1|P a g e

CURRICULUM FOR THREE YEAR DIPLOMA COURSE IN ===================================== : MECHANICAL ENGINEERING : : Effective from Session : ===================================== ==================== ==================== ==================== : Annual System : ==================== Prepared By ================================= : Curriculum Development Cell : ================================= INSTITUTE OF RESEARCH DEVELOPMENT & TRAINING, U.P., KANPUR APPROVED BY ================================= : BOARD OF TECHNICAL EDUCATION : : U.P. LUCKNOW, : :CORRECTED AS SYLLABUS COMMITTEE OF: : B.T.E. MEETING HELD ON 03.12.12 : =================================

2|P a g e

STUDY AND EVALUATION SCHEME FOR THREE YEARS DIPLOMA COURSE IN :- 1. Mechanical Engg.(Production) 2. Mechanical Engg.(Automobile) 3. Mechanical Engg.(Referigeration & Air Conditioning) 4. Mechanical Engg.(Repair & Maintenance) 5. Mechanical Engg.(Computer Aided Design) (Effective From ) I YEAR ------------------------------------------------------------------------------------------------------------- Curriculum | | Scheme of Examination | ----------------------| |-----------------------------------------------------| Periods Per Week | S U B J E C T | Theory | Practical |Gra-| ----------------------| |-----------------------|------------------------|nd | Le|Tut|Dr|Lab|Work|Tot| |Examination|Sess.|Total|Examination|Sess.| Total|Tot-| c.|ori|aw| |Shop|al | |----------| Marks|Marks|-----------|Marks| Marks|al | |al | | | | | |Dur.|Marks| | |Dur.| Marks| | | | --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| 3 | - |- | 2 | - | 5 |1.1 Professional Communication |2.5 | 50 | 20 | 70 | 3 | 20 | 10 | 30 |100 | 3 | 1 |- | - | - | 4 |1.2 Applied Mathematics-I |2.5 | 50 | 20 | 70 | - | - | - | - | 70 | 3 | 1 |- | 2 | - | 6 |1.3 Applied Physics |2.5 | 50 | 20 | 70 | 3 | 40 | 20 | 60 |130 | 3 | - |- | 2 | - | 5 |1.4 Applied Chemistry |2.5 | 50 | 20 | 70 | 3 | 40 | 20 | 60 |130 | - | - |8 | - | - | 8 |1.5 Engineering Drawing |3.0 | 50 | 20 | 70 | - | - | - | - | 70 | 2 | 1 | | 2 | - | 5 |1.6 Applied Mechanics |2.5 | 50 | 20 | 70 | 3 | 40 | 20 | 60 |130 | 3 | - |- | 2 | - | 5 |1.7 Elements of Mech. Engg. |2.5 | 50 | 20 | 70 | 3 | 40 | 20 | 60 |130 | 2 | - |- | - | - | 2 |1.8 Elementary Workshop Tech. |2.5 | 50 | 20 | 70 | - | -- | -- | -- | 70 | - | - |- | - | 8 | 8 |1.9 Workshop Practice | -- | -- | -- | -- | 4 | 60 | 30 | 90 | 90 | | | | | | |1.10Field Exposure-I | -- | -- | -- | -- | 2 | -- | 30 | 30 | 30 | | | | | | | (Assessment at Instt. Level)| | | | | | | | | | --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| 19| 3 |8 |10 | 8 |48 | |-- |400 | 160 | 560 | | 240 | 150 | 390 | 950| --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| Games/NCC/Social and Cultural Activities + Discipline ( 30 + 20) | 50| |----| TOTAL |1000| ------ NOTE:- (1) Each period will be 50 minutes duration. (2) Each session will be of 32 weeks. (3) Effective teaching will be at least 25 weeks. (4) Remaining periods will be utilised for revision etc. (5) After the Annual Exam.Student of I year Mecanical Engg will go for a two week visit of a small/medium size industry. It will be structured and supervised by the institution. Purpose of the visit is to give students an exposure of industrial setup and that of simple tools, instruments and the skill there in day to day use. Every student will submit the institution a report of his visit. The report will invaribly contain the discription of his observations about (1) Products/Work (2) Tools and Equipments Used. He will be evaluated at the institution level for 30 marks--20 for viva and 10 for the reprot presented. See Annexure -I. STUDY AND EVALUATION SCHEME FOR THREE YEARS DIPLOMA COURSE IN :- 1. Mechanical Engg.