CONTROL DE TEMPERATURA CARACTERISTICAS: …
Transcript of CONTROL DE TEMPERATURA CARACTERISTICAS: …
PRODUCTO INDÚ 2018
TC544A
CARACTERISTICAS: 48 x 48 mm Pantalla Doble, Punto de ajuste doble Entrada TC/RTD Salida de Control: Relé o SSR Salida auxiliar: Relé Temporizador de permanencia, PID Calor/Frío.PANTALLA: Doble LED de 7 segmentos, 4+4 dígitosTIPO DE ENTRADA: Termopar (J, K, T, R, S) / RTD (Pt100)PRESICIÓN: Para entradas TC (J, K, T)SALIDA CONTROL: Relé: 5A resistivo SSR (seleccionable en campo): 12V CD, 50mASALIDA RESIDUAL: Relé: 5A resistivo SSR opcional: 12V CD, 50mAFUNC. ESPECIALES: PID calor / Frio Temporizador de permanenciaVOLTAJE ALIMENT: 85 a 270V CA/CD
TC244AX-CU
CARACTERISTICAS: 72 x 72 mm Pantalla Doble, Punto de ajuste doble Entrada TC/RTD Salida de Control: Relé o SSR Salida auxiliar: Relé Temporizador de permanencia, PID Calor/Frío.PANTALLA: Doble LED de 7 segmentos, 4+4 dígitosTIPO DE ENTRADA: Termopar (J, K, T, R, S) / RTD (Pt100)PRESICIÓN: Para entradas TC (J, K, T)SALIDA CONTROL: Relé: 5A resistivo SSR (seleccionable en campo): 12V CD, 50mASALIDA RESIDUAL: Relé: 5A resistivo SSR opcional: 12V CD, 50mAFUNC. ESPECIALES: PID calor / Frio Temporizador de permanenciaVOLTAJE ALIMENT: 85 a 270V CA/CD
TC344AX-CE
CARACTERISTICAS: 96 x 96 mm Pantalla Doble, Punto de ajuste doble Entrada TC/RTD Salida de Control: Relé o SSR Salida auxiliar: Relé Temporizador de permanencia, PID Calor/Frío.PANTALLA: Doble LED de 7 segmentos, 4+4 dígitosTIPO DE ENTRADA: Termopar (J, K, T, R, S) / RTD (Pt100)PRESICIÓN: Para entradas TC (J, K, T)SALIDA CONTROL: Relé: 5A resistivo SSR (seleccionable en campo): 12V CD, 50mASALIDA RESIDUAL: Relé: 5A resistivo SSR opcional: 12V CD, 50mAFUNC. ESPECIALES: PID calor / Frio Temporizador de permanenciaVOLTAJE ALIMENT: 85 a 270V CA/CD
CONTROL DE TEMPERATURA
SELEC 1
TC544A / TC244AX / TC344AX
Display Specifications
Digits 4+4 Digits, 7 Segment LED Dual Display
LED Indication 1. Output 1 ON T : Auto tune 2. Output 2 ON S : Dwell timer
Input Specifications
Inputs Thermocouple (J, K, T, R, S) / RTD (PT100)o Resolution 0.1 / 1 for TC / RTD inputs
o (fixed 1 for R & S type TC input) o Indication Accuracy For J, K & T inputs : 0.25% of F.S. ±1
oFor R & S inputs : 0.5% of F.S. ±2 (20 min of warm up time for TC inputs)
o For RTD input : 0.1% of F.S. ±1
(F.S. = Full Scale) o o Temperature Unit C / F selectable
Input Filter (FTC) 0.2 to 10.0 sec
Sampling time 250 ms
Output Specifications
Control Output (Relay or SSR user selectable)
Relay contact (SPDT) 5A resistive @ 250V AC / 30V DC (TC544A) : SPST RLY)
SSR drive (Voltage Pulse) 12V DC, 50 mA
Auxiliary Output
Relay Contact (SPDT) 5A resistive @ 250V AC / 30V DC (TC544A) : SPST RLY)
SSR drive (Voltage Pulse) 12V DC, 50 mA
Functional Specifications
Control Action 1) PID Control with auto tuning. 2) ON - OFF Control oProportional Band (P) 1.0 to 400.0
Integral Time (I) 0 to 9999 sec
Derivative Time (D) 0 to 9999 sec
Cycle Time 0.1 to 99.9 sec oHysteresis Width 0.1 to 99.9
o Manual Reset Value -19.9 to 19.9 Heat-cool Control Action PID
o Proportional Band - Cool 0.0 to 400.0 Cycle Time-Cool 0.1 to 99.9 sec
Dead Band Programmable from setpoint low limit to setpoint high limit.
