CREEL - Clartech Engineers€¦ · CREEL. Plot - 413 V Road Phase - II GIDC Industrial state, Vatva...
Transcript of CREEL - Clartech Engineers€¦ · CREEL. Plot - 413 V Road Phase - II GIDC Industrial state, Vatva...
REVOLVING TYPE MODEL : IMT - R
An ISO 9001:2008Certified Company
CREEL
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Pitch Distance Horizontal x Vertical 180X180 240X240 280X280 320X320
2 No. of Tiers 10 8 7 6
3 No. of Cones in each Module 160 96 84 60
4 Range of ends 160-960 96-960 84-840 60-600
5 Creel Height 2400 mm 2400 mm 2400 mm 2400 mm
6 Module Length 1440 mm 1440 mm 1680 mm 1600 mm
Salient features :-
• M.SFabricated,verysturdy,vibrationfreestructure.
• Quickpositioningofnewconesbyturningpackageframeto180degreewithlockingfacilitybyfootpaddle.
• Threepillartypetensionerwithadjustabletensioncontrolmanually.
• Allthreadguidesareceramic.
• Recreelingispossibleduringwarpingoperation.
REVOLVING TYPE MODEL : IOT - R
CREEL
An ISO 9001:2008Certified Company
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Pitch Distance Horizontal x Vertical 180X180 240X240 280X280 320X320
2 No. of Tiers 10 8 7 6
3 No. of Cones in each Module 160 96 84 60
4 Range of ends 160-960 96-960 84-840 60-600
5 Creel Height 2400 mm 2400 mm 2400 mm 2400 mm
6 Module Length 1440 mm 1440 mm 1680 mm 1600 mm
Salient features :-
• M.SFabricated,verysturdy,vibrationfreestructure.
• Quickpositioningofnewconesbyturningpackageframeto180degreewithlockingfacilitybyfootpaddle.
• Oiltensionerwithadjustabletensioncontrol
• Allthreadguidesareceramic.
• Re-creelingispossibleduringwarpingoperation.
Micro Processor Based Controller for, •AccurateLengthofWarps. •AutoHomePosition&Re-positionofWarptable. •ConstantlinearspeedinWarping&Beaming.
“WiderangeofTabletraverse”optionsselectedfrommorethan500gearratio’s.
“FlatReed“withlateralandfineangularadjustments.
WarpingTableandCreelarecentrallyalignedautomatically.
BeamDoffing&DonningareactuatedHydraulically.
Beamingsectionisintegratedwithmachine (subjectedtoworkingwidthupto3600mm&BFDupto1000mm).
Machineisequippedwith“SafetyDevice“toavoidaccidents.
Sturdy,Compact,ModularandErgonomicallydesigned.
Model : MPGD - 800/1000
Sectional Warping Machine
An ISO 9001:2008Certified Company
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Model MPGD-800 MPGD-1000
2 BeamDiameter 800 mm 1000 mm
3 WorkingWidth 1800-3600(Instepof200mm)
4 WarpingSpeed 0-600 mts / min
5 BeamingSpeed 0-100 mts / min
6 BeamingTension upto350kgs
Salient features :-• Widerangeofwarpwidth(1800mmto3600mm)&BeamFlangeDiameter(800mm&1000mm)toselectvariouscombinations.
• Fixedconeheight-10.5°/8.5°/7°.• DynamicallybalancedMetallicdrum
of 2.5 mtrs circumference.• FrequencycontrolledACvariablespeed.• HydraulicDiscBreakersonbothsideswithautobrakingincaseofPowerfailure.
• Drumcanbestoppedatexactpositionattheend of the section.
• Warping&Beamingwithtwoseparatemotors.• Sectionwidthofstandard250mm.• PowerSupply-440V±5%,50HZ,3Phase.
Optional Accessories :-• Anti-staticdevice• Waxingdevice• LinearguidesforUCTraverse
Programmable Logic Control (PLC) for •AccurateLengthofWarps. •AutoHomePosition&Re-positionofWarptable. •ConstantlinearspeedinWarping&Beaming. •Yarnbreakagedatastorageandmemoryfacilityduringwarping&re-callduringBeaming. •ColorGraphicDisplayof5”TFT(TouchScreen). •Powersavingupto90%inHydraulicMotor(In-builtDevice). •Widerangeofpatternselectionoptions.
Machine/TabletraversethroughInductionmotor.(OptionallyServoMotorcanbeselected)
“FlatReed“withlateralandFineangularadjustments.
WarpingTable&Creelarecentrallyalignedautomatically.
BeamDoffing&DonningareactuatedHydraulically.
SeparateHeavyBeamingsection.
Machineisequippedwith“LaserSafetyDevice“toavoidaccidents.
Sturdy,Compact,ModularandErgonomicallydesigned.
Sectional Warping Machine
Model : PLID - 800/1000
An ISO 9001:2008Certified Company
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Model PLID - 800 PLID - 1000
2 BeamDiameter 800 mm 1000 mm
3 WorkingWidth 1800-4000(Instepof200mm)
4 WarpingSpeed 0-600 mts / min
5 BeamingSpeed 0-100 mts / min
6 BeamingTension upto350kgs
7 SectionWidth 50-300 mm
Salient features :-• WiderangeofWarpWidth(1800mmto4000mm)&BeamFlangeDiameter(800mmto1000mm)toselectvariouscombinations.
