Founding Member of the ldquoMaster Programme of Quality Engineering
and Managementrdquo at the College of Engineering Hail University (2015-Present)
Principal Investigator and a Founding Member of bdquoExpertise and Consultancy Office on
Total Quality Management and Business Excellence at the University of Hail
Principal Investigator and Founding Member of bdquoThe Mualeem Mohammad BinLadin
Research Chair on Quality and Productivity Improvement in the Construction Industryrdquo at the
University of Hail Funded by Saudi BinLadin Constructions Group (May 2010 ndash May 2015)
Fund = 5 Million Riyals httpwwwuohedusaResearch-SecretariatList-of-ChairsQICRCAboutPagesWordaspx0
Lead Member of the Research Program for Creativity and Innovation Skills Development
through Quality and Organizational Excellence Concepts funded by the Ministry of
Education Saudi Arabia for two (02) Years Starting Oct 2014 Fund = 988000 SR
Co-Investigator Member of a KACST Research Project (NSTIP National Strategy for
Technology and Innovation Program) Zero Energy home for the Saudi Climate 2 years
(2014-2016) Project Code 13-ENE381-58 SR 1780600
Principal Investigator (PI) of a Research Project Computational Study of the Performance of
Flow Conditioners used in the Oil and Gas Industry University of Hail Scientific Research
Deanship 2016 SR60000
Principal Investigator (PI) Quality Management Systems in the Saudi Construction Industry ndash
A Field study in Hail Region University of Hail Scientific Research Deanship (Code
E11ME) 62012-52013 SR85000
Principal Investigator (PI) Industrial Metrology in the Perspective of the international Quality
Management Standards ISO 9000 University of Hail Scientific Research Deanship (Code
E11MEBOOK) 62012-52013 SR50000
Co-Investigator in a research project Developing Hands-on Team Based Lean Six Sigma
Manufacturing Experiments for the Students of Industrial Engineering at the University of
Hail University of Hail Scientific Research Deanship Code E26IC SR77000
Co-Investigator in a research project led by Dr Wan Yusuf Total Quality Management
Systems in the Saudi Manufacturing Industry University of Hail Scientific Research
Deanship SR50000
Member of the Scientific and Organization Committees of the 3rd
Forum on Total Quality in
Public Security 24-26 February 2014 Organized jointly by the Patrols Police Department and the
3 Prof Mohamed Aichouni ASME SQC KAQA
University of Hail Received an appreciation letter from the Director of the National General
Security
Member of the Scientific and Organization Committees of the 4th
National Quality
Conference 3-6 February 2013 Organized jointly by the University of Hail and the Saudi
Standards Organization (SASO) Received an appreciation letter from the Governor of SASO
Chairman of the Scientific Committee of the TQM and Business Excellence in Government
Services Workshop organized by the University of Hail with the Collaboration of the Saudi
Organization for Standards and Quality (SASO) and the Saudi Quality Council on 17th
of May
2010 (httpfacultyuohedusamaichounitqm2010)
Member of a Research Group at King Abdul-Aziz City of Sciences and Technology working
on a project (KACST-N 138-28) with the aim to develop the Strategic Plan for the National
Quality Centre (January 2007-Dec 2007)
Principal Researcher and Leader of Externally Funded Research Projects in the areas of
flow metering flow conditioning drag reduction in pipelines and pipe networks The research
projects were funded by the National Agency of Scientific Research Development (ANDRU-
Algeria) (1992-2001)
External Examiner of more than 30 MSc and PhD theses and 50 BSc Projects
Reviewer in International Journals (The ASME Journal of Fluids Engineering European
Journal of Engineering Education the Journal of Thermoplastic Composite Materials and
Academy Proceedings in Engineering Science)
Scientific head of a Master programme in the area of Applied Thermo-Fluid Engineering
19992001 at the University of Mostaganem (All students have discussed their theses)
Research interests
My current research interests include
Creativity and Innovation Management Total Quality Management Organizational
Excellence Models Quality Improvement in the Construction Industry Quality Improvement in
Government Services Quality in Engineering Education Quality Control Statistical Process
Control and Quality in Services and Manufacturing
Industrial Metrology and Manufacturing Systems
Experimental and Computational Fluid Dynamics Techniques and their applications to
industrial fluid flow Flow metering and flow conditioning systems
Mathematical and Numerical Modelling of Physical Phenomena
Web based Engineering Education (e-Learning) Curriculum Development
Post-Graduate Theses Supervised
05 MSc 2 PhD Theses in areas of Industrial metrology and fluid flow metering
PhD (Awadh Al-Harbi 2016) at UTM Malaysia in Area of business excellence in RampD
Saudi Organizations
Currently 1 PhD is being prepared under my supervision at the University of Sciences and
Technology in Algiers Subject Water Quality assessment in lakes (2015-present)
3 - Administrative Experience
Vice Rector of the University of Mostaganem (Algeria) (1994 ndash 2001)
In charge of Post Graduate Studies Scientific Research and External Relations
Consultancy Advisor for the Vice Rector for Academic Development and Community
Services Hail University (Nov 2010 ndash Present)
4 Prof Mohamed Aichouni ASME SQC KAQA
Vice Dean for Post-Graduate Studies and Scientific Research Engineering College Hail
University (Sept 2016-Present)
Vice Dean for Academic Affairs Engineering College Hail University (June 2013 ndash Sept
2016)
Chairman Industrial Engineering Department Engineering College Hail University (May 2012
ndash June 2013)
Member of the Executive Committee for Cheikh Ali Joumaia Centre for Training and
Community Services Hail University (Sept 2010 ndash 2011)
General Supervisor of the Council of Technical Education and Vocational Training at the
Region of Hail (February 2005 ndash January 2007)
Quality Director Hail College of Technology (February 2005 ndash January 2007)
Chairman of The Mechanical Technology Department Hail College of Technology
(Saudi Arabia) (August 2006 ndashAug 2009)
4 - Community Services
Expert Member and Advisor in projects to develop strategic plans for charity and non-
governmental organizations (King Abdul-Aziz Foundation for Social Services- Hail Charity
Organization for Koran Tahfidh in Riyadh Hail Orphans Charity Association (2008-Present)
Quality Consultant and Member of the Expertise and Consultancy Permanent Committee at
Dr Nacer Al-Rashid Orphanage Centre I Assisted the Orphanage to build a quality system and to
get the ISO 90012008 Certificate (Jan-June 2013)
Main Organizer of Engineering Students Quality Awareness Programs (competitions
trainings seminars) at the University of Hail during the World Quality Day (second Thursday of
November) and the World Metrology Day (20 May)
Quality Consultant for the project to implement the Total Quality Management Strategy at Hail
Police (2007-2009) This project received high distinction from the Police National Leadership
Responsible for Designing several Executive Educational and Training Programs and
Syllabus in contemporary topics of interest to senior management such as Quality
Management Quality Improvement Industrial Maintenance Mechatronics (at the TVTC
and King Abdul-Aziz City of Sciences and Technology)
Responsible for developing and delivering Industrial Training programs on Quality
