CONTROL> Series PDV solenoid valves Release 8.8 Series...

Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.

2

Series PDV solenoid valvesCONTROL > CATALOGUE > Release 8.8

/1.19.012

CO

NTR

OL

Series PDV directly operated solenoid valves with separating diaphragm2/2-way - Normally Closed (NC)

Series PDV directly operated solenoid valve is available with several nominal diameters and in three different versions according to the electrical connection. Moreover, the separating diaphragm protects the medium from extreme changes of temperature due to heating of the solenoid.

To choose the most suitable model for a specific application, check the chemical compatibility of the medium to control with the available materials of body and seals.

» Suitable to be used with neutral or aggressive fluids

» Suitable for specific applications on medical and analytical equipment or instruments

» Compact design

GENERAL DATA

TECHNICAL FEATURESFunction Operation Pneumatic connections Nominal diameter Nominal flow Flow coefficient kv (l/min) Operating pressure Operating temperature Media Response time (ISO 12238) Installation

2/2 NC directly operated with separating diaphragm on subbase by means of M3 screws 0.8 … 2 mm see kv 0.25 ... 0.8 0 ... 7 bar 10°C ÷ 50°C gas and liquids: air, water, reagents, solvents, etc... ≤ 15 ms in any position

MATERIALS IN CONTACT WITH THE MEDIUMBody Seals

PEEK FKM - EPDM

ELECTRICAL FEATURESVoltage Voltage tolerance Power consumption Duty cycle Electrical connection Protection class

24 V DC - 12 V DC - other voltages on request ±10% 2 W ED 100% industrial standard (9.4 mm), DIN EN 175 301-803-C (8 mm), cable L = 300 mm IP65 with connector

Special versions available on request

New versions


Series PDV solenoid valvesCATALOGUE

2

/1.19.022

> Release 8.8 CONTROL >

CO

NTR

OL

CODING EXAMPLE

PDV SERIESC0 BODY DESIGN: C0 = body with interface for subbase1 NUMBER OF WAYS - FUNCTIONS: 1 = 2/2-way NC22 PNEUMATIC CONNECTIONS: 22 = PDV-type interface, 2-wayB7 NOMINAL DIAMETER: A7 = ø 0.8 mm

B3 = ø 1.2 mm B7 = ø 1.6 mm C1 = ø 2.0 mm

3 SEAL MATERIAL: 3 = FKM 4 = EPDM

G BODY MATERIAL: G = PEEKN MANUAL OVERRIDE: N = not foreseenM FIXING ACCESSORIES: M = screws for metal00 OPTIONS: 00 = none4A ELECTRICAL CONNECTION: 3A = DIN EN 175 301-803-C (8 mm)

4A = industrial standard (9.4 mm) 7A = cables (L = 300 mm)

3C = DIN EN 175 301-803-C (8 mm) with coil rotated 180° 4C = industrial standard (9.4 mm) with coil rotated 180° 7C = cables (L = 300 mm) with coil rotated 180°

C023 VOLTAGE - POWER CONSUMPTION: C017 = 6V DC 2W C020 = 12V DC 2W C023 = 24V DC 2W

PDV C0 1 22 - B7 3 G N - M 00 4A C023

2/2 NC solenoid valve, industrial standard (9.4 mm)

Supplied with: 1x seal 2x M3x8 UNI 5931 screws NOTE IN THE TABLE BELOW: * to complete the code, add ELECTRICAL CONNECTION (4A or 4C options) and VOLTAGE (see CODING EXAMPLE)

