Controls Lecture1 S12
-
Upload
muneeb-hassan -
Category
Documents
-
view
109 -
download
0
Transcript of Controls Lecture1 S12
1
MTS-362CONTROL ENGINEERING
Spring 2012Lecture No. 1
Department of Mechatronics Engineering
“INTRODUCTION TO FEEDBACK CONTROL SYSTEMS”
Instructor: Engr. Sadaf Siddiq
Class: BEMTS 6A & 6B
2
Course Information
Course Title: Control Engineering (MTS-362)Credit hrs: 04
Lab: Compulsory
Prerequisites For this Course: Modeling & Simulation of Dynamic Systems
This Course is Prerequisite For: Advanced Controls & Simulation Techniques
Instructor: Engr. Sadaf Siddiq
e-mail : sadaf@ mail.au.edu.pk Office: Academic Block B
Web: http://www.au.edu.pk Office hours: Thu & Fri : 3PM – 4PM
Text Book: Charles Phillips & Royce Harbor, “Feed Back Control Systems”, Prentice-Hall, 4th Edition, 2000
Reference Book(s): 1- Katsuhiko Ogata, “Modern Control Engineering”, Prentice-Hall, 4th Edition, 2002. 2- Farid Golnagahi, Benjamin C. Kuo, “Automatic Control Systems” John Wiley & Sons, Inc.,9th Edition, 2009.
3
Learning Evaluation
Grading Policy● Quizzes 10%●Assignments 05%●Mid-Term Exam 20%●Lab 20%● Final Exam 45%
4
Lecture Plan:
Week Topic
1Basics of control system, open-loop and closed-loop control systems, block diagram terminology and some example of systems
2 Review of mathematical modeling of dynamic Systems
3 Review of Mathematical modeling of mixed Systems
4Revision of some basics of Laplace Transforms, Conversion form electrical to mechanical and mechanical to electrical equivalent systems
5 Block diagram algebra, Signal flow graph, Mason’s Gain formula.
6State variable and its modelling, simulation diagrams, state space equation. Linearization.
7Digital control systems. System responses for unit step, ramp and sinusoidal input for 1st order and 2nd order systems.
8Time response of the 1st order, 2nd order and the higher order systems.
9 Midterm Exam
5
Lecture Plan:
Week Topic
10Frequency response of the first and 2nd order systems
11Study the control system characteristics, stability, disturbance, disturbance rejection, steady state accuracy
12 Ruth-Hurwitz stability criteria, and its applications.
13Root locus analysis and design, root locus principles.
14Root locus problem solving and its application to lead and lag compensators.
15 PID design, PI controllers, and its applications.
16 PID controllers, and their applications.
6
Mechatronics
Industrial Automation
Sensors and Transducers
Electromechanical Systems
Micro Electro Mechanical Systems (MEMS)
Nano Electro Mechanical Systems (NEMS) : Nano Technology
Robotics
Feedback Controls - Pre Requisite (Required) For Subjects
7
Controls
Mechanics
Sensors
Electronics
Software
8
9
10
Concept of a System
11
Terminology
12
Open Loop Systems
• Ceiling Fans• Room Heaters• Pumps without level Control
13
Open Loop System-Example
14
Closed Loop Systems
• Air Conditioners• Water Geysers• Pumps with level control • Toasters• Pressing Iron
15
Closed Loop System-Example
16
Feedback Control Systems emerged rather recently
● 1600 Drebbel Temperature regulator● 1681 Pressure regulator for steam boilers ● 1765 Polzunov water level float regulator● 1769 James Watt’s Steam Engine and Governor● 1868 James Clerk Maxwell formulates a mathematical model for governor control of a steam engine● 1927 Harold Black discovers and patents the feedback amplifier● 1927 Hendrik Bode analyzes feedback amplifiers● 1932 Nyquist develops methods for analyzing feedback amplifier stability● 1940s Norbert Wiener leads gun positioning effort; feedback control engineering becomes an engineering discipline● 1950s Increased use of Laplace transform, s-plane, root locus● 1960s Sputnik, highly accurate control systems for space vehicles,● robotics, and missiles ● 1980s Routine use of digital computers as control elements● 1990s Feedback control in automobiles, automation, planetary exploration
17
Closed loop example: Polzunov’s Water level float regulator
18
Closed loop example: James Watt’s flyball governor
19
Example: Feedback in everyday life
20
RoboticsA robot is a programmable computer integrated with a machine
21
Example: Disk Drive
22
Example: Automatic Parking Control
23
Feedback Control: Benefits and cost
Benefits:
Cost:
24
Feedback Control: Benefits and cost
Benefits:
Cost:
• Reduction of sensitivity to process parameters• Disturbance rejection• More precise control of process at lower cost• Performance and robustness not otherwise achievable
25
Feedback Control: Benefits and cost
Benefits:
Cost: • More mathematical sophistication• Large loop gain to provide substantial closed loop gain• Stabilizing closed loop system• Achieving proper transient and steady-state response
• Reduction of sensitivity to process parameters• Disturbance rejection• More precise control of process at lower cost• Performance and robustness not otherwise achievable
26
Multivariable Control System