CP5000 Control Panel - GD Systems
2
0800 052 3616 [email protected] CP5000 Control Panel • Ergonomically designed • 15” TFT flat screen display • Optional floor plan/map • Programmable reminder calls • Can add patient medical notes • Multiple zones programmable • Meets EN300-220 safety requirements Key features: E N 30 0 2 2 0 ( 2 0 0 7 ) The CP5000 15" Display Panel provides information at a glance including: text addresses for call types, locations, resident/patient names, nurse or carer ID, active call list and alarm location with optional floor plan/map. The status of calls is displayed and additional information such as patient medical notes can be called up. Five distinct alarm tones are used for call, assist, emergency, reminder and maintenance to make the system user-friendly and simple to operate. Efficiency and speed of response are essential in a care environment. This is why, as well as the vital information that can be displayed, the CP5000 also allows ‘reminder’ calls to be programmed by staff which automatically activate at preset intervals for use in the monitoring of nightly checks or to assist with timed medication. Multiple zones can be programmed and named for each panel allowing for ease of use and efficiency. The unit has an integral call logger which is very useful not only as a management tool for reporting anything thathas happened within the system but also provides reassurance to clients/patients’ families. The power-fail indicator and internal battery provide around 4 hours of back up power should there be a power cut for any reason. Being part of our Touchsafe® range of products, the CP5000 has anti-microbial additives to combat the spread of infection within the care environment.
Transcript of CP5000 Control Panel - GD Systems
0800 052 [email protected]
CP5000Control Panel
• Ergonomically designed• 15” TFT flat screen display• Optional floor plan/map• Programmable reminder calls• Can add patient medical notes• Multiple zones programmable • Meets EN300-220 safety requirements
Key features:
EN
300220 (2007)
The CP5000 15" Display Panel provides information at a glance including: text addresses for call types, locations, resident/patient names, nurse or carer ID, active call list and alarm location with optional floor plan/map. The status of calls is displayed and additional information such as patient medical notes can be called up. Five distinct alarm tones are used for call, assist, emergency, reminder and maintenance to make the system user-friendly and simple to operate.
Efficiency and speed of response are essential in a care environment. This is why, as well as the vital information that canbe displayed, the CP5000 also allows ‘reminder’ calls to be programmed by staff which automatically activate at preset intervals for use in the monitoring of nightly checks or to assist with timed medication.
Multiple zones can be programmed and named for each panel allowing for ease of use and efficiency. The unit has an integral call logger which is very useful not only as a management tool for reporting anything thathas happened within the system but also provides reassurance to clients/patients’ families.
The power-fail indicator and internal battery provide around 4 hours of back up power should there be a power cut for any reason. Being part of our Touchsafe® range of products, the CP5000 has anti-microbial additives to combat the spread of infection within the care environment.
Registered in England No. 00115834.
Aid Call, a business unit of Legrand Electric LtdUnit 4 Brunel Court, Brunel Road, Newton Abbot
Devon TQ12 4PB, Tel: 0845 600 3734 Fax: 01626 332 272Email: [email protected] Web: www.aidcall.co.uk
EN
300220 (2007 )
CP5000Specifications
• Nurse call • Warden call
OperationalModes
• Distinct alarm tones for call, assist, emergency/ HELP, reminder and maintenance• Optional Alarm tones for all alarm types• Adjustable volume control• Call mute facility (programmable)
Sounder
• Inbuilt Call Logger – downloadable to memory stick (500 records)• Optional Interface to Aid Call PC call logger applicationCall History
• Each RFE has a unique indent, any failure is identified on the screen• Up to 4 Base Receivers can be connected
Base Receivers
• Multiple zoning capabilities • Multiple common call facility • Multiple night setting facility• Multiple call type which will be displayed on selected zones, e.g. Help, emergency, assistance, call, maintenance, reminder and nurse presence
CommonCall Type
• 15 inch TFT display with 120 degree viewing angle• Text address for call location and resident names • Patient/resident details (user programmable) • Active call list and staff location list • Mapping/floor plan (optional) • Standby screen (can be changed by user)• Mains power failure indication
Display
• Depending on the operation mode the buttons are: Volume, Mute, Call accept, Map, Resident/patient Info• A Cursor button to provide basic navigation of menu driven features
FunctionButtons
• Paging information is programmed by the USB programmer and consists of zone message, alarm transmitter indent and call type• Interface for multiple paging protocols • Programmable re-page delay 15-600 seconds• Paging programmable by zone• Group codes for: Call, Assistance, Emergency, Help, , Reminder, Tamper and Maintenance • Option for different day and night pagers
Paging
• Call tone incremented to next level if call remains unanswered for 2 minutes (Optional) Active CallUpgrade
• Indication if a transmitter is not working.• Low battery indication for individual transmitters
MaintenanceNotification
• Approx 40cm by 34cm by 11cm• Approx 4.1kg without battery• Approx 6.6kg with battery
Dimensions &Weight
Safety • BS EN 60950, EMC, R&TTE Directive , ETS 301 489-1, ETS 301-489-3, RoHS/ WEEE compliant
TechnicalInformation
• Can operate on 869.250MHz or 173.255MHz frequency • Approval ETS 300 220
AC0016V2JAN14
CP5000Control Panel
• Ergonomically designed• 15” TFT flat screen display• Optional floor plan/map• Programmable reminder calls• Can add patient medical notes• Multiple zones programmable • Meets EN300-220 safety requirements
Key features:
EN
300220 (2007)
The CP5000 15" Display Panel provides information at a glance including: text addresses for call types, locations, resident/patient names, nurse or carer ID, active call list and alarm location with optional floor plan/map. The status of calls is displayed and additional information such as patient medical notes can be called up. Five distinct alarm tones are used for call, assist, emergency, reminder and maintenance to make the system user-friendly and simple to operate.
Efficiency and speed of response are essential in a care environment. This is why, as well as the vital information that canbe displayed, the CP5000 also allows ‘reminder’ calls to be programmed by staff which automatically activate at preset intervals for use in the monitoring of nightly checks or to assist with timed medication.
Multiple zones can be programmed and named for each panel allowing for ease of use and efficiency. The unit has an integral call logger which is very useful not only as a management tool for reporting anything thathas happened within the system but also provides reassurance to clients/patients’ families.
The power-fail indicator and internal battery provide around 4 hours of back up power should there be a power cut for any reason. Being part of our Touchsafe® range of products, the CP5000 has anti-microbial additives to combat the spread of infection within the care environment.
![$YDOLDomR GD 8WLOL]DomR GD 6HTXrQFLD ' 7 Z HP …](https://static.fdocuments.net/doc/165x107/62bab7b2e0da5545dc7b59ad/ydoldomr-gd-8wloldomr-gd-6htxrqfld-7-z-hp-.jpg)
