CRESTLINE · 2020-06-10 · Crestline Vinyl Windows and Doors TABLE OF 4-5. Overview of Product...

V I N Y L W I N D O W S & PAT I O D O O R S

CRESTLINE®Select 250™ • Select 350™

C r e s t l i n e V i n y l W i n d o w s a n d D o o r s

TABLE OF

4-5. Overview of Product Lines6. Hardware, Grille and Trim Options8-9. Glass and Glazing Options10-11. Single Hung and Double Hung Windows12-13. Single and Double Gliding Windows14-15. Casement and Awning Windows16-17. Sliding Doors18. Specialty Shaped Windows19. Limited Lifetime Warranty

Shown: Select 350 Casement Windows in Ivory

CONTENTS

2


FLEXIBILITYMultiple styles. Custom shapes. A selection of color interiors. Beautiful color exteriors. Distinctive grille styles. Crestline vinyl windows and doors accommodate your design preferences, your project, your budget and your lifestyle.

RELIABILITY Fusion-welded frames and sashes. Maintenance-free exteriors. Contoured glazing beads. These all ensure Crestline’s matchless quality and long life. Backed by our Limited Lifetime Warranty and a company that’s been around for years, Crestline’s products reign in reliability.

In a hurry? Crestline’s prompt delivery on special order products meets your schedule.

ENERGY EFFICIENCYCrestline helps you reduce your home’s energy use with high performance technology in every window and patio door. Multiple chambers inside the frame trap air for superb insulation against heat loss in the home. Several glass options surpass Energy Star ratings. With The World’s Best Energy Glass™ System, Zo∙e∙shield®, Crestline products are more efficient than standard insulated glass, and help provide protection of your home’s interiors from fading caused by the sun.

THE QUALITY YOU EXPECT. THE OPTIONS YOU WANT. THE PRICE YOU LIKE.

Whether building new, remodeling or replacing windows, Crestline® Windows and Doors offers unparalleled flexibility, reliability and energy efficiency. Mix and match, Crestline vinyl windows and doors complement one another and your home’s design.

3


AT-A-GLANCE PRODUCT OFFERINGBeauty, versatility and dependability. All from Crestline vinyl windows and patio doors. Crestline has practical alternatives to meet your needs, your desired look and your budget.

Shown: Select 350 Cottage Style Double Hung Windows with Value Divided Lites in Top Sash Only

4


Styles Select 350/250Double Hung R

Double Hung with Simulated Transom R

Single Hung R

Casement/Awning R

Single Glider R

Bows and Bays R

Specialty Shapes R

Sliding Patio Door Traditional, French

CRESTLINE VINYL WINDOWS AND PATIO DOORS PRODUCT STYLE COMPARISON

SELECT 350™ Dependability Traditional wood window profile. Fade-resistant, no-maintenance vinyl interiors and exteriors. Double-wall construction. 3-1/4" fusion-welded frames. Channels on the exterior of the frames allow for easy installation of moulding or siding. All ensure Select 350’s longevity and years of care-free use.

Concerned about wind? Select 350 products are available with structural and hardware enhancements that withstand the strongest gusts. See your Menards associate to learn more about Crestline’s DP 50 options and available styles and sizes.

Integrated J-channel is standard for Double Hung, Single Hung and Sliding units.

SELECT 250™ Added StrengthEngineered to add strength and add insulating performance to the frame. Allows for a quick, secure installation and prevents water penetration. Full 3-1/4" fusion welded frame adds strength and durability for years of trouble free use.

Select 350 Corner Section

(Exterior)

Select 250 Corner Section

(Exterior)

5


OPTIONS SELECT 250/SELECT 350

Solid Vinyl*†

PaintedExterior*††

Grilles

WindowHardware*

Sliding Patio Door Hardware*

White Ivory

White Ivory

Ivory

Almond Desert Tan Terra Bronze

Almond Rustic Bronze

Rustic Bronze Brushed Nickel Desert TanBright BrassWhite Almond

3/4" Profiled Grilles in Airspace

5/8" Flat Grilles in Airspace

THE FINISHING TOUCHES — OPTIONSCreate a look all your own. Crestline’s options make it easy. Check out the choices in interior and exterior colors, hardware and grilles.

* Colors have been reproduced as accurately as printing technologies permit. Visit your local Menards store for actual product color samples.

Grille Pattern Options

Custom PatternsPrairie and Colonial Patterns

7/8" Simulated Divided Lites

7/8" Value Divided Lites

White Ivory Almond Dark BronzeDesert Tan BrownTerra Bronze Jet Black

Hunter Green Brick Red Silver Ice MetallicLight Gold

MetallicAntique Bronze

Metallic

† † Painted exterior colors have a White, Ivory or Almond interior color.

† True solid vinyl color throughout.

15/16" Profiled Grilles in Airspace

6


Shown: Select 250 Single Hung Windows with a Half Circle Direct Set Window in White

7


YOUR CHOICE OF ENERGY SAVINGS Glass, or glazing, is the single most important factor in the energy efficiency of a window or patio door. It's nice to know Crestline’s advanced glazing systems are the best available.

WHAT IS ZO-E-SHIELD® GLASS?Zo-e-shield® was designed for comfort and engineered for efficiency. Below are just a few of the added benefits of Zo-e-shield® glass. To learn more go to zoeshield.com.

REAL WARM EDGE® SPACERCrestline’s warm edge spacer system bonds the two panes of dual-insulated glass together. This non-metallic spacer keeps your home’s interior temperature consistent by limiting the amount of heat or cold that passes through the glass.

A conventional all-metal spacer allows heat loss

through the edge of the glass.

Crestline’s warm edge insulated glass system minimizes heat loss

and condensation.

COMFORT YEAR ROUND

During the winter, Zo-e-shield® minimizes heat loss,

keeping rooms warmer During the summer,

Zo-e-shield® reflects the sun’s heat, keeping rooms cooler.

WHAT IS EASYCARE®? EasyCare® is a glass technology that takes the work out of keeping glass clean by keeping it cleaner, longer by making the glass superhydrophilic, or smoother than ordinary glass. When it rains, the exceptionally smooth nature of the glass allows water to spread out and sheet off the glass taking dirt and grime with it while allowing for faster evaporation. This means our glass is more resistant to dirt and residue clinging to it. EasyCare surface coating is an optional upgrade.

Without easycare, water beads up leaving behind

dirt and water spots.

With easycare, water spreads out and sheets off the glass taking away dirt and grime.

