Consortium for Computational Physics and Chemistry (CCPC) · Consortium for Computational Physics...
Transcript of Consortium for Computational Physics and Chemistry (CCPC) · Consortium for Computational Physics...
1 | Bioenergy Technologies Office eere.energy.gov
Consortium for Computational Physics and Chemistry (CCPC)
U.S. Department of Energy (DOE)Bioenergy Technologies Office (BETO) 2017 Project Peer Review Thermochemical Conversion March 7th, 2017
Project Leads:Jim Parks – ORNLDavid Robichaud – NRELPeter Ciesielski – NRELRoger Rousseau – PNNLAsanga Padmaperuma – PNNLBill Rogers – NETLMadhava Syamlal – NETLRajeev Assary – ANLLarry Curtiss - ANL
WBS: 2.5.1.301/302/303/304/306
2 | Bioenergy Technologies Office
ChemCatBio StructureCore Catalysis Projects Enabling Projects
Fast Pyrolysis and Upgrading(PNNL, ORNL)
Catalytic Fast Pyrolysis(NREL, PNNL)
Recovering and Upgrading Biogenic Carbon in Aqueous Waste Streams
(PNNL, NREL)
Liquid Fuels via Upgrading of Indirect Liquefaction Intermediates
(NREL, PNNL)
Catalytic Upgrading of Biochemical Intermediates
(NREL, PNNL, ORNL, LANL)
Consortium for Computational Physics and Chemistry
(ORNL, NREL, PNNL, ANL, NETL)
Advanced Catalyst Synthesis and Characterization
(NREL, ANL, ORNL)
Catalyst Cost Model Development(NREL, PNNL)
Zeolites and Metal Oxide Catalysts
Supported Metal Catalysts
Cross-cutting Discussion Groups
• Core catalysis projects focused on specific applications
• Collaborative projects leveraging core capabilities across DOE laboratories
• Cross-fertilization through discussion groups
Consortium Integration
3 | Bioenergy Technologies Office
Goal StatementAccelerate progress on experimental BETO projects toward critical program verification goals and successful technoeconomic analysis (TEA) outcomes that result in economic sustainability of bioenergy by applying:
(1) process and reactor models that incorporate feedstock and catalyst properties, to guide reactor design and operation and inform and understand reactor scale up from lab, to pilot, to commercial scales; and
(2) catalyst models that provide active site energetics and entropics to guide the experimental design and discovery of next generation catalysts and improve durability and cost-effectiveness.
Them
e
Ensures that BETO lab and pilot scale results translate to commercial scales economically Relevance
Captures complexity of biomass structure and chemistry for practical simulation outcomes
Enables catalyst surface science tools to aid in catalyst discovery, selectivity, and durability
Scalability
Bio-Complexity
Catalysis Science
4 | Bioenergy Technologies Office
Quad Chart Overview
• Project start date: 10/1/2015• Project end date: 9/30/2018• Percent complete: 50%
• Ct-A. Feedstock Variability and Ct-F. Efficient High-Temp Deconstruction to Intermediates
• Feedstock dependent models coupled with reactor simulations to predict yield variations
• Ct-H. Efficient Catalytic Upgrading• Atomistic models of catalytic chemistry to
accelerate the design of new materials; reactor modeling to determine optimal residence times
• Ct-J. Process Integration• Scalable reactor/process models that can
be coupled to define integrated operations
Timeline
Budget
Barriers addressed & Actions
Partners
FY15 Costs
FY16 Costs
Total Planned Funding
(FY17-Project End Date)
DOE Funded $3.3M $3.2M $6.3M
• NREL (53%), ORNL (24%), ANL (10%), NETL (8%), PNNL (5%)
• ChemCatBio• Feedstock Conversion Interface
Consortium• Integration and Scale Up Project (NREL) • 9-member Industry Advisory Panel• 5 Universities (list in Additional Slides)
*FY17 operating budget reduced to $3.0M
5 | Bioenergy Technologies Office
Project Overview• The CCPC is a consortium of BETO’s modeling expertise representing a hub for the computational
needs for the biofuels program• The CCPC is a team with diverse applied computational expertise where ideas, approaches, and
findings can be discussed and advanced via cross-talk• With modeling collaborations beginning in 2013, the CCPC is now mature with best practices being
honed and shared across BETO
Objectives:(1) Provide predictive simulation tools to enable BETO experimental teams to
maximize yield and fuel chemistry based on reactor design, operational parameters, feedstock type, and feedstock particle size distributions during pilot scale verification
(2) Simulations of reactor scale up effects and predictive impact on linkage of BETO bench and pilot scale results to full plant TEA
(3) In conjunction with ChemCatBio, more rapid advancements in catalyst formulation and design that result in experimentally observed improvements (yield, selectivity, durability, lifetime, cost)
FY13 FY22FY16 Sept FY18FY15Collaboration Start Peer Review Review->”Go” Verification Verification
Note: more detailed timeline in additional slides
3-year Project Timeframe
6 | Bioenergy Technologies Office
Approach (Management): Technical tasks organized around conversion processes
FeedstockHandling &Processing
Fast Pyrolysis VaporPhase
Upgrading
LiquidPhase
Upgrading Chemicals and
Fuels(Jet, Diesel, Gasoline)
Vapor Phase
CatalysisLiquid Phase
Catalysis
Reactor Scale-Up
Reactor Scale-Up Reactor
Scale-UpAsh and
Chemistry Effects
Particle Size and
Complexity
Material Handling
Reactor Analysis and Scale-Up Task:ORNL(lead), NETL, NREL, PNNL
Feedstock Impact Analysis Task:
NREL(lead), ORNL
Vapor Phase Upgrading Task:NREL(lead), ANL
Liquid Phase Upgrading Task:
PNNL(lead)
Hydrothermal Liquefaction
Gasification
Hydrolysis
Project Management: ORNL
NETL added in FY17 to
strengthen reactor modeling
7 | Bioenergy Technologies Office
Approach: 8 joint/linked FY17 milestones* with experimental teams highlight collaborations
Feedstock-Conversion Interface Consortium
Integration and Scale-Up BETO Verifications
Feedstock Impact Analysis
Reactor Analysis & Scale-Up
Liquid Phase Upgrading
Vapor Phase Upgrading
CCPC
8 joint/linked milestones address 2015 reviewer comment “…tied directly to projects on experimental results so that the two can work synergistically”
Advanced Catalyst Synthesis and Characterization
(NREL, ANL, ORNL)
Catalytic Fast Pyrolysis(NREL, PNNL)
Liquid Fuels via Upgrading of Indirect Liquefaction Intermediates
(NREL, PNNL)
Fast Pyrolysis and Upgrading(PNNL, ORNL)
*see additional slides for full list of milestones
8 | Bioenergy Technologies Office
Project overview – Integrated approachEstablish an integrated and collaborative portfolio of catalytic and enabling
technologies
Catalytic Fast Pyrolysis
Fast Pyrolysis and Upgrading
Recovering and Upgrading Biogenic Carbon in Biomass-
Derived Aqueous Streams
Liquid Fuels via Upgrading of Indirect Liquefaction
Intermediates
Catalytic Upgrading of Biochemical Intermediates
CCB Catalysis Projects Enabling Technologies
Catalyst Development
(ACSC)
Cost Guidance (CCM)
Computational Modeling (CCPC)
Collaborative outcomesImproved
Performance for Key Metrics
Cost-guidedSynthesis
Targeted Cost Reduction
9 | Bioenergy Technologies Office
Approach: Exchange across technical community provides guidance, relevance, and direction
Quarterly Face-to-Face meetings (location rotates among labs)
Monthly/bi-weekly telecoms (with full team, task teams, and experimental teams)
Industry Advisory Panel: reviews detailed progress quarterly
CCPC Technical Webinar Series: Academic experts
Publications and Presentations: at peer review journals and core bioenergy conferences
CCPC Website: public outreach at cpcbiomass.org
Industry Advisory Panel [representing >100 years of combined experience]David Dayton (RTI), George Huff (MIT, retired BP), Jack Halow (Separation Design Group),
Mike Watson (Johnson Matthey), Randy Cortright (formerly Virent Energy Systems), Richard Quann (ExxonMobil), Steve Schmidt (WR Grace), Tom Flynn (Babcock & Wilcox), Rick Wessel
(Babcock & Wilcox)
Open-source Code: CCPC model code on GitHub
Communication in CCPCInputs Public Outputs
ChemCatBio: experimentalist requests
Techno-Economic Analysis (TEA)
10 | Bioenergy Technologies Office
Approach: Focus on physics and chemistry that gives impactful tools to accelerate bioenergy processes
Biomass Particle Models
Residence Time Distributions
Reaction Kinetic Rates
Coking and Fouling Rates
Surface Chemistry Energetics
CCPC Focused Outcomes
Notable Tech Transfer
Surface Phase Explorerspe.nrel.gov (public)
CSFMB©/CeSFaMBTM
CCPC assisted Prof. de Souza-Santos in including biomass pyrolysis chemistry into new
version of CSFMB© commercial software (Brazil)www.csfmb.com
Critical Success Factors:Our tools used by
community to accelerate experiments and improve
Techno-Economic Analyses
PythonTM - www.python.org
GitHub - github.com
GitLab - about.gitlab.com
Git - git-scm.com
MATLAB® - www.mathworks.com
COMSOL Multiphysics®www.comsol.com
C3M - mfix.netl.doe.gov/c3m
MFiX - mfix.netl.doe.gov/mfix
11 | Bioenergy Technologies Office
Technical Approach: Challenges and Success Factors