Mod. Orifice Ø (mm) kv (l/min) Min/max pressure (bar) Max back pressure (bar) Body material Seal materialPDVC0122-A73GN-M00* 0.8 0.25 0 ÷ 7.0 1.2 PEEK FKMPDVC0122-A74GN-M00* 0.8 0.25 0 ÷ 7.0 1.2 PEEK EPDMPDVC0122-B33GN-M00* 1.2 0.55 0 ÷ 4.5 1.2 PEEK FKMPDVC0122-B34GN-M00* 1.2 0.55 0 ÷ 4.5 1.2 PEEK EPDMPDVC0122-B73GN-M00* 1.6 0.65 0 ÷ 4.0 1.2 PEEK FKMPDVC0122-B74GN-M00* 1.6 0.65 0 ÷ 4.0 1.2 PEEK EPDMPDVC0122-C13GN-M00* 2.0 0.80 0 ÷ 3.0 1.2 PEEK FKMPDVC0122-C14GN-M00* 2.0 0.80 0 ÷ 3.0 1.2 PEEK EPDM

NOTE IN THE DRAWING: 1 = INLET PORT 2 = OUTLET PORT


2


/1.19.032

CO

NTR

OL

2/2 NC solenoid valve, DIN EN 175 301-803-C (8 mm)




2/2 NC solenoid valve, electrical connection with 300mm cable





Series PDV solenoid valvesCATALOGUE

2

/1.19.042

> Release 8.8 CONTROL >

CO

NTR

OL

Industrial standard (9.4 mm) connector Mod. 125-...

Mod. description colour working voltage cable holding tightening torque125-601 connector, diode + Led transparent 10/50 V DC PG7 0.3 Nm125-701 connector, varistor + Led transparent 24 V AC/DC PG7 0.3 Nm125-800 connector, without electronics black - PG7 0.3 Nm

1 = 90° adjustable connector

Industrial standard (9.4 mm) connector Mod. 125-... with cable

Mod. description colour working voltage

cable length [ L ]

cable holding

tightening torque

125-501-2 moulded cable with diode + Led

black 10/50 V DC 2000 mm - 0.3 Nm

125-550-1 moulded cable, without electronics

black - 1000 mm - 0.3 Nm

125-601-2 pre-wired cable, diode + Led

transparent 10/50 V DC 2000 mm PG7 0.3 Nm

125-571-3 moulded cable, varistor + Led

black 24 V AC/DC 3000 mm - 0.3 Nm

125-900 pre-wired cable with voltage rectifier

black 6 V - 110 V AC/DC

2000 mm PG7 0.3 Nm

The internal rectifier circuit of the connector Mod. 125-900 allows to use solenoid valves with different AC voltage, even if the voltage indicated on the solenoid valve is DC.

1 = 90° adjustable connector

Connector Mod. 126-... DIN EN 175 301-803-C (8 mm)


cable length [ L ]

cable holding

tightening torque

126-550-1 moulded cable, without electronics

black - 1000 mm - 0.3 Nm

126-800 connector, without electronics

black - - PG7 0.3 Nm

126-701 connector, varistor + Led

transparent 24 V AC/DC

- PG7 0.3 Nm 1 = 90° adjustable connector


2


/1.19.052

CO

NTR

OL

Industrial standard (9.4 mm) in-line connectors with cable


cable length [ L ]

cable holding

tightening torque

125-503-2 in-line moulded cable, with diode + Led

black 24 V DC 2000 mm - 0.3 Nm

125-503-5 in-line moulded cable, with diode + Led

black 24 V DC 5000 mm - 0.3 Nm

125-553-2 in-line moulded cable, without electronics

black - 2000 mm - 0.3 Nm

125-553-5 in-line moulded cable, without electronics

black - 5000 mm - 0.3 Nm

Industrial standard (9.4 mm) in-line connectors with bridge rectifier


cable length [ L ]

cable holding

tightening torque

125-903-2 in-line moulded cable with voltage rectifier


2000 mm - 0.3 Nm

125-903-5 in-line moulded cable with voltage rectifier


5000 mm - 0.3 Nm

CONTROL> Series PDV solenoid valves Release 8.8 Series...

Documents

Transcript of CONTROL> Series PDV solenoid valves Release 8.8 Series...