Control box-idec -

Control StationsKGNW/AGAW/AGA/KGN/FB/ABS

Ha Noi O�ce:No. 95 - TT4, My Dinh Urban Area, My Dinh, Nam Tu Liem, Hanoi.Tel: (84 4) 3568 3740Fax: (84 4) 3568 3741

Cambodia O�ce:#140, Room 1-B, St430, Sangkat Toul Tompuong II, Khan Chamkamon, PP.Tel: 855 2322 3635Fax: 855 2322 3645

Head O�ce:No 88, Vinh Phu 40, Hoa Long,Vinh Phu, Thuan An, Binh Duong.Tel: (84 650) 37 37 619Fax: (84 650) 37 37 620

1800 6547THINK TOGETHER

Nhà phân phối thiết bị điện công nghiệphàng đầu Việt Nam

T

2

Control Stations (Selection Guide)

Model KGNW AGAW

Note: The degree of protection for AGAW, AGA, and AGS depends on the switches or pilot lights to be mounted.

Mounted Switches & Pilot Lights

Degree of Protection

PushbuttonPilot lightIlluminated pushbuttonSelector switchSelector pushbutton Mono-lever switchAC cam switchAZ electromagnetic buzzerAM ammeter

IP65(IEC 60529)

Key switchKey reset switchKey cam switchKey selector switch

IP54(IEC 60529)

Square pushbutton Square pilot lightUC cam switch(Part No. starting with U)

IP40(IEC 60529)

For AGA series deep enclosures, 1 or 2 holes: HNA22 G3/4 (22 mm) × 13 to 5 holes: HNA33 G1 (28 mm) × 1

Columns Single Column Single Column

Shape

Degree of Protection IP40 (IEC 60529) IP65 (IEC 60529) (Note)

Material (Box) Carbon steel plate Aluminum alloy die-cast

Coating Color 5Y7/1 semi-gloss, melamine coating 5Y7/1 semi-gloss, melamine coating (outside only)

Standard Operating Conditions

Ambient temperature: –25 to +50°C (no freezing)Relative humidity: 45 to 85% (no condensation)

Style Wall mount (1 to 5 holes) Wall mount (1 to 5 holes) Pole mount (1 to 4 holes)

Cable Lead-in (Wall Mount)

Double knockoutsOn top: ø22 and ø27 mmOn bottom: ø16 and ø20 mm

Entrance hub(Gland hubs are also available)1 to 3 holes: HNA22 G3/4 (22 mm) × 14 to 5 holes: HNA33 G1 (28 mm) × 1

Applicable Switches/Pilot Lights

IDEC ø22 mm TW/HW series

Enclosure Size 100, 150, 200, 250, 300H × 80W × 76D mm 150, 200, 300H × 86W × 82D mm

Page 5 8

Model AGA KGN

Columns Single Column Multiple Column Single Column

Shape

Degree of Protection IP65 (IEC 60529) (Note) IP40 (IEC 60529)

Material (Box) Die-cast aluminum or cast aluminum Carbon steel plate

Coating Color 5Y7/1 semi-gloss, melamine coating (outside only) 5Y7/1 semi-gloss, melamine coatingStandard Operating Conditions


Style Wall mount (1 to 5 holes)Pole mount (1 to 5 holes)

Wall mount: 4 or 5 holes × 2 columns, 6 holes × 2 or 3 columns

Pole mount: 4 or 5 holes × 2 columns, 6 holes × 2 or 3 columns

Wall mount (1 to 5 holes)


Entrance hub(Gland hubs are also available)Standard depth control boxes1 to 3 holes: HNA22 G3/4 (22 mm) × 14 or 5 holes: HNA33 G1 (28 mm) × 1Deep control boxes1 or 2 holes: HNA22 G3/4 (22 mm) × 13 to 5 holes: HNA33 G1 (28 mm) × 1

Entrance hub(Gland hubs are also available)4 to 6 holes × 2 columns: HNA33 PF1 (28 mm) × 26 holes × 3 columns: HNA33 PF1 (28 mm) × 3



IDEC ø30 mm series, AM ammeter(except enclosed type units) IDEC ø30 mm series

Enclosure Size

Standard depth enclosures: 150, 200, 300H × 86W × 82D mmDeep enclosures: 150, 200, 300H × 86W × 125D mm

2 columns: 320H × 210W × 100D mm3 columns: 380H × 280W × 132D mm

100, 150, 200, 250, 300H × 80W × 76D mm

Page 12 18 24

3


FB Series Plastic EnclosuresSize 76mm 140mm

Model FB1 FB2·2 switches/pilot lights FB2·3 switches/pilot lights

Shape

Degree of ProtectionIP65 (with switches/pilot lights)NEMA Type 4X Indoor Use Only (with switches/pilot lights compliant with Type 4X-compliant)NEMA Type 1 (with switches/pilot lights not compliant with Type 4X-compliant)

Material Cover/base: polycarbonate, Cover mounting screws: stainless steel

Cover Color Light beige, yellow Light beige


Operating temperature: –25 to +60°C (no freezing)Relative humidity: 45 to 85% RH (no condensation)

Mounting Holes 0: without mounting hole (light beige only)1: ø22

0: without mounting hole2: ø22, mounting centers 50mm3: ø22, mounting centers 30mm

Applicable Switches/Pilot Lights IDEC’s HW/TW/XW series and accessories

Enclosure Size 76H × 76W × 59.5D 140H × 76W × 59.5D

Page 27 27 27

Size 200mm

Model FB3·3 switches/pilot lights FB3·4 switches/pilot lights FB3·5 switches/pilot lights

Shape

Degree of ProtectionIP65 (with switches/pilot lights)NEMA Type 4X Indoor Use Only (with switches/pilot lights compliant with Type 4X-compliant)NEMA Type 1 (with switches/pilot lights not compliant with Type 4X-compliant)

Material Cover/base: polycarbonate, Cover mounting screws: stainless steel

Cover Color Light beige


Operating temperature: –25 to +60°C (no freezing)Relative humidity: 45 to 85% RH (no condensation)

Mounting Holes

0: without mounting hole3: ø22, mounting centers 50mm4: ø22, mounting centers 36mm5: ø22, mounting centers 30mm

Applicable Switches/Pilot Lights IDEC's HW/TW/XW series and accessories

Enclosure Size 200H × 76W × 59.5D

Page 27 27 27

4

Model AGS

Columns Single Column Multiple Column

Shape

Degree of Protection IP65 (IEC 60529) (Note)

Material (Box) Stainless steel

Coating Color 5Y7/1 semi-gloss, melamine coating (outside only) 5Y7/1 semi-gloss, melamine coating (both inside and outside)Standard Operating Conditions



Wall mount (3 to 5 holes × 2 columns, 3 to 5 holes × 3 columns)Pole mount (3 to 5 holes × 2 columns, 3 to 5 holes × 3 columns)


Reducer bushing for connecting a thick steel conduit to lead in cables1 to 3 holes: G3/4 (22 mm) × 14 or 5 holes: G1 (28 mm) × 1

Reducer bushing for connecting a thick steel conduit to lead in cables2 or 3 holes × 2 columns: G3/4 (22 mm) × 24 or 5 holes × 2 columns: G1 (28 mm) × 22 or 3 holes × 3 columns: G3/4 (22 mm) × 34 or 5 holes × 3 columns: G1 (28 mm) × 3


IDEC ø30mm series, AM ammeter (except enclosed type units)

Enclosure Size 150, 200H × 90W × 107D mm (1 to 3 holes)350H × 118W × 107D mm (4 or 5 holes)

230, 350H × 220W × 108D mm (2 columns)250, 350H × 310W × 108D mm (3 columns)

Page 34

Note: The degree of protection for AGAW, AGA, and AGS depends on the switches and pilot lights to be mounted. See page 2.

Safety Precautions

• Be sure to turn off power before mounting, removal, wiring, maintenance, and inspection. Otherwise, electric shock or fire hazard may occur. • Use wires of a proper size to meet voltage and current requirements. Tighten terminal screws with a proper tight-ening torque. Loose terminal screws may cause abnormal heat and fire. Check periodically for looseness due to vibrations.

• To avoid burning your hand, use a lamp holder tool when replacing lamps. • Be sure to use within the rated specifications. Otherwise, electric shock or fire may occur.


5

IP40 Enclosed Steel Control Stations Mounting of ø22 mm Switches and Pilot Lights with Space-Saving DesignThe KGNW control stations are designed for mounting IDEC ø22 mm (7/8 inch) switches and pilot lights. • Various standard control stations are available from one to four holes with most widely used combinations of switches and pilot lights (con-tact configurations, voltage, button colors, and nameplates). • Enclosures only are also available, in which specifically selected TW series can be mounted as required.

KGNW Control Station with four ø22 mm swiches/pilot lights

KGN Control Station with three ø30 mm switches/pilot lights

Ideal for small control stations

200mm

• HW series can also be installed.

SpecificationsDegree of Protection IP40 (IEC60529)

Material (Box) Carbon steel plate (t=1.0mm)

Coating Color(Melamine coating) Yellow semi-gloss (Munsell 5Y7/1)

Rated Insulation Voltage 600V

Insulation Resistance 5 MΩ minimum

Dielectric Strength Between live and dead parts: 2500V AC, 1 minute



Enclosure Style Wall mount (1 holes)

Cable Lead-in(Wall Mount Type)


Applicable Switches/Pilot Lights IDEC ø22 mm TW/HW series

Contact Ratings (Contact Block)

Contact Block


Rated Thermal Current 10A

Contact Ratings by Utilization Category IEC60947-5-1

AC-15 (A600)DC-13 (P600)

Operational Voltage and Current by Utilization CategoryOperational Voltage 24V 48V 50V 110V 220V 440V

Ope

ratio

nal C

urre

nt AC (50/ 60Hz)

AC-12 Control of resistive loads and solid state loads

10A — 10A 10A 6A 2A

AC-15 Control of electromagnetic loads (>72VA)

10A — 7A 5A 3A 1A

DC

DC-12 Control of resistive loads and solid state loads

8A 4A — 2.2A 1.1A —

DC-13 Control of electromagnets 4A 2A — 1.1A 0.6A —

CommonMinimum applicable load (reference value) = 3V AC/DC, 5 mA (the applicable range is subject to change according to the operating conditions)

Rubber Bushing (Supplied) Color: BlackEnclosure

StyleSupplied Bushing Applicable

Knockout HolePart No. Outside Dia. Inside Dia.1 or 2 holes GB-2 ø30 mm ø16 mm ø20 or ø22 mm3 or 4 holes GB-3 ø38 mm ø20 mm ø27 mm

Switches/Pilot Lights Mounting HolesThe holes for mounting switches and pilot lights are 22.2 mm in diameter with an anti-rotation notch. Mounting centers are 50 mm on 2- and 3-hole enclosures, and 36 mm on 4-hole enclosures.

Double KnockoutsThe top and bottom surfaces have double knockouts.

On top: ø22 and ø27 mm double knockouts On bottom: ø16 and ø20 mm double knockouts

One rubber bushing is supplied to protect lead-in wires from damage on the wire surface; 1- and 2-hole enclosures are supplied with a bushing to fit ø20 and ø22mm holes, and 3- and 4-hole enclosures with a bushing to fit a ø27 mm hole.

ø22/ø27 mm Double Knockout

Rubber Bushing

Switches/pilot lights

Cover Fastening Screws


KGNW Series Control Stations

6


Control Stations with Switches/Pilot LightsThe control stations are available with selected combination of switches and pilot lights as listed below. For the dimensions and mounting centers, see the figures on page 7.

Switches/Pilot Lights Part No. Specifications

PushbuttonPB

ABW110 * Flush, 1NO

ABW101 * Flush, 1NC

ABW111 * Flush, 1NO-1NC

ABW411 * ø40 mushroom, 1NO-1NC

Pilot LightPL (Incandescent)

APW116 * Round flush, 110V AC

APW126 * Round flush, 220V AC

Selector SwitchSS

ASW211 Knob, 2-position, 1NO-1NC

ASW320 Knob, 3-position, 2NO

ASW2K11 Key, 2-position, 1NO-1NC

Note: Specify a button or lens color code in place of *: Pushbutton: B (black), G (green), R (red) Pilot Light: G (green), R (red), W (white)

Control Stations Package Quantity: 1

Control Station Mounted Switches/Pilot Lights

Style Part No. Symbol Part No. NWA Nameplate Legend

Wal

l Mou

nt /

1 ho

le

KGNW1101Y PB ABW110B ON

KGNW1102Y PB ABW411R Without nameplate

KGNW1103Y PL APW116R Without nameplate

KGNW1104Y PL APW126R Without nameplate

KGNW1105Y SS ASW211 HAND-AUTO

KGNW1106Y SS ASW320 HAND-OFF-AUTO

KGNW1107Y SS ASW2K11 OFF-ON

Wal

l Mou

nt /

2 ho

les

KGNW2101YPB

PBABW110BABW101R

ONOFF

KGNW2102YPB

PBABW111BABW111R

ONOFF

KGNW2103YPL

PLAPW116RAPW116G Without nameplate

KGNW2104YPL


KGNW2105YPL

PBAPW116RABW111R

Without nameplateSTOP

KGNW2106YPL

PBAPW126RABW111R


KGNW2107YPL

SSAPW116RASW211

Without nameplateHAND-AUTO

KGNW2108YPL

SSAPW126RASW211


KGNW2109YPL

SSAPW116RASW2K11

Without nameplateOFF-ON

KGNW2110YPL

SSAPW126RASW2K11


KGNW2113YPB

PBABW110BABW411R

ONWithout nameplate



Wal

l Mou

nt /

3 ho

les

KGNW3102YPL

PB

PB

APW116RABW110BABW101R

Without nameplateONOFF

KGNW3103YPL

PB

PB



KGNW3104YPB

PB

SS

ABW111BABW111RASW211

ONOFFHAND-AUTO

KGNW3105YPL

PL

PL

APW116WAPW116RAPW116G

Without nameplate

Wal

l Mou

nt /

4 ho

les

KGNW4101Y

PL

PL

PB

PB

APW126RAPW126GABW111BABW111R

Without nameplateWithout nameplateONOFF

KGNW4102Y

PL

PB

PB

SS

APW126RABW111BABW111RASW211

Without nameplateONOFFHAND-AUTO

7


Empty Enclosures Package Quantity: 1

Style Part No.Unit

Mounting Hole

Switches/Pilot Lights Mounting

Centers

1 hole(approx. 0.4 kg)

KGNW111Y With

NP

3

KGN110Y Without

2 holes(approx. 0.5 kg)

KGNW212Y With

NP 2228

KGN210Y Without


KGNW313Y With

NP

350

47

KGN310Y Without

4 holes(approx. 0.6g) KGNW314Y With

3620

1636


KGNW414Y With

5050

N P

2822

KGN410Y Without


KGNW515Y With 5050

5047

KGN510Y Without

Switches/Pilot Lights Mounting Hole

24

3.5

ø22.2

70 1Front

Accessories Package Quantity: 1

Name Part No. Applicable Enclosure

Applicable Knockout Hole

Rubber Bushing

GB-2

KGNW111Y

ø20 or ø22 mmKGN110Y

KGNW212YKGN210Y

GB-3

KGNW313Y

ø27 mm

KGN310YKGNW314YKGNW414YKGN410Y

KGNW515YKGN510Y

Dimensions All dimensions in mm.

