Contents Canalis KN -...

139

Canalis KNContents

Index 3Introduction 8Design guides and characteristics 29Canalis KDP 57Canalis KBA and KBL industrial luminaires 85Canalis KBB 113

Presentation Canalis KN 140For low-power distribution from 40 to 160 A 140

Description Canalis KN, 40 to 160 A 144Low-power distribution 144

Catalogue numbers Dimensions Canalis KN, 40 to 160 A 150Busbar trunking for low-power distribution 150Complementary products 15216 to 32 A tap-off units for modular devices 15663 A tap-off units for modular devices 15732 A tap-off unit, with power sockets protected by modular devices 15832 A tap-off unit, for power sockets protected by modular devices 15916 to 25 A tap-off units for NF fuses 16050 A tap-off units for NF fuses 16116 to 20 A tap-off units for BS fuses 16232 A tap-off units for BS fuses 16316 A tap-off units and 25 to 50 A tap-off units for DIN fuses 164Tap-off units equipped with a surge arrester 165Accessories 167

Installation Canalis KN, 40 to 160 A 168Busbar trunking for low-power distribution 168Installation scenario 168Assemby of trunking components 172

Canalis KS 175Canalis KS riser 229Canalis KT 253Technical specifications 259Maintenance 267Recommendations for special applications 273Catalogue numbers 309Canalis worldwide 315

DEBU022EN_KN_contents Version : 2.0 03/10/2011

K06E11000Version : 3.0 03/10/2011140

Canalis KNFor low-power distribution from 40 to 160 A

Presentation

1. Run components 2. Feed units and end covers

b Rating: 40, 63, 100 and 160 A.b 4 live conductors.b Length:v Basic components: 3 metres.v Additional lengths: 2 and 3 metres.

b The feed units delivered with end covers, receive the cables supplying one end or any other point of Canalis KN trunking.

PD

2021

98.e

ps

PD

2021

99_r

.eps

3. Fixing system 4. Tap-off units

b The fixing system ensures that Canalis KN is well secured, whatever the type of building structure.

b The tap-off units (with and without isolators) are used to:v supply loads from 16 to 63 Av or protect nearby loads against overloads due to lightning strikes

b Protection using modular circuit breakers or fuses.

DB

4036

67.e

ps

PD

2022

01_r

.eps

PD

2022

02_r

.eps

K06E11000 Version : 3.0 03/10/2011 141

3. Fixing system 4. Tap-off units

b The fixing system ensures that Canalis KN is well secured, whatever the type of building structure.

b The tap-off units (with and without isolators) are used to:v supply loads from 16 to 63 Av or protect nearby loads against overloads due to lightning strikes

b Protection using modular circuit breakers or fuses.

DB

4036

67.e

ps

PD

2022

01_r

.eps

K06E11000Version : 3.0 03/10/2011142

Canalis KN For low-power distribution from 40 to 160 A

Presentation

Excellent contactContacts are silver-plated. The level of performance remains the same throughout the life of the product.

A complete range of tap-off unitsb The range covers all needs from 16 to 63 A.b Protection is possible using circuit breakers, fuses or SPD (Surge Protection Device).b Also available are tap-off units equipped with household and industrial power sockets.

P10

1001

8.ep

s

DD

2021

72.e

ps

DD

2021

42_r

.eps

DD

2021

43_r

.eps

DD

2021

44_r

.eps A high degree of protection

The high degree of protection for Canalis KN means it can be installed in all types of buildings.b IP55 guarantees trunking protection against splashes, dust.b IK08 guarantees the strength of the trunking (resistance to shocks).b IPxxD ensures totally safe working conditions for maintenance personnel.b Canalis KN complies with sprinkler tests, guaranteeing operation under vertically and horizontally sprayed water for 50 minutes.

Unmatched upgrading possibilitiesTap-off outlets are positioned every 0.5 metres to ensure availability of an outgoer as close as possible to loads throughout the life of the installation.Tap-off units can be added or removed on live installations, without interrupting the supply to the other loads.

DD

2057

61.e

ps

DD

2057

62.e

ps

No toxic emission in case of fireAll components in the KN range are halogen free.In case of fire, Canalis KN releases very small quantities of smoke and no toxic gases.

DD

2021

41_r

.eps Total safety

An interlocking device prevents mounting errors and makes it impossible to install or remove an energised tap-off unit.

DD

2021

45_r

.eps

PD

2020

79_r

.eps

K06E11000 Version : 3.0 03/10/2011 143

Excellent contactContacts are silver-plated. The level of performance remains the same throughout the life of the product.

A complete range of tap-off unitsb The range covers all needs from 16 to 63 A.b Protection is possible using circuit breakers, fuses or SPD (Surge Protection Device).b Also available are tap-off units equipped with household and industrial power sockets.

P10

1001

8.ep

s

DD

2021

72.e

ps

DD

2021

42_r

.eps

DD

2021

43_r

.eps

DD

2021

44_r

.eps A high degree of protection

The high degree of protection for Canalis KN means it can be installed in all types of buildings.b IP55 guarantees trunking protection against splashes, dust.b IK08 guarantees the strength of the trunking (resistance to shocks).b IPxxD ensures totally safe working conditions for maintenance personnel.b Canalis KN complies with sprinkler tests, guaranteeing operation under vertically and horizontally sprayed water for 50 minutes.

