CS148: Introduction to Computer Graphics and Imaging Scanline Rendering
description
Transcript of CS148: Introduction to Computer Graphics and Imaging Scanline Rendering
1/45
CS148: Introduction to Computer Graphics and Imaging
Scanline Rendering
Electric Sheep screensaver by Scott DravesImage created collectively by users on the internet
2/45
Human Eye
Light comes from light sources, is absorbed and reflected off of objects, and goes through the pupil of the eye.
3/45
Without the pupil light scatters everywhere and does not make a coherent image
4/45
With a pinhole model of the pupil light makes a coherent image inside the eye
5/45
Human Retina: Rods and conesRetina contains rods and cones Rods are responsible for light intensity Cones are responsible for color vision
6/45
Three Types of Cones
From http://webvision.med.utah.edu/imageswv/fovmoswv.jpeg
7/45
Rods Capture Intensities
8/45
Color Matching ExperimentAdjust brightness of three primaries Lasers: R = 700 nm, G = 546 nm, B = 435 nmuntil a human mistakenly thinks it matches another color
C = x nm
Result: all colors can be matched with three colorsTherefore: humans have trichromatic color vision
C = R “+” G “+” B
9/45
Trichromatic Theory• Since the human eye works in this fashion, we work this way with images, printers, and displays.• Image formats store values in the R, G, and B channels. • The values are between 0 and 255.• The relative values give the color, and the overall values give the intensity. • This is similar to the cones of the human eye.
• The monitor can be used to increase or decrease the image intensities (brightness/darkness).• This is similar to the rods of the human eye.
10/45
Cameras•A camera works similarly to the eye.■ Light passes through the lens, bends to
come to a point of focus, and makes an upside-down image on the film.
11/45
Pinhole Camera
Linear perspective with viewpoint at pinhole
12/45
Laws of Pinhole CamerasCommon assumptions
Light leaving an object travels in straight linesThese lines converge to a point (e.g. pinhole) Infinite depth of field which means everything is in focus
Perspective image is formed by the intersection of these lines with an image plane
More distant objects subtend smaller visual angles and appear smaller
Objects in front occlude the objects behind them
13/45
OpenGL Camera
OpenGL uses a pinhole camera. In OpenGL the image plane is in front of the focal point which means the image is right side up. The frustum is the volume of our view (shown in blue below). The image plane is the plane of the frustum nearest to the camera.
14/45
Specifying the Camera in OpenGL
void gluLookAt(eye.x, eye.y, eye.z, at.x, at.y, at.z, up.x, up.y, up.z);- gluLookAt creates a camera from an eye point, a reference point indicating the center of the scene, and an up vector.
15/45
Specifying the Frustum in OpenGL
void gluPerspective(fovy, aspect, near, far);
-gluPerspective specifies a viewing frustum for the camera into the world coordinate system. -fovy specifies the field of view angle.-aspect specifies the aspect ratio of the associated image plane.-near/far specify the distance from the camera to the new/far clipping plane.
16/45
Drawing a Triangle in front of your Camera
glColor3f(1.f,0.f,0.f);glBegin(GL_TRIANGLES);glVertex3f(0.f,0.f,0.f);glVertex3f(1.f,0.f,0.f);glVertex3f(.5f,.86f,0.f);glEnd();
void glBegin(Glenum mode);•glBegin delimits the vertices of a primitive.•mode specifies the primitive that will be created from vertices presented between glBegin and glEnd.
void glVertex(x,y,z);•glVertex specifies a vertex to form the primitive.
17/45
Fundamental Primitive: Triangles
• Why triangles?• Lowest common denominator■ Easily break convex polygons
into triangles■ Optimize the implementation
of one primitive■ Triangles have unique
properties■ Guaranteed to be planar■ Guaranteed to have a well-defined
interior■ Well-defined method (barycentric
interpolation) for interpolating values in the interior
18/45
Triangle Meshes
Stanford Bunny69,451 triangles David, Digital Michelangelo Project
28,184,526 vertices, 56,230,343 triangles
19/45
OpenGL Drawing Primitives
Geometric Shapes
Bitmaps Images
20/45
Graphics Rendering Pipeline
Per-vertex ops
Rasterization
Per-fragment ops
Texturing
Vertices
Shadedfragments
Fragments
Transformedvertices
Frame buffer ops
Display
Commands Processor
pixels in the framebuffer
triangles, lines, pointsimages
Primitive assemblyPrimitives
21/45
Command queueCommand interpretationUnpack and perform format conversionMaintain graphics state
Command Processor
glBegin(GL_TRIANGLE_STRIP);glColor3f(.0f, 1.f, .0f);glVertex3f( .0f, .0f, .0f ); glVertex3f( 0.f, 1.f, .0f ); glColor3f(1.f, .0f, .0f);glVertex3f( 1.f, .0f, .0f ); glVertex3f( 1.f, 1.f, .0f ); glEnd();
22/45
Vertex transformationNormal transformationTexture coordinate generationTexture coordinate transformationLighting (light sources and surface reflection)Projection
Per-vertex Operations
World-space triangles
Screen-space shaded triangles
23/45
Primitive Assembly