Management Statistical Process Control Metrology Information Technologies These
training programs were delivered to Governmental Bodies and Industrial organizations
Active Member of the Saudi Quality Council since 2009 Expert Member with the Higher
Education Quality Section (Sept 2013-Present)
Founder Member of the Saudi Quality Association ndash Hail`s section April 2016
Honours Awards Affiliations Membership
IRCA Registered Auditor in QMS ISO 90012015
Certified Assessor at the King Abdul-Aziz Quality Award (KAQA) and Al-Subaie Excellence in
Charity Organizations Award
Member of Curriculum Development Team working on the syllabus of Quality Technician
Degree at the TVTC (2007-2008)
Member of the Arab Institute of Operations and Maintenance(2005-2006)
Member of the National Committee for the evaluation of research projects Ministry of Higher
Education and Scientific Research Algeria (1996-2001)
Member of the National Working Group on Metrology Ministry of Industry and the National
Organisation of Legal Metrology ONML Algeria (2000-Present)
5 Prof Mohamed Aichouni ASME SQC KAQA
Associate Member of the American Society of Mechanical Engineers ASME (1990-1994)
PhD Fellowship Under the British and the Algerian Governments technical co-operation program
(1988-1992)
Supervisor of the Metrology Section at the Technical Discussion Forum (wwwtknenetvb) and
the Quality Control Section at the Arabic Statistician Discussion Forum
(wwwarabicstatcomboard)
Other Certificates Awarded and Advanced Courses Attended
IRCA training course for Registered Auditors in Quality Management System ISO 90012015
King Abdul-Aziz Quality Award Training courses held by Saudi Arabian Standards Organisation
(SASO) in Al-Khobar and Riyadh (2008)
Training courses (20hours) on AutoCAD Machining and Metal Forming held at Hail College of
Technology (2007)
Computational Fluid Dynamics (CFD) Workshop held at the Imperial College of London 1991
Industrial Flow Metering Course held at the National Engineering Laboratory East Kilbridge
UK 1991
Fluid Flow and Heat transfer modelling workshop held in UMIST The United Kingdom 1990
Advanced Computational Fluid Dynamics Course held at UMIST The United Kingdom 1989
Other Skills
Computer Packages Minitab17 Edraw Microsoft Office (Word Excel Access FrontPage
Visio MindJet)
Languages Fluent in Arabic English and French
Contacts
Current Address University of Hail College of Engineering PO Box 2440 Hail 81441
Saudi Arabia Mobile 00966- 508968402
Email maichouniuohedusa m_aichouniyahoocouk
Web site cuttusmaichouni
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
2 Prof Mohamed Aichouni ASME SQC KAQA
Master of Applied Thermo-Fluids Engineering (Mostaganem University 2008-2010)
Computational Fluid Dynamics Experimental Fluid Dynamics Heat and Mass Transfer and
Environmental Engineering
The e-Learning approach has been successfully adopted through the effective activation of the
three components of World Class Higher Education Model (Teaching-Research-Community
Services) to design and deliver online courses for
Probability and Statistics for Engineers (httpfacultyuohedusamaichounistat319 )
Dynamics (httpfacultyuohedusamaichounime201 )
Introduction to Engineering (httpfacultyuohedusamaichouniprep004 )
Quality Control (httphctmetrologytripodcomquality)
Metrology (httphctmetrologytripodcom)
Manufacturing Systems (httphctmanufacturingtripodcom) and
These e-courses are classified by the Google search engine among the first sites out of millions of
sites on the net
2 - Research Experience
Scientific Head and Founding Member of the ldquoMaster Programme of Quality Engineering
and Managementrdquo at the College of Engineering Hail University (2015-Present)
Principal Investigator and a Founding Member of bdquoExpertise and Consultancy Office on
Total Quality Management and Business Excellence at the University of Hail
Principal Investigator and Founding Member of bdquoThe Mualeem Mohammad BinLadin
Research Chair on Quality and Productivity Improvement in the Construction Industryrdquo at the
University of Hail Funded by Saudi BinLadin Constructions Group (May 2010 ndash May 2015)
Fund = 5 Million Riyals httpwwwuohedusaResearch-SecretariatList-of-ChairsQICRCAboutPagesWordaspx0
Lead Member of the Research Program for Creativity and Innovation Skills Development
through Quality and Organizational Excellence Concepts funded by the Ministry of
Education Saudi Arabia for two (02) Years Starting Oct 2014 Fund = 988000 SR
Co-Investigator Member of a KACST Research Project (NSTIP National Strategy for
Technology and Innovation Program) Zero Energy home for the Saudi Climate 2 years
(2014-2016) Project Code 13-ENE381-58 SR 1780600
Principal Investigator (PI) of a Research Project Computational Study of the Performance of
Flow Conditioners used in the Oil and Gas Industry University of Hail Scientific Research
Deanship 2016 SR60000
Principal Investigator (PI) Quality Management Systems in the Saudi Construction Industry ndash
A Field study in Hail Region University of Hail Scientific Research Deanship (Code
E11ME) 62012-52013 SR85000
Principal Investigator (PI) Industrial Metrology in the Perspective of the international Quality
Management Standards ISO 9000 University of Hail Scientific Research Deanship (Code
E11MEBOOK) 62012-52013 SR50000
Co-Investigator in a research project Developing Hands-on Team Based Lean Six Sigma
Manufacturing Experiments for the Students of Industrial Engineering at the University of
Hail University of Hail Scientific Research Deanship Code E26IC SR77000
Co-Investigator in a research project led by Dr Wan Yusuf Total Quality Management
Systems in the Saudi Manufacturing Industry University of Hail Scientific Research
Deanship SR50000
Member of the Scientific and Organization Committees of the 3rd
Forum on Total Quality in
Public Security 24-26 February 2014 Organized jointly by the Patrols Police Department and the
3 Prof Mohamed Aichouni ASME SQC KAQA
University of Hail Received an appreciation letter from the Director of the National General
Security
Member of the Scientific and Organization Committees of the 4th
National Quality
Conference 3-6 February 2013 Organized jointly by the University of Hail and the Saudi
Standards Organization (SASO) Received an appreciation letter from the Governor of SASO
Chairman of the Scientific Committee of the TQM and Business Excellence in Government
Services Workshop organized by the University of Hail with the Collaboration of the Saudi
Organization for Standards and Quality (SASO) and the Saudi Quality Council on 17th
of May
2010 (httpfacultyuohedusamaichounitqm2010)
Member of a Research Group at King Abdul-Aziz City of Sciences and Technology working
on a project (KACST-N 138-28) with the aim to develop the Strategic Plan for the National
Quality Centre (January 2007-Dec 2007)
Principal Researcher and Leader of Externally Funded Research Projects in the areas of
flow metering flow conditioning drag reduction in pipelines and pipe networks The research
projects were funded by the National Agency of Scientific Research Development (ANDRU-
Algeria) (1992-2001)
External Examiner of more than 30 MSc and PhD theses and 50 BSc Projects
Reviewer in International Journals (The ASME Journal of Fluids Engineering European
Journal of Engineering Education the Journal of Thermoplastic Composite Materials and
Academy Proceedings in Engineering Science)
Scientific head of a Master programme in the area of Applied Thermo-Fluid Engineering
19992001 at the University of Mostaganem (All students have discussed their theses)