8


GLAZING SELECT 350/250

Standard 3/4" warm edge insulated glass

Options

Zo∙e∙shield® with optional EasyCare® Lo-E2

Sun240® Lo-E2

Inert Gas in the Airspace*TemperedObscureBronze or Gray TintHigh-Altitude GlassSafeGuard™ Certified with Sound Control

CRESTLINE VINYL WINDOW AND PATIO DOOR GLAZING OPTIONS

Standard Lo-E2• 2 panes of glass• Double layer of Lo-E coating• Optional inert gas-filled

insulating airspace*• Real Warm-Edge® spacer

GLASS OPTIONS

• 2 panes of glass• Triple layer of Lo-E coating• Optional inert gas-filled

insulating airspace*• Real Warm-Edge® spacer

E

• 2 panes of glass• Triple layer of Lo-E coating• Extreme Lo-E interior coating• Optional inert gas-filled airspace*• Real Warm-Edge® spacer

• 3 panes of glass• Multiple layers of Lo-E coating• Optional 2 inert gas-filled insulating airspaces*• 2 Real Warm-Edge® spacers• Available in casements, awnings, pictures and special shapes

The Ultimate Option in Security & Energy Efficiency

SAFEGUARD™ offers an optional high-strength PVB interlayer creating a strong laminated inside pane of glass that increases resistance against certain impacts, thermal stress, and chemical deterioration. This helps protect your home from intruders, storms, loud sounds, and can even contribute to lower home insurance premiums.

Forced Entry Protection

SoundControl

Sunscreen for Your Home

* Harmless inert gas increases energy efficiency by minimizing the transfer of warm and cold air. Not available in all states. Check for availability.

AS AN ENERGY STAR PARTNER, Crestline® has determined that all products bearing the ENERGY STAR logo meet or exceed the ENERGY STAR guidelines for energy efficiency.

9


SINGLE HUNG AND DOUBLE HUNG WINDOWSLooking for a window that slides up and down without a lot of effort? Want a traditional style window updated for today? You found both with any of Crestline’s single and double hung windows.

10


CURB APPEALCrestline’s single and double hung tilt windows have exceptional curb appeal, enhancing your home inside and out. The operating sash – the lower sash on single hung windows and both sash in a double hung window – tilt-in for easy cleaning. These windows provide the best of today with a classic look.

DETAILSBeauty is in the details of Crestline’s single hung and double hung windows. Sloped sills give the windows the look of a traditional wood window. Integral finger lifts make the windows easy to open and provide a sleek appearance. Discreet tilt-latches hold the operable sash firmly in the jamb yet release easily when it comes time for cleaning.

Double hung units are available in the Select 350 and Select 250 product lines.

CLEANING MADE EASY Crestline single hung and double hung windows allow you to release the sash from the jamb liner, then conveniently tilt the sash inward for trouble-free cleaning of outside surfaces from inside your home.

Single hung units are available in the Select 350 and Select 250 product lines.

Select 350 Double Hung

Select 350 & Select 250 Steel Reinforced Interlock

Select 350 & Select 250 Recessed Tilt Latch

TRADITIONAL STYLE. TODAY’S TECHNOLOGY.

IMPROVED BALANCE SYSTEM ON SELECT 250™ AND SELECT 350™ SINGLE HUNGS & DOUBLE HUNGS• Innovative new inverted constant force balance system

• A larger percentage of the sash weight is balanced allowing for easier operation of larger sizes

• Greatly reduces operation noise

• Locking shoe – locks in place when sash is tilted making it easy to remove sash

• Locking tilt pin – locks sash tight to the frame

Inverted Constant Force Balance System

11


SINGLE GLIDING WINDOWSGliding windows — a practical choice for any opening and more so for places with little clearance. Select 350 and Select 250 single gliding windows all promise little maintenance and easy operation for years.

12


STRIKINGLY BEAUTIFUL. INCREDIBLY PRACTICAL.

PRACTICALGliding windows are a smart choice for any opening. Affordably priced, yet still reliable, energy efficient and convenient.

EFFICIENTThe gliding window fits snuggly in the jamb to limit air or water infiltration. A unique sill system funnels water away from a home’s interior, preventing water damage around the windows. High efficiency glass options compound your energy savings.

EXPANDABLEHave a larger opening to fill? Crestline gliding windows are available in two-panel or three-panel end vent styles that combine two sliding sash with a picture center.

Single gliding windows are available in the Select 350 and Select 250 product lines.

Select 350 Single Gliding Window Select 250 Single Gliding

Select 350 and Select 250 gliding windows feature a

durable nylon track with sash rollers for smooth operation

Select 350 and Select 250 tilt latches offer quick removal of the sash for easy cleaning

All units viewed from exterior

Standard Operation Single Gliding Window

End Vent Gliding Window End Vent (Equal Lite) Gliding Window(Available in Select 250™ and Select 350™)

FixedFixed

13


CASEMENT AND AWNING WINDOWSCasement and awning windows, available in the Select 250 and Select 350 product lines, provide securely stylish openings. Available up to 6'0" tall and in multiple-wide configurations, Crestline casement windows are a dramatic addition to any room.

14


STYLISHLY DEPENDABLE AND CONVENIENT.

SECUREMulti-point locking systems ensure a weather-tight seal and greater protection for your family.

Select 250 and Select 350 case-ment windows feature a single lever lock which is particularly handy for taller windows where the top lock may be out of reach.

EASY TO CLEANWant to reach the outside of your windows? No problem. Crestline’s casement windows crank open up to 90 degrees so you can clean the windows from the inside. The hinges and operator arms also easily detach for those rare times you want to remove the sash completely.

Casement windows are available in the Select 250 and Select 350 product lines.

AWNING WINDOWSAccommodating Horizontal Spaces

For those spaces where you want a window and have limited clearance, Crestline’s awning windows are a great alternative. These windows crank out and up, providing protection from the elements while still allowing air to circulate.

Awning windows are available in the Select 250 & Select 350 product lines.

Roto-Operator, Open Roto-Operator, Closed

Multi-Point Locks

Select 350 Awning Window

15


SLIDING DOORSTraditional profile or French. One, two or four panels. No matter what style you choose, a Crestline sliding door will make a beautiful passageway. All are stylish, energy efficient and come with tempered glass.

Shown: Select 350 Sliding Patio door in White16


OPEN UP TO LIVING.

CHOICESCrestline sliding doors are available in a traditional panel style that lets you see more of what’s on the other side. French style doors have wider stiles and rails for an upscale look. For wider openings, the bi-parting door gives you more clearance and more view with two operating panels in between two stationary panels.

LONG LASTINGThe operating components on the patio doors are built to last. End-adjustable tandem ball-bearing rollers or durable stainless steel ball-bearing rollers operate effortlessly for years in the heavy duty track.

Traditional and french sliding doors and 4-panel bi-parting doors are available in the Select 350 and Select 250 product lines.