Unmatched upgrading possibilitiesTap-off outlets are positioned every 0.5 metres to ensure availability of an outgoer as close as possible to loads throughout the life of the installation.Tap-off units can be added or removed on live installations, without interrupting the supply to the other loads.

DD

2057

61.e

ps

DD

2057

62.e

ps

No toxic emission in case of fireAll components in the KN range are halogen free.In case of fire, Canalis KN releases very small quantities of smoke and no toxic gases.

DD

2021

41_r

.eps Total safety

An interlocking device prevents mounting errors and makes it impossible to install or remove an energised tap-off unit.

DD

2021

45_r

.eps

K06E12000Version : 3.0 03/10/2011144

Description

IP55Ue = 230...500 VRAL 9001 white

DD

2101

83.e

ps Canalis KN is designed for low-power distribution. There are two versions:b Canalis KNA: busbar trunking with four live conductors (3L + N + PE), for distribution up to 160 A,b Canalis KNT: identical to KNA, but equipped with a transmission bus with three 2.5 mm2 conductors (except 160 A). This bus can be used to set up simple control/monitoring systems (lighting or other loads).The degree of protection of KNA and KNT trunking is IP55.All the insulating and plastic materials are halogen-free and have enhanced fire-withstand capabilities b incandescent wire test as per standard IEC 60695-2:v 960°C for components in contact with live parts,v 650°C for other components.

Straight lengthsCarry the current and supply low-power loads. Straight lengths constitute the basic structure of the line and are made up of:1 a carrier casing, crimp closed, made of hot-galvanised sheet steel, pre-lacquered RAL 9001 white. This rail also acts as the protective earth

conductor (PE),2 an insulated mounting casing, supporting the live conductors,3 four live aluminium conductors, equipped with silver-plated aluminium/copper bimetal contacts at junctions and tap-off points,4 tap-off outlets with automatic shutters that open and close automatically when tap-off units are installed or removed. They are equipped

with blanking plugs to maintain the degree of protection IP55. There are one or two tap-offs per metre, depending on the version,5 a mechanical and electrical jointing system. Electrical connection is via flexible grip contacts made of silver-plated copper. The system

ensures automatic and simultaneous connection of all live conductors and the continuity of the protective earth conductor,6 three copper bus conductors (Canalis KNT for the complementary offer).

DB

4036

73.e

ps

Feed unitsSupply a Canalis KN line, via a cable. They can be mounted at the end of a line (end feed) or in the middle (central feed). These units are made of moulded plastic for the 40, 63 and 100 A ratings and metal for the 160 A rating. They are equipped with:

b terminals for 16 mm2 copper cables on the 63 A feed units, copper contacts for 35 mm2 lugs on the 100 A feed units and for 95 mm2 lugs on the 160 A feed units

b multi-diameter knock-outs until 100 A rating and cable-gland plates for the 160 A rating

b a 3 x 2.5 mm2 terminal block for connection of the remote-transmission cable (Canalis KNT).

DD

2058

29.e

ps

1 End feed unitsThey are equipped with a mechanical and electrical locating system (polarisation), making it possible to supply a run from the right or the left. They are supplied with an end cover.2 Central feed unitsThey are supplied with two end covers.

Canalis KN, 40 to 160 A Low-power distribution

K06E12000 Version : 3.0 03/10/2011 145

Components for changing directionFor changes in direction and detours around obstacles (posts, pipes). They can be shaped by hand, on site, to follow any path.

DD

2101

86.e

ps

1 Flexible elbow

2 Flexible lengthOne metre long, these components can be used in corners to adjust to the lengths of the straight components running along three walls, regardless of the dimensions of the premises.

DD

2058

28.e

ps3 3D flexible lengthThree metres long, it can be bent in any direction to avoid major obstacles, particularly useful in false ceilings.

Fixing system and additional cable ductFixing system

DD

2058

25.e

ps

For attachment of the busbar trunking to the structure of the building, either directly or via threaded rods (8 mm diameter), brackets, etc.

The fixings are suitable for all types of mounting: on ceilings, suspended, on walls, etc. Regarding fixing installation, some tap-off outlets would not be available.

1 Universal fixing bracketFor edgewise or flat trunking installation. The recommended fixing distance is three metres for trunking installed edgewise and 1.5 metres when installed flat.

2 Wall bracketsFor edgewise mounting only. The recommended fixing distance is two metres.

3 Spring fixing bracketThese brackets are used to suspend the KN line on threaded rods M8 and do not require tools. The bracket is attached to the treaded rod by the spring mechanism, without nuts or bolts. Adjustment of the length of the threaded rod is simplified and the KN trunking can be installed three times faster.They are suitable for all ratings.

4 Pendant KitThe pendant kit includes:

- a perforated pendant (length: 1 meter, width: 80 mm) used to suspend a KN line from the bulding structure, an IPN or the ceiling.

- a cantilever arm that supports the cable tray under the KN line.

- the mounting hardware required to secure the KN bracket and the cantilever arm to the pendant.If neccessary, additional cantilever arms can be ordered.

DD

2058

30.e

ps

5 Fixing bracket for trackingDesigned for fast mounting, it supports the 100 mm cable trays made of perforated sheet-metal or wire mesh.Can be directly installed on Canalis trunking: no addition fixing points required.

K06E12000Version : 3.0 03/10/2011146

Description

IP55Ue = 230...500 VRAL 9001 white

Tap-off units (not equipped)For rapid connection of loads or secondary lines (e.g. lighting), in compliance with installation standardsCEI 60364 and regulations concerning TT, IT and TNS systems.

