CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the...

22

Transcript of CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the...

Page 1: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 2: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 3: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 4: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 5: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 6: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 7: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 8: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 9: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 10: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 11: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 12: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 13: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 14: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 15: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 16: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 17: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 18: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 19: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 20: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 21: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the
Page 22: CT6A manual2 ENGLISH VERSION...2.Insert the matching lines to the channel Bat port of the receiver.(Figure.1ÿ 0 3.Connect the receiver battery to any one of the channel port, on the