CONSTRUCTION PRODUCTS C-3-ZAXIS 130-5-1 ZAXIS 130-5 ... · (Subject To Change Without Notice)...

ENGINE:*Isuzu AI-4JJ1X - certified toIT4 / Stage IIIB emissions*97 Horsepower (72 kW) Net RatedPower (ISO9249)TurbochargerElectronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F(-37°C)Enclosed Fan GuardDual Element Dry-type Air Filterwith Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel ParticulateFilter with Curved Exhaust*Radiator, Oil Cooler,Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil ChangeIntervalEngine Oil Drain Coupler70% (35 degree) Off LevelCapabilityIsolation Mounted

HYDRAULICS:Open Center, Load Sensing withVariable Displacement PumpsHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionAdjustable Flow for AttachmentsThrough MonitorBoom and Arm Reduced DriftValvesPower BoostAuto Power LiftHydraulic Tank Site Gauge5,000 Hour Hydraulic Oil ChangeInterval

UNDERCARRIAGE:Two Speed Propel with Auto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesProvisions for Tie DownsX-Frame Car BodyHydraulic Track AdjusterEight Lower Rollers

*One Upper RollersSpring Applied HydraulicReleased Propel Brake

UPPER STRUCTURE:*Right, Left, and CounterweightMirrors(3)ToolboxVandal Locks for:

Cab DoorService DoorsFuel CapTool Box

*Counterweight, 5,512 lbs.(2,500 kg)Work Lights:

One Mounted on FrameOne Mounted on Boom

Remote Mounted Engine Oil andFuel Filters

FRONT ATTACHMENT:Oil Impregnated BushingsReinforced Resin Thrust PlatesTungsten Carbide Thermal Coatingon arm to Bucket JointCentralized Lubrication SystemDirt Seals on Bucket PinsLess BoomLess ArmLess Bucket

OPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, Headrest, andAdjustable Lumbar SupportMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant Temperature

GaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesNumerous Attachment ModesAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center (MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeFour Fluid-Filled Elastic MountsEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEF.O.B Kernersville, North Carolina for Complete Machine.See DEALER-INSTALLED ATTACHMENT section for additional source notes.

(Subject To Change Without Notice) CONSTRUCTION PRODUCTS C-3-ZAXIS 130-5-1

ZAXIS 130-5 EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE Continued...05U0FF ZAXIS 130-5 EXCAVATOR 158,139.00

MACHINE CONNECTIVITYMachine connectivity functions require cellular coverage. Usage of ZXLink System requirescustomer's acceptance of the terms of the John Deere Telematics System Contract.

Option availability limited by specific geographical regions. Please refer to region specific pricepages for appropriate ordering codes.

1700 ZXLink Ultimate Cellular for the Americas, excluding Costa RicaIncludes ZXLink hardware: integrated cab wiring harness, antenna, modular telematics gateway(MTG), and ZXLink Ultimate activation.

Includes 3 year subscription. Annual subscription renewal required after 3 years for continuedfunctionality. ZXLink customer account must be created to access ZXLink Ultimate data. Go towww.StellarSupport.com to renew or update ZXLink subscriptions.

In Base Price

1741 No ZXLink Ultimate No Charge

TRACK SHOES3200 600 mm (24 In.) Triple Semi Grousers without Backfill Blade

Recommended for rocky terrain, hard ground and stumps.In Base Price

3205 600 mm (24 In.) Triple Semi Grousers with 2590 mm (8'6") wide Backfill BladeRecommended for rocky terrain, hard ground and stumps.

13,664.00

3250 700 mm (28 In.) Triple Semi Grousers without Backfill BladeRecommended for general conditions and soft terrain.

645.00

3255 700 mm (28 In.) Triple Semi Grousers with 2690 mm (8'10") wide Backfill BladeRecommended for general conditions and soft terrain.

14,292.00

3260 600 mm (24 In.) Rubber Crawler Pads without Backfill BladeRubber pads are laminated to track shoe.This option requires a long lead time, contact your dealer for availability of this option.

10,190.00

3265 600 mm (24 In.) Rubber Crawler with 2590 mm (8'6") wide Backfill BladeRubber pads are laminated to track shoe.This option requires a long lead time, contact your dealer for availability of this option.

24,267.00

SEATS4125 Seat, Standard Mechanical In Base Price

4130 Seat, Heated Air-Suspension 785.00

BOOM6801 Less Boom

Excludes Arm Cylinder, Boom Cylinders and Plumbing on Boom.Includes Pin Connecting Boom to Mainframe and the Two Boom Cylinder Pins.Requires code 7001, "Less Arm".The "Hydraulic Filter Restriction Indicator" in DEALER-INSTALLED ATTACHMENTS isrecommended

In Base Price

6835 One Piece Boom with Arm Cylinder and Plumbing 13,190.00


ZAXIS 130-5 EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARMS7001 Less Arm, Bucket Cylinder, Bucket Linkage and All Attaching Pins and Hoses

Hydraulic Filter Indicator Recommended.In Base Price

7140 2.52 M (8 ft. 3 in.) Arm with BucketCylinder and Linkage

8,465.00

7180 3.01 M (9 ft. 11 in.) Arm with BucketCylinder and Linkage

9,719.00

AUXILIARY HYDRAULICS7401 Less Auxiliary Hydraulics In Base Price

7420 Auxiliary High-Flow Hydraulic Lines for 2.52 M Arm w/ 2-Way Foot Controller 6,016.00


7440 Auxiliary High-Flow Hydraulic Lines Only for 2.52 M ArmRequires a control circuit such as a foot controller or the standard right-hand control handle with (2)switches. Also order a solenoid kit.

3,996.00


4,118.00

BUCKETS8001 Less Buckets

Includes bucket mounting pins.In Base Price

8410 24 In. (600 mm), 0.48 Yd3 (0.37 M3) Heavy-Duty BucketIncludes Four (4) Esco Super-V EV23SYL Teeth

4,201.00


4,442.00

8430 36 In. (900 mm), 0.81 Yd3 (0.62 M3) Heavy-Duty BucketIncludes Five (5) Esco Super-V EV23SYL Teeth

4,967.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9150 Light Package

Additional 2 Cab lights, with 1 Right hand Boom Light.727.00

9500 Mechanical Control-Pattern Selector 1,333.00

9803 Special Export Preperation-- Do not install front for shippingFor Export Containerization

No Charge

9909 Non-Export Rust Preventive Coating 229.00Non-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support is



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL EQUIPMENT--ORDER AS DESIRED Continued...available by calling 1-866-213-3373.

Machine Information Center, PLUSMachine Information Center (MIC) kits can be ordered using the Technical Information WebBookstore at http://www.jdtechinfo.com. To locate these kits, use a search word of MIC.MIC_Plus is for certain customers that would like the ability to perform their own diagnostics as wellas downloading MIC data using an approved PDA. This software is not available directly tocustomers and Service Department should be advised before providing MIC_Plus to customers. Thereare 2 types of MIC_Plus kits available:1. Complete MIC_Plus (Customer Diagnostics) - Includes PDA, Software and Cables2. Update MIC_Plus (Customer Diagnostics) - Includes only Diagnostics cable and latest softwareTechnical support for the Customer MIC program is the responsibility of the selling dealer. Technicalsupport for using the Technical Information Web Bookstore can be obtained by calling1-866-213-3373.

Machine Information Center, StandardMachine Information Center (MIC) kits can be ordered using the Technical Information WebBookstore at http://www.jdtechinfo.com. To locate these kits, use a search word of MIC.MIC Download is used for downloading MIC controller only using an approved PDA. Customer thentransfers information to PC for viewing stored information. There are 2 types of kits available forcustomers:1. Complete MIC for Customer Download - Includes PDA, Software and Cables2. Update MIC for Customer Download - Includes only download cable and latest softwareTechnical support for the Customer MIC program is the responsibility of the selling dealer.Technical support for using the Technical Information Web Bookstore can be obtained by calling1-866-213-3373.

ATTACHMENTS FOR FIELD CONVERSIONF.O.B. Dubuque, Iowa for dealer-installed kits, except where noted. Some of the following kits mayrequire additional parts for a complete installation. Prior to ordering, check the installationinstructions by going to www.johndeeretechinfo.com and clicking on Library, or by clicking on thisHyperlink ( Installation Bulletin Search ), and insert the AT number to retrieve the attachmentinstallation instruction bulletin for additional parts.Exception to above note is FRONTIER Dealer Installed Kits.

Buckets, Heavy-Duty:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339032 24 In (610 mm), 0.48 yd3 (0.37 M3) Heavy-Duty BucketIncludes Four (4) Esco Super-V EV23SYL Teeth

3,370.00


3,584.00

AT339036 36 In (914 mm), 0.81 yd3 (0.62 M3) Heavy-Duty BucketIncludes Five (5) Esco Super-V EV23SYL Teeth

4,084.00


4,204.00

Guards:

AT390802 Cab FOPS GuardFOPS Level II, ISO 10262 Certified

2,533.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulic Couplers:

AT343227 Hydraulic Quick Coupler 7,520.00

AT345608 Installation Charge for Hydraulic CouplerInstallation Charge Order also requires attachment part number, SHIP-TO address for PaladinCustom Works, AND reference related machine order number.The related machine order must reference the attachment order number.Order code available only for Kernersville, North Carolina installations.

1,015.00

Hydraulic Thumb Kits:Please click on the following link to access the freight rate tables.

AT339844 Deere/Hitachi Hydraulic Thumb InstallationLabor for installation of Deere/Hitachi thumb at Paladin Customworks Kernersville, NC.

1,871.00

AT379640 Hydraulic Thumb Kit, DirectTeeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.

Please see DMAC solution 94331 for optimum thumb and bucket teeth engagement.

7,534.00

AT379641 Hydraulic Thumb Kit, Direct for CouplersTeeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.


7,534.00

AT379642 Hydraulic Thumb Kit, ProgressiveTeeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.


9,685.00

AT379643 Hydraulic Thumb Kit, Progressive for CouplersTeeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.


8,071.00

Hydraulics:

AT418447 Auxiliary High-Flow Lines for 2.52 M Arm 3,396.00


AT343969 Auxiliary Hydraulics, Attachment Combination KitRequires Auxiliary High-Flow Hydraulic Lines.Allows for a combination of attachments (i.e. hammer and thumb) to be connected to the high-flowlines, ready for operation.Kit includes parts to replace the arm tube of the high-flow hydraulic lines with a short tube and usesthe existing stop valves to shut-off thumb operation when not in use.

424.00

AT327652 Control Handle for Auxiliary Hydraulics, Left-HandRequires right-hand control handle for auxiliary hydraulics, AT390774, on the 450-850 sizeexcavators.Requires control solenoid for either 1-way or 2-way auxiliary hydraulics.Recommended for use with auxiliary hydraulic lines.

505.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT390742 Control Solenoid for 1-way Auxiliary Hydraulics with Foot Switch

Does not use the monitor for flow control.Does not require solenoids for auxiliary hydraulics.Includes foot switch, solenoid, relays, wiring, and hoses.

913.00

AT390718 Control Solenoids for 2-Way Auxiliary HydraulicsMonitor can be used to control hydraulic flow.Can be used with either right-hand or left-hand control handle.

768.00

AT418450 Foot Control, Two-Way Hydraulics 1,931.00

AT339802 Hydraulic Filter Restriction Indicator Kit 758.00

AT418446 Mechanical Control Pattern Selector KitProvides ability to switch control pattern between ISO/SAE Excavator and Deere Backhoe controlpattern.Some excavators require additional parts.

967.00

AT390776 Single Pedal Propel Kit 2,039.00

Operator Environment:

AT390824 Guard, Lower Front Window ISO Level II 1,028.00

AT390823 Guard, Upper Front Window ISO Level II 772.00

ETN93549 MP3 Player Field Kit 156.00

AT396663 Work LightsAdditional 2 Cab lights, with 1 Right hand Boom Light.

712.00

Overall Vehicle:

AT422264 Rear View Camera 1,646.00

AT390721 Vandal Cover Kit 2,164.00

REFERRAL ATTACHMENTSG.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales support and assistance willbe the responsibility of G.R. Manufacturing, Inc., and will be handled directly between the Dealerand G.R. Manufacturing, Inc.

