CONTRACT SERIES TWO...2020/06/05 · F4115 HEM BAR 3.97in 101mm 3.75in 95mm 2.76in 70mm Max Roll...
Transcript of CONTRACT SERIES TWO...2020/06/05 · F4115 HEM BAR 3.97in 101mm 3.75in 95mm 2.76in 70mm Max Roll...
rolleaseacmedacontract.com | [email protected]
white silver black
Match this solution with any of our sunscreen, blockout or high performance fabrics for a complete finished solution. See our document library for comprehensive information including HPD, LEED & NRC specifications.HPDLEEDNRCLow Voc
The precision engineered Rollease Acmeda Contract Series Two is the culmination of 40 years of engineering experience offering the newest technology with best in class aesthetics and industry leading features. The CS2 Medium Fascia system, with a max width of 120" (based on a 120" drop) up to 92 Sq.Ft. before linking options with the ability to link multiple panels at angles up to 90°. The CS2 Medium Fascia system utilizes our P95 Fascia and has the ability to be a “reverse roll fascia”, enabling you to be able to maneuver the shade forward to avoid window and door hardware when necessary. Also, it can be a “fabric covered valance fascia”, enhancing the design of the of the space. This precision engineered system, integrates a powerful, yet quiet motor, directly in the tubing of the roller which is powered through a plug-in transformer or hardwired by an EC with connector plug. The sleek, compact form with consistent bracket, and OD tube diameter fosters a clean, consistent look across of all possible shading sizes in its range.
Features:
CONTRACT SERIES TWOMedium Fascia Roller Shade12v Low Voltage / Solar / Li- Ion Motorized Control
FINISH COLORS
MOTOR OPTIONS
Automate Pulse Hub [Smart Phone Control]
Automate Solar Charger[energy efficient]
Automate ARC R pepeater[Extends the ARC signal]]
DC Power Panel[Provides power for 18 DC ARC motors]
ARC Relay Module[Smart System Interface]
AutAutomatomatee Wall Switches[[Hand helHand held or wall mountd or wall mounts]s]
• With a max width of 120" (based on a 120" drop) up to 92 SqFt. before linking options.
• Linking options include in-line coupling.• Industry leading narrowest equal light gap of 1/2" per side.• Automate line of low voltage (12V) motors from 2 NM to 10 NM for large
applications with ultra-quiet operation and ARC bi-directional communication. • Optional solar panel for environmentally forward, energy efficient constant system
charging. • Self-locating installation feature with 10mm idler extension (1mm increments)• Fabric Spline feature provides positive attachment of fabric to tube.• Accepts standard and reverse roll applications
0.51in 0.71in 0.55in
SCHEMATIC
FRONT & SIDE VIEW
SYSTEM UPGRADES
BOTTOM RAIL OPTIONS
For more information about our Upgrade solutions, see our UPGRADE SPECIFICATION sheets.
D30 SILENT WEIGHT BAR
INTERNAL HEM BAR
0.52in13mm
1.14in29mm 1.28in
33mm
1.50in38mm
0.21in5mm
0.59in15mm
1.63in41mm
2.04in52mm
F4115HEM BAR
3.97in101mm
3.75in95mm
2.76in70mm
Max Roll
SPRING ASSIST
FABRIC COVER
PELMET 95
SPLINES
SPRING LOADED BRACKET
BRACKET
FABRICWEIGHT BAR
WEIGHT BAR END CAP
CHAIN TENSIONER
CLUTCH
WEIGHT BAR BUBBLE SEAL WEIGHT BAR BRUSH
TUBE
IDLER
BRACKET COVER
Edge Side Channels[for improved light blockout]
Internal Wire Guide[supporting complex shading systems]
L & I Clips[for hidden recess mounts]
Fabric Spline System[secure attachment of fabric on a roller shade]
5” Pocket[for hidden recess mounts]