Adjustable Rollers

Security Foot Bolt

French Sliding 4-Panel Bi-Parting Sliding DoorTraditional Sliding

Select 350 French Sliding Door with Extended Eyebrow Transom

Select 350 Traditional Sliding Door

RUSTIC BRONZE

Ivory

Rustic Bronze Brushed Nickel

Desert Tan

Bright Brass

White Almond

17


SPECIALTY SHAPED WINDOWSTop ‘em off. Dress ‘em up. Combine ‘em. Crestline specialty shapes enhance the beauty of your windows, patio doors and your home. Transoms, sidelites or direct set units all come with the same reliable features and extensive options. Pair two, three or four casements or double hungs for a distinctive look. Stack a transom or fixed unit above an operating unit for more light and a dramatic effect.

Shown: Select 350 Custom Configuration Direct Set Windows 18

Crestline’s Limited WarrantySubject to the conditions, exclusions and limitations that follow, the manufacturer of CRESTLINE products, (“CRESTLINE”) warrants CRESTLINE products (Select 250™, SELECT 350™ and Replacement Windows and Doors) to be free from defects in material and workmanship as noted below. All referenced times are in relation to date of purchase. Warranty effective date June 1, 2016.

Innovations: Wood Shield®, Symmetry Balance System®, TriCore® Frame Technology, EasyCare®, Zo-e-shield™

WARRANTY COVERAGEVinyl Products - Limited LifetimeCrestline warrants its vinyl product line installed in single family owner-occupied residences to be free from defects in material and workmanship for the life of the product, except as delineated in the specific limitations below.

ACCIDENTAL GLASS BREAKAGE - Limited LifetimeCrestline warrants its insulated glass against accidental breakage except as delineated below:• This warranty does not cover glass breakage caused

by acts of God, improper installation, abuse, misuse, alteration, building or foundation movement, improper or insufficient handling, or storage.

• This coverage is transferable to subsequent homeowners. The transferred coverage is ten (10) years from the date of manufacture.

COMMERCIAL – TEN YEARSCrestline warrants its vinyl product line installed in other than an owner-occupied residence to be free from defects in material and workmanship for a period of ten (10) years, except as delineated in the specific limitations below.

PAINTED FINISHES ON VINYL — TEN YEARSCrestline warrants that its factory-applied painted finishes will not peel, blister, or flake for TEN (10) years. Factory-applied painted finishes will not exhibit excessive color change for TEN (10) years. Note: this coverage does not extend to discoloration, polish, surface damage, or alteration caused by the use of natural or chemical solvents or an environmental factor causing such damage.Fading or changing in color of the factory-applied painted finishes is not a defect unless it exceeds five (5) E units, calculated in accordance with ASTM D2244, paragraph 6.2. Color change shall be measured on an exposed colored surface that has been cleaned of soils, and the corresponding values measured on the original or unexposed colored surface. Fading or color changes may not be uniform if the surfaces are not equally exposed to the sun and elements. If the above ASTM standards change, the standard in effect at the time of purchase applies. As an option to replacement, we may choose to refinish the product.

LAMINATED GLASS – FIVE YEARSLaminated glass shall be free from defects in material and workmanship for a period of FIVE (5) years.

BLINDS OR SHADES BETWEEN THE GLASS-TEN YEARSInsulated glass units with blinds or shades, are warranted to be free from defects in material and workmanship for a period of ten (10) years.

TRIPLE GLAZED GLASS UNIT – TWENTY YEARSTriple glazed insulated glass units are warranted against failure of the hermetic seal for a period of twenty (20) years.

GLASS STRESS CRACKS - ONE YEARStress Cracks are warranted for ONE (1) year. Any products or parts of products determined by Crestline to contain defects in material or workmanship, Crestline will, at its option, repair the products or parts at no charge, provide replacements at no charge, or refund the original price of the defective part(s). Decisions as to whether to repair, replace, or refund, shall be made by Crestline in its sole discretion.

TRANSFERABILITY – TEN YEARSThis warranty is transferable to subsequent owners. This transferred warranty is the lesser of ten (10) years or the period specified from the date of purchase.

TO GET ASSISTANCEFor further information, or to make a claim under The CRESTLINE Limited Lifetime Warranty, please contact the contractor who installed the product or the CRESTLINE retailer from whom the product was purchased or fill out an online service form. To find your closest retailer, please use the dealer locator on the web site: www.Crestlinewindows.com.

Online service form: www.crestlinewindows.comIf you cannot find a local retailer, you may contact us at:CRESTLINE WINDOWS AND DOORS P.O. Box 309 Medford, WI 54451 800-826-5509Please provide the following information:1. Your name, address, daytime telephone number and

e-mail address.2. A description of the product for which the claim is being

made.3. Original proof of purchase (or approximate date if exact

date is not known).4. The name of the CRESTLINE retailer from whom the

product was purchased (if known).5. The nature of the product complaint.6. The coded information on the spacer between the panes

of glass.If the limited warranty period has expired or for repairs not covered by warranty, many replacement parts are available for purchase. When warranty coverage is unclear, CRESTLINE may charge an inspection fee for any on-site product inspection. If the inspection reveals the CRESTLINE product has a defect covered by this limited warranty, the inspection fee will be waived.

Replacement products or parts will be the closest equivalent current products or parts and may not exactly match the original. Replacement will be delivered to the original point of purchase with no shipping charges. If shipment direct is requested, normal shipping and handling charges will apply.

In cases relating to hardware, the customer may be invoiced for the replacement hardware at the list price and appropriate credit will be issued when the defective hardware has been returned to CRESTLINE.

Supplying replacement products or parts shall not extend the time period of the warranty and the replacement product or part shall be warranted only to the extent of the unexpired portion of the warranty period on the originally purchased product or part.

NON COVERAGE

• Normal wear and tear, weathering and natural variations in wood color or texture are considered normal and not a product defect.

• Normal wear and tear of hardware and hardware finishes that can naturally occur (e.g. corrosion, tarnishing) or damage at construction site.

• Minor scratches, slight glass curvature or glass imperfections are natural variances in glazing and do not impair structural integrity or significantly obscure normal vision.

• Repairs, refinishing or similar activities involved when skilled labor installs or replaces products.

• Condensation and any related water damage (such as mold or wood rot due to water or ice build up), which occur as a result of humidity within the property or changes in the interior/exterior temperatures, do not indicate a defect. Contact a heating/cooling specialist to assist.

• Products installed in a non-vertical position, discoloration of non-visible parts, or failures or operating difficulties due to accident, acts of God, abuse, misuse, alteration, exposure to the elements, improper or insufficient handling, storage, maintenance or service including, but not limited to, obstruction of weep holes. Installation of units must be finished and operated in accordance with our installation instructions attached to each unit.

• Failures or operating difficulties resulting from use of high-expansion foam insulation, incompatible sealant, cleaning agent, or exposure to corrosive, unusual, harmful or aggressive substances, acid rain, fumes or condensates, subjection to abnormal stress from localized application of heat, excessive vibration or movement of buildings or foundations or to other abnormal physical stress or use in high humidity areas.