Process Modeling
ChallengeEnable vastly diverse biomass feedstock to be modeled efficiently across scales of processes to maintain yield and selectivity from bench to commercial scale
ChallengeDevelop tools to quicklydetermine catalyst structure and surface chemistry reactions to enable synthesis of improved catalysts
Critical Success FactorsPredictions and testable hypotheses that accelerateChemCatBio’s synthesis of new catalysts with improved lifetime, activity, & selectivity
Catalysis Modeling
Critical Success FactorsModels that capture feedstock complexity and accurately predict reactor performance at multiple scales
12 | Bioenergy Technologies Office
Technical Approach: Complex realism to effective simplicity
2” Fluidized Bed Reactor
DCR Fluidized Bed Reactor
TCPDU Entrained Flow Reactor
0.5 kg/hr
2 kg/hr
15 kg/hr
All Three Reactors at NREL
Complex, 3D particle model
Results fit to low-order model
Low order particle modelthat capture complex
behavior
Reactor-scalemodelComplex effects
of biomass particles captured
in low-order particle models
for use in reactor scale models
Resulting reactor models enable
scalable prediction of
pyrolysis yield
13 | Bioenergy Technologies Office
CCPC Publication: Ciesielski, et al. Biomass Particle Models with Realistic Morphology and Resolved Microstructure for Simulations of Intra-Particle Transport Phenomena. Energy & Fuel, 2015
Accomplishments: Reduced order particle models capture biomass complexity in practical form for reactor modelsObjective: Develop reduced order biomass particle models to facilitate integration with reactor-scale simulations. Accomplishments:• Performed sensitivity analysis using fully-resolved
3D models to determine which complexities are most impactful
• Developed fast, 1D model that replicates behavior of 3D models using effective particle dimensions and properties
Top: Heating transfer simulation for poplar particles of 2 different sizes.Bottom: visualization of order-reduction in biomass particle modeling
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
Relevance:The reduced order particle models enable reactor-scale simulations over 100x faster while still capturing effects from biomass complexity
0.5 mm poplar particle
2 mm poplar particle
Tem
pera
tiure
(˚C)
14 | Bioenergy Technologies Office
Accomplishments: Optimal residence time predicted based on feedstock-specific parameters
Objective: Predict optimal residence time (i.e., time of peak tar yield) as a function of feedstock-specific parameters
Accomplishments:• Coupled heat transfer, mass transfer, fluid dynamics, and chemical reaction for particle scale models of fast pyrolysis
• Simulations account for important process variables such as particle size, shape, biomass species, moisture content, and reactor temperature
• Provides estimates of time-resolved product evolution
Relevance: Simulations provide estimates of optimal operating conditions, including reactor temperature and residence time, for pyrolysis experiments.
Above: Simulation of product evolution during pyrolysis of a ~3 mmpine particle at 500 °C.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
CCPC Publication: Wiggins, Ciesielski, & Daw, Low-Order Modeling of Internal Heat Transfer in Biomass Particle Pyrolysis. Energy&Fuel 2016
15 | Bioenergy Technologies Office
Accomplishments: Low-order reactor model captures multiphase residence time distributions
Objective: Predict product yields (gas, tar, char) from fast pyrolysis of biomass particles in a bubbling fluidized bed reactor.Accomplishment: Constructed low-order reactor mixing models to estimate residence times of biomass particles and the resulting oil yield.
Relevance: Computationally efficient and scalable approach provides accurate residence time distribution for predicting pyrolysis yield.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
16 | Bioenergy Technologies Office
*data from NREL 2”FBR reactor
Major Accomplishments: Combined particle and reactor models to predict accurate yields for two different feedstock size distributions
Yield Predictions for 0.5 mm and 2.0 mm Particle Size Distribution (PSD) Ensembles
Accomplishments:• Combined particle and reactor simulations • Validated pyrolysis model for 2” fluidized bed reactor
against two different particle size distributions and moisture contents of pine with FCIC experimental team
Relevance: Coupled multiscale simulations predicted bio-oil yields within 2% of experimental error.• drive out-year experimental design and process
optimization in FCIC• inform scale up between 0.5 kg/hr bench and 15 kg/hr
pilot systems.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
INL sends feedstock characterization to NREL
NREL models feedstock; translates to ORNL
ORNL models reactor with low-order particle model
ORNL model results match NREL experimental results!
Cross-cutting NL-NL and modeling-experimental collaboration and workflow
Expe
rimen
t*
Expe
rimen
t*
Accurate yield prediction for two different feedstock size distributions
Yield (mass fraction)Re
acto
r Hei
ght
CCPC Publication: Ciesielski, Wiggins, & Daw in Fast Pyrolysis of Biomass, eds. Robert Brown & Kaige Wange. In press
17 | Bioenergy Technologies Office
Accomplishments: Catalyst packing geometry can be used to optimize flow path and minimize fouling
Objective: Reduce fouling of hydrotreating reactor Accomplishments: • Porosity and permeability in a tubular down-flow reactor have been shown to affect
multi-phase flow in wall region • Channeling from the high porosity of the bed at the wall creates hydrogen-rich and
hydrogen-starved zones gunking occurs in the latter
Relevance: Reactor engineering shows pathways to minimize maldistribution which can reduce hydrogen consumption and minimize fouling processes
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
18 | Bioenergy Technologies Office
Relevance: Process Modeling: Bio-Complexity & Scalability
yiel
d
t (sec)
Models capturing complexities of particle size, shape, speciation, and chemistry
Reactor models capturing
multiphase flows and
residence times
Relevance to BETO and Industry:The models developed in the CCPC provide a ‘window into the reactor’. This enables the BETO platform and industry to:• Troubleshoot issues with reactors as they arise, reducing system downtime• Conduct commissioning of new systems more efficiently• Facilitate scale-up of processes and new catalyst formulations from the bench to pilot scale• Methodology is being used to extend modeling success to in situ and ex situ CFP
19 | Bioenergy Technologies Office
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
• Pelletization alters microstructure and intra-particle transport behavior• We are developing particle models for pelletized feedstocks based on micro X-
ray computed tomography data (with Colorado School of Mines)• Particle models also advancing for blended feedstocks for verification
Images: B. Kappes (CSM), P. Ciesielski (NREL)
Future Work: Biomass particle models advancing for pelletized/crushed and blended feedstocks
Annual Milestone LINKED with Integration and Scale-Up project (WBS 2.4.1.301)
20 | Bioenergy Technologies Office
Future Work: Scalability - extend low-order pyrolysis model to TCPDU Entrained Flow Reactor
CSTR
PFR
PFR
CSTR
PFR
CSTR
PFR
PFR x 3
Larger size biomass particles have higher residence times due to reactor geometryNote: for visualization, particles shown at 50x diameter (relative to reactor scale)
Progress to-date: MFiX-DEM model (left) of Entrained Flow Reactor to determine residence time distributions for low-order model (below)
ParticleDiameter
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
FeedstockAnnual Milestone LINKED with Integration and Scale-Up project (WBS 2.4.1.301)
PFR
21 | Bioenergy Technologies Office
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
Future Work: Developing scalable upgrading reactor models to support verification success
Computational Domain in Red
2” Fluidized Bed Reactor
Upgrader*
Davison Circulating Riser
(DCR) Reactor*
TCPDU R-Cubed Upgrader*
0.5 kg/hr
2 kg/hr
15 kg/hr
*All (3) Reactors at NREL
WR Grace
PSRI (redesign)
Relevant to new BETO catalysts
Relevant to Industry
Relevant to Scaled-Up Verification
Stretch Annual Milestone LINKED with Integration and Scale-Up (WBS 2.4.1.301)
22 | Bioenergy Technologies Office
Progress To-Date: Physics of catalyst flow in R-Cubed riser captured via MFiX model
Objective: Accelerate commissioning of R-cubed riser reactor.Accomplishments:• Constructed initial R-cubed model in MFiX based
on collaboration with Integration and Scale Up• Currently using model to investigate impact of
process conditions on residence time distributions of pyrolysis gases and catalyst solids
Relevance: Simulations provide expectations on reactor performance prior to commissioning. Will enable faster commissioning and optimization.
