CS Unitec Catalog - CS Unitec Catalogo Sierras Portatiles

NotJustSEO

Textbox

http://www.csunitec.com/spanish/concretesaws/sierra.html

http://www.csunitec.com/spanish/concretesaws/sierra.html

Portable Saws & AccessoriesPortable Saws & AccessoriesHeavy-duty Saws… Fast, accurate cutting on the job site!

SPEC

IAL

FEA

TURE

S A

ND

BEN

EFIT

S

2 • 1-800-700-5919 • Visit our Web site at www.csunitec.com

CS Unitec's portable saws and tools are ideal for cutting pipe, structural steel, tanks,bolts, angle iron, concrete and other materials, including plastic and wood. We offerthe widest range of portable pneumatic, electric and hydraulic saws in the industry.

Our saws can be used as hand-held tools or with an assortment of clamps for pipeand other materials. All CS Unitec saws are heavy-duty for use in industry andconstruction. Our complete saw line includes pneumatic-, electric- and hydraulic-powered tools, saw blades and accessories, all available for prompt delivery.

CS Unitec is the industry leader in:• Portable saws for cutting pipe, metal, concrete, etc.• Compact, lightweight, hand-held and clamp-mounted saws• The best power-to-weight ratios• Long-lasting, heavy-duty saw blades for fast cutting of steel, stainless steel,

Inconel, chrome, Hastelloy, aluminum, iron, plastics, masonry, concrete andother materials

We offer:• Pneumatic-, electric- and hydraulic-powered saws• Clamps for 90˚ cutting of pipe, structural steel and other materials• Compact sizes for sawing in confined spaces

Tool and Accessory Index:

Portable Band Saws p. 18-21Pneumatic

4 3/4" capacity p. 197" capacity p. 19

Electric4 3/4" capacity p. 207" capacity p. 20

Hydraulic4 3/4" capacity p. 207" capacity p. 20

Band Saw Blades and Accessories p. 21

Portable Reciprocating Saws p. 4-13Pneumatic – Low Air Volume

PL905 (for high-volume production environments) p. 5CL50/CL75 (for demanding maintenance apps.) p. 6JP901 (for fiberglass and sheet metal production) p. 7

Pneumatic1.3 HP – The CAT p. 101.6 HP – The WOLF p. 11

Hydraulic2 HP – The SHARK p. 12

Electric - The FOX9.5 Amp, 12 Amp p. 12

Reciprocating Saw Blades p. 13

Nibblers p. 30

AirPac p. 29

Lubricants p. 29, 31

Warranty p. 31

Concrete Saws p. 24-28Chain Saws

Pneumatic p. 24-25Hydraulic p. 24-25Accessories p. 26About Diamond Chain Life p. 27

Cut-off14" and 18" Pneumatic Hand-held p. 2820" Pneumatic Walk-behind p. 28

Chain Saws p. 22-234 HP Pneumatic p. 221.2 HP Pneumatic p. 23Saw Chains and Accessories p. 23

Portable Hacksaws p. 14-17Pneumatic, Electric & Hydraulic p. 14-15Hacksaw Accessories p. 16Hacksaw Blades p. 17

Selected air andhydraulic models in our line are ATEXCertified for working in Ex Zones. Contact us for more information.

ATEX CertifiedATEX Certified

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Choose your Power…

Choose your Cutting Method…

Pneumatic-powered Saws• ATEX Certified for

use in hazardous areas (selected models)

• Reliable and require less maintenance• High power-to-weight ratios

Electric-powered Saws• Ideal for heavy-duty cutting applications

in industry and construction• Simple and easy to use• Available in 110 Volt/60Hz or 220 Volt/50Hz

Track-mountedWe offer a variety of clampsfor applications that requirethe saw to be stable.

Hand-heldWe lead the industry in ruggedportable saws that are ideal forfree-hand cutting applications.

90˚ with Pipe ClampsOur portable saws are ideal forright-angle cutting of pipe andstructural steel using chainclamps or vise-on clamps.

Choose your Heavy-duty Blades and Chains…

Heavy-duty Thick90˚ cutting with a clamp is easywhen you use our heavy-dutythick blades.

Chains and BladesWe offer diamond chains, carbidechains and chisel chains, as wellas diamond saw blades, for a widevariety of sawing applications.

Special Features and BenefitsSpecial Features and Benefits

SPEC

IAL

FEA

TURE

S A

ND

BEN

EFIT

S

3

ReciprocatingOur extensive blade lineincludes a complete range ofblades for reciprocating saws.

Hydraulic-powered Saws• Utilized for special cutting

situations, such as underwater• Ideal for professional sawing

and drilling applications wherehydraulic power is the norm

• ATEX Certified (selectedmodels)


REC

IPRO

CA

TIN

GSA

WS


Reciprocating Air SawsReciprocating Air Saws

PL Saws - For High-volumeProduction Environments p. 5

CL Saws - For DemandingMaintenance Applications p. 6

JP Saws - For Fiberglassand Sheet Metal Production p. 7

Cengar Air Saw Blades

HB300/18HB300/24HB300/32MC220/24MYN150/18MYT150/18

HandHandHandMachineNotched YellowTapered Yellow

18 TPI24 TPI32 TPI24 TPI18 TPI18 TPI

12" L12" L12" L81/2" L6" L6" L

1/2" Wide Bi-metal Blades (for CL50, JP901 and PL905)

MB150/18MB200/10-14MB200/18MB200/24MB250/18MB250/24MB300/10-14MB300/18

MachineMachineMachineMachineMachineMachineMachineMachine

18 TPI10/14 TPI18 TPI24 TPI18 TPI24 TPI10/14 TPI18 TPI

6" L8" L8" L8" L10" L10" L12" L12" L

3/4" Wide Bi-metal Blades (for CL75)

Compact, Quiet & ReliableLow Vibration/Low Air VolumeCut Pipe, Structural Steel, Sheet

Metal, Fiberglass, Plastic and More.

• Piston air motors use low air volume (CFM)while maintaining a fast cutting speed (2000to 10,000 strokes per minute)

• Safe around gas and other flammablematerials; recommended for fire and rescueapplications where high CFM isn't available

• ATEX Certified – for use in hazardous areas• CL and PL saws use standard hand hacksaw

blades; convert to a 3/4" blade size simply bychanging the nosepiece

• Rugged saw bodies constructed of heavy-duty cast steel and aluminum

• Built-in lubrication system automaticallylubricates the motor

• Safety STOP/Isolator button disconnectsair supply

Lubricating Oils (see p. 29)• ProLube™ is a super-premium, low-viscosity

synthetic air tool lubricant

• ProLube-ATL/AF is a special blend preventingfreezing in cold climate conditions

MS Cleaner (MS 9105)• An ideal conditioner for air tools used underwater


ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications

Cuttercapacity 11/4" dia.

REC

IPRO

CA

TIN

G S

AW

S

5• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Reciprocating Air SawsReciprocating Air SawsIdeal for cutting pipe, metals, fiberglass and more

Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)

1 HP7/8"

20005 1/4 lbs.

