CONTENTS · duration of the warranty period. The FCC Declaration of Conformity or the FCC mark is a...

CONTENTS

Street Lights p. 8-39

Solar Street Lights p.40-53

Park Lights p. 54-83

Hanging Street Lights p. 84-87

Planet System: Intelligent Lighting for Smart Cities p. 88-93

IINNO Intelligent Innovations, Ltd.“Street Lights Catalogue”March 2020

Orion Park Light Ip. 56

Saturn Park Lightp. 66

Venus Park Lightp. 78

Orion Park Light IIp. 58

Pegasus Park Lightp. 70

Pegasus Park Lightp. 82

Mira Park Lightp. 62

Aurora Park Lightp. 74

Orion Hanging Street Lightp. 86

Atlas Street Lightp. 18

Mira Street Lightp. 30

Mira Solar Street Lightp. 42

Aquila Street Lightp. 12

Gemma Street Lightp. 34

Atria Solar Street Lightp. 46

Gemma Solar Street Lightp. 52

Orion 7 Street Lightp. 24

Sarin Street Lightp. 38

Street Lights

Solar Street Lights

Park Lights

Hanging Street Lights

INGRESS PROTECTION RATING

Rating Example

IP 6 5

Ingress protection Against Solids Against Liquids

The first number identifies the ingress protection rating against solids

1. for solid bodies with dimensions > 50mm

2. for solid bodies with dimensions > 12.5mm

3. for solid bodies with dimensions > 2.5mm

4. for solid bodies with dimensions > 1mm

5. Dust protected

6. Dust tight

The second number identifies the ingress protection rating against liquids

1. for vertically falling drops

2. for vertically falling drops when enclosure is tilted up to 15˚ vertically

3. for water sprayed at an angle up to 60˚ vertically

4. for water splashed in any direction

5. for water projected in jets against the enclosure from any direction

6. for water projected in powerful jets against the enclosure from any direction

7. for enclosure’s temporary immersion at 1 meter in the water, under defined conditions

8. for enclosure’s continuous immersion in the water, under more severe conditions to those of number 7.

IMPACT PROTECTION RATING

Rating Example

IK 05

Impact protection Mechanical Impact level

The number identifies the impact protection rating

00. No protection

01-05. for tiny impact of < 1 Joule

06. for impact of 1 Joule





SYMBOLS KEY

Certification mark that indicates conformity with health, safety, and environmental protection standards

for products sold within the European Economic Area (EEA)

The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one

of these marks, it means UL found that representative product samples met UL’s requirements

ENEC (European Norms Electrical Certification) is a certification scheme under CENELEC, accepted

throughout Europe. The ENEC Mark for electrical products demonstrates compliance with European

safety standards.

CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with

the safety of electrical and electronic components, equipment and products.

TÜV certification marks show that manufacturer’s products have met applicable safety requirements

and quality standards.

The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one

of these marks, it means UL found that representative product samples met UL’s requirements.

The cULus is a combination mark that indicates compliance with both the U.S. requirements and those of

CAN/CSA 22.1-12, which is the Canadian Electrical Code issued by the Canadian Standards Association.

INMETRO, the Brazilian accreditation body, is responsible for the accreditation of each product Certifi-

cation Body (CB). In addition, INMETRO defines the products and the respective requirements within this

certification scheme. Products manufactured in or exported to Brazil need a CB-issued certificate, stating

that the product or family meets the Brazilian requirements.

The DesignLights Consortium® is a collaboration of utility companies and regional energy efficiency

organizations. The certification is issued for commercial LED lights based on their color rendering capabil-

ities, light distribution and output, lumen maintenance, longevity or the ability to withstand stress, and the

duration of the warranty period.

The FCC Declaration of Conformity or the FCC mark is a certification mark employed on electronic

products manufactured or sold in the United States which certifies that the electromagnetic interference

from the device is under limits approved by the Federal Communications Commission.

The C-Tick mark is intended for use on products that comply with EMC standards. The label indicates that

the product complies with the applicable EMC standard and establishes a traceable link between a

product and the supplier responsible for placing it on the Australian or New Zealand market.

0-10V 1-10V DALI Triac

Non-Dimmable Product

0-10V Dimmable Product

1-10V Dimmable Product

DALI Dimmable Product

TRIAC Dimmable Product

To establish smart city operation, energy conservation and environmental protection.

Optional light distribution curve available with optics Type I (S/M/L), Type II (S/M/L), Type III (S/M/L).

Lamp breather ensures air balance inside and outside of the luminaire which improves the street lights’ service life.

Lamp will automatically turn on and off according tolux difference.

Adjustable bracket for horizontal or vertical installation

B. Wireless control system available

D. Modular LED lens design

E. Imported Breather available

C. Photocell available

Easy disassembly for reduced maintenance costs.

F. Detachable connect base available

Extends the lifetime of the productwhile also protecting the driver and the luminaire from lightnings.

G. Surge Protection Device available

When the luminaire is opened for maintance, the power will be cut off automatically to ensure the safety of the maintenance personnel.

H. Power Turn Off Protector available

I. Adjustable bracket available

A variety of drivers are available.

A. LED Power Supply

A q u i l a S t r e e t L i g h t

Tempered glass with 94% lighttransmittance

High product reliability by applying 13 steps painting proccess

High intensity die-cast aluminumbody with an IK08 impact grade and tempered glass cover rated IK08.

High efficiency coating. Paint and metal parts succefully passed the 500 hours salt spray test.

Modular optical lens design, easy to upgrade in the future.

Advantages

Detachable design and use of fast turn off power protector render this luminaireconvenient and safe for maintenance.

Metal Grey

Color Options

Black

10kV Surge Protection Device included.

Available with Electrical ProtectionClass I or Class II.

Features

Al-Si-Cu Alloy Die Casting Housing

● Impact level up to IK08

● Tensile strength reaches 288.3N/mm2

● IEC 62262;2002

● Protection level of outer shell for external mechanical collision● Stainless steel screws● Structure allows air flow through heat sink for optimum heat management

Double lamp body protection

- Super Toughened glass● Toughened 3N/cm

● Internal parts ● Surface stress resistance α≥87Mpa

● Anti-aging ability

● Anti-aging

● Special optic lenses provide light uniformity and optimizes the lamp’s light distribution and efficiency

● Anti-ultraviolet radiation142º C High temperature resistance-110º C Low temperature resistance

Professional PC optical lens module

Clip-on design, makes lamp easy to install, maintain and replace.

