COROMANT CAPTO TOOLHOLDING For Mori Seiki … · from Sandvik Coromant “In 1998 we awarded Chevin...
Transcript of COROMANT CAPTO TOOLHOLDING For Mori Seiki … · from Sandvik Coromant “In 1998 we awarded Chevin...
COROMANT CAPTO® TOOLHOLDINGFor Mori Seiki Machines
Issue 1
Presetters
Our Extensive RangeLive Units
Split Boring Bar Holders & Bushes
Coromant Capto® Toolholders for all leading machines
Special Holders
A word from Sandvik Coromant“In 1998 we awarded Chevin Tools a license to design, manufacture and market tool holders incorporating Coromant Capto®. Our close collaboration with this key international partner enables the continuing development of these successful products.”Ronald SchreiberManager - Tooling Systems
Chevin Tools is at the forefront of developing toolholders incorporating Coromant Capto® quick change tooling.
During our long partnership with Sandvik we have created a wide variety of Coromant Capto® toolholders for many leading manufacturers. Alongside our standard range, we also design and manufacture a number of innovative
products and special applications.
Live Coromant Capto® UnitsReduce set-up times, improve finish quality and enable the production of complex parts with our range of Live Holders.
Integrated Coromant Capto® TurretsIntegrated Turrets offer increased rigidity, rapid tool change, larger work envelope, quicker set-up times, off-line tool setting and through-tool coolant to every station. Options include turrets with two clamping stations at each position, and we have developed a range of accessories to increase the versatility of the turrets.
Coromant Capto® PresettersReduce downtime with precision off-line tool setting.
Special ApplicationsChevin Tools design and manufacture one-off Coromant Capto® toolholders to meet specific customer requirements.
Split Boring Bar Holders & BushesBenefits of our Split and Hinged Boring Bar Holders include compatability with anti-vibration bars, increased cutting performance, deeper boring capability (up to 10 times diameter) and increased performance over standard boring bars. We also offer Split Reduction Bushes for use with smaller diameter boring bars.
Our product range is always expanding. If you can’t see the toolholder you need in this catalog, contact us to discuss your requirements.
Integrated Turrets
Coromant Capto® Toolholding For Mori Seiki Machines
How to use this Catalog • Find your Mori Seiki machine in the tables on pages 10-13, select the toolholder style and option you require (e.g. Boring Holder, C4) and note the Product Code.• Check your requirements against the type diagrams shown on pages 5-9.• Select the Direction of Rotation required using the illustrations below and replace * in the Product Code with R or L.
Please note that type diagrams and tables for Presetters can be found on page 14.The information in this catalog is correct at the time of going to press and is subject to change.
Boring (Internal) Holders
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Drawn by Checked by File reference Date
Customer
Sheet
/
ScaleSimilar toCRAFTSMAN TOOLS LTDSide Copse, Pool Road, Otley,West Yorkshire,
England. LS21 1JETel: #44 (0)1943 466788Fax: #44 (0)1943 850144www.craftsmantools.com
TOLERANCES (Where not stated)No decimal place +/-0,5mmOne decimal place +/-0,1mmTwo decimal places +/-0,05mmNOTEAll dimensions are in mm unless stated.Remove all burrs and sharp edges.
THIRD ANGLE PROJECTION
REMOVE ALL BURRS & SHARP EDGESIF IN DOUBT - ASK
IssueDrawing
ORIENTATION DIAGRAM -CAPTO INTERNAL
17/11/2005
1 1
Capto C6 LH Internal Orientation.iam
CDS
MAIN SPINDLE ROTATIONRIGHT HAND CLAMPING UNITRIGHT HAND CUTTING TOOL
MAIN SPINDLE ROTATIONLEFT HAND CLAMPING UNITLEFT HAND CUTTING TOOL
TOOL LOCATION
TOOL LOCATION
Main Spindle RotationRight Hand Clamping ToolRight Hand Cutting Tool
Tool Location
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Drawn by Checked by File reference Date
Customer
Sheet
/
ScaleSimilar toCRAFTSMAN TOOLS LTDSide Copse, Pool Road, Otley,West Yorkshire,
England. LS21 1JETel: #44 (0)1943 466788Fax: #44 (0)1943 850144www.craftsmantools.com
TOLERANCES (Where not stated)No decimal place +/-0,5mmOne decimal place +/-0,1mmTwo decimal places +/-0,05mmNOTEAll dimensions are in mm unless stated.Remove all burrs and sharp edges.