G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173Phone: (800)841-8001Fax: (205)655-8005

AT430877 Counterweight, Bottom Mount, 1200 lbs.Parts are primed only (contact GR Mfg for paint color).

3,100.00

ETN85142 Front Window Guard, Polycarbonate 2,550.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...AT430873 Slant Top Rub Rails

Parts are primed only (contact GR Mfg for paint color).1,645.00



01 May 2013US



THIS PAGE IS INTENTIONALLY LEFT BLANK

01 May 2013US

ENGINE:*Isuzu AI-4JJ1X - certified toIT4 / Stage IIIB emissions121 Net Peak Power (ISO9249)TurbochargerElectronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F(-37°C)Enclosed Fan GuardDual Element Dry-type Air Filterwith Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel ParticulateFilter with Curved ExhaustSide by Side by Side Radiator,Oil Cooler, Intercooler withDust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil ChangeIntervalEngine Oil Drain Coupler70% (35 degree) Off LevelCapabilityIsolation Mounted



Two Upper RollersSpring Applied HydraulicReleased Propel Brake



Counterweight, 7,077 lbs. (3,210kg)Work Lights:




OPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, Headrest, andAdjustable Lumbar SupportMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant Temperature

GaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesNumerous Attachment ModesAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center (MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeFour Fluid-Filled Elastic MountsEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)



(Subject To Change Without Notice) CONSTRUCTION PRODUCTS H-2-ZAXIS 160 LC-5 -1

ZAXIS 160 LC-5 EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE Continued...05W0FF ZAXIS 160 LC-5 EXCAVATOR 192,144.00





In Base Price


TRACK SHOES3200 600 mm (24 In.) Triple Semi-Grouser Shoes


3250 700 mm (28 In.) Triple Semi-Grouser ShoesRecommended for general conditions and soft terrain.

1,119.00



BOOM6801 Less Boom


In Base Price




7115 2.6 M (8 ft. 6 in.) Arm with Bucket Cylinder and Linkage 10,831.00

7180 3.1 M (10 ft. 2 In.) Arm with Bucket Cylinder and Linkage 12,369.00




ZAXIS 160 LC-5 EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

AUXILIARY HYDRAULICS Continued...



4,747.00


4,899.00




4,079.00


5,497.00

8440 42 In. (1067 mm) 0.99 Yd3 (0.76 M3), Heavy-Duty BucketIncludes Five (5) Esco Super-V EV29SYL Teeth

5,750.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9010 Boom Cylinders with Plumbing to Main Frame

Requires 6801, Less Boom, and Code 7001, Less Arm.5,959.00

9150 Light PackageAdditional 2 Cab lights, with 1 Right hand Boom Light.

727.00


9600 Rear View Camera 1,745.00

9909 Non-Export Rust Preventive Coating 246.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL EQUIPMENT--ORDER AS DESIRED Continued...Machine Information Center, StandardMachine Information Center (MIC) kits can be ordered using the Technical Information WebBookstore at http://www.jdtechinfo.com. To locate these kits, use a search word of MIC.MIC Download is used for downloading MIC controller only using an approved PDA. Customer thentransfers information to PC for viewing stored information. There are 2 types of kits available forcustomers:1. Complete MIC for Customer Download - Includes PDA, Software and Cables2. Update MIC for Customer Download - Includes only download cable and latest softwareTechnical support for the Customer MIC program is the responsibility of the selling dealer.Technical support for using the Technical Information Web Bookstore can be obtained by calling1-866-213-3373.


ZXLINK Machine Monitoring System StandardZXLINK Machine Monitoring System Standard

The configurator does not automatically order and add ZXLINK to the Machine Quote.Need to MANUALLY add ZXLINK price to Machine Quote.Click on (ZXLINK Machine Monitoring System) Hyperlink above to access ZXLINK informationpage.Only for use in the United States and Canada at this time.


Buckets, Heavy-Duty, High-Capacity:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT428707 42 In (1067 mm), 1.05 yd3 (.80 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil)

5,881.00

AT428706 42 In (1067 mm), 1.05 yd3 (.80 M3) Standard Duty BucketOnly available for Unit 20 (Brazil)

5,592.00


6,258.00




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...


3,620.00


3,834.00


4,370.00


4,621.00

AT351718 48 In (1220 mm), 1.18 yd3 (0.90 M3) Heavy-Duty Bucket 5,228.00

Guards:


2,533.00

Hydraulic Couplers:



1,015.00



1,871.00



8,071.00



8,071.00



10,223.00



10,223.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulics:

AT415229 Auxiliary Hydraulic Lines for 2.6 M Arm 4,331.00



375.00


505.00

AT390742 Control Solenoid for 1-way Auxiliary Hydraulics with Foot SwitchDoes not use the monitor for flow control.Does not require solenoids for auxiliary hydraulics.Includes foot switch, solenoid, relays, wiring, and hoses.

913.00


768.00


AT334168 Hydraulic Filter Restriction Indicator KitInstallation Instructions T229238.

758.00

ETN93716 Mechanical Control Pattern Selector KitProvides ability to switch control pattern between ISO/SAE Excavator and Deere Backhoe controlpattern.Some excavators require additional parts.

967.00







712.00

Overall Vehicle:





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)




4,426.00


AT430874 Slant Top Rub RailsParts are primed only (contact GR Mfg for paint color).

1,730.00



01 May 2013US




01 May 2013US


UNDERCARRIAGE:Two Speed Propel with Auto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesProvisions for Tie DownsX-Frame Car BodyHydraulic Track AdjusterEight Lower RollersTwo Upper RollersSpring Applied HydraulicReleased Propel Brake

UPPER STRUCTURE:Right and Left MirrorsToolboxVandal Locks for:


Counterweight, 10,463 lbs.(4,750 kg)Work Lights:




OPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMultifunction, Color LCD MonitorSystem with:

Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAlternator Charge Indicator

Air Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour Meter

Mode Selection:One Work ModeThree Power ModesNumerous Attachment Modes

Auto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center (MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeFour Fluid-Filled Elastic MountsEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)



05X0FF ZAXIS 210 LC-5 EXCAVATOR 194,751.00

ENGINE1090 *Isuzu AI-4HK1, Certified to IT4 / Stage IIIB emissions

159 hp Net Peak Power (ISO9249)TurbochargerElectronic Engine Control UnitAuto-Idle System

14,018.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Antifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel Particulate Filter with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change IntervalEngine Oil Drain Coupler70% (35 degree) Off Level CapabilityIsolation Mounted#Note: For use only in areas where EPA Interim Tier 4/EU Stage IIIB is required.#

1060 Engine, Isuzu CC-6BG1 Meets Tier 2 / Stage II emissionsIsuzu CC-6BG1Meets Tier 2 / Stage II emissions159 Net Rated hp (ISO 9249)TurbochargerElectronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater SeparatorUnderhood Muffler with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change Interval*70% (35 degrees) Off Level CapabilityNote: For use in areas where EPA Tier 3/EU Stage IIIA or EPA Interim Tier 4/EU Stage IIIB is notrequired.

-1,529.00

DECALS / OPERATOR MANUALS1600 Customer Packet, SII, English

Not available for Brazil.No Charge

1610 Portugese Customer Delivery Packet No Charge





In Base Price




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TRACK SHOES3300 Long Undercarriage with 600 mm (24 In.) Triple Semi-Grouser Shoes

Recommended for rocky terrain, hard ground and stumps.-1,636.00

3310 Short Undercarriage with 600 mm (24 In.) Triple Semi-Grouser ShoesRecommended for rocky terrain, hard ground and stumps.

-9,265.00

3325 Long Undercarriage with 700 mm (28 In.) Triple Semi-Grouser ShoesRecommended for general conditions and soft terrain.

-919.00

3330 Short Undercarriage with 700 mm (28 In.) Triple Semi-Grouser ShoesRecommended for general conditions and soft terrain.

-8,524.00

3350 Long Undercarriage with 800 mm (32 In.) Triple Semi-Grouser ShoesRecommended for extremely soft terrain.

In Base Price

3360 Short Undercarriage with 800 mm (32 In.) Triple Semi-Grouser ShoesRecommended for extremely soft terrain.

-7,627.00



BOOM6801 Less Boom


In Base Price




7140 2.42 M (7'11") Arm with Bucket Cylinder and Linkage 12,388.00

7160 2.91 M (9'7") Arm with Bucket Cylinder and Linkage 12,767.00





5,808.00

7450 Auxiliary High-Flow Hydraulic Lines Only for 2.42 M ArmRequires a control circuit such as a foot controller or the standard right-hand control handle with (2)

5,555.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

AUXILIARY HYDRAULICS Continued...switches. Also order a solenoid kit.



8320 36 In. (914 mm) 0.90 Yd3 (0.69 M3) Heavy-Duty BucketIncludes Five (5) Esco Super-V EV29SYL Teeth

5,975.00


6,363.00

8340 48 In. (1219 mm) 1.29 Yd3 (0.99 M3) Heavy-Duty BucketIncludes Six (6) Esco Super-V EV29SYL Teeth

6,767.00

8410 24 in. (610 mm), 0.56 Yd3 (0.43 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) Esco Super-V EV29SYL Teeth

5,374.00

8420 36 In. (914 mm) 0.97 Yd3 (0.74 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) Esco Super-V EV29SYL Teeth

6,663.00

8430 42 In. (1067 mm), 1.19 Yd3 (0.91 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) Esco Super-V EV29SYL Teeth

6,933.00

8470 42 In (1067 mm), 1.58 yd3 (1.21 M3) Standard Duty BucketOnly available for Unit 20 (Brazil)

8,568.00

8480 48 In (1219 mm), 1.57 yd3 (1.20 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil) and Unit 28

8,568.00


8,811.00




727.00

9400 Tropical Doors, Radiator-Side and Pump-Side 379.00




No Charge


9700 Chrome Exhaust 407.00ZXLINK Machine Monitoring System Standard

ZXLINK Machine Monitoring System Standard



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL EQUIPMENT--ORDER AS DESIRED Continued...The configurator does not automatically order and add ZXLINK to the Machine Quote.Need to MANUALLY add ZXLINK price to Machine Quote.Click on (ZXLINK Machine Monitoring System) Hyperlink above to access ZXLINK informationpage.Only for use in the United States and Canada at this time.



AT339139 24 In (610 mm), 0.56 yd3 (0.43 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) Esco Super-V EV29SYL Teeth

4,701.00


5,004.00

AT339143 36 In (914 mm), 0.97 yd3 (0.74 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) Esco Super-V EV29SYL Teeth

5,951.00


6,202.00

AT428718 42 In (1067 mm), 1.58 yd3 (1.21 M3) Standard Duty BucketOnly available for Unit 20 (Brazil)

7,664.00

AT339147 48 In (1219 mm), 1.39 yd3 (1.06 M3) Heavy-Duty, High-Capacity Bucket 6,722.00

AT428719 48 In (1219 mm), 1.57 yd3 (1.20 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil) and 28 (LAT)

7,664.00

AT428720 54 In (1372 mm), 1.77 yd3 (1.35 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil)

7,894.00



4,437.00


4,523.00


4,851.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT339135 42 In (1067 mm), 1.09 yd3 (0.83 M3) Heavy-Duty Bucket

Includes Five (5) Esco Super-V EV29SYL Teeth5,698.00

AT339137 48 In (1219 mm), 1.29 yd3 (0.99 M3) Heavy-Duty BucketIncludes Six (6) Esco Super-V EV29SYL Teeth

6,089.00

Guards:


2,533.00

Hydraulic Couplers:




1,871.00



9,068.00



9,068.00



10,689.00



10,689.00

Hydraulics:

AT300477 Anti-Drift Valve with Plumbing and Hardware, Arm Cylinder 3,009.00

AT390761 Auxilary High-Flow Lines for 2.42 M ArmInstallation Instructions T227160

5,050.00

AT390760 Auxiliary High Flow Lines for 2.9 M ArmInstallation Instructions T227160.

5,194.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT343990 Auxiliary Hydraulics, Attachment Combination Kit

Requires Auxiliary High-Flow Hydraulic Lines.Allows for a combination of attachments (i.e. hammer and thumb) to be connected to the high-flowlines, ready for operation.Kit includes parts to replace the arm tube of the high-flow hydraulic lines with a short tube and usesthe existing stop valves to shut-off thumb operation when not in use.

