Brian Droessler Business Development, Continental Automotive Systems
Continental Automotive GmbH-Template - iConnect · Continental Automotive GmbH-Template Continental...
Transcript of Continental Automotive GmbH-Template - iConnect · Continental Automotive GmbH-Template Continental...
Generated by GEFEG.FX
Message Implementation Guideline
Continental Automotive GmbH-Template
based on
DELFORDelivery schedule message
UN D.04A S3
Version: JAI 1.1Variant: 2009 ContiIssue date: 01.03.2010Author: Continental
Continental Automotive GmbH-Template
Structure / Table of Contents
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 2 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
Content
UNA C 1 Service string advice
UNA:+.? '
UNB M 1 Interchange header
UNB+UNOC:3+OD012345:59:123+987654321:1:X+071205:1446+144659++++++1'
UNH M 1 Message header
UNH+123456+DELFOR:D:04A:UN:GA0511'
BGM M 1 Beginning of message
BGM+241:::text+231234:02:A+5'
DTM R 1 Document Issue Date
DTM+137:20040523:102'
DTM O 1 N Calculation Date
DTM+257:20040523:102'
DTM O 1 Effective From Date
DTM+158:20040101:102'
DTM O 1 Effective To Date
DTM+159:20041231:102'
DTM O 1 N Confirmation Date
DTM+55:20040101:102'
DTM O 1 N Release Frequency Period
DTM+264::803'
DTM O 1 Validity Start Date
DTM+157:20040101:102'
DTM O 1 Expiry Date
DTM+36:20040101:102'
DTM O 1 N Rate/Price Date
DTM+267:20040101:102'
DTM O 1 N Payment Instruction Date
DTM+307:20040101:102'
DTM O 1 N Instructions original execution date
DTM+540:20040303:102'
FTX O 5 N Information Text
FTX+AAI+++Legal Notice::::X+DE'
SG1 O 99 R 1 Blanket order number
RFF M 1 Reference
RFF+BO:X:X'
DTM O 1 N Referenced document's date
DTM+171:X:102'
SG1 O 99 1 Previous delivery instruction number
RFF M 1 Reference
RFF+AIF:X:X'
DTM O 1 N Referenced document's date
DTM+171:X:102'
SG1 O 99 N 1 Event reference number
RFF M 1 Event reference number
RFF+AIV:X:X'
SG1 O 99 N 1 Buyer VAT registration number
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 3 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
Content
RFF M 1 Reference
RFF+VA:X'
SG1 O 99 N 1 Delivery schedule number
RFF M 1 Delivery schedule number
RFF+AAN:00283'
DTM O 2 1 Referenced document's date
DTM+171:20040528:102'
SG2 R 1 Buyer
NAD M 1 Buyer's Name and Address
NAD+BY+88012::92+X::::X+OEM INC:X+Industry Road 13:X+Smalltown++12345+DE'
SG4 O 1 Delivery Contact
CTA M 1 Delivery Contact
CTA+DL+ACCT'
COM O 5 Communication contact
COM+0123456789012:TE'
SG4 O 1 Scheduling contact
CTA M 1 Scheduling Contact
CTA+SC+:Scheduling'
COM O 5 Communication contact
COM+0123456789012:TE'
SG2 R 1 Seller
NAD M 1 Seller's Name and Address
NAD+SU+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
SG2 O 1 O Ship From
NAD M 1 Ship From's Name and Address
NAD+SF+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
SG6 R 9999 Ship-to level
GEI M 1 Processing information
GEI+3+37'
SG7 O 1 R Ship-to
NAD M 1 Ship-to
NAD+ST+082864711::92'
LOC O 1 Place of discharge
LOC+11+DOCK 5::92:X'
LOC O 4 Place of delivery / Internal place of destination
LOC+18+DOCK 5::92:X'
FTX O 5 N General Information Text
FTX+AAI+++Werksurlaub vom .. bis ..:X:X:X:X+AA'
SG12 R 9999 1 Scheduled Article Details
LIN M 1 Line item
LIN+1+1+PN-32212:IN'
PIA O 1 Additional product id
PIA+1+C2:VN'
PIA O 1 Additional product id
PIA+1+C2:EC'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 4 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
Content
PIA O 1 N Additional product id
PIA+1+C2:SA+xx:VN+X:MF+X:UA+X:GB'
PIA O 1 N Additional product id
PIA+1+X:TG+X:AA+X:CL+X:EC+X:DR'
IMD O 10 1 Item short description
IMD+F+4::10+01::10:X:X:AA'
MEA O 4 N Measurements
MEA+PD+TH+05:4'
ALI O 1 N Country of origin
ALI+GB'
LOC O 1 N Place of discharge
LOC+11+:::X+:::X'
LOC O 6 N Internal place of destination
LOC+7+DOCK 5::92:OUTBACK'
LOC O 1 N Place of pick-up
LOC+9+:::X'
FTX O 5 N General information text
FTX+AAI+++X:X+DE'
SG14 O 1 N Article related contact information
CTA M 1 Contact information
CTA+SC+X:X'
COM O 5 Communication contact
COM+X:TE'
SG16 O 2 Delivery balance
QTY M 1 Delivery balance quantity
QTY+83:5000:05'
SG16 O 99 O 1 Cumulative quantity received
QTY M 1 Cumulative quantity received
QTY+70:100000:C62'
DTM O 2 O Cumulative quantity date(s)
DTM+51:20050101:102'
SG16 O 1 O 1 Received quantity
QTY M 1 Despatched and received quantities
QTY+48:10000:C62'
DTM O 2 Despatch and/or receipt date
DTM+310:20040528:102'
SG17 O 99 Despatch / receiving document reference
RFF M 1 Reference
RFF+AAU:12345'
DTM O 1 Referenced document's date
DTM+171:X:102'
SG16 O 99 N Despatched and received quantities
QTY M 1 Despatched and received quantities
QTY+12:10000:05'
DTM O 2 Despatch and/or receipt date
DTM+50:20040528:102'
SG17 O 99 Despatch / receiving document reference
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 5 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
Content
RFF M 1 Reference
RFF+AAK:12345:01'
DTM O 1 Referenced document's date
DTM+171:X:102'
SG18 D 999 O Scheduling data Firm
SCC M 1 Scheduling conditions
SCC+1'
SG19 R 999 Scheduled quantity
QTY M 1 Quantity
QTY+113:4500:C62'
DTM R 9 R Scheduled date(s)
DTM+2:20040610:102'
DTM R 9 N Scheduled date(s)
DTM+64:20040610:102'
SG19 O 999 N Cumulative quantity
QTY M 1 Quantity
QTY+3:10000:C62'
SG18 O 999 O Commitment for manufacturing and material
SCC M 1 Scheduling conditions
SCC+2'
SG19 R 999 Quantity to be delivered
QTY M 1 Quantity
QTY+113:4500:C62'
DTM R 9 Delivery date/time, requested
DTM+2:20040610:102'
DTM R 9 N Authorization date
DTM+160:20040610:102'
SG19 O 999 Latest cumulative quantity
QTY M 1 Quantity
QTY+74:10000:C62'
DTM R 9 Authorization date
DTM+160:20040610:102'
SG18 D 999 O Scheduling data Planning/forecast
SCC M 1 Scheduling conditions
SCC+4'
SG19 R 999 R Scheduled quantity
QTY M 1 Quantity
QTY+113:4500:C62'
DTM R 9 O Scheduled date(s)
DTM+2:20040610:102'
DTM R 9 O Delivery date time, last
DTM+63:20040610:102'
DTM R 9 O Delivery date/time, earliest
DTM+64:20040610:102'
DTM R 9 N Delivery date/time, expected
DTM+191:20040610:716'
SG19 O 999 N Cumulative quantity
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 6 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
Content
QTY M 1 Quantity
QTY+3:10000:C62'
UNT M 1 Message trailer
UNT+122+123456'
UNZ M 1 Interchange trailer
UNZ+1+144659'
Continental Automotive GmbH-Template
Branching Diagram of Used Segments/Groups
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 7 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
UNAC 1
1
UNBM 1
2
UNHM 1
3
BGMM 1
4
DTMR 1
5
DTMO 1
6
DTMO 1
7
DTMO 1
8
DTMO 1
9
1
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 8 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
1
DTMO 1
10
DTMO 1
11
DTMO 1
12
DTMO 1
13
DTMO 1
14
DTMO 1
15
FTXO 5
16
SG1O 99
RFFM 1
17
DTMO 1
18
2
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 9 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
2
SG1O 99
RFFM 1
19
DTMO 1
20
SG1O 99
RFFM 1
21
SG1O 99
RFFM 1
22
SG1O 99
RFFM 1
23
DTMO 2
24
SG2R 1
NADM 1
25
SG4O 1
CTAM 1
26
COMO 5
27
SG4O 1
CTAM 1
28
COMO 5
29
SG2R 1
NADM 1
30
SG2O 1
NADM 1
31
3
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 10 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
3
SG6R 9999
GEIM 1
32
SG7O 1
NADM 1
33
LOCO 1
34
LOCO 4
35
FTXO 5
36
SG12R 9999
LINM 1
37
PIAO 1
38
PIAO 1
39
PIAO 1
40
PIAO 1
41
5
4
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 11 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
4
IMDO 10
42
MEAO 4
43
ALIO 1
44
LOCO 1
45
LOCO 6
46
LOCO 1
47
FTXO 5
48
SG14O 1
CTAM 1
49
COMO 5
50
6
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 12 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
6 SG16O 2
QTYM 1
51
SG16O 99
QTYM 1
52
DTMO 2
53
SG16O 1
QTYM 1
54
DTMO 2
55
SG17O 99
RFFM 1
56
DTMO 1
57
SG16O 99
QTYM 1
58
DTMO 2
59
SG17O 99
RFFM 1
60
DTMO 1
61
SG18D 999
SCCM 1
62
SG19R 999
QTYM 1
63
DTMR 9
64
DTMR 9
65
8
7
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 13 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
7 SG19O 999
QTYM 1
66
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 14 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
8 SG18O 999
SCCM 1
67
SG19R 999
QTYM 1
68
DTMR 9