Combine transformed/shaded vertices into primitives■ 1 vert -> point■ 2 verts -> line■ 3 verts -> triangleClippingTransform to window coordinates (viewport)Determine orientation (CW/CCW) Back-face cull
24/45
Setup (per-triangle)Sampling (triangle = {fragments})Interpolation (interpolate colors and coordinates)
Rasterization
Triangles Fragments
25/45
Textures are arrays indexed by floats (Sampler)Texture address calculationTexture bilinear interpolation and filtering
Texturing
Fragments Texture Fragments
26/45
Per-fragment Operations
Combine texture sampler outputsPer-fragment shading
Fragments Textured Fragments
27/45
Operation■ Test window ownership■ Test scissor and stencil mask■ Test alpha■ Test depthBlending or compositing
Frame buffer Operations
Textured Fragments Framebuffer Pixels
28/45
Testing Depth using Z-Buffer
Initialize z-buffer to zmax
Interpolate z across the triangle Draw fragment if closer
if(frag.Z<Z[frag.X][frag.Y]){ Z[frag.X][frag.Y]=frag.Z; C[frag.X][frag.Y]=frag.C;}
http://en.wikipedia.org/wiki/File:Z_buffer.svg
29/45
Frame BufferingFrame Buffer■ Store image in a buffer to separate refresh
rate from drawing rateSingle-buffer■ Draw into display buffer directly■ May see picture being drawnDouble-buffer■ Display “front” buffer ■ Draw into “back” buffer (can’t see drawing)■ Swap front and back (wait until vertical sync)Triple buffer■ Avoid waiting for vertical sync
30/45
FramebufferExample Framebuffer: 1440 x 900
All coordinates are integers; they refer to pixel locations in the framebuffer
31/45
WindowExample Framebuffer: 1440 x 900
The window is the portion of the display usable by the application(under control of the “window system”)
All coordinates are integers; they refer to pixel locations in the framebuffer
Window(512 x 512)
32/45
ViewportExample Framebuffer: 1440 x 900
Viewport(256x256)
All coordinates are integers; they refer to pixel locations in the framebuffer
The viewport is the portion of the window that can be drawn in,no pixels will appearoutside the viewport
Window(512 x 512)
33/45
Specifying the Viewport in OpenGL
void glViewport(x, y, w, h);-glViewport specifies the location and the size of the viewport in the screen coordinate system. Here x, y, w, and h are all integers.-x and y specify the lower left corner of the viewport rectangle.-w and h specify the width and height of the viewport. w/h should agree with the aspect ratio you set in gluPerspective.
34/45
Windows = Virtual Framebuffers
Like virtual memory enables us to share the physical memory,
virtual framebuffers allows us to share the physical framebuffer
Abstract properties■ Location and size on the screen■ Stacking order
35/45
Window Coordinate Systems
Window(512 x 512)
Each window has a user coordinate systemA 2D coordinate system is specified by assigning coordinates to the edges of the windowleft need not be less than right ...
right = 1.0left = -1.0
bottom = -1.0
top = 1.0
36/45
Exposure
Parts of the window that are not visible can become visible■ When opening■ When unhiding■ When brought to front
How do you update the visible parts of the window?■ Redraw entire window (or a part of it)■ Save the drawn window in a “backing store”, and copy onto screen when needed
37/45
Display
Gamma correctionAnalog to digital conversionDisplay
LightFramebuffer Pixels
38/45
glBegin(GL_TRIANGLES) glVertex3fv(v1); glVertex3fv(v2); glVertex3fv(v3);glEnd()
-90
-90
OpenGL GPU
CPU
39/45
Graphics processing unitA graphics processing unit (GPU), also occasionally called visual processing unit (VPU), is a specialized electronic circuit designed to rapidly manipulate and alter memory to accelerate the building of images in a frame buffer intended for output to a display.
NVIDIA’s GeForce GTX 690
VisionTek Radeon 7970
40/45
What’s in a GPU?
ShaderCore
TexRasterizer
Framebuffer Ops
Work Distributor
Primitive AssemblyShaderCore
ShaderCore
ShaderCore
ShaderCore
ShaderCore
ShaderCore
ShaderCore
Tex
Tex
Tex
41/45
Modern PC
3.0 Ghz Intel Core2 Duo
NVIDIA GeForce8800 GTX (575 MHz)
(16 cores)
512MBvideo
Memory(GDDR3)
4MB L2 Cache
2GB mainmemory(DDR2)
Core 1 Core 2
NVIDIA 8800GTX
PCIe Bus (v1 = 4 GB/sec)
84 GB/sec
System board (Intel D975) 12.8 GB/sec
42/45
Game Machines – Xbox 360
3.2 Ghz PowerPC CPU
Core 1 Core 2 Core 3
500 Mhz ATI GPU 512 MBmemory
L2 Cache
IOChip
48 3DCores Video
out
Framebuffer
Display (TV)
controllers/ethernet/audio/DVD/etc.
43/45
Game Machines – PS3
3.2 Ghz CellPPCCore
SPU0
550 Mhz NVIDIA RSX GPU 256 MBvideo
Memory(GDDR3)
L2 Cache
IO Chip
Multiple 3Dcores Video
out
Display (TV)
controllers/ethernet/audio/DVD/etc.
SPU1 SPU2 SPU3
SPU4 SPU5 SPU6 SPU7 256 MBMemory(XDR)
44/45
Hybrid CPU-GPUs
Intel Sandybridge
Apple A5
45/45
NVIDIA GPU PerformanceYear Product Triangle/s Fragment/s1998 Riva ZX 3m 100m1999 Riva TNT2 9m 350m2000 GeForce2 GTS 25m 664m2001 GeForce3 30m 800m2002 GeForce Ti 4600 60m 1200m2003 GeForce FX 167m 2000m2004 GeForce 6800 Ultra 170m 6800m2005 GeForce 7800 GTX 940m 10300m2006 GeForce 7900 GTX 1400m 15600m2007 GeForce 8800 GTX 1800m 36800m2008 GeForce GTX 280 48160m2010 GeForce GTX 480 42000m2011 GeForce GTX 580 49400m