They can be handled under off-load conditions with the trunking energised. All contacts are made of silver-plated copper.

Tap-off units with disconnection by unpluggingDisconnection by unplugging the tap-off unit. Access to the electrical equipment and the terminals is possible only when the tap-off unit is unplugged (i.e. not energised). A safety device prevents connection to the trunking when the cover has been removed.

Tap-off units with isolatorsCategory AC 20 disconnection is obtained by opening the tap-off unit cover. Tap-off unit disconnection by opening or closing the cover should be carried out only if the downstreamload is de-energised. With the cover open, no live parts are accessible. The degree of protection is IPxxB. (protected against access with a finger).

A number of safety devices prevent the operator from: b plugging in the tap-off unit when the cover is closed b closing the cover before the tap-off unit is locked onto

the trunking b unplugging the tap-off unit when the cover is closed.

1 Moulded plastic casing insulating material which is self-extinguishing and halogen free.

2 Power socket

3 Cover equipped with contact blades

4 Trunking locking device (four points)

5 Protection device area:5a for fuses5b for C60 type modular devices

6 Cable exit knockouts

All tap-off units are manufactured in the KNA version (without a remote transmission bus). They can be converted to the KNT version by adding an “Remote control power socket block” KNT 63ZT1 (see Accessories page) that must bo erdered separately.

DD

2101

80.e

psD

D20

2075

.eps

DD

2101

76.e

psD

D21

0177

.eps


K06E12000 Version : 3.0 03/10/2011 147

Single-phase tap-off units with phase selection, equipped with a C60 circuit breakerThey are equipped with a phase selection system (L1, L2 or L3 + N + PE). Positioned as close as possible to the loads; extension leads are not required.

Tap-off unit with circuit breakerFor protection of the tap-off circuit by a circuit breaker. It is equipped with a Multi 9 single-pole C60 type circuit breaker.

DD

2102

36.e

psFour-pole tap-off units for modular devices (not equipped)

Tap-off unit for modular devicesThis tap-off unit accepts most devices available in multiples of 18 mm wide modules:

b rated current: 32 A b maximum capacity: 5 modules.

Tap-off unit covers can be lead sealed to prevent circuit-breaker switching by unauthorised persons.

DD

2101

71.e

ps

Tap-off units, with isolators, for modular devices (not equipped)They can be equipped with modular Multi 9 C60 type devices. Rated current: 63 A 2 sizes available: 8 or 12 18 mm modules. They are available with windows and blanking plates (devices visible and accessible) or with a plain cover (devices not accessible when energised).


DD

2101

79.e

ps

Tap-off units (with and without isolators) equipped with a SPD (Surge Protection Device) These tap-off units (with and without isolators) are pre-equipped with a modular Type 2 SPD (Surge Protection Device), with integrated disconnection device.

2 versions of 3P+N protection are available, based on Quick PF10 or Quick PRD40r.

These units are ready for use, can be plugged directly into the busbar trunking and do not require any additional wiring.

They should be positioned at least 30 m upstream of each load to be protected.

Tap-off unit covers can be lead sealed to prevent the SPD (Surge Protection Device) being tampered with by unauthorised persons.

DD

2058

31.e

ps

K06E12000Version : 3.0 03/10/2011148


Description

IP55Ue = 230...500 VRAL 9001 white

Tap-off units with power sockets (not equipped)For the supply of portable loads equipped with household or industrial plugs in a:

b garage, b maintenance workshop, b laboratory, b battery charging room, etc.

Rated courant: 32 ACapacity: 8 modules in multiple of 18 mm wideTwo versions are available:

b pre-equipped with 2 PK or PratiKa power sockets b customisable:

v two 90 x 100 mm openings for PK-type (screw connections) or PratiKa (fast and reliable connection without stripping) industrial or household sockets.

v direct mounting for industrial IEC 16 A 5P or IEC 32 A 3, 4 or 5P sockets.

v mounting on 65 x 85 mm clip-on adapter plate for industrial IEC 16 A 3P or 5P and household 10/16 A 2P + PE sockets.


DD

2102

53.e

ps

Tap-off units with fuse holders (not equipped)For protection of the tap-off by a fuse (not supplied).

1 Single-phase tap-off unitCan be equipped with fuse holders for:

b NF 8.5 x 31.5 fuse,16 A maximum, gG and aM type, b BS 88A1 fuse, 20 A maximum.

DD

2101

68.e

ps

2 Four-pole tap-off unitCan be equipped with fuse holders for:

b NF 10 x 38 fuse,20 A maximum, gG type b NF 10 x 38 fuse,25 A maximum, aM type b BS 88A1 fuse, 20 A maximum b DIN Neozed E14 fuse, 16 A maximum.

DD

2101

74.e

ps

DD

2101

72.e

ps

3 Tap-off unit with isolatorCan be equipped with fuse holders for:

b NF 14 x 51 fuse, gG and aM type 50 A maxi. b BS 88A1 fuse, 30 A b DIN fuse, type Diazed E27 25 A or Diazed E33

50 A or Neozed E18, 50 A.

DD

2101

78.e

ps

K06E12000 Version : 3.0 03/10/2011 149

AccessoriesAdd-on bus connection blockUsed to tap off the KNT bus.Clips into all tap-offs with isolators and can be used to control the equipment via a bus (BatiBus...). D

D20

5839

.eps

Outlet/tap-off unit interlocking deviceUsed to differentiate and mechanically lock out tap-off units when up to four different Canalis KN lines are present (voltage, frequency, etc.).