The adjustable bracket allows horizontal or vertical installation.

Bracket bent angle range: -15° to +15° Bracket bent angle range: -15° to +15°

Vertical installationHorizontal installation

15°

15°

15° 15°

Aquila Series - Models

Pole Selections

Installation

S Model 26W/40W/45W/50W Top view Side view

M Model 60W/80W/100W/110W Top view Side view

L Model 120W/150W Top view Side view

G Model 160W/200W/240W Top view Side view

40W/45W/50W/60W

26W/40W/45W26W/40W/45W/50W

100W/110W/120W/150W/160W12m

10m

8m

6m

4m

150W/160W/200W/240W

40W/45W/50W/60W

60W/80W/100W/110W

Features & Certificates Product ParameterSpecifications

Driver Brand

LED ChipItem No. Power Voltage PF CCT CRI Beam Angle Lm/W

Light Distribution Diagram

Dimensions

Operating Temperature

Smart Control Options

IES Files

Installation Options

Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

437.7mm 639.88mm

356.9mm 706.9mm

87.4

mm

93.1

3mm

154.

6mm

492.9mm

392.1mm

91.2

mm

204.

8mm

514.48mm

407.85mm

96.8

9mm

Inst. pipe diameter: Ø42-50mm Inst. pipe diameter: Ø42-60mm Inst. pipe diameter: Ø42-60mm Inst. pipe diameter: Ø42-60mm

Bridgelux 5050 / 3030

Die cast aluminum &Tempered glass

155Lm/W

IP66

10yrs Warranty

7yrsWarranty

5yrsWarranty

LM80 18000hrs

IK08 500hrs Salt Spray

Test

Moso/Philips

Available

Grey/Black

Vertical Pole/Horizontal Pole

-40°C ~ +50°C

Wireless Control System/ Photocell/Dimming

A q u i l a S e r i e s

adjustable bracket

Available Accessories

- 90° Adjustable bracket- Photocell- 5-pin and 7-pin NEMA receptacle- Breaker- Vent

PWM

- 10KV Surge protection device included- Non-flickering driver

Extra Features

1-10V

845837

845306

845843

845308

845310

845312

845314

846538

845318

845320

845322

845324

845326

26W

40W

80W

160W

60W

150W

240W

45W

50W

100W

110W

200W

AC100-277V 3000K/4000K/5000Κ/6500K

>70>0.92

120W

Type I S/M/LType II S/M/LType III S/M/L

155Lm/W

26W/40W/45W/50W 60W/80W/100W/110W 120W/150W 160W/200W/240W

250m

m

274.

83m

m

1 2


Optional light distribution curve available with optics Type I (S/M/L), Type II (S/M/L), Type III (S/M/L).

Lamp breather ensures air balance inside and outside of the luminaire, thus improving the street lights’ lifetime.


Easy disassembly for reduced maintenance cost.

Extends the lifetime of the productwhile also protecting the driver and the luminaire from lightnings.

When the luminaire is opened for maintance, the power will be cut off automatically to ensure the safety of the maintenance personnel.

B. Wireless control system available


E. Imported Breather available

C. Photocell available

F. Detachable connect base available

G. Surge Protection Device

H. Power Turn Off Protector available


A. LED Power Supply

A t l a s S t r e e t L i g h t




High efficiency coatings. Paint and metal parts succefully passed the 500 hours salt spray test.


10kV Surge Protection Device included.

Advantages


Metal Grey

Color Options

Black

Available with Electrical ProtectionClass I or Class II.

Features


● Impact level up to IK08● Tensile strength reaches 288.3N/mm2

● GB/T 20138-2006/IEC 62262;2002 Protection level of outer shell for external mechanical collision


-Super Toughened glass

● Toughened 3N/cm

● Internal parts ● Surface stress resistance α≥87Mpa


● Anti-aging● Anti-ultraviolet radiation

142º C High temperature resistance-110º C Low temperature resistance


Clip-on design, makes luminaire easy to install, maintain and replace.

The adjustable bracket allows horizontal or vertical installation.

Horizontal installation Vertical installation Bracket Tilt Angle range: -15° to +15°

15°

15°

Atlas Series - Models

Installation

S Model 40W/50W Top view Side view

Mn Model 26W Top view Side view

M Model 60W/80W Top view Side view

L Model 100W/120W Top view Side view

G Model 160W/200W/240W Top view Side view

120W/150W/160W/200W

150W/160W/200W/240W

50W/60W/80W/100W

80W/100W/120W/150W

26W/40W/50W

40W/50W/60W

40W/50W

12m

10m

8m

6m

4m

Pole Selections


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

Bridgelux 5050 / 3030


IP66

10yrs Warranty

7yrsWarranty

5yrsWarranty

500hrs Salt Spray

Test

LM80 18000hrs

IK08

Moso/Philips

Available

Grey/Black


-40°C ~ +50°C


A t l a s S e r i e s


- Photocell- 5-pin and 7-pin NEMA receptacle- Breaker- Vent

- 10KV Surge protection device included- Non-flickering driver

Extra Features

PWM1-10V

155Lm/W 160Lm/W

845334

846543

845336

845338

845340

845342

845344

845346

845350

845348

40W

26W

80W

240W

60W

200W

120W

50W

100WAC100-277V 3000K/4000K/

5000Κ/6500K >70>0.92

160W

Type I S/M/LType II S/M/LType III S/M/L

155Lm/W

160Lm/W

A

C

B

Installation pipe diameter: Ø42-60mm

mm

477 218 118477 279 118538 279 118630 279 118798 402 130

mm mm

A B CWattage

26W40W/50W60W/80W100W/120W160W/200W/240W

1 8


Optional light distribution curve available with T2-1, T3-1, TS-1 easy to replace in the future.


Lamp breather ensures air balance inside and outside of the luminaire which improves the street lights’ service life.



To provide a reliable guarantee for LED drive power, extend the life of theproduct and protect from lightnings.

When luminaire is opened for maintance, the power will be cut off automatically to protect the safety of maintenance personnel.