375.00

AT340288 Boom Cylinder Anti-Drift Valve with Plumbing and HardwareInstallation Instructions T229721.

3,014.00


505.00


913.00


768.00



758.00


967.00







712.00

Overall Vehicle:

AT421387 Bottom Guards, Upperstructure, Heavy-Duty 2,657.00



REFERRAL ATTACHMENTS



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...G.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales support and assistance willbe the responsibility of G.R. Manufacturing, Inc., and will be handled directly between the Dealerand G.R. Manufacturing, Inc.



5,640.00



1,822.00



01 May 2013US

ENGINE:*Isuzu AI-4JJ1X - certified toIT4 / Stage IIIB emissions121 Net Peak Power (ISO9249)TurbochargerElectronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F(-37°C)Enclosed Fan GuardDual Element Dry-type Air Filterwith Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel ParticulateFilter with Curved ExhaustSide by Side by Side Radiator,Oil Cooler, Intercooler withDust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil ChangeIntervalEngine Oil Drain Coupler70% (35 degree) Off LevelCapabilityIsolation Mounted



Two Upper RollersSpring Applied HydraulicReleased Propel Brake



Counterweight, 8,620 lbs. (3,910kg)Work Lights:




OPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant Temperature

Gauge

Engine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesNumerous Attachment ModesAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center (MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeFour Fluid-Filled Elastic MountsEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE Continued...05Y0FF ZAXIS 180 LC-5 EXCAVATOR 197,031.00





In Base Price




3330 700 mm (28 In.) Triple Semi-Grouser ShoesRecommended for general conditions and soft terrain.

1,172.00

3360 800 mm (32 In.) Triple Semi-Grouser ShoesRecommended for extremely soft terrain.

1,664.00



BOOM6801 Less Boom


In Base Price




7115 2.7 M (8 ft. 10 in.) Arm with Bucket Cylinder and Linkage 11,424.00


AUXILIARY HYDRAULICS



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

AUXILIARY HYDRAULICS Continued...7401 Less Auxiliary Hydraulics In Base Price




5,185.00


5,353.00




6,556.00


7,015.00

8340 48 In. (1219 mm) 1.29 Yd3 (0.99 M3) Heavy-Duty BucketIncludes Six (6) Esco Super-V EV29SYL Teeth

7,425.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9150 Light Package

Additional 2 Cab lights, with 1 Right hand Boom Light.727.00






01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL EQUIPMENT--ORDER AS DESIRED Continued...Machine Information Center, StandardMachine Information Center (MIC) kits can be ordered using the Technical Information WebBookstore at http://www.jdtechinfo.com. To locate these kits, use a search word of MIC.MIC Download is used for downloading MIC controller only using an approved PDA. Customer thentransfers information to PC for viewing stored information. There are 2 types of kits available forcustomers:1. Complete MIC for Customer Download - Includes PDA, Software and Cables2. Update MIC for Customer Download - Includes only download cable and latest softwareTechnical support for the Customer MIC program is the responsibility of the selling dealer.Technical support for using the Technical Information Web Bookstore can be obtained by calling1-866-213-3373.


ZXLINK Machine Monitoring System StandardZXLINK Machine Monitoring System Standard

The configurator does not automatically order and add ZXLINK to the Machine Quote.Need to MANUALLY add ZXLINK price to Machine Quote.Click on (ZXLINK Machine Monitoring System) Hyperlink above to access ZXLINK informationpage.Only for use in the United States and Canada at this time.




4,701.00


5,004.00


5,951.00


5,881.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT428712 42 In (1067 mm), 1.05 yd3 (.80 M3) Standard Duty Bucket

Only available for Unit 20 (Brazil)5,592.00


6,202.00


6,258.00



4,437.00


4,523.00


4,851.00


5,698.00

Guards:


2,533.00

Hydraulic Couplers:




1,871.00



9,068.00



9,068.00



10,689.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT379651 Hydraulic Thumb Kit, Progressive for Couplers

Teeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.


10,689.00

Hydraulics:

AT415234 Auxiliary High Flow Lines for 3.2 M Arm 4,822.00



375.00


505.00


913.00


768.00



758.00

ETN93716 Mechanical Control Pattern Selector KitProvides ability to switch control pattern between ISO/SAE Excavator and Deere Backhoe controlpattern.Some excavators require additional parts.

967.00







712.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Overall Vehicle:






4,426.00



1,730.00



01 May 2013US




01 May 2013US

ENGINE:Yanmar 3TNV88 3-100

(1.64 l)26.4 SAE Net HPCertified to EPA Interim

Tier 4 EmissionsAntifreezeSingle Dry-Type Air FilterElectric Fuel ShutoffFan GuardFull Flow Oil FilterLow Maintenance BatteryFuel Filter & Water SeparatorIsolation MountedUnder Hood Muffler35 Amp Alternator - 12 VoltHYDRAULICS:Open Center with Two Variable

Displacement Pumps and OneFixed Gear Pump

Hydraulic Pilot Controls forBoom, Arm, Bucket, Swing,Boom Swing, Blade, andAuxiliary

Excavator to Backhoe ControlPattern Change Valve

Auxiliary Function Controland Right Hand Lever

Boom Swing Foot ControlAxial Piston Swing MotorWet Disk Swing BrakeAuxiliary Valve SectionAuxiliary Hydraulic Lines with

Release Under PressureHydraulic Quick Couplers toEnd of Boom

UNDERCARRIAGE:12 in. (300 mm) Rubber Track5 ft. 1 in. (1.55 m) Backfill

BladePropel Motor ShieldPlanetary Final DriveTwo Speed Propel with Auto-

matic ShiftingAxial Piston Propel Motor

UPPERSTRUCTURE:Zero Tail Swing Configuration360 Degree Upper Structure

RotationIndependent Boom Swing

(72 degree left and62 degree right rotation)

ROPS/FOPS CanopyToolboxVandal Locks for:

Service DoorsWork lights:

One Mounted on Canopy(Cab)One Mounted on Boom

Counterweight 644 lb.(292 kg.)

FRONT ATTACHMENTS:Boom 6 ft. 10 in. (2.10 m)Arm 3 ft. 10 in. (1.17 m)Mechanical Quick Coupler

OPERATOR'S STATION:Vinyl Seat with Fore/Aft

Adjustment2 in. Retractable Seat Belt

HornHour MeterInstrumentation LightsMonitor System with:

Engine Preheat IndicatorEngine Oil PressureIndicatorAlternator VoltageIndicatorFuel Gauge andLevel IndicatorEngine CoolantTemperature Gaugeand IndicatorHour MeterOperating Lights SwitchOperating LightsIndicator

Foldable Propel Pedals andLevers

Two Travel Modes withAutomatic Shifting and SpeedSelection Switch

Motion Alarm with CancelSwitch

Cupholder12 Volt Cell Phone Outlet

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


BASE MACHINE2870FF ZX27U-3 COMPACT EXCAVATOR 35,595.00

TRACK3125 12 in. (300 mm) Rubber Track In Base Price

3128 12 in. (300 mm) Steel Track with Triple Semi-Grouser Shoes 712.00

3130 Rubber Crawler PadsNOTE:* Shipped from the nearest port* Factory Hydraulic Clamp installation is not available; dealer-installed only* Steel track shoes with vulcanized rubber pads bonded to top of shoes.* Long lead-time item; contact Order Fulfillment for availability

2,793.00

ARM7110 Standard Arm 3 ft. 10 in. (1.17 m) In Base Price

(Subject To Change Without Notice) CONSTRUCTION PRODUCTS 1

ZX27U-3 COMPACT EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARM Continued...7120 Long Arm 4 ft. 10 in. (1.47 m) and Extra Counterweight 412 lbs (187 kg)

NOTE:* Long lead-time item; contact Order Fulfillment for availability* Extra counterweight extends beyond width of tracks when upper structure is rotated to the side

1,341.00

CANOPY OR CAB8150 ROPS / FOPS Canopy In Base Price

8185 ROPS / FOPS Cab with Heater & Air ConditionerCab is Radio Ready with Speakers, Antenna, Wiring and Mounting.

6,001.00

SEAT4140 Standard Seat - Vinyl

NOTE: Requires ROPS / FOPS Canopy (8150)In Base Price

4145 Suspension Seat - VinylNOTE: Requires ROPS / FOPS Canopy (8150)

337.00

4150 Suspension Seat - ClothNOTE: Requires ROPS / FOPS Cab with Heater & Air Conditioner (8185)

366.00


Buckets:

AT316552G 12 in. (305 mm) Heavy Duty GREY Bucket; 1.33 cu.ft. (0.038 cu. m) (3 Teeth Included)

598.00

AT340071G 18 in. (457 mm) Heavy Duty GREY Bucket BundleNOTE:* Bundle includes a quantity of 4 of the same size bucket* Price includes a 5% discount from individual buckets' prices

2,357.00


623.00

AT316554G 24 in. (610 mm) Heavy Duty GREY Bucket; 3.29 cu. ft. (0.093 cu. m) (4 Teeth Included) 671.00

AT316555G 30 in. (762 mm) Ditch Cleaning GREY Bucket; 4.4 cu. ft. (0.12 cu. m) (No Teeth) 748.00

Clamps:

AT349585 Hydraulic Clamp, Long Arm - Factory Installation FeeNOTE:* Must also order Hydraulic Clamp* Cannot be ordered with Rubber Crawler Pads, 3130

623.00


ZX27U-3 COMPACT EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT349584 Hydraulic Clamp, Short Arm - Factory Installation Fee

NOTE:* Must also order Hydraulic Clamp* Cannot be ordered with Rubber Crawler Pads, 3130

508.00

AT401411 Hydraulic GREY Clamp Bundle, Short- and Long-ArmsUnits prior to SN 255739 also order T213184 (1) and AT317646 (1).* Bundle includes a quantity of 4 of the same size Hydraulic Clamp* Price includes a 5% discount from individual clamps' prices* Works with quick coupler buckets* If equipped with Long Arm, also requires 2 hydraulic hoses (4661804) from Parts

6,391.00

AT401412 Hydraulic GREY Clamp, Short- and Long-ArmsUnits prior to SN 255739 also order T213184 (1) and AT317646 (1)* Works with quick coupler buckets* If equipped with Long Arm, also requires 2 hydraulic hoses (4661804) from Parts

1,684.00

Engine:

AT358708 Engine Coolant Heater (110 Volt)NOTE:* Recommended for use in temperatures 32 degrees F / 0 degrees C, and below.* For model 17, also order Adapter Kit (Part AM882530)

See Parts

Kits and Accessories:

AT171619 3 in. Retractable Seat Belt See Parts

TY21764 Heavy Duty BatteryNOTE:* Recommended for Cold Start climates

See Parts

4647737 RadioNOTE: AM, FM, Clock, and Set-able station buttons

See Parts

AT323252 Secondary ExitNOTE:* For serial #s 224915 and below* Only available for cabs with hinged rear window

450.00

REFERRAL ATTACHMENTS



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...G.R. Mfg.:G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales support and assistance willbe the responsibility of G.R. Manufacturing, Inc., and will be handled directly between the Dealerand G.R. Manufacturing, Inc.


AT318959 Front Protection Screen for Cab (27-60CE)NOTE:* Required when a Hydraulic Breaker is equipped on a ZX27U, ZX35U, or ZX50U CompactExcavator with a Cab

791.00

AT318960 Front Protection Screen for Canopy (27-50 CE)NOTE:* Required when a Hydraulic Breaker is equipped on a ZX27U, ZX35U, or ZX50U CompactExcavator with a Canopy

620.00



01 May 2013US

ENGINE:Yanmar 3TNV88

(1.64 l)23.3 SAE Net HPCertified to EPA Final

Tier 4 EmissionsAntifreezeSingle Dry-Type Air FilterElectric Fuel ShutoffFan GuardFull Flow Oil FilterLow Maintenance BatteryFuel Filter & Water SeparatorIsolation MountedUnder Hood Muffler55 Amp Alternator - 12 Volt

HYDRAULICS:Closed-Center, Load-Sensing

with One Variable Displace-ment Pump and One FixedGear Pump



Auxiliary Function Controland Right Hand Pilot Lever




BladePropel Motor ShieldPlanetary Final DriveTwo Speed Propel with Auto-





ROPS/FOPS CanopyVandal Locks for:




FRONT ATTACHMENTS:Boom 8 ft. (2.45 m)Arm 4 ft. 4 in. (1.32 m)Mechanical Quick Coupler

OPERATOR'S STATION:Electronic Throttle Control

with Auto IdleVinyl Seat with Fore/Aft

Adjustment

2 in. Retractable Seat BeltHornHour MeterInstrumentation LightsMonitor System with:



Two Travel Modes withAutomatic Shifting and SpeedSelection Switch



CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)




3128 12 in. (300 mm) Steel Track with Triple Semi-Grouser Shoes 1,035.00


3,029.00




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARM Continued...

