Contact - Zoeftig Ltd · to BS EN12720 :2009 and non-ozone depleting (in accordance with the...
Transcript of Contact - Zoeftig Ltd · to BS EN12720 :2009 and non-ozone depleting (in accordance with the...
Contact
Technical specificationsPolyurethane seats
• Frame is made from bright mild steel flat bar formed and welded to shape. Steel frame encapsulated in Z-Form integral skin Polyurethane foam, 80 Shore A, UV resistant, easy clean, colour core matched to surface paint colour, resistance to liquid spills and staining to BS EN12720 :2009 and non-ozone depleting (in accordance with the Montreal Protocol)
• PU conforms to BS 5852 2006 Ignition sources 0, 1 & 5. Also meets the requirements of CAL 133.
Upholstered seats
• Pressed 13.5mm birch plywood, over moulded with cold cure foam and upholstered in vinyl, fabric or E-leather.
Seat and table brackets
• ABS
Arms, legs, end caps and clamps
• Pressure diecast ADC-12 Aluminium, Powder coated.
Beam
• Aluminium extrusion: 6005A T6, Clear natural Anodized. Wall Thickness: 4 – 5 mm.
Paint
• Epoxy Polyester Powder
• Powder Coating Thickness: 60-80 microns
• Cross-cut test: BS EN ISO 2409:2013 – ISO Class 0
Strength rating
• Tested & certified to meet the requirements of:
- BS EN12727:2016 test Level 4 - BS EN 16139:2013 test level 2 - ANSI/BIFMA X5.4-2012.
• Zoeftig seating design guide testing standard
Fire rating
• Tested & certified to meet the requirements of:
- BS 5852:2006 Assessment of the ignitability of upholstered seating by smoldering and flaming ignition sources. Section 4: Methods of test for the ignitability of upholstered composites ignition source 0, 1 & 5.
• Also meets the requirements of CAL 133
Quality
• Zoeftig Quality Standard 728
• Intended for indoor use only
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.
Contact
Contact Contact Plus
2150mm 585mm
850m
m (P
lus)
800m
m
2350mm (Plus) 620mm (Plus)
2260mm
850m
m (P
lus)
800m
m
585mm2460mm (Plus) 620mm (Plus)
General dimensions
Contact
Contact Plus
Contact and Contact Plus seat dimension comparisons
1240 (4’-0.8”) 100
(3.95”)]
525 (1’-8.7”)
550 (1’-9.65”)
1985 (6’-6.15”)
550 (1’-9.65”)
330 (6’-1”)
30 (1.2”)30
(1.2”)
390 (1’-3.35”)
620 (2’-0.4”) 425
(1’-4.75”)
610 (2’)
850 (2’-9.45”) 435
(1’-5.15”)
1340 (4’-4.75”) 100
(3.95”)575
(1’-10.65”)600
(1’-11.6”)
2160 (7’-1.05”)
600 (1’-11.6”)
355 (1’-1.2”)
30 (1.2”)30
(1.2”)
390 (1’-3.35”)
800 (2’-7.5”)
400 (1’-3.75”)
435 (1’-5.15”)
610 (2’)
585 (1’-11.05”)
Standard Plus
Seat types PU Upholstered PU Upholstered
Seat spacing Variable seat centres: Variable seat centres:
500mm to 550mm with arms, 460mm to 550mm without arms 550mm to 600mm with arms, 510mm to 600mm without arms
Seat width 440mm 440mm 490mm 490mm
Depth 585mm 585mm 620mm 620mm
Back Height 800mm 800mm 850mm 850mm
Seat height 435mm / DDA - 495 435mm / DDA - 495 435mm / DDA - 495 435mm / DDA - 495
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.
ContactGeneral description• Zoeftig’s new Contact waiting area seating system, designed with a
visual lightness, approachable precision and candid distinction.
• With Contact, unlike more conventional seating solutions, the seat and accessory positioning system is not static or predefined.