Predicted residence time response for solids and gases
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
FeedstockStretch Annual Milestone LINKED with Integration and Scale-Up (WBS 2.4.1.301)
23 | Bioenergy Technologies Office
Technical Approach: Challenges and Success Factors
Process Modeling
ChallengeEnable vastly diverse biomass feedstock to be modeled efficiently across scales of processes to maintain yield and selectivity from bench to commercial scale
ChallengeDevelop tools to quicklydetermine catalyst structure and surface chemistry reactions to enable synthesis of improved catalysts
Critical Success FactorsPredictions and testable hypotheses that accelerateChemCatBio’s synthesis of new catalysts with improved lifetime, activity, & selectivity
Catalysis Modeling
Critical Success FactorsModels that capture feedstock complexity and accurately predict reactor performance at multiple scales
24 | Bioenergy Technologies Office
Technical Approach: Catalyst Models Cover Range of Materials
• Catalytic upgrading of pyrolysis products • Correlate H and CO absorption energies
with experimental observations to guide new catalyst discovery
• ACSC & IDL• Design structure function
relations to enhance HDOover metal catalysts
• Catalytic Upgrading of Sugars • Identify opportunities to avoid poisoning of
catalysts by Ni
• ChemCatBio (CFP) & ACSC• Comparing H and aromatic
absorption to answer experimental observation of coke formation under different reaction conditions
RuSn active phase identification
Understanding Mo2C coke from batch to continuous feedSupported metal catalyst design
Mixed metal phosphides characterization
Active phase for Cu-Beta hydrogenation
• ACSC & IDL• Enhance alkane activation and
increase yields of diesel/jet fuels from IDL
Optimize catalytic activity of Mo2C• ChemCatBio (CFP)• Reactivity of Ni* or /Ca* doped Mo2C
surfaces towards hydrogenation -‘Carbon-Carbon’ coupling balance in the vapor phase
Tailoring dopants in zeolites• CFP and Aqueous Reforming• Design catalysts with improved
activities and test these hypothesis
Structural design of zeolites• ChemCatBio• Determine impact of explicit
mesopores on mass transport in zeolites
Controlling solvophilicity• FP + upgrading• Reduce gunking in HT reactors
25 | Bioenergy Technologies Office
Technical Approach: Models for Catalysis Design
Atomistic simulations using static to dynamic models to support CCB:
– Understand catalyst activity and yield selectivity – Guide new catalyst syntheses (ACSC) – Optimize reactor conditions
26 | Bioenergy Technologies Office
Accomplishments: Designing more effective Mo2C catalysts
Schematic of simulated surface models of clean Mo2C(100) andNickel doped Mo2C catalysts for (a) binding energies of ‘O’ and (b)activation energy required to form OH species in the gas phase
Presence of Ni improves stability of Mo2C via decreasing catalytic deactivation
Objective: Provide guidelines to improvethe Mo2C catalysts for the upgrading ofbio-oil
Accomplishment:– Developed DFT models of Mo2C and
Ni/Mo2C catalytic sites– Investigated thermodynamics and
kinetics of sorption and desorptionof intermediates (O, OH, H2O) onvarious sites•crucial step in the deactivation of
catalysts
Relevance: Screening a wider parameter space of dopants to improvecatalysts by promoting desired reactions (deoxygenation, C-C coupling) willreduce catalyst discovery time and cost.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
27 | Bioenergy Technologies Office
Accomplishments: Identified active site and mechanism for C4 product upgrading with beta zeolite
Objective: With IDL and ACSC identify the active sitestructure responsible for low-temperature alkaneactivation in Cu-Beta.
Accomplishment:• Using DFT, identified the location, oxidation state,
and reactivity of isobutane dehydrogenation overCu-Beta
• In isolated Al-acid sites, copper is located in thewall of the straight channels of Beta zeolite in the+1 oxidation state – consistent with experimentalresults.
• Model predicts if framework aluminums arelocated in pairs, Cu(II) would be the preferredactive site with all barriers below the exit channel(ideal situation).
Relevance: Consistency between modeling and experiment has set the groundwork forcomputationally guided catalyst design. Recent work1 suggests that Al-pairing can be tuned over a widerange and opens this up as a potential new knob in the synthesis toolbox going forward.
Comparison of Cu(I) – 1 Al, and Cu(II) – 2 Al sites for dehydrogenation of isobutane in Cu-Beta
1Pashkova, J. Chemistry - A European Journal 2016, 3937.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
28 | Bioenergy Technologies Office
Accomplishments: Developed a tool for identifying catalytic surfaces under reaction conditions
Objective: Develop a quick-turnaround tool that canshow the thermodynamic state of a catalyst surfaceunder experimental reaction conditions.
Accomplishment:• Developed a web-based tool (Surface Phase Explorer,*
www.spe.nrel.gov) that can provide phase diagramsand absorption profiles under reaction conditions
• Focus on thermochemistry reduces computationalcosts, resulting in quick turnaround for experimentalteams (weeks, not months).
• SPE is being used (or has been used) on 6 differentprojects to date – both biochem and thermochemapplications.
Relevance: Reduced computational costs and fast turnaround allows the CCPC to impactmultiple catalyst design projects without worry of resource dilution. This capability bringscomputational modeling one step closer to being a standard tool in the catalyst designerstoolbox akin to NH3 TPD or X-ray characterization techniques.
Hydrogen coverage on Rh2P. Boxes highlight experimentally relevant regimes.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
T / K
log
(PH 2
/ ba
r)CCPC Publication: Ferguson et al., J. Phys. Chem. C, Vol. 120, 2016, pp. 26249-26258
29 | Bioenergy Technologies Office
Accomplishments: Providing in-silico diffusivity measurements for porous materialsObjective: Develop a rapid use model of zeolite mass transport for use by experimental partners
Accomplishment:• Developed an effective method for
computationally measuring diffusivity in micro and mesopores of zeolites
• Method has been used to determine diffusivity of multiple pyrolysis-relevant species
– Cannot be experimentally determined• Constructed catalyst particle models (similar to
biomass particle models) that can be used for screening of conditions and inclusion of coking/pore blocking
Relevance: Zeolites are ubiquitous in catalysis, yet mass transport in these systems is poorlyexplored. The combination of the modeling scales will provide an efficient means of investigatingmass transport, including guiding synthesis to include mesopores to maximize access to catalyticsites and reduce mass loss to coking.
Frame depicting the transport of xylene through a porein HZSM-5.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
CCPC Publication: Bu et al., J. Phys. Chem. C, DOI 10.1021/acs.jpcc/6b10871
30 | Bioenergy Technologies Office
Accomplishments: Control of catalyst solvophilicitycan improve conversion
lipophilic hydrophilic
CCPC Publication: Cantu et al., Catal. Today, 2016, http://dx.doi.org/10.1016/j.cattod.2016.08.025
Objective: Optimize catalyst conversion by controlling solvophilicity of catalyst surface
Accomplishment:• Simulated the kinetics and thermodynamics of
catalysts in multicomponent solvents with sufficient detail to capture conversion dependence on
• Temperature and composition of fluid phase• Composition of the support (hydro or lipophilic)• Size of metal particles
Relevance: Project has motivated and guideda cross-laboratory effort to synthesize(ACSC/NREL) new catalysts with controlledsolvophilicity which will be tested inhydrotreating reactors (CCB/PNNL) to gaugeimpact on fouling
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
31 | Bioenergy Technologies Office
Relevance: Catalyst modeling accelerates discovery
Modeling accelerates catalyst discovery for lower cost, more durable catalysts
Collaborative projects with ChemCatBio result in:Understanding of catalyst active sites (structure-function relations) and deactivation/fouling mechanisms
Tool development that has led to faster turnaround and higher impact on experimental projects
Guiding catalyst discovery through testable hypotheses
Process optimization based on computationally derived kinetics and mass transport that can link catalyst design to reactor models
32 | Bioenergy Technologies Office
Future Work: Enhancement of zeolites with Lewis metals to tailor reactivity
• Investigate influence of extra-framework Lewis metals on catalyst reactivity on both Brønsted and Lewis reactivity
• Develop database of model reactions to increase responsiveness to new experimental requests
Possible interactions between Lewis and Brønsted reactive centers.