KGNW

30max.80 76

L

37M4 grounding terminal

M4 grounding terminalø22/ø27 double knockout

ø16/ø20 double knockout

(Mou

ntin

g ho

le c

ente

rs)

6-5 × 8mounting holes

L1

60

L3

L2

(Centers)

1 hole 2 holes 3 holes 4 holes 5 holes111Y 212Y 313Y 314Y 414Y 510Y

L 100 150 200 200 250 250L1 50 100 150 150 200 250L2 75 125 175 175 225 275L3 80 130 180 180 230 280

Weight (Approx.) 0.4 kg 0.5 kg 0.6 kg 0.6 kg 0.7 kg 0.8 kg

InstructionsPrecautions for Opening the Knockout Hole1. The metal piece for the inner

hole of ø22 or ø16 mm knock-out has two linked parts to the outer hole. When breaking the knockout to make an inner hole, strike the inner metal piece at the cut parts (the hatched parts shown as point A at right) using a screwdriver tip or similar tool.

2. When opening a larger hole of ø27 or ø20 mm, first make a smaller hole as described above. Then break the knock-out for the larger hole using pliers.

Ordering InformationWhen ordering control stations with switches/pilot lights: Specify the Part No. of the control station.

When ordering enclosures without switches/Pilot lights:Specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switches/pilot lights to be

mounted (lens color, button color, etc.)3. Nameplate4. Other specifications

Ordering Example

Note: Any ø22 mm TW series are selectable. Take the effective depth inside the enclosure into consideration.

24.1

3.2

ø22.3

Effective Depth inside the Enclosure

All dimension in mm

Point A

Part No. of Enclosure KGNW313Y

Switches/Pi-lot Lights and Nameplate

APW126RABW210G, with NWA-1ABW201R, with NWA-2

8

IP65 Waterproof Aluminum Control Stations for ø22 mm Switches/Pilot LightsAGAW control stations are designed for mounting IDEC ø22 mm (7/8 inch) switches/pilot lights.

• Various control stations are available from one to four holes with most widely used combinations of switches/pilot lights (contact configurations, voltage, button colors, and name-plates). • Enclosures only are also available, in which specifically selected TW series can be installed.

200

mm

AGAW Control Box with four ø22 mm switches/pilot lights

AGA Control Box with three ø30 mm switches/pilot lights

Ideal for small control boxes

• HW series can also be installed.

SpecificationsDegree of Protection

(Note)IP65 (IEC60529) (Key selector switch: Splash-proof IP54)

Material (Box) Aluminum alloy die-castCoating Color(Melamine coating) Yellow semi-gloss (Munsell 5Y7/1, outside only)



Dielectric Strength Between live and dead parts: 2500V AC, 1 minute


Ambient temperature: -25 to +50°C (no freezing)Relative humidity: 45 to 85% (no condensation)


Cable Lead-in(Wall Mount)

Entrance hub1 to 3 holes: HNA22 G3/4 (22 mm)4 to 5 holes: HNA33 G1 (28 mm)

Applicable Switches/Pilot Lights IDEC ø22 mm TW series

Note: The degree of protection depends on the switches/pilot lights mount-ed in the enclosure. When IP65 switches/pilot lights are mounted, the entire control station has IP65 characteristics. (See page 2)


Contact Block

Rated Insulation Voltage 600VRated Thermal Current 10AContact Ratings by Utilization Category IEC60947-5-1

AC-15 (A600)DC-13 (P600)


Ope

ratio

nal C

urre

nt AC (50/

60Hz)


10A — 10A 10A 6A 2A


10A — 7A 5A 3A 1A

DC


8A 4A — 2.2A 1.1A —


CommonMinimum applicable load (reference) = 3V AC/DC, 5mA (the applicable range is subject to change according to the operating conditions)Switch/Pilot Light Mounting HolesThe holes for mounting switches/pilot lights are 22.2 mm in diam-eter with an anti-rotation notch.Mounting centers are 50 mm on 2- and 3-hole enclosures, and 36 mm on 4-hole enclosures.Waterproof BushingFour plastic bushings are provided inside the corners for mount-ing screws to secure the control station on a panel surface. Lead-in Fittings (Wall Mount)An entrance hub made of aluminum is supplied for connecting a steel conduit to lead in cables.

1 to 3 holes: With HNA22 G3/4 for 22 mm conduit4 holes: With HNA33 G1 for 28 mm conduit

HNAG gland hubs for lead in cables are also available. Stand Pole (Pole Mount) The pole is made of carbon steel pipe, and the base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss).

Enclosure

Switch/Pilot Light

Stainless Steel Screws

Pole

BaseWaterproof BushingEntrance Hub

Unit Mounting Hole

AGAW Series Control Stations

9


Control Stations with Switches/Pilot Lights The control stations are available with a selected combina-tion of switches/pilot lights as listed below. For the dimen-sions and mounting centers, see the figures on page 10.

Switch/Pilot Light Part No. Specifications

PushbuttonPB

ABW110 * Flush, 1NOABW101 * Flush, 1NCABW111 * Flush, 1NO-1NCABW411 * ø40 mushroom, 1NO-1NC


APW116 * Round flush, 110V ACAPW126 * Round flush, 220V AC

Selector SwitchSS

ASW211 Knob, 2-position, 1NO-1NCASW320 Knob, 3-position, 2NOASW2K11 Key, 2-position, 1NO-1NC

Note: Specify a button or lens color code in place of * : Pushbutton: B (black), G (green), R (red) Pilot Light: G (green), R (red), W (white)




Wal

l Mou

nt /

1 ho

le

AGAW1101Y PB ABW110B ON

AGAW1102Y PB ABW411R Without nameplate

AGAW1105Y SS ASW211 HAND-AUTO

AGAW1107Y * SS ASW2K11 OFF-ON

Pol

e M

ount

/ 1

hole

AGAW1101SY PB ABW110B ON

AGAW1102SY PB ABW411R OFF

Wal

l Mou

nt /

2 ho

les

AGAW2101YPB

PBABW110BABW101R

ONOFF

AGAW2102YPB

PBABW111BABW111R

ONOFF

AGAW2103YPL


AGAW2104YPL


AGAW2105YPL

PBAPW116RABW111R


AGAW2106YPL

PBAPW126RABW111R


AGAW2107YPL

SSAPW116RASW211


Degree of protection marked with * is splash-proof IP54.



Wal

l Mou

nt /

2 ho

les

AGAW2108YPL

SSAPW126RASW211


AGAW2109Y *PL

SSAPW116RASW2K11


AGAW2110Y *PL

SSAPW126RASW2K11


AGAW2113YPB

PBABW110BABW411R

ONWithout nameplate

Pol

e M

ount

/ 2

hole

s

AGAW2101SYPB

PBABW110BABW101R

ONOFF

Wal

l Mou

nt /

3 ho

les

AGAW3102YPL

PB

PB



AGAW3103YPL

PB

PB



AGAW3104YPB

PB

SS


ONOFF

HAND-AUTO

Pol

e M

ount

/ 3

hole

s

AGAW3102SYPL

PB

PB



AGAW3104SYPB

PB

SS


ONOFF

HAND-AUTO

Wal

l · P

ole

/ 4 h

oles

Wall MountAGAW4101Y

PL

PL

PB

PB

APW126RAPW126GABW111BABW111R

Without nameplateWithout nameplate

ONOFFPole Mount

AGAW4101SY

Wall MountAGAW4102Y

PL

PB

PB

SS

APW126RABW111BABW111RASW211


HAND-AUTOPole MountAGAW4102SY


10



Style Part No. Unit Mount-ing Hole

Switch/Pilot Light Mounting Centers


AGAW211Y With

G3/4 (22mm)Hub HNA22

NP

AGA210Y Without

2 holes(approx. 0.6 kg) AGAW212Y With

NP

2723

G3/4 (22mm)Hub HNA22


AGAW313Y With

NP50

248

G3/4 (22mm)Hub HNA22AGA310Y Without

4 holes(approx. 0.7 kg) AGAW314Y With

NP

36

G1 (28mm)Hub HNA33

4 holes(approx. 0.9 kg) AGAW514Y Without


KGNW515Y WithKGN510Y Without

Switch/Pilot Light Mounting Hole

24

3.5

ø22.2

An entrance hub is supplied. 1 to 3 holes: With HNA22 G3/4 for

22 mm conduit4 holes: With HNA33 G1 for 28

mm conduit

77

70

79

Standard


AGAW Control Station (Wall Mount)

(72)

(1.2

)

(95) (132)

8286

L

30

30max.Shade

HubM4 grounding terminal

HN

A22

: 31

HN

A33

: 35

Nameplate

O N

O F F

4-ø4.4Mounting holes

60 (Centers)

I

• Entrance Hub (attached)1 to 3 holes: HNA22 G3/4 (22 mm)4 holes: HNA33 G1 (28 mm)

• Gland hubs for leading in cables are also available. See page 39 for details.

Part No. Applicable Cable Diameter (R)

HNG21 8, 10, 12HNAG22 13, 15, 17HNAG33 18, 20, 22


L 100 150 200 200 300 300l 114 114 164 164 264 264


AGAW Control Station (Pole Mount)

ø200

(1.2

)(7

2)

(95)

ø230

10

100

LH

86 82(132)

4-ø14Mounting hole

M6Grounding terminal

Shade

1 hole 2 holes 3 holes 4 holes 4 holes 5 holesH 1350 1400 1500 1500L 150 200 300 300

Weight (Approx.) 6.1 kg 6.2 kg 6.4 kg 6.4 kg

24

3.5

ø22.2


11


Accessory (Options) Package Quantity: 1

Name & Shape Part No. Description & Dimensions

Enclosure Shade

13295

70

Material: Carbon steel plateThickness: 1 mmWeight: Approx. 0.25 kg

AGZ-S1Y

• Protection for switches/pilot lights against direct sunlight and falling objects.

• Color: Yellow (semi-gloss) • Shade mounting hole

2-M4 tapped hole: Depth 5Pilot hole: Depth 5.5 max. (no penetration)

68

46.5

Stand Pole

Weight: Approx. 5.6 kg

AGZ-S205

• For replacement of the base and pole. • Color: Yellow (semi-gloss)

(100

5)

ø52

4-ø6.5 Hole

6551

7250

10

(119

9)

(8 t

o 9)

942 1°

100

ø230

ø200

Sealing base

Grounding terminal (8 to 9)

PoleOutside Dia.: ø48.6Inside Dia.: ø44.0

Stand gasket

Base

4-ø14 Hole

InstructionsPrecautions for Mounting on Panel (Wall) 1. Insert M4 screws into the

waterproof bushings at all four corners inside the box. Push the screws with a screwdriver and penetrate the bushings (Figure 1).

2. Thrust the screws into panel holes and secure the screws with nuts (Figure 2). Waterproof characteristics are not affected by piecing the bushings with screws.

Ordering InformationWhen ordering control stations with switches/pilot lights:Specify the Part No. of the control station.

When ordering enclosures without switches/pilot lights:Specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switches/pilot lights to be

mounted (lens color, button color, etc.)3. Nameplate4. Lead-in fitting

Only when ordering the gland hub for leading in cables, specify the Part No. and the finished cable outside diameter (R).

5. Other specifications

Ordering Example

Note: Any ø22 mm TW/HW series are selectable. Take into con-sideration the degree of protection of the switches/pilot light and the effective depth of the enclosure.

Figure 1

BoxWaterproof Bushing

13

Figure 2Panel surface Part No. of Enclosure AGAW313Y

Switch/Pilot Light and Nameplate

APW126RABW210G, with NWA-1ABW201R, with NWA-2

Lead-in Fitting HNAG22 R15

All dimensions in mm.