DD

2101

81.e

ps

K06E21010Version : 2.0 03/10/2011150

Canalis KN, 40 to 160 ABusbar trunking for low-power distribution

Catalogue numbers DimensionsIP55Ue = 230...500 VRAL 9001 white

Straight lengths with tap-off outlets

DD

2058

40.e

ps

Standard lengthsKNA pppED4ppp Polarity Rating

(A)Length (mm)

Number of tap-off outlets

Cat. no. Weight (kg)

3L + N + PE or 3L + PEN 40 3000 3 KNA 40ED4303 5.606 KNA 40ED4306 5.60

63 3000 3 KNA 63ED4303 5.706 KNA 63ED4306 5.70

100 3000 3 KNA 100ED4303 6.706 KNA 100ED4306 6.70

160 3000 3 KNA 160ED4303 7.306 KNA 160ED4306 7.30

KNA pppED4306

DD

2102

13.e

ps

KNA pppED4303

DD

2102

14.e

ps

Additional lengthsPolarity Rating

(A)Length (mm)



3L + N + PE or 3L + PEN 40 3000 1 KNA 40ED4301 5.5063 3000 1 KNA 63ED4301 5.60

2000 4 KNA 63ED4204 4.10100 3000 1 KNA 100ED4301 6.60

2000 4 KNA 100ED4204 4.80160 2000 4 KNA 160ED4204 5.20

KNA pppED4301

DD

2102

15.e

ps

KNA pppED4204

DD

2102

16.e

ps

K06E21010 Version : 2.0 03/10/2011 151

Feed units (supplied with end cover)

DD

2102

17.e

ps Designation Rating (A)

Mounting Connection Max. size (mm2)


Flexible RigidFeed unit 40 and 63 Left or right Terminals 16 25 KNA 63AB4 0.58

40 and 63 Central Terminals 16 25 KNA 63ABT4 1.47100 Left or right Lugs

(M8 screws)35 50 KNA 100AB4 1.12

KNA pppAB4 Central Lugs (M8 screws)

35 35 KNA 100ABT4 2.94

160 Left or right Lugs (M8 screws)

95 95 KNA 160AB4 2.80

Central Lugs (M8 screws)

95 95 KNA 160ABT4 5.50

KNA pppAB4

DD

2102

18.e

ps

DD

2050

38.e

ps Dim. 40 to 100 A 160 A63 A

A 265 340 256B 165 238 258C 100 102 98D 71 112 130E 92 127 185

KNA pppABT4

DD

2050

39.e

ps Dim. 40 to 100 A 160 A63 A

KNA pppABT4 A 535 685 600B 335 481 502C 100 102 98D 71 112 122

Cable entry E 92 127 243

Fixing system and routing system

DD

2102

21.e

ps Designation Rating(A)

Max. load (kg)

Mounting Order in multiple of


Fixing bracket 40 to 160 80 Suspended on M8 threaded rod (1) 10 KNB 160ZF1 0,12639 Wall mounting (2) 10 KNB 160ZF2 0,032

Spring fixing bracket 40 to 160 100 Suspended on M8 threaded rod (1) 10 KNB 160ZFPU 0,26Fixing bracket for tracking

40 to 160 11 Clipped on trunking (3) 4 KNB 160ZFG100

0,82

KNB 160ZF1 (1) Maximum recommended distance between fixings : 3 meters.(2) Maximum recommended distance between fixings : 2 meters.(3) Maximum recommended distance between fixings : 1,5 meters.

DD

2102

22.e

ps

KNB 160ZF1 KNB 160ZFG100 KNB 160ZFPU

DD

2102

25.e

ps

DD

2102

27.e

ps

DD

2102

28.e

ps

KNB 160ZF2

DD

2102

24.e

ps

DD

2102

23.e

ps

KNB 160ZF2

DD

2102

26.e

ps

KNB 160ZFG100

KNB 160ZFPU

K06E21020Version : 2.0 03/10/2011152


Straight lengths with built-in transmission bus

DD

2058

41.e

ps

KNT pppED4ppp Polarity Rating (A)

Length (mm)



3L + N + PE or 3L + PEN 40 3000 3 KNT 40ED4303 5.606 KNT 40ED4306 5.60

63 3000 3 KNT 63ED4303 5.706 KNT 63ED4306 5.70

2000 4 KNT 63ED4204 4.10100 3000 3 KNT 100ED4303 6.70

6 KNT 100ED4306 6.702000 4 KNT 100ED4204 4.80

KNT pppED4306

DD

2102

13.e

ps

KNT pppED4303

DD

2102

14.e

ps

KNT pppED4204

DD

2102

16.e

ps

Feed units with built-in transmission bus (supplied with end cover)

DD

2102

17.e


Mounting Connection Max. size (mm2)


Flexible RigidFeed unit 40 to 63 Left or right Terminals 16 25 KNT 63AB4 0.58

40 to 63 Central Terminals 16 25 KNT 63ABT4 1.47100 Left or right Lugs

(M8 screws)35 50 KNT 100AB4 1.12

KNT pppAB4 Central Lugs (M8 screws)