Ga – enhanced reactivity forsugar decarbonylation.
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
FeedstockQuarterly Milestone Linked to FY18
ChemCatBio Milestones
33 | Bioenergy Technologies Office
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
Future Work: Catalysis modeling of complex liquid phase upgrading
Quarterly Milestone supporting Liquid Phase Upgrading experiments
• Construction of ab-initio microkinetic models for LPU including
• Particle size and support effects• Temperature effects • Species concentration
• Positions us for reactive CFD on bench and demo scale with higher fidelity than can be achieved with macrokinetics
• Direct comparison of theory predictions with experiment, 2nd generation model for enhanced performance and refined hypotheses
• The data can be used to avoid Edisonian serial research
34 | Bioenergy Technologies Office
Future work: Multiscale modeling of zeolite transport and deactivation to enhance access to active sites
Liquid Phase Upgrading
Vapor Phase UpgradingPyrolysisBiomass
Feedstock
Quarterly Milestone LINKED to Milestone on Advanced Catalyst Synthesis and
Characterization
35 | Bioenergy Technologies Office
Summary: Models span scale and complexity to accelerate cost-effective biomass-to-fuel processes
Approach: key inputs from Industry Advisor Panel and technical community plus close-coupling to experimentalists enables success
Relevance: accelerating deployment of biomass conversion technologies through process and catalysis modeling
• 30 publications and 29 presentations (since last Peer Review)*• Tech transfer via web tools and key parameter input to modeling codes
FeedstockHandling &Processing
Fast Pyrolysis VaporPhase
Catalysis
LiquidPhase
Upgrading
Particle models ensure diverse feedstock blends can efficiently be utilized
Critical residence times & kinetics enable scalability of reactor designs
Surface chemistry models accelerate design of efficient & selective catalysts
Reactor & reaction designs enable durable catalysis & minimal fouling
Chemicals and
Fuels(Jet, Diesel, Gasoline)
*Publication/presentation lists in additional slides
36 | Bioenergy Technologies Office
Acknowledgements
A multi-scale problem… A multi-lab solution
Jim ParksGavin WigginsStuart DawEmilio RamirezJessica TorresSreekanth PannalaCharles Finney
David RobichaudPeter CiesielskiSeonah KimLintao Bu Tom FoustVassili VorotnikovCarrie FarberowMark NimlosBrandon Knott
Roger RousseauBob WeberVanda GlezakouDavid CantuAsanga Padmaperuma
Larry CurtissRajeev AssaryLei ChengCong LiuDale Pahls
Bill RogersMadhava SyamlalTingwen LiDirk VanEssendelftBalaji Gopalan
Industry Advisory PanelDavid Dayton (RTI), George Huff (MIT, retired BP), Jack Halow (Separation Design Group), Mike Watson (Johnson Matthey), Randy Cortright (formerly Virent Energy Systems), Richard Quann(ExxonMobil), Steve Schmidt (WR Grace), Tom Flynn (Babcock & Wilcox), Rick Wessel (Babcock & Wilcox)
Special thanks to: Jeremy Leong, Cynthia Tyler, Prasad Gupte, and Kevin Craig (DOE BETO)
37 | Bioenergy Technologies Office
Additional Slides
38 | Bioenergy Technologies Office
Contents of Additional Slides
• Responses to 2015 Reviewers’ Comment• Project Timeline: CCPC History and Path to Success• Go/No-Go Review [August 2016] • Publications (since 2015 Peer Review) • Presentations (since 2015 Peer Review) • Commercialization & Technology Transfer• Milestones• List of Collaborating BETO Projects• List of Collaborators and Partners• Industry Advisory Panel Expertise Matrix
39 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (1/6)
Note: The 2015 Peer Review Report is publicly available at https://energy.gov/eere/bioenergy/2015-project-peer-review(the CCPC project is on pages 352-353)
• Overall, project scored well during 2015 Peer Review
40 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (2/6)
Generally Positive Comments (from 2015 Peer Review):• “Clearly, a well-planned and coordinated effort that will help establish technical
fundamentals, which can be leveraged by others.”• “The consortium provides a very useful way to focus the computational capabilities
of the laboratories on biomass problems.”• “The inclusion of an external advisory committee with significant industry
representation is a very useful way to keep this group focused.”• “Excellent program that brings modeling/computing technical expertise to this field
to identify critical science, engineering, and economic critical issues and directions. Very critical to have modeling aid in the scale-up of a new process technology. Brings together a larger organization and communication across the laboratories.”
CCPC Response/Actions:• Keep our collaborative approach and coordination• Keep utilizing the valuable external industry advisory committee
41 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (3/6)
Comments on Scope (from 2015 Peer Review):• “It seems scope of the project is way too large; might be better to concentrate on
two or three areas.”• “The consortium should determine sooner rather than later which approaches have
the most promise and focus on them.”• Regarding “broad-scoped approach”…”It [the project] now needs to work toward a
focused outcome, otherwise its value to subsequent projects is diluted.”CCPC Response/Action:• The project has continued to be broad in scope, and we agree that poses a
challenge with regard to maintaining focus on a concentrated set of deliverables. However, funding resources have been able to support our broad scope, and active program management by DOE has enabled the most promising results to be moved forward. Adjustments have been made to resource distribution (see Go/No-Go slides) in this regard. Also, the Industry Advisory Panel has been quite helpful in maintaining focus on the critical outcomes from the project tasks.
Note: Response/Action continued on next slide
42 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (4/6)
Comments on Scope (from 2015 Peer Review):CCPC Response/Action (continued from previous slide):• For process modeling tasks, we focused a significant portion of our efforts in the
last two years pyrolysis step (i.e. significant reduction in VPU reactor modeling) resulting in a win for modeling pine pyrolysis. Going forward we are rebalancing resources to again make VPU a priority and are leveraging lessons learned from the pyrolysis modeling effort.
• For the catalyst design tasks, we have been setting up those tasks to become a standard tool (similar to DRIFTS or TPD) that experimental teams can use for their catalyst design work. As such, many of our catalyst design projects are short, focused efforts to answer well defined questions and our aim is fast turnaround and impact (months). We only maintain a few (1-2) long term projects on catalyst design that extend past a single fiscal year.
43 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (5/6)
Comment on Experimental Ties (from 2015 Peer Review):• “Modeling work also needs to be tied directly to projects on experimental results so
that the two can work synergistically together.”CCPC Response/Actions:• Excellent comment. We have increased our engagement with experimental
projects, and each CCPC task is now collaborating closely with multiple projects. In addition, “joint” and “linked” milestones between CCPC and experimental projects further combine efforts between modeling and experimental activities in BETO.
44 | Bioenergy Technologies Office
Responses to 2015 Reviewers’ Comments (6/6)
Comment on Catalytic Pyrolysis (from 2015 Peer Review):• “One of the issues facing catalytic pyrolysis is determining which reactions are
catalytic and which are not. Will the modeling work address this?”CCPC Response/Actions:• Yes. While most of our activities are focused on separate pyrolysis and catalytic
upgrading processes, defining which pyrolysis reactions are catalytic is part of our approach. Furthermore, the catalytic effects of ash can affect pyrolysis yields and needs further study/definition (literature sparse related to ash effects); our project is addressing this issue which is critical for enabling effective utilization of herbaceous feedstocks.