7120 Long Arm 5 ft. 8 in. (1.72 m) and Extra Counterweight 507 lbs (230 kg)NOTE:* Long lead-time item; contact Order Fulfillment for availability* Extra counterweight extends beyond width of tracks when upper structure is rotated to the side

1,452.00



6,001.00




337.00


366.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9100 Bolt On Cutting Edge 734.21

9555 Angle Blade 2,881.00


Buckets:


598.00


2,631.00

AT316557G 18 in. (457 mm) Heavy Duty GREY Bucket; 2.8 cu.ft. (0.080 cu. m) (_ Teeth Included)

695.00


2,949.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT316558G 24 in. (610 mm) Heavy Duty GREY Bucket; 4.0 cu.

ft. (0.11 cu. m) (4 Teeth Included)779.00

AT316559G 30 in. (762 mm) Heavy Duty GREY Bucket; 5.2 cu. ft. (0.14 cu. m) (5 Teeth Included) 851.00

AT316560G 34 in. (863 mm) Ditch Cleaning GREY Bucket; 5.9cu. ft. (0.17 cu. m) (No Teeth)

916.00

Clamps:


623.00

AT349584 Hydraulic Clamp, Short Arm - Factory Installation FeeNOTE:* Must also order Hydraulic Clamp* Cannot be ordered with Rubber Crawler Pads, 3130

508.00

AT386304 Hydraulic GREY ClampWorks with quick coupler buckets except 12" Heavy Duty.If equipped with Long Arm (7120), also requires 2 hydraulic hoses (AT321206 & AT324558) fromParts.FOR SN PRIOR TO 265350 ALSO ORDER T213184 and AT317646.

1,684.00

AT340080G Hydraulic GREY Clamp BundleNOTE:* Bundle includes a quantity of 4 of the same size Hydraulic Clamp* Price includes a 5% discount from individual clamps' prices* Works with quick coupler buckets except 12" Heavy Duty* If equipped with Long Arm (7120), also requires 2 hydraulic hoses (AT321206) from Parts.

6,391.00

Engine:


See Parts



FYD00000525 Cab Tilt Tool See Parts


See Parts


See Parts



01 May 2013US




01 May 2013US


(2.19 l)35.9 SAE Net HPCertified to EPA Final










BladePropel Motor ShieldPlanetary Final DriveTwo Speed Propel With Auto-





ROPS/FOPS CanopyToolboxVandal Locks for:





OPERATOR'S STATION:Electronic Throttle Control

with Auto IdleVinyl Seat with Fore/Aft

Adjustment2 in. Retractable Seat BeltHornHour MeterInstrumentation LightsMonitor System with:



Two Travel Modes withAutomatic Shifting And SpeedSelection Switch



CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)






5,647.00




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARM Continued...


1,496.00



6,001.00




337.00


366.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9100 Bolt On Cutting Edge

Can only be ordered for the Angle Blade option1,030.26

9555 Angle Blade 3,079.00


Buckets:


833.00


3,476.00


916.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT340078G 24 in. (610 mm) Heavy Duty GREY Bucket Bundle

NOTE:* Bundle includes a quantity of 4 of the same size bucket* Price includes a 5% discount from individual buckets' prices

3,910.00


1,031.00

AT316564G 30 in. (762 mm) Heavy Duty GREY Bucket; 6.8 cu. ft.(0.19 cu. m) (5 Teeth Included)

1,103.00

AT316565G 36 in. (914 mm) Ditch Cleaning GREY Bucket; 8.3cu. ft. (0.24 cu. m) (No Teeth)

1,144.00

Clamps:


623.00


508.00

AT340081G Hydraulic GREY Clamp BundleNOTE:* Bundle includes a quantity of 4 of the same size Hydraulic Clamp* Price includes a 5% discount from individual clamps' prices* Works with Quick Coupler Buckets except 12" Heavy Duty* If equipped with Long Arm (7120), also requires 2 hydraulic hoses (AT321206) from Parts.

6,657.00

AT397391 Hydraulic GREY Clamp for (Model 50 SN 275467 above) and (Model 60 SN 280529 above)Works with Quick Coupler Buckets except 12" Heavy DutyIf equipped with Long Arm (7120), also requires 2 hydraulic hoses (AT321206 and AT363177) fromParts.

WHEN AT397391 IS ORDERED FOR SERVICE FOR THE 50D, ZX50U2 OR ZX50U3 UNITSPRIOR TO SERIAL NUMBER 275466 ALSO ORDER AT317647(1) AND T213185 (1).

WHEN AT397391 IS ORDERED FOR SERVICE FOR THE 60D OR ZX60USB3 UNITS PRIOR TOSERIAL NUMBER 280529 ALSO ORDER AT317647 (1) AND T213185 (1).

1,755.00

Engine:


See Parts





See Parts



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...4647737 Radio

NOTE: AM, FM, Clock, and Set-able station buttonsSee Parts



01 May 2013US


(3.3 l)53 SAE Net HPCertified to EPA Final










BladePropel Motor ShieldPlanetary Final DriveTwo Speed Propel With Auto-


UPPERSTRUCTURE:Reduced Tail Swing Configuration360 Degree Upper Structure



ROPS/FOPS/TOPS CabToolboxVandal Locks for:





OPERATOR'S STATION:Air Conditioning and HeatElectronic Throttle Control

with Auto IdleEfficiency/Productivity ModesCloth Suspension Seat with

Fore/Aft Adjustment2 in. Retractable Seat BeltHornHour MeterInstrumentation LightsMonitor System with:



Two Travel Modes withAutomatic Shifting And SpeedSelection Switch



CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


BASE MACHINE2920FF ZX60USB-5 COMPACT EXCAVATOR 76,736.06




5,647.00

ARM


ZX60USB-5 COMPACT EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARM Continued...7110 Standard Arm 4 ft. 11 in. (1.50 m) In Base Price


1,634.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED9555 Angle Blade 4,301.00


Buckets:

AT358512G 18 in. (457 mm) Heavy Duty 4 Tooth GREY Bucket; 5.1 cu. ft. 1,080.00


AT358514G 30 in. (762 mm) Heavy Duty 5 Tooth GREY Bucket; 10.0 cu. ft 1,352.00


Clamps:


623.00


508.00

AT397391 Hydraulic GREY Clamp for (Model 50 SN 275467 above) and (Model 60 SN 280529 above)Works with Quick Coupler Buckets except 12" Heavy DutyIf equipped with Long Arm (7120), also requires 2 hydraulic hoses (AT321206 and AT363177) fromParts.

WHEN AT397391 IS ORDERED FOR SERVICE FOR THE 50D, ZX50U2 OR ZX50U3 UNITSPRIOR TO SERIAL NUMBER 275466 ALSO ORDER AT317647(1) AND T213185 (1).

WHEN AT397391 IS ORDERED FOR SERVICE FOR THE 60D OR ZX60USB3 UNITS PRIOR TOSERIAL NUMBER 280529 ALSO ORDER AT317647 (1) AND T213185 (1).

1,755.00


ZX60USB-5 COMPACT EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Engine:


See Parts





See Parts


See Parts



01 May 2013US




01 May 2013US

ENGINE:Isuzu CC-4JG1 187hp 3.06L #certified to IT4 / Stage IIIBemissions54 SAE Net HPDirect InjectionAuxiliary Pump DriveAntifreeze Protection to -34degrees F (-37 degrees C)Single Dry-Type Air FilterElectric Fuel ShutoffLow-Noise Fan with GuardFull Flow Oil FilterHeavy-Duty Low MaintenanceBatteries (180 Minute Reserve)Fuel FilterIsolation MountedRadiator/Oil Cooler Trash ScreenUnderhood Muffler with VerticalExhaust50 Amp Alternator - 24 VoltAutomatic Belt Tension DeviceWater SeparatorHYDRAULICS:Open Center with Two VariableDisplacement PumpsHydraulic Shut-Off LeverHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionBoom Reduced-Drift ValvesUNDERCARRIAGE:600 mm (24 In.) Track ShoesFront Track GuidePropel Motor ShieldPlanetary Final DriveTwo-Speed PropelAxial Piston Propel MotorBackfill BladeUPPERSTRUCTURE:Rearview Mirrors (right, left,and rear)Door, Tropical, Left-HandToolboxVandal Locks for:

Cab DoorService Doors

Fuel CapHydraulic ReservoirToolbox

Work lights:One Mounted on FrameOne Mounted on Boom

Counterweight 3,040 lbs. (1,380kg)FRONT ATTACHMENTS:WC Thermal Spraying of BucketJointBucket Clearance adjustmechanismDirt Seal on all Bucket PinsMonolithically cast bucket linkA3.72 M (12 ft. 3 in) One PieceBoomLess ArmLess BucketOPERATOR'S STATION:Adjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMultifunction, Color LCD MonitorSystem with:

Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicator

Work Mode IndicatorAuto Idle IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour Meter

Mode Selection:One Work ModeTwo Power ModesNumerous Attachment Modes


CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. US/Canadian Port of Entry except where noted.See DEALER-INSTALLED ATTACHMENT section for additional source notes.

3270FF ZAXIS 75US-3 EXCAVATOR 109,328.00

TRACK SHOES3205 600 mm (24 In.) Triple Semi-Grouser Shoes w/ Blade In Base Price

3265 450 mm (18 In.) Rubber Pads w/ Blade 2,185.00

(Subject To Change Without Notice) CONSTRUCTION PRODUCTS ZAXIS 75US-3-1

ZAXIS 75US-3 EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TRACK SHOES Continued...

3275 450 mm (18 In.) Continous Rubber Belt w/ BladeLong lead time required.

4,920.00

ARMS7001 Less Arm, Bucket Cylinder, Bucket Linkage and All Attaching Pins and Hoses In Base Price

7015 1.62 M (5 Ft. 4 In.) Arm Assembly with Bucket Cylinder and Linkage 5,141.00


OPTIONAL EQUIPMENT--ORDER AS DESIREDNon-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support isavailable by calling 1-866-213-3373.




Buckets, Heavy-Duty:Buckets come standard with horizontal wear strips.


ZAXIS 75US-3 EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT384251 24 In (610 mm), 0.31 yd3 (0.24 M3) Heavy-Duty BucketIncludes Five (5) Fanggs Teeth (TF23D).

2,565.00

AT384253 30 In (762 mm), 0.41 yd3 (0.31 M3) Heavy-Duty BucketIncludes Six (6) Fanggs Teeth (TF23D).

2,709.00

AT384255 36 In (914 mm), 0.51 yd3 (0.39 M3) Heavy-Duty BucketIncludes Seven (7) Fanggs Teeth (TF23D).

2,962.00

Buckets, Ditching:

AT339016 48 In (1219 mm), 0.64 yd3 (0.49 M3) Ditching Bucket 2,335.00

Hydraulics:


AT356391 Foot Pedal Control Kit for Meterable Two-Way HydraulicsRecommended: Hydraulic Filter Restriction Indicator KitDoes not require a solenoid kit.

1,382.00

AT196587 Foot Pedal Switch for 1-Way Control of Auxiliary ValveInstallation instructions T161995.Average installation, 1 hour.For customers who want an auxiliary valve with foot pedal control of attachments that require1-direction on/off control without metering.Includes foot switch and wiring harness.

ALSO ORDER:Hydraulic Filter Restriction Indicator Kit Recommended.For a complete system, also order the 2-Way Electric Solenoid Valves for Auxiliary Valve andAuxiliary Hydraulic Lines.

