CoroCAM 504

Daylight UVc & Visible Channel CameraOnboard Still Imaging Recording Onto CF™ CardUV Photon CountingsLight Weight Ergonomic DesignEasy Setup and Operation High Quality Colour Viewfinder DisplayLow Noise Highly Sensitive DetectorWide Field Of View with 25x Optical Zoom

l The CoroCAM 504 can operate in daylight or at night (with artificial light).l The solar blind filter, used for daytime operation, is motorised for easy removal

to boost sensitivity during nighttime or indoor use.l Both the Visible and UVc channels can be zoomed up to 2x without parallax

error and Automatic or Manual focus.l The UV image can be shown individually or overlaid onto the visible channel.l A simple user interface allows for easy access to the menu system. l User selectable settings for image processing and corona enhancement.l Onboard image processing allows for increased sensitivity and noise reduction

without lowered frame rates associated with long exposure photography.l High quality video can be streamed to an external recorder via composite or

S-Video output.l GPS, Laser Pointers and External Remote Control can be added.l Camera software can be upgraded via Compact Flash™ card.l External recording peripherals can be interfaced via industry standard outputs.

TH

E U

LTIM

ATE D

AYLI

GH

T C

ORO

NA

IM

AG

ING

CA

MERA

Applications:

l Transmission Line Inspection l Distribution Line Inspectionl Substation Inspection l HV Electrical Component Inspection l Handheld Airborne Inspection by OEM Manufacturersl Generator and Motor Winding l High Voltage Panel Inspection

Inspections

Standard System • CoroCAM 504 DAYLIGHT UV IMAGER • CF Storage CARD

• AC MAINS ADAPTOR • OPERATING MANUAL

• 2 x Li-ION BATTERY • CABLE SET (Video and Power)

• PROTECTIVE CARRY CASE • Coro-Link™ SOFTWARE

• GPS & LASER POINTER Optional Accessories • REMOTE CONTROL

• EXTERNAL VIDEO RECORDERS

™

Data StorageStorage Media Removable Compact Flash™ CardImage Format JPEG compressed still imageVideo Storage On External RecorderAudio Audio label, wave fileStorage Capacity 1000+ images per GBFile download Via USB

External via card reader

Comms InterfacesUSB Image download from Cf™ CardRS485 Camera control via PCAuxiliary Remote control interface

RS232 general port1 Alarm output - optional1 Trigger input - optional

ProcessingImage Processing Powerful onboard digital signal

Processor for:Visible / UV image & data overlayingUV image enhancementsUV image integrationImage compression and storage

Date/Time Real-time clock with battery backupTemperature Internal camera temperatureLocation GPS (optional)Audio Modes Microphone input for audio notesPower Saving Real-time, integrate, standby, offUser Settings / Customised operating modes and control Configuration functions

User defined titles, notes and file names for storageUser configured alarm output (optional)

Software Upgrading Via Compact Flash™ Card

MechanicalWeight 2.3 kg including battery, excl. accessoriesSize 302mm L x 125mm W x 165mm HMounting Points M4 hard point, ¼” Thread tripod mount

EnvironmentalOperating Temp -15°C to 50°CStorage Temp -25°C to 60°CHumidity Up to 90%, non condensatingIP rating IP 54

Combined OutputOptical SystemVideo Output CompositeFormat PAL/NTSC AvailableOptical Channels Visible and Ultra Violet channels

Separate or overlaidFocus Type Automatic , manual overrideFocus Range 2m to InfinityWindow aperture Ø= 62 mm

Ultraviolet ChannelImage type Monochrome video

¯18 23x10 Watt/cm TypicalSensitivity (Solar Blind Mode)¯18 2Sensitivity (NightView Mode) 1x10 Watt/cm Typical

Spectrum (Solar Blind Mode) UV 240 – 280 nmUV 240 – 300 nm

Field of View 8° Horizontal x 6° VerticalZoom Factor 0.5x, 1x, 2xUpdate Rate 50 Hz maxFocus type Auto slaved to visible, manual

Visible Channel Type Colour Video, full functionSensitivity @ 60fps 2 Lux minField of View Default synchronised with UV

channelZoom Factor 25 x optical, 12x digital max

Operator InterfacesApplication Handheld or remote controlledDisplay SVGA colour micro display

viewfinderStatus Indicator LED’sAlarms Audio, LED & Aux contactsControl Inputs Onboard multi pushbutton

Remote control unitPC software controlled (option)

Audio Headphone outputMicrophone input

Power SystemPower Consumption 14 WattBattery Type Rechargeable Li-Ion

Sony Type L compatibleBattery Run Time Typical 1.5 hrs min operationBattery Location Onboard, quickly replaceableCharging On camera / optional chargerExternal Supply 9-16V 17VA - Car or mains adapterMains Adaptor 110-240VAC 50-60 Hz /

12VDC 3APower Modes Operate, chargeProtection Reverse polarity, over current,

Under voltage

Riaan Rossouw | Tel: +27 12 349 3760 | Fax: +27 12 349 5200 | Email: riaan@uvirco.comUViRCO Technologies (Pty) Ltd, Unit B003, The Woods, 41 De Haviland Rd, Persequor Park, Pretoria, 0020, South Africa

Coro

CA

M 5

04 - T

HE U

LTIM

ATE D

AYLIG

HT C

ORO

NA

IMA

GIN

G C

AM

ERA

SYSTEM SPECIFICATIONS Specifications subject to change without notice.