69
DTMR 9
70
SG19O 999
QTYM 1
71
DTMR 9
72
SG18D 999
SCCM 1
73
SG19R 999
QTYM 1
74
DTMR 9
75
DTMR 9
76
DTMR 9
77
DTMR 9
78
SG19O 999
QTYM 1
79
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 15 /1.1; 2009 ContiGenerated by GEFEG.FX
No = Consecutive segment number
No MaxOcc = Maximum occurrence of the segment/group
St MaxOcc St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional, D=Dependent, A=Advised, N=Not used
Tag Tag = Segment/Group Tag
5
UNTM 1
80
UNZM 1
81
Continental Automotive GmbH-Template
Segments
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 16 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
UNA C 1
Service string advice
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
UNA1 Component data elementseparator
M an1
UNA2 Data element separator M an1
UNA3 Decimal notation M an1
UNA4 Release indicator M an1
UNA5 Reserved for future use M an1
UNA6 Segment terminator M an1
Remark:
Example: UNA:+.? '
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 17 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
UNB M 1
Interchange header
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
S001 Syntax identifier M
0001 Syntax identifier M a4 UNOA UN/ECE level AUNOB UN/ECE level BUNOC UN/ECE-Zeichensatz CUNOX UN/ECE level X
0002 Syntax version number M n1 2 Version 23 Version 3
S002 Interchange sender M
0004 Sender identification M an..35 Unique ID of the sender in the data transmission network or system.
0007 Partner identification codequalifier
O an..4
0008 Address for reverse routing O an..14 Address of an application or internal system at sender's site to whichanswer messages should be routed.
S003 Interchange recipient M
0010 Recipient identification M an..35 Unique ID of the receiver in the data transmission network or system.
0007 Partner identification codequalifier
O an..4
0014 Routing address C an..14 Address of an application or internal system at recipient's site.
S004 Date/time of preparation M
0017 Date of preparation M n6 Format YYMMDD
0019 Time of preparation M n4 Format HHMM
0020 Interchange control reference M an..14 Unique ID of an interchange.
S005 Recipient's reference,password
N
0022 Recipient's reference/password N an..14 Not used
0025 Recipient's reference/passwordqualifier
N an2 Not used
0026 Application reference N an..14 Not used
0029 Processing priority code N a1 Not used
0031 Acknowledgement request N n1 Not used
0032 Communications agreement ID N an..35 Not used
0035 Test indicator O n1 Only to be used if the interchange is for test purposes. Omit this dataelement for valid interchanges.
1 Interchange is a test
Remark:
Example: UNB+UNOC:3+OD012345:59:123+987654321:1:X+071205:1446+144659++++++1'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 18 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
UNH M 1
Message header
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
0062 Message reference number M an..14 Message reference number should be unique for an agreed period oftime. (Eg. Calendar year, model year)
S009 Message identifier M
0065 Message type M an..6 DELFOR Delivery schedule message
0052 Message version number M an..3 D Draft version/UN/EDIFACT Directory
0054 Message release number M an..3 04A Release 2004 - A
0051 Controlling agency M an..2 UN UN/CEFACT
0057 Association assigned code R an..6 Identification of the subset release, assigned by the responsibleorganisation (Odette, joint automotive initiative forum).
0068 Common access reference N an..35 Not used
S010 Status of the transfer N
0070 Sequence of transfers N n..2 Not used
0073 First and last transfer N a1 Not used
Remark:
Example: UNH+123456+DELFOR:D:04A:UN:GA0511'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 19 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
BGM M 1
Beginning of message
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C002 Document/message name R
1001 Document name code R an..3 Code specifying the type or subtype of the business document.Use UN/EDIFACT code list 1001 and JAI code list JAI001
236 Lieferprog /VMI-flag241 Delivery schedule
Code 222 - message is used for a single delivery requirement and canbe seen as individual delivery instruction for that item. It's assumed thata standing purchase order exists.Code 224 - exceptional delivery instruction for immediate additionalrequirements. All other (previously sent) scheduling data remain valid.Code 236 - message contains only forecasting figuresCode 240 - message contains only firm instructionsCode 241 - message contains forecasting and firm figures (combinationof firm instructions and forecasting figures)Conti-Comment Code 241: classic Delivery schedule;Code 236: VMI-Delfor
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 StatusConti N
Code specifying the agency responsible for a code list.6 UN/ECE (United Nations - Economic Commission for
Europe)
1000 Document name O an..35 StatusConti N
Additional profile information concerning the delivery forecast /instruction
C106 Document/messageidentification
R
1004 Document identifier R an..35 Unique identifier of a document. Synonym: document number
1056 Version identifier O an..9 StatusConti N
Message version is used to indicate a version of each individualcompany's message specification, which is composed based on theglobal message.
1060 Revision identifier O an..6 StatusConti N
Document revision is used to indicate a revision of each individualcompany's message specification which is composed based on theglobal specification.
1225 Message function code O an..3 StatusConti N
Code indicating the function of the document.Use of code 4 - change is not recommended and also code 5 should berestricted to replacements due to technical reasons. Any change ininstruction content should be indicated at instruction level.
4343 Response type code N an..3 Not used
Remark:
Example: BGM+241:::text+231234:02:A+5'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 20 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM R 1
Document Issue Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 137 Document issue date time
2380 Date or time or period text R an..35 Date on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+137:20040523:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 21 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Calculation Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 257 Calculation date time
2380 Date or time or period text R an..35 Calculation date
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:The date the computer system has done the calculations for details contained in the message. It might be different from the message dateitself.Synonym: Process date
Example: DTM+257:20040523:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 22 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1
Effective From Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 158 Horizon start date
2380 Date or time or period text R an..35 Start date of a given period.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD
Remark:Start date of the schedule. Usually used in combination with the Effective To Date to form a forecast horizon. Synonym: Horizon Start Date
Example: DTM+158:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 23 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1
Effective To Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 159 Horizon end date
2380 Date or time or period text R an..35 End date of a given period.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD
Remark:End date of the schedule. Usually used in combination with the 'Effective From Date' to form a forecast horizon.
Example: DTM+159:20041231:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 24 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Confirmation Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 55 Confirmed date/time
2380 Date or time or period text R an..35 Order confirmation date: date when buyer's order has been confirmedby seller.
2379 Date or time or period formatcode
O an..3 6 CCYYMMB7 CCYYMMW
102 CCYYMMDD610 CCYYMM614 CCYYMMA616 CCYYWW
Remark:Order confirmation date: date when buyer's order has been confirmed by seller.