113/4" x 51/4" x 15/8"4 CFM90 PSI

1/4" NPT1/4" ID

691.73

Model PL905

Low Vibration • Low Noise• Ideal for high-volume production applications

such as cutting steel, repairing wooden pallets,building and repairing truck bodies and cuttingfiberglass

• Also widely used by oil and gas contractors andfire rescue services

• Sturdy cast steel and aluminum saw body

• Low air volume – only 4 CFM

• 7/8" blade stroke, up to2000 strokes per minute

• Fitted with easy-to-useSTOP/Isolator button onthe handle for safety whenchanging blades

• Uses any 1/2" (12mm) wideBi-metal hand, machine oryellow blades

Model PL905Sturdy air saw for continuous use

Standard Equipment:carrying case, fiveMC220/24 saw blades,air tool oil, CD operatingmanual, allen key.

Cengar Saw Blades and Accessories (see page 4)

• 1/2" wide Bi-metal Blades suit a wide range of applications


Cut Sheet Metal

Cut Nails

REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air SawsIdeal for cutting metal, timber and fiberglass

Low Vibration • Low Noise• Workhorses for use in the fabrication,

shipbuilding, ship repair, oil andpetrochemical, boat building andaircraft maintenance fields

• Also utilized by fire and rescueprofessionals

• 13/4" blade stroke, up to 1200 strokesper minute

• Fitted with easy-to-use STOP/Isolatorbutton on the handle for safety whenchanging blades

• CL50 uses any 1/2" (12mm) wide Bi-metal hand or machine blade andcan be easily converted to a CL75 bychanging the nosepiece

• CL75 uses a 3/4" (19mm) wide Bi-metal machine blade

Standard Equipment: carrying case, five MC220/24 saw blades, air tool oil,CD operating manual, allen key.


1 HP1 3/4"1200

51/2 lbs.153/4" x 51/4" x 15/8"

53/4 CFM90 PSI

1/4" NPT1/4" ID

833.69

Models CL50 & CL75

Models CL50 & CL75Rugged air saws for versatile applications



• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications

• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075



REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air SawsIdeal for cutting fiberglass, light-gauge metal & fiberboard

Low Vibration • Low Noise• Ideal for cutting fiberglass,

light-gauge metal and fiberboard up to 3/8" (10mm) thick

• Utilized by boat builders and in theconstruction and repair of car, bus and truck bodies

• Low air consumption – only 4 CFM

• 3/8" blade stroke, up to 10,000 strokesper minute

• Has automatic lubrication and an easy-to-use STOP/Isolator button on thehandle for safety when changing blades

• JP901 uses any 1/2" (12mm) wide Bi-metal hand, machine or yellowblades and can be easily converted to use 3/4" blades by simply changingthe nosepiece

Standard Equipment: carrying case, five MYN150/18saw blades, five MYT150/18 saw blades, air tool oil,CD operating manual, allen key.


1 HP3/8"

10,00031/2 lbs.

103/4" x 23/4" x 15/8"4 CFM75 PSI

1/4" NPT1/4" ID

691.23

Model JP901

Model JP901Speedy, lightweight air saw for repair and construction environments



• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications

• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075

REC

IPRO

CA

TIN

G S

AW

S

8

Portable Reciprocating SawsPortable Reciprocating Saws


The most powerfulin the industry!

Hand-held or clamp-on cuttingin tough environments

Pneumatic • Hydraulic • Electric Ideal for a wide range of industries,

including subsea, gas utilities,offshore oil, petrochemical, power

generation, industrial plantmaintenance and construction

• Fast cutting of pipe, structural steel,bolts, nails, pallets and other material

• The best power-to-weight ratios in the industry

• Compact size allows cutting inconfined spaces

• ANC gear drive reduces friction andincreases gear life and power output

• Cut steel pipe and channel up to 6" dia. (or plastic pipe up to 8" dia.)

• 90˚ cuts with optional clamps

The CAT - 1.3 HP PneumaticReciprocating Saw p. 10

The WOLF - 1.6 HP PneumaticReciprocating Saw p. 11

The SHARK - 2 HP HydraulicReciprocating Saw p. 12

Pipe Clamps for 90˚ CuttingCut faster by increasing

your leverage 5xwhile safely

securing thesaw with our

Pipe Clamps.

Pipe Clamp for Pipes & Profiles

1/2" - 2" Pipe Vise Clamp – Model No. 259.9832 1/2" - 4" Pipe Vise Clamp – Model No. 563.1001/2" - 6" Pipe Chain Clamp – Model No. 251.259

The FOX - 9.5 and 12 AmpElectric Reciprocating Saws p. 12

Two Models:Spade (below) or D-handle(right) available.

90˚Model No. CP1 Universal Clamp• Easily attaches to recip saws and

portable hacksaws for 90˚ cuts intight spaces

• Self-aligning feet adjust tothe form of the workpiece(round, square and angled)

• 1/2" to 6" capacity with recipsaws – see page 16 for usewith portable hacksaws


REC

IPRO

CA

TIN

G S

AW

S


The New Generation Gear HeadANC = All-round Needle-bearing Crank Drive

Reciprocating SawsReciprocating Saws

ANC Gear Drive: Low Friction • High TorqueThe new, unique design of the ANC gear:

• reduces friction and wear, resulting in lessheat and longer service life.

• resists dust and water, making the gear headmaintenance free.

• allows for aggressive high-torque cutting,providing good chip flow and long blade life.

CS Unitec's reciprocating saws cut faster and last longerthan other saws in their class.The ANC gear drive and heavy-duty air or electric motor provide the best power-to-weight ratio in the industry.

ANC geardrive

Ergonomicallyshaped

housing grip

Universal 1/2" tang, double-tang or M-Tooth blade moves in aggressive orbital action

Patentedsaw blade

mount

Patentedsquare lift rod

Powerful, heavy-duty pneumatic

or electric motor

Siliconegasket

Pipeclamp

connection

Reciprocating Saw Blades

Extremely versatile, CS Unitec'sreciprocating saws use the universal 1/2" tang or special double-tang saw blades (see page 13).Our extra-thick saw blades resist bending and cut pipe at right angleswith a pipe clamp.

In addition, CS Unitec's Mega SharpM-Tooth saw blades (see page 13) have a unique, patented tooth geometry that allows these blades to cut quickly with each stroke,forward and back, saving timeand money.

Standard BladesAll CS Unitec reciprocating saws can usethe widely available standard reciprocatingblades with the 1/2" universal tang.

Heavy-duty BladesThese blades are much thicker thanstandard blades and have a strongerdouble-tang mount for heavy-dutycutting, either free-hand or with a clamp.

M-Tooth BladesUnique tooth geometry allowsthese blades to cut in bothdirections – twice as fast!

Cut inBoth Directions!

REC

IPRO

CA

TIN

G S

AW

S


1.3 HP Pneumatic Reciprocating Saw1.3 HP Pneumatic Reciprocating SawIdeal for cutting pipes, structural steel, pallets and more

Saw Kit (5 1217 0060)includes saw, 6" pipe clamp,case and five No. 1001heavy-duty blades.

Model 5 1217 0020 includes carrying caseand two No. 1001 heavy-duty blades.