12

IP65 Waterproof Aluminum Control Stations for ø30 mm Switches/Pilot LightsVarious control stations are available from one to five holes with most widely used combinations of switches/pilot lights (contact configurations, voltage, button colors, and name-plates). • Versatile combinations of switches/pilot lights are possible. Select from a wide variety of 30 mm (1-13/64 inch) dia. switches/pilot lights as required. • In addition to standard depth enclosures, deep enclosures are also available for mounting illuminated pushbuttons which require a large depth behind the mounting surface. (See page 15 for more details).

SpecificationsDegree of Protection (Note 1)

IP65 (IEC60529)(Key selector switch: Splash-proof IP54)

Material (Enclosure) Aluminum alloy die-castCoating Color(Melamine coating) Yellow semi-gloss (Munsell 5Y7/1, outside only)

Rated Insulation Voltage 600V (Buzzer: 250V)


Dielectric Strength (Note 2)

Between live and dead parts: 2500V AC, 1 minute

Standard Operating Conditions (Note 3)


Enclosure Style Wall mount (1 to 5 holes)Pole mount (1 to 5 holes)

Cable Lead-in Hole(Wall Mount)

Entrance hub (Gland hub also available)1 to 3 holes: HNA22 G3/4 (22 mm)4 or 5 holes: HNA33 G1 (28 mm)

(Standard control stations)

Applicable Switch-es/Pilot Lights

IDEC ø30 mm seriesAZ buzzer and AM ammeter(except enclosed type units)

Note 1: The degree of protection depends on the switches/pilot lights mounted on the enclosure. When IP65 switches/pilot lights are mounted, the entire control station has IP65 characteristics. (See page 2)

Note 2: AM ammeter/buzzer: 2000V AC, 1 minute Note 3: Buzzer: -10 to +40°C


Contact Block


AC-15 (A600)DC-13 (P600)


Ope

ratio

nal C

urre

nt AC (50/

60Hz)


10A — 10A 10A 6A 2A


10A — 7A 5A 3A 1A

DC


10A 5A — 2.2A 1.1A —


CommonMinimum applicable load (reference) = 3V AC/DC, 5mA (the applicable range is subject to change according to the operating conditions )Switch/Pilot Light Mounting HolesThe holes for mounting switches/pilot lights are 30.5 mm in diam-eter with an anti-rotation notch. Mounting centers are 50 mm.Waterproof Bushing Four plastic bushings are provided inside the corners for mount-ing screws to secure the control station on a panel surface. Lead-in Fittings (Wall Mount)An entrance hub made of aluminum is supplied for connecting a steel conduit to lead in cables.

1 to 3 holes: With HNA22 G3/4 for 22mm conduit4 or 5 holes: With HNA33 G1 for 28mm conduit

HNAG gland hubs for leading in cables are also available. Stand Pole (Pole Mount) The pole is made of carbon steel pipe, and the stand base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss).

Enclosure

Switch/Pilot Light

Unit Mounting Hole


Pole

Base

Waterproof BushingEntrance Hub

AGA Series Control Stations (Single Column)

13


Control Stations with Switches/Pilot Lights Control boxes are available with a selected combination of switches/pilot lights as listed below. For the dimensions and mounting centers, see the figures on pages 15 and 16.

Switches/Pilot Lights Mounted on Standard Control StationsSwitch/Pilot Light Part No. Specifications

PushbuttonPB

ABN110 * Flush, 1NOABN101 * Flush, 1NCABN111 * Flush, 1NO-1NCABN311R ø40 mushroom, 1NO-1NCABBN1110 ** Flush, double beam latching, 1NO

ABBN1111 ** Flush, double beam latching, 1NO-1NC

ATN420 Toggle lever, 2NOHN1E-BV411R Emergency stop, 1NO-1NC


APN118 * Dome, 110V AC (2W)APN128 * Dome, 220V AC (2W)

Selector SwitchSS

ASN311 Knob, 2-position, 1NO-1NCASN111 Knob, 3-position, 1NO-1NCASN3K11 Key, 2-position, 1NO-1NC

BuzzerSS

AZ11N 110V ACAZ12N 220V AC

MeterA AM ammeter

Specify capacity (Part No.)Coating color of the meter bezel: N1.5

Note: Specify a button or lens color code in place of *: Pushbutton: B (black), G (green), R (red) Pilot Light: G (green), R (red), W (white) Flush pushbuttons are supplied with black, green, and red color caps.

Capacity and Part No. of AM AmmetersCapacity Part No. Remarks

Ammeter

5A (nominal) AM21B

• Use a current transformer on am-meters of 30A rating or more.

10A (nominal) AM22B15A (nominal) AM23B

30/5A (nominal) AM24CB60/5A (nominal) AM25CB

100/5A (nominal) AM26CB150/5A (nominal) AM27CB200/5A (nominal) AM28CB300/5A (nominal) AM29CB

/5A (nominal) AM2CB *

Note 1: When ordering, specify the Part No. Also specify a current value for the ammeter marked with *.

Note 2: The dial has a double-expanded scale. Also available are for triple-expanded scales, 1A meters and other special ratings. Con-tact IDEC for details about other special specifications.

Package Quantity: 1


Style Part No. Symbol Part No. NA Nameplate Legend

Wal

l Mou

nt /

1 ho

le

AGA1101Y PB ABN110 ON

AGA1102Y PB ABN311R OFF

AGA1103Y PL APN118R Without nameplate

AGA1104Y PL APN128R Without nameplate

AGA1105Y SS ASN311 HAND-AUTO

AGA1106Y SS ASN111 HAND-OFF-AUTO



Wal

l Mou

nt /

1 ho

le

AGA1107Y * SS ASN3K11 OFF-ON

AGA1108Y BZ AZ11N Without nameplate

AGA1109Y BZ AZ12N Without nameplate

AGA1110Y PB ATN420 Without nameplateON-OFF on bezel

AGA1111Y PBHN1E-BV411R

EMERGENCYSTOP

Pol

e M

ount

/ 1

hole

AGA1101SY PB ABN110 ON

AGA1102SY PB ABN311R OFF

AGA1111SY PBHN1E-BV411R

EMERGENCYSTOP

Wal

l Mou

nt /

2 ho

les

AGA2101YPB

PBABN110ABN101

ONOFF

AGA2102YPB

PBABN111ABN111

ONOFF

AGA2103YPL

PLAPN118RAPN118G Without nameplate

AGA2104YPL


AGA2105YPL

PBAPN118RABN111


AGA2106YPL

PBAPN128RABN111


AGA2107YPL

SSAPN118RASN311


AGA2108YPL

SSAPN128RASN311


AGA2110Y *PL

SSAPN128RASN3K11


AGA2111YPB

PBABBN1110 ON-OFF

AGA2112YPB

PBABBN1111 ON-OFF

AGA2113YPB

PBABN110ABN311R

ONOFF

AGA2115YPL

PBAPN128RATN420

Without nameplateON-OFF on bezel

AGA2116YBZ

PBAZ11NABN111 Without nameplate

AGA2117YBZ


AGA2118YBZ

PLAZ11NAPN118R Without nameplate

AGA2119YBZ



14




Pol

e M

ount

/ 2

hole

s AGA2101SYPB

PBABN110ABN101

ONOFF

AGA2107SYPL

SSAPN118RASN311


Wal

l Mou

nt /

3 ho

les

AGA3102YPL

PB

PB

APN118RABN110ABN101


AGA3103YPL

PB

PB

APN128RABN110ABN101


AGA3104YPB

PB

SS

ABN111ABN111ASN311

ONOFF

HAND-AUTO

AGA3105YPL

PL

PL

APN118WAPN118RAPN118G

Without nameplate

AGA3106YPL

PL

PL


Without nameplate

AGA3107YPL

PB

PB

APN118R

ABBN1110


AGA3108YPL

PB

PB

APN128R

ABBN1110




Pol

e M

ount

/ 3

hole

s

AGA3102SYPL

PB

PB

APN118RABN110ABN101


AGA3104SYPB

PB

SS

ABN111ABN111ASN311

ONOFF

HAND-AUTO

Wal

l · P

ole

/ 4 h

oles

Wall MountAGA4101Y

PL

PL

PB

PB

APN128RAPN128GABN111ABN111


ONOFFPole Mount

AGA4101SY

Wall MountAGAM4101Y A

PB

PB

(Note) AM ammeter

ABN111ABN111

Without nameplate

ONOFF

Pole MountAGAM4101SY

Wall MountAGA4102Y PL

PB

PB

SS

APN128RABN111ABN111ASN311


HAND-AUTOPole MountAGA4102SY

Wal

l · P

ole

/ 5 h

oles

Wall MountAGA5101Y

PL

PL

PB

PB

SS

APN128RAPN128GABN111ABN111ASN311


ONOFF



PL

PB

PB

(Note)AM ammeter

APN128RABN111ABN111

Without nameplate



Note: Specify the Part No. of the meter to select a required capacity.

15



Style 1 or 2 holes 3 holes 4 or 5 holes

Part No.

AGA210Y AGA211Y AGA212Y AGA310Y AGA311Y AGA411Y AGA412Y AGA510Y AGA511Y AGA512YAGA210DY AGA211DY AGA212DY AGA310DY AGA311DY AGA411DY AGA412DY AGA510DY AGA511DY AGA512DYAGA210HLY AGA211HLY AGA212HLY AGA310HLY AGA311HLY AGA411HLY AGA412HLY AGA510HLY AGA511HLY AGA512HLY

Shape 50 50

50

5075

50

5075

Weight (Approx.) 0.6 kg 1.0 kg 0.5 kg 0.7 kg 1.2 kg 0.6 kg 0.9 kg 1.4 kg 0.8 kg

: Standard depth enclosure with an entrance hub1 to 3 holes: With HNA22 G3/4 entrance hub for 22 mm conduit4 or 5 holes: With HNA33 G1 entrance hub for 28 mm conduit

: Deep enclosure with an entrance hub1 or 2 holes: With HNA22 G3/4 entrance hub for 22 mm conduit3 to 5 holes: With HNA33 G1 entrance hub for 28 mm conduit

: Standard depth enclosure without an entrance hub1 to 3 holes: With a threaded hole G3/4 (22 mm) at the bottom4 or 5 holes: With a threaded hole G1 (28 mm) at the bottom

• Switch/Pilot Light Mounting Holes

31.7 4.5

ø30.5

(Meter Mounting Hole)

112.5

121

11977

70

79

Deep enclosure

Standard depth enclosure

In addition to the enclosures shown above, enclosures with a shade and pole mount enclosures are also available. See the list below and page 16.

Other Types (For 1, 2 or 3 holes) Package Quantity: 1

Style 1 or 2 holes 3 holesHub Shade Pole

Part No.


X X AGA210KY AGA211KY AGA212KY AGA310KY AGA311KYX AGA210SY AGA211SY AGA212SY AGA310SY AGA311SY

X X AGA210KSY AGA211KSY AGA212KSY AGA310KSY AGA311KSYX AGA210KHLY AGA211KHLY AGA212KHLY AGA310KHLY AGA311KHLY

Deep enclosure

X X AGA210DKY AGA211DKY AGA212DKY AGA310DKY AGA311DKYX AGA210DSY AGA211DSY AGA212DSY AGA310DSY AGA311DSY

X X AGA210DKSY AGA211DKSY AGA212DKSY AGA310DKSY AGA311DKSY

Shape 50 50

Weight (Approx.)


With a shade 0.85 kg 0.85 kg 0.85 kg 0.95 kg 0.95 kgPole mount 6.1 kg 6.1 kg 6.1 kg 6.2 kg 6.2 kgPole mount with a shade 6.4 kg 6.4 kg 6.4 kg 6.5 kg 6.5 kgWith a shade (without a hub) 0.75 kg 0.75 kg 0.75 kg 0.85 kg 0.85 kg

Deep enclosure

With a shade 1.25 kg 1.25 kg 1.25 kg 1.45 kg 1.45 kgPole mount 6.75 kg 6.75 kg 6.75 kg 6.95 kg 6.95 kgPole mount with a shade 7.0 kg 7.0 kg 7.0 kg 7.1 kg 7.1 kg


• Effective Depth inside the Enclosure

16


Other Types (For 4 or 5 holes) Package Quantity : 1

Style 4 or 5 holesHub Shade Pole

Part No.



X X AGA411KSY AGA412KSY AGA510KSY AGA511KSY AGA512KSYX AGA411KHLY AGA412KHLY AGA510KHLY AGA511KHLY AGA512KHLY

Deep enclosure

X X AGA411DKY AGA412DKY AGA510DKY AGA511DKY AGA512DKYX AGA411DSY — AGA510DSY AGA511DSY AGA512DSY

X X AGA411DKSY — AGA510DKSY AGA511DKSY AGA512DKSY

Shape

50

5075

50

5075

Weight (Approx.)


With a shade 1.15 kg 1.15 kg 1.15 kg 1.15 kg 1.15 kgPole mount 6.4 kg 6.4 kg 6.4 kg 6.4 kg 6.4 kgPole mount with a shade 6.65 kg 6.65 kg 6.65 kg 6.65 kg 6.65 kgWith a shade (without a hub) 1.05 kg 1.05 kg 1.05 kg 1.05 kg 1.05 kg

Deep enclosure

With a shade 1.65 kg 1.65 kg 1.65 kg 1.65 kg 1.65 kgPole mount 6.9 kg — 6.9 kg 6.9 kg 6.9 kgPole mount with a shade 7.15 kg — 7.15 kg 7.15 kg 7.15 kg

• For details about enclosures without switches/pilot lights, see page 15.


AGA Control Station (Wall Mount)

M4groundingterminal

ShadeShade

30(55)

82(125)

(132) (175)

55

125

HubHub

M4groundingterminal

(95)

(70)

l lL

6086

ON

OFF

HN

A22

:31

HN

A33

:35IDEC

4-ø4.4 4-ø4.4

Dimensions in ( ) for a control box with a shade.