Research interests
My current research interests include
Creativity and Innovation Management Total Quality Management Organizational
Excellence Models Quality Improvement in the Construction Industry Quality Improvement in
Government Services Quality in Engineering Education Quality Control Statistical Process
Control and Quality in Services and Manufacturing
Industrial Metrology and Manufacturing Systems
Experimental and Computational Fluid Dynamics Techniques and their applications to
industrial fluid flow Flow metering and flow conditioning systems
Mathematical and Numerical Modelling of Physical Phenomena
Web based Engineering Education (e-Learning) Curriculum Development
Post-Graduate Theses Supervised
05 MSc 2 PhD Theses in areas of Industrial metrology and fluid flow metering
PhD (Awadh Al-Harbi 2016) at UTM Malaysia in Area of business excellence in RampD
Saudi Organizations
Currently 1 PhD is being prepared under my supervision at the University of Sciences and
Technology in Algiers Subject Water Quality assessment in lakes (2015-present)
3 - Administrative Experience
Vice Rector of the University of Mostaganem (Algeria) (1994 ndash 2001)
In charge of Post Graduate Studies Scientific Research and External Relations
Consultancy Advisor for the Vice Rector for Academic Development and Community
Services Hail University (Nov 2010 ndash Present)
4 Prof Mohamed Aichouni ASME SQC KAQA
Vice Dean for Post-Graduate Studies and Scientific Research Engineering College Hail
University (Sept 2016-Present)
Vice Dean for Academic Affairs Engineering College Hail University (June 2013 ndash Sept
2016)
Chairman Industrial Engineering Department Engineering College Hail University (May 2012
ndash June 2013)
Member of the Executive Committee for Cheikh Ali Joumaia Centre for Training and
Community Services Hail University (Sept 2010 ndash 2011)
General Supervisor of the Council of Technical Education and Vocational Training at the
Region of Hail (February 2005 ndash January 2007)
Quality Director Hail College of Technology (February 2005 ndash January 2007)
Chairman of The Mechanical Technology Department Hail College of Technology
(Saudi Arabia) (August 2006 ndashAug 2009)
4 - Community Services
Expert Member and Advisor in projects to develop strategic plans for charity and non-
governmental organizations (King Abdul-Aziz Foundation for Social Services- Hail Charity
Organization for Koran Tahfidh in Riyadh Hail Orphans Charity Association (2008-Present)
Quality Consultant and Member of the Expertise and Consultancy Permanent Committee at
Dr Nacer Al-Rashid Orphanage Centre I Assisted the Orphanage to build a quality system and to
get the ISO 90012008 Certificate (Jan-June 2013)
Main Organizer of Engineering Students Quality Awareness Programs (competitions
trainings seminars) at the University of Hail during the World Quality Day (second Thursday of
November) and the World Metrology Day (20 May)
Quality Consultant for the project to implement the Total Quality Management Strategy at Hail
Police (2007-2009) This project received high distinction from the Police National Leadership
Responsible for Designing several Executive Educational and Training Programs and
Syllabus in contemporary topics of interest to senior management such as Quality
Management Quality Improvement Industrial Maintenance Mechatronics (at the TVTC
and King Abdul-Aziz City of Sciences and Technology)
Responsible for developing and delivering Industrial Training programs on Quality
Management Statistical Process Control Metrology Information Technologies These
training programs were delivered to Governmental Bodies and Industrial organizations
Active Member of the Saudi Quality Council since 2009 Expert Member with the Higher
Education Quality Section (Sept 2013-Present)
Founder Member of the Saudi Quality Association ndash Hail`s section April 2016
Honours Awards Affiliations Membership
IRCA Registered Auditor in QMS ISO 90012015
Certified Assessor at the King Abdul-Aziz Quality Award (KAQA) and Al-Subaie Excellence in
Charity Organizations Award
Member of Curriculum Development Team working on the syllabus of Quality Technician
Degree at the TVTC (2007-2008)
Member of the Arab Institute of Operations and Maintenance(2005-2006)
Member of the National Committee for the evaluation of research projects Ministry of Higher
Education and Scientific Research Algeria (1996-2001)
Member of the National Working Group on Metrology Ministry of Industry and the National
Organisation of Legal Metrology ONML Algeria (2000-Present)
5 Prof Mohamed Aichouni ASME SQC KAQA
Associate Member of the American Society of Mechanical Engineers ASME (1990-1994)
PhD Fellowship Under the British and the Algerian Governments technical co-operation program
(1988-1992)
Supervisor of the Metrology Section at the Technical Discussion Forum (wwwtknenetvb) and
the Quality Control Section at the Arabic Statistician Discussion Forum
(wwwarabicstatcomboard)
Other Certificates Awarded and Advanced Courses Attended
IRCA training course for Registered Auditors in Quality Management System ISO 90012015
King Abdul-Aziz Quality Award Training courses held by Saudi Arabian Standards Organisation
(SASO) in Al-Khobar and Riyadh (2008)
Training courses (20hours) on AutoCAD Machining and Metal Forming held at Hail College of
Technology (2007)
Computational Fluid Dynamics (CFD) Workshop held at the Imperial College of London 1991
Industrial Flow Metering Course held at the National Engineering Laboratory East Kilbridge
UK 1991
Fluid Flow and Heat transfer modelling workshop held in UMIST The United Kingdom 1990
Advanced Computational Fluid Dynamics Course held at UMIST The United Kingdom 1989
Other Skills
Computer Packages Minitab17 Edraw Microsoft Office (Word Excel Access FrontPage
Visio MindJet)
Languages Fluent in Arabic English and French
Contacts
Current Address University of Hail College of Engineering PO Box 2440 Hail 81441
Saudi Arabia Mobile 00966- 508968402
Email maichouniuohedusa m_aichouniyahoocouk
Web site cuttusmaichouni
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
3 Prof Mohamed Aichouni ASME SQC KAQA
University of Hail Received an appreciation letter from the Director of the National General
Security
Member of the Scientific and Organization Committees of the 4th
National Quality
Conference 3-6 February 2013 Organized jointly by the University of Hail and the Saudi
Standards Organization (SASO) Received an appreciation letter from the Governor of SASO
Chairman of the Scientific Committee of the TQM and Business Excellence in Government
Services Workshop organized by the University of Hail with the Collaboration of the Saudi
Organization for Standards and Quality (SASO) and the Saudi Quality Council on 17th
of May
2010 (httpfacultyuohedusamaichounitqm2010)
Member of a Research Group at King Abdul-Aziz City of Sciences and Technology working
on a project (KACST-N 138-28) with the aim to develop the Strategic Plan for the National
Quality Centre (January 2007-Dec 2007)
Principal Researcher and Leader of Externally Funded Research Projects in the areas of
flow metering flow conditioning drag reduction in pipelines and pipe networks The research
projects were funded by the National Agency of Scientific Research Development (ANDRU-
Algeria) (1992-2001)
External Examiner of more than 30 MSc and PhD theses and 50 BSc Projects
Reviewer in International Journals (The ASME Journal of Fluids Engineering European
Journal of Engineering Education the Journal of Thermoplastic Composite Materials and