A

A. Wireless control system available


B. LED Power Supply

E. Imported Breather

C. Photocell Available

F. Detachable connect base

G. Surge Protection Device

H. Power Turn Off Protector

F

B G

C

H

D

E

Metal Grey

Color Options

White BlackPearl Powder




High efficiency coatings. Paint and metal parts succefully passed the 600 hours salt spray test.


Clip-on design, makes lamp easy to install, maintain and replace.


With surge protector device, the luminaire can reach Class I (10KV) or Class II (5-9KV).

O r i o n 7 S e r i e s

Advantages

Back Angle: 0º, +5º, +10º, +15ºBent Angle: 0º, -5º, -10º, -15º

Back Angle: 0º, +5º, +10º, +15º

Horizontal installation

Vertical installation

12m

10m

8m

6m

4m

53W/88W/117W/155W

117W/155W/210W

32W/42W

32W/42W/53W/88W

15º

15º

15º

● Anti-aging● Anti-ultraviolet radiation

142º C High temperature resistance-110º C Low temperature resistance


● Impact level up to IK09

● Tensile strength reaches 288.3N/mm2

● GB/T 20138-2006/IEC 62262;2002 Protection level of outer shell for external mechanical collision


● Smooth surface for effective snow drainage● Seamless surface to ensure rainwater scouring


Double lamp protection

-Super Toughened glass -Super-tempered glass

● Toughened 3N/cm ● Internal parts ● Surface stress resistance α≥87Mpa


Installation

Pole Selections


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

25163

25178

25169

25184

28865

25181

25187

32W

88W

53W

155W

42W

117W

AC100-277V 3000K/4000K/6500K >70>0.90

130-135Lm/W

210W

50°x155°75°x155°68°x150°

A

mm

630

758878

266

332402

160

167182

mm

C

mm

B

A B C

Installation pipe diameter: Ø60mm for 32W-88W,Ø76mm for 117W-210W

120-125Lm/W

Osram/Seoul


120Lm/W


IP665yrs Warranty

IK09

Meanwell/Inventronics

Available

Grey/White/Black/Pearl


-30°C ~ +50°C



- 7-pin NEMA receptacle- Philips external Surge Protection Device

- Non-flickering driver

Extra Features

130Lm/W

Wattage

32W/42W/53W

88W117W/155W/210W

1-10V

2 4


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

842490

842505

842499

842511

842493

842508

842514

32W

88W

53W

155W

42W

117W

AC100-277V 3000K/4000K/6500K >70>0.90 135Lm/W

210W

50°x155°75°x155°68°x150°

A

A

mm

630

758878

266

332402

160

167182

B

mm

CC

mmWattage

32W/42W/53W

88W117W/155W/210W

Installation pipe diameter: Ø60mm for 32W-88W,Ø76mm for 117W-210W

B

Inventronics

Philips

-30°C ~ +50°C

Available

135Lm/W


IP665yrs Warranty

IK09

Grey/White/Black/Pearl





- 7-pin NEMA receptacle- Philips external Surge Protection Device


Extra Features

1-10V

2 6

Intelligent Control

Optic Lens

● Buckle for fixing heat sink could be opened without tools. ● There is a supporting bracket to hold upper and lower parts of fixture body, when electricians open for maintaining.

Avoids accumulation of dust, sand or other solid materials, minimizes environment impact on luminare performance.

Tool-free Open and Maintenance

Hinged cover can be opened without the use of tools.

Surge ProtectionEasy Replacement for LED Driver

Super Smooth Surface

Auto electrical disconection

Built-in circuit breaker, tool free electrical gear tray.

6kV line-to-line protection and 10kV line-to-earth protection

● Occupancy Sensor● Photocell● NEMA compatible

Optional light distribution curve available with Type II, Type III, Type IV, Type V. High permeability tempered glass is used to provide the best lumen output for the luminaire.

Black Silver

Advantages

Heavy duty die-cast aluminumhousing with IK10 and 3G vibration rating

Suitable for horizontal or vertical installation

Tempered glass cover

Level adjustable housing from -15° to +15°

Color Options

M i r a S e r i e s

UV stabilized polyester powder paint finish for durability and corrosion resistance.Additional color options available under special terms.

Hinged cover for tool-less and easy maintenance

Expertly engineered individual lenses made of ptical grade polycarbonate for maximum light intensity


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

AC100-277V 3000K/4000K/5000K/6500K >80>0.92

145Lm/W

130Lm/W

125Lm/W

155Lm/W

100°x145°/75°x150°/85°x150°

843636

843642

843648

843640

843646

843652

843638

843644

843650

20W

50W

90W

40W

75W

150W

30W

60W

120W

591mm 610mm

149mm 215mm

230mm 288mm

Installation pipe diameter:Ø55-60mm20W/30W/40W/50W/60W/75W 90W/120W/150W

M i r a S e r i e s

Meanwell/Philips

Philips Lumileds

-40°C ~ +50°C

0-10V/PWM/Resistance/DALI Dimming, PIR sensor, Photocell

Die-cast Alumimun &Tempered Glass

Silver/Black/Custom

Vertical or Horizontal

Available

125Lm/W 130Lm/W

DALI PWM

145Lm/W 155Lm/W

IP665yrs Warranty

IK0810yrs Warranty


- 7-pin NEMA receptacle - 10KV Surge protection device included- Non-flickering driver

Extra Features

1-10V

3 0

Mounting options and accessories

By rotating the lens, the light distribution changes direction.

Method A: Slip Fitter Method B: Adjustable Arm Mount Method C: U-shape Bracket

Method D: Direct Arm Mount (Square/Round pole)

for round pole for square pole

Advantages

G e m m a S e r i e s

Polycarbonate lens for maximum intensity.

Delivers improved visual comfort by lower glare and providing a wider, smoother and more formed light.

Cut-off light, no uplight pollution.