35 35 KNT 100ABT4 2.94

KNA pppAB4

DD

2102

18.e

ps

DD

2102

19.e

ps Dim. 40 à 63 A 100 AA 265 340B 165 238C 100 102D 71 112E 92 127

KNA pppABT4

DD

2102

20.e

ps Dim. 40 à 63 A 100 AKNT pppABT4 A 535 685

B 335 481Cable entryTransmission bus cable entry

C 100 102D 71 112E 92 127

Canalis KN, 40 to 160 A Busbar trunking for low-power distributionComplementary products

K06E21020 Version : 2.0 03/10/2011 153

Component for changing direction (2 dimensions)Standard

DD

2102

29.e


Direction (edgewise) Cat. no. Weight (kg)

Flexible elbow, for internal or external angle, 80° to 180°

40 to 63 Left or right KNA 63DL4 1.20100 Left or right KNA 100DL4 1.30160 Left or right KNA 160DL4 1.50

KNA pppDL4 Flexible length, 1 m for detours around obstacles

40 to 63 Left or right KNA 63DF410 2.10100 Left or right KNA 100DF410 2.30160 Left or right KNA 160DF410 2.50

DD

2102

30.e

ps KNA pppDL4

DD

2102

31.e

ps

KNA pppDF410KNA pppDF410

DD

2102

32.e

ps

With built-in transmission bus

DD

2102

29.e


Direction (edgewise) Cat. no. Weight (kg)

Flexible elbow, for internal or external angle, 80° to 180°

40 to 63 Left or right KNT 63DL4 1.20100 Left or right KNT 100DL4 1.30

KNT pppDL4 Flexible length, 1 m for detours around obstacles

40 to 63 Left or right KNT 63DF410 2.10100 Left or right KNT 100DF410 2.30

DD

2102

30.e

ps KNA pppDL4

DD

2102

31.e

ps

KNA pppDF410KNT pppDF410

DD

2102

32.e

ps

K06E21020Version : 2.0 03/10/2011154


Components for changing direction (three dimensions)

DD

2058

42.e

ps

KNA 100EDF430Designation Rating

(A)Direction (edgewise) Cat. no. Weight

(kg)Flexible length, 3 m 100 Left or right KNA 100EDF430 5.00

Up or down

KNA 100EDF430

DD

2102

33.e

ps

Minimum curve radius

DD

2021

47.e

ps

Fixing systemTrunking fixing system

DD

2022

16.e


Max. load (kg)

Mounting Order in multiple of


Pendant kit (1) 40 to 160 16 Under ceiling or I-beam

4 KNB 160ZFKP1 1.60

Cantilever arm, 100 mm 40 to 160 250 Wall or pendant

4 KFB CA81100 0.35

(1) Maximun recommended distance between fixings: 3 meters.KNB 160ZFKP1 KFB CA81100

DD

2022

18.e

ps

DD

2022

19.e

ps

KNB 160ZFKP1

DD

2022

17.e

ps

KFB CA81100

Canalis KN, 40 to 160 ABusbar trunking for low-power distributionComplementary products

K06E21020 Version : 2.0 03/10/2011 155

Accessories

Spare parts

DD

2102

34.e


Order in multiple of


Electrical and mechanical jointing unit

40 to 63 1 KNA 63ZJ4 0.60100 to 160 1 KNA 160ZJ4 0.60

IP55 blanking plate All 10 KNB 160ZB1 0.02

KNA pppZJ4, KNT pppZJ4

Spare parts with built-in transmission bus

DD

2020

69.e



Electrical and mechanical jointing unit

40 to 63 KNT 63ZJ4 0.60100 KNT 100ZJ4 0.60

KNA pppZJ4, KNT pppZJ4KNB 160ZB1

DD

2020

67.e

ps

K06E25000Version : 2.0 03/10/2011156


Single-phase IP41 tap-off unit with phase selection, equipped with a C60 circuit breakerDisconnection by unplugging the tap-off unit

DD

2102

36.e

ps Earthing system arrangement

Busbar trunking TT - TNS - TNCTap-off unit TT - TNS - TNS

Tap-off polarity L + N + PETap-off diagram (e.g. circuit-breaker protection)

DD

2104

46.e

ps

Rating (A)

Circuit breaker (supplied)

Connection Max. size (mm2)

Cable gland (not supplied)

Cat. no. Weight (kg)KNB 16CM2p

Flexible Rigid16 C60N, 1P,

curve CC60 4 6 Cable clamp

suppliedKNB 16CM2* 0.34

C60H, 1P, curve C

C60 4 6 Cable clampsupplied

KNB 16CM2H* 0.34

* Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.

KNB 16CM2H KNB 16CM2

DD

2102

38.e

ps

Cable exitCentre line of tap-off outlets

(1) Protruding.

Four-pole tap-off unit (not equipped) (1)

Disconnection by unplugging the tap-off unit

DD

2102

37.e

ps

Earthing system arrangement

Busbar trunking TT - TNS - TNC - IT (2)

Tap-off unit TT - TNS - TNS - IT (2)

Tap-off polarity 3L + N + PE (3)

Tap-off diagram (e.g. circuit-breaker protection)

DD

2102

41.e

ps

DD

2102

42.e

ps

Rating (A)

Number of 18 mm modules


Cable gland (4)

(not supplied)Cat. no. Weight

(kg)KNB 32CM55 Flexible Rigid

32 5 (1) Pre wired 6 10 ISO 32 max. KNB 32CM55 0.60(1) Supplied with blanking plate (1x5 divisible).(2) The neutral must be protected or not distributed (3L + PE) for IT system.(3) Also suitable for tap-off unit 3L + PE (N not distributed).(4) Maximum diameter for a multipolar cable.