Academy Proceedings in Engineering Science)
Scientific head of a Master programme in the area of Applied Thermo-Fluid Engineering
19992001 at the University of Mostaganem (All students have discussed their theses)
Research interests
My current research interests include
Creativity and Innovation Management Total Quality Management Organizational
Excellence Models Quality Improvement in the Construction Industry Quality Improvement in
Government Services Quality in Engineering Education Quality Control Statistical Process
Control and Quality in Services and Manufacturing
Industrial Metrology and Manufacturing Systems
Experimental and Computational Fluid Dynamics Techniques and their applications to
industrial fluid flow Flow metering and flow conditioning systems
Mathematical and Numerical Modelling of Physical Phenomena
Web based Engineering Education (e-Learning) Curriculum Development
Post-Graduate Theses Supervised
05 MSc 2 PhD Theses in areas of Industrial metrology and fluid flow metering
PhD (Awadh Al-Harbi 2016) at UTM Malaysia in Area of business excellence in RampD
Saudi Organizations
Currently 1 PhD is being prepared under my supervision at the University of Sciences and
Technology in Algiers Subject Water Quality assessment in lakes (2015-present)
3 - Administrative Experience
Vice Rector of the University of Mostaganem (Algeria) (1994 ndash 2001)
In charge of Post Graduate Studies Scientific Research and External Relations
Consultancy Advisor for the Vice Rector for Academic Development and Community
Services Hail University (Nov 2010 ndash Present)
4 Prof Mohamed Aichouni ASME SQC KAQA
Vice Dean for Post-Graduate Studies and Scientific Research Engineering College Hail
University (Sept 2016-Present)
Vice Dean for Academic Affairs Engineering College Hail University (June 2013 ndash Sept
2016)
Chairman Industrial Engineering Department Engineering College Hail University (May 2012
ndash June 2013)
Member of the Executive Committee for Cheikh Ali Joumaia Centre for Training and
Community Services Hail University (Sept 2010 ndash 2011)
General Supervisor of the Council of Technical Education and Vocational Training at the
Region of Hail (February 2005 ndash January 2007)
Quality Director Hail College of Technology (February 2005 ndash January 2007)
Chairman of The Mechanical Technology Department Hail College of Technology
(Saudi Arabia) (August 2006 ndashAug 2009)
4 - Community Services
Expert Member and Advisor in projects to develop strategic plans for charity and non-
governmental organizations (King Abdul-Aziz Foundation for Social Services- Hail Charity
Organization for Koran Tahfidh in Riyadh Hail Orphans Charity Association (2008-Present)
Quality Consultant and Member of the Expertise and Consultancy Permanent Committee at
Dr Nacer Al-Rashid Orphanage Centre I Assisted the Orphanage to build a quality system and to
get the ISO 90012008 Certificate (Jan-June 2013)
Main Organizer of Engineering Students Quality Awareness Programs (competitions
trainings seminars) at the University of Hail during the World Quality Day (second Thursday of
November) and the World Metrology Day (20 May)
Quality Consultant for the project to implement the Total Quality Management Strategy at Hail
Police (2007-2009) This project received high distinction from the Police National Leadership
Responsible for Designing several Executive Educational and Training Programs and
Syllabus in contemporary topics of interest to senior management such as Quality
Management Quality Improvement Industrial Maintenance Mechatronics (at the TVTC
and King Abdul-Aziz City of Sciences and Technology)
Responsible for developing and delivering Industrial Training programs on Quality
Management Statistical Process Control Metrology Information Technologies These
training programs were delivered to Governmental Bodies and Industrial organizations
Active Member of the Saudi Quality Council since 2009 Expert Member with the Higher
Education Quality Section (Sept 2013-Present)
Founder Member of the Saudi Quality Association ndash Hail`s section April 2016
Honours Awards Affiliations Membership
IRCA Registered Auditor in QMS ISO 90012015
Certified Assessor at the King Abdul-Aziz Quality Award (KAQA) and Al-Subaie Excellence in
Charity Organizations Award
Member of Curriculum Development Team working on the syllabus of Quality Technician
Degree at the TVTC (2007-2008)
Member of the Arab Institute of Operations and Maintenance(2005-2006)
Member of the National Committee for the evaluation of research projects Ministry of Higher
Education and Scientific Research Algeria (1996-2001)
Member of the National Working Group on Metrology Ministry of Industry and the National
Organisation of Legal Metrology ONML Algeria (2000-Present)
5 Prof Mohamed Aichouni ASME SQC KAQA
Associate Member of the American Society of Mechanical Engineers ASME (1990-1994)
PhD Fellowship Under the British and the Algerian Governments technical co-operation program
(1988-1992)
Supervisor of the Metrology Section at the Technical Discussion Forum (wwwtknenetvb) and
the Quality Control Section at the Arabic Statistician Discussion Forum
(wwwarabicstatcomboard)
Other Certificates Awarded and Advanced Courses Attended
IRCA training course for Registered Auditors in Quality Management System ISO 90012015
King Abdul-Aziz Quality Award Training courses held by Saudi Arabian Standards Organisation
(SASO) in Al-Khobar and Riyadh (2008)
Training courses (20hours) on AutoCAD Machining and Metal Forming held at Hail College of
Technology (2007)
Computational Fluid Dynamics (CFD) Workshop held at the Imperial College of London 1991
Industrial Flow Metering Course held at the National Engineering Laboratory East Kilbridge
UK 1991
Fluid Flow and Heat transfer modelling workshop held in UMIST The United Kingdom 1990
Advanced Computational Fluid Dynamics Course held at UMIST The United Kingdom 1989
Other Skills
Computer Packages Minitab17 Edraw Microsoft Office (Word Excel Access FrontPage
Visio MindJet)
Languages Fluent in Arabic English and French
Contacts
Current Address University of Hail College of Engineering PO Box 2440 Hail 81441
Saudi Arabia Mobile 00966- 508968402
Email maichouniuohedusa m_aichouniyahoocouk
Web site cuttusmaichouni
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
4 Prof Mohamed Aichouni ASME SQC KAQA
Vice Dean for Post-Graduate Studies and Scientific Research Engineering College Hail
University (Sept 2016-Present)
Vice Dean for Academic Affairs Engineering College Hail University (June 2013 ndash Sept
2016)
Chairman Industrial Engineering Department Engineering College Hail University (May 2012
ndash June 2013)
Member of the Executive Committee for Cheikh Ali Joumaia Centre for Training and
Community Services Hail University (Sept 2010 ndash 2011)
General Supervisor of the Council of Technical Education and Vocational Training at the
Region of Hail (February 2005 ndash January 2007)
Quality Director Hail College of Technology (February 2005 ndash January 2007)
Chairman of The Mechanical Technology Department Hail College of Technology
(Saudi Arabia) (August 2006 ndashAug 2009)
4 - Community Services
Expert Member and Advisor in projects to develop strategic plans for charity and non-
governmental organizations (King Abdul-Aziz Foundation for Social Services- Hail Charity
Organization for Koran Tahfidh in Riyadh Hail Orphans Charity Association (2008-Present)
Quality Consultant and Member of the Expertise and Consultancy Permanent Committee at