45 | Bioenergy Technologies Office
Project Timeline: CCPC History and Path to Success
FY13 FY22FY16 Sept FY18
Project StartCCPC 3-year project started building off of initial collaboration
2015 Peer Review
• Demonstrated 3D biomass particle models for heat transfer
• Validated hydrodynamics of pyrolysis reactor
• Constructed preliminary model of DCR riser VPU
Peer Review Feedback
Focused efforts on pyrolysis in response to reviewer ‘dilution’ comment
FY17
Aug. 2016 (mid-cycle Go-NoG review passed “Go”)• Validated 1D particle models that capture 3D
heat transport effects• Combined 1D particle, kinetic, and reactor
models to predict moisture and particle size distribution effects on bio-oil yield.
• Kinetic models are major source of uncertainty
FY15
• Brought in NETL to work on VPU reactors• Follow success of pyrolysis approach to VPU
(combine particle, kinetic, and reactor modeling with validation against multiple systems at NREL).
End of 3-year project cycle• Demonstrate pyrolysis predictions across
multiple reactors and feedstocks• Validate VPU models• Address ‘kinetics’ risk
Goal for 2022
• Al a carte modeling tools that are publicly available to predict performance of pyrolysis, ex situ and in situ CFP
• Address kinetics issue for CFP• Link to LPU/Hydrotreating for
unified modeling toolset• Explore advanced issues with
modeling (aerosols, reactor coking/plugging, etc) as motivated by IAB
Collaborations BeganInitiated multi-NL collaboration on modeling
46 | Bioenergy Technologies Office
Go/No-Go Review [August 2016] (1/3)
On August 2, 2016, a Go/No-Go review of the CCPC was conducted.
The Criteria for the Go/No-Go review were:1) Using particle scale modeling and reactor simulations, demonstrate ability to predict pyrolysis oil yields from a fast pyrolysis reactor; 2) Show two examples (one VPU, one LPU) in which modeling has been used to inform an experimental BETO project.
The results from the Go/No-Go review were:“Conditional Go”; rescope (Criterion 2B) and redistribution of funds required for FY17.
47 | Bioenergy Technologies Office
Go/No-Go Review [August 2016] (2/3)
Specific directions from the Go/No-Go review included:Moving forward, criterion 1 and 2A should continue, and also consider expansion of scope in lieu of large LPU modeling efforts; significant redistributions of funding within CPC and rescope must be considered prior to the start of FY17’s AOP, as this is necessary to support more value-add and relevant tasks. LPU modeling should be decreased to CPC’s “minimum planning level” until experimentation can validate preliminary models, such that the feedback “cyclic-interconnected development continuum” loop closure can be demonstrated in a useful, transformative manner.
CCPC Actions in Response to Go/No-Go Review Feedback:• The CCPC redistributed resources across the tasks and made significant funding
additions to the Feedstock Impact Analysis task. Modest funding additions were also made for the Reactor Analysis and Scale-Up and Vapor Phase Upgrading (VPU) tasks.
• The Liquid Phase Upgrading (LPU) task was scaled back significantly. Recommendations from the LPU task were made to experimental teams, and the project is awaiting results from those experiments before next steps.
Graphs summarizing the resource redistribution are shown on the next slide
48 | Bioenergy Technologies Office
Go/No-Go Review [August 2016] (3/3)
CCPC Actions in Response to Go/No-Go Review Feedback:• Revised funding resource allocation for FY17 based on feedback
4.5%5.6%
25.6%
41.9%
22.4%
Task 1 (Coordination)
Task 2 (Feedstock andParticle)Task 3 (ReactorModeling and Scale Up)Task 4 (Vapor PhaseUpgrading)Task 5 (Liquid PhaseUpgrading)Task 6 (IDL)
4.5%
11.9%
29.7%43.4%
6.0%4.5%
Original FY17 Task Resource
Allocation
Revised FY17 Task Resource
Allocation
49 | Bioenergy Technologies Office
Publications (since 2015 Peer Review) (1/3)
1. Clark, J. M.; Nimlos, M. R.; Robichaud, D. J, "Biomolecular Decomposition Pathways for Carboxylic Acids or Relevance to Biofuels", published in Journal of Physical Chemistry A 2015, 119, 501. DOI: 10.1021/jp509285n
2. Ciesielski, P. N.; Crowley, M. F.; Nimlos, M. R.; Sanders, A. W.; Wiggins, G. M.; Robichaud, D.; Donohoe, B. S.; Foust, T. D, "Biomass Particle Models with Realistic and Resolved Microstructure for Simulations of Intrapartcile Transport Phenomena", 2015, 29, 242-254, Published in Energy and Fuels. DOI: 10.1021/ef502204v.
3. Ferguson, G. A.; Cheng, L.; Bu, L.; Kim, S.; Robichaud, D. J.; Nimlos, M. R.; Curtiss, L. A.; Beckham, G. T., "Carbocation Stability in H-ZSM5 at High Temperature", Published in Journal of Physical Chemistry A 2015, 119, 11397 -11405. DOI: 10.1021/acs.jpca.5b07025.
4. Kim, S.; Robichaud, D. J.; Beckham, G. T.; Paton, R. S.; Nimlos, M. R., "Ethanol Dehydration in HZSM-5 Studied by Density Functional Theory: Evidence for a Concerted Process", published in Journal of Physical Chemistry A 2015, 119, 3604 - 3614. DOI: 10.1021/jp513024z.
5. Liu, C.; Evans, T. J.; Cheng, L.; Nimlos, M. R.; Mukarakate, C.; Robichaud, D. J.; Assary, R. S.; Curtiss, L. A., "Catalytic Upgrading of Biomass-Derived Compounds via C-C Coupling Reactions: Computational and Experimental Studies of Acetaldehyde and Furan Reactions in HZSM-5", published in Journal of Physical Chemistry C 2015, 119, 24025 - 24035. DOI: 10.1021/acs.jpcc.5b08141.
6. Liu Yang, George Tsilomelekis, Stavros Caratzoulas, and Dionisios G. Vlachos, “Mechanism of Brønsted acid Catalyzed Glucose Dehydrogenation”, 2015, 8, 1334-1341, published in ChemSusChem dx.DOI.org: 10.1002/cssc.201403264.
7. Robert Weber, Mariefel V. Olarte, Huamin Wang, “Modeling the Kinetics of Deactivation of Catalysts during the Upgrading of Bio-Oil”, published in Energy&Fuels 2015, 29, 273-277. dx.doi.org/10.1021/ef502483t.
8. Buckingham, G. T.; Porterfield, J. P.; Kostko, O.; Troy, T. P.; Ahmed, M.; Robichaud, D. J.; Nimlos, M. R.; Daily, J. W.; Ellison, G. B., "The thermal decomposition of the benzyl radical in a heated micro-reactor. II. Pyrolysis of the tropyl radical", published in Journal of Chemical Physics 2016, 145. DOI: http://dx.doi.org/10.1063/1.4954895.
9. Clark, J. M.; Pilath, H. M.; Mittal, A.; Michener, W. E.; Robichaud, D. J.; Johnson, D. K., "Direct Production of Propene from the Thermolysis of Poly(β-hydroxybutyrate) (PHB). An Experimental and DFT Investigation", published in The Journal of Physical Chemistry A 2016, 120, 332 - 345. DOI: 10.1021/acs.jpca.5b09246.
10. Stuart Daw, Gavin Wiggins, Qingang Xiong, and Emilio Ramirez. "Development of a Low-Order Computational Model for Biomass Fast Pyrolysis: Accounting for Particle Residence Time." ORNL/TM-2016/69 (2016).
50 | Bioenergy Technologies Office
Publications (since 2015 Peer Review) (2/3)
11. David C. Cantu, Yang-Gang Wang, Yeohoon Yoon, Vassiliki-Alexandra Glezakou, Roger Rousseau, Robert S. Weber, "Heterogeneous catalysis in complex, condensed reaction media", Published in Catalysis Today, 2016, http://dx.doi.org/10.1016/j.cattod.2016.08.025.
12. Ferguson, G. A.; Vorotnikov, V.; Wunder, N.; Clark, J.; Gruchalla, K.; Bartholomew, T.; Robichaud, D. J.; Beckham, G. T., "AbInitio Surface Phase Diagrams for Coadsorption of Aromatics and Hydrogen on the Pt(111) Surface", published in J. Phys. Chem. C 2016, 120, 26249-26258. DOI: 10.1021/acs.jpcc.6b07057.
