www.brettmartin.com

Plastic Sheets

APPLICATIONS

CSTB APPROVED POLYCARBONATE SHEET PROFILES

CONSTRUCTIONGLAZING AGRICULTURE

Marlon CS Longlife CSTB approved corrugated polycarbonate sheet is fully compliant with French building regulations, Avis Technique. The approval relates to Marlon CS Longlife sheet which has been designed especially to match the profi les of the four main steel roofi ng manufacturers in France. The material is robust and lightweight and allows up to 90% natural light transmission making it the ideal solution for a variety of sports, domestic, horticultural and industrial applications.

• Thicknesses: 1mm

• Tints: Clear

• Protective Coatings: Double sided UV protection

OPTIONS

• Roofl ights

• Cladding

APPLICATIONS

MAIN BENEFITS

• CSTB Approved

• Comply with French building regulations

• Excellent Light transmission

• Damage and impact resistant

• 200 times stronger than glass

• Retains optical clarity over time

• Performs well in extreme temperatures

• Light in weight, easily handled and installed

• Weatherable, Longlife UV Protection

• 10 year light transmission warranty

• 3 year weather breakage warranty

• Excellent fi re performance

Tel +44 (0) 28 9084 9999Fax +44 (0) 28 9083 6666mail@brettmartin.com

www.brettmartin.com

REMEMBER

Plastic Sheets

WARRANTY

CSTB APPROVED PROFILES

Support centres depend on sheet thickness and wind loading. The most commonly requested sheet widths have been used for illustrative purposes.Other sheet thicknesses and widths are available. For information on a specifi c project please contact our technical department.

SUPPORT CENTRES AND COVER WIDTHS

(Wind load of 1.0kN/m2 assumed)

PROFILE SHEET THICKNESS SUPPORT CENTRES

SHEET WIDTH COVER WIDTH

P1031 Nervesco 1000 1.0mm 1.2m 1050mm 1000mm

P1068 Haciero 3.333.39T 1.0mm 1.07m 1043mm 1000mm

P1167 Cobacier 1004 1.0mm 1.12m 1035mm 1000mm

P1472 Nergal 1000 1.0mm 1.17m 1048mm 1000mm

PHYSICAL PROPERTIES

PROPERTIES TEST METHOD VALUE UNITS

Mechanical Properties Tensile strength at yield DIN 53455 >60 MPa

Tensile Strength at break DIN 53455 >70 MPa

Elongation at yield DIN 53455 6-8 %

Elongation at break DIN 53455 >100 %

Modulus of elasticity DIN 53457 >2300 MPa

Charpy notched impact strength DIN 53453 >50 kJ/m2

Physical Properties Specifi c gravity DIN 53479 1.20 g/cm3

Refractive index nD25 DIN 53491 1.586

Water absorption, 24h @23°C DIN 53495 0.35 %

Water permeability (thickness 1mm) DIN 53122 <2.28 g/m2

Thermal Properties Softening temperature Vicat ‘B’ DIN 53460 148 °C

Defl ection temperature, load 1.8IMPa DIN 53461 142 °C

Linear thermal expansion DIN 53752 6.8X10-5 m/m.K

Thermal conductivity DIN 52612 0.2 W/m.K

Maximum service temperature Permanent 100 °C

- no loading Short Term 130 °C

FIRE PERFORMANCE

TEST METHOD CLASSIFICATION

EN11925-2 B-s1,d0

(0.75mm – 2.0mm)

Marlon CS meets the following classifi cation

Classifi cation is subject to thickness.For further details please contact our technical department.

RoH

SC

om

plia

nt

HeavyM

etalFree

Marlon polycarbonate is also available in a range of mulitwall, fl at and corrugated multiwall sheet options. A range of accessories is also available. For further details please visit our website.

All reasonable care has been taken in the compilation of the information contained within this literature. All recommendations on the use of our products are made without guarantee as conditions of use are beyond the control of Brett Martin. It is the customer’s responsibility to ensure that the product is fi t for its intended purpose and that the actual conditions of use are suitable. Brett Martin pursues a policy of continuous product development and reserves the right to amend specifi cations without prior notice. Non standard and special options are subject to minimum order quantities. The photographs used are for illustration purposes only and simply indicate possible uses of Marlon CS corrugated sheet. Marlon is a registered trademark of Brett Martin Ltd.

P1031 P1068

P1167 P1472