KNB 32CM55

DD

2020

07.e

ps


(5) Protruding.

Canalis KN, 40 to 160 A Busbar trunking for low-power distribution16 to 32 A tap-off units for modular devices

K06E25000 Version : 2.0 03/10/2011 157

Tap-off unit with isolator (not equipped) (1)

Disconnection by opening the tap-off unit cover

DD

2102

44.e

ps





Tap-off diagram (e.g. circuit-breaker protection)

DD

2102

46.e

ps

DD

2102

47.e

ps

KNB 63SM4pp Rating (A)

Number of 18 mm modules


Cable gland (4) (not supplied)

Cat. no. Weigh (kg)

Flexible Rigid63 8 (1) Tunnel

terminals25 25 ISO 50 max. KNB 63SM48 2.40

12 (1) Tunnel terminals

25 25 ISO 50 max. or1 x 32 + 2 x 25

KNB 63SM412 2.70

(1) Supplied with blanking plates (1x5 divisible (8 modules) or 2x5 divisible (12 modules)).(2) The neutral must be protected or not distributed (3L + PE) for IT system.(3) Also suitable for tap-off unit 3L + PE (N not distributed).(4) Maximum diameter for a multipolar cable.

KNB 63SM48

DD

2020

08.e

ps

DD

2102

48.e

ps

X = 432.5

KNB 63SM412

DD

2020

08.e

ps

DD

2102

49.e

ps

X = 491


(5) Protruding.

63 A tap-off units for modular devices

K06E25000Version : 2.0 03/10/2011158


Tap-off unit with power sockets(1)


DD

2102

50.e

ps

These tap-off units are equipped with flush-mounted power sockets.




Tap-off polarity 3L + N + PETap-off diagram (e.g. circuit-breaker protection)

Tap-off unit wiring depends on the sockets used D

D21

0241

.eps

DD

2102

42.e

ps

Rating (A)

Number of modules (18 mm)

Equipment Cat. no. Weigh (kg)KNB 32CPppp Qty (3) Type Current Voltage Polarity

(A) (V)32 8 (1) 2 Household

socket Schuko

10/16 230 2P + T KNB 32CP11D* 2.90

2 Household socket NF

10/16 230 2P + T KNB 32CP11F* 2.90

1 Household socket NF

10/16 230 2P + T KNB 32CP15F* 3.00

1 Industrial socket

16 415 3P+N+T

1 Household socket Schuko

10/16 230 2P + T KNB 32CP15D* 3.00

1 Industrial socket

16 415 3P+N+T

1 Industrial socket

16 230 2P + T KNB 32CP35* 3.10

1 Industrial socket

16 415 3P+N+T

(1) Supplied with blanking plate (1x5 divisible).(2) The neutral must be protected or not distributed (3L + PE) for IT system.(3) Quantity.* Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.

KNB 32CPppp

DD

2102

52.e

ps

Centre line of tap-off outlets

(4) Protruding

Canalis KN, 40 to 160 A Busbar trunking for low-power distribution32 A tap-off unit, with power sockets protected by modular devices

K06E25000 Version : 2.0 03/10/2011 159

Empty tap-off units(1)


DD

2102

53.e

ps

This tap-off unit is equipped with an adapter plate for flush-mounted power sockets.


Busbar trunking TT - TNS - TNC - IT(2

Tap-off unit TT - TNS - TNS - IT(2

Tap-off polarity 3L + N + PETap-off diagram (e.g. circuit-breaker protection)

Tap-off unit wiring depends on the sockets used D

D21

0241

.eps

DD

2102

42.e

ps

Rating (A)

Number of modules (18 mm)

Equipment Cat. no. Weigh (kg)KNB 32CP

32 8(1) Tap-off unit not equipped. Free choice of equipment and power sockets

KNB 32CP* 2.70

(1) Supplied with blanking plate (1x5 divisible).(2) The neutral must be protected or not distributed (3L + PE) for IT system.* Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.

KNB 32CP

DD

2020

09.e

ps

Centre line of tap-off outlets (3) Protruding

Power sockets

Designation Rated current (A)

Rated voltage (V AC)

Number of poles Dimensions (W x H in mm)

Cat. no. Weigh (kg)

Industrial sockets 16 200-250 2P + T 65 x 85 PKY16F723 -3P + N + T 90 x 100 PKY16F725 -

380-415 2P + T 65 x 85 PKY16F733 -3P + N + T 90 x 100 PKY16F735 -

32 200-250 2P + T 90 x 100 PKY32F723 -3P + N + T 90 x 100 PKY32F725 -

380-415 2P + T 90 x 100 PKY32F733 -3P + N + T 90 x 100 PKY32F735 -

Household NF sockets 10 to 16 250 2P + T 65 x 85 81140 -Household Schuko sockets 10 to 16 250 2P + T 65 x 85 81141 -Screw-on plate For blanking of unused openings 13137 0.10

For adapting 65 x 85 mm power-socket bases 13136 0.09

32 A tap-off unit, for power sockets protected by modular devices

K06E25000Version : 2.0 03/10/2011160


Single-phase tap-off unit with phase selection for cylindrical fuses Disconnection by unplugging the tap-off unit

DD

2102

54.e



Tap-off polarity L + N + PETap-off diagram (e.g. fuse protection)

DD

2102

55.e

ps

Rating (A)

For fuses (not supplied)



Cat. no. Weigh (kg)KNB 16CF2

Flexible Rigid16 NF 8,5 x 31,5

Type gG : 16 A maxi.Type aM : 16 A maxi.