13. Gavin M. Wiggins, Peter N. Ciesielski, and C. Stuart Daw. "Low-Order Modeling of Internal Heat Transfer in Biomass Particle Pyrolysis." published in Energy & Fuels, 2016, 30, 4960-4969. DOI: 10.1021/acs.energyfuels.6b00554.
14. Griffin, MB; Ferguson GA; Ruddy, DA; Biddy, MJ; Beckham, GT; Schaidle, JA, “Role of the Support and Reaction Conditions on the Vapor-Phase Deoxygenation of m-Cresol over Pt/C and Pt/TiO2 Catalysts,” published in ACS Catalysis 2016, 6, 2715-2727. doi:10.1021/acscatal.5b02868.
15. Kim, S.; Evans, T. J.; Mukarakate, C.; Bu, L.; Beckham, G. T.; Nimlos, M. R.; Paton, R. S.; Robichaud, D., "Furan Production from Glycoaldehyde over HZSM-5", Published in ACS Sustainable Chemistry and Engineering 2016, 4, 2615 - 2623. DOI: 10.1021/acssuschemeng.6b00101.
16. Kumbhani, S. R.; Cline, T. S.; Killian, M. C.; Clark, J. M.; Keeton, W. J.; Hansen, L. D.; Shirts, R. B.; Robichaud, D. J.; Hansen, J. C., "Erratum to “Water Vapor Enhancement of Rates of Peroxy Radical Reactions”, Published in International Journal of Chemical Kinetics 2016, 47, 395-409. DOI: 10.1002/kin.21002.
17. "Kumbhani, S. R.; Cline, T. S.; Killian, M. C.; Clark, J.; Keeton, W.; Hansen, L. D.; Shirts, R. B.; Robichaud, D. J.; Hansen, J. C., ""Response to the Commenton Paper “Water vapor Enhancement of Rates of Peroxy Radical Reactions”, published in International Journal of Chemical Kinetics 2016, 48, 395. DOI 10.1002/kin.21001."
18. Schaidle, J. A.; Blackburn, J.; Farberow, C. A.; Nash, C.; Steirer, K. X.; Clark, J.; Robichaud, D. J.; Ruddy, D. A., "Experimental and Computational Investigation of Acetic Acid Deoxygenation over Oxophilic Molybdenum Carbide: Surface Chemistry and Active Site Identity", Published in ACS Catalysis 2016, 6, 1181 - 1197. DOI: 10.1021/acscatal.5b01930.
19. Qingang Xiong, Jingchao Zhang, Fei Xu, Gavin Wiggins, and C. Stuart Daw. "Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds." Journal of Analytical and Applied Pyrolysis, 2016, 117, 176-181. http://dx.doi.org/10.1016/j.jaap.2015.11.015.
51 | Bioenergy Technologies Office
Publications (since 2015 Peer Review) (3/3)
20. Q .Xiong, F. Xu, E. Ramirez, S. Pannala, C.S. Daw, "Modeling the impact of bubbling bed hydrodynamics on tar yield and its fluctuations during biomass fast pyrolysis", published in Fuel, 2016, 164, 11-17. http://dx.doi.org/10.1016/j.fuel.2015.09.074
21. Robinson, A; Ferguson, GA; Gallagher, JR; Cheah, S; Beckham, GT; Schaidle, JA; Hensley, JE, Medlin, JW, “Enhanced Hydrodeoxygenation of m-Cresol over Bimetallic Pt–Mo Catalysts through an Oxophilic Metal-Induced Tautomerization Pathway,” published in ACS Catalysis 2016, 6, 4356-4368. doi: 10.1021/acscatal.6b01131.
22. Xu, M.; Mukarakate, C.; Robichaud, D. J.; Nimlos, M. R.; Richards, R. M.; Trewyn, B. G., "Elucidating Zeolite Deactivation Mechanisms During Biomass Catalytic Fast Pyrolysis from Model Reactions and Zeolite Syntheses", Published in Topics in Catalysis 2016, 59, 73-85. DOI: 10.1007/s11244-015-0507-5.
23. Drouin, B. J.; Benner, D. C.; Brown, L. R.; Cich, M. J.; Crawford, T. J.; Devi, V. M.; Guillaume, A.; Hodges, J. T.; Mlawer, E. J.; Robichaud, D. J.; Oyafuso, F.; Payne, V. H.; Sung, K.; Wishnow, E. H.; Yu, S., "Multispectrum analysis of the oxygen A-band", published in Journal of Quantitative Spectroscopy and Radiative Transfer 2017, 186, 118-138. http://dx.doi.org/10.1016/j.jqsrt.2016.03.037.
24. E. Ramirez, C.E.A. Finney, S. Pannala, C.S. Daw, J. Halow, Q. Xiong, "Computational study of the bubbling-to-slugging transition in a laboratory-scale fluidized bed", published in Chem. Eng. J. (Amsterdam, Neth.), 2017, 308, 544-556. http://dx.doi.org/10.1016/j.cej.2016.08.113
25. Foust, T.; Ziegler, J.; Pannala, S.; Ciesielski, P.; Nimlos, M.; Robichaud, D., "Predictive Model for Particle Residence Time Distributions in Riser Reactors, Part 1.: Model Development and Validation", published in ACS Sustainable Chemistry & Engineering 2017. doi: 10.1021/acssuschemeng.6b02384.
26. Lintao Bu, Mark R. Nimlos, David J. Robichaud, Seonah Kim, "Diffusion of biomass pyrolysis products in H-ZSM-5 by molecular dynamics simulations", published in J. Phys. Chem. C, 2017, 121, 500-510. DOI: 10.1021/acs.jpcc.6b10871.
27. Mingxia Shou, Lei Cheng, Bin Lu, Larry A. Curtiss, R. S. Assary, “Role of Ga sites on furan decarbonylation over Ga/ZSM-5 – A first-principle investigation, submitted to ACS Sustainable Chemistry and Engineering Jan 2017.
28. Pecha, M. B.; Garcia-Perez, M.; Foust, T. D.; Ciesielski, P. N., "Estimation of Heat Transfer Coefficients for Biomass Particles by Direct Numerical Simulation Using Microstructured Particle Models in the Laminar Regime", published in ACS Sustainable Chemistry & Engineering 2017, 5, 1046-1053. DOI: 10.1021/acssuschemeng.6b02341.
29. Larissa Kunz, Ryan McDonough, Lintao Bu, Robin Cywar , Matthew Y. Yung, Gina Chupk, Cong Liu, Ryan Patalano, Kristiina Iisa, Mark R. Nimlos, Rajeev S. Assary, Larry A. Curtiss, Seonah Kim , David J. Robichaud, “Kinetic Determination of Alcohol Dehydration to Olefins over Zeolites”, 2017 submitted to Journal of Physical Chemistry
30. Farberow, C. A.; Cheah, S.; Kim, S.; Miller, J. T.; Gallagher, J. R.; Hensley, J. E.; Schaidle, J. A.; Ruddy, D. Exploring low-temperature dehydrogenation at ionic Cu sites in beta zeolite to enable alkane recycle in dimethyl ether homologation. 2017 ACS Catalysis(submitted)
52 | Bioenergy Technologies Office
Presentations (since 2015 Peer Review) (1/3)
1. Robert Weber, “Modeling the Kinetics of Deactivation of Catalysts during the Upgrading of Bio-Oil” presented at the 4th International Workshop on Bioenergy and Biofuels.
2. Mark Nimlos and Robert Weber, “Strike a happy medium: Identifying appropriate reaction conditions for upgrading bio-oil”, 249th ACS National Meeting, Denver, CO, COMP division.
3. Yoon Y, RJ Rousseau, RS Weber, D Mei, and JA Lercher, “First-principles Study of Phenol Hydrogenation on Pt and Ni Catalysts in Aqueous Phase”, 249th ACS National Meeting, Denver, CO, COMP division.
4. Donghai Mei, Yeohoon Yoon, Roger Rousseau, Robert Weber, and Johannes Lercher. "Aqueous phase phenol hydrogenation over metal catalysts," Abstract submitted to College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, China, 2015.
5. Yeohoon Yoon, Roger Rousseau, Robert Weber, Donghai Mei, and Johannes Lercher, "Effects of Aqueous Phase Environment on Phenol Hydrogenation over Pt and Ni Catalysts," NAM24, Pittsburgh, PA, June 2015.
