Creating a Conference Poster Investigating Asphaltene ...
1
Results Conclusions Experimental Setups Selected Publications Motivation Objective Investigating Asphaltene Stability in Crude Oil During Carbon Dioxide Injection Sherif M. Fakher│Advisor: Dr. Abdulmohsin Imqam Petroleum Engineering ▪ The reservoir thermodynamic conditions were found to have a strong impact on the stability of the asphaltene in the crude oil. ▪ Increasing the carbon dioxide injection pressure resulted in a decrease in the asphaltene filter cake thickness and an increase in the areal filtrate displacement. ▪ Heptane could not be used as an effective chemical agent for asphaltene mitigation since the asphaltene is insoluble in heptane. ▪ Although asphaltene was soluble in naphtha, the chemical agent could not mitigate the asphaltene plugging well. ▪ The two most effective chemical agents used in this research for asphaltene mitigation were kerosene and xylene. Overall, xylene was the best agent. Experimental Materials Acknowledgment I would like to thank MST for providing me with the Chancellor’s Distinguished Fellowship. Hydrocarbons are usually thought of as being a fluid (gas or liquid) Asphaltene is a solid component of the crude oil that is stabilized via resins or as a nano- colloid It can cause severe production problems and safety hazards in wellbores, equipment, and pipelines ▪ Investigate the factors that may impact asphaltene stability in the crude oil and quantify the effect of these factors. ▪ Determine how to reduce asphaltene precipitation and deposition and how to mitigate or alleviate asphaltene buildups ▪ Specially designed filtration setup ▪ Crude Oil from Kirk Lease, Kansas ▪ Stainless Steel tubings and connections ▪ High pressure CO 2 cylinder ▪ Filter membranes with pore sizes of 0.2, 10, and 100 nm, and 2.7 µm 1. Fakher, S. et al. Critical review of asphaltene properties and factors impacting its stability in crude oil. J Petrol Explor Prod Technol (2019). https ://doi.org/10.1007/s13202-019-00811-5. 2. Fakher, S. et al. An experimental investigation of asphaltene stability in heavy crude oil during carbon dioxide injection. J Petrol Explor Prod Technol (2019). https ://doi.org/10.1007/s13202-019-00782-7. 3. Fakher, S. and Imqam, A., 2018. An experimental investigation of immiscible carbon dioxide interactions with crude oil: Oil swelling and asphaltene agitation. https ://doi.org/10.1016/j.fuel.2020.117380. 4. Fakher, S. and Imqam, A., 2020. Asphaltene precipitation and deposition during CO2 injection in nano shale pore structure and its impact on oil recovery. https ://doi.org/10.1016/j.fuel.2018.10.039. 5. Fakher, S. et al., 2019. The Effect of Unconventional Oil Reservoirs’ Nano Pore Size on the Stability of Asphaltene During Carbon Dioxide Injection. Carbon Management Technology Conference. doi:10.7122/CMTC-558486-MS 6. Fakher, S.. Et al., 2019. Roadmap to Asphaltene Characteristics, Properties, and Presence in Crude Oils Based on an Updated Database From Laboratory Studies. Carbon Management Technology Conference. doi:10.7122/CMTC-558560-MS. 7. Fakher, S., 2019. Investigating Factors that May Impact the Success of Carbon Dioxide Enhanced Oil Recovery in Shale Reservoirs. Society of Petroleum Engineers. doi:10.2118/199781-STU. Chemistry World Asphaltene Stability Setup Asphaltene Mitigation Setup ▪ High precision camera ▪ Chemical agents (water, heptane, kerosene, naphtha, and xylene) ▪ Transparent 1000 ml glass beaker ▪ Pipettes (plastic and glass) ▪ Asphaltene Saturated Filter membranes Kerosene Naphtha Heptane Xylene Water (Reference Agent) 0 5 10 15 20 25 30 200 400 750 Asphaltene Concentration, wt% Pressure, psi 0 5 10 15 20 25 60 100 150 Asphaltene Concentration, wt% Temperature, ̊ C 0 2 4 6 8 10 12 14 16 18 20 10 100 Asphaltene Concentration, wt% Pore Size, nm 0 2 4 6 8 10 12 0.5 2 Asphaltene Concentration, wt% CO2 Soaking Time, hrs
Transcript of Creating a Conference Poster Investigating Asphaltene ...