1 hole 2 holes 3 holes 4 holes 5 holesL 150 200 300| 114 164 264

Weight (Approx.) 0.6 kg 0.7 kg 0.9 kg

Entrance Hub (Supplied) (Standard depth enclosures)1 to 3 holes: With HNA22 G3/4 for 22 mm conduit4 or 5 holes: With HNA33 G1 for 28 mm conduit(Deep enclosures with an entrance hub)1 or 2 holes: With HNA22 G3/4 for 22 mm conduit

3 to 5 holes: With HNA33 G1 for 28 mm conduit

Gland hubs for leading in cables are also available.

Part No.Applicable Cable

Diameter (R)

HNG21 8, 10, 12

HNAG22 13, 15, 17

HNAG33 18, 20, 22

AGA Control Station (Pole Mount)

(70)

10 100

86(95)

95

ø230

ø200

L

ø48.6

H

OFF

ON

IDEC

(175)

55

125Shade

82(132)

Shade

M6Groundingterminal

4-ø14Mountinghole

Dimensions in ( ) for a control box with a shade.

1 hole 2 holes 3 holes 4 holes 5 holesH 1350 1400 1500L 150 200 300

Weight (Approx.) 6.1 kg 6.2 kg 6.4 kg

17



Name & Shape Part No. Description & DimensionsEnclosure Shade

132

95

70

Material: Carbon steel plateThickness: 1 mmWeight: Approx. 0.25 kg

AGZ-S1Y

• Protection for switches/pilot lights against direct sunlight and falling objects.

• Color: Yellow semi-gloss (Munsell 5Y7/1) • Shade mounting hole

2-M4 tapped hole: Depth 5Pilot hole: Depth 5.5 max. (no penetration)68

A∗

* Dimension AAGA210, 310, 510: 46.5 mmAGA210D, 310D, 510D: 90 mm

Stand Pole


AGZ-S205

• For replacement of the stand pole. • Color: Yellow semi-gloss (Munsell 5Y7/1)

(100

5)

ø52

4-ø6.5 Hole

6551

7250

10

(119

9)

(8 t

o 9)

942 1°

100

ø230

ø200

Sealing base

Grounding terminal (8 to 9)


Stand gasket

Base

4-ø14 Hole

InstructionsPrecautions for Mounting on Panel (Wall) 1. Insert M4 screws into the waterproof bushings at all four cor-

ners inside the box. Push the screws with a screwdriver and penetrate the bushings (Figure 1).

2. Thrust the screws into panel holes and secure the screws with nuts (Figure 2). Waterproof characteristics are not affected by piecing the bushings with screws.

Figure 1

BoxWaterproof Bushing

13

Figure 2Panel surface

Ordering InformationWhen ordering control stations with switches/pilot lights:Specify the Part No. of the control station.

When ordering enclosures without switches/pilot lights:Specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switches/pilot lights to be

mounted (lens color, button color, etc.)3. Nameplate4. Lead-in fitting

Only when ordering the gland hub for lead in cables, specify the Part No. and the cable outside diameter (R).


Ordering Example

Note: Any ø30 mm series switches/pilot lights are selectable. Take into consideration the degree of protection of the switches/pilot lights and the effective depth of the enclo-sure.

Part No. of Enclosure AGA311Y


APN128RABN210B, with NA-1ABN201R, with NA-2



18

IP65 Waterproof Multiple Column Aluminum Control StationsVersatile Combinations of Switches/Pilot Lights The AGA multiple column control stations are designed for mounting various types of switches/pilot lights in various combinations. Standard control stations are available with predetermined specifications of cable lead-in holes and the switches/pilot lights to be mounted (contact configurations, voltage, button colors, and nameplates).

• Versatile combinations of switches/pilot lights are possible. Select from a wide variety of 30 mm (1-13/64 inch) dia. switches/pilot lights. • The lid of the enclosure is hinged to make wiring and mainte-nance easy.

SpecificationsModel AGA480 / AGA580 AGA680 / AGA690Degree of Protection (Note 1) IP65 (IEC60529)

Material (Enclosure) Aluminum alloy die-castCoating Color(Melamine coating) Yellow semi-gloss (Munsell 5Y7/1, outside only)


Insulation Resis-tance 5 MΩ minimum




(Note 3)


Enclosure Style Wall mount/pole mount(4 × 2 or 5 × 2 holes)

Wall mount/pole mount(6 × 2 or 6 × 3 holes)


Entrance hub (Gland hub also available)HNA33 G1 (28 mm)

Applicable Switch-es/Pilot Lights

IDEC ø30 mm series, AZ buzzer and AM am-meter (except enclosed type units)

Note 1: The degree of protection depends on the switches/pilot lights mounted on the enclosure. When IP65 switches/pilot lightss are mounted, the entire control station has IP65 characteristics. (See page 2) Note 2: AM ammeter/buzzer: 2000V AC, 1 minute Note 3: Buzzer: -10 to +40°C


Contact block


AC-15 (A600)DC-13 (P600)


Ope

ratio

nal C

urre

nt

AC

(50

/60H

z) AC-12 Control of resis-tive loads and solid state loads

10A − 10A 10A 6A 2A


10A − 7A 5A 3A 1A

DC

DC-12 Control of resis-tive loads and solid state loads

10A 5A − 2.2A 1.1A −

DC-13 Control of elec-tromagnets 5A 2A − 1.1A 0.6A −

CommonMinimum applicable load (reference) = 3V AC/DC, 5mA (the applicable range is subject to change according to the operating conditions)

Switch/Pilot Light Mounting HolesThe holes for mounting switches/pilot lights are 30.5 mm in diam-eter with an anti-rotation notch. Mounting centers are 50 mm.Lead-in Fittings (Wall Mount)An entrance hub made of aluminum is supplied for connecting a steel conduit to lead in cables.AGA480 (4 × 2 holes), AGA580 (5 × 2 holes): With two HNA33 G1 for 28 mm conduit (Available with one HNA33, upon request) AGA680 (6 × 2 holes): With two HNA33 G1 for 28 mm conduitAGA690 (6 × 3 holes): With three HNA33 G1 for 28 mm conduitGland hubs for lead in cables are also available. Stand Pole (Pole Mount) The pole is made of carbon steel pipe, and the base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss).

EnclosureLid Hinge

Switch/Pilot Light

Unit Mounting Hole

Stainless Steel ScrewsPole

Base

Waterproof Bushing

Entrance Hub

AGA Series Control Stations (Multiple Column)

19


Control Stations with Switches/Pilot LightsControl stations are available with selected combination of switches/pilot lights as listed below. For the dimensions and mounting centers, see the figures below and on page 20.

Switches/Pilot Lights Mounted in Control StationsSwitch/Pilot Light Part No. Specifications

PushbuttonPB ABN111 * Flush, 1NO-1NC

Pilot Light PL (Incandescent)

APN128 * Dome, 220V AC (2W)

Selector SwitchSS ASN311 Knob, 2-position, 1NO-1NC

MeterA

AM ammeter(See page 38)

Specify capacity (Part No.)Coating color of the meter bezel: N1.5


AGA480 Control Box (Wall Mount/Pole Mount)Package Quantity: 1

Control Box Mounted Switches/Pilot Lights


4 ×

2 ho

les

Wall MountAGA4801Y PL

PL

PB

PB

PL

PL

PB

PB



ONOFFPole Mount

AGA4801SY


PB

PB

APB

PB

(Note)AM ammeter

ABN111ABN111

Without nameplate

ONOFF


Note: Specify the Part No. of the meter to select a required capacity. • Control stations with a shade are available. See page 20 for more details.

AGA580/AGA690 Control Box(Wall Mount/Pole Mount) Package Quantity: 1

Control Box Mounted Switches/Pilot Lights


5 ×

2 ho

les

Wall MountAGA5801Y

PL

PL

PB

PB

SS

PL

PL

PB

PB

SS



ONOFF



PL

PB

PB

APL

PB

PB

(Note)AM ammeter

APN128RABN111ABN111

Without nameplate



6 ×

2 ho

les

Wall MountAGA6801Y

PL

PB

PB

PL

PB

PL

PB

PB

PL

PB

PB PB

APN128RABN111ABN111APN128RABN111ABN111



Pole MountAGA6801SY

Wall MountAGAM6801Y

APL

PB

PB

APL

PL PL

PB

PB

(Note)AM ammeter


Without nameplate


ONOFF

Pole MountAGAM-6801SY

6 ×

3 ho

les

Wall MountAGA6901Y

PL

PB

PB

PL

PB

PL

PB

PB

PL

PB

PL

PB

PB

PL

PB

PB PB PB

APN128RABN111ABN111APN128RABN111ABN111



Pole MountAGA6901SY

Wall MountAGAM6901Y

APL

PB

PB

APL

PL PL

PB

PB

APL

PL

PB

PB

(Note)AM ammeter


Without nameplate


ONOFF



Style 4 holes 5 holes 6 holesPart No. AGA481Y AGA482Y AGA580Y AGA581Y AGA582Y AGA681Y AGA682Y AGA690Y AGA691Y

Shape

80

70

50

80

5075

85

80 80

70

50

80

5075

85

100

50

80

100

5075

100

160

50

160

140

Weight (Approx.) 2.6 kg 6.8 kg • Switch/Pilot Light Mounting Holes

31.7 4.5

ø30.5


• Effective Depth inside the Enclosure(4 or 5 x 2 holes)

86

92.595 Front

(6 x 2 or 3 holes)

114

120124 Front

Note: Entrance hubs HNA33YG G1 for 28mm conduit are supplied as standard. The quantity is as shown in the figure above. • In addition to the enclosures shown above, enclosures with a shade and pole mount enclosures are also available. See page 20 for more details.


20


Other Enclosures Package Quantity: 1

Style 4 or 5 × 2 holesSwitches/Pilot Lights Hubs Shade Pole

Part No.

X X X AGA4801KY AGAM4801KY − AGA5801KY AGAM5801KYX X X AGA4801KSY AGAM4801KSY − AGA5801KSY AGAM5801KSY


X X AGA481KSY AGA482KSY AGA580KSY AGA581KSY AGA582KSY

Shape

80

70

50

80

5075

85

80 80

70

50

80

5075

85

Weight(Approx.)

With switches/pilot lights and a shade 5.0 kg 6.7 kg − 5.3 kg 7.0 kgWith switches/pilot lights, pole mount with a shade 10.6 kg 12.3 kg − 10.6 kg 12.3 kg

With a shade 3.1 kg 3.1 kg 3.1 kg 3.1 kg 3.1 kgPole mount 8.0 kg 8.0 kg 8.0 kg 8.0 kg 8.0 kgPole mount with a shade 8.4 kg 8.4 kg 8.4 kg 8.4 kg 8.4 kg

Style 6 × 2 or 3 holesSwitches/Pilot Lights Hubs Shade Pole

Part No.

X X X AGA6801KY AGAM6801KY − AGA6901KY AGAM6901KYX X X AGA6801KSY AGAM6801KSY − AGA6901KSY AGAM6901KSY

X X AGA681KY AGA682KY AGA690KY AGA691KY −X AGA681SY AGA682SY AGA690SY AGA691SY −

X X AGA681KSY AGA682KSY AGA690KSY AGA691KSY −

Shape

100

50

80

100

5075

100

16050

160

140 160

5075

Weight(Approx.)

With switches/pilot lights and a shade 11.3 kg 13.0 kg − 11.3 kg 13.8 kgWith switches/pilot lights, pole mount with a shade 17.5 kg 19.2 kg − 17.5 kg 20.0 kg

With a shade 7.6 kg 7.6 kg 7.6 kg 7.6 kg −Pole mount 13.0 kg 13.0 kg 13.0 kg 13.0 kg −Pole mount with a shade 13.7 kg 13.7 kg 13.7 kg 13.7 kg −

• For more details about enclosures without switches/pilot lights, see page 19. • For more detail about switches/pilot lights mounted on control stations, see page 19.

21



AGA480/AGA580 (Wall Mount)

(35)

40

35 max.180 (Centers)(7

4) (1.2

)

(152)(290)

320

210100

80

280

(Cen

ters

)Shade

GroundingterminalM4

Hub

4-ø4.4 Mounting holes

Hin

ged

side


AGA680/AGA690 (Wall Mount)

52

735 max.

(1.2

)

(87)

(380)(192)

300

321295280

380

(35)

132

80 80

Shade

4-ø8 Mounting holes

Hub

Grounding terminalM4

Hin

ged

side


AGA480/AGA580 (Pole Mount)

(290)

(1.2

)

(74)

ø200

210 100(150)

320

100

10

(152

0)

ø230


M6Groundingterminal

Shade

Hin

ged

side


AGA680/AGA690 (Pole Mount)

(87)

(1.2

)

100

380

10

(158

0)

280(380)

130(190)

ø200ø230

M6Groundingterminal

Shade


Hin

ged

side

Weight: Approx. 17 kg

Application Examples of Control StationsAGA580 Control Station

Terminal block

Internal plateHingeø30 Control unit

AGA690 Control Station

Hinge Relay Timer

Terminal blockø30 Control unit

Entrance Hub(supplied)HNA33 G1 for 28 mm conduit2 column: 2 entrance hubs attached3 column: 3 entrance hubs attachedGland hubs for leading in cables are also available.

Part No.Applicable Cable Diameter (R)

HNG31 8, 10, 12

HNAG32 13, 15, 17

HNAG33 18, 20, 22

•See page 39 for details.