• Contact employs a clamp like, fixing mechanism which fits to an uninterrupted beam. This allows the parts to be fitted in any position along a straight line. So, whatever spacing you want between your seats, whatever position you want the arms and tables, Contact will let you do it. Thanks to its versatility, Contact will easily cater to a luxurious, open waiting areas with a comfortably spaced seating configuration, or a small, enclosed area with a need for a lot of seats with a tight, dimensionally informed configuration and everything in between.
• The innovative Contact Seating System is both adaptable and robust, designed and manufactured especially for projects where the furniture will be in constant use. The seating has been developed to satisfy the
Standard Contact seat spacer brackets
• For maintaining the correct distance between seat rows when placed back to back. These integrate seamlessly into the design of the product, making them as inconspicuous as possible. The spacer bracket generates a gap between back to back rows of 100mm at the top of a standard back rest.
most demanding anthropometric and ergonomic requirements while its simplicity and low maintenance requirements ensure the products long term performance.
• Contact offers a system of highly configurable, modular elements that will offer ultimate product flexibility and customer choice. The system includes: seats, arms, legs, tables and linking elements. The system facilitates further permutations of back to back seating and rows arranged in modules of seats and tables. Contact’s design and modularity also allows the product to be reconfigured at any stage during its lifetime and further improves the overall speed and ease of day-to-day servicing.
• Where more room is available, Contact Plus provides a wider seat than the standard Contact size, offering the highest levels of comfort for passengers. Also available in both PU and upholstered options, Contact Plus is an attractive and affordable option for airports with larger terminal spaces.
Supporting structure: beam, arms and legs
• The main structure of the system comprises of an extruded aluminum beam on to which individual parts (seats, tables, arms and legs) are mounted using Contact’s patented mechanism.
• Arms and legs are powder coated pressure diecast aluminium mouldings. The standard colour for these components is RAL 7021 and RAL 9006, but most RAL or Pantone colours can be specified. There may be an additional charge for custom colours depending on the size of order.
• Arms are optional and can be specified in any configuration, additionally seats and arms can be spaced at any distance within the system range. Due to the products modularity, a range of configurations are possible and can be changed throughout the products lifetime.
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.
Functional descriptionSeats
• Contact PU seat shells are manufactured using Zoeftig’s specially formulated Z-Form self-skinning, structural polyurethane foam system. The foam is moulded onto a steel frame, which allows the polyurethane foam to flex and conform to the user’s shape, enabling maximum comfort for extended periods.
• Our standard colour for polyurethane components is Graphite RAL 9011, but Z-Form can be matched to most RAL or Pantone colours. There may be an additional charge for custom colours, depending on the size of order.
• Contact Upholstered seat shells are available in a range of vinyl, fabric or E-leather. The upholstery, cut and sewn with a distinctive center stitch, is fitted over a fire-retardant core foam and structural birch plywood shell. A range of colours are available for each individual material.
• All seat options are mechanically fixed to the system facilitating easy removal and replacement. Stock polyurethane replacements can be ordered as and when required, but with any special PU colours, customers are advised to order an extra 5% of replacements when initially purchasing the system.
Contact• Legs are fitted at either end of the beam. Glide feet attached to the
legs can be free standing or fix down and are fully adjustable to allow for the system to sit level on uneven floors. Anti-slip pads can be added to feet where required.
Tables
• Full and half tables are constructed from high pressure compact laminate and faced on both the top & bottom using a decorative laminate (other table materials such as Quartz and Corian are available). Tables can be positioned at left- hand or right-hand row ends or intermediate positions.
PU
Upholstered
Component breakdown Seat types
End Cap Leg Beam
Arm
Back to back
PowerPowerful solutions
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.
Danish
US
Italian TUF A+C USB
BrazilianSwiss
UK
Australian
Schuko
Chinese/Combi
French/Belgium
USB C
USB A
Contact
Structure• Beams are always in
anodised aluminium.
• Bow tie (in arm), Arm plugs, Brackets, Adapter brackets – RAL 7021 ONLY (Feet always Black as standard)
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.