505.00


758.00

AT356510 Mechanical Pattern Changer 967.00

AT130157 Metric O-Ring Kit See Parts

AT356249 Solenoid Control Kit for 2-Way Auxiliary HydraulicsFor use with Foot Pedal Switch and/or either joystick control switches

770.00


AT173678 3 Inch Seat Belt See Parts

AT341067 Cab Window Vandal Protection KitThe installation instruction number is T230180.

2,050.00

AT337329 Guard, Lower Front Window ISO Level IIInstallation Instructions T227262.

720.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT336154 Guard, Upper Front Window ISO Level II

Installation Instructions T227262.If not installed with the Lower Front Window Guard also order part numbers 4666224 and 4666223.

960.00

Overall Vehicle:

AT341089 Oil Sampling ValvesInstallation Instructions T230188.

105.00



01 May 2013US

ENGINE:Isuzu CC-4JG1 3.06 L # certifiedto IT4 / Stage IIIB emissions54 SAE Net HPDirect InjectionAuxiliary Pump DriveAntifreeze Protection to -34degrees F (-37 degrees C)Single Dry-Type Air FilterElectric Fuel ShutoffLow-Noise Fan with GuardFull Flow Oil FilterHeavy-Duty Low MaintenanceBatteries (180 Minute Reserve)Fuel FilterIsolation MountedRadiator/Oil Cooler Trash ScreenUnderhood Muffler with VerticalExhaust50 Amp Alternator - 24 VoltAutomatic Belt Tension DeviceWater SeparatorHYDRAULICS:Open Center with Two VariableDisplacement PumpsHydraulic Shut-Off LeverHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionBoom Reduced-Drift ValvesUNDERCARRIAGE:600 mm (24 In.) Track ShoesFront Track GuidePropel Motor ShieldPlanetary Final DriveTwo-Speed PropelAxial Piston Propel MotorBackfill BladeUPPERSTRUCTURE:Rearview Mirrors (right, left,and rear)Door, Tropical, Left-HandToolboxVandal Locks for:

Cab DoorService DoorsFuel Cap

Hydraulic ReservoirToolbox

Work lights:One Mounted on FrameOne Mounted on Boom

Counterweight 3,040 lbs. (1,380kg)FRONT ATTACHMENTS:Independent Swing BoomWC Thermal Spraying of BucketJointBucket Clearance adjustmechanismDirt Seal on all Bucket PinsMonolithically cast bucket link3.72 M (12 ft. 3 in) One PieceBoomLess ArmLess BucketOPERATOR'S STATION:Adjustable Control Position(Seat to Pedals)3" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable FabricSuspension SeatMultifunction, Color LCD MonitorSystem with:

Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle Indicator

Alternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour Meter

Mode Selection:One Work ModeTwo Power ModesNumerous Attachment Modes

Auto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center (MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Windowwith SunshadeFour Fluid-Filled Elastic MountsEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. US/Canadian Port of Entry except where noted.See DEALER-INSTALLED ATTACHMENT section for additional source notes.

3280FF ZAXIS 85USB-3 EXCAVATOR 117,368.00

TRACK SHOES3205 600 mm (24 In.) Triple Semi-Grouser Shoes w/ Blade In Base Price

3265 450 mm (18 In.) Rubber Pads w/ Blade 2,185.00


ZAXIS 85USB-3 EXCAVATOREquipment for Base Machine

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TRACK SHOES Continued...Steel track shoes with vulcanized rubber pads bonded to top of shoes.

3275 450 mm (18 In.) Continous Rubber Belt w/ BladeLong lead time required.

4,920.00

ARMS7001 Less Arm, Bucket Cylinder, Bucket Linkage and All Attaching Pins and Hoses In Base Price



OPTIONAL EQUIPMENT--ORDER AS DESIREDNon-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support isavailable by calling 1-866-213-3373.




Buckets, Heavy-Duty:


ZAXIS 85USB-3 EXCAVATORContinued

01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT384251 24 In (610 mm), 0.31 yd3 (0.24 M3) Heavy-Duty BucketIncludes Five (5) Fanggs Teeth (TF23D).

2,565.00

AT384253 30 In (762 mm), 0.41 yd3 (0.31 M3) Heavy-Duty BucketIncludes Six (6) Fanggs Teeth (TF23D).

2,709.00

AT384255 36 In (914 mm), 0.51 yd3 (0.39 M3) Heavy-Duty BucketIncludes Seven (7) Fanggs Teeth (TF23D).

2,962.00

Buckets, Ditching:

AT339016 48 In (1219 mm), 0.64 yd3 (0.49 M3) Ditching Bucket 2,335.00

Hydraulics:

AT350366 Auxiliary Hydraulic Lines for both Short & Long ArmsRequires some mounting fabrication.

2,387.00

AT356391 Foot Pedal Control Kit for Meterable Two-Way HydraulicsRecommended: Hydraulic Filter Restriction Indicator KitDoes not require a solenoid kit.

1,382.00

AT196587 Foot Pedal Switch for 1-Way Control of Auxiliary ValveInstallation instructions T161995.Average installation, 1 hour.For customers who want an auxiliary valve with foot pedal control of attachments that require1-direction on/off control without metering.Includes foot switch and wiring harness.

ALSO ORDER:Hydraulic Filter Restriction Indicator Kit Recommended.For a complete system, also order the 2-Way Electric Solenoid Valves for Auxiliary Valve andAuxiliary Hydraulic Lines.

505.00


758.00

AT356510 Mechanical Pattern Changer 967.00

AT130157 Metric O-Ring Kit See Parts

AT356249 Solenoid Control Kit for 2-Way Auxiliary HydraulicsFor use with Foot Pedal Switch and/or either joystick control switches

770.00



Overall Vehicle:

4712722 Cab FOPS Guard Kit See Parts

AT341089 Oil Sampling ValvesInstallation Instructions T230188.

105.00



01 May 2013US



01 May 2013US

HYDRAULICS:Open Center, Load Sensing withVariable Displacement PumpsHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionAdjustable Flow for AttachmentsThrough MonitorBoom and Arm Reduced DriftValvesAuto Power LiftHydraulic Tank Site Gauge5,000 Hour Hydraulic Oil ChangeInterval

UNDERCARRIAGE:Two Speed Propel with Auto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesProvisions for Tie DownsX-Frame Car BodyHydraulic Track AdjusterNine Lower RollersTwo Upper RollersSpring Applied HydraulicReleased Propel Brake

UPPER STRUCTURE:*Right, Left and CounterweightMirrorsToolboxVandal Locks for:

Cab DoorService DoorsTool Box

Counterweight, 11,270 lbs.(5,112 kg)Work Lights:


Remote Mounted Engine Oil and

Fuel Filters


OPERATOR'S STATION:*ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage ServiceAdjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMultifunction, Color LCD MonitorSystem with:

Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle Indicator

Alternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour Meter



CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)



4260FF ZAXIS 250 LC-5 EXCAVATOR 225,468.00

ENGINE1090 Engine, Isuzu AH-4HK Meets IT4 / Stage IIIB emissions

Isuzu AH-4HKCertified to EPA Interim Tier 4 emissions188 Net Rated hp (ISO 9249)TurbochargerElectronic Engine Control Unit

18,818.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Auto-Idle SystemAntifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel Particulate Filter with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change Interval*70% (35 degrees) Off Level CapabilityNote: For use only in areas where EPA Interim Tier 4/EU Stage IIIB is required.


-1,529.00








In Base Price




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


Recommended for general conditions and soft terrain.-1,194.00


In Base Price



BOOM6801 Less Boom


In Base Price




7160 2.96 M (9 Ft. 9 In.) Arm with Bucket Cylinder and Linkage 13,118.00

7180 3.61 M (11 Ft. 10 In.) Arm with Bucket Cylinder and LinkageNot recommended for impact (hammer) or high density material applications.

15,413.00





6,161.00


6,464.00




6,574.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BUCKETS Continued...


7,440.00

8340 48 In. (1219 mm), 1.39 Yd3 (1.06 M3) Heavy-Duty BucketIncludes Six (6) Esco Super-V EV39SYL Teeth

7,820.00


8,157.00

8420 36 In. (914 mm), 1.30 Yd3 (0.99 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) Esco Super-V EV39SYL Teeth

7,725.00


8,247.00

8440 48 In. (1219 mm), 1.88 Yd3 (1.44 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) Esco Super-V EV39SYL Teeth

8,660.00


10,511.00

8480 48 In (1219 mm), 1.57 yd3 (1.20 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil)

8,684.00


9,028.00




727.00




9700 Chrome Exhaust 420.00


No Charge


OPTIONAL MACHINE INFORMATIONNon-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support is



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL MACHINE INFORMATION Continued...available by calling 1-866-213-3373.



AT339182 24 In (610 mm), 0.75 yd3 (0.57 M3) Heavy-Duty, High-Capacity BucketIncludes Three (3) John Deere TK-Series Fanggs Teeth (TK400FD).

6,406.00

AT339186 30 In (762 mm), 1.02 yd3 (0.78 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK400FD).

6,840.00


7,384.00

AT339191 42 In (1067 mm), 1.59 yd3 (1.22 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK400FD).

7,917.00


7,774.00

AT339193 48 In (1219 mm), 1.88 yd3 (1.44 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK400FD).

8,340.00


8,099.00


9,500.00


AT339173 36 In (914 mm), 0.97 yd3 (0.74 M3) Heavy-Duty BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK450FD)

6,027.00

AT339176 42 In (1067 mm), 1.19 yd3 (0.91 M3) Heavy-Duty BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK450FD).

7,087.00

AT339178 48 In (1219 mm), 1.39 yd3 (1.06 M3) Heavy-Duty BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK550FD)

7,483.00


7,817.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Buckets, Side Cutters:

AT342511 Edge Protector Kit 399.00

AT342512 Side-Cutter Kit, 3 inch 485.00


Guards:


2,533.00

Hydraulic Couplers:



1,015.00



1,871.00



9,149.00



9,149.00



11,298.00



11,298.00

Hydraulics:




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT343990 Auxiliary Hydraulics, Attachment Combination Kit

Requires Auxiliary High-Flow Hydraulic Lines.Allows for a combination of attachments (i.e. hammer and thumb) to be connected to the high-flowlines, ready for operation.Kit includes parts to replace the arm tube of the high-flow hydraulic lines with a short tube and usesthe existing stop valves to shut-off thumb operation when not in use.

375.00

AT390844 Auxiliary Lines, High-Flow for 2.96 M Arm 5,627.00


AT300471 Boom Cylinder Anti-Drift Valve with Plumbing and Hardware 3,008.00


505.00


913.00


768.00

AT390797 Foot Control, Two-Way HydraulicsHydraulic Flow can be controlled by the monitor setting.If installing kit without auxiliary hydraulic lines also order the following parts: 4239976, 4208313,4453063, 4654406, and (3) A852133

1,931.00


758.00


967.00


AT327836 Two-Pump Combined Flow PipingFor attachments that require additional hydraulic flow.#Do not use with DPF Load Valve kit ETN92612#

1,625.00







712.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Overall Vehicle:


AT421344 Undercovers, Heavy-DutyPlease see the parts catalog for undercover installation layout.

3,607.00




ETN87389 Auxilary Counterweight, 2250 lbs.,Bottom MountParts are primed only (contact GR Mfg for paint color).

6,440.00


AT401260 Guard, Slant Top Rub RailsParts are primed only (contact GR Mfg for paint color).

1,908.00



01 May 2013US


UNDERCARRIAGE:32 In. (800 mm) Triple GrouserShoesTwo Speed Propel with Auto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesProvisions for Tie DownsX-Frame Car BodyHydraulic Track AdjusterEight Lower RollersTwo Upper RollersSpring Applied HydraulicReleased Propel Brake



Counterweight, 12813 lbs. (5,812kg)Work Lights:



Fuel Filters


OPERATOR'S STATION:*ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage ServiceAdjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMulti-Function, Color LCDMonitor System with:





CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)





Isuzu AH-4HKCertified to EPA Interim Tier 4 emissions188 Net Rated hp (ISO 9249)Turbocharger

21,792.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Electronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel Particulate Filter with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change Interval*70% (35 degrees) Off Level CapabilityNote: For use only in areas where EPA Interim Tier 4/EU Stage IIIB is required.


-1,529.00





In Base Price



Recommended for general conditions and soft terrain.-1,249.00


In Base Price



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TRACK SHOES Continued...