Example: DTM+55:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 25 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Release Frequency Period
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 264 Release frequency
2380 Date or time or period text N an..35 Not used
2379 Date or time or period formatcode
R an..3 Frequency of transmission of the delivery instructions.802 Month803 Week804 Day
Remark:Frequency of generating the schedule message.
Example: DTM+264::803'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 26 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1
Validity Start Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 157 Validity start date
2380 Date or time or period text R an..35 Start date of a given period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:Although the horizon may comprehend a longer period, the current message is to be considered valid only for a shorter period, delimitedby Validity start date and Expiry Date. Usually, this goes along with a release frequency. E.g. if the frequency is weekly, the validitiy startdate and expiry date shall denominate the one week period.
Example: DTM+157:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 27 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1
Expiry Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 36 Expiry date
2380 Date or time or period text R an..35 End date of a given period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:Although the horizon may comprehend a longer period, the current message is to be considered valid only for a shorter period, delimitedby Validity start date and Expiry Date. Usually, this goes along with a release frequency. E.g. if the frequency is weekly, the validitiy startdate and expiry date shall denominate the one week period.
Example: DTM+36:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 28 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Rate/Price Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 267 Rate/price date/time
2380 Date or time or period text R an..35 Date when the unit price was established.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:
Example: DTM+267:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 29 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Payment Instruction Date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 307 Payment instruction date/time
2380 Date or time or period text R an..35 Date when payment conditions have been agreed upon betweenbusiness partners.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:Date that the payment conditions were established.This information is required by Japanes law e.g. in delivery instruction documents.
Example: DTM+307:20040101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 30 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
DTM O 1 StatusCont
i N
Instructions original execution date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 540 Instruction's original execution date
2380 Date or time or period text R an..35 Instruction's original execution date.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:May be used when the message is re-sent because of any trouble with the original message.
Example: DTM+540:20040303:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 31 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
FTX O 5 StatusCont
i N
Information Text
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4451 Text subject code qualifier M an..3 AAI General information
4453 Free text function code N an..3 Not used
C107 Text reference N
4441 Free text description code N an..17 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C108 Text literal R
4440 Free text M an..256 A line of plain, non-structured text information.
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
3453 Language name code O an..3 Code specifying the language name. Use ISO 639-1988.
4447 Free text format code N an..3 Not used
Remark:General information text
Example: FTX+AAI+++Legal Notice::::X+DE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 32 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i R
Blanket order number
RFF M 1
Reference
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 Type of reference, codedBO Blanket order number
1154 Reference identifier R an..17 Unique identifier of a document. Synonym: document number orreference number
1156 Document line identifier O an..6 StatusConti N
Sequential number assigned by the sender to identify a line item withina message or document.
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:
Example: RFF+BO:X:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 33 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i R
Blanket order number
DTM O 1 StatusCont
i N
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 171 Reference date/time
2380 Date or time or period text R an..35 Date on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+171:X:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 34 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 1
Previous delivery instruction number
RFF M 1
ReferenceNameConti Previous delivery instruction number
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 Type of reference, codedAIF Previous delivery instruction number
1154 Reference identifier R an..17 Unique identifier of a document. Synonym: document number orreference number
1156 Document line identifier O an..6 StatusConti N
Sequential number assigned by the sender to identify a line item withina message or document.
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:
Example: RFF+AIF:X:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 35 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 1
Previous delivery instruction number
DTM O 1 StatusCont
i N
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 171 Reference date/time
2380 Date or time or period text R an..35 Date on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD
Remark:
Example: DTM+171:X:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 36 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i N
Event reference number
RFF M 1
Event reference number
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 Type of reference, codedAIV Event reference number
1156 Document line identifier O an..6 StatusConti N
Sequential number assigned by the sender to identify a line item withina message or document.
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:
Example: RFF+AIV::X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 37 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i N
Buyer VAT registration number
RFF M 1
ReferenceNameConti Buyer VAT registration number
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 Type of reference, codedVA VAT registration number
1154 Reference identifier R an..17 Unique identifier of a document. Synonym: document number orreference number
1156 Document line identifier N an..6 Not used
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:
Example: RFF+VA:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 38 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i N
Delivery schedule number
RFF M 1
Delivery schedule number
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 AAN Delivery schedule number
1154 Reference identifier R an..17 Unique identifier of a document. Synonym: document number
1156 Document line identifier N an..6 Not used
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:
Example: RFF+AAN:00283'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 39 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG1 O 99 Statu 1sCont
i N
Delivery schedule number
DTM O 2 1
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
2380 Date or time or period text R an..35 Date on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+:20040528:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 40 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG2 R 1
Buyer
NAD M 1
Buyer's Name and Address
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3035 Party function code qualifier M an..3 BY BuyerSome companies refer to the buyer as the material release issuer. Bothterms are used as synonyms in the DELFOR.
C082 Party identification details R
3039 Party identifier M an..35 Unique identification of a party by an ID.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
R an..3 Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
C058 Name and address O
3124 Name and address description M an..35 A text line containing non-structured address information.
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
C080 Party name O
3036 Party name M an..35 Single text line for specification of a name
3036 Party name O an..35 see 3036#1
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3045 Party name format code N an..3 Not used
C059 Street O
3042 Street and number or postoffice box identifier
O an..35 The name that identifies the location of a house or building: usuallywithin a street as part of an address.
3042 Street and number or postoffice box identifier
O an..35 see 3042#1
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3164 City name O an..35 The name of the city, town, or village of this address.
C819 Country sub-entity details O
3229 Country sub-entity name code R an..9 State or region within a country. The use of UN LoCodes isrecommended.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3228 Country sub-entity name N an..70 Not used
3251 Postal identification code O an..17 The identifier for one or more properties according to the postal serviceof that country; a group of letters and/or numbers added to the postaladdress to assist in the sorting of mail.
3207 Country name code O an..3 Provides the country part of an address using a code. Use ISO3166 two alpha code.
Remark:Party to whom merchandise and/or service is sold.
Example: NAD+BY+88012::92+X::::X+OEM INC:X+Industry Road 13:X+Smalltown++12345+DE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 41 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG4 O 1
Delivery Contact
CTA M 1
Delivery Contact
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3139 Contact function code R an..3 DL Delivery contact
C056 Information Contact Details R
3413 Department or employee namecode
R an..17 Identifies the department or employee by a unique identifier other thantheir name when given as a contact.
3412 Department or employee name N an..35 Not used
Remark:A contact assigned to the delivery party
Example: CTA+DL+ACCT'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 42 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG4 O 1
Delivery Contact
COM O 5
Communication contact
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C076 Communication contact M
3148 Communication addressidentifier
M an..100 The number or virtual 'address' of a telephone in a telecommunicationsystemThe number or virtual 'address' of a telephone in an organisation'sinternal telecommunication systemThe number or virtual 'address' of a facsimile in a telecommunicationsystemThe number or virtual 'address' of an e-mail mailbox in the internet orother network.Within a given facility a detailed department mail delivery location.
3155 Communication address codequalifier
M an..3 EM Electronic mailFX TelefaxTE Telephone
Remark:
Example: COM+0123456789012:TE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 43 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG4 O 1
Scheduling contact
CTA M 1
Scheduling Contact
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3139 Contact function code R an..3 SC Schedule contact
C056 Information Contact Details R
3413 Department or employee namecode
O an..17 Identifies the department or employee by a unique identifier other thantheir name when given as a contact.
3412 Department or employee name O an..35 Name of the contact person or department
Remark:Information that identifies the contact person or department responsible for the scheduling of deliveries, e.g. by releasing call-off orders ordelivery forecasts, together with information about how they can be contacted.
Example: CTA+SC+:Scheduling'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 44 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG4 O 1
Scheduling contact
COM O 5
Communication contact
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C076 Communication contact M
3148 Communication addressidentifier
M an..100 The number or virtual 'address' of a telephone in a telecommunicationsystemThe number or virtual 'address' of a telephone in an organisation'sinternal telecommunication systemThe number or virtual 'address' of a facsimile in a telecommunicationsystemThe number or virtual 'address' of an e-mail mailbox in the internet orother network.Within a given facility a detailed department mail delivery location.