• Products installed in buildings with cladding systems that do not allow for proper management/drainage of moisture (e.g. EIFS or synthetic stucco without an engineered drainage system).

• Vinyl parts or weather strip that has non-factory-applied paint or stain voids the warranty of the affected unit.

• Warpage or air/water infiltration on any swing door with a call-out height of greater than 6'10" unless CRESTLINE’S multi-point lock system is used with the door.

• Any installations at an altitude over 3,500 feet above sea level unless capillary tubes have been installed or a HIGH ALTITUDE GLASS PACKAGE is used, which provides limited coverage.

• Products or components not provided by CRESTLINE including but not limited to hardware locksets, strikes, or panning systems.

• CRESTLINE products that are stacked or mulled with products manufactured by others.

• Products with modifications (e.g. customer applied paint finishes, tints, films) or security systems without prior approval.

ADDITIONALLY

• Insulated units with capillary tubes will not have inert gas fill.

• ADA-compliant sills or telescoping, pocket and bifold patio door systems are not designed nor are they intended to manage moisture or water infiltration. The

determination of proper building design and moisture management (through an overhang or otherwise) is the responsibility of your building designer, architect or contractor.

• Warping of a door shall not be deemed to be a product defect unless the warping is in the door panel itself and then only if the warping is more than one quarter inch. The amount of warp shall be determined by placing a taut wire or string or straightedge across the face of the installed door panel thought to be concave and measuring the amount of warp at the point of the greatest distance between the bottom of such wire, string or straightedge and the face of the door panel. CRESTLINE may, at its option, defer action on a warping claim for a period of not more than ONE (1) year from the date of the claim to permit the door panel to adjust to temperature and humidity in its installed position.

• The performance of windows and doors may be affected by factors beyond CRESTLINE’S control. Examples include handling and installation, construction details of the building, exposure conditions, maintenance, normal wear and tear, and migration of inert gas. Structural or thermal ratings are for comparison purposes only. While CRESTLINE products are manufactured to meet or exceed published ratings, it is not possible to guarantee that they will meet or exceed those ratings after they have been installed.

• CRESTLINE is not responsible for removing any defective products from the structure in which they are installed, or for installing any replacement products or components provided by CRESTLINE pursuant to this limited warranty, or for any painting, refinishing or other work necessary to complete the installation of replacement products or components, all of which shall be the consumer’s responsibility.

CLASS ACTION AND JURY TRIAL WAIVERYOU AGREE THAT ANY DISPUTE TO INCLUDE, BUT NOT LIMITED TO, BREACH OF CONTRACT, BREACH OF WARRANTY, CLAIMS BASED IN TORT, NEGLIGENCE, PRODUCT LIABILITY, FRAUD, MARKETING, STATE OR FEDERAL REGULATIONS, ANY CLAIMS REGARDING THE ENFORCEABILITY OF THIS LIMITED WARRANTY, AND THE WAIVER OF JURY AND CLASS ACTION TRIALS (“DISPUTED CLAIMS”) MUST BE BROUGHT IN YOUR INDIVIDUAL CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY PURPORTED CLASS OR REPRESENTATIVE PROCEEDING. YOU ALSO AGREE THAT YOU ARE WAIVING THE RIGHT TO A TRIAL BY JURY AND AGREE TO HAVE ALL DISPUTES HEARD AND DECIDED SOLELY BY A STATE OR FEDERAL COURT.

OPT-OUT PROCEDUREYOU MAY CHOOSE TO OPT OUT OF THE CLASS ACTION AND JURY TRIAL WAIVER BY SUBMITTING A WRITTEN OPT-OUT FORM THAT CAN BE FOUND ON CRESTLINES WEBSITE, www.crestlinewindows.com/optout.pdf, WITHIN SIXTY (60) DAYS FROM THE DATE YOUR CRESTLINE PRODUCT IS INSTALLED. OPTING OUT OF THE CLASS ACTION AND JURY TRIAL WAIVER WILL NOT AFFECT ANY OTHER TERMS OF THIS LIMITED WARRANTY WHICH WILL REMAIN IN EFFECT.

GENERAL PROVISIONSSelection and purchase of CRESTLINE products which conform to all applicable building codes and local ordinances is the sole responsibility of the architect, building contractor or homeowner. CRESTLINE assumes no responsibility for compliance with local building codes or ordinances, or for calculation and design of support mullions, structural support, or flashing required for installation. Consult with your local building code officials and/or a qualified contractor, architect or engineer for specific requirements.

THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT AS SET FORTH HEREIN. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE PERIODS OF COVERAGE OF THE EXPRESS WARRANTIES SET FORTH IN THIS LIMITED WARRANTY. CRESTLINE SHALL NOT BE LIABLE FOR APPLICABLE TAXES OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS TO PERSONS OR OTHER PROPERTY.

Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If any clause herein is found to be illegal or unenforceable, that clause will be severed from this Limited Warranty and the remainder of the LimitedWarranty will be given full force and effect.

NO DISTRIBUTOR, SALESPERSON, DEALER, RETAILER OR OTHER REPRESENTATIVE OF CRESTLINE PRODUCTS HAS THE AUTHORITY TO ALTER OR CHANGE THESE WARRANTIES OR TO MAKE ANY OTHER WARRANTY EITHER VERBALLY OR IN WRITING.

EFFECTIVE DATE: JUNE 1, 2016

19

C r e s t l i n e V i n y l W i n d o w s a n d D o o r s20

Technical SpecificationsSELECT 250/350 Single Hung Windows ...............................21 Double Hung Windows ............................28 Single Gliding Windows ............................34 Casement Windows .................................37 Awning Windows ......................................43 Sliding Patio Doors ....................................46 French Sliding Patio Doors .......................49 Specialty Shapes ......................................51 Accessories ................................................53

C r e s t l i n e V i n y l W i n d o w s a n d D o o r s 21

SING

LE HUN

G

ADDITIONAL INFORMATION• Factory mulling and/or stacking is limited to 120"

wide and 106" high or a combined total of no more than 192 united inches (width plus height)

• 7'0" heights and larger must be field mulled • Drywall prep option is available• Drywall prep option cannot be added to High

Performance DP50 Single Hungs

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated glass• 3 1/4" frame extrusion• Full length sash pull

• Color matched jamb balances• Sash locks applied• 1/2 screen applied• Integral nailing fin

Select 250/350 Single Hung Window Elevations


SIN

GLE

HUN

G

Mulling formula: Two times frame width plus .500 or two times RO, then subtract .500For example any Select 250/350 2-0 product measures 23.5 overall frame width with a RO of 24. Two times 23.5 equals 47 add .5 equals 47.5 or two times 24" equals 48 minus .500 equals 47.5 this holds true for SH, DH, SS, CSMT, AWN.

