CONSTANT PRESSURE CONTROL - Flomatic … 4...Cycle® Gard ®CNA Systems requiring higher flow...
4
Cycle Gard ® I Cycle Gard ® II Hydrostat ® Cycle Gard ® IV Cycle Gard ® CI Cycle Gard ® CNA HY-FLOW TM BOOSTER-IT ® High Quality Valves Built to Last...
Transcript of CONSTANT PRESSURE CONTROL - Flomatic … 4...Cycle® Gard ®CNA Systems requiring higher flow...
Flomatic Corp.15 Pruyn’s Island DriveGlens Falls, N.Y. 12801-4424800-833-2040518-761-9797 • Fax 518-761-9798www.flomatic.com • e-mail: [email protected]
Cycle Gard® I Cycle Gard® II Hydrostat®
Cycle Gard® IV Cycle Gard® CI Cycle Gard®CNA
HY-FLOWTM BOOSTER-IT®
DIRECT ACTING PUMP CONTROL VALVENPT ID x UNIONPressure: 15 - 75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1/2” C152099E 1/2” C152199E3/4” C152000E 3/4” C152100E1” C152001E 1” C152101E11/4” C152002E 11/4” C152102E11/2” C152003E 11/2” C152103E2” C152004E 2” C152104 E
NPT ID x NPT OD DUAL PURPOSE THREADSPressure: 15-75 Pressure: 15 - 150 PSI
SIZE PART # SIZE PART #1/2” C152099ET 1/2” C152199ET3/4” C152000ET 3/4” C152100ET1” C152001ET 1” C152101ET
DIRECT ACTING PUMP CONTROLVALVE REGULATOR VALVE WITH TAPPINGS
THREADED NPT ID x UNIONPressure: 15 - 75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1” CB152001E 1” CB152101E
NPT ID x NPT ODPressure: 15-75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1” CB152001ET 1” CB152101ET
BOOSTER-IT TM WATER SYSTEM PUMP CONTROL VALVE*
SIZE PART #
3/4” C1541001” C15410111/4” C15410211/2” C1541032” C154104
*with (2) 1/4” tappings on tank side
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI 150#
SIZE PART # PART #11/4” CN1010B11/2” CN1010C CN1011C2” CN1010D CN1011D21/2” CN1010E CN1011E3” CN1010F CN1011F4” CN1011G6” CN1011J8” CN1011K10” CN1011L12” CN1011M
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI 150#
SIZE PART # PART #11/4” CNA1010B11/2” CNA1010C2” CNA1010D CNA1011D21/2” CNA1010E CNA1011E3” CNA1010F CNA1011F4” CNA1011G6” CNA1011J8” CNA1011K10” CNA1011L12” CNA1011M
HIGH FLOW DIRECT ACTING PUMP CONTROL REGULATOR VALVE
THREADED FEMALE x FEMALE NPTPressure: Max 400 PSI
SIZE PART # SPRING RANGE11/4” C152002EHF 15 - 75 PSI11/4” C152102EHF 15 - 150 PSI
COMPACT PUMP PRESSURE / REGULATOR
THREADED FEMALE I.D. x MALE O.D.Pressure: Max 400 PSI
SIZE PART #
1“ F x 11/4” M C3100E1“ F x 11/4” M C3100EB**with (2) 1/4” tappings
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI
150# SIZE PART #
11/2” CIN1020C2” CIN1020D
GROOVED CONNECTIONSIZE PART #
2” CIN1020DG
SIZE PART #
3” CIN1021F4” CIN1021G6” CIN1021J8” CIN1021K
CYCLE GARD® HY-FLOWModel C152EHF
CYCLE GARD® I Model C152E
CYCLE GARD®IVModel CB152E
CYCLE GARD® II Model C152EHF
CYCLE GARD® CIModel CIN101
CYCLE GARD® CNA Model CNA 101N
BOOSTER-IT®
Model C154
CYCLE GARD® HYDROSTAT®
Model C3100
CONSTANT PRESSURE CONTROLW W W. F L O M A T I C . C O M
Flomatic can accept no responsibility for possible errors in cata-logues, brochures and other printed material. Flomatic reservesthe right to alter its products without notice. This also applies toproducts already on order provided that such alterations can bemade without subsequential changes being necessary in specifi-cations already agreed. All trademarks in this material are property of the respective
companies. Flomatic and the Flomatic logotype are trademarksof Flomatic Corporation. All rights reserved.