Reciprocating Saw Blades and Accessories (see page 13)

• Universal saw blades

• Thicker, heavy-duty double-tang blades for 90˚ cuts

• M-Tooth blades to cut onforward and back stroke

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.3 HP1 1/8"

0-18009 lbs.15 7/8"

46 CFM90 PSI

1/2" NPT (ID)Order Model 5 1217 0060

Model 5 1217 0020

Model 5 1217 0020Use hand-held or with a clamp

TheCAT

Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting

• Cuts steel pipe and channel 1/2" to 4" dia., plasticpipe to 8" dia.

• Ideal for the toughest use in refineries, chemicalplants, gas utilities, construction, offshore oil,mining, marine and demolition industries

• 1.3 HP air motor provides more power thanconventional air saws

• 11/8" blade stroke for fast, efficient cutting

• Can be mounted on a pipe clamp to make 90˚ cuts

• Variable speed of 0-1800 strokes per minute

• Accepts universal saw blades or thicker, heavy-duty double-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip

• One-year warranty




REC

IPRO

CA

TIN

G S

AW

S


1.6 HP Pneumatic Reciprocating Saw1.6 HP Pneumatic Reciprocating SawIdeal for cutting pipe, structural steel and other materials

• Cuts steel pipe and channel 1/2" to 6" dia., plastic pipeto 8" dia.

• Powerful 1.6 HP motor with reciprocating action for steel and long orbital stroke for cutting soft materialsincluding wood, plastic and aluminum

• Can be mounted on a pipe clamp to make 90˚ cuts

• 11/8" blade stroke for fast, efficient cutting

• Selector switch changes stroke setting to eitherstraight or orbital

• Variable speed from 0-2200 strokes per minute

• Accepts universal saw bladesor thicker, heavy-duty double-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip; sidehandle included


Saw Kit (5 6005 0060) includes saw, 6" pipeclamp, case, side handle and five No. 1001 heavy-duty blades.

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.6 HP1 1/8"

0-220010 3/4 lbs.

17 3/4" 51 CFM90 PSI

1/2" NPT (ID)Order Model 5 6005 0060

Model 5 6005 0010

TheWOLF

Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting






Shown with side handle

Selector switch forstraight or orbital stroke


Cuttercapacity 2" dia.

REC

IPRO

CA

TIN

G S

AW

S


Subsea, mining, utility and construction applications

The FOXmini hacksaws –

industry's most powerfulelectric recip saws!

Single Speed5 6002 0000Variable Speed5 6002 6000**5 6002 7000**

* 220 Volt also available ** 5 6002 6000 with speed control dial, 5 6002 7000 with variable-speed trigger.

9.5 Amp, 110V*

12 Amp, 110V*

9.5 Amp, 110V*

Power

2200

0-2200

0-2200

Strokesper Min.

StrokeLength

11/8"

11/8"

11/8"

Spade

Spade

D-handle

19"

19"

19"

Handle Style

6

6

6

Length Weight(lbs.)Model No.

Model 5 6002 7000 with D-handle variable-speed trigger.

Models 5 6002 0000 and 5 6002 6000with spade handle. Model 5 6002 6000has variable-speedcontrol dial.

Hydraulic Reciprocating SawHydraulic Reciprocating Saw

• Cut steel pipe and channel 1/2" to 4" dia., plastic pipe to 8" dia.

• Powerful 9.5 and 12 Amp motors,110 Volt/60Hz (or 220 Volt/50Hz)

• Ideal for plumbing and electricalcontractors as well as demolitionjobs, pallet cutting and more

• 11/8" blade stroke for fast cutting

• 0-2200 variable stroke speed for models 5 6002 6000 and 5 6002 7000





Standardequipmentincludes 2"pipe clamp(#259.983),

carrying caseand two No.1001 blades

Accept universalsaw blades orthicker, heavy-

duty double-tangsaw blades (see

page 13)

Motor PowerOil PressureOil FlowStrokes per Min.WeightHydraulic ConnectionHose ID*

* Hoses are not included

2 HP2000 PSI

6 GPM (up to 13)1700

13.2 lbs.M 18 x 1.5 Male

1/2" ID with 1/2" FF Couplings

Model 5 1219 0010

• Marine, mining, utility andconstruction applications

• Operate on 2000 PSI / 6 GPM(up to 13 GPM) hydraulic oil

• Cut wood up to 6" dia., metalup to 3/4" dia.


Electric Reciprocating SawElectric Reciprocating Saw

The SHARK


REC

IPRO

CA

TIN

G S

AW

BLA

DES

13

Reciprocating Saw BladesReciprocating Saw BladesSuper quick and precise for pipe, steel, plastic, etc.**Use ProLube™ Specialty Lubricants with your Reciprocating Saw Blades to help your

tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic andideal for stainless steel and hard metal cutting applications. See page 31 for details.**

No. 1001No. 1002No. 007D/200** 007D/200 has universal 1/2" tang • Ask for special blades to cut stainless steel.

Cuts pipe up to 2"Cuts pipe up to 4"Cuts pipe up to 4"

8 TPI8 TPIM-Tooth

6" L x 1" W x .060" T8" L x 1" W x .060" T8" L x 1" W x .050" T

Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*

General-purpose Bi-metal Saw Blades with Universal 1/2" Shank

No. 007/150No. 007/200No. 007/280

Metal 1/8" and ThickerM-ToothM-ToothM-Tooth

6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T

No. 006/150No. 006/250

Metal up to 1/8" ThickM-ToothM-Tooth

6" L x 3/4" W x .035" T7" L x 3/4" W x .035" T

Cast Steel, Ductile Iron, Ceramics and Glass Fiber ProductsNo. D12/200 Tungsten Carbide Coarse 8" L x 3/4" W

No. 1005No. 1003No. 1004

10/14 TPI10/14 TPI10/14 TPI

6" L x 1" W x .035" T8" L x 1" W x .035" T12" L x 1" W x .035" T

Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank

Made of tough, resilient steel with 10/14 variable tooth pitch. The large blade width and double-shank mountdeliver excellent cutting performance and durability.

Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank

CUTS TWICE AS FAST!M42 Bi-metal for cutting steel and stainless steel

The patented M-Tooth sawblade cuts 2x faster than ordinaryblades. The teeth are designedto cut on the forward and backstrokes, thereby saving time.

Cuts inBoth Directions!

No. 3013/150No. 3013/200No. 3018/280

Metal 1/8" and Thicker14 TPI14 TPI10 TPI


No. 3021/150No. 3021/225No. 3021/300

Plastic, Wood, Plasterboard6 TPI6 TPI6 TPI


No. 810C/150No. 810C/225

All Woods with Steel (i.e. Embedded Nails)8/10 TPI8/10 TPI

6" L x 3/4" W x .035" T9" L x 3/4" W x .035" T

Metal up to 1/8" ThickNo. 3014/150 18 TPI 6" L x 3/4" W x .035" T

Metal up to 1/8" Thick (for Curved Cuts)No. 3017/90 18 TPI 35/8" L x 5/16" W x .035" T

PORT

ABL

E H

AC

KSA

WS


Portable Hacksaws for Tough DutyPortable Hacksaws for Tough DutyOn-site cutting of pipe up to 24" OD and structural steel

Pneumatic • Electric • HydraulicCS Unitec's power hacksaws offer a wide rangeof options for portable cutting of pipe, structuralsteel, tanks and other materials. Our saws aredesigned for the toughest service in refineries,power plants, utilities, offshore oil, constructionand demolition applications and are ideal forshutdowns and turnarounds in process pipingindustries. CS Unitec's pneumatic saws aresafer than cutting with a welding torch inhazardous areas or confined spaces.

