CTX SpecSheets 5July2019€¦ · the DynaStage™ plug-and-go detonator. WST™ Wireline Separation...
Transcript of CTX SpecSheets 5July2019€¦ · the DynaStage™ plug-and-go detonator. WST™ Wireline Separation...
For more information contact AYRA ROACH P: 682.351.0437 E: [email protected] © Canatex Completions Solutions Inc. All Rights Reserved
The WST™ is our next generation advancement of our fi eld proven and widely accepted ballistic release tool, the BRT. It has been specifi cally designed to reduce potential leak paths, eliminate wiring, shorten the assembly, and make use of the DynaStage™ plug-and-go detonator.
WST™
Wireline Separation ToolThe Canatex WST is a reliable ballistic release toolspecifi cally designed to incorporate the TopFire™ detonator technology from DynaEnergetics™.
Specifi cations
O.D. SIZES AVAILABLE
2.75", 2.875", 3.125"
MAXIMUM PULLING
CAPABILITIES
42,000 LBS
MAXIMUM EXTERNAL PRESSURE
RATING
20,000 PSI
TOP CONNECTION
EXTERNAL
1-5/8-6 TPI. ACME (PIN UP)
BOTTOM CONNECTION
INTERNAL
1-5/8-6 TPI. ACME (BOX END)
FISHING NECK
EXTERNAL 1-3/4”
SEALS
VITON 90 DUROMETER
METAL COMPOSITION
4340 NICKEL-CHROMIUM-
MOLYBDENUM ALLOY STEEL
Applications
Plug and perf operations
Horizontal wells
Wells with high
dogleg severity
In wells with casing
deformation that
increases the risk
of becoming stuck
Features
Maximizes strength of weak point in line
Fail safe to protect
against accidental release
Can be run multiple times
with minimal maintenance
20,000psi pressure rating
Uses Dynastage™ TopFire™
detonator technology
EXTERNAL1 5/8" - 6 ACME
24.3"
INTERNAL1 5/8" - 6 ACME
DCN: CX18010.X02
The WST™ assembly replaces disconnect technology that rely on tensile loads to shear activate. This permits maximization of the line strength to intervene in extended reach horizontal wells and prevent pumping-off bottom hole assemblies. The WST™ is founded on extremely reliable disconnect technology that will release from a downhole assembly, when required to do so, leaving a standard fi sh-neck profi le.