COURSE : ANSYS - CFD (CAE)msmetcbhopal.org/docs/STC-CAE.pdf · 2020. 5. 16. · Introduction To FEA...
3
MSME TECHNOLOGY CENTER BHOPAL Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal, MADHYA PRADESH, India - 462038. Logon Here : https://forms.gle/ePb8UGiu1PbZCjau5 For Inquiry Form CONTACT ON Log on for course details MSME Technology Centre, Bhopal - City Centre, FIRST FLOOR,MPLUN BUILDING,35, SULTANIYA ROAD, IMAMI GATE, BHOPAL – 462001. (MP) & MSME Technology Centre, Bhopal – Acharpura, Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal-462038. Phone: 0755-2731043/44, 9373161257/58, E-Mail: [email protected] Applications are invited in the prescribed form for admission in the following short term courses at Acharpura Bhopal / City center Bhopal. MSME TECHNOLOGY CENTER, BHOPAL Government of India Society Ministry of Micro, Small and Medium Enterprises ADMISSION NOTICE FOR NSQF COMPLIANT SHORT TERM COURSES Scan For Inquiry Form COURSE : ANSYS - CFD (CAE) DURATION 72 HRS 3 WEEKS (4 HRS/DAY) Diploma Or Degree In Mechanical, Production, Automobile Engineering or Equivalent. ELIGIBILITY COURSE FEES REG.FEES - Rs.300/- TUITION FEES – Rs.11,000/- + GST 18% Extra On Registration Fees & Course Fees. No tuition fee will be charged for SC/ST Candidates. Introduction To CFD, CFX & Fluent, Design Modeler, Meshing, Turbulent Models, Boundary Condition Specifications Solver Solution Methods & Hydrodynamic, Aerodynamic, Heat Transfer/ Thermal Analysis Int.& Ext. Flows, Post-processing / Results COURSE CONTENT Note: Registrations for the above course is under progress & Registration on first come first serve basis. New batch will be started from the First & Third Monday of every month for all courses.
Transcript of COURSE : ANSYS - CFD (CAE)msmetcbhopal.org/docs/STC-CAE.pdf · 2020. 5. 16. · Introduction To FEA...
MSME TECHNOLOGY CENTER BHOPAL Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal,
MADHYA PRADESH, India - 462038.
Logon Here : https://forms.gle/ePb8UGiu1PbZCjau5 For Inquiry Form
CONTACT ON
Log on for course details MSME Technology Centre, Bhopal - City Centre,
FIRST FLOOR,MPLUN BUILDING,35,SULTANIYA ROAD, IMAMI GATE,
BHOPAL – 462001. (MP) &
MSME Technology Centre, Bhopal – Acharpura,Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal-462038.Phone: 0755-2731043/44, 9373161257/58,E-Mail: [email protected]
Applications are invited in the prescribed form for admission in the following short term courses at Acharpura Bhopal / City center Bhopal.
MSME TECHNOLOGY CENTER, BHOPALGovernment of India Society
Ministry of Micro, Small and Medium Enterprises
ADMISSION NOTICE FOR NSQF COMPLIANT SHORT TERM COURSES
Scan For Inquiry Form
COURSE : ANSYS - CFD (CAE)
DURATION
72 HRS3 WEEKS
(4 HRS/DAY)
Diploma Or Degree InMechanical, Production,Automobile Engineeringor Equivalent.
ELIGIBILITY
COURSE FEES
REG.FEES - Rs.300/-TUITION FEES – Rs.11,000/-+ GST 18% Extra On Registration Fees & Course Fees. No tuition fee will be charged for SC/ST Candidates.
Introduction To CFD, CFX & Fluent,Design Modeler, Meshing, Turbulent
Models, Boundary Condition Specifications Solver Solution
Methods & Hydrodynamic, Aerodynamic, Heat Transfer/
Thermal Analysis Int.& Ext. Flows, Post-processing / Results
COURSE CONTENT
Note: Registrations for the above course is under progress & Registration on first come first serve basis. New batch will be started from the First & Third Monday of every month for all courses.