Select 250/350 Single Hung Window Elevations (cont'd)

Optional Sash ConfigurationsAvailable in 3-6 to 5-6 heights, and all widths.

2-Wide and 3-Wide Configurations


SING

LE HUN

G

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Integral nailing fin

ADDITIONAL INFORMATION• Factory mulling and/or stacking is limited to 120" wide and 106"

high or a combined total of no more than 192 united inches (width plus height)


Select 250/350 Single Hung Picture Window Elevations


SIN

GLE

HUN

G

Select 250/350 Single Hung Picture Window Elevations (cont'd)






SING

LE HUN

G

Select 250/350 Single Hung Eyebrow Window Elevations

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated glass• 3 1/4" frame extrusion• Full length sash pull

• Color matched jamb balances• Sash locks applied• 1/2 screen applied• Integral nailing fin


SIN

GLE

HUN

G

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated glass• 3 1/4" frame extrusion• Integral nailing fin



Select 250/350 Single Hung Transom Window Elevations


SING

LE HUN

G

Select 250/350 Single Hung Window Direct Set – Quarter Circle, Half Circle & Full Circle Elevations

Base Code

Frame Size 3'-0" x 3'-0"

Rough Opening 3'-1/2" x 3'-1/2"

Soft Metric R.O. (mm) 927 x 927

36

Base Code

Frame Size 2'-5 1/2" x 2'-5 1/2" 2'-11 1/2" x 2'-11 1/2" 3'-5 1/2" x 3'-5 1/2"

Rough Opening 2'-6" x 2'-6" 3'-0" x 3'-0" 3'-6" x 3'-6"

Soft Metric R.O. (mm) 762 x 762 914 x 914 1067 x 1067

Base Code

Frame Size 3'-11 1/2" x 3'-11 1/2"" 4'-11 1/2" x 4'-11 1/2"

Rough Opening 4'-0" x 4'-0" 5'-0" x 5'-0"

Soft Metric R.O. (mm) 1219 x 1219 1524 x 1524

Base Code

Frame Size 1'-11 1/2" x 11 3/4" 2'-5 1/2" x 1'-2 3/4" 2'-7 1/2" x 1'-3 3/4" 2'-11 1/2" x 1'-5 3/4"

Rough Opening 2'-0" x 1'-0 1/4" 2'-6" x 1'-3 1/4" 2'-8" x 1'-4 1/4" 3'-0" x 1'-6 1/4"

Soft Metric R.O. (mm) 610 x 311 762 x 387 813 x 413 914 x 464

Base Code

Frame Size 3'-5 1/2" x 1'-8 3/4" 3'-11 1/2" x 1'-11 3/4" 4'-11 1/2" x 2'-5 3/4" 5'-11 1/2" x 2'-11 3/4"



Note: When ordering a quarter circle you must specify right or left hand from the exterior.


DO

UBLE

HUN

G

Select 250/350 Double Hung Window Elevations

ADDITIONAL INFORMATION• Factory mulling and/or stacking is

limited to 120" wide and 106" high or a combined total of no more than 192 united inches (width plus height)

• Vinyl (White)• Insulated glass• 3 1/4" frame extrusion• Full length sash pull• Color matched jamb

balances

• Sash locks applied• Full screen applied• Integral nailing fin

PRODUCT DESCRIPTIONSet-up base unit includes:


DO

UBLE HUN

G

Optional Sash ConfigurationsAvailable for these heights, and all widths.

2-Wide and 3-Wide Configurations

Select 250/350 Double Hung Window Elevations (cont'd)



DO

UBLE

HUN

G

Select 250/350 Double Hung Picture Window Elevations


ADDITIONAL INFORMATIONFactory mulling and/or stacking is limited to 120" wide and 106" high or a combined total of no more than 192 united inches (width plus height)


DO

UBLE HUN

G


ADDITIONAL INFORMATIONFactory mulling and/or stacking is limited to 120" wide and 106" high or a combined total of no more than 192 united inches (width plus height)

Select 250/350 Double Hung Picture Window Elevations (cont'd)


DO

UBLE

HUN

G


ADDITIONAL INFORMATIONFactory mulling and/or stacking is limited to 120"wide and 106" high or a combined total of no more than 192 united inches (width plus height)

Select 250/350 Double Hung Transom Window Elevations


DO

UBLE HUN

G


ADDITIONAL INFORMATION• Factory mulling and/or stacking is limited to 120"wide and 106" high or a

combined total of no more than 192 united inches (width plus height)

Base Code

Frame Size 2'-5 1/2" x 2'-5 1/2" 2'-11 1/2" x 2'-11 1/2" 3'-5 1/2" x 3'-5 1/2"

Rough Opening 2'-6" x 2'-6" 3'-0" x 3'-0" 3'-6" x 3'-6"


Glass Size 2'-2 15/32" x 2'-2 15/32" 2'-8 15/32" x 2'-8 15/32" 3'-2 15/32" x 3'-2 15/32"

Base Code

Frame Size 3'-11 1/2" x 3'-11 1/2"" 4'-11 1/2" x 4'-11 1/2"

Rough Opening 4'-0" x 4'-0" 5'-0" x 5'-0"

Soft Metric R.O. (mm) 1219 x 1219 1524 x 1524

Glass Size 3'-8 15/32" x 3'-8 15/32" 4'-8 15/32" x 4'-8 15/32"

Base Code

Frame Size 1'-11 1/2" x 11 3/4" 2'-5 1/2" x 1'-2 3/4" 2'-7 1/2" x 1'-3 3/4" 2'-11 1/2" x 1'-5 3/4"



Glass Size 1'-8 9/32" x 8 3/4" 2'-2 11/32" x 11 3/4" 2'-2 11/32" x 11 3/4" 2'-8 3/8" x 1'-2 3/4"

Select 250/350 Double Hung Window – Direct Set – Quarter Circle & Half Circle Elevations

Base Code

Frame Size 3'-5 1/2" x 1'-8 3/4" 3'-11 1/2" x 1'-11 3/4" 4'-11 1/2" x 2'-5 3/4" 5'-11 1/2" x 2'-11 3/4"



Glass Size 3'-2 3/8" x 1'-5 3/4" 3'-8 13/32" x 1'-8 3/4" 4'-8 13/32" x 2'-2 3/4" 5'-8 7/16" x 2'-8 3/4"



SIN

GLE

GLI

DIN

G

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Full length integral sash pull• Sash locks applied• 1/2 screen applied• Integral nailing fin

ADDITIONAL INFORMATION• Standard handing option for a two panel rolling window is

left side operating from the exterior. Right side operating is available for an additional charge. Please specify operation.