External fins to ensure greater heat dissipation

Black Dark Bronze

Color Options

White Metal Grey

High intensity die-cast aluminum body with impact grade that reaches IK08

SPD: 6kV line-to-line protection and10kV line-to-earth protection

Equiped with hinges that allow tool-freedriver panel access

Adjustable light distribution


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

A

B

C

Installation pipe diameter: Ø60mm

843654

843658

843662

843666

843670

843674

AC100-277V 3000K/4000K5000K/6500K

>80>0.95 135Lm/W/165Lm/W

75°x150°/85°x150°/155°x155°

75W

115W

145W

180W

200W

230W

A

mm

600

694

270

350

78

78

75W/115W/145W

180W/200W/230W

B

mm

C

mmWattage

G e m m a S e r i e s

IP6610yrs Warranty IK085yrs

Warranty

135Lm/W 165Lm/W

Inventronics

Philips Lumileds

0-10V/PWM/Timer Dimming, Photocell & PIR sensor

Die-cast Aluminum & PC

Black/Bronze/White/Metal grey

Horizontal/vertical installa-tion for round/square pole

Available

-20°C ~ +45°C

PWM


- 20KV Surge Protection Device- 7-pin NEMA receptacle- Brackets, Mounting arms & Slip fitters

- 10KV Surge Protection Device included- Non-flickering driver

Extra Features

1-10V

3 4

20°

20°

The color of the photocell can be varied.

Advantages

S a r i n S e r i e s

Accessories

843868Surge protection

device

843869 Adjustable arm

843870 Photocell


Elegant, streamlined design


Adjustable arm with +/- 20° bent angle

Surge protection device and photocell cap available

Anti-static & thermostable housing with anti-corrosion treatment

Rotational range

Open Optic lens

Shorting cap or photocell option


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Str

ee

t Li

gh

ts

AC100-277V 3000K/4000K/5000K/5700K 80/90>0.90 150Lm/W

Type IIType IIIType IV-M

843828

843834

843840

843846

843852

843858

843864

40W

60W

80W

100W

120W

150W

200W

A

mm

527593693

240

295304

135

170145

40W/60W

80W/100W/120W150W/200W

B

mm

C

mmWattage

A

B

CInstallation pipe diameter: Ø60mm

S a r i n S e r i e s

150Lm/W

7yrs Warranty

IK08IP66

Sosen/ Meanwell

Philips 3030

1-10V/DALI Dimming, Photocell,

Aluminum &Tempered glass

Grey

Horizontal or vertical installation

Available

-30°C ~ +45°C

Extra Features Available Accessories

- 3 or 7-pin NEMA receptacle- Adjustable pole mounting adaptors


DALI1-10V

3 8

Dim down to 25% of its dimming

capacity when there is no motion

Light up to its full capacity

when there is motion

OFF at daytime ON at nightime

M i r a S o l a r S e r i e s

Metal Grey

Color Options

Black

Advantages

All-In-One Intergrated design: Solar panel fully intergrated into the fixture.

Simple Installation: No separate battery pack or compicating wiring installation required. All components can be easily replaced.

Smart Control: efficient controller, dimming (timing + power dimming), motion sensor, PIR sensor

Monocrystalline Solar Module and lithium iron prosphate battery

Super High Efficiency of 170LM/W in all wattage options.

Rotating arm: It can be adjusted in multiple angles

Suitable for installing in different latitudes and compined with different forms of lamp posts.

Motion Sensor

Time Sensor


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

So

lar

Str

ee

t Li

gh

ts

843710

843710 843719

843713

843716

843719

843722

843725

10W

15W

20W

25W

30W

40W

AC/DC12V3000K/4000K/6500K >70/ 170Lm/W

150x60°/150x75°

12.8V/12Ah 12.8V/18Ah18V/17W 18V/45W

12.8V/18Ah 12.8V/24Ah18V/35W 18V/70W

12.8V/12Ah 12.8V/24Ah18V/29W 18V/60W

Solar Panel & Battery Information

Item No. Item No.Lithium iron Phosph. Battery

Lithium iron Phosph. BatterySolar Panel Solar Panel

843713 843722

843716 843725

A

mm

643893

11891033

12831283

300300

300300

360430

8282

8282

8282

10W15W

25W20W

30W40W

B

mm

C

mmWattage


A

C

B

M i r a S o l a r S e r i e s

170Lm/W

3yrs Warranty

IP65 IK08

Die-cast Aluminum & PC

Grey/Black

Horizontal Pole

Available

-30°C ~ +50°C

Philips Lumileds

/

Adjustable arm &Motion Detector

4 2

Dim down when there is no motion

Light upwhen there is

motion

240°

360°

A t r i a S o l a r S e r i e s

Advantages

Omni Directional: solar panel supports 360° horizontal rotation and 240° vertical tilt, improving system efficiency.

Smart Controls: remote control, dimming (timing & power dimming), motion sensor and PIR sensor available.

High Efficiency: 150LM/W system efficiency in all wattage options.

A mobile application is designed for controling and motitoring the lights through Bluetooth connection.

Monocrystalline Solar panel module and lithium ion battery

Integrated optical les for durability and excellentlight transmittance

Motion Sensor

Rotational range


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

So

lar

Str

ee

t Li

gh

ts

844460

844460

844463

844463

844466

844466

844469

844469

30W

40W

50W

60W

DC12V 3000K/4000K/6500K >70>0.95 150Lm/W150°x65°

AC

B

S1

S2

12V/24Ah18V/60W 780x513x30mm

755x670x30mm12V/33.6Ah

5yrs 25yrs

12V/38.4Ah18V/80W

12V/28.8Ah

Solar Panel & Battery Information

Item No. Li-ion Battery Warranty WarrantySolar Panel Solar Panel Size


150Lm/W

5yrs Warranty

IP66 IK08

Aluminum, PC & Tempered Glass

Grey

Pole mounted

Available

-30°C ~ +65°C

/

N/A

PIR Sensor, MPPT Solar controller, Mobile app control

A t r i a S o l a r S e r i e s

A

mm

640640

775260

750260

508250

665250

30W/40W

50W/60W

S1(w/o frame)

B

mmmm

S2(w/o frame)

C

mmmmWattage

4 6

G e m m a S o l a r S e r i e s

Advantages

Ultra High Efficiency: 200LM/W to 220LM/W system efficiency in all wattage options.

Smart Controls: remote control, dimming, built-in PIR/microwave motion sensor and smart controller.

Works in AC and DC voltage equally. USB power and alarm supply in emergency function.

Bifacial solar panels, which increase the overall conversion efficiency by 30%.

Rotatable 300° LED module to adapt to any light angle.

Easy battery replacement and anti-theft technology.

Anti-corrosion tested die-cast aluminum body with impact grade that reaches IK07.

A mobile application is designed for controling and motitoring the lights through Bluetooth connection.

