CS6665 10 Optimtool GA

Using optimtool/ga in Matlab

1

Optimtool

Optimtool is an optimization tool with several

different applications, one of which is genetic

algorithms.

These slides are to show how to use optimtool

with two kinds of chromosomes:

Binary chromosomes

Double vector chromosomes

2

Function to Optimize

The goal of this optimization example is to

find the minimum for the following function.

Its plot is on the next slide:

Notice that the minimum ~-165 occurs at

x=~5.75

3

88.3595.71015.1759.401.12)( 2345 += xxxxxxf 88.3595.71015.1759.401.12)( 2345 += xxxxxxf

Optimtool

Optimtool is invoked by typing optimtool at the Matlab prompt. Once started, you will see the window on the next page:

Dont be intimidated by the complexity and the number of parameters of this window. Much of what we will use is the default.

Note also that on the right side of the window there are references for the various options. Selecting one of these options will expand the window to give further explanation of the option.

5

Optimtool Double Vector or Binary

Chromosome

A double vector chromosome is simply a row vector of n double values. These values can be thought of as genes. Thus 4 genes/chromosome means a double vector of 4 elements.

A binary chromosome is a k bit vector of binary values

Note that for this chromosome, genes are not actually delineated. In other words if one needed a chromosome with 4 genes of 2, 8, 9, and 7 bits each, then one would specify a 26 bit chromosome

7

Optimtool Double Vector

Chromosome

In order to use Optimtool as a genetic

algorithm solver, one must select ga

Genetic Algorithm in the solver box. (Next

slide)

8


Chromosome

When using double vectors, you dont have as much latitude compared to binary in how chromosomes change. Because a chromosome is made up of individual double precision values, crossover only occurs on the boundaries of the individual doubles. Mutation thus takes on more significance in terms of moving in the search space. This is especially true if your chromosome consists of a single double (gene).

10


Chromosome

Since in this problem, we have only one gene,

we will only have a single parameter and thus

fill in number of variables window with a 1

Note:

With Double Vectors, a chromosome is a row

vector whose length is the number of genes in a

chromosome.

11


Chromosome

Problem Segment (portion of the window labeled Problem

In this segment, one specifies a m-file that is to be used as a fitness function and the number of variables. You must create the m-file in your Matlab workspace or working directory and reference it in optimtool as

@m-filename

In the definition of the m-file, for this example there will be one passed parameter, namely a row vector of a single double representing the chromosome.

The m-file must return a scalar. The Matlab GAs goal is to find the minimum of the fitness function.

12

Question

Since Optimtool only works to find the

minimum could you use it if the fitness

function was for a maximum?

Yes, simply use 1/fitness

If fitness can go to zero, then you might want to

use 1/(1+fitness)

Of course if fitness can be -1, then that solution

wont work, and another must be used.

13


Chromosome

On slide 3 we defined the fitness function. The following is the m-file (with no documentation) for that fitness function.

function [ funval ] = polyVal( X )

%

funval= X^5-12.1*X^4+40.59*X^3-17.015*X^2

-71.95*X+35.88;

end

For the preceding m-file fitness function, you would type @polyVal in the fitness function window.

14

Fitness Function

Note that in optimtool the fitness function is defined without parameters while in the Matlab definition, the parameter X is shown.

This means that in your Matlab workspace there must be only one function with that name.

If you have a chromosome with say 10 genes, then polyVal will still be defined as an m-file with one parameter. The difference is that in the function you must recognize that what is passed is really a vector (X) with 10 elements.

15


Chromosome

Constraints

There are several options for setting constraints. In essence what they allow you to do is restrict the range of values that each of the genes can have.

For a three gene chromosome [x1 x2 x3] consider the following constraints:

-5.5


Chromosome

In this case, it would be simplest to use the lower and upper bounds boxes. In doing this, you have two choices. Define two vectors in your work space and refer to

them in the windows, or define the vectors in the window.

Vectors in the Matlab work space

>> low=[-5.5;10;-15];

>> upp=[7.6 ;25; -7.6]

And then in the upper and lower windows type low and upp respectively

17


Chromosome

In this example problem, it would be simplest

to use the lower and upper bounds boxes.

To specify the bounds in the windows type

[-5.5;10;-15] in the window labeled Lower: and [7.6;

25; -7.6] in the window labeled Upper:

18


Chromosome

For our problem, we have only one

gene/chromosome. Also, looking at the figure

of slide 4 you can see that the range is

(approximately) -1.5 to 6.75. Thus,

you can simply type [-1.5] and [6.75] in the upper

and lower windows.

