Control Valves - klinger.pt · Control Valves . Series 4000 . Cryogenic Control Valves. 1/2 . Size...
3
Control Valves Series 4000 Cryogenic Control Valves 1/2 Size (DN) DN 10 — 40 Pressure rating PN16 (DN32/40); PN16/40 (DN10/25) Connections Welded BW Type sealing Soft (Class VI) Metallic (Class IV - V) Characteristic Linear, Equalpercentage (eqp%) Acon Pneumac with diaphragm (supply max 3 bar) Temperature from -196 to +100 ̊C Options Control valves Series 4000 are designed for super vacuum insulated cryogenic plants and can also be used in pilot and experimental plants. Their body is built from stainless steel bars and is therefore completely configurable according to the type of application. All internal parts are completely removable without removing valve body from the pipe line, so all maintenance operations are made more easily. All Burocco valves are delivered after testing and calibration and ready for a long utilize, without maintenance. Full stainless steel actuator for corrosive environment Handwheel for emergency operation Valve positioners and Position feedback Stroke limiter and limit switches Airset Electric linear actuators (230 V AC, 110/115 V AC, 24 V AC/DC) Hand operating (manual) Pneumatic with piston actuator (serivice ON/OFF) Body and extension special cleaning for Oxiges services Special project design on request Description Technical data Materials Valve body S.S. 316L (1.4404/4401) Trim (plug - seat) S.S. 316L (1.4404/4401) Steam S.S. 316L (1.4404/4401) Packing Metallic bellows 316L double wall PN16 Metallic bellows 316L triple wall PN40 Acuator Fe (epoxy varnish) Stainless steel Yoke Stainless steel Pipe Line Vacuum
Transcript of Control Valves - klinger.pt · Control Valves . Series 4000 . Cryogenic Control Valves. 1/2 . Size...
Control Valves Series 4000 Cryogenic Control Valves
1/2
Size (DN) DN 10 — 40 Pressure rating PN16 (DN32/40); PN16/40 (DN10/25) Connections Welded BW Type sealing Soft (Class VI)
Metallic (Class IV - V) Characteristic Linear, Equalpercentage (eqp%) Action Pneumatic with diaphragm
(supply max 3 bar) Temperature from -196 to +100 ̊C
Options
Control valves Series 4000 are designed for super vacuum insulated cryogenic plants and can also be used in pilot and experimental plants. Their body is built from stainless steel bars and is therefore completely configurable according to the type of application. All internal parts are completely removable without removing valve body from the pipe line, so all maintenance operations are made more easily. All Burocco valves are delivered after testing and calibration and ready for a long utilize, without maintenance.
Full stainless steel actuator for corrosive environment
Handwheel for emergency operation
Valve positioners and Position feedback
Stroke limiter and limit switches
Airset
Electric linear actuators (230 V AC, 110/115 V AC, 24 VAC/DC)
Hand operating (manual)
Pneumatic with piston actuator (serivice ON/OFF)
Body and extension special cleaning for Oxiges services
Special project design on request
Description
Technical data
Materials
Valve body S.S. 316L (1.4404/4401)
Trim (plug - seat) S.S. 316L (1.4404/4401)
Steam S.S. 316L (1.4404/4401)
Packing Metallic bellows 316L double wall PN16
Metallic bellows 316L triple wall PN40
Acuator Fe (epoxy varnish)
Stainless steel
Yoke Stainless steel
Pipe Line
Vacuum
Control Valves Series 4000 Cryogenic Control Valves
2/2
Size (mm) - (valve body with connections BW)
Size BW
Øest. x sp. A B H L T
Body Size
DN10 13 x 1,5 80 285 330 615 Ø205 Ø44,5
DN15 18 x 1,5 95 290 330 620 Ø205 Ø65
DN20 23 x 1,5 120 300 330 630 Ø205 Ø80
DN25 28 x 1,5 140 300 330 630 Ø205 Ø80
DN32 36 x 2 150 300 330 630 Ø275 Ø95
DN40 44 x 2 150 300 330 630 Ø275 Ø95
Control characteristic
Flow rate coefficient (CV)
DN ¼” (10) ½”(15) ¾”(20) 1” (25) 1½” (40)
CV
- - - - -
- - - - 28
- - - - 18
- - - 12 12
- - 7 7 7
- 4 4 4 4
2,5 2,5 2,5 2,5 2,5
2 2 2 2 2
1,5 1,5 1,5 1,5 1,5
1 1 1 1
0,8 0,8 0,8 0,8
0,5 0,5 0,5 0,5
0,3 0,3 0,3 0,3
0,2 0,2 0,2 0,2
0,1 0,1 0,1 0,1
0,08 0,08 0,08 0,08
0,06 0,06 0,06 0,06
0,05 0,05 0,05 0,05
0,03 0,03 0,03 0,03
0,02 0,02 0,02 0,02
0,01 0,01 0,01 0,01
DOSAPACK® PD
Non-contractual document. Dimensions and technical data subject to change without prior notice.
The
info
rmat
ion
cont
aine
d in
this
doc
umen
t is
the
prop
erty
of S
DM
-Sis
tem
as fo
r whi
ch n
o lia
bilit
y will
be
impl
ied.
APPLICATIONSThe DOSAPACK PD equipment can be used for dosing any reactive liquid:
Reagents used in water treatment
Coagulants
pH reducers
Conditioning reagents
Other types of reagents for industrial applications
Reagents for treatment of water in boilers
Reagents for treatment of cooling towers
Correct dosing ensures accuracy in the quantities added of reagents, thus optimising the use of the same.
Dispensation of reagents in the plant is a very important process with influence on the correct operation of the same.
A pre-installed dosing system provides:
Necessary elements to ensure correct operationof the dosing pumps.
Adequate disposition and assembly of theelements in accordance with the required serviceconditions.
Easy launch of the reagent dosing at the plant.
Protection of the dosing pumps and componentsfrom adverse weather conditions.
THE CORRECT DOSING OF REACTIVES REQUIRES A DISPENSING SYSTEM
trusted. worldwide. 00|00
Klinger Portugal, Lda.Via José Régio, 36
Centro Empresarial Vilar do Pinheiro4485-860 Vila do Conde
T: +351 22 947 0910E-mail: [email protected]
www.klinger.ptversão Q3 2019
Delegação LisboaRua de Cabo Verde, 8 Prior Velho 2685-316T: +351 21 940 6620
E-mail: [email protected]
Klinger Portugal, Lda.Via José Régio, 36
Centro Empresarial Vilar do Pinheiro4485-860 Vila do Conde
T: +351 22 947 0910E-mail: [email protected]
Delegação LisboaRua de Cabo Verde, 8 Prior Velho 2685-316T: +351 21 940 6620
E-mail: [email protected]