22



Name & Shape Part No. Description & DimensionsEnclosure Shade

152 290

74

For AGA480/AGA580Material: Carbon steel plateThickness: 1 mmWeight: Approx. 0.46 kg

AGZ-S2Y

• Used on AGA480/AGA580 enclosures as a protection for the switches/pilot lights against direct sunlight and falling objects. • Color: 5Y7/1 (semi-gloss) • Shade mounting hole

2-M4 Tapped hole: Depth 5Pilot hole: Depth 5.5 max. (no penetration) 180

66

Enclosure Shade

192380

87

For AGA680/AGA690Material: Carbon steel plateThickness: 1 mmWeight: Approx. 0.72 kg

AGZ-S3Y

• Used on AGA680/AGA690 control boxes as a protection for the switches/pilot lights against direct sunlight and falling objects. • Color: 5Y7/1 (semi-gloss) • Shade mounting hole

2-M4 Tapped hole: Depth 5Pilot hole: Depth 5.5 max. (no penetration)250

81

Internal Plate

(195)

( 300

)

130

250

Dimensions in ( ) for AGA690 control box

Material: Carbon steel plate (Zinc-plated)

Thickness: 2.3 mmWeight: AGZ-P2: Approx. 0.59 kg AGZ-P3: Approx. 1.05 kg

AGZ-P2(For AGA480/AGA580)

• Used to mount terminal blocks, relays, timers, and other units for internal wiring.

AGZ-P3(For AGA680/AGA690)

Stand Pole


AGZ-S205(For AGA480/AGA580)

• For maintenance of the pole. • Color: 5Y7/1 (semi-gloss)

AGZ-S205

(100

5)

ø52

4-ø6.5 Hole

6551

7250

10

(119

9)

(8 t

o 9)

942 1°

100

ø230

ø200

Sealing base

Grounding terminal


Stand gasket

Base

4-ø14 Hole(M6 × 8)

Stand Pole


AGZ-S206(For AGA680/AGA690)

AGZ-S2064-ø6.5 Hole

ø65

(7 t

o 8)

962

(100

4)(1

200)

82

8266

66

10

1º

100

ø230

ø200

Grounding terminal


Stand gasket

Base

Sealing base

4-ø14 Hole(M6 × 8)


23


InstructionsPrecautions for Mounting AGA480/AGA580 Control Stations on Panel 1. Insert M4 screws into the waterproof bushings at all four

corners inside the box. Push the screws with a screw-driver and penetrate the bushings (Figure 1).

2. Thrust the screws into panel holes and secure the screws with nuts (Figure 2).

Waterproof characteristics are not affected by piecing the bushings with screws.

Figure 1

BoxWaterproofBushing

13

Figure 2

Panel surface

Ordering InformationWhen ordering control stations with switches/pilot lights (standard):Specify the Part No. of the control station.

When ordering enclosures without switches/pilot lights:Specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switches/pilot lights to

be mounted (lens color, button color, etc.)3. Nameplate4. Lead-in fitting

Only when ordering the gland hub for leading in cables, specify the Part No. and the cable outside diameter. (R).


Ordering Example

Part No. of Enclosure AGA581Y


APN128RAPN128GABN210B, with NA-1ABN201R, with NA-2ASN311, with NA-32


Note: Any ø30 mm series switches/pilot lights are select-able. Take into consideration the degree of protec-tion of the switch/pilot light and the effective depth of the enclosure.

24

IP40 Enclosed Steel Control Stations For ø30 mm Series Switches/Pilot LightsVarious Control Stations are AvailableVarious control stations are available with most widely used combinations of switches/pilot lights (contact configurations, voltage, button colors, and nameplates).

SpecificationsDegree of Protection IP40 (IEC60529)Material (Enclosure) Carbon steel plate (t=1.0mm)Coating Color(Melamine coating) Yellow semi-gloss (Munsell 5Y7/1)





Standard Operating Conditions (Note 2)


Style Wall mount (1 to 5 holes)



Applicable Switches/Pilot Lights IDEC ø30 mm series

Note 1: Buzzer: 2000V AC, 1 minuteNote 2: Buzzer: -10 to +40°C


Contact Block


AC-15 (A600)DC-13 (P600)


Ope

ratio

nal C

urre

nt AC (50/

60Hz)


10A — 10A 10A 6A 2A


10A — 7A 5A 3A 1A

DC


10A 5A — 2.2A 1.1A —


CommonMinimum applicable load (reference value) = 3V AC/DC, 5 mA (the applicable range is subject to change according to the operating conditions)

Rubber Bushing (Supplied) Color: BlackEnclosure

StyleSupplied Bushing Applicable

Knockout HolePart No. Outside Dia. Inside Dia.1 or 2 holes GB-2 ø30 mm ø16 mm ø20 or ø22 mm3 or 4 holes GB-3 ø38 mm ø20 mm ø27 mm

Switches/Pilot Lights Mounting HolesThe holes for mounting switches/pilot lights are 30.5 mm in diameter with an anti-rotation notch. Mounting centers are 50 mm.

Double KnockoutsThe top and bottom surfaces have double knockouts.

On top: ø22 and ø27 mm double knockouts On bottom: ø16 and ø20 mm double knockouts

One rubber bushing is supplied to protect lead-in wires from damage on the wire surface; 1- and 2-hole enclosures are supplied with a bushing to fit ø20 and ø22 mm holes, and 3- and 5-hole enclosures with a bushing to fit a ø27 mm hole.


Rubber Bushing

Switch/Pilot Light

Cover Fastening Screws


KGN Series Control Stations

25


Control Stations with Switches/Pilot Lights The control stations are available with a selected combina-tion of switches/pilot lights as listed below. For the dimen-sions and mounting centers, see the figures on page 26.

Switch/ Pilot Light Part No. Specifications

PushbuttonPB

ABN110 * Flush, 1NOABN101 * Flush, 1NCABN111 * Flush, 1NO-1NCABN311R ø40 mushroom, 1NO-1NCABBN1110 ** Flush, double beam latching, 1NO

ABBN1111 ** Flush, double beam latching, 1NO-1NC

ATN420 Toggle lever, 2NOHN1E-BV411R Emergency stop, 1NO-1NC




Selector SwitchSS

ASN311 Knob, 2-position, 1NO-1NCASN111 Knob, 3-position, 1NO-1NCASN3K11 Key, 2-position, 1NO-1NC

BuzzerBZ

AZ11N 110V ACAZ12N 220V AC



Control Station Mounted Switch/Pilot Light


Wal

l Mou

nt /

1 ho

le

KGN1101NY PB ABN110 ON

KGN1102NY PB ABN311R OFF

KGN1103NY PL APN118R Without nameplate

KGN1104NY PL APN128R Without nameplate

KGN1105NY SS ASN311 HAND-AUTO

KGN1106NY SS ASN111 HAND-OFF-AUTO

KGN1107NY SS ASN3K11 OFF-ON

KGN1108NY BZ AZ11N Without nameplate

KGN1110NY PB ATN420 Without nameplateON-OFF on bezel

KGN1111NY PBHN1E-BV411R

EMERGENCY STOP

Wal

l Mou

nt /

2 ho

les

KGN2101NYPB

PBABN110ABN101

ONOFF

KGN2102NYPB

PBABN111ABN111

ONOFF

KGN2103NYPL


KGN2104NYPL


KGN2105NYPL

PBAPN118RABN111


KGN2106NYPL

PBAPN128RABN111


KGN2107NYPL

SSAPN118RASN311


Control Station Mounted Switch/Pilot Light


Wal

l Mou

nt /

2 ho

les

KGN2108NYPL

SSAPN128RASN311


KGN2109NYPL

SSAPN118RASN3K11


KGN2110NYPL

SSAPN128RASN3K11


KGN2111NYPB

PBABBN1110 ON

OFF

KGN2112NYPB

PBABBN1111 ON

OFF

KGN2113NYPB

PBABN110ABN311R

ONOFF

KGN2114NYPL

PBAPN118RATN420


KGN2116NYBZ


KGN2117NYBZ


KGN2118NYBZ


KGN2119NYBZ


Wal

l Mou

nt /

3 ho

les

KGN3102NYPL

PB

PB

APN118RABN110ABN101


KGN3103NYPL

PB

PB

APN128RABN110ABN101


KGN3104NYPB

PB

SS

ABN111ABN111ASN311

ONOFF

HAND-AUTO

KGN3106NYPL

PL

PL


Without nameplate

KGN3107NYPL

PB

PB

APN118RABBN1110


KGN3108NYPL

PB

PB

APN128RABBN1110


Wal

l Mou

nt /

4 ho

les

KGN4101NY

PL

PL

PB

PB



ONOFF

KGN4102NY

PL

PB

PB

SS



HAND-AUTO

26



Style Part No.Unit

Mounting Hole

Switch/Pilot Light Mounting Centers


KGN111Y With

KGN110Y Without


KGN211Y With

50

KGN210Y Without


KGN311Y With

KGN310Y Without


KGN411Y With

50

KGN410Y Without


KGN511Y With

KGN510Y Without

Switch/Pilot Light Mounting Hole

31.7

4.5

ø30.570 1

Front

Accessories Package Quantity: 1

Name Part No. Applicable Enclosure

Applicable Knockout Hole

Rubber Bushing

GB-2

KGN111Y

ø20 or ø22 mmKGN110YKGN211YKGN210Y

GB-3

KGN311Y

ø27 mm

KGN310YKGN411YKGN410YKGN511YKGN510Y


KGN Control Station (Wall Mount)

80 7635max.

L

37M4 grounding terminal

M4 grounding terminalø22/ø27 double knockout

ø16/ø20 double knockout

Nameplate

(Mou

ntin

g ho

le c

ente

rs)

6-5 × 8mounting holes

L1

60

L3L2

(Centers)


L 100 150 200 200 250 250L1 50 100 150 150 200 250L2 75 125 175 175 225 275L3 80 130 180 180 230 280


InstructionsPrecautions for Opening the Knockout Hole1. The metal piece for the inner hole

of ø22 or ø16 mm knockout has two linked parts to the outer hole. When breaking the knockout to make an inner hole, strike the inner metal piece at the cut parts (the hatched parts shown as point A at right) using a screw-driver tip or similar tool.

2. When opening a larger hole of ø27 or ø20 mm, first make a smaller hole as described above. Then break the knockout for the larger hole using pliers.

Ordering InformationWhen ordering control stations with switches/pilot

lights:Specify the Part No. of the control station.

When ordering enclosures without switches/pilot lights:

Specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switche/pilot light to be

mounted (lens color, button color, etc.)3. Nameplate4. Other specifications

Ordering Example

Note: Any ø30 mm series switch/pilot lIghts are selectable. However, take the effective depth inside the enclosure into consideration.


All dimension in mm

Point A

Part No. of Enclosure KGN311Y


APN128RABN210B, with NA-1ABN201R, with NA-2

27

FB Series Plastic EnclosuresIP65 lightweight plastic enclosures for installing switches/pilot lights. • ø22mm switches/pilot lights can be installed. • Blank front enclosures, without mounting holes, are also avail-able. • Blank front enclosures can also be used as junction boxes to mount terminal blocks. • Yellow cover version for emergency stop switches is also avail able. • Front panel mounting, rear panel mounting, hook mounting, and frame mounting options are available. • UL/c-UL listed.

Applicable Standards Mark Certification Organization / File No.

UL508 UL50 CSA C22.2 No. 14 CSA C22.2 No. 94

UL/c-UL listed File No. E68961 (with mounting hole)

• Contact cover box (Model: FB1BR) is not UL or c-UL listed. • Enclosures without mounting hole is not UL or c-UL listed. (Enclosures less than 1,639 cm3 is not approved by UL50, 2:8.)

Enclosure

SizeNo. of

Mounting Holes

Mounting Hole Description Cover Color Part No.

76mm

0 Without mounting hole Light beige FB1T-000Z

1 ø22mm Yellow FB1W-111Y

1 ø22mm

Light beige

FB1W-111Z

140mm

0 Without mounting hole FB2T-000Z

2 ø22mm, mounting centers 50mm FB2W-211Z


200mm

0 Without mounting hole FB3T-000Z




Specifications (Note 1)

Applicable Standards

IEC/EN60529UL508UL50CSA C22.2 No. 14CSA C22.2 No. 94


Ambient temperature: –25 to +60°C (no freezing)Relative humidity: 45 to 85%RH (no condensation)Storage temperature: –40 to +80°C (no freezing)Degree of pollution: 3

Degree of Protection

IP65 (when IP65 switches/pilot lights are installed)NEMA Type 4X Indoor Use Only (when Type 4X switches/pilot lights are installed)

Electric Shock Protection

Class II (when class II switches/pilot lights are installed)

Material Cover/base: PolycarbonateCover mounting screws: Stainless steel


IDEC’s HW/TW/XW series and accessories (Note 2) (Note 3)

Weight (approx.) 76mm: 125g (FB1W-111Z)140mm: 184g (FB2W-211Z)200mm: 243g (FB3W-311Z)

Note 1: The above specifications are for enclosures. For switches/pilot lights, refer to the specifications of each unit.

Note 2: Choose switches/pilot lights and accessories which match the mounting hole centers, effective depth behind the cover, and the thickness of the cover where switches/pilot lights are installed (3 mm). Note that enclosures with 30mm or 36mm mounting hole centers may limit the knob orien tation of selector switches, because the contact blocks can be mounted in one direction only on these mounting centers.

Note 3: An XW series emergency stop switch of screw terminal type can be installed on an enclosure with one mounting hole or mounting holes of 50mm mounting centers, by connecting one clamping terminal to one terminal pole.

Contact Cover Box

SizeNo. of

Mounting Holes

Mounting Hole Description Cover Color Part No.

76mm 1 ø22mm hole in the base Light beige FB1WR-111Z

•Cover does not have a switch/pilot light mounting hole.•For operating instructions, see page 29.