Dr Nacer Al-Rashid Orphanage Centre I Assisted the Orphanage to build a quality system and to
get the ISO 90012008 Certificate (Jan-June 2013)
Main Organizer of Engineering Students Quality Awareness Programs (competitions
trainings seminars) at the University of Hail during the World Quality Day (second Thursday of
November) and the World Metrology Day (20 May)
Quality Consultant for the project to implement the Total Quality Management Strategy at Hail
Police (2007-2009) This project received high distinction from the Police National Leadership
Responsible for Designing several Executive Educational and Training Programs and
Syllabus in contemporary topics of interest to senior management such as Quality
Management Quality Improvement Industrial Maintenance Mechatronics (at the TVTC
and King Abdul-Aziz City of Sciences and Technology)
Responsible for developing and delivering Industrial Training programs on Quality
Management Statistical Process Control Metrology Information Technologies These
training programs were delivered to Governmental Bodies and Industrial organizations
Active Member of the Saudi Quality Council since 2009 Expert Member with the Higher
Education Quality Section (Sept 2013-Present)
Founder Member of the Saudi Quality Association ndash Hail`s section April 2016
Honours Awards Affiliations Membership
IRCA Registered Auditor in QMS ISO 90012015
Certified Assessor at the King Abdul-Aziz Quality Award (KAQA) and Al-Subaie Excellence in
Charity Organizations Award
Member of Curriculum Development Team working on the syllabus of Quality Technician
Degree at the TVTC (2007-2008)
Member of the Arab Institute of Operations and Maintenance(2005-2006)
Member of the National Committee for the evaluation of research projects Ministry of Higher
Education and Scientific Research Algeria (1996-2001)
Member of the National Working Group on Metrology Ministry of Industry and the National
Organisation of Legal Metrology ONML Algeria (2000-Present)
5 Prof Mohamed Aichouni ASME SQC KAQA
Associate Member of the American Society of Mechanical Engineers ASME (1990-1994)
PhD Fellowship Under the British and the Algerian Governments technical co-operation program
(1988-1992)
Supervisor of the Metrology Section at the Technical Discussion Forum (wwwtknenetvb) and
the Quality Control Section at the Arabic Statistician Discussion Forum
(wwwarabicstatcomboard)
Other Certificates Awarded and Advanced Courses Attended
IRCA training course for Registered Auditors in Quality Management System ISO 90012015
King Abdul-Aziz Quality Award Training courses held by Saudi Arabian Standards Organisation
(SASO) in Al-Khobar and Riyadh (2008)
Training courses (20hours) on AutoCAD Machining and Metal Forming held at Hail College of
Technology (2007)
Computational Fluid Dynamics (CFD) Workshop held at the Imperial College of London 1991
Industrial Flow Metering Course held at the National Engineering Laboratory East Kilbridge
UK 1991
Fluid Flow and Heat transfer modelling workshop held in UMIST The United Kingdom 1990
Advanced Computational Fluid Dynamics Course held at UMIST The United Kingdom 1989
Other Skills
Computer Packages Minitab17 Edraw Microsoft Office (Word Excel Access FrontPage
Visio MindJet)
Languages Fluent in Arabic English and French
Contacts
Current Address University of Hail College of Engineering PO Box 2440 Hail 81441
Saudi Arabia Mobile 00966- 508968402
Email maichouniuohedusa m_aichouniyahoocouk
Web site cuttusmaichouni
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
5 Prof Mohamed Aichouni ASME SQC KAQA
Associate Member of the American Society of Mechanical Engineers ASME (1990-1994)
PhD Fellowship Under the British and the Algerian Governments technical co-operation program
(1988-1992)
Supervisor of the Metrology Section at the Technical Discussion Forum (wwwtknenetvb) and
the Quality Control Section at the Arabic Statistician Discussion Forum
(wwwarabicstatcomboard)
Other Certificates Awarded and Advanced Courses Attended
IRCA training course for Registered Auditors in Quality Management System ISO 90012015
King Abdul-Aziz Quality Award Training courses held by Saudi Arabian Standards Organisation
(SASO) in Al-Khobar and Riyadh (2008)
Training courses (20hours) on AutoCAD Machining and Metal Forming held at Hail College of
Technology (2007)
Computational Fluid Dynamics (CFD) Workshop held at the Imperial College of London 1991
Industrial Flow Metering Course held at the National Engineering Laboratory East Kilbridge
UK 1991
Fluid Flow and Heat transfer modelling workshop held in UMIST The United Kingdom 1990
Advanced Computational Fluid Dynamics Course held at UMIST The United Kingdom 1989
Other Skills
Computer Packages Minitab17 Edraw Microsoft Office (Word Excel Access FrontPage
Visio MindJet)
Languages Fluent in Arabic English and French
Contacts
Current Address University of Hail College of Engineering PO Box 2440 Hail 81441
Saudi Arabia Mobile 00966- 508968402
Email maichouniuohedusa m_aichouniyahoocouk
Web site cuttusmaichouni
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
6 Prof Mohamed Aichouni ASME SQC KAQA
List of Major Publications
Google Scholar Citations httpscholargooglecomcitationsuser=UrPDCQwAAAAJamphl=en
1 ndash Books (in Arabic)
Aichouni M and Al-Ghonamy A ldquoA Practical Guide to Continuous Process Improvement
in the Construction Industryrdquo Hail University Publishing Center 2016
Aichouni M et al ldquoIndustrial Metrology in the perspective of the International Quality
Standards ISO 9000rdquo Hail University Publishing Center 2016
Aichouni Mohamed bdquoAchieving Excellence in Personal Life‟ Dar Al-Ass`hab Book
Publishing Riyadh 1st Edition (2016) ISBN 978-603-90737-5-8 Saudi Quality Council Book
Series N 20
Aichouni Mohamed bdquoQuality Control ndash The Basic Tools and their Applications in
Manufacturing and Services‟ Dar Al-Ass`hab Book Publishing Riyadh 2nd
Edition (2014)
ISBN 978-603-90434-5-4 1st Edition (2007) ISBN 6690-75-688-2 (with a Computer Based
Training CD)
Aichouni Mohamed ldquoStatistical Quality Control Using Microsoft Excel and Minitabrdquo
Hail University Publishing Center 2013 ISBN 978-603-9815-09-9
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Quality Tools for Planning and Managementrdquo Dar Al-Ass`hab Book Publishing
Riyadh 2012 ISBN 978-603-90163-8-0 Saudi Quality Council Book Series N 4
Bachioua L Berwari N and Aichouni M ldquoOrganizational Excellence Introduction to
Quality and Best Practices ndash Concepts and Applicationsrdquo Al-Waraq Book Publishing
Oman Jordan 2012 ISBN 978-9957-33-301-0
Aichouni Mohamed Fundamentals of Dimensional Metrology for ISO 9000 Quality
Standards Al-Obeiken Book Publishing 2011 ISBN 978-9960-54-813-5
Aichouni Mohamed ldquoA Practical Guide to Continuous Process Improvement using the
Seven Basic quality Toolsrdquo Dar Al-Ass`hab Book Publishing Riyadh 2010 ISBN 978-603-
90163-0-4 Saudi Quality Council Book series N 2
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
7 Prof Mohamed Aichouni ASME SQC KAQA
2 ndash International Journals and Edited Books Chapters
ISI Journals
Abdullah AAA Al-Rashed Lioua Kolsi Ahmed Kadhim Hussein Walid Hassen Mohamed
Aichouni Mohamed Naceur Borjini (2017) Numerical study of three-dimensional natural
convection and entropy generation in a cubical cavity with partially active vertical walls Case
Studies in Thermal Engineering Vol10 September pp 100ndash110 available at
httpwwwsciencedirectcomsciencearticlepiiS2214157X17300989
Aichouni M Messaoudene NA Touahmia M and Al-Ghonamy A (2017) Statistical analysis of