3155 Communication address codequalifier
M an..3 TE Telephone
Remark:
Example: COM+0123456789012:TE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 45 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG2 R 1
SellerSeller
NAD M 1
Seller's Name and Address
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3035 Party function code qualifier M an..3 SU Supplier
C082 Party identification details R
3039 Party identifier M an..35 Unique identification of a party by an ID.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
R an..3 Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
C058 Name and address O
3124 Name and address description M an..35 A text line containing non-structured address information.
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
C080 Party name O
3036 Party name M an..35 Single text line for specification of a name
3036 Party name O an..35 see 3036#1
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3045 Party name format code N an..3 Not used
C059 Street O
3042 Street and number or postoffice box identifier
M an..35 The name that identifies the location of a house or building: usuallywithin a street as part of an address.
3042 Street and number or postoffice box identifier
O an..35 see 3042#1
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3164 City name O an..35 The name of the city, town, or village of this address.
C819 Country sub-entity details O
3229 Country sub-entity name code R an..9 State or region within a country. The use of UN LoCodes isrecommended.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3228 Country sub-entity name N an..70 Not used
3251 Postal identification code O an..17 The identifier for one or more properties according to the postal serviceof that country; a group of letters and/or numbers added to the postaladdress to assist in the sorting of mail.
3207 Country name code O an..3 Provides the country part of an address using a code. Use ISO3166 two alpha code.
Remark:Party selling merchandise to a buyer.Seller: The party who has liability to fulfill the contract. It is often used in the sense of seller and supplier and ship-from.In Europe and Japan seller is preferred to identify the selling and supplying party. Supplier is only included when the party actually differsfrom the seller.
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 46 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Example: NAD+SU+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 47 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG2 O 1 StatusCont
i O
Ship FromShip From
NAD M 1
Ship From's Name and Address
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3035 Party function code qualifier M an..3 SF Ship from
C082 Party identification details O
3039 Party identifier M an..35 Unique identification of a party by an ID.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.5 ISO (International Organization for Standardization)
10 ODETTE16 US, D&B (Dun & Bradstreet Corporation)91 Assigned by seller or seller's agent92 Assigned by buyer or buyer's agent
289 JP,JIPDEC/ECPC (Japan Information ProcessingDevelopment Center / Electronic Commerce PromotionCenter)
C058 Name and address O
3124 Name and address description M an..35 A text line containing non-structured address information.
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
3124 Name and address description O an..35 see 3124#1
C080 Party name O
3036 Party name M an..35 Single text line for specification of a name
3036 Party name O an..35 see 3036#1
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3045 Party name format code N an..3 Not used
C059 Street O
3042 Street and number or postoffice box identifier
M an..35 The name that identifies the location of a house or building: usuallywithin a street as part of an address.
3042 Street and number or postoffice box identifier
O an..35 see 3042#1
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3164 City name O an..35 The name of the city, town, or village of this address.
C819 Country sub-entity details O
3229 Country sub-entity name code R an..9 State or region within a country. The use of UN LoCodes isrecommended.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3228 Country sub-entity name N an..70 Not used
3251 Postal identification code O an..17 The identifier for one or more properties according to the postal service
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 48 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
of that country; a group of letters and/or numbers added to the postaladdress to assist in the sorting of mail.
3207 Country name code O an..3 Provides the country part of an address using a code. Use ISO3166 two alpha code.
Remark:The party which consigns or sends goods.
Example: NAD+SF+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 49 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG6 R 9999
Ship-to level
GEI M 1
Processing information
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
9649 Processing information codequalifier
M an..3 3 Scheduling type information
C012 Processing indicator O
7365 Processing indicatordescription code
O an..3 StatusConti R
Code indicating the scope of a delivery schedule: complete informationor only changed information.
37 Complete informationAt this point, the code indicates that the delivery schedule informationfor a given Ship-to contains is either a complete schedule and replacescompletely any previous information for that ship-to or contains onlychanges.If instruction update action code is given for the individual line items,only code 38 = replaced would be applicable if code 37 = completeinformation is given here.Code 36 =change information may be used together with codes 3 and 9in Instruction Update Action code.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
7364 Processing indicatordescription
N an..35 Not used
7187 Process type description code N an..17 Not used
Remark:This level gives the delivery instruction details (schedule dates, scheduled quantities etc.) for one individual ship-to party e.g. a plant in adelivery instruction or forecast.
Example: GEI+3+37'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 50 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG7 O 1 StatusCont
i R
Ship-to
NAD M 1
Ship-to
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3035 Party function code qualifier M an..3 ST Ship to
C082 Party identification details O StatusConti R
3039 Party identifier M an..35 Unique identification of a party by an ID.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
R an..3 Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
C058 Name and address N
3124 Name and address description N an..35 Not used
3124 Name and address description N an..35 Not used
3124 Name and address description N an..35 Not used
3124 Name and address description N an..35 Not used
3124 Name and address description N an..35 Not used
C080 Party name N
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3036 Party name N an..35 Not used
3045 Party name format code N an..3 Not used
C059 Street N
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3042 Street and number or postoffice box identifier
N an..35 Not used
3164 City name N an..35 Not used
C819 Country sub-entity details N
3229 Country sub-entity name code N an..9 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3228 Country sub-entity name N an..70 Not used
3251 Postal identification code N an..17 Not used
3207 Country name code N an..3 Not used
Remark:The party to which goods are to be shipped (consigned). Identifies a delivery point and its attached information when a delivery pointmethod is being used. / plantThe Ship-to must be used, if there are multiple customer/buyer locations included in a DELFOR. In addition, in European businessprocesses this ship-to party is often required even if it repeats the information given for the buyer already.
Example: NAD+ST+082864711::92'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 51 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG7 O 1 StatusCont
i R
Ship-to
LOC O 1
Place of discharge
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3227 Location function code qualifier M an..3 11 Place of discharge
C517 Location identification R
3225 Location name code O an..35 Identifier / code specifying the name of the place of discharge.KO consignment material
1000 Abladestelle
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 StatusConti R
Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
3224 Location name O an..256 Name of place of discharge, other than city name.
C519 Related location oneidentification
N
3223 First related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3222 First related location name N an..70 Not used
C553 Related location twoidentification
N
3233 Second related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3232 Second related location name N an..70 Not used
5479 Relation code N an..3 Not used
Remark:Place of discharge: Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are unloaded from the means oftransport having been used for their carriage.
Example: LOC+11+DOCK 5::92:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 52 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG7 O 1 StatusCont
i R
Ship-to
LOC O 4
Place of delivery / Internal place of destination
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3227 Location function code qualifier M an..3 18 Warehouse
C517 Location identification R
3225 Location name code O an..35 Identifier / code specifying the name of a location.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 StatusConti R
Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
3224 Location name O an..256 Name of place of discharge, other than city name.
C519 Related location oneidentification
N
3223 First related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3222 First related location name N an..70 Not used
C553 Related location twoidentification
N
3233 Second related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3232 Second related location name N an..70 Not used
5479 Relation code N an..3 Not used
Remark:An internal location within the ship-to's premises, where goods are moved to after they have been unloaded, e.g. an assembly line, aninternal warehouse, etc.
Example: LOC+18+DOCK 5::92:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 53 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG7 O 1 StatusCont
i R
Ship-to
FTX O 5 StatusCont
i N
General Information Text
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4451 Text subject code qualifier M an..3 AAI General information
4453 Free text function code N an..3 Not used
C107 Text reference N
4441 Free text description code N an..17 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C108 Text literal R
4440 Free text M an..256 A line of plain, non-structured text information.
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 see 4440#1
3453 Language name code O an..3 Code specifying the language name. Use ISO 639-1988.
4447 Free text format code N an..3 Not used
Remark:General information text
Example: FTX+AAI+++Werksurlaub vom .. bis ..:X:X:X:X+AA'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 54 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
LIN M 1
Line item
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
1082 Line item identifier O an..6 StatusConti R
1 fix value
1229 Action request/notificationdescription code
O an..3 StatusConti N
Code indicating action required as a result of the new instruction.1 Added2 Deleted9 Amendments
38 ReplacedCode 1 - individual schedule lines are added to the existing schedule.Code 2 - individual schedule lines are deleted from the existingschedule.Code 9 - Amendments - means the shedule lines of a previous forecast/instruction are replaced only for the specific horizon indicated. Allfigures before and after remain valid. This requires an effective fromand an effective to date on the header level.Code 38 - the complete previous forecast / instruction for this line itemis replaced by new figures for the full horizon. The horizon boundariesare replaced as well. It implies that the old forecast is deleted. Example:old forecast was July to December, new forecast is July to November:all figures for July to November are replaced by the new ones andfigures for December are to be deleted.See also remarks on Schedule Scope Code (DE 7365 in GEI segment).It is a recommended business practice to use at least one times a zeroquantity schedule line for articles that have been part of previousschedules but are now no longer part of the schedule in the case of the'complete replacement' situation.