Settings for Alarm Output Modes Deviation, Absolute
o Hysteresis 0.1 to 99.9
Environmental Specifications
oTemperature Operating : 0 to 50 C oStorage : -20 to 75 C
Humidity (non - condensing) 95% RH
Weight TC544 : 142 gms TC244 : 200 gms TC344 : 252 gms
Auxiliary Supply Specifications
Supply Voltage 90 to 270V AC / DC (50 / 60Hz) OPTIONAL - 24V AC / DC, ±10%
Power Consumption 6 VA max @ 230V AC
Features :! 4+4 Digits, 7 Segment LED Dual Display
! TC / RTD Input
! ON - OFF / PID Control
! Two Set Points
!o o C / F Selectable
! Field selectable Control Output (Relay or SSR)
! Auxiliary Output : Relay / SSR
Certifications : C US
®
1www.selec.com
Temperature Controllers
48 x 48 mm 72 x 72 mm 96 x 96mm
Dimensions
Panel Cutout
F
G
B
A C
D
E
TC544A / TC244AX / TC344AX
A
52
72
96
MODELS
TC544A
TC344AX
TC244AX
B
52
72
96
C
94
83.7
73
D
45
67
90.5
E
4
4.5
5
F
46
69
92
G
46
69
92
DIM
All dimensions are in mm
2www.selec.com
Temperature Controllers
Terminal Connections
2Cable Size (mm ) : 1.5-2.5 ; Stud Hole for Lug (mm) : 3.5 ; Tightening Torque (N-m) : 0.8
Cable Size (AWG) : 16-13 ; Stud Hole for Lug (inch) : 0.137 ; Tightening Torque (Lb-inch) : 7
L (+)
N (-)
1
2
5
4
6
7
8
9
10
11
12
13
14
15
16
17
18
TC+/RTD1
TC-/RTD2
RTD33
NO2
SS
R1+
-
NO1
COM2
NC2
COM1
NC1
TC344AXTC244AXTC544A
L (+)
N (-)
NO2
1
2
3
4
5
6
7
COM2
8
9
10
11
12
13
14
TC+/RTD1
TC-/RTD2
RTD3
SS
R
+
-
NC2
NO1
COM1 NC1
7
8
9
10
COM2
COM1
NO2
2
1
3
4
5
L (+) 6
N ( )
NO1
-
TC+/RTD1
TC /RTD2
RTD3
12
11
SSR1-
SSR1+
SSR
2
+
-
SSR
2
SSR
2
+
+
- -
Compliance
Applicable EMI / EMC Standards
Product Standard : IEC 61326-1
Category Standards Compliance
ESD Immunity Level III
Surge Immunity+/- 2 kV common mode, +/- 1 kV differential mode
Radiated SusceptibilityLevel III, 80 to 1000MHz Level II, 1.4GHz to 2GHz Level I, 2GHz to 2.7GHz
Conducted Susceptibility Level II
IEC 61000-4-2
IEC 61000-4-5
IEC 61000-4-3
IEC 61000-4-6
Voltage Dips andInterruptions
Dips : 0% residual voltage / 1 cycle (Criteria B), 40% residual voltage / 10 cycles 50Hz / 12 cycles 60Hz (Criteria C)70% residual voltage / 25 cycles50Hz / 30 cycles 60Hz (Criteria C) Interruptions : 0% residual voltage /250 cycles 50Hz / 300 cycles 60Hz(Criteria C)
IEC 61000-4-11
Level III
Conducted Emission
Radiated Emission
Electrical Fast Transient
CISPR-11
CISPR-11
IEC 61000-4-4
Ordering Information
Input Sensor Ranges (For TC / RTD Inputs)
Ranges
PT100-150 to 850 -150 to 850oC
oF
1 0.1
K
T
R & S
-199 to 400 -199 to 400
J-199 to 750 -199 to 750
oC
oC
oC
oC
oF
oF
oF
oF
-238 to 1562 -199 to 999
-328 to 1382 -199 to 999
-199 to 1350 -199 to 999
-328 to 2462 -199 to 999
-328 to 750 -199 to 750
0 to 1750 N/A
N/A32 to 3182
Resolution
Sensor type
For TC544 : 48 X 48 Collar clamp ACL4802
For TC244/TC344 : Clamp side with screw assembled
Mounting Accessories (Supplied with units)
Accessories (Optional)
Adapter plate
1) AP7248 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48) Instrument into existing (72 x 72) cutout size.
2) AP9648 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48) Instrument into existing (96 x 96) cutout size.
3) AP9672 : Plastic adapter plate, used to mount 72 x 72mm size instrument into existing (96 x 96) cutout size.
4) AP4896-4848-G-C : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48) Instrument into existing (48 x 96) cutout size.
Standard SELEC accessories that can be used with this product.
C US
®
TC544A --
--
--
--
--
--
--
--
TC544A-24V
TC244AX
TC544A-CU
OUTPUT 2
SSR (12V DC)RELAY
SUPPLY VOLTAGE
24V DC90-270V AC / DC
OUTPUT 1
SSR (12V DC)
CERTIFICATIONPRODUCT CODE
TC344AX -- --
RELAY