Monocrystalline Silicone Solar panel and Lithium Iron Phosphate Battery

PIR/microwavesensor

Solar panel

Battery

Battery case(Anti-theft

mechanism)

Bracket

Spikes to keep birds away

RotatableLED module

SensorPower switch

Charging port

USB

Upgrade port

LEDs

LED case

LED protection

Features

All-In-One Intergrated design: Solar panel intergrated into the fixture.

Rotating arm: It can be adjusted in multiple angles

Universal Wall mounting For round pole For square pole

Bracket options

Internal structure

Dim down to 0%-30%

of its dimming capacity when

there is no motion

Light up to its full capacity

when there is motion

Gemma Solar Series - Models

Mn Model 10W/15WLEDs: 32 pcs Length: 633 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 3-6 m

S Model 20W/25WLEDs: 32 pcs Length: 793 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 5-7 m

M Model 30W/35WLEDs: 64 pcs Length: 948 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 5-8 m

G Model - 50WLEDs: 64 pcs Length: 1263 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 6-10 m

J Model - 60WLEDs: 96 pcs Length: 1418 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 7-12 m

L Model - 40W/45WLEDs: 64 pcs Length: 1103 mm Width: 365 mm Height: 211 mm Installation pipe diameter: 60 mm Installation height: 6-9 m

Rotational range

Motion Sensor

300°

90°


Driver Brand

LED ChipItem No.


Dimensions



Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

So

lar

Str

ee

t Li

gh

ts


IES Files

Power Lm/W Solar PanelLiFeP04 BatteryBeam AngleCRICCTVoltage

DC12-24V3000K/4000K/6500K

>70

220Lm/W18V/30W

215Lm/W

200Lm/W18V/50W

205Lm/W

210Lm/W 18V/40W

210Lm/W

18V/60W

200Lm/W 18V/70W

210Lm/W 18V/80W

Type IIType IIIType IV

846646

846649

846652

846655

846658

846667

846661

846670

846664

846673

10W 153.6W/12V

15W 154W/12V

20W 230.4W/18V

25W 230W/18V

30W 307.2W/24V

45W 380W/30V

35W 308W/24V

50W 460.8W/36V

40W 384W/30V

60W 537.6W/42V

200Lm/W 210Lm/W 220Lm/W

3yrs Warranty

IP65 IK07

Die-cast aluminum

Grey

Available

-40°C ~ +50°C

Philips Lumileds

/

PIR/microwave sensor, Smart controller

G e m m a S o l a r S e r i e s

A

mm

633793

1103948

12631418

365365

365365

365365

211211

211211

211211

10W/15W20W/25W

40W/45W30W/35W

50W60W

B

mm

C

mmWattage


Horizontal/ Vertical instal-lation on round or square pole/ Wall mounted

A

B

C5 2


Optional light distribution curve available with T2-1, T3-1, TS-1 easy to replace in the future.

A variety of power drivers are available



To provide a reliable guarantee for LED drive power, extend the life of theproduct and protect from lightnings.

Built-in circuit breaker that activates when luminaire is opened for maintance, to protect theelectricians’safety.

A

A. Wireless control system available


B. LED Power Supply

E. Photocell Available

G. Detachable connect baseC. Surge Protection Device

F.Auto electrical disconection

E

B

F C

G

D

Advantages

Optical PC cover, resistant against hightemperatures, aging and ultraviolerradiation

High intensity die-cast aluminumbody with impact grade thatreaches IK09

Modular optical lens design,easy to improve in future

Clip-on design, makes lamp easy to install, maintain and replace

Detachable design and use of fastturn off power protector renderthis luminaire convenient and safefor maintenance

With surge protector device,the luminaire can reach Class I (10KV) or Class II (5-9KV)

O r i o n P a r k S e r i e s

Color Options

Metal Grey Black

Pole color and design can be customized under special terms.


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

Ø496mm

AC100-277V 3000K/4000K/6500K

>70>0.90 100Lm/W33°x159°40°x159°150°

25190

25196

25193

30W

90W

60W

650mm


/

Osram

Die-cast aluminum & PC

Metal Grey/Black

Post-top mounting

Available

100Lm/W

O r i o n P a r k S e r i e s I

IP665yrs Warranty

IK09

-35°C ~ +50°C



- Surge Protection Device - Non-flickering Driver

Extra Features

5 6


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

AC100-277V 3000K/4000K/6500K

>70>0.90 65Lm/W120°843898

843901

30W

60W


470mm

Ø400mm

O r i o n P a r k S e r i e s I I

65Lm/W

IP655yrs Warranty

Inventronics

Osram

Pole mounted

Available

Silver Grey

-35°C ~ +50°C

Die-cast aluminum & PC

/

5 8

Method A: Cable suspended

Method B: Side entry

Method C: Post top

Advantages

M i r a P a r k S e r i e s

Silver Grey

Color Options

Multiple mounting options: Cable suspended, side entry and post top installation.

Smooth surface housing with UV stabilized polyeaster powder paint finish for durability and corrosion resistance.


Weather-tight design and 3G Vibration ratingensure durability even in harsh environments.

Expertly engineered individual lenses made of optical grade polycarbonate for maximum light intensity, with tempered glass cover to protectthe optics.

Delivers improved visual comfort by lower glareand providing a wider, smoother and moreuniform light.

Mounting options


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts


AC100-277V 3000K/4000K/5000K/6500K >80>0.95 125Lm/W145°

843681

843687

843690

843684

25W

75W

120W

50W

Ø460mm 80mm

M i r a P a r k S e r i e s

Meanwell ELG/Philips Xi

Philips Lumileds

1-10W/PWM/Timer Dimming, 3 Timer Modes, Photocell, Sensors

Suspended,Pole mounted

Available

125Lm/W

IP65 IK085yrs Warranty

Silver Grey

-40°C ~ +50°C

Die-cast aluminum &Tempered glass

PWM


- 10KV or 20KV Surge Protection Device- 7-pin NEMA receptacle

- Non-flickering Driver

Extra Features

1-10V

6 2

8-LED 12-LED 16-LED 20-LED 24-LED

● NEMA compatible

S a t u r n P a r k S e r i e s

High pressure die cast aluminum housing withanti-UV powder coating for durabilityand corrosion resistance.


