Cooperation with the client Indar Solutions for Steam and ... · Indar Solutions for Steam and Gas...
2
y Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy Plant · Thermal Indar Solutions for Steam and Gas Turbines An brand The technical data in this catalogue is subject to change without prior notice. PC04IPTT01_A/000/0413 NJC Indar Electric, S.L. Polígono Industrial Txara, s/n 20200 BEASAIN (Gipuzkoa) · SPAIN Tel: +34 943 02 82 00 Fax: +34 943 02 82 04 www.indar.net [email protected] World class testing facilities This allows INDAR to fully test his designs for all kind of environmental conditions and to guarantee the best quality on his products, thus developing products and services adapted to the characteristics of each project and client. For this purpose the R+D+i support unit is made up of highly qualified personnel, and counts with the most advanced computer resources for the design and development of generators. The main philosophy of INDAR is to guarantee the quality and reliability with in-house fully proven solutions. To this respect INDAR has one of the best test benches in the world. The main capabilities are: · On load tests up to 8 MW · Back to back configuration testing up to 65 MW · LVRT (low voltage ride through) testing capability · Self generated grid of 50/60 Hz 20 MVAs · Combined tests of electrical and thermal insulation ageing · Climatic chamber (-30 ºC to 80 ºC) extreme ambient conditions Cooperation with the client Cooperation forms part of the philosophy of the company, with a personalized and unique treatment being the basis of the relationship, and with a clear common purpose. This cooperation goes beyond the mere supply of our equipment and covers additional elements which complete the scope of supply as per customer requirement. An brand Consultancy Technical Support · Training Protection Cubicles Excitation Synchronisation Systems Commissioning
Transcript of Cooperation with the client Indar Solutions for Steam and ... · Indar Solutions for Steam and Gas...
Waste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Ener
Indar Solutions for Steam and Gas Turbines
An brand
Th
e te
chn
ical
dat
a in
th
is c
atal
og
ue
is s
ub
ject
to
ch
ang
e w
ith
ou
t p
rio
r n
oti
ce.
PC
04
IPT
T0
1_A
/00
0/0
413
N
JC
Indar Electric, S.L.Polígono Industrial Txara, s/n
20200 BEASAIN (Gipuzkoa) · SPAINTel: +34 943 02 82 00
Fax: +34 943 02 82 04
www.indar.net
World class testing facilitiesThis allows INDAR to fully test his designs for all kind of environmental conditions and to guarantee the best qualityon his products, thus developing products and services adapted to the characteristics of each project and client.For this purpose the R+D+i support unit is made up of highly qualified personnel, and counts with the most advancedcomputer resources for the design and development of generators. The main philosophy of INDAR is to guaranteethe quality and reliability with in-house fully proven solutions.
To this respect INDAR has one of the best test benches in the world.The main capabilities are:
· On load tests up to 8 MW· Back to back configuration testing up to 65 MW· LVRT (low voltage ride through) testing capability· Self generated grid of 50/60 Hz 20 MVAs· Combined tests of electrical and thermal insulation ageing· Climatic chamber (-30 ºC to 80 ºC) extreme ambient conditions
Cooperation with the clientCooperation forms part of the philosophy of the company, with a personalized and unique treatment being the basisof the relationship, and with a clear common purpose. This cooperation goes beyond the mere supply of our equipmentand covers additional elements which complete the scope of supply as per customer requirement.
An brand
ConsultancyTechnical Support · Training
ProtectionCubicles
ExcitationSynchronisation
Systems
Commissioning
Indar Solutions for Steam and Gas TurbinesWaste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy Plant · Thermal Solar Plant · Biomass · Combined Cycle Power Plant · Cogeneration · Waste to Energy
An brand
Solar Thermal21,500 kVA 1,800 rpm. 11,000 V
Cogeneration6,750 kVA 1,500 rpm. 11,000 V
Combined Cycle19,500 kVA 1,800 rpm. 6,600 V
Biomass30,000 kVA 1,500 rpm. 11,000 V
Waste to Energy12,510 kVA 1,500 rpm. 6,300 V
Grid Code ComplianceINDAR counts with a wide experience in supplying generators complyingwith grid code requirements. The combination of INDAR’s technologyand knowledge, together with a close cooperation with the customer, isthe only way of ensuring that the complete installation complies withthese grid code regulations.
Your one-stop shop partner in power generation
50
YEAR
30
10
2013
OUTPUT (MW)
1940
Power evolution up to 50 MWThe experience acquired during over seventy years allows us to providea wide range of products developed from our own technology offering 4poles generators up to 50 MW.
When it comes to research, INDAR has carried out an extensive policy of being at the forefront of innovation in all sectorsserved by us. As a result, state-of-the-art facilities around our main factories in Milwaukee (USA) and Beasain (SPA) allow usto offer the most reliable equipment to the specific requirements, offering the best of both worlds to serve power generationsectors where we are present today: Biomass, Thermal Solar Plant, Waste to Energy Plant, Cogeneration and Combined CyclePower Plant.
Our track record with more than 25 GW power installed is the best guarantee of our technical capabilities to adapt our electricmachines to the specific requirement. Technical expertise and the spirit of adaptability have been and remain being our mainstrength, with a sole vocation: to be your partner in power generation.
Features· Synchronous generators from 1 MW to 50 MW· 4 poles· Thermal Insulation Class: up to class H· Temperature Rise Class: F / B· Construction: Horizontal· Protection degree: up to IP56· Air and water cooled· Manufactured in different voltages up to 15,000V· Adaptability to “Close coupled gearbox” or “Stand-alone
gearbox” generator variants· International standards: IEC, NEMA, IEEE, etc