concrete strength variability for quality assessment Case study of a Saudi construction project
International Journal of Advanced and Applied Sciences 4(7) 101-109 httpwwwscience-
gatecomIJAASV4I7Aichounihtml
Lioua Kolsi Emtinene Lajnef Walid Aich Abdulaziz Alghamdi Mohamed Ahmed Aichouni
Mohamed Naceur Borjini Habib Ben Aissia (2017) Numerical investigation of combined
buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3
nanofluid Alexandria Engineering Journal Volume 56 Issue 1 March 2017 Pages 71ndash79 httpwwwsciencedirectcomsciencearticlepiiS111001681630271X
A Horimek N Ait Messaoudene W Aich M Aichouni L Kolsi J Ghernaout Laminar forced
convection of a pseudo-plastic thermo-dependent fluid in an annular horizontal duct (2017) The
Arab Gulf Journal of Scientific Research (Accepted)
I Badawi M Aichouni N A Messaoudene (2016) Developing an Innovative and Creative
Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education Engineering
Technology and Applied Research Vol 6 (6) pp1297-1302
httpetasrcomindexphpETASRarticleview838409
Daoud S A Nehari D Aichouni M and Nehari T (2016) Numerical Simulations of an
Oscillating Flow Past an Elliptic Cylinder Journal of Offshore Mechanics and Arctic
Engineering-Transactions of the ASME Vol 138 (1) pp 1-11 httpoffshoremechanicsasmedigitalcollectionasmeorgarticleaspxarticleid=2478985
Mohamed Aichouni Lioua Kolsi Noureddine Ait-Messaoudenne Walid Aich (2016)
Computational Study of the Performance of the Etoile Flow Conditioner International Journal
of Advanced and Applied Sciences Vol 3(9) pp 25-30
Nader M Okasha and M Aichouni (2015) Proposed Structural Reliability-Based Approach for
the Classification of Concrete Quality Journal of Materials in Civil Engineering Vol 27(5) httpascelibraryorgdoiabs101061(ASCE)MT1943-55330001131
Djamel Ghernaout Abdulaziz Ibraheem Al-Ghonamy Noureddine Ait Messaoudene Mohamed
Aichouni Mohamed Wahib Naceur Fatma Zohra Benchelighem and Ahmed Boucherit (2015)
Electrocoagulation of direct brown 2 (DB) and BF cibacete blue (CB) using aluminum electrodes
Separation Science and Technology Vol 50 pp1413-1420 httpwwwtandfonlinecomdoiabs101080014963952014982763
Mohamed Aichouni Noureddine Ait-Messaoudene Abdulaziz Al-Ghonamy and Mabrouk
Touahmia (2015) An Empirical Study of Quality Management Systems in the Saudi Construction
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
8 Prof Mohamed Aichouni ASME SQC KAQA
Industry International Journal of Construction Management Vol 14(3) pp 181-190 httpwwwtandfonlinecomdoiabs101080156235992014922724U_ogPcV_snA
Abdel Aziz Khaldi Driss Nehari Mohamed Aichouni San Sait Eren (2013) Numerical
investigations of AC electrokinetic forces to enhance the rate of transport of reactants in a
microchannel MECHANIKA Volume 19(4) 437-444 httpdxdoiorg105755j01mech1945047
Aichouni M Benchicou S and Nehari D (2013) ldquoKnowledge Management through the e-
Learning Approach ndash A Case Study of Online Engineering Coursesrdquo European Journal of
Engineering Education httpdxdoiorg101080030437972013786025
Benchicou S Aichouni M and Nehari D (2010) ldquoE-Learning in Engineering Education A
Theoretical and Empirical Study of the Algerian Higher Education Institutionrdquo European Journal
of Engineering Education Vol 35 (3) pp 25-343
Non-ISI Journals
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi(2015) Creativity and Innovation among Gifted Saudi Students-An
Empirical Study Procedia - Social and Behavioral Sciences Volume 195 3 July 2015 Pages
1371ndash1379 httpwwwsciencedirectcomsciencearticlepiiS1877042815038823
B Ould said N Retiel and M Aichouni (2014) Numerical Simulation of Natural Convection in
a Two-Dimensional Vertical Conical Partially Annular Space Recent Advances in Mechanical
Engineering and Mechanics pp 171-176 httpwwweuropmentorglibrary2014venicebypaperMECHMECH-26pdf
MAichouni N Ait-Messaoudene and A Al-Ghonamy (2014) On the Use of Johnson`s
Distribution in Quality and Process Improvement Int Journal of Economics and Statistics
Volume 2 pp 362-367 httpwwwnaunorgmainNAUNeconomics2014a182001-328pdf
WAY Yusoff Hadi Puwantoc M Aichounid and Farizahani (2014) Investigation into the
differences thermal properties of SLS polymer powder materials using Differential Scanning
Calorimetry (DSC) Applied Mechanics and Materials Vols 548-549 pp 53-56
httpdoi104028wwwscientificnetAMM548-54953
I Mahamid A Al-Ghonamy M Aichouni (2014) Factors Affecting Accuracy of Pretender post
Estimate Studies of Saudi Arabia International Journal of Applied Engineering Research Vol
9 Number 1 pp 21-36
Ibrahim Mahamid A Al-Ghonamy M Aichouni (2013) Major Factors Influencing Employee
Productivity in the KSA Public Construction Projects International Journal of Civil amp
Environmental Engineering IJCEE-IJENS Vol 14 No 01 pp 1-5
B Ould Said N Retiel M Aichouni (2013) LAMINAR NATURAL CONVECTION IN A
TWO-DIMENSIONAL VERTICAL CONICAL ANNULAR SPACE Phys Chem News Vol
67 pp 50-56
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
9 Prof Mohamed Aichouni ASME SQC KAQA
WAY Wan Yusoff M Aichouni M Zul Amzar Zulkiflee (2013) Fabrication and Design of
Customized Maxillofacial Biomodel for Implant Using Computer Aided Design and Rapid
Prototyping Technique Applied Mechanics and Materials Vol 391 pp 406-409
doi104028wwwscientificnetAMM391406
Aichouni M and Eid El-Haisoni (2013) Empirical Investigation of the e-Learning Approach in
Saudi Universities Int Journal of English and Education Vol 2 N 1 pp 264-283
M Aichouni bdquo(2013) Quality in the Construction Industry Consumer and Quality Special
Volume for the 4th
National Quality Conference February 3-6 9 pages
M Aichouni bdquo(2012) Continuous Process Improvement Tools and Techniques Consumer and
Quality Vol 28 pp 38-41
Aichouni M (2012) On the use of the basic quality tools for the improvement of the
construction industry A case study of a ready mixed concrete production process Int J of Civil
amp Environmental Eng Vol 12 N 5 pp 31-38 httpwwwijensorgvol_12_i_05127605-
0808-ijcee-ijenspdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Metrology Laboratory in Hot Arid Regions CAL-LAB Magazine Vol 18 N 2 pp 36-40
httpwwwcallabmagcomwp-contentuploads201105issue-April2011pdf
Al-Ghonamy A Halawa M and Aichouni M (2011) Technical Requirements for a Portable
Laboratory for use in Hot Arid Regions The Canadian Journal on Electrical and Electronics
Engineering Vol 2 (4) pp 103-111 httpwwwampublishercomApril202011EEE-1104-
018TechnicalRequirementsforaPortableLaboratoryforUseinHotAridRegionspdf
Aichouni M and Benchicou S (2008) bdquoHow Technical College Courses become Successful
web-based e-Learning Models Through the Integration of Teaching Research and Community
Services Activities‟ In ldquoIntegrating Teaching and Research with Community Servicerdquo Sharjah
University Press The UAE ISBN 9948-10-1064-6
Retiel N Bouguerra E h and Aichouni M `Effect of curvature ratio on cooperating double-
diffusive convection in vertical annular cavities` Journal of Applied Sciences Vol 6 N 12 pp
2541-2548 2006
Aichouni M `Statistical Quality Control Techniques` Quality The Quarterly Bulletin Issued
from the Total Quality Center of Abu Dhabi Police pp 10-11 N 6 September 2005
Laribi B Waters P Aichouni M and Ouali M bdquo Further analysis of the aerodynamic behaviour
of flow conditioners‟ The European Journal of Mechanical and Environmental Engineeringrsquo
Vol 48 N 3 pp 167-176 Sept 2003
Laribi B Waters P and Aichouni M bdquo A Comparative study of the aerodynamic behaviour of