C212 Item number identification O StatusConti R
7140 Item identifier R an..35 Information directly relating to the identification of an article by thebuyer's identification system.Note: The term article is synonym with the term item. Since in Odetteand in the globlal joint automotive projects the term article has beenused, this naming convention has been continued.Part number
7143 Item type identification code O an..3 StatusConti R
IN Buyer's item number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C829 Sub-line information N
5495 Sub-line indicator code N an..3 Not used
1082 Line item identifier N an..6 Not used
1222 Configuration level number N n..2 Not used
7083 Configuration operation code N an..3 Not used
Remark:An article required by the buyer, which is scheduled to be delivered. All other segments in the detail section following the LIN segmentrefer to the line item.
Example: LIN+1+1+PN-32212:IN'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 55 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
PIA O 1
Additional product id
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4347 Product identifier code qualifier M an..3 1 Additional identification
C212 Item number identification M
7140 Item identifier R an..35 Information directly relating to the identification of an item by the seller'sidentification system.Note: The term article is synonymous with the term item. Since inOdette and in the global joint automotive projects the term article hasbeen used, this naming convention has been continued.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
Remark:
Example: PIA+1+C2'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 56 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
PIA O 1
Additional product id
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4347 Product identifier code qualifier M an..3 1 Additional identification
C212 Item number identification M
7140 Item identifier R an..35 Information directly relating to the identification of an item by the seller'sidentification system.Note: The term article is synonymous with the term item. Since inOdette and in the global joint automotive projects the term article hasbeen used, this naming convention has been continued.
7143 Item type identification code R an..3 EC Engineering change level
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification N
7140 Item identifier N an..35 Not used
7143 Item type identification code N an..3 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
Remark:
Example: PIA+1+C2:EC'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 57 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
PIA O 1 StatusCont
i N
Additional product id
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4347 Product identifier code qualifier M an..3 1 Additional identification
C212 Item number identification M
7140 Item identifier R an..35 Information directly relating to the identification of an item by the seller'sidentification system.Note: The term article is synonymous with the term item. Since inOdette and in the global joint automotive projects the term article hasbeen used, this naming convention has been continued.
7143 Item type identification code R an..3 AA Product version numberBL Control numberCL Colour numberDR Drawing revision numberEC Engineering change levelGB Buyer's internal product group codeMP Product/service identification numberRY Record keeping of model yearSA Supplier's article numberTG Transport group numberUA Ultimate customer's article numberUP UPC (Universal product code)VN Vendor item number
The listed codes are applicable also to the DE 7143 in the followingrepetitions of CDE C212.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O Subsequent iterations of the composite C212 provide additional pairs ofdata elements 7140 - 7143 to further describe the line item. The abovecode list applies to each occurence of data element 7143 in these pairs.
7140 Item identifier R an..35 Number assigned to an article by the supplier of that article.
7143 Item type identification code R an..3 VN Vendor item number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 Information directly relating to the identification an item by themanufacturer's identification system.
7143 Item type identification code R an..3 Information directly relating to the identification an item by themanufacturer's identification system.
MF Manufacturer's (producer's) article number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 Ultimate Customer's Article ID is commonly used to indicate the OEM'sarticle number in a tier1 to tier 2 transaction (where tier 1 is the buyer,tier 2 is the seller and OEM is the ultimate customer).
7143 Item type identification code R an..3 UA Ultimate customer's article number
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 58 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 A code associated with a grouping of related parts
7143 Item type identification code R an..3 GB Buyer's internal product group code
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
Remark:
Example: PIA+1+C2:SA+xx:VN+X:MF+X:UA+X:GB'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 59 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
PIA O 1 StatusCont
i N
Additional product id
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4347 Product identifier code qualifier M an..3 1 Additional identification
C212 Item number identification M
7140 Item identifier R an..35 Identifier used to group articles into a predescribed unit load forshipment/despatch as agreed between partners.
7143 Item type identification code R an..3 TG Transport group number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 Old article ID, that is replaced by the new item.
7143 Item type identification code R an..3 AA Product version number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 ID specifying an items colour.
7143 Item type identification code R an..3 CL Colour number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 Reference number assigned to an engineering change by the originator.
7143 Item type identification code R an..3 EC Engineering change level
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C212 Item number identification O
7140 Item identifier R an..35 The revision number of the design specification for an article.
7143 Item type identification code R an..3 DR Drawing revision number
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
Remark:
Example: PIA+1+X:TG+X:AA+X:CL+X:EC+X:DR'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 60 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
IMD O 10 1
Item short description
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
7077 Description format code O an..3 StatusConti R
Code specifying the format of a description.F Free-form
Code F - Data description should be placed in data element 7008.Code S - Structured code information should be placed in data element7009.Code X - Both data element 7008 and 7009 should be used.
C272 Item characteristic O
7081 Item characteristic code R an..3 StatusConti O
4 Finish5 End use application8 Product
26 Ship to line32 Type of test/inspection61 New article62 Obsolete article63 Current article66 Current article spares67 Balance out article79 Other physical description
116 Corrosion resistanceConti-Comment Revision status
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.
C273 Item description O StatusConti O
7009 Item description code O an..17 StatusConti N
Code indicating the status of an article using codes from JAI code listJAI004.Open for company's individual auxilliary information.
1131 Code list identification code N an..17 StatusConti N
Not used
3055 Code list responsible agencycode
O an..3 StatusConti N
Code specifying the agency responsible for a code list.10 ODETTE
272 Joint Automotive Industry agency
7008 Item description O an..35 StatusConti R
The short name or description of an article or service in plain text.For Japanese business environment up to 198 lines of text may benecessary.
FormatConti an..357008 Item description O an..35 FormatConti an..353453 Language name code O an..3 Status
Conti NCode specifying the language name. Use ISO 639-1988.
7383 Surface or layer code N an..3 Not used
Remark:
Example: IMD+F+4::10+01::10:X:X:AA'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 61 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
MEA O 4 StatusCont
i N
Measurements
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
6311 Measurement purpose codequalifier
M an..3 PD Physical dimensions (product ordered)WT Weights
C502 Measurement details R
6313 Measured attribute code R an..3 LN LengthTH Thickness
U Weight per unitWD Width dimension
6321 Measurement significancecode
N an..3 Not used
6155 Non-discrete measurementname code
N an..17 Not used
6154 Non-discrete measurementname
N an..70 Not used
C174 Value/range R
6411 Measurement unit code M an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
6314 Measure R an..18 Weight (mass) of goods including any packing normally going with themto a buyer in a retail sale (Weight of articles in the package).Length dimension measureThickness of material. This measure is used for raw materials only.
6162 Range minimum quantity N n..18 Not used
6152 Range maximum quantity N n..18 Not used
6432 Significant digits quantity N n..2 Not used
7383 Surface or layer code N an..3 Not used
Remark:
Example: MEA+PD+TH+05:4'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 62 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
LOC O 1 StatusCont
i N
Place of discharge
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3227 Location function code qualifier M an..3 11 Place of discharge
C517 Location identification R
3225 Location name code O an..35 Identifier / code specifying the name of a location.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.
3224 Location name O an..256 Name of place/location, other than city name.
C519 Related location oneidentification
O The previously scheduled seaport, airport, freight terminal, rail station orother place at which the goods (cargo) are unloaded from the means oftransport having been used for their carriage. If the buyer changes thedestination (place of discharge) between two delivery forecasts orinstructions, this information is used to indicate the change to thesupplier. This shall prevent the supplier from treating the new scheduleditem as an additional quantity. (For some suppliers the place ofdischarge is a key figure in the schedule process)
3223 First related location namecode
O an..25 Identifier / code specifying the name of a location.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.
3222 First related location name O an..70 Name of place/location, other than city name.
C553 Related location twoidentification
N
3233 Second related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3232 Second related location name N an..70 Not used
5479 Relation code N an..3 Not used
Remark:Seaport, airport, freight terminal, rail station or other place at which the goods (cargo) are unloaded from the means of transport havingbeen used for their carriage.