MSME TECHNOLOGY CENTER BHOPAL Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal,
MADHYA PRADESH, India - 462038.
https://forms.gle/ePb8UGiu1PbZCjau5
CONTACT ON
Log on for course details MSME Technology Centre, Bhopal - City Centre,
FIRST FLOOR,MPLUN BUILDING,35,SULTANIYA ROAD, IMAMI GATE,
BHOPAL – 462001. (MP) &
MSME Technology Centre, Bhopal – Acharpura,Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal-462038.Phone: 0755-2731043/44, 9373161257/58,E-Mail: [email protected]
Applications are invited in the prescribed form for admission in the following short term courses at Acharpura Bhopal / City center Bhopal.
MSME TECHNOLOGY CENTER, BHOPALGovernment of India Society
Ministry of Micro, Small and Medium Enterprises
ADMISSION NOTICE FOR NSQF COMPLIANT SHORT TERM COURSES
Scan For Inquiry Form
Registrations for the above course is under progress & Registration on first come first serve basis. New batch will be started from the First & Third Monday of every month for all courses.
Introduction To FEA ANSYS & Different Types Of Interfaces
ANSYS Basics General Analysis Procedure Structural Analysis
Thermal Analysis Modal Analysis
REG.FEES - Rs.300/-TUITION FEES – Rs.9,000/-+ GST 18% Extra On Registration Fees & Course Fees. No tuition fee will be charged for SC/ST Candidates.
Diploma Or Degree InMechanical, Production,Automobile Engineeringor Equivalent.
72 HRS3 WEEKS
(4 HRS/DAY)
MSME TECHNOLOGY CENTER BHOPAL Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal,
MADHYA PRADESH, India - 462038.
Logon Here : https://forms.gle/ePb8UGiu1PbZCjau5 For Inquiry Form
CONTACT ON
Log on www.msmetcbhopal.org for course details MSME Technology Centre, Bhopal - City Centre,
FIRST FLOOR,MPLUN BUILDING,35,SULTANIYA ROAD, IMAMI GATE,
BHOPAL – 462001. (MP) &
MSME Technology Centre, Bhopal – Acharpura,Plot No. 259/2, 261, 267/2/1, Industrial Estate, Special Education Zone, Acharpura Bhopal-462038.Phone: 0755-2731043/44, 9373161257/58,E-Mail: [email protected]
Applications are invited in the prescribed form for admission in the following short term courses at Acharpura Bhopal / City center Bhopal.
MSME TECHNOLOGY CENTER, BHOPALGovernment of India Society
Ministry of Micro, Small and Medium Enterprises
ADMISSION NOTICE FOR NSQF COMPLIANT SHORT TERM COURSES
Scan For Inquiry Form
Note: Registrations for the above course is under progress & Registration on first come first serve basis. New batch will be started from the First & Third Monday of every month for all courses.
COURSE : HYPERMESH (CAE)
Introduction To FEA , Hyper Mesh Geometry Creation
2d Meshing 3d MeshingMesh Analysis OPTISTRUCTIntroduction To Hyper form
Hyper View
COURSE CONTENT
DURATION
72 HRS3 WEEKS
(4 HRS/DAY)
COURSE FEES
REG.FEES - Rs.300/-TUITION FEES – Rs.9,000/-+ GST 18% Extra On Registration Fees & Course Fees. No tuition fee will be charged for SC/ST Candidates.
Diploma Or Degree InMechanical, Production,Automobile Engineeringor Equivalent.
ELIGIBILITY
![Wing meshing in SALOME - · PDF fileTUT1101R0 Wing meshing in SALOME Table of Contents 1 Log of revisions ... the SALOME meshing software [ref 2]. The mesh is made of both quadrangle](https://static.fdocuments.net/doc/165x107/5a9e9ecd7f8b9a67178b9cab/wing-meshing-in-salome-wing-meshing-in-salome-table-of-contents-1-log-of-revisions.jpg)