BOOM6801 Less Boom


In Base Price






18,424.00





6,847.00


7,070.00




6,770.00


7,661.00

8340 48 In. (1219 mm), 1.39 Yd3 (1.06 M3) Heavy-Duty Bucket 8,055.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BUCKETS Continued...Includes Six (6) Esco Super-V EV39SYL Teeth


8,401.00

8420 36 In. (914 mm), 1.30 Yd3 (0.99 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) Esco Super-V EV39SYL Teeth

7,956.00


8,493.00


8,918.00




727.00






No Charge


OPTIONAL MACHINE INFORMATIONNon-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support isavailable by calling 1-866-213-3373.


Buckets, Heavy-Duty, High-Capacity:Buckets come standard with horizontal wear strips.



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339182 24 In (610 mm), 0.75 yd3 (0.57 M3) Heavy-Duty, High-Capacity BucketIncludes Three (3) John Deere TK-Series Fanggs Teeth (TK400FD).

6,406.00


6,840.00


7,384.00


7,917.00


8,340.00



6,027.00


7,087.00


7,483.00


7,817.00

Buckets, Side Cutters:




Guards:


2,533.00

Hydraulic Couplers:



1,015.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulic Thumb Kits:Please click on the following link to access the freight rate tables.


1,871.00



9,149.00



9,149.00



11,298.00



11,298.00

Hydraulics:



748.00





505.00


913.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT390718 Control Solenoids for 2-Way Auxiliary Hydraulics

Monitor can be used to control hydraulic flow.Can be used with either right-hand or left-hand control handle.

768.00

AT390797 Foot Control, Two-Way HydraulicsHydraulic Flow can be controlled by the monitor setting.If installing kit without auxiliary hydraulic lines also order the following parts: 4239976, 4208313,4453063, 4654406, and (3) A852133

1,931.00


758.00


967.00



1,625.00







712.00

Overall Vehicle:



3,607.00



G.R. Manufacturing, Inc.4800 Commerce DriveTrussville, Alabama 35173



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...Phone: (800)841-8001Fax: (205)655-8005

ETN87389 Auxilary Counterweight, 2250 lbs.,Bottom MountParts are primed only (contact GR Mfg for paint color).

6,440.00



1,908.00



01 May 2013US


UNDERCARRIAGE:32 In. (800 mm) Triple GrouserShoesTwo Speed Propel with Auto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainThree Track GuidesProvisions for Tie DownsX-Frame Car BodyHydraulic Track AdjusterEight Lower RollersTwo Upper RollersSpring Applied HydraulicReleased Propel Brake



Counterweight, 15,274 lbs.(6.928 kg)Work Lights:



Fuel Filters


OPERATOR'S STATION:*ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage ServiceAdjustable Control Positions(Levers to Seat, Seat to Pedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversSwitches for Auxiliary HydraulicControl on RH Pilot LeverDeluxe Adjustable Cloth Seatwith Suspension, RecliningBackrest, and HeadrestMulti-Function, Color LCDMonitor System with:





CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)





Isuzu AH-6HKCertified to EPA Interim Tier 4 emissions271 Net Rated hp (ISO 9249)Turbocharger

26,073.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ENGINE Continued...Electronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater Separator*Underhood Diesel Particulate Filter with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change Interval*70% (35 degrees) Off Level CapabilityNote: For use only in areas where EPA Interim Tier 4/EU Stage IIIB is required.

1060 Engine, Isuzu AA-6HK1 Meets Tier 2 / Stage II emissionsIsuzu AA-6HK1Meets Tier 2 / Stage II emissions237 Net Rated hp (ISO 9249)TurbochargerElectronic Engine Control UnitAuto-Idle SystemAntifreeze Protection to -34°F (-37°C)Enclosed Fan GuardDual Element Dry-type Air Filter with Restriction IndicatorFull Flow Oil FilterDouble Fuel FilterWater SeparatorUnderhood Muffler with Curved ExhaustSide by Side by Side Radiator, Oil Cooler, Intercooler with Dust NetGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil Change Interval*70% (35 degrees) Off Level CapabilityNote: For use in areas where EPA Tier 3/EU Stage IIIA or EPA Interim Tier 4/EU Stage IIIB is notrequired.

-2,294.00








In Base Price




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

TRACK SHOES3310 600 mm (24 In.) Triple Semi-Grouser Shoes -1,975.00

3330 700 mm (28 In.) Triple Semi-Grouser Shoes -1,292.00

3320 700 mm (28 In.) Single-Bar, Heavy-Duty Chain and Shoes 8,790.00

3350 800 mm (32 In.) Triple Semi-Grouser Shoes In Base Price



BOOM6801 Less Boom


In Base Price







22,169.00





7,270.00


7,376.00





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BUCKETS Continued...

8270 60 In. (1524 mm), 2.78 Yd3 (2.13 M3) General-Purpose, High-Capacity BucketIncludes Seven (7) Hensley-Style Fanggs (TF400)

10,321.00

8340 48 In. (1219 mm), 1.88 Yd3 (1.44 M3) Heavy-Duty BucketIncludes Six (6) Hensley-Style Fanggs (TF400)

8,437.00

8350 54 In. (1372 mm) 2.18 Yd3 (1.67 M3) Heavy-Duty BucketIncludes Six (6) Hensley-Style Fanggs (TF400)

9,279.00

8430 42 In. (1067 mm), 1.74 Yd3 (1.33 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) Hensley-Style Fanggs (TF400)

9,061.00

8440 48 In. (1219 mm), 2.07 Yd3 (1.58 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) Hensley-Style Fanggs (TF400)

9,719.00

8450 54 In. (1373 mm), 2.41 Yd3 (1.84 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) Hensley-Style Fanggs (TF400)

10,202.00


14,242.00

8520 60 In (1524 mm), 2.66 yd3 (2.03 M3) Heavy-Duty, High-Capacity BucketOnly available for Unit 20 (Brazil)

15,120.00


15,466.00


Only available for ME front

17,041.00




727.00






No Charge


OPTIONAL MACHINE INFORMATIONNon-English Operator's ManualsTranslated Customer Delivery Packets can be ordered using the John Deere Technical Information



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

OPTIONAL MACHINE INFORMATION Continued...Bookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support isavailable by calling 1-866-213-3373.


Buckets, General-Purpose, High-Capacity:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339215 60 In (1524 mm), 2.78 yd3 (2.13 M3) General-Purpose, High-Capacity BucketIncludes Seven (7) John Deere TK-Series Fanggs Teeth (TK450FD).

10,815.00



8,809.00


9,441.00


10,158.00

AT428731 54 In (1372 mm), 2.38 yd3 (1.82 M3) Standard Duty BucketOnly available for Unit 20 (Brazil)

13,026.00


10,692.00


13,856.00


14,182.00


15,670.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Buckets, Heavy-Duty:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.


7,670.00


8,240.00


8,760.00


9,218.00





Guards:


2,533.00

Hydraulic Couplers:



1,015.00



1,871.00



10,223.00



10,223.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT379662 Hydraulic Thumb Kit, Progressive

Teeth matching between the bucket and thumb will depend on the bucket width, number of teeth, andtooth spacing.


12,268.00



12,268.00

Hydraulics:



748.00

AT419615 Auxiliary Lines, High-Flow for 2.67 M ArmIncludes 1 In. diameter lines from the auxiliary spool in main control valve along the boom ending onthe arm and 1.25 In. return line routed directly to return filter piping for low pressure return. Alsoincludes 2 relief valves and 2 shutoff valves located on end of arm.Recommend Hydraulic Filter Restriction Indicator Kit.

6,493.00


6,637.00


6,781.00



505.00


913.00


768.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT327632 Filter Restriction Indicator

This kit is recommended when the excavator will be equipped with front attachment such as crushers,thumbs, hammers, log loaders, etc.Installation Instruction T229238

758.00

AT390798 Foot Control, Two-Way HydraulicsIf ordering for the 470 excavators also order 4659600 and 4659601.If installing kit without auxiliary hydraulic lines also order the following parts: 4239976, 4208913,4453063, 4654406, and (3) A852133.

1,931.00


967.00



1,625.00







712.00

Overall Vehicle:



3,902.00






01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...

ETN85108 Auxilary Counterweight, 2000 lbs. Bottom MountParts are primed only (contact GR Mfg for paint color).

6,440.00

ETN85109 Auxilary Counterweight, 4300 lbs, Bottom Mount, 22m ArmParts are primed only (contact GR Mfg for paint color).

10,864.00



2,100.00



01 May 2013US




01 May 2013US

ENGINE:Isuzu 6UZ1 certified to IT4 /Stage IIIB emissions367 Horsepower Net Peak Power(ISO 9249)TurbochargerCharge Air CoolerAuto-Idle SystemCool-on-Demand Hydraulic-DrivenFanHydraulic Fan ReverserAntifreeze Protection to -34F(-37C)Enclosed Fan GuardHinged A/C Condenser and FuelCoolerDual Element Dry-type Air Filterwith Restriction IndicatorFull Flow Oil FilterFuel Filters with WaterSeparatorsUnderhood After Treatment Devicewith Curved ExhaustHeavy Duty, Low MaintenanceBatteriesGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil ChangeInterval70% (35) Off Level CapabilityHYDRAULICS:Open Center, Load Sensing withVariable Displacement PumpsHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionAdjustable Flow for AttachmentsThrough MonitorBoom and Arm Reduced DriftValvesHydraulic Tank Site Gauge4,000 Hour Hydraulic Oil ChangeIntervalUNDERCARRIAGE:Two Speed Propel withAuto-ShiftAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed and Lubricated TrackChainFront and Center Track GuidesX-Frame Car BodyHydraulic Track Adjuster

Nine Lower RollersThree Upper RollersSpring Applied HydraulicReleased Propel BrakeUPPER STRUCTURE:Right and Left MirrorsToolboxVandal Locks for:Cab DoorService DoorsFuel CapTool BoxWork Lights:

One Mounted on FrameTwo Mounted on BoomTwo Mounted on Cab

Debris Screen in Side PanelRemote Mounted Engine OilFilterFRONT ATTACHMENT:Centralized Lubrication SystemDirt Seals on Bucket PinsLess BoomLess ArmLess BucketOPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat toPedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversDeluxe Adjustable, Heated ClothSeat with Air Suspension,Reclining Backrest, Headrest,and Adjustable Lumbar SupportMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible Alarm

Fuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAuto Shut Down IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesBoom ModeNumerous Attachment ModesEngine Oil Level IndicatorEngine Coolant Level IndicatorAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center(MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. US/Canadian Port of Entry for Complete Machine.F.O.B. Kernersville, North Carolina for 470 boom and arm, or Port of Entry depending onconfiguration.See DEALER-INSTALLED ATTACHMENT section for additional source notes.



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE Continued...4290FF ZAXIS 470 LC-5 EXCAVATOR 465,509.00





In Base Price


MAIN FRAME2620 Standard main frame and counterweight w/o removal device

Will not accept counterweight removal device.-4,415.00

2625 Modified Mainframe and CounterweightWill accept counterweight removal device.

In Base Price

2650 Modified Mainframe and Counterweight with Counterweight Removal DeviceIncludes factory installed counterweight removal device.

8,889.00

TRACK SHOES3275 750 mm (30 In.) Triple-Bar Semi-Grouser Shoes

Recommended for rocky terrain, hard ground and stumps.No Charge

3350 900 mm (36 In.) Triple-Bar Semi-Grouser ShoesRecommended for general conditions and soft terrain.

In Base Price

BOOM6801 Less Boom

Excludes Arm Cylinder, Boom Cylinders and Plumbing on Boom.Includes Pin Connecting Boom to Mainframe and the Two Boom Cylinder Pins.Code 9010 Boom Cylinders recommended.The "Hydraulic Filter Restriction Indicator" in DEALER-INSTALLED ATTACHMENTS isrecommended.

In Base Price

6840 6.3M (20 ft 8 in) One Piece, Mass Excavating (ME) Boom with Arm Cylinder and PlumbingRequires code 7275, Mass-Excavating (ME) Arm.Check availability, may require long lead time.