• Compact size, ideal for cutting in confined spaces• 2 3/8" blade stroke• Pipe clamps for 90˚ cutting of up to 24" OD pipe• Profile clamps for structural steel• Wide variety of blades and accessories for

cutting steel, stainless steel, aluminum, plastic,wood and ductile iron

• Optional blade guide to ensure right-angle cuts• Automatically cut pipe with our optional self-

feeding, pneumatic-powered pipe clamp system

Heavy-duty sawblades from 8"to 37" long

HSS, HSS-SL,carbide-coatedand Diamond-coated bladesavailable

Pneumatic, electricor hydraulic motor

Twist or lever throttle

Optional saw blade guidefor added blade stability –ensures straight cutting!

Two sizes available (Not required)

Assorted pipe clampsfor pipes up to 24"OD or profile clampsfor structural steel

Manual or automatic feed

Pneumatic:3/4" NPT ConnectionElectric:110 Volt (220V available)Hydraulic:1/2" FF (HTMA) Couplings

PORT

ABL

E H

AC

KSAW

S


Portable Power HacksawsPortable Power HacksawsAir, Electric and Hydraulic for cutting pipe and steel

Model 5 1215 0070with variable speedElectric

Model 5 1220 0050Hydraulic

Model 5 1212 0050 with lever throttlePneumatic

3/4" NPT Air Connection

11 Amps / 110 Volt (220 Volt Available)

1/2" FF Couplings

• HSS (High-speed Steel), HSS-SL (forstainless steel and hard metal), CarbideCoated and Diamond Coated

Accessory Saw Blades(see page 17)

Pneumatic - 3/4" ID NPT Air Connection5 1212 00105 1212 0050Electric - 11 Amps / 110 Volt**5 1215 0070*Hydraulic - 1/2" FF (HTMA) Couplings5 1220 0050

* Model 5 1215 0070 has an electronic speed control dial. **Also available as 220 Volt/50 Hz

1.5 HP

1.5 HP

1.5 HP

3.8 HP

Power

Roll

Lever

Trigger

Lever

Air Consumption: 51 CFM

Air Pressure: 90 PSI

110V/60 Hz (220V/50Hz is available)

Oil Flow: 4 GPM at 2000 PSI

Throttle Motor Specifications

2 3/8"

2 3/8"

2 3/8"

2 3/8"

BladeStroke

15.4

15.4

13

13.5

Weight(lbs.)

100-350

100-350

200-400

100-500

Strokesper Min.

1/2" ID1/2" ID

Cable

1/2" ID

HoseModel

No.

• Pneumatic, electric or hydraulic motor withvariable speeds

• Ideal for cutting pipe, tanks, structural steel,profiles and other materials

• Designed for the toughestservice in refineries, chemicalplants, utilities, pipelines,construction, offshore oil anddemolition applications

• Cut pipe up to 24" OD in one pass

• Chain clamps and profile clamps available foraccurate 90˚ cutting of pipe and structural steel

• 2 3/8" stroke for heavy-duty cutting

• Ideal for cutting in confined spaces

• Accommodate heavy-duty blades up to 37" long

• Optional saw blade guides to increaseblade stability

• Pneumatic pipe clamp system available forautomatically cutting pipe; easily attaches topneumatic hacksaw and shares same air supply(see accessory No. 5 1208 9980 on page 16)


Throttle Types for Pneumatic Saws:Roll Throttle (pneumatic model 5 1212 0010 only) – is used only with automatic feed pipe clamp (see page 16)

Lever Throttle (model 5 1212 0050) –provides on/off paddle switch for manual cutting with clamp

Pipe Capacity24" OD

Profile Capacity21 3/4" h x 11 1/2" w




HA

CKS

AW

AC

CES

SORI

ES

16

Hacksaw AccessoriesHacksaw Accessories

Model No. 5 1208 9980 – Automatic Clamp

• Save time and effort by automatically cuttingpipe up to 12 3/4" OD (up to 24" OD withextension chain)

• Self-feeding device savesoperator time and makes work easier

• Easily attaches to CS Unitec air hacksawand shares same 90 PSI air supply (Pipeclamp for use only with CS Unitec airhacksaw Model No. 5 1212 0010)

• Blade guide is optional (see page 17)

Model No. CP1 – Universal Clamp

• Self-aligning feet adjust to the form of theworkpiece (round, square and angled)

• Accommodates 1/2" to 123/4" OD [up to 24" ODwith extension chain no. CP1/10 (39-3/8" long)]

• CP1 easily attaches to most of ourreciprocating saws for 90˚ cuts in tight spaces

Extension Chains for Pipe ClampsExtension Chains for Pipe Clamps• Extend capacity of pipe clamps up to 24" ODModel No. 5 1201 9010 – 17 3/4" chain extensionModel No. 5 1201 9030 – 39 3/8" chain extension(allows pipe clamp Nos. 5 1202 9960 and 5 1208 9940 to fit 24" OD pipe)

Model No. 5 1207 99102" to 6" OD pipe clamp

Model No. 5 1202 99604" to 12 3/4" OD pipe clamp(up to 24" OD with extensionchain shown below)

Model No. 5 1207 897021 5/8" x 11 3/8" profile clamp

Clamps for Pipes and ProfilesClamps for Pipes and ProfilesEnsure 90˚ cuts through pipe and profiles

Clamps for Pipes and ProfilesClamps for Pipes and Profiles

Large Pipe Clamp,Model 5 1202 9960

Small PipeClamp,Model5 1207 9910

Up to 6"pipe dia.

Profile Clamp,Model 5 1207 8970

Automatic Feed Pipe Clamp for Pneumatic SawsAutomatic Feed Pipe Clamp for Pneumatic Saws


HA

CKS

AW

BLA

DES

17

Hacksaw BladesHacksaw Blades - 8" up to 37" long

Z22-9 HSSZ22-10 HSSZ22-11 HSS

Z22-6 HSSZ22-6 HSS-SL*Z22-6 CarbideZ22-31 HSSZ22-71 HSS

Z22-83 DSB

Z22-7 HSSZ22-7 CarbideZ22-29 HSSZ22-32 WSZ22-33 HSS

Z22-86 DSB

Z22-72 HSSZ22-72 Carbide

Z22-30 HSSZ22-30 HSS-SL*Z22-40 HSS

Z22-73 HSSZ22-73 CarbideZ22-74 HSS

Z22-75 HSSZ22-75 HSS-SL*

Z22-37 HSS

Heavy-duty cutting of pipe and structural steel

*Use HSS-SL Blades for best cuttingperformance on stainless steel and hard metal.