Accessories

Description Part No. Ordering No. Package Quantity

Mounting Bracket FB9Z-PK1 FB9Z-PK1 1

DIN Rail Adapter FB9Z-PK3 FB9Z-PK3PN02 2

Mounting Hole Plug LW9Z-BP1 LW9Z-BP1 1

•For the dimensions and operating instructions, see pages 32 and 33.•Connectors and nuts are supplied by users.

Parts Description

ø21.3 Knockout

59.5

76, 1

40, o

r 20

0

76

Cover Mounting Screws(Stainless Steel)

ø21.3 Knockout

Switch/Pilot Light Mounting Holes

28

FB Series Plastic Enclosures

41

CoverMounting Screws Cover

2-ø21.3Knockout

4-M4 Tapping Holes for Rear Mounting(Depth: 10 mm)

ø14 Knockout

2-Front Mounting Holes

c 76

Base

59.5 62

21

15.521

ø66 (Marking Plate Area)

ø22.3

Contact Cover (FB1WR-111Z)

* Dimensions are the same as standard.

Base

18

2-ø4.6

Switch/Pilot Light Mounting Hole Centers

Model FB1FB2 FB3

2 mounting holes

3 mounting holes

3 mounting holes

4 mounting holes

5 mounting holes

Sha

pe

50

3030 50

50

3636

36 3030

3030

Mounting Hole Dimensions

Model FB1

FB2 FB3 FB2/FB3

50mm mounting centers

36/50mm mounting centers

30mm mounting centers

Shape

13

13

3.2

3.2

ø22.3

3.2

13ø22.3

Note: For contact cover boxes, see page 27.

Dimensions76mm (FB1)

L

2-ø21.3 Knockout

Cover Mounting Screws Cover

4-M4 Tapping Screw Holes forRear Mounting (Depth: 10mm)

2-Front Mounting Holes2-ø14 Knockout

B

31

18

A C

4-R2.2

59.5 6276Base

FB2 FB3

L 140 200

A 84 144

B 104 164

C 106 166


140/200mm (FB2/FB3)

FB Series Plastic EnclosureWith ø22mm XW Series EMO Switches

4-M4 tapping holes fo rear mounting(Depth: 10mm)



Box Base

Box Cover

ø14 Knockout

ø14 Knockout



ø14 Knockout


2-ø21.3 Knockout

Box Base

Box Cover2-ø21.3 Knockout

Box Base


EMO Switch

EMO Switch

EMO SwitchCoverMounting Screws

CoverMounting Screws


59.5

18

62

21 41

2-ø4.6

2-ø4.6

2-ø4.6

21

15.5

32.2

�76

Guard (HW9Z-KG3)

Guard (HW9Z-KG4)

59.5

18

62

21 41

21

15.5

35

90

35

15.5

21 4121

62

1859

.5

�76

�76




Box Base

Box Cover

ø14 Knockout

ø14 Knockout



ø14 Knockout


2-ø21.3 Knockout

Box Base


Box Base


EMO Switch

EMO Switch




59.5

18

62

21 41

2-ø4.6

2-ø4.6

2-ø4.6

21

15.5

32.2

�76

Guard (HW9Z-KG3)

Guard (HW9Z-KG4)

59.5

18

62

21 41

21

15.5

35

90

35

15.5

21 4121

62

1859

.5

�76

�76

FB Series Plastic EnclosureWith ø22mm XW Series EMO Switches +SEMI Switch Guard (HW9Z-KG4)

Internal Dimensions

102745

Choose an enclosure in consideration of switch’s depth behindthe panel and the mounting centers of the adjacent switches.

64

46

64

130

(60)

(60)

(60)

64

70

(37.

5)(1

18.5

)

3

55

150

45

45

45

2

(6)

(6)

(6)

(6)

(6)

(6)

92

(56)

5.5

50.5

(5.5

)

(Height: 1.8mm, diameter: ø1.8mm)M3 Tapping Holes forRear Mounting (Depth: 7mm)

Internal ProjectionSwitch MountingArea Thickness

FB Series Plastic EnclosureWith ø22mm XW Series EMO Switches + SEMI Switch Guard (HW9Z-KG3)4-M4 tapping holes fo rear mounting

(Depth: 10mm)



Box Base

Box Cover

ø14 Knockout

ø14 Knockout



ø14 Knockout


2-ø21.3 Knockout

Box Base


Box Base


EMO Switch

EMO Switch




59.5

18

62

21 41

2-ø4.6

2-ø4.6

2-ø4.6

21

15.5

32.2

�76

Guard (HW9Z-KG3)

Guard (HW9Z-KG4)

59.5

18

62

21 41

21

15.5

35

90

35

15.5

21 4121

62

1859

.5

�76

�76


29


Applicable AccessoriesSeries Description

HW Series

Nameplate: HWAM, HWAQ, HWAS, HWAV-*

Marking plate for nameplate: HWNP-*

Anti-rotation ring: HW9Z-RL

EMO switch guard: HW9Z-KG3, HW9Z-KG4

Switch guard: HW9Z-K1, HW9Z-K11

Pushbutton clear boot: OC-31, OC-32

Padlock cover: HW9Z-KL1

XW SeriesEmergency Stop Switches

Nameplate: HWAV-*

EMO switch guard: HW9Z-KG3, HW9Z-KG4

Anti-rotation ring: HW9Z-RL

TW Series

Nameplate: NWA-*, NWAQ-*, NWAS-0, NWAL-0, NWAQL-0, NWAV-*

Anti-rotation ring: OGL-31

Metal protector: OLW-C

Pushbutton clear boot: OC-31, OC-32

Button cover: OCW-10*, OCW-11*

Padlock cover: HW9Z-KL1, HS9Z-PC22

Note: Confirm the specifications of enclosure, switches/pilot lights, and accessories before choosing accessories, referring to separate catalogs.

Applicable DIN RailDescription Material Part No.

DIN RailAluminum BAA1000

Steel BAP1000

End Clip Steel BNL6

Note: Use DIN rail adapters FB9Z-PK3 when installing a DIN rail in the enclosure. See page 32.

Applicable Terminal Block / TransformerSeries / Part No.

Terminal BlockBN-W Series: BN10W, BN15MW, BN15LW, BN30W

BA Series: BA111T, BA211T, BA311T

Separate Mounting Transformer TWR5**

Note: Install the terminal blocks and separate mounting transformers on a DIN rail using two DIN rail adapters (FB9Z-PK3). Choose the types and quantity of terminal blocks, transformers, end clips, and enclo sures carefully taking the specifications into consideration. The sepa rate mounting transformer can be installed on a DIN rail adapter directly.

Instructions

InstallationPanel Mounting1. Installing the FB series from the front • Using two M4 screws, install the base onto the panel. Recommended tightening torque: 1.4 to 2.0 N·m

Mounting Screws (M4) 5.0 mm (Box Thickness)

Box Base Panel

* Determine the screw length in consideration of the base and panel thickness.

* Mounting screws are not supplied with the FB series. Use M4 mount ing screws.

2. Installing the FB series from the rear • Insert four M4 tapped screws into holes for tapping screws on the back of the base (depth: 8 to 10 mm, tapping screw hole diameter: ø3.7 mm), and fasten the screws to a tightening torque of 1.3±0.1 N·m (Nitto Seiko M4-P-TITE). * Mounting screws are not supplied with the FB series. Use M4

tapping screws (recommended screws: Nitto Seiko M4-P-TITE).* The value of the recommended tightening torque has been

confirmed with a M4 tapping screw (Nitto Seiko M4-P-TITE). When using other screws, check that the tapping screw hole is not damaged and the screw can be securely tightened.

3. Installation using mounting bracket FB9Z-PK1 • Refer to installation instructions on page 31.

Installing and Removing the Switch/Pilot Light • Refer to installation instructions for each unit.

Installing the Safety Lever Lock for HW Series (HW9Z-LS, yellow)When installing the HW series in the direction shown below, install the safety lever lock with the lever in the unlocked posi-tion, lock the lever, and push in the safety lever lock.

Safety Lever Lock

1

2

3

Installing the Cable Gland • Break a desired knockout to mount a cable gland using a hammer and a screwdriver, and install the cable gland.* When breaking the knockout to make a cable gland

hole, be careful not to damage the internal contact block.

* Note that cracks or burrs on the cable gland hole will degrade the waterproof characteristics.

30


Instructions

Installing the Cover and Base • Attach the cover to the base so that the TOP mark on the cover and base are in the same direction. • Use cover mounting screws to attach the cover to the base. (Recommended tightening torque: 1.3±0.1 N·m)

TOPTOP

TOPMarking

(Cover) (Base)* Make sure that the cover and the base are attached in the correct

direction. Otherwise, the FB series may be damaged.

Installation using tapping screw hole inside the enclosure • When using M3 tapping hole screws inside the enclosure, make sue to install the devices in consideration of the insulation dis-tance and temperature rise. Damages caused by using devices other than those specified by IDEC are excluded from any war-ranty. Ensures installed with devices using tapping screw holes will not be UL or c-UL listed. • M3 tapping screw hole (depth: 6 to 7mm, tapping screw hole diameter ø2.7m) • Recommended tightening torque: 0.9 ±0.1 N·m, M3-P-TITE (Nitto Seiko)

Applicable Crimping TerminalHW/TW Series

20.2 max.

Applicable Crimping Terminal

Insulating Tube

Wire

6.0 min.

ø3.6 min.

4.0 max.

20.2 max

W

ø3.6 min.

4.0 max. 6.0 min.

W

A A

B

W dimensionsDirection of A: 8.0 maximumDirection of B: 6.6 maximum

A A

B B

B

Non-insulated Terminal

Insulated Terminal

ø3.6 min.

4.0 max. 6.0 min.6.0 min.

20.2 max.

W

Applicable Crimping Terminal Insulating Tube

Wire

XW Series (Screw Terminal)

18.3 max.

4.7 to 5.9

Applicable Crimping Terminal

Insulating TubeWireø3.2 min.

6.0 max.4.7 min.(Note)

14.9 max.

3.0 max.

ø3.2 min.

14.9 max.

3.0 max. 4.7 to 5.9

6.0 max.

Non-insulated Terminal

Insulated Terminal * When a spade terminal is used, the dimension is 4.7 to 5.9 mm.

* Be sure to install an insulating tube on the crimping terminal.

* When using crimping terminals for the XW series, use only one crimping terminal for each terminal.

* Make sure that the wiring does not contact the enclosure.

Applicable Cable Gland • Use cable glands with waterproof characteristics (IP65, TYPE 4X) which can be mounted on a panel thickness of 3 mm or more.

M20, G1/2, PG13.5

10 mm max. 30 mmmax.

Box BaseLocking ring for Cable Gland

3 mm All dimensions in mm.

* Cable gland and Locking nuts are not attached.

1. When using plastic cable gland, metal cable gland and multi-core cable

Gland Port Size Plastic Cable Gland

M20 5311 1220 [Skintop-ST-M]Applicable gasket: GPM20 (LAPP, Germany)

G1/2 5380 6030 [Skintop-ST-PF]Applicable gasket: GP 050 (LAPP, Germany)

PG13.5 5301 5030 [Skintop-ST]Applicable gasket: GP13.5 (LAPP, Germany)

2. Locking nut for installing the cable gland

Gland Port Size Locking Nut Part No. (made of plastic)

M20 HW9Z-NM20 (IDEC)

G1/2 HW9Z-G (IDEC)

PG13.5 HW9Z-PG135 (IDEC)

• The degree of protection of the cable gland examples de-scribed above is not NEMA TYPE 4X. • When using the FB plastic enclosures in North America, be sure to use UL approved plastic cable glands. • Tighten cable glands to a torque of 3.0±0.3 N·m.* Insufficient tightening of the cable gland may degrade the waterproof

char acteristics.* Electric shock protection Class II is maintained only when a plastic

cable gland is used.

• Determine the cable gland for a multi-core cable according to the outside diameter of the cable sheath. • When wiring from the back of FB series, use the ø14 knock-out on the back of the enclosure. A cable gland cannot be installed to the ø14 knockout.

31


Instructions

NotesApplicable Wire Size • Determine the wire size in consideration of the applicable wire for switches/pilot lights and the applicable diameter of cables.

Wiring • Avoid foreign objects such as dust, liquid, and oil from enter-ing the switch while connecting a conduit or wiring.

• Do not twist or pull the cable of flexible conduit with excessive force. Otherwise, the wire, FB series, and switches/pilot lights may be damaged.

• Because the FB series is not provided with a PG terminal, bonding circuits cannot be interconnected.

Installation of switches/pilot lights on 30mm centers • When mounting HW/TW series con trol units on 30mm mounting centers (close mounting), make sure to use a barrier (optional: HW-VG1) to secure the insulation properties of the termi-nal. The barriers (HW-VG1) can be easily pressed into the side of the contact block.

Operation • Avoid any contact with oil or coolants. Otherwise, the enclosure may be damaged.

• Use the FB series for INDOOR applications only.

Contact Cover BoxSpecifications, applicable units, and wiring • Same as the standard enclosures.

Installing XW series to the FB1WR-111Z contact cover • Remove the contact block and the locking ring from the opera tor and check that the rubber gasket is in place. Insert the operator from panel front into the panel hole. Attach the rubber gasket and the base to the operator unit (place the rubber gas ket between the panel and the base) and tighten the locking ring using locking ring wrench MW9Z-T1. Recom-mended tightening torque: 2.0 N·m

• Attach the contact block to the operator. After wiring, attach the cover to the base using four cover mounting screws. Rec-ommended tightening torque: 1.3±0.1 N·m

• Use a nameplate if necessary.