Cable clamp terminals

4 6 Cable clampsupplied

KNB 16CF2* 0.16


KNB 16CF2

DD

2022

15.e

ps


(1) Protruding.

Four-pole tap-off unit for cylindrical fuses Disconnection by unplugging the tap-off unit

DD

2020

05.e


Busbar trunking TT - TNS - TNC IT Tap-off unit TT - TNS - TNS IT

Tap-off polarity 3L + N + PE (1) 3L + PETap-off diagram (e.g. fuse protection)

DD

2102

58.e

ps

DD

2102

57.e

ps

Rating (A)




Cat. no. Weigh (kg)

KNB 25CF5 Flexible Rigid25 NF 10 x 38

Type gG, 20 A max. Type aM, 25 A max.


6 10 Cable clampsupplied

KNB 25CF5* 0.38

(1) Also suitable for tap-off unit 3L + PE (N not distributed).* Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.

KNB 25CF5

DD

2020

06.e

ps


(2) Protruding

Canalis KN, 40 to 160 A Busbar trunking for low-power distribution16 to 25 A tap-off units for NF fuses

K06E25000 Version : 2.0 03/10/2011 161

Tap-off unit with isolator for cylindrical fuses Disconnection by opening the tap-off unit cover

DD

2102

59.e

ps




DD

2104

70.e

ps

DD

2102

60.e

ps

KNB 50SF4Rating (A)



Cable gland (2)

(not supplied)Cat. no. Weigh

(kg)Flexible Rigid

50 NF 14 x 51 Type gG, 50 A max. Type aM, 50 A max.


16 16 ISO 50 max. KNB 50SF4 1.50

(1) Also suitable for tap-off unit 3L + PE (N not distributed)(2) Maximum diameter for a multipolar cable.

KNB 50SF4

DD

2020

08.e

ps

DD

2102

62.e

ps

X = 420


(3) Protruding

50 A tap-off units for NF fuses

K06E25000Version : 2.0 03/10/2011162


Single-phase tap-off unit with phase selection for screw-mounted fusesDisconnection by unplugging the tap-off unit

DD

2102

54.e



Tap-off polarity L + N + PETap-off diagram (e.g. fuse protection)

DD

2102

55.e

ps

Rating (A)




Cat. no. Weigh (kg)KNB 16CG2

Flexible Rigid16 BS88 A1 Cable clamp

terminals4 6 Cable clamp

suppliedKNB 16CG2* 0.18


KNB 16CG2

DD

2102

56.e

ps


(1) Protruding

Four-pole tap-off unit for screw-mounted fusesDisconnection by unplugging the tap-off unit

DD

2101

73.e




DD

2102

58

DD

2102

57

Rating (A)



Cable gland (2)


(kg)KNB 20CG5 Flexible Rigid

20 BS88 A1 Cable clamp terminals

4 6 ISO 32 max. KNB 20CG5* 0.60

(1) Also suitable for tap-off unit 3L + PE (N not distributed)(2) Maximum diameter for a multipolar cable.* Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.

KNB 20CG5

DD

2102

43.e

ps


(3) Protruding

Canalis KN, 40 to 160 Busbar trunking for low-power distribution16 to 20 A tap-off units for BS fuses

K06E25000 Version : 2.0 03/10/2011 163

Tap-off unit with isolator for screw-mounted fusesDisconnection by opening the tap-off unit cover

DD

2102

59.e

ps




DD

2104

70.e

ps

DD

2102

60.e

ps

KNB 32SG4Rating (A)



Cable gland (2)


(kg)Flexible Rigid

32 BS88 A1 Cable clamp terminals

10 10 ISO 50 max. KNB 32SG4 1.50

(1) Also suitable for tap-off unit 3L + PE (N not distributed).(2) Maximum diameter for a multipolar cable.

KNB 32SG4

DD

2020

08.e

ps

DD

2102

62.e

ps

X = 432.5


(3) Protruding

32 A tap-off units for BS fuses

K06E25000Version : 2.0 03/10/2011164


Four-pole tap-off unit for screw-type fusesDisconnection by unplugging the tap-off unit

DD

2101

73.e




DD

2102

58.e

ps

DD

2102

57.e

ps

Rating (A)



Cable gland (2)


(kg)KNB 16CN5 Flexible Rigid

16 Néozed E14 Tunnel terminals 4 6 ISO 32 max. KNB 16CN5* 0.60(1) Also suitable for tap-off unit 3L + PE (N not distributed).(2) Maximum diameter for a multipolar cable.

KNB 16CN5

DD

2102

43.e

ps * Adaptatation for transmission bus (KNT) with remote control power socket block KNT 63ZT1 not possible.


(3) Protruding.

Tap-off units for for screw-type fusesDisconnection by unplugging the tap-off unit

DD

2102

59.e

ps Tap-off unit disconnection by opening the cover should be carried out only if the downstream load is de-energised.