Easily accessible driver compartment

Advantages

Housing options

LEDs arrangement

Easy driver maintenance Intelligent Control


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

843905

843923

843929

843911

843917

20W

45W

55W

29W

38W AC120-277V >70>0.9 100Lm/W135°x45°135°x135°

30000K/4000K5000K


550mm 550mm Ø550mm

Ø206mm

S a t u r n P a r k S e r i e s


100Lm/W

Cree

1-10V/DALI Dimming, Photocell

Pole mounted

Available

Black

-30°C ~ +50°C

Aluminum & PC

Inventronics/ Philips


- 7-pin NEMA receptacle - 10KV Surge Protection Device included- Non-flickering Driver

Extra Features

DALI1-10V

6 6

LEDs are placed on the upper part of the lamp

P e g a s u s P a r k S e r i e s

Advantages

High intensity die-cast aluminum bodywith impact grade that reaches IK09

Intergrated Driver

Various light distribution options for symmetric or asymmetric lighting effect


Internal structure

LEDs arrangement


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

487mmØ430mm

844471

844483

844475

844479

25W

60W

35W

45WAC120-240V >70>0.95 135Lm/W80°x157°3000K/4000K/

5000K/5700K


P e g a s u s P a r k S e r i e s


135Lm/W

Osram

Pole mounted

Available

Black

-40°C ~ +45°C

Aluminum & PC

Inventronics/ Osram

Extra Features

- 10kV Surge Protection Device included- Non-flickering Driver


- 7-pin NEMA receptacle- 20kV Surge Protection Device

DALI

1-10V/DALI Dimming, Photocell, Timer dimming

1-10V

7 0


Method A: Post top

Method B: Mast/Column arm

Method C: Cable suspended

A u r o r a P a r k S e r i e s

Advantages

Multiple mounting options: Cable suspended, mast/column arm entry and post top installation.



Various light distribution options for symmetric or asymmetric lighting effect


Easy driver maintenance

LEDs arrangement

Mounting options


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

844487

844499

844503

844507

844491

844495

18W

45W

65W

80W

25W

35WAC120-240V >70>0.95 125Lm/W150°x80°3000K/4000K/

5000K/6500K

681mm

514mm


A u r o r a P a r k S e r i e s


125Lm/W

Samsung

1-10V/DALI Dimming, Photocell, Timer dimming

Available

Black

-40°C ~ +45°C

Aluminum & Temp. Glass

Inventronics/ Osram


DALI

Extra Features

- 10kV Surge Protection Device included- Non-flickering Driver


- 7-pin NEMA receptacle- 20kV Surge Protection Device

1-10V

7 4


V e n u s P a r k S e r i e s

Advantages

Color Options

Elegant design available in two colours.

Smooth polyester powder coated housingand UV-resistanr PC diffuser.

High intensity die-cast aluminum body withimpact grade that reaches IK10.

GoldenWhite

Designed to light parks, squares and pedestrian areas it incorporates direct & indirect lighting photometry.

LEDs arrangement

Color options


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

AC200-240V

AC120-277V

3000K/4000K/5000K >70>0.95 100Lm/W135°x45°/

135°x135°

843934

843944

843950

843938

20W

55W

73W

38W


730mm

Ø460mm

Inventronics/ Philips/ Osram

Cree

1-10V/DALI Dimming

Pole mounted

Available

White/ Golden

-30°C ~ +50°C

Aluminum & PC


100Lm/W

V e n u s P a r k S e r i e s

DALI1-10V

7 8

● Smooth surface to avoid dust & dirt accumulation● Seamless surface to ensure rainwater scouring● Avoids accumulation of leaves, sand or other solid materials, minimizes environment impact on luminare performance.

H a l o P a r k S e r i e s

Advantages

Elegant design, ideal solution for parks, public squares, playgrounds and pathways.

Smooth surface housing with UV stabilized polyester powder paint finish for durability and corrosion resistance.

High intensity die-cast aluminum housing with anti-corrosion treatment

Super High Efficiency of 160LM/W in all wattage options.

High efficiency coatings. Paint and metal parts succefully passed the salt spray test.

Smooth Surface

LEDs arrangement Water resistance


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Pa

rk L

igh

ts

845471

845480

845483

845486

845474

845477

50W

150W

200W

240W

80W

100WAC180-277V >80>0.95 160Lm/W60°/90°/120°2700K/4000K/

6500K

50W/80W/100W/150W 200W/240WInstallation pipe diameter:<Ø60mm

162mm 168mm

Ø380mm Ø500mm

IP665yrs Warranty

-40°C ~ +60°C

Philips Lumileds

Meanwell

1-10V/DALI Dimming

Aluminum

Available

Pole mounted

Grey 160Lm/W

DALI1-10V

H a l o P a r k S e r i e s8 2

Method A.

Method B.

Method C.

Method D.

Metal Grey

Color Options

White BlackPearl Powder

Advantages

Tempered glass with 94% lighttransmittance and IK08 impact grade

High intensity die-cast aluminumbody with impact grade thatreaches IK09

Modular optical lens design,easy to improve in future

Clip-on design, makes lamp easy to install, maintain and replace

O r i o n H a n g i n g S e r i e s

Detachable design and use of fastturn off power protector renderthis luminaire convenient and safefor maintenance

With surge protector device,the luminaire can reach Class I (10KV) or Class II (5-9KV)

Mounting options


Driver Brand



Dimensions



IES Files


Color

Material

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

0

30

60

90-90

-60

-30

120

150

-/+180

-150

-120

Type 0

Type II-M

Type I-S

Type II-L

Type I-M

Type III-S

Type I-L

Type III-M

Type II-S

Type III-L

Ha

ng

ing

Str

ee

t Li

gh

ts

25018

25064

25042

60W

120W

90W AC100-277V 3000K/4000K/6500K

>70>0.90 100Lm/W80°x150°

Ø500mm 276mm

O r i o n H a n g i n g S e r i e s

Inventronics

Osram

1-10V/DALI Dimming


Available

100Lm/W


Metal/White/Black/Pearl

-35°C ~ +50°C

Die-cast aluminum &Tempered glass


- Surge Protection Device - Non-flickering Driver

Extra Features

DALI1-10V

8 6

Base station

→ Long range radio size of a regular photocell; no visible antenna

→ Compact NEMA, internal & decorative; all variants fixture independent

→ Fast and easy Utility-grade metering and GPS

→ Capacity 5,000 works without network

→ Low-cost internet connection

Telecell

→ Discreet size of a regular photocell; no visible antenna

→ Flexible NEMA, internal & decorative; all variants fixture independent

→ Accurate Utility-grade metering and GPS

→ Resilient

works without network

P l a n e t S y s t e m : I n t e l l i g e n t L i g h t i n g f o r S m a r t C i t i e s

Active network

Telensa’s PLANet system turns street lighting into an active network – a network in which switching can be controlled, faults reported, electrical properties interrogated and energy accurately measured. With a full range of devices the system can be applied to all types of lighting fixtures, new and old. It is the complete, modern tele-management tool for today’s street lighting industry.