• Determine the panel thickness by excluding the thickness of the base (2.0 mm) and accessories (if used) from the maxi-mum panel thickness for the switcs/pilot light.

Panel

NameplateBase

Cover

Contact Block

Rubber Gasket (supplied)

Locking Ring

Rubber Gasket

Operator

• Do not expose the cable to excessive force, otherwise fail-ure or damage may be caused. When mounting strength is needed, insert M4 tapping screws from the front of the panel (screw tightening depth: 8 to 10mm tapping screw hole: ø3.7mm)

• Determine the mounting hole centers referring to the dimen-sions of the plastic enclosures on page 28.

Mounting BracketHook Mounting • Attach the FB9Z-PK1 mounting bracket on the FB series with the supplied screws (two M4 tapping screws). Recommended tightening torque: 1.3±0.1 N·m

• Do not tighten the FB9Z-PK1 onto the FB series with exces-sive force. The tapping screw hole may be damaged and may not securely hold the enclosure.

• When using the FB9Z-PK1 as hook mounting brackets, make sure that vibrations or shocks do not cause the enclosure to fall off, and that the switch/pilot light operates properly.

• Make sure that the mounting strength is secured.

FB9Z-PK1

Two M4 Tapping Screw Holes

Two M4 Tapping Screws (supplied)

Frame Mounting • The FB9Z-PK1 can be used as frame mounting brackets by attaching two FB9Z-PK1 as shown below.

FB9Z-PK1

Two M4 TappingScrews (supplied)

Four M4 Tapping Screw Holes

• Attach the FB9Z-PK1 on the FB series with the supplied screws (two M4 tapping screws). Recommended tightening torque: 1.3±0.1 N·m.

• Do not tighten the FB9Z-PK1 onto the FB series with exces-sive force. The tapping screw hole may be damaged and may not securely hold the enclosure.

• Using two M6 screws, fasten the FB9Z-PK1 securely on the frame. Recommended tightening torque: 5.0±0.3 N·m

* M6 mounting screws and nuts are not supplied with the FB9Z-PK1. * The value of the recommended tightening torque for M6 screws has been

confirmed with a hexagon socket head screw. When other screws are used and tightened to a smaller torque, make sure that the screws do not become loose after mounting.

M6 Screw

Frame

FB9Z-PK1 Nut

• Do not expose the FB series to excessive force, otherwise fail ure or damage may be caused.

• Make sure that the mounting strength is secured in consider-ation of the operation of switch/pilot light.

30

Barrier(optional, HW-VG1)

32


Dimensions

7236

30

6.6 10

.554

6.5

132 10

R4

R2.5

R3.3L

76

AB

28

59.5 10

Mounting Hole

FB Series Enclosure

FB1 FB2 FB3

L 76 140 200

A 19 18.5 18.5

B 12.5 12 12

76M6 ScrewI36

CL D

28

I Adjustable range

59.5 10

FB Series Enclosure

FB1 FB2 FB3

L 76 140 200

C 93 156 216

D 114 177 237

Frame Mounting


FB9Z-PK1

Hook Mounting

DIN Rail AdapterInstalling the FB9Z-PK3 DIN Rail Adapter • To attach the FB9Z-PK3 on the FB series, position the positioning hole of the FB9Z-PK3 with the positioning boss in the enclosure using four M3 tapping screws (supplied) as shown in the figure below. Recommended tightening torque: 0.9±0.1 N·m • Do not tighten the FB9Z-PK3 onto the FB series with excessive force. The tapping screw hole may be damaged and may not securely hold the enclosure.

Installing the DIN Rail • To attach a DIN rail, use plain washers and spring washers on two M5 screws and tighten firmly. Recommended tightening torque: 2.0±0.1 N·m • DIN rail mounting screw (M5)Screw length: (spring washer thickness + plain washer thickness

+ DIN rail thickness) + 3 to 5 mmPositioning Boss

FB9Z-PK3

Positioning Hole

Two M5 Screws(including springwasher and plaingwasher)

Four M3 TappingScrews (supplied)

DIN Rail

33


• M5 screws, spring washers, and plain washers are not supplied. • The length of DIN rail must be within the effective internal dimen-sions. • Do not tighten the M5 screw onto the FB9Z-PK3 with excessive force. The screw hole may be damaged and may not securely hold the FB9Z-PK3.

M5 ScrewDIN Rail

Spring WasherPlain Washer

M5

Scr

ew L

engt

h

Sp

ring

Was

her

Thic

knes

s+

Pla

in W

ashe

r Th

ickn

ess

DIN

Rai

lTh

ickn

ess

Mounting Switches/Pilot Lights on DIN Rail • Refer to each instruction sheet.

Installing the Separate Mounting Transformer • After attaching the FB9Z-PK3 on the FB series, attach the sepa-rate mounting transformer on the FB9Z-PK3, using plain washers and spring washers on two M3 screws as shown in the figure below. Recommended tightening torque: 0.5 to 0.8 N·m

Two M3 Screws

Two Spring Washers

Two Plain Washers

Separate MountingTransformer

FB9Z-PK3

• Separate mounting transformer mounting screw (M3) Screw Length: (Spring washer thickness) + (Plain washer thick-ness) + 7 to 10 mm • M3 screws, spring washers, and plain washers are not supplied. • Do not tighten the screw with excessive force. The screw hole and the separate mounting transformer may be damaged.

Spring Washer

Plain Washer

FB9Z-PK3

M3Screw

Separate MountingTransformer

M3

Scr

ew L

engt

h

Sp

ring

Was

her

Thic

knes

s+

Pla

in W

ashe

r Th

ickn

ess

FB9Z-PK3 Dimensions

66

40

292212.5

2

2-M3

2-M5

45

B

46

A

Inside Dimensions of FB Series Enclosure

FB9Z-PK3 Installation Positions

FB Series Enclosure

FB2 FB3

A 50 112.5

B — 37.5

See internal dimensions on page 28.


Other Precautions • Rated current of terminal blocks depends on operating conditions such as wire type, number of bundle wires, and ambient tempera-ture. Check the specifications of terminal blocks carefully, and use terminal blocks within the specification values. Otherwise electric shock or fire hazard may be caused. • FB series is rated as Class II protection against electric shock (no reliance on installation protective measures, according to IEC 61140). When using a blank front enclosure as a junction box and grounding is necessary, provide appropriate grounding, for exam-ple installing a grounding terminal block inside the enclosure. • For wiring, refer to the instructions of the FB series enclosures and switches/pilot lights used.

34

IP65 Waterproof Stainless Steel Control StationsHigh Corrosion and Weather Resistant The AGS series control stations are designed for mounting various types of switches/pilot lights in various combinations. Standard control stations are available with predetermined specifications of cable lead-in holes and switches/pilot lights mounted (contact configurations, voltage, button colors, and nameplates). • Wide variety of combinations of switches/pilot lights are pos-sible. Select from a wide variety of ø30 series switches/pilot lights. • Buff finish available upon request.

SpecificationsDegree of Protection (Note 1)

IP65 (IEC60529)Key selector switch: Splash-proof IP54

Material (Box) Stainless steel plate (thickness 1 mm)

Coating Color(Melamine coating)

Yellow semi-gloss (Munsell 5Y7/1)1 column: Outside only2 or 3 column: Both inside and outside


Insulation Resistance 5 MΩ minimum (500V DC megger)Dielectric Strength (Note 2)




Enclosure Style1 to 5 holes × 1 column, 3 to 5 holes × 2 or 3 columnsWall mount/Pole mount


Reducer bushing (Gland hub also available)G1 (28 mm)1 to 3 holes × 1 column: G3/4 (22 mm)


IDEC ø30 mm series, AM ammeter(except enclosed type units)

Note 1: Degree of protection depends on the switches/pilot lights mounted on the enclosure. When IP65 switches/pilot lights are mounted, the entire control station has IP65 characteristics. (See page 2)

Note 2: AM ammeter: 2000V AC, 1 minute

Switch/Pilot Light Mounting HolesThe holes for mounting switches/pilot lights are 30.5 mm in diam-eter with an anti-rotation notch. Mounting centers are 50 mm.

Lead-in Fittings (Wall Mount)A reducer bushing made of brass is supplied for connecting a steel conduit to lead in cables.

1 column × 1 to 3 holes: With one G3/4 for 22 mm conduit1 column × 4 or 5 holes: With one G1 for 28 mm conduit2 columns × 2 or 3 holes: With two G3/4 for 22 mm conduit2 columns × 4 or 5 holes: With two G1 for 28 mm conduit3 columns × 2 or 3 holes: With three G3/4 for 22 mm conduit3 columns × 4 or 5 holes: With three G1 for 28 mm conduitNote: Mounting other than standard (e.g. one bushing for 2 column, one

or two bushings for 3 column) Is not available. In this case, a plug is supplied.

HNG gland hubs for lead in cables are also available.

Stand Pole (Pole Mount)The pole is made of carbon steel pipe, and the base is made of cast iron. The coating color is the same as the enclosure, yellow (semi-gloss).

Pole

Base


Reducer Bushing

Enclosure

Switch/ Pilot Light

AGS Series Control Stations

35


Control Stations with Switches/Pilot LightsThe standard control stations are available with selected combi-nations of switches/pilot lights as listed below. For the dimensions and mounting centers, see the figures on page 37.

Switches/Pilot Lights Mounted on Standard Control StationsSwitch/Pilot Light Part No. Specifications

PushbuttonPB

ABN110 * Flush, 1NO

ABN101 * Flush, 1NC

ABN111 * Flush, 1NO-1NC

ABN311R ø40 mushroom, 1NO-1NC

ATN420 Toggle lever, 2NO

HN1E-BV411R Emergency stop, 1NO-1NC




Selector SwitchSS

ASN311 Knob, 2-position, 1NO-1NC

ASN111 Knob, 3-position, 1NO-1NC

ASN3K11 Key, 2-position, 1NO-1NC

MeterA

AM ammeter(See page 38)

Specify capacity (Part No.)Coating color of the meter bezel: N1.5 (polish)


1-column Package Quantity: 1Control Station Mounted Switches/Pilot Lights

Style Part No. Symbol Part No. NA NameplateLegend

Wal

l Mou

nt /

1 ho

le

AGS1101M PB ABN110 ON

AGS1102M PB ABN311R OFF

AGS1103M PL APN118R Without nameplate

AGS1105M SS ASN311 HAND-AUTO

AGS1106M SS ASN111 HAND-OFF-AUTO

AGS1107M * SS ASN3K11 OFF-ON

AGS1108M PB ATN420 Without nameplateON-OFF on bezel

AGS1111M PBHN1E-BV411R

EMERGENCY STOP

Pol

e M

ount

/ 1

hole

AGS1101SM PB ABN110 ON

AGS1102SM PB ABN311R OFF

AGS1111SM PBHN1E-BV411R

EMERGENCY STOP

Wal

l Mou

nt /

2 ho

les

AGS2101MPB

PBABN110ABN101

ONOFF

AGS2102MPB

PBABN111ABN111

ONOFF

AGS2103MPL


AGS2104MPL





Wal

l Mou

nt /

2 ho

les

AGS2105MPL

PBAPN118RABN111


AGS2106MPL

PBAPN128RABN111


AGS2107MPL

SSAPN118RASN311


AGS2108MPL

SSAPN128RASN311


AGS2110M *PL

SSAPN128RASN3K11


AGS2113MPB

PBABN110ABN311R

ONOFF

AGS2115MPL

PBAPN128RATN420


Pol

e M

ount

/ 2

hole

s AGS2101SMPB

PBABN110ABN101

ONOFF

AGS2107SMPL

SSAPN118RASN311


Wal

l Mou

nt /

3 ho

les

AGS3102MPL

PB

PB

APN118RABN110ABN101


AGS3103MPL

PB

PB

APN128RABN110ABN101


AGS3104MPB

PB

SS

ABN111ABN111ASN311

ONOFF

HAND-AUTO

AGS3105MPL

PL

PL


Without nameplate

AGS3106MPL

PL

PL


Without nameplate

Pol

e M

ount

/ 3

hole

s

AGS3102SMPL

PB

PB

APN118RABN110ABN101


AGS3104SMPB

PB

SS

ABN111ABN111ASN311

ONOFF

HAND-AUTO


36




Wall•Pole/4

holes

Wall MountAGS4101

PL

PL

PB

PB



ONOFFPole Mount

AGS4101S

Wall MountAGSM4101 A

PB

PB

(Note )AM ammeter

ABN111ABN111

Without nameplate

ONOFFPole Mount

AGSM4101S

Wall MountAGS4102 PL

PB

PB

SS



HAND-AUTOPole MountAGS4102S

Wall•Pole/5

holes

Wall MountAGS5101

PL

PL

PB

PB

SS



ONOFF



PL

PB

PB

(Note)AM ammeter

APN128RABN111ABN111

Without nameplate

Without nameplateONOFFPole Mount

AGSM5101S




Wall•Pole/3

holes

Wall MountAGS3801

PB

PB

SS

PB

PB

SS

ABN111ABN111ASN311

ONOFF


Wall MountAGS3802

PL

PB

PB

PL

PB

PB

APN128RABN111ABN111


AGS3802S

Wall•Pole/

4 ho

les


PL

PB

PB

PL

PL

PB

PB



ONOFFPole Mount

AGS4801S

Wall•Pole/5

holes

Wall MountAGS5801

PL

PL

PB

PB

SS

PL

PL

PB

PB

SS



ONOFF


Wall MountAGSM5801

APL

PB

PB

APL

PB

PB

(Note)AM ammeter

APN128RABN111ABN111

Without nameplate





Wall•Pole/3

holes

Wall MountAGS3901

PB

PB

SS

PB

PB

SS

PB

PB

SS

ABN111ABN111ASN311

ONOFF


Wall MountAGS3902

PL

PB

PB

PL

PB

PB

PL

PB

PB

APN128RABN111ABN111


AGS3902S

Wall•Pole/

4 ho

les


PL

PB

PB

PL

PL

PB

PB

PL

PL

PB

PB



ONOFFPole Mount

AGS4901S

Wall•Pole/5

holes

Wall MountAGS5901

PL

PL

PB

PB

SS

PL

PL

PB

PB

SS

PL

PL

PB

PB

SS



ONOFF



PL

PB

PB

APL

PB

PB

APL

PB

PB

(Note)AM ammeter

APN128RABN111ABN111

Without nameplate


AGSM5901S


Ordering InformationWhen ordering control stations with switches/pilot lights:Specify the Part No. of the control station.When ordering enclosures without switches/pilot lights, specify the following items.1. Part No. of the enclosure2. Part No. and specifications of the switches/pilot lights to

be mounted (lens color, button color, etc.)3. Nameplate4. Lead-in fitting

Only when ordering the gland hub for leading in cables, specify Part No. and the cable outside diameter (R).