• FixedConeHeight-10.5°/8.5°/7°.• DynamicallybalancedMetallicDrumof2.5mtr
circumference.• Step-lesspitchcontrolbyPLCandInductionmotor(optionallyservomotor.)
• HydraulicDiscBrakesonbothsides,withautobrakingincaseofPowerFailure.
• Drumcanbestoppedatexactpositionattheend of the section.
• PowerSupply-440V±5%,50Hz,3phase.• ModemConnectivity-MachinecanbeconnectedbyModem&Telephonelinewithourcustomersupportteamforinstantdiagnosticoftroubleandonlinesolution.
Optional Accessory :-• Anti-staticdevice• Waxingdevice• Beampressingdevice• AutoTensionforBeaming• LinearMotionGuidesforUCTraverse
• ServoMotor
Programmable Logic Control (PLC) for •AccurateLengthofWarps. •AutoHomePosition&Re-positionofWarptable. •ConstantlinearspeedinWarping&Beaming. •Yarnbreakagedatastorageandmemoryfacilityduringwarping&re-callduringBeaming. •ColorGraphicDisplayof10.5”TFT(TouchScreen). •Powersavingupto90%inHydraulicMotor(In-builtDevice). •WiderangeofPatternselectionoptions. Machine/Tabletraversethroughservomotor. “FlatReed“withlateralandFineangularadjustments. WarpingTable&Creelarecentrallyalignedautomatically. BeamDoffing&DonningareactuatedHydraulically. SeparateHeavyBeamingsection. Machineisequippedwith“LaserSafetyDevice“toavoidaccidents. Sturdy,Compact,ModularandErgonomicallydesigned.
Sectional Warping Machine
Model : PLSD - 800/1000
An ISO 9001:2008Certified Company
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Model PLSD-800 PLSD-1000
2 Drum Diameter 3.14 MT 3.14 MT
3 BeamDiameter 800 mm 1000 mm
4 WorkingWidth 1800-4000(InStepof200mm)
5 WarpingSpeed 0 - 600 Mts / min
6 BeamingSpeed 0 - 100 Mts / min
7 BeamingTension Upto350kgs
Salient features :-• WiderangeofWarpWidth(1800mmto4000mm)&BeamFlangeDiameter(800mmto1000mm)toselectvariouscombinations.
• FixedConeHeight-10.5°/8.5°/7°.• DynamicallybalancedMetallicDrum
of 3.5 mts circumference.• Step-lesspitchcontrolbyPLCandservomotor.• HydraulicDiscBrakesonbothsides,withautobrakingincaseofPowerFailure.
• Drumcanbestoppedatexactpositionattheend of the section.
• PowerSupply-440V±5%,50Hz,3phase.• ModemConnectivity-MachinecanbeconnectedbyModem&Telephonelinewithourcustomersupportteamforinstantdiagnosticoftrouble&on-linesolution.Optional Accessories:-
• Anti-staticdevice• Waxingdevice• Beampressingdevice
Sectional Warping Machine
Programmable Logic Control (PLC) for •AccurateLengthofWarps. •AutoHomePosition&Re-positionofWarptable. •ConstantlinearspeedinWarping&Beaming. •Yarnbreakagedatastorageandmemoryfacilityduringwarping&re-callduringBeaming. •ColorGraphicDisplayof15”TFT(TouchScreen). •Powersavingupto90%inHydraulicMotor(In-builtDevice). •WiderangeofPatternselectionoptions. TraversebyServomotorsformachine&Warptablereciprocation(Left,Right,in&outmovements.) YarnbuiltupthroughLaserSensor. Kickbacktypefeelerrollerforcompactbeam. Programmableleasingdevice. BeamDoffing&DonningareactuatedHydraulically. SeparateHeavyBeamingsection. Machineisequippedwith“LaserSafetyDevice“toavoidaccidents. Sturdy,Compact,ModularandErgonomicallydesigned.
Model : PLSD - 800 AS /1000 AS
An ISO 9001:2008Certified Company
Plot - 413, “V” Road, Phase - II, GIDC Industrial Estate,Vatva, Ahmedabad - 382 445. INDIAPhone: +91 79 6545 2678 • Fax: +91 79 2589 3323E-mail: [email protected]: www.clartechengineers.com
1 Model PLSD-800AS PLSD-1000AS
2 BeamDiameter 800 mm 1000 mm
3 WorkingWidth 1800-4000(Instepof200mm)
4 WarpingSpeed 0 - 600 mts / min
5 BeamingSpeed 0 - 100 mts / min
6 BeamingTension upto350kgs
Optional Accessories :-• Anti-staticdevice• Waxingdevice• Beampressingdevice
Salient features :-• WiderangeofWarpWidth(1800mmto4000mm)andBeamFlangeDiameter(800mmto1000mm)toselectvariouscombinations.
• FixedConeHeight-10.5°/8.5°/7°.• DynamicallybalancedMetallicDrum
of 3.5 mts circumference.• Step-lesspitchcontrolbyPLCandservomotor.• LaserSensorstoavoidaccidents.• LinerguidesforU/cmovement.• PowerSupply-440V±5%,50Hz,3phase.• ModemConnectivity-MachinecanbeconnectedbyModem&Telephonelinewithourcustomersupportteamforinstantdiagnosticoftroubleandon-linesolution.