three flow conditioners‟ The European Journal of Mechanical and Environmental
Engineeringrsquo Vol 48 (1) pp 21-30 March 2003
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
10 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M and Laribi B bdquoComputational study of the aerodynamic behaviour of the Laws vaned
plate flow conditioner‟ Paper Ndeg FEDSM2000-1106 In Forum on Fluid Measurement and
Instrumentation 2000 ASME Fluids Engineering Conference Boston USA June 11-15 2000
Aichouni M Laribi B Retiel N Houat Nehari D and Benchicou S bdquoExperimental investigation of
the installation effects on the Venturi flow meter performance‟ Paper Ndeg FEDSM2000-1107 In
Forum on Fluid Measurement and Instrumentation 2000 ASME Fluids Engineering
Conference Boston USA June 11-15 2000
M Aichouni EM Laws AK Ouazzane bdquoExperimental Study of the effects of upstream flow
condition upon Venturi flow meter performance‟ Presented at bdquoThe 6th International Symposium on
Flow Modelling and Turbulence Measurements‟ Florida USA September 8-10 1996 Published In
bdquoFlow modelling and turbulence measurementsrsquo ed CJ Chen et al AA Balkema Roterdam
The Netherlands
E M Laws and M Aichouni bdquoAn evaluation of the accuracy of Hot-wire measurements‟ Thermal
Anemometry 1993 FED-Vol 167 pp 135-143 Edited by DE Stock et al The Fluid Engineering
Conference Washington DC USA June 20-24 1993
E M Laws and M Aichouni bdquoA Comparative study of two turbulence Models in Predicting the
development of initially distorted Turbulent Pipe flows‟ In Data for Validation of CFD Codes
FED-Vol 146 pp 45-60 Edited by Dan Goldstein et al The Fluid Engineering Conference
Washington DC USA June 20-24 1993
M Aichouni and E M Laws bdquoComputational treatment of initially distorted pipe flow‟ In Forum
on Turbulent flows - 1991 FED - Vol 112 pp 171-177 Edited by MJ Morris et al bdquoThe first
ASME JSME Fluids Engineering Conference‟ Portland Oregon USA June 23-27 1991
E M Laws and M Aichouni bdquoAnalysis of the decay of turbulent pipe flow - A preliminary study‟
In Forum on Turbulent Flows - 1990 FED-vol 94 pp 51-56 Edited by WM Bower et al
bdquo1990 ASMECSME Fluids Engineering Conference‟ Toronto Canada June 4-7 1990
3 ndash International Conferences and Proceedings
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Knowledge Transfer in Metrology ndash The Key towards Excellence Innovation
and Creativity in Modern Organizations The First Gulf Metrology Forum 14-15 Dec 2015 Doha
Qatar
M Aichouni Fostering Creativity and Innovation through Collaborative Programs ASQ MENA
Regional Quality Conference 4-5 November 2015 Dubai UAE
M Aichouni RM Al-Hamali A Al-Ghamdi A Al-Ghonamy E Al-Badawi M Touahmia and
N Ait-Messaoudene Does our Educational System Enhance Creativity and Innovation among
Gifted Students Proceeding of the International Conference on Advances in Education and
Social sciences 12-14 October 2015 Istanbul University Turkey pp 370-378 ISBN 978-605-
64453-4-7 httpwwwocerintorgadved15_epublicationpapers384pdf
M Aichouni M Touahmia A Al-Ghamdi N Ait-Messaoudene RM Al-Hamali A Al-
Ghonamy and E Al-Badawi Creativity and Innovation among Gifted Saudi Students-An
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
11 Prof Mohamed Aichouni ASME SQC KAQA
Empirical Study World Conference on Technology Innovation and Entrepreneurship 28-30
May 2015 Istanbul University Turkey
M Aichouni A I AL-Ghonamy and L Bachioua (2014) Control Charts for Non-Normal Data
Illustrative Example from the Construction Industry Business The 16th
WSEAS International
Conference on Mathematical and Computational Methods in Science and Engineering
(MACMESE14) Kuala Lumpur Malaysia April 23-25 httpwwwwseasuse-
libraryconferences2014MalaysiaMACMESEMACMESE-10pdf
Belkacem Ould Said Nourddine Retiel Abdelilahbenazza Mohamed Aichouni (2014)
Numerical Study of Natural Convection Heat Transfer in a Two-dimensional Vertical Conical
Partially annular Space ICAUP 2014 International Conference on Astroparticle and Underground
Physics Dubai March 12-13 httpswwwwasetorgconference201403dubaiICAUPprogram
B Ould Said N Retiel M Aichouni (2014) Laminar Natural Convection in a Two-Dimensional
Vertical Conical Partially Annular Space Proceedings of the 2014 International Conference on
Mechanics Fluid Mechanics Heat and Mass Transfer (MFMHMT 2014) Interlaken Switzerland
February 22-24 Published in Recent Advances in Mechanical Engineering Series ndash 9 ISSN 2227-
4596 ISBN 978-1-61804-220-0 httpwwweuropmentorglibrary2014interlakenbypaperMECHMECH-
00pdf
WAY Yusoff Aichouni M MA A Raman M I Abu Bakar (2013) Fabrication and Design of
Customized Mandible Biomodel for Implant Using Computer Aided Design and Rapid Prototyping
Technique 2nd International Conference on Advances in Mechanics Engineering (ICAME 2013)
Indonesia July 13-14
Aichouni M (2013) Use of the Basic Quality Tools for the Improvement of the Production
Process of a local Ready Mixed Concrete Plant in Hail The 4th
National Quality Conference
Hail University ndash Saudi Standards Organization (SASO) 3-6 February
(ماألدواتمالسووااماألسيسوويجملة وويدسمعمالسوواامالحوا ووامل سوو مممم2013)موالغني ووحممعاوو ال معيشووي حممد وو مم
وزارسمالشؤونمالقحو جممخم رباتماجليدسميفماملشحوعيتماإل شي يجم وسموم حضاجليدسميفماملشير اماإل شي يجمم
2013أبح لمم23-22لوممامليافقمهو1361434-12مالح يضوالاة جم
RetielN Ould Said B and Aichouni M(2012) CFD simulation of heat transfer in a two-
dimensional vertical conical partially annular space ICHMT International Symposium on
Advances in Computational Heat Transfer (CHT-12) Bath UK July 1-6
Aichouni M El-Haisoni E and Bachioua L Preliminary Study of the e-Learning Strategy in
Saudi Higher Education Institutions The 5th International Conference on ldquoExcellence in
Education 2011 Giftedness-Creativity-Developmentrdquo Istanbul University Turkey 6-9 July 2011
Aichouni M and Al-Ghonamy A Towards a Simple Approach based on Process Improvement
to Measure Quality Indicators in Higher Education Institutions The 3rd
Conference on Quality
in University Education in the Islamic World Naif Arab University For Security Science
(NAUSS) Riyadh 20-22 December 2010
Aichouni M and Al-Shammari S bdquoOn the Use of Quality Tools and Techniques for
Improvement of the Learning Process in Engineering Education‟ The 5th
International Fourm on
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
12 Prof Mohamed Aichouni ASME SQC KAQA
Engineering Education IFEE 2010 - ldquoEngineering Education in the 21st Century ndash Quality
Globalization and Local Relevancerdquo Sharjah University 23-25 November 2010 The UAE
Aichouni M Al-Rugy N and Al-Mutairi K `The Total Quality Management Approach as a
Strategy for performance improvement in the Saudi Police ndash A Case Studyrdquo The International
Conference on Administrative Development Towards Excellence in Public Sector Performance
Riyadh 1-4 November 2009
Aichouni M and Benchicou S `Back to Basics The seven basic quality tools and their
applications in manufacturing and services` The 2nd
Quality Congress Middle East (QC2008)
Dubai UAE April 6-9 2008
Aichouni M `Strategic Planning as a Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo The Third Conference on TQM in Education and
Training Jeddah College of Technology 10-11 November 2008 (The article is in Arabic
language)
Retiel N Aichouni M and Bouguerra EH `Numerical Investigation of transient formation of
multilayered structures associated with double diffusive convection in annular cavities The 3rd
International Conference on Thermal Engineering ndash Theory and Applications Amman Jordan