Example: LOC+11+:::X+:::X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 63 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
LOC O 6 StatusCont
i N
Internal place of destination
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3227 Location function code qualifier M an..3 7 Place of delivery13 Place of transhipment18 Warehouse54 Manufacturing department
159 Additional internal destination229 Inspection site
C517 Location identification R
3225 Location name code O an..35 Identifier / code specifying the name of a location.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.92 Assigned by buyer or buyer's agent
3224 Location name O an..256 Name of place/location, other than city name.
C519 Related location oneidentification
N
3223 First related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3222 First related location name N an..70 Not used
C553 Related location twoidentification
N
3233 Second related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3232 Second related location name N an..70 Not used
5479 Relation code N an..3 Not used
Remark:An internal location within the ship-to's premises, to which goods are moved after they have been unloaded, e.g. an assembly line, aninternal warehouse, etc.
Example: LOC+7+DOCK 5::92:OUTBACK'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 64 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
LOC O 1 StatusCont
i N
Place of pick-up
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3227 Location function code qualifier M an..3 9 Place of loading
C517 Location identification R
3225 Location name code O an..35 Identifier / code specifying the name of a location.
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
O an..3 Code specifying the agency responsible for a code list.
3224 Location name O an..256 Name of place/location, other than city name.
C519 Related location oneidentification
N
3223 First related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3222 First related location name N an..70 Not used
C553 Related location twoidentification
N
3233 Second related location namecode
N an..25 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
3232 Second related location name N an..70 Not used
5479 Relation code N an..3 Not used
Remark:Place where goods have to be stored for pick-up by the party responsible for physical transport in case of pick-up process.
Example: LOC+9+:::X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 65 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG12 R 9999 1
Scheduled Article Details
FTX O 5 StatusCont
i N
General information text
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4451 Text subject code qualifier M an..3 AAI General information
4453 Free text function code N an..3 Not used
C107 Text reference N
4441 Free text description code N an..17 Not used
1131 Code list identification code N an..17 Not used
3055 Code list responsible agencycode
N an..3 Not used
C108 Text literal R
4440 Free text M an..256 A line of plain, non-structured text information.
4440 Free text O an..256 see 4440#1
4440 Free text O an..256 StatusConti N
see 4440#1
4440 Free text O an..256 StatusConti N
see 4440#1
4440 Free text O an..256 StatusConti N
see 4440#1
3453 Language name code O an..3 StatusConti N
Code specifying the language name. Use ISO 639-1988.
4447 Free text format code N an..3 Not used
Remark:General information text
Example: FTX+AAI+++X:X+DE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 66 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG13 O 10 StatusCont
i N
Other reference
DTM O 2
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 171 Reference date/time137 Document issue date time
The use of 171 is recommended. 137 is included for compatibilityreasons.
2380 Date or time or period text R an..35 Date on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:
Example: DTM+171:20040528:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 67 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG14 O 1 StatusCont
i N
Article related contact information
CTA M 1
Contact information
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
3139 Contact function code R an..3 SC Schedule contactDL Delivery contactIC Information contact
MC Material control contactPD Purchasing contact
C056 Department or employeedetails
R
3413 Department or employee namecode
O an..17 Identifies the department or employee by a unique identifier other thantheir name when given as a contact.
3412 Department or employee name O an..35 Name of the contact person or department
Remark:Article related information that identifies the contact person or department responsible for the scheduling of deliveries. This contact maychange from item to item and is therefore related to the scheduled article level rather than to the ship-to level.
Example: CTA+SC+X:X'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 68 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG14 O 1 StatusCont
i N
Article related contact information
COM O 5
Communication contact
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C076 Communication contact M
3148 Communication addressidentifier
M an..100 The number or virtual 'address' of a telephone in a telecommunicationsystemThe number or virtual 'address' of a telephone in an organisation'sinternal telecommunication systemThe number or virtual 'address' of a facsimile in a telecommunicationsystemThe number or virtual 'address' of an e-mail mailbox in the internet orother network.Within a given facility a detailed department mail delivery location.
3155 Communication address codequalifier
M an..3 EM Electronic mailEX ExtensionFX TelefaxIM Internal mailTE Telephone
Remark:
Example: COM+X:TE'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 69 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 2
Delivery balance
QTY M 1
Delivery balance quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 83 Backorder quantityCode 73 is related to an order quantity, whereas 83 indicates thedifference between instructed quantity and actually received quantity.
6060 Quantity M n..15 Difference between quantity scheduled and quantity received. Forpositive values, the quantity scheduled is greater than the quantityreceived.
6411 Measurement unit code O an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+83:5000:05'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 70 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 99 Statu 1sCont
i O
Cumulative quantity received
QTY M 1
Cumulative quantity received
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 70 Cumulative quantity received
6060 Quantity R n..15 Cumulative quantity
Remark:
Example: QTY+70:100000'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 71 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 99 Statu 1sCont
i O
Cumulative quantity received
DTM O 2 StatusCont
i O
Cumulative quantity date(s)
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 51 Cumulative quantity start date
2380 Date or time or period text R an..35 Start date of a given period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+51:20050101:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 72 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 1 Statu 1sCont
i O
Received quantityNameSV Quantity of last shipment
QTY M 1
Despatched and received quantitiesNameSV Quantity of last shipment
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 48 Received quantity
6060 Quantity M n..15 Despatched Quantity ValueThe quantity received by the ship-to party.
6411 Measurement unit code O an..8 StatusConti R
Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
C62 one
Remark:
Example: QTY+48:10000:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 73 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 1 Statu 1sCont
i O
Received quantityNameSV Quantity of last shipment
DTM O 2
Despatch and/or receipt date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 310 Received date/time
2380 Date or time or period text R an..35 Date/time on which the goods are or are expected to be despatched orshipped.Only to be used, if not a complete receiving advice reference is used.Date when the Ship-to party receives a shipment
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD
Remark:
Example: DTM+310:20040528:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 74 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG17 O 99
Despatch / receiving document reference
RFF M 1
Reference
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 AAU Despatch note document identifier
1154 Reference identifier R an..17 Unique identifier of the despatch advice
1156 Document line identifier N an..6 Not used
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:Reference identifier assigned by the issuer to the document for a despatch advice
Example: RFF+AAU:12345'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 75 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG17 O 99
Despatch / receiving document reference
DTM O 1
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 171 Reference date/time
2380 Date or time or period text R an..35 Date, on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD
Remark:
Example: DTM+171:X:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 76 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 99 StatusCont
i N
Despatched and received quantities
QTY M 1
Despatched and received quantities
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 12 Despatch quantity48 Received quantity
194 Received and accepted
6060 Quantity M n..15 Despatched Quantity ValueThe quantity received by the ship-to party.
6411 Measurement unit code O an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+12:10000:05'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 77 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG16 O 99 StatusCont
i N
Despatched and received quantities
DTM O 2
Despatch and/or receipt date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 11 Despatch date and or time50 Goods receipt date/time
310 Received date/time
2380 Date or time or period text R an..35 Date/time on which the goods are or are expected to be despatched orshipped.Only to be used, if not a complete receiving advice reference is used.Date when the Ship-to party receives a shipment
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:
Example: DTM+50:20040528:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 78 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG17 O 99
Despatch / receiving document reference
RFF M 1
Reference
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C506 Reference M
1153 Reference code qualifier M an..3 AAK Despatch advice numberAAU Despatch note document identifier
SI SID (Shipper's identifying number for shipment)
1154 Reference identifier R an..17 Unique identifier of the despatch advice
1156 Document line identifier O an..6 Sequential number assigned by the sender to identify a line item withina message or document.
4000 Reference version identifier N an..35 Not used
1060 Revision identifier N an..6 Not used
Remark:Reference identifier assigned by the issuer to the document for a despatch advice
Example: RFF+AAK:12345:01'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 79 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG17 O 99
Despatch / receiving document reference
DTM O 1
Referenced document's date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
M an..3 171 Reference date/time
2380 Date or time or period text R an..35 Date, on which a document or business signal was issued.
2379 Date or time or period formatcode
O an..3 102 CCYYMMDD203 CCYYMMDDHHMM204 CCYYMMDDHHMMSS
Remark:
Example: DTM+171:X:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 80 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG18 D 999 StatusCont
i O
Scheduling data Firm
SCC M 1
Scheduling conditions
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4017 Delivery plan commitment levelcode
M an..3 Code indicating the level of commitment of a delivery instruction.1 Firm
4493 Delivery instruction code N an..3 Not used
C329 Pattern description N
2013 Frequency code N an..3 Not used
2015 Despatch pattern code N an..3 Not used
2017 Despatch pattern timing code N an..3 Not used
Remark:Information providing dates/times/periods of deliveries, quantity, and additional references valid for the item.Delivery Date and Delivery Period shall be used mutually exclusive.