19


Chromosome - OPTIONS

Even though the next portion of the optimtool

window is the Run solver part, you must first

set the options in the right hand side of the

optimtool window.

Population

Population type: this should be Double Vector

Population size: you can leave it at the default of

20 chromosomes or specify a larger population

size in its specify: window.

20



Creation function

Here you can use constraint dependent or feasible

population. Either will operate the same (see the

reference)

Initial population

Leave this blank so that optimtool creates the initial

population

Initial scores leave this blank so that optimtool

will calculate the fitness for the initial population.

21



Initial range: - IMPORTANT If you use the default, then your initial range for the

randomly chosen vectors and each gene will be [0;1]. In this case you should specify the initial range as the same as the lower and upper bounds, i.e. [-1.5;6.75]

Scaling: default or experiment

Selection: Default or experiment

For all of the rest, you can use the default, expect you should also experiment.

Note: The generations under stopping criteria should generally be set higher than 100.

22



Once parameters, etc. have been set, select start

in the Run solver window.

In this example, for the plot window I chose a

plot interval of 10 and best fitness and best

individual.

The next two slides shows a run.

23

Double Vector Example

Although hard to read, in the window of the preceding slide there are three outputs to note: Current iteration 51 (Since we have stopped, this the

number of iterations of the GA required to arrive at this value)

In the window we see

optimization running

objective function value: -165.9.

Optimization terminated, average .

In the bottom box labeled final point is the value of the chromosome that gave the best (minimum) fitness of 165.9

26

Double Vector Example

It should be noted that there is a bug in the Matlab Ga/Optimtool. Specifically, if you use the default population size, the routine always stops at 51 generations. The fact that it says it stopped because of no change in the fitness is not necessarily correct.

In order to not always stop at 51 iterations you must specify stall generations as other than 50 and a population size other than the default of 100

27

Optimtool Binary Chromosome

In general, a binary chromosome allows some

additional flexibility in searching the space.

For example, crossover is no longer

constrained to occur on gene boundaries. It

can occur within genes.

Binary chromosomes also require a few

different initial settings and a significantly

different fitness function.

29

Binary Chromosome Fitness Function

As noted on slide 7, the number of bits in a

chromosome is the sum of the number of bits

in each gene, but how many bits are needed

in each gene?

The number of bits needed in each gene is

dependent on the range of values for that

gene, and resolution desired.

30

Binary Strings in Matlab/Optimtool

When you specify a binary vector, you specify

the number of bits as the total number of bits

in all of the variables.

As far as optimtool is concerned, a chromosome is

just a string of bits. It is up to the writer of the

fitness function to separate these bits into

individual genes and then evaluate the genes, i.e

convert them into decimal values.

31

Binary Chromosome Vector Example

Lets say that we have three genes, a

resolution for each gene of 0.1, and each gene

has a range of values of:

Gene 1: -1 to 1 => 2/0.1 = 20 values or 5 bits

Gene 2: 10 to 20 => 10/0.1 = 100 values or 7 bits

Gene 3: -100 to 10 => 110/0.1 = 1100 values or 11

bits

Thus, total gene size is 23 bits.

32

Binary Chromosome Vector Example

We will assume that the fitness is simply the

sum of the values of the individual genes.

What this means is that our optimum will be a

gene of all 0s.

In the m-file that calculates the fitness, we will

need to convert the 23 bit string into 3

equivalent decimal values.

33

Optimtool/Matlab Binary Strings

In Optimtool, if you specify, under population

type, a binary string(vector), and under the

number of variables 23, then each string is a

random string of 23 bits, e.g. it is of the form

String=[1 0 1 0 0] % for a total of 23 bits The

next two slides show how to extract a portion of

such a string to get a particular genes decimal

equivalent value.

34

Optimtool/Matlab Binary Strings

The actual fitness function would call

ConvertPortionToBinary for each of the genes in

the chromosome.

Finally, the fitness function would simply, for the

fitness of the given chromosome, return the sum

of these individual gene values.

Obviously, for most problems, the fitness function itself

would need to perform a more complicated function.

35

function [ output ] = ConvertPortionToBinary( input_string, position, number_of_bits )%Takes a binary row vector (input_string) as input and% converts it to its decimal equivalent.% position is where in input to begin the conversion% number_of_bits is the number of bits starting at position to convert% The decimal equivalent is output in the parameter output

output=0;% We begin by extracting from the total string the individual bits that are% neededportion = input_string(position:position+number_of_bits-1);% Since the string portion is of the form [1 0 1 1 0 ...], we need to% compact it so the spaces between binary digits is removeds = strrep(int2str(portion),' ','');% And finally, this parts creates in output the actual decimal equivalentj=1;L=length(s);while(j

Binary Chromosome Bits in Gene for

Single Gene Example

In this problem, there is only one gene, and its

values range from -1.5 to 6.75.