THIRD ANGLE PROJECTION
REMOVE ALL BURRS & SHARP EDGESIF IN DOUBT - ASK
IssueDrawing
ORIENTATION DIAGRAM -CAPTO INTERNAL
17/11/2005
1 1
Capto C6 LH Internal Orientation.iam
CDS
MAIN SPINDLE ROTATIONRIGHT HAND CLAMPING UNITRIGHT HAND CUTTING TOOL
MAIN SPINDLE ROTATIONLEFT HAND CLAMPING UNITLEFT HAND CUTTING TOOL
TOOL LOCATION
TOOL LOCATION
Main Spindle RotationLeft Hand Clamping ToolLeft Hand Cutting Tool
Tool Location
Turning (External) Holders
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Drawn by Checked by File reference Date
Customer
Sheet
/
ScaleSimilar toCRAFTSMAN TOOLS LTDSide Copse, Pool Road, Otley,West Yorkshire,
England. LS21 1JETel: #44 (0)1943 466788Fax: #44 (0)1943 850144www.craftsmantools.com
TOLERANCES (Where not stated)No decimal place +/-0,5mmOne decimal place +/-0,1mmTwo decimal places +/-0,05mmNOTEAll dimensions are in mm unless stated.Remove all burrs and sharp edges.
THIRD ANGLE PROJECTION
REMOVE ALL BURRS & SHARP EDGESIF IN DOUBT - ASK
IssueDrawing
ORIENTATION DIAGRAM -CAPTO EXTERNAL
16/11/2005
1 1
Capto C6 RH External Orientation.iam
CDS
MAIN SPINDLE ROTATIONRIGHT HAND CLAMPING UNITRIGHT HAND CUTTING TOOL
MAIN SPINDLE ROTATIONLEFT HAND CLAMPING UNITLEFT HAND CUTTING TOOL
TOOL LOCATION
TOOL LOCATION
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Drawn by Checked by File reference Date
Customer
Sheet
/
ScaleSimilar toCRAFTSMAN TOOLS LTDSide Copse, Pool Road, Otley,West Yorkshire,
England. LS21 1JETel: #44 (0)1943 466788Fax: #44 (0)1943 850144www.craftsmantools.com
TOLERANCES (Where not stated)No decimal place +/-0,5mmOne decimal place +/-0,1mmTwo decimal places +/-0,05mmNOTEAll dimensions are in mm unless stated.Remove all burrs and sharp edges.
THIRD ANGLE PROJECTION
REMOVE ALL BURRS & SHARP EDGESIF IN DOUBT - ASK
IssueDrawing
ORIENTATION DIAGRAM -CAPTO EXTERNAL
16/11/2005
1 1
Capto C6 RH External Orientation.iam
CDS
MAIN SPINDLE ROTATIONRIGHT HAND CLAMPING UNITRIGHT HAND CUTTING TOOL
MAIN SPINDLE ROTATIONLEFT HAND CLAMPING UNITLEFT HAND CUTTING TOOL
TOOL LOCATION
TOOL LOCATION
Main Spindle RotationRight Hand Clamping ToolRight Hand Cutting Tool
Tool Location
Tool Location
Main Spindle RotationLeft Hand Clamping ToolLeft Hand Cutting Tool
Direction of Rotation: Please specify Right (R) or Left (L) direction of rotation
4
Time is not money –time is lots of money
At the heart of Sandvik Coromant’sinvestment tooling philosophy is theCoromant Capto® tool holding system.
Designed to rationalise your toolmanagement process through the useof a single system for both turningand rotating tools, Coromant Capto®provides high repeatability and maximum rigidity, enabling the higest possible metal removal rates to be achieved.
No modi�cations are needed to tooling– standard tools can be used straightaway. Tool change-over times are typically reduced from 10 minutes to just 1 minute, which can mean savings of € 50,000 a year on a typical CNC lathe.
Coromant Capto®
The original.