Tap-off polarity 3L + N + PE (1) 3L + PETap-off diagram(e.g. fuse protection)

DD

2104

70.e

ps

DD

2102

60.e

ps

KNB ppSp4 Rating (A)



Cable gland (2)


(kg)Flexible Rigid

25 Diazed E27 Tunnel terminals 16 16 ISO 50 max. KNB 25SD4 1.5050 Néozed E18 Tunnel terminals 16 16 ISO 50 max. KNB 50SN4 1.50

Diazed E33 Tunnel terminals 16 16 ISO 50 max. KNB 50SD4 1.50(1) Also suitable for tap-off unit 3L + PE (N not distributed).(2) Maximum diameter for a multipolar cable.

KNB ppSp4

DD

2020

08.e

ps

DD

2102

62.e

ps

X = 432.5


(3) Protruding.

Canalis KN, 40 to 160 A Busbar trunking for low-power distribution16 A tap-off units and 25 to 50 A tap-off units for DIN fuses

K06E25000 Version : 2.0 03/10/2011 165

Tap-off units equipped with a surge arresterDisconnection by unplugging the tap-off unit

DD

5116

17.e


Busbar trunking TT - TNS - TNC

Tap-off polarity 3L + N + PE(1)

Diagram L1 L2 L3 N PE

DD

5116

21.e

ps

Protection type

Surge arrester cartridges (supplied)

Connection Permissible short-circuit

Max. discharge current

Cat. no. Weight(kg)

KNB QPF Isc (kA) Imax (kA)Type 2 Fixed Pre-wired 6 10 KNB QPF 1.3

Surge arrester installed: Quick PF10, 3P+N, cat. no. 16618 (Type 2 monoblock surge arrester, with fixed cartridges and integrated disconnection device, certified IEC 81643-1, EN 61643-11).(1) Also suitable for tap-off unit 3L + PE (N not distributed).

DD

5116

19.e

ps

Centre line of tap-off outlets

(5) Side projection.

IP55Ue = 230...415 VRAL 9001 white Tap-off units equipped with a surge arrester

K06E25000Version : 2.0 03/10/2011166

Tap-off units with isolator equipped with a surge arresterDisconnection by opening the tap-off unit cover

DD

5116

18.e

ps


Busbar trunking TT - TNS - TNC


Diagram L1 L2 L3 N PE

DD

5116

21.e

ps

KNB QPRD Protection type

Surge arrester cartridges (supplied)

Connection Permissible short-circuit

Max. discharge current

Cat. no. Weight(kg)

Isc (kA) Imax (kA)Type 2 Removable Pre-wired 25 40 KNB QPRD 3.40

Surge arrester installed: Quick PRD40r, 3P+N, cat. no. 16294 (Type 2 monoblock surge arrester, with fixed cartridges and integrated disconnection device, certified IEC 81643-1, EN 61643-11).(1) Also suitable for tap-off unit 3L + PE (N not distributed).

DD

2020

08.e

ps

DD

5116

20.e

ps

X= 432.5

Centre line of tap-off outlets (5) Side projection.


Canalis KN - 40 to 160 A Busbar trunking for low-power distributionTap-off units equipped with a surge arrester

K06E25000 Version : 2.0 03/10/2011 167

AccessoriesFor all tap-off units

DD

2102

63.e

ps Designation Colour Order in multiple of


Outlet/tap-off unit interlocking device

White 10 KNB 160ZL10 0.01Red 10 KNB 160ZL20 0.01Yellow 10 KNB 160ZL30 0.01Blue 10 KNB 160ZL40 0.01

KNB 160ZLpp For tap-off units with modular devicesDesignation Description Cat. no. Weight

(kg)Modular blanking plate Divisible set of 10 x 5 13940 0.08Screw-on plate For blanking of unused openings 13137 0.10

For adapting 65 x 85 mm power-socket bases 13136 0.09Adhesive label (1) Set of 12 label-holders (height 24 mm) 08905 0.50

Set of 12 labels (height 24 mm) 08903 0.50Set of 12 divisible labels (height 24 mm) 08907 0.50(1) Self-adhevise support complete with transparent cover and paper label.

For tap-off units*

DD

2021

52.e

ps Designation Order in multiple of


Remote control power socket block

1 KNT 63ZT1 0.035

* KNT 63ZT1 is compatible with the following tap-off units:- Four-pole tap-off unit- Tap-off unit with isolator- Tap-off unit with isolator for cylindrical fuses- Tap-off unit with isolator for screw-mounted fuses- Tap-off units forscrew-type fuses

KNT 63ZT1

Accessories

K06E32000Version : 2.0 03/10/2011172

Canalis KN, 40 to 160 A 0 Busbar trunking for low-power distributionAssemby of trunking components

Installation

IP55Ue = 230...500 VRAL 9001 white

Assembling the straight lengths

DD

2056

80.e

ps

Connecting the feed-unit

DD

2056

81.e

ps

Assembling the end cover

DD

2056

82.e

ps

K06E32000 Version : 2.0 03/10/2011 173

Fixing Canalis KN in the brackets

KNB 160ZF1

KNB 160ZF2

KNB 160ZFPU

KNB 160ZFKP1

DD

2056

77.e

ps

Mounting the tap-off unit

DD

2056

78.e

ps

Mounting the tap-off unit with power sockets

DD

2056

79.e

ps

Contents Canalis KN -...

Documents

Transcript of Contents Canalis KN -...