(Production) 2. Mechanical Engg.(Automobile) 3. Mechanical Engg.(Referigeration & Air Conditioning) 4. Mechanical Engg.(Repair & Maintenance) 5. Mechanical Engg.(Computer Aided Design) (Effective From ) II YEAR ------------------------------------------------------------------------------------------------------------- Curriculum | | Scheme of Examination | ----------------------| |-----------------------------------------------------| Periods Per Week | S U B J E C T | Theory | Practical |Gra-| ----------------------| |-----------------------|------------------------|nd | Le|Tut|Dr|Lab|Work|Tot| |Examination|Sess.|Total|Examination|Sess.| Total|Tot-| c.|ori|aw| |Shop|al | |----------| Marks|Marks|-----------|Marks| Marks|al | |al | | | | | |Dur.|Marks| | |Dur.| Marks| | | | --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| 3 | 1 | -| - | - | 4 |2.1 Applied Mathematics-II |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | 3 | 1 | -| - | - | 4 |2.2 Mechanics of Solids |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | 2 | 1 | -| - | - | 3 |2.3 Materials & Material |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | | | | | | | Science | | | | | | | | | | 2 | 1 | -| - | - | 3 |2.4 Hydraulics & Hydraulic |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | | | | | | | Machines | | | | | | | | | | 2 | 1 | -| - | - | 3 |2.5 Thermal Engineering |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | 2 | - | -| - | - | 2 |2.6 Manufacturing Processes |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | 2 | - | -| - | - | 2 |2.7 Electrical Technology & |2.5 | 50 | 20 | 70 | -- | -- | -- | -- | 70 | | | | | | | Electronics | | | | | | | | | | 1 | - | -| 3 | - | 4 |2.8 Computer Application For | -- | -- | -- | -- | 3 | 60 | 30 | 90 | 90 | | | | | | | Engineering | | | | | | | | | | - | - | 8| - | - | 8 |2.9 Mechanical Engg. Drawing |3.0 | 50 | 20 | 70 | | -- | -- | -- | 70 | | | | | | | Practicals | | | | | | | | | | - | - | -| 2 | - | 2 |2.10 Mechanics of Solid Lab | -- | -- | -- | -- | 3 | 40 | 20 | 60 | 60 | - | - | -| 1 | - | 1 |2.11 Thermal Engineering Lab | -- | -- | -- | -- | 3 | 20 | 10 | 30 | 30 | - | - | -| 2 | - | 2 |2.12 Hydraulics Lab | -- | -- | -- | -- | 3 | 20 | 10 | 30 | 30 | - | - | -| 2 | - | 2 |2.13 Electrical Technology | -- | -- | -- | -- | 3 | 40 | 20 | 60 | 60 | | | | | | | & Electronics Lab | | | | | | | | | | - | - | -| - | 8 | 8 |2.14 Manufacturing Processes | -- | -- | -- | -- | 6 | 80 | 40 | 120 |120 | | | | | | | (W/S Practice ) | | | | | | | | | | --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| 17| 5 |8 |10 | 8 |48 | |-- |400 | 160 | 560 | | 260 |130 | 390 |950 | --|---|--|---|----|---|-------------------------------|----|-----|------|-----|----|------|-----|------|----| Games/NCC/Social and Cultural Activities + Discipline ( 30 + 20) | 50 | |----|