HSS or HSS-SL Saw Blade Shown

Order No. Steel andNonferrous Metal

Plasticand Wood

Ductile/Cast Ironand Masonry

Max. Dia.of Cut

DimensionsLength Teeth/Inch Thickness

8"8"8"

12"12"12"12"12"

12"

16"16"16"16"16"

19"

20"20"

21"21"21"

24"24"24"

30"30"

37"

81624

1616

Coated124

Coated

1616846

Coated

14Coated

12124

14Coated

8

1212

12

Steel/AluminumSteel

Sheet Metal

SteelStainless Steel

–Steel

–

–

Steel–

Steel/Aluminum–

Cast Iron

–

Steel–


–

Steel–

Steel/Aluminum


Steel

Plastics––

––––

Plastics/Wood

–

––

PlasticsPlastics/Wood

Plastics

–

––

––

Plastics/Wood

––

Plastic

––

–

–––

––

Masonry––

Ductile Iron

–Masonry

––

Cast Iron

Ductile Iron

–Masonry

–––

–Masonry

–

––

–

1/16" 1/16"1/16"1/16"1/16"3/16"1/16"1/16"3/32"1/16"1/16"1/16"1/16"1/16"7/64"5/64"3/16"1/16"1/16"1/16"5/64"3/16"5/64"5/64"5/64"5/64"

31/8" 31/8" 31/8"

65/8" 65/8"65/8"65/8"65/8"

65/8"

105/8"105/8"105/8"105/8"105/8"

13"

145/8"145/8"

155/8"155/8"155/8"

181/2"181/2"181/2"

247/8"247/8"

317/8"

**Use ProLube™ Specialty Lubricants with Hacksaw Blades to help tools work cooler, longer and more efficiently. ProLubeLubricants are non-toxic and ideal for stainless steel and hard metal cutting applications. See page 31 for details.**

Blade GuidesBlade Guides

• Ensure straight cutting through pipe and difficult materialsModel No. 5 1207 9970 for pipes up to 13" (20" min. blade length required)

Model No. 5 1207 8910 for pipes up to 21" (30" min. blade length required)

Optional guides with two roller bearings

Extra thick for 90˚ cutting

PORT

ABL

E BA

ND

SA

WS


Portable Band SawsPortable Band SawsFast, on-site cutting of

pipe and other materialsPneumatic • Electric • Hydraulic

Power for a wide range of industries

• Ideal for the toughest use in refineries, chemical plants, gas utilities, construction, offshore oil, mining, marine and demolitionindustries

• Fast, deep cutting of pipe, conduit,bolts, cable, angle iron, structural steel, chain and more

• Cut steel, stainless steel, Inconel,chrome, Hastelloy, aluminum,copper, iron, fiberglass, plastics,wood and more

p. 19

p. 20

p. 19

p. 20

4 3/4" Electric Band Saw

4 3/4" and 7" Deep Throat ™

Hydraulic Band Saws

7" Deep Throat ™

AirBand Saw

7" Deep Throat ™

Electric Band SawBand Saw AccessoriesWe also offer a full line of Band Saw blades andaccessories, including vise clamps for straightcutting. Please see page 21 for more information.

4 3/4" AirBand ™ Saw

p. 20




PORT

ABL

E BA

ND

SA

WS

19

• Fast, on-site cutting

• Safer in hazardous atmospheres than electric saws

• Ideal for process shutdowns and turnarounds

• Reduces need for "hot work permits"

• No fear of electric shock or blown circuitry in wet environments

• AirBand™ models with aluminum housing cut up to 43/4" OD

• Deep Throat™ models with planetary gearbox cut up to 7" OD

Vise Clamp for Straight CuttingSecurely clamp to round, square and angular materials for accurate cuts

Model No. 5 6031 9400 – Clamp-on vise for 7" Band Saw(Models 5 6031/5 6041/5 6047)Rounds: 7" (180mm); Squares: 5" (125mm); Angles: 5" (125mm)

Pneumatic Portable Band SawsPneumatic Portable Band Saws

AirBand™5 6003 0010

Deep Throat™ AirBand5 6031 0010

0.7 HP, 90 PSI,20 CFM

1.3 HP, 90 PSI,43 CFM

Motor Powerand Specs.

Variable130-220

Variable240-295

BladeSpeed(RPM)

447/8"

x 1/2"

66"

x 5/8"

BladeSize

Aluminum

StainlessSteel

Housing

211/2"

283/4"

OverallLength

1/4" NPT(ID)

1/2" NPT(ID)

AirConnec-

tion

14

28

Wgt.(lbs.)

3/8"

1/2"

AirHose

41/2" x 43/4"

7" x 7"

Rectangular

43/4"

7"

Round

CapacityModel No.

AirBand™ Model 5 6003 00104 3/4" OD cutting capacityATEX Certified for Ex Zone 2

Ideal for hazardous atmospheres and wet environments

Deep Throat™ AirBand Model 5 6031 00107" OD cutting capacityATEX Certified for Ex Zone 2

7"Cutting Capacity



• Ideal for plumbing and mechanical contractors,as well as demolition and plant maintenance

• Heavy-duty variable-speed motorsoperate on 110VAC; 220V available

• Standard models withaluminum housing cut up to 43/4" OD

• Deep Throat™ modelswith stainless steelhousing and planetarygearbox cut up to 7" OD

• Fast on-site cutting

Hydraulic Band Saws• Heavy-duty mining, utility, marine and construction

applications

• Operate on 2000 PSI / 4 GPM (up to 13 GPM) hydraulic oil

• Standard models cut up to 43/4" OD

• Deep Throat™ models with planetary gearbox cut up to 7" OD

• 1/2" Flush-face (HTMA) couplings and hoses are included

Electric Model 5 6046 0010

Electric Deep Throat™ Model 5 6047 0010cuts a section of rail

Electric5 6046 0010

Deep Throat™ Electric5 6047 0010

5.8 Amp,110VAC

5.8 Amp,110VAC

Motor Powerand Specs.*

Variable100-245

Variable100-245

BladeSpeed(RPM)

447/8" x 1/2"

66" x 5/8"

Blade Size

Aluminum

StainlessSteel

Housing

211/2"

283/4"

OverallLength

14

28

Weight(lbs.)

41/2" x 43/4"

7" x 7"

Rectangular

43/4"

7"

Round

CapacityModel No.

Hydraulic - 1/2" FF (HTMA) Couplings5 6043 0010

Deep Throat™ Hydraulic - 1/2" FF (HTMA) Couplings5 6041 0010

1.6 HP, 2000 PSI,4 GPM

1.6 HP, 2000 PSI,4 GPM

Motor PowerSpecs.

Variable100-256

Variable100-256

BladeSpeed(RPM)

447/8" x 1/2"

66" x 5/8"

Blade Size

StainlessSteel

StainlessSteel

Housing

22"

283/4"

OverallLength

23

28

Weight(lbs.)

41/2" x 43/4"

7" x 7"

Rectangular

43/4"

7"

Round

CapacityModel No.

PORT

ABL

E BA

ND

SA

WS

20

Electric and Hydraulic Portable Band SawsElectric and Hydraulic Portable Band SawsConstruction, utility, marine and demolition applications

Electric Band Saws

1/2" FF Coupling


No. 9 2506 0010No. 9 2506 0020No. 9 2506 0030No. 9 2506 0040

Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)

18 TPI

14 TPI

10/14 TPI*

8/12 TPI*

* Variable tooth pitch (10/14 TPI and 8/12 TPI) saw blades cut faster and last longer than standard pitch blades. Varying tooth size and gullet depth reduce harmonic vibration for quieter, more efficient cutting.