May 21-23 2007
Aichouni M and A S Al-Harbi ` Quality Education and Training ndash Experience with an Arabic
web-based e-Learning course on Quality Control` e-Proceedings of the 1st International Congress
of the Middle East Quality Association (MEQA-07-UAE) Dubai UAE March 25-27 2007
(ISBN 978-9948-03-410-0)
Aichouni M bdquoMeasurement of the Quality of the Industrial Maintenance Training Program from
the Saudi Market stand point (in Arabic)‟ Proceedings of The 4th Saudi Technical Conference
and Exhibition GOTEVOT Riyadh Kingdom of Saudi Arabia December 2-6 2006
Al Nais M O and Aichouni M `Industrial Maintenance Education and Training in the new
millennium` Proceedings of the 4th
International Operation and Maintenance Conference in the
Arab Countries OMAINTEC 2005 Beirut 20-23 June 2005
Aichouni M and Al Nais M O bdquoe-Learning in Technical Education and Vocational Training
From Concepts to Practice‟ Proceedings of the 3rd
Saudi Technical Conference and Exhibition
GOTEVOT Riyadh Kingdom of Saudi Arabia December 11-15 2004
Aichouni M and Belebna M bdquoMetrology Training at the Technical Education and Vocational
Training` Proceedings of the 3rd
Saudi Technical Conference and Exhibition GOTEVOT
Riyadh Kingdom of Saudi Arabia December11-15 2004
Al Nais MO and Aichouni M `Web-based Approach Applied to Technical Courses to Enhance
Engineering Education Quality` Proceedings of the 1st Baha Technical Meeting Vol 2 pp 131-
137 Baha College of Technology May 3-5 2004
Aichouni M and Al Nais MO `Computer Based demonstrations of Statistical Quality Control
for Engineering Students` Paper N Comp 132 The 2nd
Saudi Science Conference King Abdul
Azziz University Jeddah 15-17 Marsh 2004
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
13 Prof Mohamed Aichouni ASME SQC KAQA
Benchicou S and Aichouni M `Computational Study of the Aerodynamic Behavior of Flow
Conditioners Used in the Oil and Gaz Industry` Paper N Eng 132 The 2nd
Saudi Science
Conference King Abdul Azziz University Jeddah 15-17 Marsh 2004
Aichouni M and Al Nais M O bdquoInteractive Demonstrations of Statistical Quality Control for
Engineering Students using Computer-Based Toolsbdquo The Third Forum on Engineering Education
Sharjah University UAE October 14-15 2003
Aichouni M Laribi B Benchicou S and Chirigui M Metrological aspects of Industrial flow
metering systems The 4th Middle East Refining and Petrochemicals Exhibition and Conference
Bahrein 29 Sept-01 Oct 2003
Aichouni M Al Nais M and Laribi B bdquoOn the metrological performances of differential flow
meters‟Proceedings of The 6th
Saudi Engineering Conference Engineering and Engineering
Education vol 5 pp 97 ndash 101 King Fahd University of Petroleum and Minerals Dahran
Kingdom of Saudi Arabia December 14-17 2002
Aichouni M and Al Nais M bdquoAn educational package on statistical quality control for
engineering students‟ The 2nd
Saudi Technical Conference and Exhibition GOTEVOT Riyadh
Kingdom of Saudi Arabia October 26-30 2002
Laribi B Waters P And Aichouni M bdquoExperimental study of the aerodynamic behavior
downstream of three flow conditioners‟ Paper Ndeg FEDSM2002-31080 pp 115-119 The 2002
ASME Fluids Engineering Conference Montreal Quebec Canada July 14-18
doi101115FEDSM2002-31080
Aichouni M Laribi and Wauters P bdquoExperimental investigation of the installation effects on
Venturi and Orifice flowmeters‟ The 10th
International Metrology Congress BNM Saint Louis
France October 22-25 2001
Laribi B and Aichouni M bdquoExperimental study of the decay of swirling turbulent pipe flow and
its effect on the orifice meter performance‟ Paper Ndeg FEDSM2001-18039 2001 ASME Fluids
Engineering Conference New Orleans USA May 29 ndash June 1 2001
Benchicou S and Aichouni M bdquoAn experimental investigation of the accuracy of industrial Venturi
flow meters‟ The 5th
International Meeting on Energetic Physics University of Bechar Algeria
November 07 ndash 09 2000
Aichouni M and Messoul A bdquoNumerical study of turbulent flow in smooth and rough circular
pipes The 5th
International Meeting on Energetic Physics University of Bechar Algeria November
07 ndash 09 2000
Aichouni M and Benchicou S bdquoTurbulence control by passive means - Applications to drag
reduction‟ 2nd
International Colloquium on marine sciences Naval Forces Commandment Algiers
May 29-31 1999
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoHow flow meter
condition affects measurements accuracy‟ 7th International Symposium on Flow Modelling and
Turbulence Measurements‟ Tainan Taiwan October 5-7 1998
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
14 Prof Mohamed Aichouni ASME SQC KAQA
Aichouni M Mous M Benchicou S Mouaici M Belghit M Mechmeche M bdquoExperimental
study of the effect of internal geometrical irregularities on the performance of a Venturi flow meter‟
3rd
Scientific and Technical Meeting of SONATRACH Algiers April 19-22 1998
M Aichouni M Mouaici S Benchicou Y Fergag G Farhi M Benni et A Djedid bdquoExperimental
study of the installation effects upon a Venturi flow meter‟ Proceedings of the First Arab Congress
on Mechanics vol 1 pp 222-216 Damascus Syria 01-03 June 1997
M Aichouni S Benchicou EM Laws bdquoNumerical treatment of partial differential equations
Applications to thermo-fluid dynamics problems‟ 4th International Colloquium on Numerical
Analysis Plovdiv University Bulgaria August 13-17 1995
E M Laws and M Aichouni bdquo The development of fully development turbulent pipe flow - An
analytical and experimental study of the entrance region‟ The Eighth Symposium on Turbulent
Shear Flows Munich Germany September 9-11 1991
4 ndash Workshops Trainings and General Presentations
The List includes only recent workshops and presentations
M Aichouni bdquoQuality Tools for Performance Improvement in Security Organizations Workshop
delivered for Saudi Security Authorities during the 3rd
Forum on Total Quality in Public Security 24-
26 February 2014 Jointly Organized by Hail Patrols Directorate and the University of Hail
M Aichouni bdquoMetrology and Calibration World Quality Day 20 May 2013 the Saudi Quality
Council Jeddah
M Aichouni bdquoStatistical Process Control in the Construction Industry‟ The Saudi BinLaden Group
Headquarters Jeddah World Quality Day 21 November 2011
M Aichouni bdquoQuality Improvement Using the Seven Basic Quality Tools‟ Training course
delivered to The Saudi Quality Council Jeddah June 8 2010
M Aichouni bdquoThe Total Quality Management Approach in Government Services‟ Presentation
given to Top Management Leadership of Hail Police August 16th
2010
M Aichouni bdquoThe Six Sigma Approach‟ Presentation given to Gulf Farabi Co Top Management
Al-Khobar May 29 2009
M Aichouni bdquoProcess Improvement in Healthcare Services‟ Health Care Management Network
King Khaled Eye Specialist Hospital Riyadh June 24th
2009
M Aichouni bdquoTotal Quality Management Approach in for Performance Improvement in the Police
Service‟ Hail Police (Dawriyates) May 14th
2008
Aichouni M `Strategic Planning A Strategy for Performance and Quality Improvement of the
Training Process at Technical Collegesrdquo Hail College of Technology 25 November 2008
M Aichouni bdquoe-Learning ndash From Concepts to Practice in Engineering Education‟ Hail College of
Technology Mechanical technology Department Nov 8 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008
15 Prof Mohamed Aichouni ASME SQC KAQA
M Aichouni bdquoHow to Write a Research Paper‟ Hail College of Technology Mechanical technology
Department September 29 2008