Russet
Oak Brown
Purple Iris
Grey
Bright Blue
Blueberry
Nasturtium
Burnt Orange
Saddle Tan
Lilac
Light grey
Phoenician
Colonial Blue
Marigold
Brandy
Camel
Mauve
Glacier
Sky
Coal
Saffron Silk
Apricot
Rum Sherbert
Rosewood
White
Light Blue
Cadet
Lemon Peel
Melon
Ceylon Ivory
Natural
Snow White
Cerulean
Fjord
Wheat
Candy Apple FireRed Lox Indian Red Melba
Deep Clay
Allspice
Grape
Slate
Marina
Royal Blue
Persimmon
Wine
Port
Chocolate
Expresso
Black
Bluejay
Navy
Tomato
New Burgundy
Materials and finishesUpholstery: Leather + E-Leather
Compact laminate
PVC / PU Colour options
* More options available
| Materials and finishes› Upholstery· Leather + E-Leather:
Contact |
* More E-Leather ref. are available
· PVC:/ PU Colour options
2980 Antracite 2976Black 2989 Burgundy 2982 Cloud Grey 3135 Tan 2978 Green 3136 Royal Blue 2984 Sand 3129 Garnet
› Arms, Legs & Endcaps
RAL7021 RAL9006Storm Solidz Graphite 3505 F7837
Folkstone F7927
Oiled Walnut F5487
› CompactLaminate › Structure· Beams are always in anodised aluminium.· Bow tie (in arm), Arm plugs, Brackets, Adapterbrackets –RAL 7021 ONLY (Feet always Black asstandard)
| Materials and finishes› Upholstery· Leather + E-Leather:
Contact |
* More E-Leather ref. are available
· PVC:/ PU Colour options
2980 Antracite 2976Black 2989 Burgundy 2982 Cloud Grey 3135 Tan 2978 Green 3136 Royal Blue 2984 Sand 3129 Garnet
› Arms, Legs & Endcaps
RAL7021 RAL9006Storm Solidz Graphite 3505 F7837
Folkstone F7927
Oiled Walnut F5487
› CompactLaminate › Structure· Beams are always in anodised aluminium.· Bow tie (in arm), Arm plugs, Brackets, Adapterbrackets –RAL 7021 ONLY (Feet always Black asstandard)
Antracite Black Burgundy Cloud Grey Tan Green Royal Blue Sand Garnet
Storm Solidz Graphite Folkstone RAL7021Oiled Walnut RAL9006
Arms, legs and endcaps
ContactEnvironmental and quality certificationsThis product has been manufactured according to the environmental management system certified as per standard UNE-EN ISO 14001:2015
The quality management of this product has been carried out according to the quality system certified as per standard UNE-EN ISO 9001:2015
Ho
we
ve
r,fo
rth
ep
urp
os
eo
ffa
cil
ita
tin
gto
the
cu
sto
me
rth
ela
tes
tn
ov
elt
ies
,FI
GU
ER
AS
res
erv
es
th
eri
gh
tto
intr
od
uc
eth
em
od
ific
ati
on
sa
nd
va
ria
tio
ns
tha
tit
con
sid
ers
mo
st
ap
pro
pri
ate
an
ds
uit
ab
lefo
rm
ark
eti
ng
its
pro
du
cts
.
| Environmental and quality certifications› This product has been manufactured according t o the environmental management system certified as per standard UNE-EN ISO 14001:2015
› The quality management of this product has been carried out according t o the quality system certified asper standard UNE-EN ISO 9001:2015
Contact |
6 / 4Ho
we
ve
r,fo
rth
ep
urp
os
eo
ffa
cil
ita
tin
gto
the
cu
sto
me
rth
ela
tes
tn
ov
elt
ies
,FI
GU
ER
AS
res
erv
es
th
eri
gh
tto
intr
od
uc
eth
em
od
ific
ati
on
sa
nd
va
ria
tio
ns
tha
tit
con
sid
ers
mo
st
ap
pro
pri
ate
an
ds
uit
ab
lefo
rm
ark
eti
ng
its
pro
du
cts
.
| Environmental and quality certifications› This product has been manufactured according t o the environmental management system certified as per standard UNE-EN ISO 14001:2015
› The quality management of this product has been carried out according t o the quality system certified asper standard UNE-EN ISO 9001:2015
Contact |
6 / 4
Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.