RETROFIT ANCHORING

OFMASONRY AND STONE FACADES

Failure should NOT

happen

Prevent Disaster

Missing panel

It fell 17 stories…

IT’S THE OBVIOUS

THAT GETS ATTENTION

Applications for CTP Restoration Anchors

Brick Veneer Cavity Walls with:• Insufficient Ties• Corroded Ties• Concrete Back-Up• Metal Stud Back-Up• Wind Load Fortification

Applications for CTP Restoration Anchors

• Composite Walls where header brick have failed

• Soft Brick or Mortar• Deep Reaching Mulit-wythe

connections

Applications for CTP Restoration Anchors

Peripheral areas around bulges in walls or areas to

be removed

Applications for CTP Restoration Anchors

Non-Brick Facades such as:• Limestone• Granite • Precast

Stitch-Tie Grip –Tie Series

Façade-Tie Bracket

CTP Products For Restoration

• No Tension Stresses Between Connecting Wythes

Engineered Lead Angle (both Ends)

Axial Core:Provides In-Plane Ductile Strength and Bridging Stiffness for Hole Alignment

Drive Point (Either End)

Helical Pitch

• Load Distributed over the contact Area of Anchor

CTP Stitch-TieTM

Stitch-TieTM Product Application

Stitch-Tie Grip –Tie Series

Façade-Tie Bracket

CTP Products For Restoration

Stabilizing Grip

Torque 50-100 in-lbs.

Shaft:304 S.S

Mechanical Grip

• Manufactured with Corrosion Resistant Materials

CTP Grip-Tie

Stitch-Tie Grip –Tie Series

Façade-Tie Bracket

CTP ProductsFor Restoration

Bracket Attachment

In-Plane Movement

Out of Plane Restraint

X Positive Mechanical Anchorage in Brick

or Mortar Joint

No Exterior Veneer Hole

Corrosion resistant material

Installs from INTERIOR

Can ALSO use Helical Anchorage in Brick or Mortar Joint

CTP Façade-Tie Bracket

CTP Façade-Tie Bracket

Installs from INTERIOR

We also

specialize in

Masonry Ties

for Brick

Construction

CTP5801 Veneer Tie CTP-16

CTP ProductsFor Brick Construction

Performance

Seismic Reinforcement

½” In-Plane Movement

Safe Edges

Single Screw

1-1/2” Adjustability

No Mortar Bridging

CTP-16

CTP5801 Veneer Tie

CTP-16

CTP Products

3”, 4”, 5”, 6”,& 7” Ties

Stainless Steel or

Hot Dip Galvanized Assembly

CTP Masonry Fastener Positive Mechanical

Anchorage

Fits Narrow ½” cavity

Plate Adjusts Vertically 1 ¼”

up/down

CTP 5801 Veneer Tie

Other Accessories Available at CTP

CTP Insulation Retainer

Plate

CTP

MAD 2000

Stone Anchors

Stone Grip-Tie

Construction Tie Products, Inc.

is Proud to Be AN AMERICAN COMPANY