© Copyright 2011 by Flomatic #YCycle Rev. 7/11
High Quality Valves Built to Last...
THEMOST
COMPACTSYSTEM
Cycle Gard®IDomestic water well systems, irrigation and agricultural requiring constant pressure pump control.Max Pressure: 400 PSIMax Temp 180o FAdjustable Pressure Ranges: 15-75 PSI & 15-150 PSI
Flow 1-50 GPM depending on size. For usewith, domestic water well systems, irrigation,agriculture water systems, and commercialwater supply.
Cycle Gard®IVSpace saving control center unit with additional tappings.
Max Pressure: 400 PSIMax Temp 180o FAdjustable Pressure Ranges: 15-75 PSI & 15-150 PSI
Flow 1-30 GPM. For use with, domestic waterwell systems, irrigation, agriculture water systems,and commercial water supply systems.
Cycle Gard® IISystems requiring higher flow constant pressure pump control.
Max Pressure: 250 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-5200 GPM. depending on size.For use with domestic water well, municipal water systems, industrial watersystem, irrigation and agriculture.
BOOSTER-IT®
Water system pump control valve.
Max Pressure: 175 PSIMax Temp 180o F
This simple Booster-It® flow control valveincreases flow to reduce short cycling of the pump. Three 1/4” NPT tapped ports are provided for a pressure switch and gauge on the tank outlet side. One 1/4” NPT tapping is provided for a plug to drain the tank.
Cycle Gard®CNASystems requiring higher flow constant pressure pump control. 90 degree angledbody unit.
Max Pressure: 250 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-5200 GPM. depending on size. For use with domestic water well, municipalwater systems, industrial water system, irrigation and agriculture.
Cycle Gard® HYDROSTATTM
Space saving unit that fits in the well casing .
Max Pressure: 400 PSIMax Temp 180o FPressure Preset at 50 PSI
Flow 1-25 GPM. For use with, domestic water well systems,irrigation and agriculture water systems.
Cycle Gard® HY-FLOW 11⁄4”Reduces rapid pump cycling featuring fieldadjustable by-pass & maintains a pre set operating downstream pressure.
Max Pressure: 400 PSIMax Temp 180o FPressure Preset at 50 PSI
Flow 1-70 GPM. For use with, domestic water well systems,irrigation and agriculturewater systems.
COMPLETE PRODUCT OFFERINGCONSTANT PRESSURE PUMP CONTROL
Cycle Gard®CIIrrigation & agricultural systems requiring constant pressure pump control.
Max Shut off Head Pressure: 225 PSIMax Pressure Deferential 125 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-400 GPM. depending on size. For use with domestic water well, municipal water systems, industrial water system, irrigation and agriculture.
Maintains a Constant Pressure
Stops Pump from Cycling
Hydraulically Operated
Extends Pump Motor Life
Eliminates Effects of Water Hammer
Many Models Available for Various Applications
Ease of Installation
Field Adjustable
Downsize the Tank Size
Flomatic Corporation15 Pruyn’s Island DriveGlens Falls, NY 12801-4421Tel: 800-833-2040 Fax: 800-314-3155
Cycle Gard® Constant Pressure Pump Control Valves automatically regulatesdownstream pressure and provides a constant pressure until the demand in the system is no longer required. Depending on the valve Model an integral or external low flow by-pass allows the system pressure to slowly rise under low demand and fill the tank or reservoir until the pressure switch setting is reached shutting the pump off.
The Pressure switch setting should be set higher that the desired regulated system pressure. Once the system requires a supply the pressure tank will drain triggering the pressure switch to activate the pump and once again enabling the Cycle Gard® Valve to supply constant pressure. Cycle Gard® Constant Pressure Pump Control Valves maintain a constant pressure, prevents the pump from cycling, are hydraulically operated requiring no electricity, reducesthe effect of water hammer, extends pump motor life, and allows for reducedtank size. All valves have a three year warranty.