Standard Operation-Viewing from Exterior

Select 250/350 Single Gliding Window Elevations


TRIPLE GLID

ING

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Full length integral sash pull• Sash locks applied• Screen applied• Integral nailing fin

ADDITIONAL INFORMATION

• Maximum venting width is 31-7/8".

• Check local building codes for egress.

• 3-Panel Slider windows cannot be factory mulled or stacked

OSL1

OSL1

fixed

fixedFixed

Select 250/350 Triple Gliding Window Elevations Triple Slider Windows - End Vent 1/4 - 1/2 - 1/4

Triple Slider Windows - End Vent 1/3 - 1/3 - 1/3


SIN

GLE

GLI

DIN

G

1⁄2 ROUNDS1⁄2 ROUNDS1⁄2 ROUNDS

1⁄2 ROUNDS1⁄2 ROUNDS1⁄2 ROUNDS

Base Code 26 30 36

Frame Size 2'-5 1/2" x 1'-2 3/4" 2'-11 1/2" x 1'-5 3/4" 3'-5 1/2" x 1'-8 3/4"

Rough Opening 2'-6" x 1'-3 1/4" 3'-0" x 1'-6 1/4" 3'-6" x 1'-9 1/4"


Glass Size 2'-2 11/32" x 11 3/4" 2'-8 3/8" x 1'-2 3/4" 3'-2 3/8" x 1'-5 3/4"

Base Code 40 50 60

Frame Size 3'-11 1/2" x 1'-11 3/4" 4'-11 1/2" x 2'-5 3/4" 5'-11 1/2" x 2'-11 3/4"

Rough Opening 4'-0" x 2'-0 1/4" 5'-0" x 2'-6 1/4" 6'-0" x 3'-0 1/4"


Glass Size 3'-8 13/32" x 1'-8 3/4" 4'-8 13/32" x 2'-2 3/4" 5'-8 7/16" x 2'-8 3/4"


Select 250/350 Gliding Window – Direct Set – Half Circle Elevations


CA

SEMEN

T

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Sash locks applied• Full screen applied• Integral nailing fin

ADDITIONAL INFORMATION

• Factory mulling and/or stacking is limited to 120" wide and 106" high or a combined total of no more than 192 united inches (width plus height)

• Sash opens 90° for easy clean-ing from indoors

Select 250/350 Casement Window Elevations

2, 3, 4 and 5-Wide Configurations


CA

SEM

ENT

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Sash locks applied• Full screen applied• Rigid nailing fin

Standard Colonial Grille Patterns Shown

Select 250/350 Casement Window Quarter Eyebrow & Quarter Archtop with Legs 2-wide Elevations


CA

SEMEN

T

Select 250/350 Casement Window – Picture Elevations


ADDITIONAL INFORMATION• Factory mulling and/or stacking is limited to 120" wide and 106" high or a combined total of no more than 192 united inches (width plus height)

Frame Size 2'-11 1/2" 3'-5 1/2" 3'-11 1/2" 4'-11 1/2" 5'-11 1/2"

Rough Opening 3'-0" 3'-6" 4'-0" 5'-0" 6'-0"

Soft Metric R.O. (mm) 914 1067 1219 1524 1829

Glass Size 30 1/8" 36 1/8" 42 1/8" 54 1/8" 66 1/8"

5'

-11

1/2"

5'

-5 1

/2"

4'-1

1 1/

2"

4'-5

1/2

" 3'

-11

1/2"

3'

-5 1

/2"

2'-1

1 1/

2"

2'-5

1/2

" 1'

-11

1/2"

6'

-0"

5'-6

" 5'

-0"

4'-6

" 4'

-0"

3'-6

" 3'

-0"

2'-6

" 2'

-0"

18

29

1676

15

24

1372

12

19

1067

91

4 76

2 61

0

66

1/8

" 60

1/8

" 54

1/8

" 48

1/8

" 42

1/8

" 36

1/8

" 30

1/8

" 24

1/8

" 18

1/8

"



CA

SEM

ENT



Select 250/350 Casement Window – Transom Elevations

Frame Size 1'-5 1/2" 1'-7 1/2" 1'-11 1/2 2'-5 1/2" 2'-11 1/2" 3'-5 1/2" 3'-11 1/2"

Rough Opening 1'-6" 1'-8" 2'-0" 2'-6" 3'-0" 3'-6" 4'-0"

Soft Metric R.O. (mm) 457 508 610 762 914 1067 1219

Glass Size 12 1/8" 14 1/8" 18 1/8" 24 1/8" 30 1/8" 36 1/8" 42 1/8"

2'

-11

1/2"

2'

-5 1

/2"

1'-1

1 1/

2"

1'-5

1/2

"

3'

-0"

2'-6

" 2'

-0"

1'-6

"

91

4 76

2 61

0 45

7

2'

-6 1

/8"

24 1

/8"

18 1

/8"

12 1

/8"


Frame Size 4'-11 1/2" 5'-11 1/2"

Rough Opening 5'-0" 6'-0"

Soft Metric R.O. (mm) 1524 1829

Glass Size 54 1/8" 66 1/8"

2'

-11

1/2"

2'

-5 1

/2"

1'-1

1 1/

2"

1'-5

1/2

"

3'

-0"

2'-6

" 2'

-0"

1'-6

"

91

4 76

2 61

0 45

7

2'

-6 1

/8"

24 1

/8"

18 1

/8"

12 1

/8"



CA

SEMEN

T

Select 250/350 Casement Window Direct Set – Quarter Circle & Half Circle Elevations



Base Code

Frame Size 1'-5 1/2" x 1'-5 1/2" 1'-7 1/2" x 1'-7 1/2" 1'-11 1/2" x 1'-11 1/2" 2'-5 1/2" x 2'-5 1/2"

Rough Opening 1'-6" x 1'-6" 1'-8" x 1'-8" 2'-0" x 2'-0" 2'-6" x 2'-6"


Base Code

Frame Size 2'-11 1/2" x 2'-11 1/2"" 3'-5 1/2" x 3'-5 1/2" 3'-11 1/2" x 3'-11 1/2" 4'-11 1/2" x 4'-11 1/2"



Base Code

Frame Size 1'-11 1/2" x 11 3/4" 2'-5 1/2" x 1'-2 3/4" 2'-11 1/2" x 1'-5 3/4" 3'-3 1/2" x 1'-7 3/4"



Base Code

Frame Size 3'-5 1/2" x 1'-8 3/4" 3'-11 1/2" x 1'-11 3/4" 4'-11 1/2" x 2'-5 3/4" 5'-11 1/2" x 2'-11 3/4"





CA

SEM

ENT

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Sash locks applied• Full screen applied• Integral nailing fin

Frame Size 2'-11 1/2" 3'-11 1/2" 4'-11 1/2"

Rough Opening 3'-0" 4'-0" 5'-0"