Energy management and demand-side balancing

The principal requirement for street lighting today is to manage energy effectively. With flexible switching and dimming control and accurate energy measurement, the PLANet solution is an ideal platform for effective management of energy consumption across a whole lighting population. The system is an approved Elexon Central Management System (CMS), so savings in ener-gy consumption can be fully realized financially.

Operating efficiency

The PLANet system enables improvements in efficiency in all areas of operations and maintenance, so the lifetime cost of ownership of street lighting assets is min-imized. Monitoring enables shorter response and repair times, giving a higher level of efficiency and service to the public.

Cost effective solution

The PLANet package is cost effective in helping to protect against rising and increasingly uncertain costs in street lighting provision. The savings enabled by imple-menting the PLANet solution present a strong business case for widespread adoption.

Telecell devices contain:

1. a radio,2. a control processor,3. lighting control and4. monitoring circuitry together with an electricity meter chip.

Each Telecell unit is directly powered off the mains supply it is controlling, either from the NEMA socket or from the mains in the luminaire. There is a range of Telecell units for on/off switching and also dimming.

User interfaceUp to 150,000 lights as standard

Central system

Telecells (on streetlamps,

road signs and in bollards)

Base station1 per 5,000-10,000 lights

Light sensor

Antenna

Radio/Controller

Comprehensive control and monitoring

• Provides extremely flexible switching and dimming control• Allows for special events, days of the week variation and override switching• Enables switching at any daylight Lux level• Includes extensive monitoring of lamp/ballast electrical parameters and mains supply

Broad range of lighting equipment compatibilities

• Works with lamp types including SOX, SON, CDM/O, Cosmopolis, PLL, LED• Operates independently of ballast manufacturer• Supports ballast types such as magnetic or electronic HID ballasts and LED drivers• Enables dimming with 0-10V or DALI ballasts and to any 0-100% permissible power• Suits retrofit or new build deployments• Comprises four TELECELL unit variants for external or internal luminaire fitting

Advanced wireless technology platform

• Uses long range radio infrastructure: 1-3 miles urban and 3-6 miles rural range• Accommodates up to 10,000 TELECELL units per base station• Provides resilient connectivity through multi base station capability• Operates with fewer base stations resulting in a manageable deployment

Commercial and operational

• Realizes financial savings from energy reduction by being an Elexon approved CMS• Assists daily operations with powerful graphical user interface• Integrates into asset management systems via web services (XML) or CSV interfaces• Includes a range of commercial options such as hosted/managed service provision.

Luminaire componentsMain features of the Planet System

Energy reporting

Street light maintenance

Integration with asset management systems

Each TELECELL unit can measure an extensive range of parameters. Readings can be returned using programmed monitoring or ad hoc interrogation.

Measurable parameters include:

The first requirement in managing energy consumption is to be able to measure it accurately. Each TELECELL unit contains a metering chip so cumulative active energy is measured precisely for every fixture. This allows true energy consumption to be shown for any filtered set of lights for any calendar period.

Some of the measurable parameters can be used to generate faults or warnings. These are reported and summarized on a daily basis. On some parameters, thresholds can be set which, when triggered, can cause immediate alarms.

Lamp condition:

• Failure Cycling• Day burning

TELECELL unit:

• Temperature• Missing data (from loss of supply or communication)

Times:

• Switching cycles• Burn hours• BSCP event log

Energy:

• Active energy• Cumulative energy

Electrical:

• Instant power • instant current• Instant power factor• Average power• Average current• Average power factorMains supply:

• Instant voltage• Average voltage• Low voltage• Power cycles

With comprehensive monitoring capabilities, the PLANet system is an effective tool for improving and streamlining maintenance operations, resulting in a better lighting service for the public. The system contributes significantly to delivering an enhanced service by:

The PLANet system can be interfaced to asset management systems allowing the import and export of asset data and fault reporting and generate work orders from those systems. The interfaces range from simple CSV based file transfer to XML based web service interfaces to popular systems such as Mayrise and Pitney Bowes “Confirm”.

Reducing night maintenance inspections:

• Avoids patrolling in dangerous areas• Inspections can be less frequent and carried out in the day time

Fault diagnosis:

• Lamps: failure, cycling, day burning• Ballasts: power factor• Mains supply: power cuts, over voltage• Lost connection: internal wiring, column down

Bulk lamp change policies:

• prompt lamp failure detection means bulk change period can be extended, while maintaining overall outages levels within targets

Reducing repair times:

• Avoids time wasted between night inspections• Understanding lamp failures enables repair to be scheduled more quickly

Improving inventory:

• Monitoring reveals potential discrepancies in inventory

Extending range of information available:

• Mains supply profile• Maintenance operatives’ performance

Switching and dimming control is extremely flexible in the PLANet system. Lights are grouped according to their switching program. There is no limit on the number of groups and programs can be configured with a range of options.