6. Robert Weber and Roger Rousseau, “Reactions in Complex Media”, 250th ACS National Meeting, Boston, August 20157. Robert Weber, “Reactions in Complex Media", Keynote Lecture to 18th Brazilian Congress on Catalysis. Porto Seguro, Brazil,
September, 20158. Yang-Gang Wang, David Cantu, Vanda Glezakou, Roger Rousseau, “Classical, molecular-dynamic simulations on
water/phenol speciation at the surface-liquid interface”, 251st ACS National Meeting, San Diego, CA, 12-16 March 2016. COMP 58.
9. David Cantu, Yang Gang Wang, Yeohoon Yoon, Asanga Padmaperuma, Michael Lilga, Vanda Glezakou, Roger Rousseau, “Computational modeling of electrochemical bio-oil upgrading”, 251st ACS National Meeting, San Diego, CA, 12-16 March 2016. COMP 138.
10. David C. Cantu, Yang-Gang Wang, Yeohoon Yoon, Vassiliki-Alexandra Glezakou, Roger Rousseau, Robert S. Weber, “Speciation at Liquid-Solid Interfaces in the Processing of Renewable Fuels” 251st ACS National Meeting, San Diego, CA, 12-16 March 2016. ENFL 373.
11. Cantu D, Y Wang, Y Yoon, VA Glezakou, RJ Rousseau, and RS Weber. "Modifying liquid-solid interfaces for the processing of renewable fuels." Presented by Robert S Weber at 252nd ACS National Meeting, PHILADELPHIA, Pennsylvania, on August 22, 2016.
53 | Bioenergy Technologies Office
Presentations (since 2015 Peer Review) (2/3)
12. G. Wiggins, C. S. Daw, P. Ciesielski. “Modeling the Impact of Biomass Particle Size Distribution and Shape on Heating Behavior During Fast Pyrolysis”, Symposium on Thermal and Catalytic Sciences for Biofuels and Biobased Products, Chapel Hill, NC, November 2, 2016.
13. E. Ramirez, C. S. Daw, C. E. A. Finney, S. Pannala, J. Parks, “Computational study on biomass fast pyrolysis oil yield: effects of the bubbling-to-slugging transition in a laboratory-scale fluidized bed,” Symposium on Thermal and Catalytic Sciences for Biofuels and Biobased Products, Chapel Hill, NC, November 2, 2016.
14. E. Ramirez, C. S. Daw, C. E. A. Finney, S. Pannala, J. Halow, Q. Xiong, “Computational study of the bubbling-to-slugging transition in a laboratory-scale fluidized bed,” AIChE National Meeting, San Francisco, CA, November 16, 2016.
15. G. Wiggins, C. S. Daw, E. Ramirez, “Modeling the Impact of Biomass Particle Residence Time on Fast Pyrolysis Yield and Composition,” AIChE National Meeting, San Francisco, CA, November 15, 2016.
16. E. Ramirez, C. E.A. Finney, S. Pannala, C. S. Daw, J. Halow, Q. Xiong, “Computational study of the bubbling-to-slugging transition in a laboratory-scale fluidized bed”, NETL 2016 Workshop on Multiphase Flow Science, Morgantown, WV, August 9, 2016.
17. E. Ramirez, C.E.A. Finney, C. S. Daw, J. Halow, “Optimizing fluidized bed hydrodynamics for biomass fast pyrolysis oil yield”, East Tennessee Collegiate Division Meeting of the Tennessee Academy of Science, Knoxville, TN, April 22, 2016.
18. E. Ramirez, C.E.A. Finney, C. S. Daw, J. Halow, “Resolving hydrodynamic transitions in bubbling bed biomass pyrolysis reactors”, ORAU Annual Meeting on Application of Big Data Analytics, Oak Ridge, TN, March 9, 2016.
19. Q. Xiong, C.S. Daw, and S. Pannala, “Coupling CFD and DAEM for simulating biomass fast pyrolysis in fluidized beds,” presentation, AIChE 2015 National Meeting, Salt Lake City, NV, November 9-13, 2015.
20. E. Ramirez, C. S. Daw, S. Pannala, Q. Xiong, C.E.A. Finney, “Resolving hydrodynamic transitions in bubbling bed biomass pyrolysis reactors”, NETL 2015 Workshop on Multiphase Flow Science, Morgantown, WV, August 12, 2015.
21. E. Ramirez, C. S. Daw, S. Pannala, Q. Xiong, C.E.A. Finney, “Resolving hydrodynamic transitions in bubbling bed biomass pyrolysis reactors”, ORAU 3rd Annual Faculty and Postgraduate Poster, Oak Ridge, TN, August 4, 2015.
22. Cong Lu, Cheng Lei, Rajeev Assary, Larry Curtiss, In silico zeolite catalyzed carbon-carbon coupling reactions for furan upgrading, American Society Meeting, March 25, 205, Denver, CO.
23. Cheng Lei, Larry A. Curtiss, Rajeev Assary, First-principles studies of furan upgrading by Ga/ZSM-5" American Chemical Society Meeting, Aug16-20, 2015, Boston, MA
54 | Bioenergy Technologies Office
Presentations (since 2015 Peer Review) (3/3)
24. Rajeev S. Assary, Larry A. Curtiss, Lei Cheng, Cong Liu, Modeling catalytic vapor phase upgrading using first principles”, American Chemical Society Meeting, Aug 21, 2016, Philadelphia
25. Ferguson, GA; Vorotnikov, V; Wunder, N; Clark, J; Gruchalla, K; Bartholomew, T; Robichaud, D; Beckham, GT, “Multi-dimensional phase diagrams for the coadsorption of aromatic oxygenates and hydrogen on metallic surfaces,” ACS National Meeting, Philadelphia, PA; August 2016.
26. Vorotnikov, V; Baddour, F; Griffin, MB; Habas, S; Ruddy, DA; Beckham, GT; Schaidle, JA, “Computational and experimental insights into the shape and faceting of Rh2P nanoparticles for biomass upgrading,” ACS National Meeting, Philadelphia, PA; August 2016.
27. L. Bu, M.R. Nimlos, D.J. Robichaud, S. Kim. Diffusion of pyrolysis oxygenates in H-ZSM-5. The 252nd ACS National Meeting, August 23rd, 2016, Philadelphia, PA.
28. Lintao Bu, Mark R. Nimlos, David J. Robichaud, and Seonah Kim. Diffusion of Biomass Pyrolysis Products in H-ZSM-5 by Molecular Dynamics Simulations. J. Phys. Chem. C, 2017, 121, 500-510.
29. Peter Ciesielski. Improving Biomass Conversion Processes through Advanced Imaging, Modeling, and Simulation. Workshop on Second Generation Bioethanol 2016, Brazilian Bioethanol Science and Technology Laboratory (CTBE), Campinas, Brazil. Dec 1st, 2016.
In addition, CCPC has been active in organizing the following conferences/meetings:• Symposium organizer, “Advances in Computational Catalysis” (CATL division), American Chemical Society Meeting 2016,
August, Philadelphia• Symposium organizer, “Advances in Computational Catalysis-II” (CATL division), American Chemical Society Meeting 2017,
August, Washington DC
55 | Bioenergy Technologies Office
Commercialization & Technology Transfer
(1) Public release of “Surface Phase Explorer”• Surface Phase Explorer is a web-based tool for exploring
phase diagrams (based on ab initio data) associated with the coadsorption of two species on a surface.