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Type 8: Turning Holder
b2
h2
I1X
I2
I2Z
Type 5: Boring Holder Type 6: Turning Holder
Type 7: Boring Holder
b2I1X
I1Z
I2
h2
Type 4: Boring Holder
b2
h2
I1X
I1Z
I2
Type 1: Turning Holder Type 2: Boring Holder
Type 3: Turning Holder
b2
h2
I1Z
I1X
I2
Page 10 - 12 Page 10 - 12
Page 11 Page 11
Page 11 Page 11
Page 11 Page 11
b2
I1Z
h2
I2
I1X b2
h2
I1X
I2
I1Z
b2
h2
I1X
I1Z
I2
b2
h2
I2X
I2
I2Z
5 6
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Type 13: Double Turning Holder Type 14: Boring Holder
Type 15: Turning Holder
b2
h2
I2
I1Z
I1X
Type 16: Double Boring Holder
b2I1X
I2
I1Z
h2
b1
h2
I1X
I1Z I2Z
I2X
b2
I2
Type 11: Turning Holder
Type 9: Boring Holder Type 10: Boring Holder - Sub Spindle
b2
h2
I1X
I1Z
Type 12: Turning Holder - Sub Spindle
b2
h2
I1X
I1Z
Page 11 & 12 Page 11 & 12
Page 12Page 12
Page 12 Page 13
Page 13 Page 13
b2
h2
I1X
I1Z
I2
b2
h2
I1X
I1Z
I2
b2
h2
I1X
I1Z I2Z
7 8
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Part Product Code SizeDimensions (mm)
Typeb2 h2 l1X l1Z l2
SL150, SL153, SL154
Turning Holder C4-*CE-SL150-035037 C4 138 88 37 35 91 1
CL15, CL150, CL1500, DL15, DL151, SL15, SL150, SL153, SL154, ZL15, ZL150, ZL153
Boring Holder C4-*CI-SL150-035012 C4 59 88 35 12 85 2
Boring Holder - Extended C4-*CI-SL150-035060 C4 59 88 35 60 139 2
SL200, SL203, SL204, SL250, SL253, SL2500, SL300, SL303
Turning Holder C4-*CE-SL250-033043 C4 145 102 43 33 89 1
Turning Holder C5-*CE-SL250-045043 C5 165 102 43 45 104 1
Turning Holder C6-*CE-SL250-055040 C6 185 106 40 55 120 1
CL20, CL200, CL25, CL253, CL2000, SL20, SL25, SL200, SL250, SL300, SL303, SL2500, ZL20, ZL200, ZL203, ZL25, ZL250, ZL253
Boring Holder C4-*CI-SL250-040014 C4 64 102 40 14 102 2
Boring Holder - Extended C4-*CI-SL250-040053 C4 64 102 40 53 141 2
Boring Holder C5-*CI-SL250-040014 C5 72 102 40 12 102 2
Boring Holder - Extended C5-*CI-SL250-040072 C5 72 102 40 72 160 2
Boring Holder C6-*CI-SL250-050034 C6 92 106 50 34 122 2
SL35B/MC, ZL35B/MC - 10 & 12 Station Upper (B & MC) & 10 Station Lower (MC) Turrets
Boring Holder C5-*CI-SL35-040015 C5 72 118 40 15 124 2
Turning Holder C5-*CE-SL35-045030 C5 186 118 30 45 100 1
Type 17: Double Turning Holder Type 18: Boring Holder
Type 19: Turning Holder
b2h2
I1X
I1Z
b2
h2
I1X
I1Z I2Z
b2
h2I1Z
I1X
I2
Page 13 Page 13
Page 13
9 10
For more information on any of our Coromant Capto® Toolholders, or to place an order, contact Chevin Tools or your local Sandvik Coromant representative.
T: (847) 690 1278
F: (847) 690 1934
Coromant Capto® Toolholding For Mori Seiki Machines
Coromant Capto® Toolholding For Mori Seiki Machines
Part Product Code SizeDimensions (mm)
Typeb2 h2 l1X l1Z l2Z l2
MT2000, MT2500, ZT2500 (VDI Turret)
Boring Holder C4-*CI-MT2000-140043 C4 164 70 140 40 87 9
Boring Holder - Sub Spindle C4-*CI-MT2000-140043 SS C4 164 70 140 43 85 10
Turning Holder C4-*CE-MT2000-037088 C4 111 90 88 37 11
Turning Holder - Sub Spindle C4-*CE-MT2000-043088 SS C4 117 90 88 43 12
Double Turning Holder C4-*CE-MT2000-000088 DT C4 128 90 88 37 43 13
Boring Holder - Sub Spindle C5-*CI-MT2000-140055 SS C5 172 90 140 55 100 10
Boring Holder - Sub Spindle C6-*CI-MT1500-135076 SS C6 177 104 135 76 121 10
Turning Holder C6-*CE-MT2000-050115 C6 142 105 115 50 11
ZT2500 (Bolt Tightened Turret)
Turning holder C4-*CE-ZT2500-024050 C4 136 76 50 24 86 1
Boring Holder C4-*CI-ZT2500-085014 C4 109 102 85 14 102 2
Turning holder C5-*CE-ZT2500-032040 C5 152 102 40 32 83 1
Boring Holder C5-*CI-ZT2500-085016 C5 117 102 85 16 104 2
Turning Holder - Sub Spindle C5-*CE-ZT2500-119040 SS C5 159 102 40 34 83 1