Ordering ExamplePart No. of Enclosure AGS


APN128RAPN126GABN210B, with NA-1ABN201R, with NA-2ASN311, with NA-32

Note: Any ø30 mm series switches/pilot lights are select-able. Take into consideration the degree of protection of the switch/pilot light and the effective depth of the enclosure.

37



Style 1 column × 1 or 2 holes 1 column × 3 holes 1 column × 4 or 5 holes

Part No.Coating AGS210M AGS211M AGS212M AGS310M AGS311M AGS411 AGS510 AGS511Buffing AGS210M-BUFF AGS211M-BUFF AGS212M-BUFF AGS310M-BUFF AGS311M-BUFF AGS411-BUFF AGS510-BUFF AGS511-BUFF

Shape

50

50

50 50

Weight (Approx.) 1.2 kg 1.6 kg 2.4 kgStyle 2 columns × 3 holes 2 columns × 5 holes 3 columns × 3 holes 3 columns × 5 holes

Part No.Coated AGS380 AGS381 AGS580 AGS581 AGS390 AGS391 AGS590 AGS591

Buff AGS380-BUFF AGS381-BUFF AGS580-BUFF AGS581-BUFF AGS390-BUFF AGS391-BUFF AGS590-BUFF AGS591-BUFF

Shape

7050

70

50

140 50

140 50

Weight (Approx.) 3.8 kg 4.6 kg 4.8 kg 6.5 kg•Switch/Pilot Light Mounting Holes

31.7 4.5

ø30.5


ø65.5

•Effective Depth inside the Enclosure(From the lid surface to the inside bottom)

* AGS210, 310: 104* AGS210M, 310M: 104* AGS510: 105

(1-column)

1104

(2- or 3-column)

1105


1 hole 2 holes 3 holes 4/5 holes

H 1320 1370 1500

Weight (Approx.)

Wall Mount 1.2 kg 1.6 kg 2.4 kg

Pole Mount 6.8 kg 7.2 kg 8.0 kg

2-, 3-, 4- or 5-hole × 2 columns

36.5

35B

106

70

220230

210

BA

106 2

35

36.5

300310320

70 70

A

2

(Lead in position)

3–G M4 groundingterminal

M4 groundingterminal

2–G

(Lead in position)

4-ø10Mountinghole

4-ø10Mountinghole

2-column 3-column2 holes 3 holes 4 holes 5 holes 2 holes 3 holes 4 holes 5 holes

A 250 350 50 350B 180 280 180 280H 1400 1500 1400 1500G 3/4 (22 mm) 1 (28 mm) 3/4 (22 mm) 1 (28 mm)

Weight (Approx.)

Wall Mount 3.8 kg 4.6 kg 4.8 kg 6.5 kgPole Mount 9.3 kg 10.4 kg 10.6 kg 12.2 kg


H

ø200

ø230

10

M6 Grounding terminal

4-ø14 mounting hole

ø200

H

ø230

10

M6 Grounding terminal

4-ø14 mounting hole

1- or 2-hole × 1 column

35

115

110

95

106 1.5

100

142

170

936

G3/4M4 Grounding terminal

4-M5×12(W/SW sems)

Hinge

4-ø7(Mounting hole)

3-hole × 1 column 4- or 5-hole × 1 column

919

2

15022

0

36

1.5106

35

95110115

G3/4

4-ø7(Mounting hole)

Hinge 4-M5×12

(W/SW sems)M4 Grounding terminal

4-ø7Mounting

hole

M4

Grounding terminal

G1(28mm)

95

115 1.5106

350

36

250

50110

2-, 3-, 4- or 5-hole × 3 columns

38

AC AmmeterClass 2.5, IP65/jetproof AC ammeter

• Double expanded scale • For measuring higher than 10A, use a current transformer. • Can be used with AGA/AGS control stations.

Package quantity: 1

Appearance Capacity Part No. Dimensions (mm)

5A AM21B

M6 screw

M65 P1.5

54 27

81

ø74

Panel thickness: 18 maximum

ø65.5

Panel cut-out

10A AM22B

15A AM23B

30/5A AM24CB

60/5A AM25CB

100/5A AM26CB

150/5A AM27CB

200/5A AM28CB

300/5A AM29CB

/5A AM2CB

Specifications

Degree of Protection IP65 (IEC 60529), jetproof(when installed on IP65 control station)

Housing color Munsell N1.5 (melamine gloss coating)

Insulation Resistance 10MΩ minimum (500V DC megger)

Dielectric Strength 1000V AC, 1 minute (between live and dead parts)

Operating Temperature –25 to +50°C (no freezing)

Operating Humidity 45 to 85% (no condensation)

Instructions1. For measuring higher than 10A, use a current transformer.2. The ammeter cover can be removed easily to set the pointer to

zero.

Ordering InformationSpecify the Part No.When the capacity other than listed in the above table is required, specify the current as shown below.

When 50A is required:AM2C50AB

39

Lead-in FittingsEntrance Hub (For Connecting Conduit)

Made of aluminum alloy die-cast (supplied with a locking nut)

HN

SW2 SW1

A DBC

M N

FEL

SW2 SW1

A DBCM N

FELHNA

Made of cast iron (supplied with a locking nut and a bushing)

Package Quantity: 1

Material Part No. Applicable Conduit

Thread Size Outside Dimensions (mm)A (male) B (female) C D E F L M N SW1 SW2

AluminumHNA22 22 mm G3/4 G3/4 18 32 15 31 46 7 18 32 33HNA33 28 mm G1 G1 23 38 16 35 51 7 23 38 41

Iron

HN21 16 mm G3/4 G1/2 13 26 23 27 50 9 21 26 33HN22 22 mm G3/4 G3/4 18 32 23 36 59 9 22 32 33HN31 16 mm G1 G1/2 13 26 23 23 46 6 21 26 41HN32 22 mm G1 G3/4 18 32 23 30 53 6 22 32 41HN33 28 mm G1 G1 23 38 23 41 64 6 25 38 41

Gland Hub (For Lead in Cable)

Made of aluminum alloy die-cast (supplied with a locking nut)

HNAG

SW2 SW3SW1

A DC

M

E FL

Made of cast iron (supplied with a locking nut and a bushing)

HNG

SW2 SW1 SW3

A C

M

E

D

FL

Package Quantity: 1

Material Part No. Applicable Cable Diameter (R)Thread

Size Outside Dimensions (mm)

A C D E F L M SW1 SW2 SW3

Die-cast aluminum

HNAG22R * 13, 15, 17The tolerance of cable diameter is +0 to -2 mm(Example)When R = 15, the applicable cable outside diameter is ø13 to 15 mm.

G3/4 18 32 15 47 62 7 32 33 29HNAG33R * 18, 20, 22 G1 23 38 16 53 69 7 38 41 35

Cast iron

HNG21R * 8, 10, 12 G3/4 13 26 23 39 62 9 26 33 23HNG22R * 13, 15, 17 G3/4 18 32 23 48 71 9 32 33 29HNG31R * 8, 10, 12 G1 13 26 23 35 58 6 26 41 23HNG32R * 13, 15, 17 G1 18 32 23 42 65 6 32 41 29HNG33R * 18, 20, 22 G1 23 38 23 54 77 6 38 41 35

SW1: Hub size across flatsSW2: Locking nut size across flatsSW3: Gland size across flats

SW1: Hub size across flatsSW2: Locking nut size across flats

Note: Standard coating color: Yellow semi-gloss (melamine coating)

Note 1: Specify an applicable cable diameter code in place of *.Note 2: Standard coating color: Yellow semi-gloss (melamine coating) Note 3: Material of gland: Brass (nickel-plated surface)Note 4: When ordering, specify the Part No.

For example, when ordering the HNG21 with an applicable cable diameter of ø10, specify HNG21R10.

Control Station Accessories

NameplatesKGNW/AGAW (For ø 22 TW Series) When ordering, specify the Ordering No.

Name & Shape

Specifications Part No. Ordering No. Package Quantity DescriptionLegend

NWA

OFF

29

20

Without

AluminumThickness 0.8 mm

NWA-0NWA-0 1

· Black backgroundNWA-0PN10 10

With NWA-*NWA-* 1

· White letters on black backgroundNWA-*PN10 10

NWAQ

OFF

29

2114

.5

Without


NWAQ-0NWAQ-0 1

· Black backgroundNWAQ-0PN10 10

With NWAQ-*NWAQ-* 1

· White letters on black backgroundNWAQ-*PN10 10

NWAS45

45

Without AluminumThickness 0.8 mm NWAS-0

NWAS-0 1

· Black background

NWAS-0PN10 10

• Specify a legend code in place of * in the Ordering No.

KGN/AGA/AGS (For ø30 Series) When ordering, specify the Ordering No.

Name & Shape

Specifications Part No. Ordering No. Package Quantity DescriptionLegend

NA

ø30.5

24.5

40

R17.5

Without


NA-0NA-0 1

· Black background· White letters on black background

NA-0PN10 10

With NA-*NA-* 1

NA-*PN10 10

• Specify a legend code in place of * in the Ordering No.

Legend on NameplateCode Legend

1 ON2 OFF3 START4 STOP31 OFF−ON35 HAND−AUTO53 HAND−OFF−AUTO

Material of Nameplates for Switches/Pilot LightsIn addition to the nameplates made of aluminum, name-plates made of plastic are also available.

Nameplates for Various UsesIn addition to the nameplates for switches/pilot lights, nameplates for various uses made of plastic or stainless steel are also available.

Control Station Accessories

IDEC CORPORATION (USA)1175 Elko Drive, Sunnyvale, CA 94089-2209, USATel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246E-mail: [email protected]

IDEC CANADA LIMITED3155 Pepper Mill Court, Unit 4Mississauga, Ontario, L5L 4X7, CanadaTel: +1-905-890-8561, Toll Free: (800) 262-IDEC (4332) Fax: +1-905-890-8562E-mail: [email protected]

IDEC AUSTRALIA PTY. LTD.Unit 17, 104 Ferntree Gully Road,Oakleigh, Victoria 3166, AustraliaTel: +61-3-8523-5900, Toll Free: 1800-68-4332Fax: +61-3-8523-5999E-mail: [email protected]

IDEC ELECTRONICS LIMITEDUnit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UKTel: +44-1256-321000, Fax: +44-1256-327755E-mail: [email protected]

6-64, Nishi-Miyahara 2-Chome, Yodogawa-ku, Osaka 532-0004, JapanTel: +81-6-6398-2527, Fax: +81-6-6398-2547E-mail: [email protected]

Speci�cations and other descriptions in this brochure are subject to change without notice.

Cat. No. EP1466-2 AUGUST 2014 PRINTED IN SINGAPORE

IDEC ELEKTROTECHNIK GmbHWendenstrasse 331, 20537 Hamburg, GermanyTel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24E-mail: [email protected]

IDEC (SHANGHAI) CORPORATIONRoom 701-702 Chong Hing Finance Center, No. 288 Nanjing Road West, Shanghai 200003, PRCTel: +86-21-6135-1515 Fax: +86-21-6135-6225 / +86-21-6135-6226E-mail: [email protected]

IDEC (BEIJING) CORPORATIONRoom 211B, Tower B, The Grand Paci�c Building, 8A Guanghua Road, Chaoyang District, Beijing 100026, PRCTel: +86-10-6581-6131, Fax: +86-10-6581-5119

IDEC (SHENZHEN) CORPORATIONUnit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRCTel: +86-755-8356-2977, Fax: +86-755-8356-2944

IDEC IZUMI (H.K.) CO., LTD.Unit G & H, 26/F., MG Tower,No. 133 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong Tel: +852-2803-8989, Fax: +852-2565-0171E-mail: [email protected]

IDEC TAIWAN CORPORATION8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih District, 22101 New Taipei City, Taiwan Tel: +886-2-2698-3929, Fax: +886-2-2698-3931E-mail: [email protected]

IDEC IZUMI ASIA PTE. LTD.No. 31, Tannery Lane #05-01,HB Centre 2, Singapore 347788Tel: +65-6746-1155, Fax: +65-6844-5995E-mail: [email protected]

IDEC ASIA (THAILAND) CO.,LTD.20th Fl., Sorachai Bldg., No.23/78,Soi Sukhumvit 63, Sukhumvit Rd.,Klongton-nua, Wattana, Bangkok 10110Tel: +662-392-9765, Fax: +662-392-9768E-mail: [email protected]

Control box-idec -

Education

Transcript of Control box-idec -