Example: SCC+1'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 81 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Scheduled quantity
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 Code identifying the reason of the delivery instruction.113 Quantity to be delivered
In North America, code 1 is used to indicate the forecast nature of thisquantity. However, in Europe usually only the SCC indicates whether itis forecast or firm delivery instruction. Code 1 and 113 are synonyms inthis sense.Codes 18, 21, 143, and 167 are considered as auxilliary information,which has to be preceded by actual delivery requirements.Code 18 - a quantity in a given past or previous period - for statistical ortrend reasonsCode 21 - is referring to the forecasted figure in comparison with theactual instructed delivery quantity.Code 143- in case of a run out process, the remaining quantity up to theend of production is indicatedCode 167 - accumulation of all individual schedule lines for this article
6060 Quantity M n..15 Quantity scheduled by the buyer (material release issuer) to bedelivered at a specified point in time or within a period.
6411 Measurement unit code C an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+113:4500:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 82 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Scheduled quantity
DTM R 9 StatusCont
i R
Scheduled date(s)
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 2 Delivery date/time, requestedThe codes are used to indicate:Code 2 - delivery at destination, fixed date
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+2:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 83 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Scheduled quantity
DTM R 9 StatusCont
i N
Scheduled date(s)
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 64 Delivery date/time, earliestThe codes are used to indicate:Code 64 - shipment (delivery initiated)date/time of departure, earliest
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+64:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 84 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 O 999 StatusCont
i N
Cumulative quantity
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 3 Cumulative quantityZZZ may be used if QTY transmits the number of periods and theperiod type is specified in DTM+273. Code 207 is used to indicate the total order cycle hours, which isdefined as the number of working hours in the total order cycle.
6060 Quantity M n..15 Actual number of periods (days, weeks etc.) belonging to a schedule orsimilar time horizons.The highest quantity of an item previously scheduled from a specifiedstart date.Discrete quantity of materials or finished goods authorised to beproduced or purchased to meet the expected requirements of the buyeras committed in a forecast or schedule.
6411 Measurement unit code O an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+3:10000:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 85 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG18 O 999 StatusCont
i O
Commitment for manufacturing and material
SCC M 1
Scheduling conditions
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4017 Delivery plan commitment levelcode
M an..3 Code indicating the buyer's level of commitment for the cumulativequantities scheduled.
2 Commitment for manufacturing and material3 Commitment for material
4493 Delivery instruction code N an..3 Not used
C329 Pattern description N
2013 Frequency code N an..3 Not used
2015 Despatch pattern code N an..3 Not used
2017 Despatch pattern timing code N an..3 Not used
Remark:Providing the level of commitment of the buyer, per type of commitment.The authorisation may be given: -- as a discrete quantity- for a period in terms of start and end date- for a period in terms of number of periods
Example: SCC+2'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 86 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Quantity to be delivered
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 Code identifying the reason of the delivery instruction.113 Quantity to be delivered
In North America, code 1 is used to indicate the forecast nature of thisquantity. However, in Europe usually only the SCC indicates whether itis forecast or firm delivery instruction. Code 1 and 113 are synonyms inthis sense.Codes 18, 21, 143, and 167 are considered as auxilliary information,which has to be preceded by actual delivery requirements.Code 18 - a quantity in a given past or previous period - for statistical ortrend reasonsCode 21 - is referring to the forecasted figure in comparison with theactual instructed delivery quantity.Code 143- in case of a run out process, the remaining quantity up to theend of production is indicatedCode 167 - accumulation of all individual schedule lines for this article
6060 Quantity M n..15 Quantity scheduled by the buyer (material release issuer) to bedelivered at a specified point in time or within a period.
6411 Measurement unit code O an..8 StatusConti R
Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+113:4500:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 87 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Quantity to be delivered
DTM R 9
Delivery date/time, requested
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 2 Delivery date/time, requestedThe codes are used to indicate:Code 2 - delivery at destination, fixed date
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+2:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 88 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999
Quantity to be delivered
DTM R 9 StatusCont
i N
Authorization date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 89 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 O 999
Latest cumulative quantity
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 74 Latest cumulative quantityZZZ may be used if QTY transmits the number of periods and theperiod type is specified in DTM+273. Code 207 is used to indicate the total order cycle hours, which isdefined as the number of working hours in the total order cycle.
6060 Quantity M n..15 Actual number of periods (days, weeks etc.) belonging to a schedule orsimilar time horizons.The highest quantity of an item previously scheduled from a specifiedstart date.Discrete quantity of materials or finished goods authorised to beproduced or purchased to meet the expected requirements of the buyeras committed in a forecast or schedule.
6411 Measurement unit code O an..8 StatusConti R
Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+74:10000:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 90 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 O 999
Latest cumulative quantity
DTM R 9
Authorization date
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 91 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG18 D 999 StatusCont
i O
Scheduling data Planning/forecast
SCC M 1
Scheduling conditions
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
4017 Delivery plan commitment levelcode
M an..3 Code indicating the level of commitment of a delivery instruction.4 Planning/forecast
4493 Delivery instruction code N an..3 Not used
C329 Pattern description N
2013 Frequency code N an..3 Not used
2015 Despatch pattern code N an..3 Not used
2017 Despatch pattern timing code N an..3 Not used
Remark:Information providing dates/times/periods of deliveries, quantity, and additional references valid for the item.Delivery Date and Delivery Period shall be used mutually exclusive.
Example: SCC+4'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 92 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999 StatusCont
i R
Scheduled quantity
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 Code identifying the reason of the delivery instruction.113 Quantity to be delivered
In North America, code 1 is used to indicate the forecast nature of thisquantity. However, in Europe usually only the SCC indicates whether itis forecast or firm delivery instruction. Code 1 and 113 are synonyms inthis sense.Codes 18, 21, 143, and 167 are considered as auxilliary information,which has to be preceded by actual delivery requirements.Code 18 - a quantity in a given past or previous period - for statistical ortrend reasonsCode 21 - is referring to the forecasted figure in comparison with theactual instructed delivery quantity.Code 143- in case of a run out process, the remaining quantity up to theend of production is indicatedCode 167 - accumulation of all individual schedule lines for this article
6060 Quantity M n..15 Quantity scheduled by the buyer (material release issuer) to bedelivered at a specified point in time or within a period.
6411 Measurement unit code C an..8 StatusConti R
Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+113:4500:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 93 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999 StatusCont
i R
Scheduled quantity
DTM R 9 StatusCont
i O
Scheduled date(s)
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 2 Delivery date/time, requestedThe codes are used to indicate:Code 2 - delivery at destination, fixed date
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+2:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 94 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999 StatusCont
i R
Scheduled quantity
DTM R 9 StatusCont
i O
Delivery date time, last
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 63 Delivery date time, lastThe codes are used to indicate:Code 63 - shipment (delivery initiated) date/time of departure, latest
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+63:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 95 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999 StatusCont
i R
Scheduled quantity
DTM R 9 StatusCont
i O
Delivery date/time, earliest
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C507 Date/time/period M
2005 Date or time or period functioncode qualifier
R an..3 64 Delivery date/time, earliestThe codes are used to indicate:Code 64 - shipment (delivery initiated)date/time of departure, earliest
2380 Date or time or period text R an..35 Date / period
2379 Date or time or period formatcode
O an..3 StatusConti R
102 CCYYMMDD
Remark:
Example: DTM+64:20040610:102'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 96 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 R 999 StatusCont
i R
Scheduled quantity
DTM R 9 StatusCont
i N
Delivery date/time, expected
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
2380 Date or time or period text R an..35 Date / period
Remark:
Example: DTM+:20040610'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 97 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
SG19 O 999 StatusCont
i N
Cumulative quantity
QTY M 1
Quantity
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
C186 Quantity details M
6063 Quantity type code qualifier M an..3 3 Cumulative quantityZZZ may be used if QTY transmits the number of periods and theperiod type is specified in DTM+273. Code 207 is used to indicate the total order cycle hours, which isdefined as the number of working hours in the total order cycle.