70,601.00

6940 7.0 M (23 ft.) HD Boom with Arm Cylinder and PlumbingSimilar to the Heavy-Duty Boom on Previous Series

71,945.00

ARMS



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARMS Continued...7001 Less Arm, Bucket Cylinder, Bucket Linkage and All Attaching Pins and Hoses


7160 2.9 M (9 Ft. 6 In.) Arm Assembly w/ Bucket Cylinder & Linkage 34,072.00

7180 3.4 M (11 Ft. 2 In.) Arm with Bucket Cylinder and LinkageRecommended for hammer or high density material applications.

34,509.00

7250 3.9 M (12 Ft. 10 In.) Arm Assembly w/ Bucket Cylinder & Linkage 34,755.00

7275 2.9 M (9 Ft. 6 In.) Mass Excavating (ME) Arm with Bucket Cylinder and LinkageRequires Code 6840 Mass Excavating Boom.Check availability, may require long lead time.

39,469.00

7285 4.9 M (16 Ft. 1 In.) Arm with Bucket Cylinder and LinkageRequires Long Lead Time, check with your dealer for availability.Will not accept 450 buckets due to the pin diameters. Use 350-size buckets.

34,985.00




16,466.00

8380 72 In. (1830MM) 3.97 Yd3 (3.04 M3) Heavy-Duty, High-Capacity BucketIncludes Seven (7) Esco Super-V EV43SYL Teeth

17,808.00






Guards:


2,533.00

Hydraulic Couplers:




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulic Thumb Kits:Please click on the following link to access the freight rate tables.



13,990.00

Hydraulics:

AT335922 Accumulator KitRequires the installation of High-Flow Auxiliary Hydraulic Lines prior to installing this kit.

6,437.00

AT338257 Anti-Drift Valve with Plumbing and Hardware, Arm CylinderInstallation Instruction T228319

3,496.00

AT316251 Boom Anti-Drift KitInstallation Instruction T217533

3,887.00


505.00

AT390774 Control Handle for Auxiliary Hydraulics, Right-HandAlso order solenoids for auxiliary hydraulics.Recommended for use with auxiliary hydraulic lines.

256.00

AT330567 Control Solenoids for 2-Way Auxiliary HydraulicsMonitor can be used to control hydraulic flow.Can be used with either right-hand or left-hand control handle.Installation Instructions T223910.

768.00

AT327632 Filter Restriction IndicatorThis kit is recommended when the excavator will be equipped with front attachment such as crushers,thumbs, hammers, log loaders, etc.Installation Instruction T229238

758.00

AT418864 High-Flow Auxiliary Hydraulic Lines for 3.4 M ArmIncludes 1.25 in ID piping with selector valve for direct return to tank and arm mounted shut offvalves.Includes In Line Return Filter for Direct Return to Tank.Includes dual pump combined flow functionality. Also, includes adjustable relief circuit which isoperator activated through the monitor.

12,111.00

AT418865 High-Flow Auxiliary Hydraulic Lines for 3.9 M ArmIncludes 1.25 in ID piping with selector valve for direct return to tank and arm mounted shut offvalves.Includes In Line Return Filter for Direct Return to Tank.Includes dual pump combined flow functionality. Also, includes adjustable relief circuit which isoperator activated through the monitor.

12,227.00






01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT390824 Guard, Lower Front Window ISO Level II 1,028.00



AT390720 Mechanical Pattern Changer 1,314.00

Overall Vehicle:







01 May 2013US




01 May 2013US

ENGINE:Isuzu 6WG1 certified to IT4 /Stage IIIB emissions463 Horsepower Net Peak Power(ISO 9249)TurbochargerCharge Air CoolerAuto-Idle SystemCool-on-DemandHydraulic-Driven FanHydraulic Fan ReverserAntifreeze Protection to -34degrees F (-37 degrees C)Enclosed Fan GuardHinged A/C Condenser andFuel CoolerDual Element Dry-type AirFilterwith Restriction IndicatorFull Flow Oil FilterFuel Filters with WaterSeparatorsUnderhood After Treatment Devicewith Curved ExhaustHeavy Duty, LowMaintenance BatteriesGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine OilChange Interval70% (35 degrees) Off LevelCapabilityHYDRAULICS:Open Center, Load Sensing withVariable Displacement PumpsHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionAdjustable Flow forAttachments Through MonitorBoom and Arm ReducedDrift ValvesHydraulic Tank Site Gauge4,000 Hour Hydraulic OilChange IntervalUNDERCARRIAGE:Two Speed PropelAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesX-Frame Car BodyHydraulic Track Adjuster

Spring AppliedHydraulic Released Propel Brake

UPPER STRUCTURE:Right and Left MirrorsToolboxVandal Locks for:Cab DoorService DoorsFuel CapTool BoxWork Lights:


Debris Screen in Side PanelRemote Mounted Engine OilFilterFRONT ATTACHMENT:Centralized Lubrication SystemBoom Cylinders with PlumbingDirt Seals on Bucket PinsLess BoomLess ArmLess Bucket

OPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat toPedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversDeluxe Adjustable, Heated ClothSeat with Air Suspension,Reclining Backrest, Headrest,and Adjustable Lumbar SupportMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure Warning

Indicator with Audible AlarmFuel Gauge with Low FuelIndicatorWork Mode IndicatorAuto Idle IndicatorAuto Shut Down IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesBoom ModeNumerous Attachment ModesEngine Oil Level IndicatorEngine Coolant Level IndicatorAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center(MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)






In Base Price


MAIN FRAME2625 Standard main frame and counterweight

Will not accept counterweight removal device.In Base Price


22,902.00

TRACK SHOES3200 650 mm (26 In.) Double-Bar Semi-Grouser Shoes


3300 750 mm (30 In.) Double-Bar Semi-Grouser ShoesRecommended for general conditions.Long Lead Time.

-6,858.00

3350 900 mm (36 In.) Double-Bar Semi-Grouser ShoesRecommended for general conditions and soft terrain.

In Base Price

BOOM6801 Less Boom, Arm Cylinder, and Plumbing on Boom

Includes Boom Cylinders, Plumbing to Boom, and Pin Connecting Boom to Mainframe.Requires "Less Arm".The "Hydraulic Filter Restriction Indicator" in DEALER-INSTALLED ATTACHMENTS isrecommended.

In Base Price

6840 6.8 M (22 Ft. 4 In.) One Piece, Mass Excavating (ME) Boom with Arm Cylinder and PlumbingRequires code 7275, Mass-Excavating (ME) Arm.Check availability, may require long lead time.

96,723.00

6845 7.8 M (25 Ft. 7 In.) One Piece Boom with Arm Cylinder and Plumbing 89,351.00





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARMS Continued...7180 3.6 M (11 Ft. 10 In.) Arm with Bucket Cylinder and Linkage 55,318.00



7275 2.9 M (9 Ft. 6 In.) Mass Excavating (ME) Arm with Bucket Cylinder and LinkageRequires code 6850, Mass Excavating (ME) Boom

73,980.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED


Buckets, Extreme-Duty, Plate Lip:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339310 48 In (1219 mm), 3.39 yd3 (2.59 M3) Extreme-Duty, Plate-Lip BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.6 and 4.2 M Arms Only.

30,422.00

AT339312 48 In (1219 mm), 3.39 yd3 (2.59 M3) Extreme-Duty, Plate-Lip BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK700FD)For use on the 2.9 M Mass Excavating Arm Only.

31,736.00

AT339314 54 In (1372 mm), 3.96 yd3 (3.03 M3) Extreme-Duty, Plate-Lip Bucket

Includes Four (5) John Deere TK-Series Fanggs Teeth (TK700FD). For use on the 3.6 and 4.2 MArms Only.Includes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 2.9 M Mass Excavating Arm Only.

34,510.00

AT339316 54 In (1372 mm), 3.96 yd3 (3.03 M3) Extreme-Duty, Plate-Lip Bucket

Includes Four (5) John Deere TK-Series Fanggs Teeth (TK700FD). For use on the 3.6 and 4.2 MArms Only.

33,197.00

AT339318 60 In (1524 mm), 4.54 yd3 (3.47 M3) Extreme-Duty, Plate-Lip BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD)For use on the 2.9 M Mass Excavating Arm Only.

35,984.00


AT339293 36 In (914 mm), 2.29 yd3 (1.75 M3) Heavy-Duty, High-Capacity BucketIncludes Three (3) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

19,337.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT339295 42 In (1067 mm), 2.84 yd3 (2.17 M3) Heavy-Duty, High-Capacity Bucket

Includes Four (4) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

20,972.00

AT339297 48 In (1219 mm), 3.39 yd3 (2.59 M3) Heavy-Duty, High-Capacity BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

22,025.00

AT339299 54 In (1372 mm), 3.96 yd3 (3.03 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

23,487.00

AT339301 60 In (1524 mm), 4.54 yd3 (3.47 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

24,502.00

AT339304 72 In (1829 mm), 5.70 yd3 (4.36 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

28,726.00


31,413.00

AT339308 86 In (2184 mm), 5.77 yd3 (4.41 M3) Heavy-Duty, High-Capacity BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 2.9 M Mass Excavating Arm Only.

29,767.00


AT339278 36 In (914 mm), 1.59 yd3 (1.22 M3) Heavy-Duty BucketIncludes Three (3) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 5.3 M Arm Only.

13,516.00

AT339281 42 In (1067 mm), 1.98 yd3 (1.51 M3) Heavy-Duty BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 5.3 M Arm Only.

14,766.00


15,373.00

AT339285 54 In (1372 mm), 2.76 yd3 (2.11 M3) Heavy-Duty BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 5.3 M Arm Only.

16,921.00


17,628.00



Buckets, Truck Loading:Truck-loading buckets are not drilled to accept bolt-on sidecutters.



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339320 76 In (1931 mm), 5.02 yd3 (3.84 M3) Truck-Loading BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

21,543.00

AT339322 82 In (2083 mm), 5.50 yd3 (4.21 M3) Truck-Loading BucketIncludes Seven (7) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 3.6 and 4.2 M Arms Only.

23,103.00

Guards:


2,533.00

Hydraulics:


505.00


256.00












01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

REFERRAL ATTACHMENTS Continued...




01 May 2013US

ENGINE:Isuzu 6WG1 certified to IT4 /Stage IIIB emissions532 Horsepower Net Peak Power(ISO 9249)TurbochargerCharge Air CoolerElectronic Engine Control UnitAuto-Idle SystemCool-on-Demand Hydraulic-DrivenFanHydraulic Fan ReverserAntifreeze Protection to -34degrees F (-37 degrees C)Enclosed Fan GuardHinged A/C Condenser and FuelCoolerDual Element Dry-type Air Filterwith Restriction IndicatorFull Flow Oil FilterFuel Filters with WaterSeparatorsUnderhood After Treatment Devicewith Curved ExhaustHeavy Duty, Low MaintenanceBatteriesGlow Plug Start Aid50-Amp Alternator - 24 Volt500 Hour Engine Oil ChangeInterval70% (35 degrees) Off LevelCapabilityHYDRAULICS:Open Center, Load Sensing withVariable Displacement PumpsHydraulic Pilot ControlsAxial Piston Swing MotorMultiple Wet Disk Swing BrakeAuxiliary Valve SectionAdjustable Flow for AttachmentsThrough MonitorBoom and Arm Reduced DriftValvesHydraulic Tank Site Gauge4,000 Hour Hydraulic Oil ChangeIntervalUNDERCARRIAGE:Two Speed PropelAxial Piston Propel MotorsPropel Motor ShieldsPlanetary Final DrivesSealed Track ChainFront and Center Track GuidesX-Frame Car BodyHydraulic Track Adjuster

Spring Applied HydraulicReleased Propel BrakeUPPER STRUCTURE:Right and Left MirrorsToolboxVandal Locks for:Cab DoorService DoorsFuel CapTool BoxWork Lights:


Debris Screen in Side PanelRemote Mounted Engine OilFilterFRONT ATTACHMENT:Centralized Lubrication SystemBoom Cylinders with PlumbingDirt Seals on Bucket PinsLess BoomLess ArmLess BucketOPERATOR'S STATION:ZXLink Ultimate MachineMonitoring System w/ 3-yearMessage Service (Available inUnited States and Canada only)Adjustable Control Positions(Levers to Seat, Seat toPedals)4" Arm Rests Attached to SideConsolesPilot Control Shut-Off LeverShort Stroke, Low Effort PilotLeversDeluxe Adjustable, Heated ClothSeat with Air Suspension,Reclining Backrest, Headrest,and Adjustable Lumbar SupportMultifunction, Color LCD MonitorSystem with:Diagnostic CapabilitySystems Monitoring CapabilityMultiple Language CapabilityMaintenance TrackingEngine Coolant TemperatureGaugeEngine Coolant TemperatureWarning Indicator with AudibleAlarmEngine Oil Pressure WarningIndicator with Audible AlarmFuel Gauge with Low Fuel

IndicatorWork Mode IndicatorAuto Idle IndicatorAuto Shut Down IndicatorAlternator Charge IndicatorAir Filter RestrictionIndicatorFault Code Alert IndicatorCheck Engine IndicatorWiper Mode IndicatorWork Lights On IndicatorFuel Rate DisplayClockHour MeterMode Selection:One Work ModeThree Power ModesBoom ModeNumerous Attachment ModesEngine Oil Level IndicatorEngine Coolant Level IndicatorAuto-Climate Control/AirConditioner, Heater withPressurizerAM-FM RadioMachine Information Center(MIC)Windshield Wiper/Washer withIntermittent Speed12V-60W, 5 Amp Cell Phone PowerOutlet2 In. Retractable Seat BeltTinted Safety GlassHot/Cold Box CompartmentHornTwo Cup HoldersInterior LightCoat HookFloor MatMotion Alarm with Cancel SwitchTransparent Tinted Roof Hatchwith SunshadeEasy Access Air ConditioningFilter

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)





01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)






In Base Price


MAIN FRAME2625 Standard main frame and counterweight

Will not accept counterweight removal device.In Base Price


22,139.00

TRACK SHOES3200 650 mm (26 In.) Double-Bar Semi-Grouser Shoes


3300 750 mm (30 In.) Double-Bar Semi-Grouser ShoesRecommended for general conditions.Long Lead Time.

-5,555.00


In Base Price


8,995.00

BOOM6801 Less Boom, Arm Cylinder, and Plumbing on Boom

Includes Boom Cylinders, Plumbing to Boom, and Pin Connecting Boom to Mainframe.Requires "Less Arm".The "Hydraulic Filter Restriction Indicator" in DEALER-INSTALLED ATTACHMENTS isrecommended.

In Base Price

6850 7.1 M (23 Ft. 4 In.) One Piece Mass Excavating (ME) Boom with Arm Cylinder and PlumbingRequires code 7275, Mass-Excavating (ME) Arm.Check availability, may require long lead time.

129,835.00

6855 8.4 M (27 Ft. 7 In.) Standard One Piece Boom with Arm Cylinder and Plumbing 108,850.00

6870 10.4 M (32 ft. 10 in.) One Piece Boom with Boom Cylinders, Arm Cylinders, and Plumbing 128,693.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

BOOM Continued...Requires code 7265 or 7270.Includes remote grease bank.Includes unique lift chart for factory installed booms.Boom cylinders are unique to this boom.




7265 4.4 M. (14 Ft. 5 In.) Arm with Bucket Cylinder and Linkage 76,819.00

7270 5.4 M. (17 Ft. 9 In.) Arm with Bucket Cylinder and LinkageThe 5.4 M Arm requires 650-size buckets.

83,813.00

7275 2.95 M (9 Ft. 8 In.) Mass Excavating (ME) Arm with Bucket Cylinder and LinkageRequires code 6850, Mass Excavating (ME) Boom

80,777.00

OPTIONAL EQUIPMENT--ORDER AS DESIRED


Buckets, Extreme-Duty, Plate Lip:Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339350 48 In (1218 mm), 3.65 yd3 (2.79 M3) Extreme-Duty, Plate-Lip BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK700FD)For use on the 3.7 and 4.4 M Arms Only.

37,582.00

AT339352 48 In (1218 mm), 3.65 yd3 (2.79 M3) Extreme-Duty, Plate-Lip BucketIncludes Four (4) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 2.95 M Mass Excavating Arm Only.

37,061.00

AT339354 54 In (1372 mm), 4.27 yd3 (3.26 M3) Extreme-Duty, Plate-Lip BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

40,518.00

AT339356 54 In (1372 mm), 4.27 yd3 (3.26 M3) Extreme-Duty, Plate-Lip BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 2.95 M Mass Excavating Arm Only.

40,009.00

AT339358 60 In (1524 mm), 4.89 yd3 (3.74 M3) Extreme-Duty, Plate-Lip BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

42,104.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT339360 60 In (1524 mm), 4.89 yd3 (3.74 M3) Extreme-Duty, Plate-Lip Bucket

Includes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 2.95 M Mass Excavating Arm Only.

41,584.00

AT339363 72 In (1829 mm), 6.17 yd3 (4.72 M3) Extreme-Duty, Plate-Lip BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 2.95 M Mass Excavating Arm Only.

45,263.00


AT339334 36 In (914 mm), 2.48 yd3 (1.90 M3) Heavy-Duty, High-Capacity BucketIncludes Three (3) John Deere TK-Sereis Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

25,926.00


29,641.00


30,560.00

AT339340 54 In (1372 mm), 4.27 yd3 (3.26 M3) Heavy-Duty, High-Capacity BucketIncludes Five (5) John Deere TK-Series Fanggs Teeth (TK700FD.)For use on the 3.7 and 4.4 M Arms Only.

32,479.00

AT339342 60 In (1524 mm), 4.89 yd3 (3.74 M3) Heavy-Duty, High-Capacity Bucket 33,977.00


36,926.00

AT339346 80 In (2032 mm), 7.02 yd3 (5.37 M3) Heavy-Duty, High-Capacity BucketIncludes Seven (7) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

37,718.00

AT339348 90 In (2286 mm), 7.46 yd3 (5.70 M3) Heavy-Duty, High-Capacity BucketIncludes Seven (7) John Deere TK-Series Fanggs Teeth (TK600FD).For use on the 2.9 M Mass Excavating Arm Only.

36,565.00


AT339324 36 In (914 mm), 1.87 yd3 (1.43 M3) Heavy-Duty BucketIncludes Three (3) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 5.4 M Arm Only.

17,950.00


19,461.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT339328 48 In (1219 mm), 2.78 yd3 (2.13 M3) Heavy-Duty Bucket

Includes Four (4) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 5.4 M Arm Only.

20,427.00


21,815.00


23,115.00



Buckets, Truck Loading:Truck-loading buckets are not drilled to accept bolt-on sidecutters.Buckets come standard with horizontal wear strips.Vertical wear strips in lieu of horizontal are available at no additional charge.The switch to vertical wear strips MUST be indicated in the comments section of your order.

AT339368 84 In (2134 mm), 5.66 yd3 (4.33 M3) Truck-Loading BucketIncludes Six (6) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

29,097.00

AT339372 92 In (2337 mm), 6.28 yd3 (4.80 M3) Truck-Loading BucketIncludes Eight (8) John Deere TK-Series Fanggs Teeth (TK700FD).For use on the 3.7 and 4.4 M Arms Only.

31,054.00

Guards:


2,533.00

Hydraulics:


505.00


256.00








01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...ETN93549 MP3 Player Field Kit 156.00







01 May 2013US

ENGINE:Yanmar 3THV70 3-52.1 cu. in.

(0.85 l)14.8 ISO9249 Net HP (11.0 kW)Certified to EPA Tier 4 FinalEngine CoolantSingle Dry-Type Air FilterElectric Fuel ShutoffFan GuardFull Flow Oil FilterLow Maintenance BatteryFuel Filter & Water SeparatorIsolation MountedUnder Hood Muffler40 Amp Alternator - 12 VoltGlow Plugs Cold Start Aid

HYDRAULICS:Open Center with Two Variable

Displacement Pumps andOne Fixed Gear Pump

Hydraulic Pilot Controls forBoom, Arm, Bucket, Swing,and Propel


Auxiliary Function FootControl

Boom Swing Foot ControlAxial Piston Swing MotorWet Disk Swing BrakePropel BrakeAuxiliary Valve SectionAuxiliary Hydraulic Lines with

Release Under PressureHydraulic Quick Couplers to

End of Boom

UNDERCARRIAGE:9.1 in. (230 mm) Rubber TrackBackfill BladePropel Motor ShieldPlanetary Final DriveTwo Speed Travel5 ft. 2 in. (1.57 m) Overall

Track Length4 ft. (1.21 m) Ground

Contact LengthAxial Piston Propel Motor

UPPERSTRUCTURE:360 Degree Upper Structure


(70 degree left and50 degreeright

rotation)ROPS/OPG/FOPS CanopyWork light, mounted on BoomCounterweight 507 lb.

(230 kg.)Toolbox

FRONT ATTACHMENTS:Boom 6 ft. (1.82 m)Arm 3 ft. 1 in. (0.93 m)Mechanical Quick Coupler

OPERATOR'S STATION:Adjustable Vinyl Seat- fore and aft

2 in. Retractable Seat BeltHornHour MeterInstrumentation LightsMonitor System with:

Alternator Charge WarningLight

Engine Coolant TemperatureGauge andWarning Lightand Alarm

Engine Oil Pressure WarningLight

Travel Mode IndicatorFuel Gauge and Warning LightEngine Preheat IndicatorLight Switch with "On"

IndicatorTwo Travel Modes with Foot

Selection SwitchPropel Motion Alarm with CancelCupholder12 Volt Cell Phone OutletOperator manual storage in back

of seat

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)




3128 9 in. (230 mm) Steel Track with Triple Semi-Grouser Shoes 462.00

3130 Rubber City PadsNOTE:* Shipped from the nearest port* Factory Hydraulic Clamp installation is not available; dealer-installed only* Steel track shoes with vulcanized rubber pads bonded to top of shoes.* Long lead-time item; contact Order Fulfillment for availability

2,239.00




01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ARM Continued...7120 Long Arm 3 ft. 8 in. (1.13 m) and Extra Counterweight 176 lb. (80 kg)

NOTE:* Long lead-time item; contact Order Fulfillment for availability.* Extra counterweight extends 5 in. (115 mm) beyond width of tracks when upper structure is rotatedto the side

1,247.00

SEAT4140 Standard Seat - Vinyl In Base Price

4145 Suspension Seat - VinylNOTE: Long lead-time item; contact Order Fulfillment for availability

321.00

EXPORT CODESTranslated Customer Delivery Packets can be ordered using the John Deere Technical InformationBookstore at http://www.johndeeretechinfo.com at no charge. The Translated Delivery Packetsinclude the Operator Manual, Decal Kit, Warranty Information Booklet, and Uptime MaintenancePlanner. Search for and order the Translated Delivery Packets by model and language that meetsyour customer requirements. A listing of all Translated Delivery Packets available can be found byselecting Translated Delivery Packets from the Manual Type dropdown list. Technical support isavailable by calling 1-866-213-3373.


Buckets:

AT316548G 12 In. (305 mm) Heavy Duty GREY Bucket;0.8 Cu. Ft. (0.027 Cu. M) (3 Teeth Included)

443.00


478.00


520.00

AT316547G 9 In. (229 mm) Heavy Duty GREY Bucket; 0.6Cu. Ft.(0.020 Cu. M)

399.00

Clamps:


623.00



01 May 2013US

CODE DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AT349584 Hydraulic Clamp, Short Arm - Factory Installation Fee

NOTE:* Must also order Hydraulic Clamp* Cannot be ordered with Rubber Crawler Pads, 3130

508.00

AT318254G Hydraulic GREY Clamp, Short and Long Arms 1,651.00

Engine:


See Parts



TY25876 Heavy Duty BatteryNOTE:* Recommended for Cold Start climates* Requires 2 Electrical Connectors (Part PMA4U)

See Parts



AT337084 Front Protection Screen for Canopy (17 CE)NOTE:* Required when a Hydraulic Breaker is equipped on a ZX17U-2 Compact Excavator with a canopy

670.00



01 May 2013US




01 May 2013US

CONSTRUCTION PRODUCTS C-3-ZAXIS 130-5-1 ZAXIS 130-5 ... · (Subject To Change Without Notice)...

Documents

Transcript of CONSTRUCTION PRODUCTS C-3-ZAXIS 130-5-1 ZAXIS 130-5 ... · (Subject To Change Without Notice)...