Conventional Scaffold
3
Scaffold Tubes and Fittings Scaffold Tubes Steel Fittings Pressed right angle coupler or double coupler Pressed swivel coupler Sleeve coupler Drop - forged double / right angle coupler Drop - forged swivel coupler Drop - forged putlog (single) coupler Expanding joint pin Spigot Base plate Adjustable base plates Adjustable forkhead Tubes and fittings scaffolding are widely used for supporting man and materials, tools and tackles during construction, alteration, demolition and maintenance works because of their several advantages over conventional type of timber /bamboo scaffolding. Items for tubes and fittings scaffolding manufactured by MAINI Construction Equipments (P) Ltd. include a complete range of components which are strong, safe, durable and economical. These items are ideally suited for wide application in construction, maintenance, alteration and demolition of structures. These items are as follows: Highlights Ease and speed in erection and dismantling. Scopes for multiple and varied re-use (Life and flexibility in use). Rigidity and stability during erection. Ease in storing and maintenance. Reliable assessment of performance with adequate scopes for safety. Eco Friendly. I SCAFFOLD TUBES Back Steel Scaffold Tubes, black, 48.3 mm O.D., mild steel, continous weld and 40 mm. N. B. 'Medium' and 'Heavy' class steel tubes conform to IS 1161-1979/1239, YST- 210, YST-240 grade and BS 1139/1775. These are made available in random lengths of 4.5 M to 6M or of required cut length painted in desired colour. II STEEL FITTINGS Back All scaffolding fittings manufactured by MAINI Construction Equipments (P) Ltd. strictly conform to the guidelines of IS 2750-1968 (Reaffirmed-1991) & BS- 1139-1964. A. PRESSED RIGHT ANGLE COUPLER OR DOUBLE COUPLER Back This type of coupler is used for connecting scaffold tubes at right angle to each other. Right angled couplers are available for 40 X 40 mm N. B. Pipes and 40 X 50 mm. N.B pipes. B. PRESSED SWIVEL COUPLER Back This type of coupler is used for connecting two tubes at any angle other than right angle. Swivel couplers are available for 40 X 50 mm. N.B pipes and 40 X 50 mm. N. B. pipes. Page 1 of 3 7/16/2012 http://www.mcepl.com/scaffold.htm
-
Upload
calvin-wang -
Category
Documents
-
view
39 -
download
0
Transcript of Conventional Scaffold
Scaffold Tubes and Fittings
Scaffold Tubes
Steel Fittings
Pressed right angle coupler or double coupler
Pressed swivel coupler
Sleeve coupler
Drop-forged double / right angle coupler
Drop-forged swivel coupler
Drop-forged putlog (single) coupler
Expanding joint pin
Spigot
Base plate
Adjustable base plates
Adjustable forkhead
Tubes and fittings scaffolding are widely used for supporting man and materials, tools and tackles during construction, alteration, demolition and maintenance works because of their several advantages over conventional type of timber /bamboo scaffolding.
Items for tubes and fittings scaffolding manufactured by MAINI Construction Equipments (P) Ltd. include a complete range of components which are strong, safe, durable and economical. These items are ideally suited for wide application in construction, maintenance, alteration and demolition of structures. These items are as follows:
Highlights
Ease and speed in erection and dismantling.Scopes for multiple and varied re-use (Life and flexibility in use).Rigidity and stability during erection.Ease in storing and maintenance.Reliable assessment of performance with adequate scopes for safety. Eco Friendly.
I SCAFFOLD TUBES BackSteel Scaffold Tubes, black, 48.3 mm O.D., mild steel, continous weld and 40 mm. N. B. 'Medium' and 'Heavy' class steel tubes conform to IS 1161-1979/1239, YST-210, YST-240 grade and BS 1139/1775. These are made available in random lengths of 4.5 M to 6M or of required cut length painted in desired colour.
II STEEL FITTINGS Back
All scaffolding fittings manufactured by MAINI Construction Equipments (P) Ltd. strictly conform to the guidelines of IS 2750-1968 (Reaffirmed-1991) & BS-
1139-1964.
A. PRESSED RIGHT ANGLE COUPLER OR DOUBLE COUPLER Back
This type of coupler is used for connecting scaffold tubes at right angle to each other. Right angled couplers are available for 40 X 40 mm N. B. Pipes and 40 X 50 mm.
N.B pipes.
B. PRESSED SWIVEL COUPLER Back
This type of coupler is used for connecting two tubes at any angle other than right angle. Swivel couplers are available for 40 X 50 mm. N.B pipes and 40 X 50 mm. N. B. pipes.
Page 1 of 3
7/16/2012http://www.mcepl.com/scaffold.htm
C. SLEEVE COUPLER Back
This type of coupler is used for axial connection of two scaffolding tubes that are subjected to bending or axial tension. Sleeve couplers manufactured by MAINI Construction Equipments (P) Ltd. Are having smooth inside surface and firm bolts to provide adequate external
grip to be connected tubes like a sleeve.
D. DROP-FORGED DOUBLE / RIGHT ANGLE COUPLER Back
This is a complete load bearing coupler made from drop forged body & cap incorporating captive 'T' bolts to be
tightened for joining two scaffold tubes at right angle.
E. DROP-FORGED SWIVEL COUPLER Back
A one-piece complete load bearing coupler of rugged design to be tightened with 'T' Bolts for adjoining two
scaffold tubes at any angle for diagonal bracing.
F. DROP-FORGED PUTLOG (SINGLE) COUPLER Back
This is a special coupler made from drop forged cap
designed to complement the double coupler.
G. EXPANDING JOINT PIN Back
Expanding joint pin is an internal fitting made out of 32 N. B. diametrically cut (longitufinally split) pipes for joining two tubes end to end, which are subjected to bending
and exial compression only.
H. SPIGOT Back
This item is an alternative for expanding joint pin made out of square tube with nut and bolt arrangement for
proper fixing.
I. BASE PLATE BackFixed Base plates manufactured by MCE (P) L are made out of plate 150 X 150 X 6 mm. With spigots / pins for fixing with 40 N. B. scaffold tubes. Passing through a strict quality control procedures these plates have plain
surface to transfers load to ground uniformly.
J. ADJUSTABLE BASE PLATES Back
Made out of plate 150 X 150 X 6 mm and screwed jacks of dia 32 mm or 34 mm or 36 mm or 38 mm with adjustment of 225 mm or 350 mm or 450 mm or 550 mm. These Base plates give stability to scaffolding with
desired adjustment at the base
K. ADJUSTABLE FORKHEAD Back
Page 2 of 3
7/16/2012http://www.mcepl.com/scaffold.htm
|| Home | About Us | Products | Feedback | Contact us ||
3.4 Milestone, Sohna Road, Village Gonchi, Ballabgarh (Faridabad)- Haryana - India Mobile : 0091-9810018150 Tel : 0091-(0)129-2440965,2440966 Fax : 0091-(0)129-2440909
email: [email protected], [email protected]
Copyright MCE, MAINI Construction Equipments (P) Ltd., INDIA All rights reserved throughout the World
Website Designed & Maintained by Kaizen Corporation
"Available in hollow & solid design with various adjustments from 75 mm to 660 mm with malleadble / cast iron nuts with forkhead. To accept steel or timber runners at top of scaffold verticals. All duly electro
plated / painted finish.
Page 3 of 3
7/16/2012http://www.mcepl.com/scaffold.htm