Cuts material 1/8" - 1/4" thick



Cuts material 1/2" and thicker

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

447/8" L x 1/2" W x .025" T

No. 9 2506 0220No. 9 2506 0230No. 9 2506 0240No. 9 2506 0200

14 TPI

10/14 TPI*

8/12 TPI*

8 TPI





66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

66" L x 5/8" W x .025" T

Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)

M42 Cobalt Steel SuperBand™ Saw Blades

CS Unitec's SuperBand™ saw blades are made of tough M42 steel.8% cobalt gives our blades the highest heat resistance and wearresistance of all portable band saw blades. The hardness is Rc 67-69.

SuperBand™ saw blades easily cut most ferrous and nonferrousmetals, including steel, stainless steel, Inconel, chrome, Hastelloy,tool steels, "super" alloys and other materials. Longer life, fewer bladechanges and the fastest cutting rates result in SuperBand™ providingthe lowest cost per cut.

• Securely clamp to round,square and angular materials for straight cutting

• Easily attach to CS UnitecPortable Band Saws, modelnumbers:5 6031 00105 6041 00105 6047 0010

Vise Clamp for Accurate CutsVise Clamp for Accurate Cuts

PORT

ABL

E BA

ND

SA

W B

LAD

ES A

ND

AC

CES

SORI

ES

21

Band Saw Blades and AccessoriesBand Saw Blades and Accessories

Model 5 6031 9400with Band Saw

Model No. 5 6031 9400Clamp-on vise for 7" Deep Throat™ Band SawsMaximum material size – rounds: 7"; squares: 5"; angles: 5"


Powerful, efficient cutting of wood and plasticUsed successfully for many yearsin polyethylene plants, petrochemicalindustries, utilities, underground minesand marine applications

PNEU

MA

TIC

CH

AIN

SA

WS

22

4 HP Pneumatic Chain Saw4 HP Pneumatic Chain Saw

• Ideal for use in polyethylene plants,petrochemical industries, utilities, undergroundmines and marine applications

• Pneumatic power is safer than gas or electric inhazardous atmospheres and wet environments,including underwater applications

• Low maintenance and easy startup – saw chainand motor are automatically oiled by twoseparate lubricating systems

• Powerful 4 HP motor at 90 PSI air pressureand 92 CFM

• Chain guard to protect operator

• Available with 17", 21" and 25" cutting capacity

• .404 pitch Super Chisel saw chain is standard

• Carbide-tipped and Ripping saw chainare optional

Model 5 1007 004025" cutting capacity

General Use5 1007 00105 1007 00205 1007 0040Underwater Use*5 1008 00305 1008 0040

* Pneumatic Chain Saw with 17" cutting capacity is also available for underwater applications.

4 HP

4 HP

4 HP

4 HP

4 HP

Power CuttingCapacity

17"

21"

25"

21"

25"

92

92

92

92

92

33"

37"

41"

37"

41"

CFM

90

90

90

90

90

PSI

18

19

20

19

20

Lengthwith Bar

Weight(lbs.)

3/4" NPT (ID)3/4" NPT (ID)3/4" NPT (ID)

3/4" NPT (ID)3/4" NPT (ID)

5/8"5/8"5/8"

5/8"5/8"

AirConnection Hose ID

ModelNo.

Underwater chain sawshown with exhaust valve.Model Series 5 1008

Air Tool Line Conditioner forunderwater air tools todisplace moisture. Developedto inhibit rust and corrosion ofair motors. 1 quart/liter, orderpart number MS 9105.


• Ideal all-purpose air chain saw• Only 5.4 lbs.• 10" capacity• Ideal for use in utilities, mines,

construction and agriculture

• More cutting efficiency with less down time

• Stays sharp 25x longer and lasts 10x longerthan regular-life saw chains

• Efficiently cuts tough materials, includingplastics, railroad ties, utility poles, hardwoodsand soft masonry materials

• Withstands severe cutting conditions thatinclude sand, mud, salvage work, etc.

• Easily resharpened

• Available in 10", 17", 21" and 25" lengths

• For wood and plastics

• Armor Tip available in 10", 17", 21" and 25" lengths

• Sprocket Tip available in 10" length only

Also available: Super Chisel and Ripping saw chain in 10", 17", 21" and 25" lengths

Motor PowerCutting CapacityPSICFMLengthWeightAir Connection

1.2 HP10"903021"

5.4 lbs.1/4" NPT (ID)

Model 5 1005 0010

Carbide-tipped Saw ChainCarbide-tipped Saw Chain

• For use with pneumatic chain saw, model no. 5 1005 0010 (above)

• Trigger on handle allowsaccurate control of speed

Chain Saw Extension Rod – Chain Saw Extension Rod – extends saw reach to 7'

Guide BarsGuide Bars

Close-up of Carbide-tipped ChainPN

EUM

ATI

C C

HA

IN S

AW

S A

ND

AC

CES

SORI

ES

23

Utility Pneumatic Chain SawUtility Pneumatic Chain SawCompact, lightweight and powerful

Part No.0165.0602

Model 5 1005 001010" cutting capacityIncludes built-in chain oiler


CO

NC

RETE

CH

AIN

SA

WS

24

Concrete Chain SawsConcrete Chain SawsCut through walls, floors and columns in a single pass

• Specifically designed for the demandingrequirements of professional sawing anddrilling contractors

• Now with AirFORCE F4™ Diamond chain –optimized for use with pneumatic saw

• Deep plunge cuts – up to 15" deep

• Square corners up to 14" with no overcuts

• Cut mechanical openings and irregular shapes

• Easily cut through reinforced concrete, brick,block, concrete pipe and natural stone

• Durable industrial finish on die-cast aluminumbody stands up to harsh environments

• Built-in Wallwalkerprovides leverageadvantage to makecutting easier

Optimized for pneumatic chainsawing

Model CS 536163-26.5 HP Air Motor

Pneumatic • Hydraulic

CS Unitec Offers 2 Types ofConcrete Chain Saws to MeetYour Cutting Requirements:

CS 536163 Pneumatic• High torque output for tough

cutting jobs• Powerful 6.5 HP air motor• No gas or engine fumes –

ideal for confined spacesand indoor use

• Noise level: 88 dB at 3 feet (approx. 1 meter)

• Weight: 29 lbs. (without bar and chain)

CS 526822 Hydraulic• Dependable, powerful

11 HP motor• Hydraulic power for heavy-duty

mining, utility, marine and construction applications

• Weight: 25 lbs. (without bar and chain)

Please see page 26 forConcrete Chain SawAccessories, including:

• Diamond Chains• Guide Bars• SpeedHook®

• And More!

Plunge cut up to 15" deep!