Switching methods:

• by time e.g. 5pm• by solar calendar e.g. 10 min after sunrise• by light level e.g. 10 Lux• combination of these

Standard control programs:

• photocell• part night on/off• part night dim• fixed times

Custom control programs:

• up to 10 switching steps

Days of week control:

• e.g. different switching at weekends

Calendar control:

• special events• seasonal adjustments

Dimming control:

• With 0-10V or DALI ballasts• Dim to any level 0-100% (ballast permitting)

Trimming:

• Optimized/auto trim burning hours

Override:

• Quick switching changes across groups/whole population• respond to incidents• use for maintenance

Load reduction:

• Enables demand-side balancing

Examples:

ΟΝ ΟΝ

ΟFF ΟFF

Dim

12:00 12:0016:00 16:0020:00 20:0004:00 04:0008:00 08:00midnight midnight

Dusk20 Lux

Dusk70 Lux

Down35 Lux

Down5 Lux

Override

Street light monitoring and fault detectionStreet light control

12m

2.5m 14m

Lm [cd/m2] Uo UI TI [%] EIR≥1.50 ≥0.40 ≥0.70 ≤10 ≤0.35

11.2515

18.7520

22.5626.257.56

3.750

Type

III

10m

2.5m 10.5m 2.5m

Lm [cd/m2] Uo UI TI [%] EIR≥1.00 ≥0.40 ≥0.60 ≤15 ≤0.30

11.2515

18.7520

22.5626.257.56

3.750

Type

II

2.5m 7m

9m

2.5m

Lm [cd/m2] Uo UI TI [%] EIR≥1.50 ≥0.40 ≥0.70 ≤10 ≤0.35

11.2515

18.7520

22.5626.257.56

3.750

Type

I

The diagrams above show typical applications of light distribution’s Types I, II and III.- Lighting area width: 21m- Pole spacing: 30m

L i g h t D i s t r i b u t i o n T y p e s

Warranty Policy

Warranty for IINNO-Branded Professional LED LuminairesThis document sets out the warranty policy of IINNO from which you purchase your professional lunimaires.

Terms and Condition

1. This warranty is only applicable to IINNO branded lighting products sold by IINNO Limited (hereinafter referred to as ‘Product’).

2. The warranty is only applicable to the party purchasing the products directly from IINNO (Hereinafter referred to as ‘Purchaser’). Third party products sold by IINNO are not covered under this warranty. With respect to products sold to the Purchaser by IINNO, but not bearing the IINNO name or sub-brands, IINNO makes no warranty of any kind, express or implied, including, without limitation, any warranty of merchantability or fitness for a particular purpose, but will make available to the Purchaser upon request, but only to the extent permitted by law and relevant contracts, the warranties of the manufacturer of the relevant product.

3. No agent, distributor or dealer is authorized to change, modify or extend the terms of the warranty on behalf of IINNO.

4. IINNO warrants that each Product will be free from defects in material and workmanship. The foregoing warranty shall be valid for the period mentioned in the applicable warranty clause for the Products referred to in IINNO’s confirmation of your PI.

5. The warranty term starts from the production date printed on the products used in professional applications.

6. The warranty period is based on a burning behaviour of max. 4000 hours/year. In case of more than 4000 hours/year, the warranty period will be adjusted pro-rata.

7. This warranty only applies when the Product has been properly wired and installed and operated within the electrical values, operating range and environmental conditions provided in the specifications, application guidelines, IEC standards or any other document accompanying the Products.

Additionally, installation must be performed only by authorized personnel, who will establish that the above mentioned precautions will be taken under consideration.

8. This warranty does not apply to damage or failure to perform arising as a result of any Acts of God or from any abuse, existing local network (or Public grid) failure, misuse, abnormal use or use in violation of any applicable standard, code or instructions for use, including without limitation, those contained in the latest safety, industry and/or electrical standards for the relevant region(s).

9. IINNO reserves the right to the validity of a guarantee claim. For this purpose, the Purchaser must return, with sufficient postage, for analysis (enclosing a copy of the delivery note or the invoice).

10. Within the applicable warranty period and on examination IINNO determines to its satisfaction that such Product failed to satisfy this warranty, IINNO will, at its option, repair or replace the Product or the defective part thereof, or reimburse Purchaser the purchase price. For purposes of clarity, ‘repair or replace the Product or the defective part thereof’ does not include any removal or reinstallation activities, costs or expenses, including without limitation, labor costs or expenses.

11. If IINNO chooses to replace the Product and is not able to do so because it has been discontinued or is not available, IINNO may refund the purchaser or replace the product with a comparable product (that can show small deviations in design and product specification).

12. Warranty claims have to be reported and returned to IINNO office within 30 days after discovery, specifying at least the following information (additional information may be required on request):

Details of the failed Products; and for System warranties also details of other components used; Installation date and invoice date;

Detailed problem description, number and % of failures date-code of failure; Application, hours burned and number of switching cycles.

13. Where a warranty claim is justified, IINNO will pay for freight expenses. IINNO may charge Customer for returned Products that are not found to be defective or non-conforming together with the freight, testing and handling costs associated therewith.

14. The warranty and remedies contained in this warranty are the only warranties given by IINNO with respect the Products and are given in lieu of all other warranties, whether express or implied, including without limitation warranties of merchantability or fitness for a particular purpose, which warranties are hereby disclaimed.

15. These terms and conditions state IINNO’s entire liability and obligation to Purchaser and Purchaser’s sole and exclusive remedy in connection with defective or non-conforming Products supplied by IINNO to Customer, whether or not such damages are based on any warranty not explicitly mentioned in these terms and conditions, tort, contract or any other legal theory, even if IINNO has been advised or is aware of such defects.

16. This is a limited warranty and excludes, among other items, installation, providing access to products (scaffolding, lifts, etc.), and special, incidental and consequential damages (such as loss of revenue/profits, damage to property or other miscellaneous costs not previously mentioned), and is further defined by the limitations and conditions set forth in the respective warranty policy and these terms and conditions.

17. Upon request, IINNO’S representatives shall be allowed access to the defective Product, system or application for verification of non-compliance.

18. IINNO cannot be held liable for electrical supply conditions, including supply spikes, over-voltage/under-voltage and Ripple Current control systems that are beyond the specified limits of the products and those defined by relevant supply standards (e.g. EN 50160 norms).

iinno light

iinno light

iinno light

www.iinno-lighting.com

iinno_light

Contact Us

IINNO Intelligent Innovations

Unit 04-05, 16th Floor,The Broadway No. 54-62 Lockhart Road,Wanchai, Hong KongTel: +852 8191 2170, +86 (0)769 23010151/2Email: [email protected]

IINNO Intelligent Innovations

80, Iroon Polytechneiou Str.73100 Chania, Greece Tel: +30 28210 27539 Mob: +30 6977656763 Email: [email protected]

CONTENTS · duration of the warranty period. The FCC Declaration of Conformity or the FCC mark is a...

Documents

Transcript of CONTENTS · duration of the warranty period. The FCC Declaration of Conformity or the FCC mark is a...