Boring Holder - Sub Spindle C5-*CI-ZT2500-085096 SS C5 117 102 85 96 2
Part Product Code SizeDimensions (mm)
Typeb2 h2 l1X l1Z l2
SL45, SL400, SL403 (static turrets only), ZL45
Turning Holder C5-*CE-SL400-045050 C5 209 132 50 45 100 1
Boring Holder C5-*CI-SL400-050016 C5 82 132 50 16 148 2
Boring Holder C6-*CI-SL400-050016 C6 92 132 50 16 149 2
SL400MC, SL403MC
Turning Holder C5-*CE-SL400MC-033030 C5 195 186 30 33 100 3
Boring Holder C5-*CI-SL400MC-070100 C5 102 186 70 100 230 4
SL65, SL600, SL603 (static turrets only), SL75
Boring Holder C5-*CI-SL600-050015 C5 82 140 50 100 167 5
Boring Holder C6-*CI-SL600-050015 C6 92 140 50 100 175 5
Boring Holder C8-*CI-SL600-062117 C8 112 140 62 117 192 5
Turning Holder C5-*CE-SL600-025040 C5 217 140 40 110 118 6
Turning Holder C6-*CE-SL600-035040 C6 237 140 40 120 120 6
SL603MC
Boring Holder C6-*CI-SL603MC-070100 C6 112 160 70 100 230 7
Turning Holder C6-*CE-SL603MC-058025 C6 103 186 58 25 159 8
Boring Holder C8-*CI-SL603MC-070100 C8 120 180 70 100 230 7
MT1500SZ Turret 2, ZT1000Y, ZT1500Y Turrets 1 & 2
Boring Holder C3-*CI-MT1500-080040 C3 99 70 80 40 79 9
Boring Holder C4-*CI-MT1500-085040 C4 109 70 85 40 85 9
Boring Holder - Sub Spindle C4-*CI-MT1500-085040 SS C4 109 70 85 40 85 10
11 12
PDF Drawings of all the Coromant Capto® Toolholders featured in this catalog can be found in the Sandvik Coromant Capto® area of the Chevin Tools website
and on a CD version of the catalog available from Chevin Tools.
www.chevintools.com
Coromant Capto® Toolholding For Mori Seiki Machines
www.chevintools.com
Coromant Capto® Toolholding For Mori Seiki Machines
Presetters
Product Code SizeDimensions (mm)
l1C3-NCI-ISO50-000089 C3 89
C4-NCI-ISO40-000090 C4 90
C4-NCI-ISO50-000090 C4 90
C5-NCI-ISO50-000100 C5 100
C6-NCI-ISO50-000130 C6 130
C8-NCI-ISO50-000150 C8 147
Part Product Code SizeDimensions (mm)
Typeb2 h2 l1X l1Z l2Z l2
NL1500, NL2000 (also see table below), NL2500, NL3000, NT5400DCG
Boring Holder C4-*CI-NL2000-080075 C4 104 108 80 75 140 14
Turning Holder - Max Turn C4-*CE-NL2000-068040 C4 157 108 40 68 85 15
Turning Holder - Restricted Turn C4-*CE-NL2000-061089 C4 150 108 89 61 15
Double Turning Holder C4-*CE-NL2000-061089 DT C4 170 108 89 61 61 17
Boring Holder C5-*CI-NL3000-080075 C5 112 108 80 75 140 14
Turning Holder - Max Turn C5-*CE-NL3000-086053A C5 183 108 53 86 98 15
Turning Holder - Restricted Turn C5-*CE-NL3000-076098A C5 173 108 98 76 15
Boring Holder C6-*CI-NL3000-080085 C6 122 108 80 85 150 14
Boring Holder C8-*CI-NL3000-080119A C8 130 136 80 119 184 14
NT4200, NT4250, NT4300
Boring Holder C6-*CI-NT4200-120054 C6 162 108 120 54 119 18
Turning Holder C5-*CE-NT4200-063095 C5 160 108 95 63 19
Part Product Code SizeDimensions (mm)
Typeb1 l1X b2 l2X l1Z l2Z h2 l2
NL2000
Double Boring Holder -Main & Sub Spindles
C4-*CI-NL2000-125075 DB C4 104 80 149 125 75 82 108 16 16
13 14
Driven HoldersHaving already successfully developed Driven Holders for many leading machine manufacturers, Chevin Tools are currently developing a range of Driven Coromant Capto® Holders for Mori Seiki machines.
We can design a Driven Coromant Capto® Holder to the specification that suits your exact requirements.
For more information contact Chris Sanderson or John Telford at Chevin Tools or contact your local Sandvik representative.
E: [email protected] [email protected]
T: +44 (0) 1943 466 788
Presetter
I1
www.chevintools.com
TOOLHOLDING
WORKHOLDING
SUB-CONTRACT MACHINING
CC
CV
NM
OR
001-ENG
Collaborating with the World’s Finest
Chevin Tools Inc.
1600 Golf Road, Suite 1200, Rolling Meadows, IL 60008-4229 U.S.A.
Toll Free: 1 877 4 CHEVIN T: (847) 690 1278 F: (847) 690 1934