AirFORCE F4™

Diamond Chains


CO

NC

RETE

CH

AIN

SA

WS

25

CS 536163-1CS 536163-2

CS 526822-1CS 526822-2

6.5 HP

6.5 HP

11 HP

11 HP

Power

124 CFM @ 90 PSI (6 bar)

124 CFM @ 90 PSI (6 bar)

8 GPM @ 2500 PSI (172 bar)

8 GPM @ 2500 PSI (172 bar)

32

33

28

29

104

104

95

95

88 dB

88 dB

88 dB

88 dB

Motor Specifications

5700 RPM

5700 RPM

5700 RPM

5700 RPM

No LoadSpeed

Weight w/Bar andChain

No LoadTorque(in.-lbs.)

NoiseLevelat 3 ft.

10"

15"

10"

15"

Max.Depthof Cut

Model No.

Concrete Chain SawsConcrete Chain SawsRugged construction for demanding applications

Pneumatic Concrete Chain Saw

Hydraulic Concrete Chain Saw

Above: OptionalSpeedHook ® guidessaw for straightcutting (see page 26).

Model CS 52682211 HP Hydraulic Motor

FORCE F4Diamond Chains

ECO50-T and ECO50-TAKElectric and HydraulicReversible motor for drilling and tapping applications

Cuttercapacity 2" dia.

CO

NC

RETE

CH

AIN

SA

W A

CC

ESSO

RIES


AirFORCE StandardGeneral-purpose Diamond Chain10" – Part No. 53616615" – Part No. 536167

AirFORCE AbrasivePROFor cutting soft,abrasive material10" – Part No. 53174715" – Part No. 525344

Concrete Chain Saw AccessoriesConcrete Chain Saw AccessoriesMake your concrete chain saw work for you

1.

Three options for cutting

Guide BarsGuide Bars with internal water feed10" Guide BarPart No. 529829• 10" cutting capacity• 9" depth of square cut• Accommodates a 25

segment Diamond Chain

15" Guide BarPart No. 523080• 15" cutting capacity

• 14" depth of square cut

• Accommodates a 29segment Diamond Chain

AirFORCE PremiumFor cutting concretewith steel reinforcement10" – Part No. 53616415" – Part No. 536165

10" chain has 25 segments for 10" max.cutting depth, 9" square corners

15" chain has 29 segments for 15" max.cutting depth, 14" square corners

Match the Diamond Chain tothe material or application:

2. 3.

SpeedHook ®SpeedHook ®

Guides the saw for straight cutsSpeedHook® Complete Kit Part No. CS 70552 (includes SpeedHook® 42" rail,1 saw adapter and 1 axle)• Quickly and easily attaches

to wall with anchors

• Guides saw for straight cuttingthrough reinforced concrete,brick, block and natural stone

• Note: Reduces cutting depth by 3"

AirFORCE F4™

Diamond Chains



CO

NC

RETE

CH

AIN

SA

W C

HA

INS


Maximize Diamond Chain life with these hints

The cutting life of the chains is not guaranteed. There aremany variables from job to job, including hardness of concrete,which make it impossible to accurately predict chain life.*These numbers are rough, starting point estimates only, notfor bidding purposes. Please refer to Operator's Manual forproper safety precautions.

Concrete Diamond Chain LifeConcrete Diamond Chain Life

Factors negatively affecting chain life:• Steel reinforcing… many pieces of large diameter rebar cause reduced life• Aggregate hardness… harder aggregates cause reduced life• Operator experience… first-time users generally get less chain life

Cutting tips to improve chain life:• Use minimum of 20 PSI water pressure• Always cut at full throttle – slowly plunge into wall

and push hard enough to cause the RPMs to drop by 25% to 30%• Always apply steady feed force• Slowly rock the bar and chain into the cut using Wallwalker®

as a pry point• Reduce arm motions – hold saw close to body, using legs and body to apply

feed force; always cut with saw between shoulders and knees, preferably at waist height• If saw begins to drift off the intended cut line, pull out and restart cut

Estimated chain life for AirFORCE Premium – 29 segment chain (Part No.CS 536164-15) is approximately 600 in.-ft. in concrete with up to 5/8" rebar.

Wall Thickness

6 inches

8 inches

10 inches

Lineal feet in common wall thickness*:Lineal Cutting Feet

100 feet

75 feet

60 feet

8"

7'

3'How to calculate inch-foot (in.-ft.)An inch-foot (in.-ft.) is equal to the Depth of Cutin inches x Length of Cut in feet. This measurementis used to determine chain or blade life.

For example:Calculate how many in.-ft. are in this doorway.

1. Determine the Depth of Cut in inches.For this example, it is 8 inches.

2. Determine the Length of Cut in feet.3 + 7 + 3 + 7 = 20 feet.

3. Multiply the two numbers.8 in. x 20 ft. = 160 in.-ft.

Note for metric users: 1cm = .3937 inches and 1 meter = 3.2808 ft.

• Removes moisture and dirt from air lines; a float valveautomatically ejects water and dirt

• Includes automatic oiler; prevents tools from freezing incold environments

• Eliminates air motor downtime caused by water and dirt

• Connections for two tools, max. air flow 185 CFM

AirPacAirPac Extends life of pneumatic power tools see page 29 for more information

Model CSAP-2

PNEU

MA

TIC

CU

T-O

FF S

AW

S


Pneumatic Cut-off SawsPneumatic Cut-off Saws - Hand-held and Walk-behind

Cut concrete, asphalt, masonry, steel and more

Hand-held Cut-off Saws, 14" and 18"• Wet or dry cutting of concrete, reinforced

concrete, asphalt, masonry, steel and more• Cut up to 7" deep with no gas or engine fumes• Low maintenance – no belts, pistons, fuel lines

or carburetors• Accept diamond or abrasive blades• Adjustable blade guard with built-in water connection• In-line oiler for motor lubrication• 1" arbor size, 1/2" NPT air connection

Walk-behind Cut-off Saw – 20" Capacity• Wet or dry cutting of concrete, asphalt

and other materials

• Cut up to 7" deep with no gas or engine fumes

• Low maintenance – no belts, pistons,fuel lines or carburetors

• Designed for tough cutting jobs, including jointsawing, floor sawing, trenching, road repair and plant maintenance

• 9.5 HP pneumatic motor with gearbox drive

• Rugged steel construction – yet only 107 lbs.

• Built-in water connection for wet cutting

• Built-in oiler for motor lubrication

• Optional water tank kit

PowerRPM (No Load)Max. Depth of CutMax. Blade CapacityCFM @100 PSIDriveWeight

9.5 HP2900

7"20"92

Gearbox107 lbs.

Model CSR 150

Cut-off Saw with 12" abrasive blade

14" Cut-off Saw with diamond blade

Built-in 3/4" water connection

• 1/2" NPT AirConnection(works onboth left andright side)

Adjustable •crank handleto raise and lower blade

•

High-torqueoutput gear box

• 3/4" WaterConnection

• 1" arbor• Weighs 107 lbs.

Pointer •

CSH 100CSH 125CSH 150

5 HP

9.5 HP

9.5 HP

Power

5250

3200

3200

RPM(No Load)

Max.Depthof Cut

4"

5"

7"

90

92

92

Direct

Gearbox

Gearbox

CFM @100 PSI

14

14

18

Max.Blade

Capacity

22

26

28

Drive Weight(lbs.)

ModelNo.