High Quality Valves Built to Last...
Cycle Gard®IDomestic water well systems, irrigation and agricultural requiring constant pressure pump control.Max Pressure: 400 PSIMax Temp 180o FAdjustable Pressure Ranges: 15-75 PSI & 15-150 PSI
Flow 1-50 GPM depending on size. For usewith, domestic water well systems, irrigation,agriculture water systems, and commercialwater supply.
Cycle Gard®IVSpace saving control center unit with additional tappings.
Max Pressure: 400 PSIMax Temp 180o FAdjustable Pressure Ranges: 15-75 PSI & 15-150 PSI
Flow 1-30 GPM. For use with, domestic waterwell systems, irrigation, agriculture water systems,and commercial water supply systems.
Cycle Gard® IISystems requiring higher flow constant pressure pump control.
Max Pressure: 250 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-5200 GPM. depending on size.For use with domestic water well, municipal water systems, industrial watersystem, irrigation and agriculture.
BOOSTER-IT®
Water system pump control valve.
Max Pressure: 175 PSIMax Temp 180o F
This simple Booster-It® flow control valveincreases flow to reduce short cycling of the pump. Three 1/4” NPT tapped ports are provided for a pressure switch and gauge on the tank outlet side. One 1/4” NPT tapping is provided for a plug to drain the tank.
Cycle Gard®CNASystems requiring higher flow constant pressure pump control. 90 degree angledbody unit.
Max Pressure: 250 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-5200 GPM. depending on size. For use with domestic water well, municipalwater systems, industrial water system, irrigation and agriculture.
Cycle Gard® HYDROSTATTM
Space saving unit that fits in the well casing .
Max Pressure: 400 PSIMax Temp 180o FPressure Preset at 50 PSI
Flow 1-25 GPM. For use with, domestic water well systems,irrigation and agriculture water systems.
Cycle Gard® HY-FLOW 11⁄4”Reduces rapid pump cycling featuring fieldadjustable by-pass & maintains a pre set operating downstream pressure.
Max Pressure: 400 PSIMax Temp 180o FPressure Preset at 50 PSI
Flow 1-70 GPM. For use with, domestic water well systems,irrigation and agriculturewater systems.
COMPLETE PRODUCT OFFERINGCONSTANT PRESSURE PUMP CONTROL
Cycle Gard®CIIrrigation & agricultural systems requiring constant pressure pump control.
Max Shut off Head Pressure: 225 PSIMax Pressure Deferential 125 PSIMax Temp 180o FAdjustable Pressure Ranges: 25-175 PSI
Flow 1-400 GPM. depending on size. For use with domestic water well, municipal water systems, industrial water system, irrigation and agriculture.
Maintains a Constant Pressure
Stops Pump from Cycling
Hydraulically Operated
Extends Pump Motor Life
Eliminates Effects of Water Hammer
Many Models Available for Various Applications
Ease of Installation
Field Adjustable
Downsize the Tank Size
Flomatic Corporation15 Pruyn’s Island DriveGlens Falls, NY 12801-4421Tel: 800-833-2040 Fax: 800-314-3155
Cycle Gard® Constant Pressure Pump Control Valves automatically regulatesdownstream pressure and provides a constant pressure until the demand in the system is no longer required. Depending on the valve Model an integral or external low flow by-pass allows the system pressure to slowly rise under low demand and fill the tank or reservoir until the pressure switch setting is reached shutting the pump off.
The Pressure switch setting should be set higher that the desired regulated system pressure. Once the system requires a supply the pressure tank will drain triggering the pressure switch to activate the pump and once again enabling the Cycle Gard® Valve to supply constant pressure. Cycle Gard® Constant Pressure Pump Control Valves maintain a constant pressure, prevents the pump from cycling, are hydraulically operated requiring no electricity, reducesthe effect of water hammer, extends pump motor life, and allows for reducedtank size. All valves have a three year warranty.
High Quality Valves Built to Last...