Soft Metric R.O. (mm) 914 1219 1524

Glass Size 13 1/8" 18 1/16" 24 1/16"

4'-1

1 1/

2"

4'-5

1/2

" 3'

-11

1/2"

3'

-5 1

/2"

2'-1

1 1/

2"

2'-5

1/2

"

5'-0

" 4'

-6"

4'-0

" 3'

-6"

3'-0

" 2'

-6"

1524

13

72

1219

10

67

914

762

54 1

/16"

48

1/1

6"

42 1

/16"

36

1/1

6"

30 1

/16"

24

1/1

6"


Select 250/350 Casement Window – French Casement Elevations


AW

NIN

G

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Sash lock applied• Full screen applied• Integral nailing fin


Frame Size 1'-11 1/2" 2'-11 1/2" 3'-3 1/2" 3'-5 1/2" 3'-11 1/2" 4'-5 1/2" 4'-11 1/2"

Rough Opening 2'-0" 3'-0" 3'-4" 3'-6" 4'-0" 4'-6" 5'-0"

Soft Metric R.O. (mm) 610 914 1016 1067 1219 1376 1524

Glass Size 18 1/16" 30 1/16" 34 1/16" 36 1/16" 42 1/16" 48 1/16" 54 1/16"


3'-5

1/2

" 3'

-3 1

/2"

2'-1

1 1/

2"

2'-5

1/2

" 1'

-11

1/2"

1'

-5 1

/2"

3'-6

" 3'

-4"

3'-0

" 2'

-6"

2'-0

" 1'

-6"

1067

10

16

914

762

610

457

36 1

/16"

34

1/1

6"

30 1

/16"

24

1/1

6"

18 1

/16"

12

1/1

6"

Select 250/350 Awning Window Elevations


AW

NIN

G

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Sash lock applied• Full screen applied• Integral nailing fin


Frame Size 1'-11 1/2" 2'-11 1/2" 3'-5 1/2" 3'-11 1/2"

Rough Opening 2'-0" 3'-0" 3'-6" 4'-0"

Soft Metric R.O. (mm) 610 914 1067 1219

Glass Size 18 1/16" 30 1/16" 36 1/16" 42 1/16"


6'

-5 1

/2"

5'-1

1 1/

2"

6'

-6"

6'-0

"

19

81

1829

24

1/1

6" /

42

1/8"

18

1/1

6" /

42

1/8"

Select 250/350 Awning Window Elevations


AW

NIN

GPRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated glass• 3 1/4" frame extrusion• Integral nailing fin


Select 250/350 Awning Window Direct Set – Quarter Circle & Half Circle Elevations

Base Code

Frame Size 1'-5 1/2" x 1'-5 1/2" 1'-7 1/2" x 1'-7 1/2" 1'-11 1/2" x 1'-11 1/2" 2'-5 1/2" x 2'-5 1/2"



Base Code

Frame Size 2'-11 1/2" x 2'-11 1/2"" 3'-5 1/2" x 3'-5 1/2" 3'-11 1/2" x 3'-11 1/2" 4'-11 1/2" x 4'-11 1/2"



Base Code

Frame Size 1'-11 1/2" x 11 3/4" 2'-5 1/2" x 1'-2 3/4" 2'-11 1/2" x 1'-5 3/4" 3'-3 1/2" x 1'-7 3/4"



Base Code

Frame Size 3'-5 1/2" x 1'-8 3/4" 3'-11 1/2" x 1'-11 3/4" 4'-11 1/2" x 2'-5 3/4" 5'-11 1/2" x 2'-11 3/4"





SLID

ING

PA

TIO

DO

ORS

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated Tempered Glass• 4-3/4" frame extrusion• Integral nailing fin

Frame Size 2'-7 5/8" 3'-1 5/8" 3'-4 5/8" 4'-1 5/8"

Rough Opening 2'-8 1/8" 3'-2 1/8" 3'-5 1/8" 4'-2 1/8"

Soft Metric R.O. (mm) 816 967 1060 1273

Glass Size 25 3/8" 31 3/8" 34 3/8" 43 3/8"

7'

-11

3/4"

6'

-11

1/2"

6'

-9 3

/4"

6'-7

3/4

"

8'

-0"

7'-0

" 6'

-10"

6'

-8"

24

38

2134

20

83

2032

89

1/2

" 77

1/4

" 75

1/2

" 73

1/2

"


Select 250/350 Sliding Patio Doors – 1 & 2 Panel Elevations


SLIDIN

G PA

TIO D

OO

RS


PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated Tempered Glass• 4-3/4" frame extrusion• Integral nailing fin• Standard handle included • Optional Screen

* THE 6670 DOOR IS SIZED TO MEET ADA HANDICAP CLEAR OPENING REQUIREMENTS. THE CLEAR OPENING IS 33.47" IN WIDTH AND 80.59" IN HEIGHT. THE 6670 DOOR WILL ONLY MEET THE ADA CLEAR OPENING REQUIREMENTS. SILL HEIGHT DOES NOT MEET CODES.

Frame Size 4'-11 1/2" 5'-11 1/2" 6'-5 1/2" 7'-11 1/2"

Rough Opening 5'-0" 6'-0" 6'-6" 8'-0"

Soft Metric R.O. (mm) 1524 1829 1981 2438

Glass Size 25 3/8" 31 3/8" 34 3/8" 43 3/8"

7'

-11

3/4"

6'

-11

3/4"

6'

-9 3

/4"

6'-7

3/4

"

8'

-0"

7'-0

" 6'

-10"

6'

-8"

24

38

2134

20

83

2032

89

1/2

" 77

1/2

" 75

1/2

" 73

1/2

"

Select 250/350 Sliding Patio Doors – 1 & 2 Panel Elevations

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White)• Insulated Tempered Glass• 4-3/4" frame extrusion• Integral nailing fin• Standard handle included • Optional Screen• Standard Operation Inact/Act/Act/Inact

Frame Size 9'-9 3/8" 11'-9 3/8" 15'-9 3/8"

Rough Opening 9'-9 7/8" 11'-9 7/8" 15'-9 7/8"

Soft Metric R.O. (mm) 2994 3604 4823

Glass Size 25 3/8" 31 3/8" 43 3/8"

7'

-11

3/4"

6'

-9 3

/4"

6'-7

3/4

"

8'

-0"

6'-1

0"

6'-8

"

24

38

2083

20

32

89

1/2

" 75

1/2

" 73

1/2

"


Select 250/350Sliding Patio Doors – 4 Panel Elevations


SLID

ING

PA

TIO

DO

ORS


ADDITIONAL INFORMATION• Radius and transom units cannot be factory stacked over 8-0 wide doors• Factory stack cannot exceed 9-0 R.O. in height