AIR

TO

OL

AC

CES

SORI

ES


AirPacAirPac

Air Tool Lubricant – Air Tool Lubricant – Non-toxic

• Removes 98% of water andcontaminants from both portableand stationary compressed airsystems to protect pneumatic tools

• Totally automatic – a float valveautomatically ejects theaccumulated water and dirt

• Maintenance-free – no filters orparts to replace or service

• Includes automatic 1/2 pint oiler;prevents tools from freezing in coldenvironments

• Two tool outlets; Chicagocouplings on all connections

• Weighs 40 lbs., max. air 185 CFM

• Use Air Tool Lubricant for bestresults – see below for moreinformation

How it Works:

• Air compressors compress air into smallareas – this causes heat, which containsmoisture

• As heated air travels through air lines, itcools, creating water droplets

• When this air/water mixture enters theAirPac, it travels through a baffle that trapsthe water and dirt and drops it into aholding area

• When enough water is accumulated, a floatallows the water and dirt to beautomatically ejected

• Dry air then enters the lubricator and ismixed with oil and sent to the tool

CS Unitec offers three types:

ProLube-ATL: A super-premiumsynthetic air tool lubricant. Providesmaximum lubrication, cleaning andprotection for portable air tools.

ProLube-ATL/AF (anti-freeze):ProLube-ATL/AF blend that preventsfreezing and is ideal for operating airtools in cold climate conditions.

Air Tool Line Conditioner:For use in underwater air tools.Displaces moisture. Developed toinhibit rust and corrosion of air motors.

Extends life of pneumatic power tools

ProLube-ATL1 gallon bottle

Order No.CS 7043-001

Case (4 bottles)Order No.

CS 7043-002

1 gallon bottleOrder No.

CS 7049-001

Case (4 bottles)Order No.

CS 7049-002

ProLube-ATL/AF

1 quart/liter bottleOrder No.MS 9105

Air Tool Line Conditioner

Model CSAP-2

• Pneumatic or electric power is ideal for cutting sheetmetal, steel plate, weldments and double sheets, as wellas exotic materials and plastics

• Two-speed gearbox (model CS-3400-P or -E)

• Heavy-duty construction

• Head can be rotated to four 90˚ positions (on selected models)

• Cut over 90˚ bends with optional die

• Maximum cutting capacity:Mild Steel: up to .375"Stainless Steel: up to .195"Aluminum: up to .500"

• Ideal for use in underground storage tankremoval, I-beamsplitting, platecutting and more

• Lightweightconstruction withquick-changepunch and die


NIB

BLER

SPneumatic and Electric NibblersPneumatic and Electric NibblersEasily cut sheet metal and steel up to 3/8" thick

Electric (110 Volt)CS-350-ECS-500-ECS-700-ECS-3400-E*PneumaticCS-350-PCS-500-PCS-700-PCS-3400-P*

* 2-speed gearbox

12 Amp

12 Amp

17.4 Amp

17.4 Amp

1.5 HP/90 PSI

1.5 HP/90 PSI

4 HP/90 PSI

4 HP/90 PSI

Power

–

–

–

–

54

54

100

100

CFM

4

4.5

5

5.2

4

4.5

5

5.2

WorkingSpeed

(ft./min.)

StartHoleDia.

1.25"

1.25"

2.75"

3"

1.25"

1.25"

2.75"

3"

650

600

400

230 / 370

530

530

340

210 / 350

.135"

.197"

.276"

.375"

.135"

.197"

.276"

.375"

.090"

.135"

.197"

.276"

.090"

.135"

.197"

.276"

.135"

.276"

.394"

.500"

.135"

.276"

.394"

.500"

Strokesper

Minute

.280"

3.125"

5.5"

16"

.280"

3.125"

5.5"

16"

Min.Radius

7.5

8.5

26

32

10

10.5

27

32

Mild Steel StainlessSteel

AluminumMax. Sheet Thickness

Weight(lbs.)

ModelNo.

CS-3400 cutsup to 3/8" thicksteel.

LUBR

ICA

NTS

/ W

ARR

AN

TY


LubricantsLubricants

Also Available…Also Available…

WarrantyProducts of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase.This warranty does not apply to normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.

If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.

CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product.There are no other warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repair or replacement as described above.

Your cutting tools will work cooler, longer and moreefficiently with ProLube™ Lubricants from CS Unitec.• Improve cutting tool output and performance• Prolong tool life by reducing friction and wear• Unique composition provides

excellent adhesion to cutting tools for maximum lubrication

• Corrosion inhibitor• Ideal for saw blades and drill bits• Non-toxic

ProLube™ProLube™ Ideal for cutting steel,stainless steel and hard metals

ProLube LiquidWater soluble 16:1CS 7010-5041 gal. bottle

ProLube SolidCS 7020-0131.6 oz. push tube

CS 7020-00014.5 oz. push tube

ProLube PasteCS 7030-712

12 oz. tub

High film strength – stays on for the cut!

Non-Sparking &Non-Magnetic Safety ToolsAlBr or CuBe Alloy

• For Ex zones where hazardous,flammable or combustiblematerials may be present

• Hammers, wrenches, sockets and more

AirOperated

• For turning valves, tightening, tapping,reaming, pipe beveling, expanding and more

• Hydraulic models available

Portable Magnetic Drills –Air and Hydraulic

Air NutRunners

AIRBOR™ Drill available withOptional Rack to increasestroke length to 10 1/4"

• Drill up to 21/16" (52mm) dia. holes

• Coolant system reduces risk of sparking

• Lightweight and portable• Electric models to cut holes up to 5" dia. and 4" deep

HB-4400 HydraulicDrill – ideal forsubsea, marine

and constructionapplications

SAFETY & POWER TOOLSCS Unitec has the right tools for working in ATEXand EX zones, as well as in Subsea applications

CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email [email protected] • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2009, CS Unitec, Inc., 04-09-10M

Also available from :CS Unitec, Inc. specializes in electric, pneumatic and hydraulic power tools for construction and industry.

Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company inventedthe first pneumatic portable band saw. CS Unitec has added to its list of industry firsts with the widestrange of portable magnetic drills and hand-held concrete core drills. The line also includes electric,pneumatic and hydraulic portable band saws, reciprocating saws, hacksaws, nut runners, rotary hammerdrills, rolling motors, metal finishing tools, portable mixers, dust extraction tools and vacuum systems.

… the power of innovation!®

For more information, please visit our Web site at www.csunitec.com.

Electric, hydraulic andpneumatic Hand-heldand Rig-mounted Core

Drills for concrete

PneumaticMagnetic Drills

for use inhazardous

environmentsElectric MagneticDrills for cutting up

to 5" holes inmetal

Slow-speed Drive Units for high-torque turning

Nut Runners for turning valves,tightening, tapping, reaming,

beveling and expanding

Air and hydraulic SDS RotaryHammer Drills for concrete

Metal FinishingMachines

Electric, Pneumatic and Hydraulic ToolsElectric, Pneumatic and Hydraulic Tools

View product demonstrations at www.csunitec.com.

CS Unitec Catalog - CS Unitec Catalogo Sierras Portatiles

Documents

Transcript of CS Unitec Catalog - CS Unitec Catalogo Sierras Portatiles