Flomatic Corp.15 Pruyn’s Island DriveGlens Falls, N.Y. 12801-4424800-833-2040518-761-9797 • Fax 518-761-9798www.flomatic.com • e-mail: [email protected]
Cycle Gard® I Cycle Gard® II Hydrostat®
Cycle Gard® IV Cycle Gard® CI Cycle Gard®CNA
HY-FLOWTM BOOSTER-IT®
DIRECT ACTING PUMP CONTROL VALVENPT ID x UNIONPressure: 15 - 75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1/2” C152099E 1/2” C152199E3/4” C152000E 3/4” C152100E1” C152001E 1” C152101E11/4” C152002E 11/4” C152102E11/2” C152003E 11/2” C152103E2” C152004E 2” C152104 E
NPT ID x NPT OD DUAL PURPOSE THREADSPressure: 15-75 Pressure: 15 - 150 PSI
SIZE PART # SIZE PART #1/2” C152099ET 1/2” C152199ET3/4” C152000ET 3/4” C152100ET1” C152001ET 1” C152101ET
DIRECT ACTING PUMP CONTROLVALVE REGULATOR VALVE WITH TAPPINGS
THREADED NPT ID x UNIONPressure: 15 - 75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1” CB152001E 1” CB152101E
NPT ID x NPT ODPressure: 15-75 PSI Pressure: 15 - 150 PSISIZE PART # SIZE PART #1” CB152001ET 1” CB152101ET
BOOSTER-IT TM WATER SYSTEM PUMP CONTROL VALVE*
SIZE PART #
3/4” C1541001” C15410111/4” C15410211/2” C1541032” C154104
*with (2) 1/4” tappings on tank side
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI 150#
SIZE PART # PART #11/4” CN1010B11/2” CN1010C CN1011C2” CN1010D CN1011D21/2” CN1010E CN1011E3” CN1010F CN1011F4” CN1011G6” CN1011J8” CN1011K10” CN1011L12” CN1011M
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI 150#
SIZE PART # PART #11/4” CNA1010B11/2” CNA1010C2” CNA1010D CNA1011D21/2” CNA1010E CNA1011E3” CNA1010F CNA1011F4” CNA1011G6” CNA1011J8” CNA1011K10” CNA1011L12” CNA1011M
HIGH FLOW DIRECT ACTING PUMP CONTROL REGULATOR VALVE
THREADED FEMALE x FEMALE NPTPressure: Max 400 PSI
SIZE PART # SPRING RANGE11/4” C152002EHF 15 - 75 PSI11/4” C152102EHF 15 - 150 PSI
COMPACT PUMP PRESSURE / REGULATOR
THREADED FEMALE I.D. x MALE O.D.Pressure: Max 400 PSI
SIZE PART #
1“ F x 11/4” M C3100E1“ F x 11/4” M C3100EB**with (2) 1/4” tappings
PUMP CONTROL VALVETHREADED FEMALE FLANGED ANSI
150# SIZE PART #
11/2” CIN1020C2” CIN1020D
GROOVED CONNECTIONSIZE PART #
2” CIN1020DG
SIZE PART #
3” CIN1021F4” CIN1021G6” CIN1021J8” CIN1021K
CYCLE GARD® HY-FLOWModel C152EHF
CYCLE GARD® I Model C152E
CYCLE GARD®IVModel CB152E
CYCLE GARD® II Model C152EHF
CYCLE GARD® CIModel CIN101
CYCLE GARD® CNA Model CNA 101N
BOOSTER-IT®
Model C154
CYCLE GARD® HYDROSTAT®
Model C3100
CONSTANT PRESSURE CONTROLW W W. F L O M A T I C . C O M
Flomatic can accept no responsibility for possible errors in cata-logues, brochures and other printed material. Flomatic reservesthe right to alter its products without notice. This also applies toproducts already on order provided that such alterations can bemade without subsequential changes being necessary in specifi-cations already agreed. All trademarks in this material are property of the respective
companies. Flomatic and the Flomatic logotype are trademarksof Flomatic Corporation. All rights reserved.
© Copyright 2011 by Flomatic #YCycle Rev. 7/11
High Quality Valves Built to Last...
THEMOST
COMPACTSYSTEM