Frame Size 2'-7 5/8" 3'-1 5/8" 3'-4 5/8" 3'-7 3/8" 4'-11 1/2" 5'-11 1/2" 6'-5 1/2" 7'-11 1/2"

Rough Opening 2'-8 1/2" 3'-2 1/8" 3'-5 1/8" 4'-2 1/8" 5'-0" 6'-0" 6'-6" 8'-0"

Soft Metric R.O. (mm) 816 968 1045 1273 1524 1829 1981 2438

Glass Size 25 3/8" 31 3/8" 34 3/8" 43 3/8" 53 1/4" 65 1/4" 71 1/4" 89 1/4"

1'

-5 1

/2"

1'-3

1/2

"

1'

-6"

1'-4

"

45

7 40

6

13

1/2

" 11

1/2

"


Select 250/350 Sliding Patio Doors Direct Set – Transom & Half Circle Elevations

Sliding Patio Door Half Circles

Sliding Patio Door Eyebrow Transoms

Rough Opening

Soft Metric R.O. (mm)

Unit Dimension 4'-11 1/2" x 1'-3 1/2"

1524 x 406

5'-0" x 1'-4"

50

5'-11 1/2" x 1'-3 1/2"

1829 x 406

6'-0" x 1'-4"

60

Sliding Patio Door Elliptical Transoms

Unit Dimension

Rough Opening



Unit Dimension

Rough Opening

4'-11 1/2" x 1'-3 1/2"

5'-0" x 1'-4"

1524 x 406

50

5'-11 1/2" x 1'-3 1/2"

1829 x 406

6'-0" x 1'-4"

60

4'-11 1/2" x 2'-7 1/4"

5'-0" x 2'-7 3/4"

1524 x 806

50

6'-0" x 3'-1 3/4"

5'-11 1/2" x 3'-1 1/4'

1829 x 959

60

80

7'-11 1/2" x 1'-3 1/2"

2438 x 406

8'-0" x 1'-4"

80

7'-11 1/2" x 1'-3 1/2"

2438 x 406

8'-0" x 1'-4"

80

7'-11 1/2" x 4'-1 1/4"

2438 x 1264

8'-0" x 4'-1 3/4"

Sliding Patio Door Transoms

11 1

/2"

1'-3

1/2

"

13 1

/2"

1'-5

1/2

"

1'-6

"

457

1'-4

"

406


Glass Size

Rough Opening

Unit Dimension

5016

5014

60164216

4214

3516

3514

3216

3214

2816

2814 6014

55 1/2"

4'-11 1/2"

1524

5'-0"

67 1/2"

6'-0"

1829

5'-11 1/2"

6614

6616

8014

8016

2438

8'-0"

7'-11 1/2"

91 1/2"


FRENC

H SLID

ING

PA

TIO D

OO

RS

Frame Size 3'-3" 4'-11 1/2" 5'-11 1/2" 7'-11 1/2"

Rough Opening 3'-3 1/2" 5'-0" 6'-0" 8'-0"

Soft Metric R.O. (mm) 1003 1524 1829 2438

Glass Size 27 1/2" 21 1/2" 27 1/2" 39 1/2"

7'

-11

3/4"

6'

-9 3

/4"

6'-7

3/4

"

8'

-0"

6'-1

0"

6'-8

"

24

38

2083

20

32

84

9/3

2"

70 9

/32"

68

9/3

2"

NOTE: Two panel units are also available in reverse operation (IA)

S = StationaryIA = Right Insert Is ActiveAI = Left Insert Is Active

PRODUCT DESCRIPTIONSet-up base unit includes:• Vinyl (White) • Insulated Tempered Glass• 4-3/4" frame extrusion• Integral nailing fin• Standard handle included • Screen


Select 250/350 French Sliding Patio Doors Elevations


FREN

CH

SLI

DIN

G

PATI

O D

OO

RS


ADDITIONAL INFORMATION• Radius and transom units cannot be factory stacked over 8-0 wide doors• Factory stack cannot exceed 9-0 R.O. in height

Frame Size 3'-3" 4'-11 1/2" 5'-11 1/2" 7'-11 1/2"

Rough Opening 3'-3 1/2" 5'-0" 6'-0" 8'-0"

Soft Metric R.O. (mm) 1003 1524 1829 2438

Glass Size 32 3/4" 53 1/4" 65 1/4" 89 1/4"

1'

-5 1

/2"

1'-3

1/2

"

1'

-6"

1'-4

"

45

7 40

6

11

1/4

" 9

1/4"


Select 250/350 French Sliding Patio Doors Transom & Half Circle Simulated Sash Set Elevations


SPECIA

LTY SHA

PES

*Template is required when ordering replacement glass and interior trim for custom sizes.

A - Rough Opening WidthB - Rough Opening HeightC - Rough Opening Leg

For availability of specialty shapes not shown,contact customer service.

Speciality Shapes Radius & Geometric Elevations


SPEC

IALT

Y SH

APE

S

DUE TO THE FRAGILE NATURE OF GBG, THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.

1. Joint separation (less than 1/16")2. Large grilles could bow inside the insulated unit and touch the glass. If the grille touches the glass, condensation marks could appear.3. Grille vibration.

Grille Pattern Restrictions• 5/8" Flat GBG Minimum Outside Hub Diameter is 9"• 3/4" Profiled GBG Minimum Outside Hub Diameter is 10"• Diamond Grilles are Not Available• Profiled Radius Lite GBG Must Have 90˚ Intersections• Double Elliptical Hoops are not available•• Drawing Must Accompany Order or Quote ••

Speciality Shapes Custom Grilles Elevations

Grille Patterns*

*For available grille types, contact your Customer Service Representative.


AC

CESSO

RIES

Select 250/350 Trim Accessories

Interior Wood Casing Profiles


crestlinewindows.com

54

C r e s t l i n e V i n y l W i n d o w s a n d D o o r sC r e s t l i n e V i n y l W i n d o w s a n d D o o r s 55


V I N Y L W I N D O W S & PAT I O D O O R S

CRESTLINE®Select 250™ • Select 350™

Crestline Windows and DoorsP.O. Box 309Medford, WI 54451www.crestlinewindows.comCustomer Service: 800-826-5509

© 2016 Crestline Windows & DoorsPrinted in the USA1259236 06/16

Crestline reserves the right to change product materials, specifications and methods of manufacture without prior notice. Please verify unit dimensions and/or rough openings with your local store.

Also Available from Crestline:Select Wood Windows and Patio DoorsReplacement Windows and Doors

CRESTLINE · 2020-06-10 · Crestline Vinyl Windows and Doors TABLE OF 4-5. Overview of Product...

Documents

Transcript of CRESTLINE · 2020-06-10 · Crestline Vinyl Windows and Doors TABLE OF 4-5. Overview of Product...