Creating a Conference PosterAuthors or Reserachers
Department or Organization
Results
Conclusions
Experimental Setups
Selected Publications
Motivation
Objective
Investigating Asphaltene Stability in Crude Oil During
Carbon Dioxide InjectionSherif M. Fakher│Advisor: Dr. Abdulmohsin Imqam
Petroleum Engineering
▪ The reservoir thermodynamic conditions
were found to have a strong impact on the
stability of the asphaltene in the crude oil.
▪ Increasing the carbon dioxide injection
pressure resulted in a decrease in the
asphaltene filter cake thickness and an
increase in the areal filtrate displacement.
▪ Heptane could not be used as an effective
chemical agent for asphaltene mitigation
since the asphaltene is insoluble in heptane.
▪ Although asphaltene was soluble in
naphtha, the chemical agent could not
mitigate the asphaltene plugging well.
▪ The two most effective chemical agents
used in this research for asphaltene
mitigation were kerosene and xylene.
Overall, xylene was the best agent.
Experimental Materials
AcknowledgmentI would like to thank MST for providing me
with the Chancellor’s Distinguished Fellowship.
Hydrocarbons are
usually thought of as
being a fluid (gas or
liquid)
Asphaltene is a solid
component of the crude
oil that is stabilized via
resins or as a nano-
colloid
It can cause severe
production problems
and safety hazards in
wellbores, equipment,
and pipelines
▪ Investigate the factors that may impact
asphaltene stability in the crude oil and
quantify the effect of these factors.
▪ Determine how to reduce asphaltene
precipitation and deposition and how to
mitigate or alleviate asphaltene buildups
▪ Specially designed filtration setup
▪ Crude Oil from Kirk Lease, Kansas
▪ Stainless Steel tubings and connections
▪ High pressure CO2 cylinder
▪ Filter membranes with pore sizes of 0.2,
10, and 100 nm, and 2.7 µm
1. Fakher, S. et al. Critical review of asphaltene properties and factors
impacting its stability in crude oil. J Petrol Explor Prod Technol
(2019). https://doi.org/10.1007/s13202-019-00811-5.
2. Fakher, S. et al. An experimental investigation of asphaltene stability
in heavy crude oil during carbon dioxide injection. J Petrol Explor
Prod Technol (2019). https://doi.org/10.1007/s13202-019-00782-7.
3. Fakher, S. and Imqam, A., 2018. An experimental investigation of
immiscible carbon dioxide interactions with crude oil: Oil swelling
and asphaltene agitation. https://doi.org/10.1016/j.fuel.2020.117380.
4. Fakher, S. and Imqam, A., 2020. Asphaltene precipitation and
deposition during CO2 injection in nano shale pore structure and its
impact on oil recovery. https://doi.org/10.1016/j.fuel.2018.10.039.
5. Fakher, S. et al., 2019. The Effect of Unconventional Oil
Reservoirs’ Nano Pore Size on the Stability of Asphaltene
During Carbon Dioxide Injection. Carbon Management Technology
Conference. doi:10.7122/CMTC-558486-MS
6. Fakher, S.. Et al., 2019. Roadmap to Asphaltene Characteristics,
Properties, and Presence in Crude Oils Based on an Updated
Database From Laboratory Studies. Carbon Management Technology
Conference. doi:10.7122/CMTC-558560-MS.
7. Fakher, S., 2019. Investigating Factors that May Impact the Success
of Carbon Dioxide Enhanced Oil Recovery in Shale Reservoirs.
Society of Petroleum Engineers. doi:10.2118/199781-STU.
Chemistry World
Asphaltene Stability Setup Asphaltene Mitigation Setup
▪ High precision camera
▪ Chemical agents (water, heptane,
kerosene, naphtha, and xylene)
▪ Transparent 1000 ml glass beaker
▪ Pipettes (plastic and glass)
▪ Asphaltene Saturated Filter membranes
Kerosene
NaphthaHeptane
Xylene
Water
(Reference Agent)
0
5
10
15
20
25
30
200 400 750
Asp
hal
tene
Conce
ntr
atio
n, w
t%
Pressure, psi
0
5
10
15
20
25
60 100 150
Asp
hal
tene
Conce
ntr
atio
n, w
t%
Temperature, ̊ C
0
2
4
6
8
10
12
14
16
18
20
10 100
Asp
hal
tene
Conce
ntr
atio
n, w
t%
Pore Size, nm
0
2
4
6
8
10
12
0.5 2
Asp
hal
tene
Conce
ntr
atio
n, w
t%
CO2 Soaking Time, hrs