Lets say we want a resolution of at least 0.01

That means there must be at least 8250 values in

the range -1.5 to 6.75

6.75 (-1.5) = 8.25

For a resolution of at least 0.01 which is 1/100, we

need at least 8.25(100) = 825 values.

37

Binary Chromosome Bits in Gene

What the preceding tells us is that we need a

binary string that has at least 825 different

values. Thus we need a binary string of at least 10

bits since 210 = 1024 > 825.

Remember that the actual decimal equivalent values

of this string will be 0 to 1023

That means our conversion from a binary string

to a float will be:

dec_val=8.25(DecimalValueofString/1023)-1.5

38

Binary Gene Fitness Function

The fitness function for this example must

Convert the binary string to its floating point

equivalent (this will be x in the function on slide 3)

Substitute this value into the polynomial on slide 3

and evaluate the polynomial

Then return this value as the fitness

39

Binary Chromosome

What if we want to maximize a fitness function f(x)?

Although Optimtool only finds a minimum, it can still be used.

Instead of returning f(x), return 1/f(x)

Remember that if f(x) can be 0, you must not allow this to happen, e.g. 1/(1+f(x))

The next slide shows the fitness function for the single gene example.

40

function [ fitness ] = CalculateFitness(Bstring)

% Takes a binary row vector (Bstring) as input

% This string is 10 bits and hence 0 to 1023 in decimal

% Converts the vector to a decimal number in the

% range -1.5 to 6.75 6.75-(-1.5) = 8.25

[DecimalValue]=ConvertBinary(Bstring)

DecimalValue=8.25*(DecimalValue/1023) - 1.5

fitness= DecimalValue^5-12.1*DecimalValue^4+40.59*...

DecimalValue^3-17.015*DecimalValue^2-71.95*DecimalValue+35.88;

end

function [ output ] = ConvertBinary( input )

%Takes a binary row vector as input

%Converts it to its decimal equivalent.

output=0;

s = strrep(int2str(input),' ','');

j=1;

L=length(s);

while(j

Fitness Function

Note that the previous fitness function called

the function ConvertBinary.

The file in which CalculateFitness is stored is

called CalculateFitness

42

Example Continuing

Now, as before, the first step is to select ga

Genetic Algorithm in the Solver box

43


Next you must assign a fitness function and

specify the number of variables.

In this case the name of the function is

CalculateFitness (slide 41) and the number of

variables is the number of bits in a chromosome

which was calculated on slide 38 as 10 bits

Note: dont forget the @ in front of the fitness

function name

45


Because this is a binary chromosome, you dont need to specify any constraints.

In the options segments specify:

Population type: Bit string

Population size: 50 (as an example)

Creation function: uniform

Generations: 500 (as an example)

Stall generations: 500 (as an example)

Other options: default

47


Now you are ready to run the ga

Click on the Start button in the run solver segment

The result is shown as before on the next

slide.

Notice that at the bottom of the slide the final

(optimum) point is given in decimal.

49

Result

From the previous slide, the actual (binary)

chromosome value was displayed as:

1101111100. Thus the decimal value of x for

the best fitness is:

11011111002 = 89210

8.25(892/1023)-1.5 = 5.69

51

Homework 4

All of what has been shown for the Binary

chromosome works for homework 4 with one

variation.

Note that in this homework the fitness

calculation will need to be different.

In the preceding example, the equation for the

fitness function was already parameterized and

you were looking for a single value of x

52

88.3595.7101.1759.401.12)( 2345 += xxxxxxf

Homework 4

In Homework 4 you have multiple variables, i.e. A-

F and your function is not parameterized

Also, to calculate the fitness, you need the H4Data

table

53

Homework 4

There are multiple ways of addressing this

problem:

Embed H4Data as a declared array in your fitness

function

If H4Data is already a matrix in your Matlab work

space, you can sort of pass H4Data directly to your

fitness function

Rather than declaring a fitness function in the fitness

function window as:

@CalculateFitness

54

Homework 4

Rather than declaring a fitness function in the fitness function window as:

@CalculateFitness

Declare it as

@(X)CalculateFitness(X,H4Data)

The assumption is that H4Data already exists in the Matlab workspace

You also now need to alter the CalculateFitnessdeclaration to be CalculateFitness(X,H4Data)

55

CS6665 10 Optimtool GA

Documents

Transcript of CS6665 10 Optimtool GA