6060 Quantity M n..15 Actual number of periods (days, weeks etc.) belonging to a schedule orsimilar time horizons.The highest quantity of an item previously scheduled from a specifiedstart date.Discrete quantity of materials or finished goods authorised to beproduced or purchased to meet the expected requirements of the buyeras committed in a forecast or schedule.
6411 Measurement unit code O an..8 Code specifying the unit of measurement, use UN/ECERecommendation 20, Common code.
Remark:
Example: QTY+3:10000:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 98 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
UNT M 1
Message trailer
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
0074 Number of segments in themessage
M n..6
0062 Message reference number M an..14
Remark:
Example: UNT+122+123456'
Continental Automotive GmbH-Template
Continental Automotive GmbH-Template; JAI Issue date: 01.03.2010 Print date: 20.08.2010 Page: 99 /1.1; 2009 ContiGenerated by GEFEG.FX
MaxOcc = Maximum occurrence of the segment/group St = Status: M=Mandatory, C=Conditional, R=Required, O=Optional,D=Dependent, A=Advised, N=Not used
Tag JAI
St MaxOcc
Conti
St MaxOcc
UNZ M 1
Interchange trailer
Joint Automotive Industry Conti
Tag Name St Format St Usage / Remark
0036 Interchange control count M n..6
0020 Interchange control reference M an..14 Repetition of the value transmitted in UNB data element 0020.
Remark:
Example: UNZ+1+144659'
Continental Automotive GmbH-Template
Example Message
Continental Automotive GmbH- DELFOR / UN D.04A S3 Issue date: 01.03.2010Template; JAI 1.1; 2009 ContiGenerated by GEFEG.FX
Print date: 20.08.2010Page: 100 /
No = Consecutive segment number
No Tag Example
01 UNA UNA:+.? '
02 UNB UNB+UNOC:3+OD012345:59:123+987654321:1:X+071205:1446+144659++++++1'
03 UNH UNH+123456+DELFOR:D:04A:UN:GA0511'
04 BGM BGM+241:::text+231234:02:A+5'
05 DTM DTM+137:20040523:102'
Document Issue Date
06 DTM DTM+257:20040523:102'
Calculation Date
07 DTM DTM+158:20040101:102'
Effective From Date
08 DTM DTM+159:20041231:102'
Effective To Date
09 DTM DTM+55:20040101:102'
Confirmation Date
10 DTM DTM+264::803'
Release Frequency Period
11 DTM DTM+157:20040101:102'
Validity Start Date
12 DTM DTM+36:20040101:102'
Expiry Date
13 DTM DTM+267:20040101:102'
Rate/Price Date
14 DTM DTM+307:20040101:102'
Payment Instruction Date
15 DTM DTM+540:20040303:102'
Instructions original execution date
16 FTX FTX+AAI+++Legal Notice::::X+DE'
Information Text
SG1
17 RFF RFF+BO:X:X'
18 DTM DTM+171:X:102'
Referenced document's date
SG1
19 RFF RFF+AIF:X:X'
20 DTM DTM+171:X:102'
Referenced document's date
SG1
21 RFF RFF+AIV:X:X'
Event reference number
SG1
22 RFF RFF+VA:X'
SG1
Continental Automotive GmbH-Template
Continental Automotive GmbH- DELFOR / UN D.04A S3 Issue date: 01.03.2010Template; JAI 1.1; 2009 ContiGenerated by GEFEG.FX
Print date: 20.08.2010Page: 101 /
No = Consecutive segment number
No Tag Example
23 RFF RFF+AAN:00283'
Delivery schedule number
24 DTM DTM+171:20040528:102'
Referenced document's date
SG2
27 NAD NAD+BY+88012::92+X::::X+OEM INC:X+Industry Road 13:X+Smalltown++12345+
DE'
Buyer's Name and Address
SG4
28 CTA CTA+DL+ACCT'
Delivery Contact
29 COM COM+0123456789012:TE'
SG4
34 CTA CTA+SC+:Scheduling'
Scheduling Contact
35 COM COM+0123456789012:TE'
SG2
51 NAD NAD+SU+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
Seller's Name and Address
SG2
60 NAD NAD+SF+88012::92+ABC OEM:X:X:X:X+X:X+X:X+X+AE-AJ+X+DE'
Ship From's Name and Address
SG6
68 GEI GEI+3+37'
SG7
69 NAD NAD+ST+082864711::92'
Ship-to
70 LOC LOC+11+DOCK 5::92:X'
Place of discharge
71 LOC LOC+18+DOCK 5::92:X'
Place of delivery / Internal place of destination
72 FTX FTX+AAI+++Werksurlaub vom .. bis ..:X:X:X:X+AA'
General Information Text
SG12
85 LIN LIN+1+1+PN-32212:IN'
86 PIA PIA+1+C2:VN'
87 PIA PIA+1+C2:EC'
88 PIA PIA+1+C2:SA+xx:VN+X:MF+X:UA+X:GB'
89 PIA PIA+1+X:TG+X:AA+X:CL+X:EC+X:DR'
90 IMD IMD+F+4::10+01::10:X:X:AA'
Item short description
91 MEA MEA+PD+TH+05:4'
Continental Automotive GmbH-Template
Continental Automotive GmbH- DELFOR / UN D.04A S3 Issue date: 01.03.2010Template; JAI 1.1; 2009 ContiGenerated by GEFEG.FX
Print date: 20.08.2010Page: 102 /
No = Consecutive segment number
No Tag Example
92 ALI ALI+GB'
Country of origin
93 LOC LOC+11+:::X+:::X'
Place of discharge
94 LOC LOC+7+DOCK 5::92:OUTBACK'
Internal place of destination
95 LOC LOC+9+:::X'
Place of pick-up
98 FTX FTX+AAI+++X:X+DE'
General information text
SG14
101 CTA CTA+SC+X:X'
102 COM COM+X:TE'
SG16
106 QTY QTY+83:5000:05'
Delivery balance quantity
SG16
108 QTY QTY+70:100000:C62'
Cumulative quantity received
109 DTM DTM+51:20050101:102'
Cumulative quantity date(s)
SG16
115 QTY QTY+48:10000:C62'
Despatched and received quantities
116 DTM DTM+310:20040528:102'
Despatch and/or receipt date
SG17
117 RFF RFF+AAU:12345'
118 DTM DTM+171:X:102'
Referenced document's date
SG16
119 QTY QTY+12:10000:05'
Despatched and received quantities
120 DTM DTM+50:20040528:102'
Despatch and/or receipt date
SG17
121 RFF RFF+AAK:12345:01'
122 DTM DTM+171:X:102'
Referenced document's date
SG18
123 SCC SCC+1'
SG19
124 QTY QTY+113:4500:C62'
Continental Automotive GmbH-Template
Continental Automotive GmbH- DELFOR / UN D.04A S3 Issue date: 01.03.2010Template; JAI 1.1; 2009 ContiGenerated by GEFEG.FX
Print date: 20.08.2010Page: 103 /
No = Consecutive segment number
No Tag Example
125 DTM DTM+2:20040610:102'
Scheduled date(s)
126 DTM DTM+64:20040610:102'
Scheduled date(s)
SG19
127 QTY QTY+3:10000:C62'
SG18
128 SCC SCC+2'
SG19
129 QTY QTY+113:4500:C62'
130 DTM DTM+2:20040610:102'
Delivery date/time, requested
131 DTM DTM+160:20040610:102'
Authorization date
SG19
132 QTY QTY+74:10000:C62'
133 DTM DTM+160:20040610:102'
Authorization date
SG18
134 SCC SCC+4'
SG19
135 QTY QTY+113:4500:C62'
136 DTM DTM+2:20040610:102'
Scheduled date(s)
137 DTM DTM+63:20040610:102'
Delivery date time, last
138 DTM DTM+64:20040610:102'
Delivery date/time, earliest
139 DTM DTM+191:20040610:716'
Delivery date/time, expected
SG19
140 QTY QTY+3:10000:C62'
161 UNT UNT+122+123456'
162 UNZ UNZ+1+144659'