• Available to the public at spe.nrel.gov
(2) Assist Including Biomass Parameters in CSFMB©/CeSFaMBTM
• CCPC assisted Prof. de Souza-Santos in including biomass pyrolysis chemistry into new version of CSFMB© commercial software (Brazil)
• See www.csfmb.com
(3) Public release of CCPC code on GitHub• CCPC code and bioenergy specific modeling parameters
(kinetics, thermal properties, etc.) have been loaded to GitHub
• Available to the public at github.com/pyrolysis
56 | Bioenergy Technologies Office
Milestones: Feedstock Impact Analysis (Task 2)
Due Annual Milestone
Q3(June 30, 2017)
Task 2&3. Predict pyrolysis yields on feedstocks between 2FBR and TCPDU. Use feedstock characterization data provided by INL (WBS 2.2.1.501) for 2 pelletized feedstocks, namely Clean Pine and TCPDU Blend 2 (45% clean pine, 25% forest residues, 30% construction and demolition waste) to construct representative biomass particle models. Develop reactor-flow conversion simulations coupled to ensemble calculations to predict pyrolysis yields of these feedstocks blends in the TCPDU entrained flow reactor and the 2” fluidized bed reactor. Validate the entrained flow reactor model with experimental results reported by 2.4.1.301 to achieve particle-scale pyrolysis simulations that are sufficiently predictive (i.e., can predict yields within measured experimental error). Provide physics-based understanding of any differences observed in the Q2 milestone on 2.4.1.301/2.2.1.304 between the two reactor scales as well as recommendations on how to align residence times and heat transfer between the two reactors to 2.4.1.301/2.2.1.304. [NREL lead with ORNL]
NOTE: This Annual Milestone is linked to the FY17 Q1 milestone in the Integrated and Scale-Up project at NREL (WBS 2.4.1.301)
LinkedMilestone
LINKED MILESTONE in Integrated and Scale-Up project at NREL (WBS 2.4.1.301): Provide the CPC task (WBS 2.5.1.301-5) with mechanical drawings of the TCPDU entrained flow and ex-situ CFP reactors, temperature profiles and other process data from recent operations, crushed feed samples taken from the feed-train and other information as requested to achieve the CPC milestones of developing particle-scale simulations and scaled reactor modeling. (FY17 Q1 milestone)
57 | Bioenergy Technologies Office
Milestones: Reactor Analysis and Scale-Up (Task 3)Due Quarterly Progress Milestone
Q1 Define validation experiments to run during R3 Upgrader reactor commissioning process and provide to 2.4.1.301 at NREL [ORNL lead, NETL and NREL assist]
Note: feeds into Annual Milestone for R3 Upgrader. Linked to Q1 milestone on 2.4.1.301.
Due Stretch Annual Milestone
Q4 (September 30, 2017)
Develop initial R3 Upgrader model in MFiX and provide predictions of residence time and heat transfer and compare to 2” bubbling bed upgrading reactor for scale-up comparison. Enables rapid optimization of R3 Upgrader operation to achieve BETO goals and provides analysis of scale-up feasibility for a 2” bubbling bed upgrading reactor (“Baldwin reactor”) to R3 Upgrader reactors which is critical to attaining value from ChemCatBio catalyst development activities. [ORNL lead, NETL assist]
NOTE: This Annual Milestone is linked to the FY17 Q1 milestone in the Integrated and Scale-Up project at NREL (WBS 2.4.1.301)
LinkedMilestone
LINKED MILESTONE in Integrated and Scale-Up project at NREL (WBS 2.4.1.301): Provide the CPC task (WBS 2.5.1.301-5) with mechanical drawings of the TCPDU entrained flow and ex-situ CFP reactors, temperature profiles and other process data from recent operations, crushed feed samples taken from the feed-train and other information as requested to achieve the CPC milestones of developing particle-scale simulations and scaled reactor modeling. (FY17 Q1 milestone)
Also links to Q
tly
58 | Bioenergy Technologies Office58
Milestones: Vapor Phase Upgrading (Task 4)Due Quarterly Progress Milestone
Q1
JointMilestone
Identify the active-site structure(s) responsible for low-temperature alkane activation and reincorporation into the chain-growth cycle onmodified beta zeolite catalysts. Understand C4 activation over the Cu/BEA catalyst to inform catalyst design to maximize/control C4 reincorporation, andthereby, increase carbon yield from DME to C5+ gasoline products and consequently decrease the MFSP. This is a joint milestone with the ACSC(WBS#2.5.4.304) and the CCPC (WBS#2.5.1.302), where in-situ/operando XAS analysis of the ionic Cu site structure(s) and computational modeling ofthe energetics of C4 activation at the ionic Cu sites will be coupled with experimental C4 activation studies. These combined results will inform an iterativecomputational effort to identify and explore additional ionic metal sites (non-Cu-based) that will enable catalyst design to maximize C4 reactivation andreincorporation into the chain growth pathway. These new, predicted catalyst formulations will be identified as synthetic targets for the next generation ofcatalysts within this project. [NREL lead]
NOTE: This milestone is a Joint Milestone with Advanced Catalyst Synthesis and Characterization (2.5.4.304) and Liquid Fuels via Upgrading of SyngasIntermediates (2.3.1.305). Subcontract with UCLA. Feeds into Q2 milestone on CCPC.
Q3
Linked Milestone
Evaluate the changes in reaction energetics of a Ni-doped Mo2C for furan coupling in the condensed phase. Investigate the vapor phase carbon-carbon coupling of furan molecules in Ni/Mo2C (longer term catalysts) to understand the reaction mechanisms and the catalyst deactivation. Reactionenergetics, including rate determining steps, will be provided to ChemCatBio (WBS # 2.3.1.301), along with a more detailed understanding of the role ofnickel in the Mo2C catalyst and a prediction of the optimum weight percentage of nickel to guide future synthesis and catalyst optimization. [ANL lead]
NOTE: This Quarterly Milestone support activities on ChemCatBio (2.3.1.301).
Q3
Linked Milestone
Computationally screen Lewis-acidic zeolites across 4 reaction classes to guide compositional synthesis for improved activity and selectivity.Model the kinetics of dehydration, dehydrogenation, cyclization, and decarbonylation in zeolite catalyst modified with 5 different Lewis metals. Metals arechosen based on candidates proposed by 2.3.1.314 and will include at least Cu and Ga (remaining 3 TBD) as well as oxidation states and differentterminations (oxide vs hydroxide). Using this kinetic analysis, make recommendations that can be experimentally tested that will prove the hypothesis thatzeolites can be designed to enhance dehydration/dehydrogenation (good reactions) and reduce cyclization/decarbonylation (bad reaction, coke former).[NREL lead, ANL assist]
NOTE: This Quarterly Milestone is linked to planned milestones in FY18 on ChemCatBio (2.3.1.315 and 2.3.1.305).
Q4
Linked Milestone
Identify optimal macroporousity in zeolites for CFP to guide catalyst structural synthesis. Using 3D structural models of a ZSM-5 catalyst particle,investigate the relationship between mesoporous volume fraction and coking/product yields. Models will include mesoporous/microporous diffusion ofspecies, and utilize kinetics from Adajay et al. kinetic scheme (or best available). Models will be informed by and compared to image data produced by theACSC (ORNL). Recommend optimal range of mesoporous volume fraction based on catalyst reactor residence times to ACSC for targeted synthesis andbenchmark results against standard zeolite (e.g. Nexceris) via CCB. [NREL lead]
NOTE: This Quarterly Milestone is linked to milestones on the Advanced Catalyst Synthesis and Characterization (2.5.4.303-5).
59 | Bioenergy Technologies Office59
Milestones: Vapor Phase Upgrading (Task 4)
Due Annual Milestone (Regular)
Q2March 31,
2017
Linked Milestone
Evaluate effect of subsurface oxygen on reaction energetics over Mo2C catalysts. Model the effect ofsurface and subsurface oxygen coverage in Mo2C catalysts on surface oxygen binding energies andreaction energetics of ethanol dehydration. Compare modeling results against experimental ethanoldehydration work on CCB (2.3.1.314). Based on modeling/experimental results determine if oxygenbinding is an appropriate descriptor of catalyst activity and make recommendations for improved catalystdesign (e.g. dopants to reduce oxygen binding strength). [NREL lead]
NOTE: This Annual Milestone is linked to FY18 milestone on ChemCatBio (2.3.1.314).
60 | Bioenergy Technologies Office
Milestones: Liquid Phase Upgrading (Task 5)
Due Quarterly Progress Milestone
Q1 Homologation with NETL and ORNL to devise a path towards use of CFD to model the complex flow in LPU. Determine whether the NETL software, MFIX, is suitable for modeling the 4-phase flow in an LPU reactor to help determine how to avoid flow mal-distributions that can lead to localized fouling, poor utilization of hydrogen and ineffective utilization of the catalyst. [PNNL lead with NETL and ORNL]
Q3 Task 5. Full LPU catalyst model relating optimal particle size and support effects. Subsequent suggested catalyst targets to experimental team. [PNNL lead]
61 | Bioenergy Technologies Office
Collaborating BETO Projects
• All ChemCatBio Projects• Integration and Scale Up – NREL (WBS 2.4.1.301)• Thermochemical Feedstock Interface – NREL (WBS 2.2.1.304)• Feedstock-Conversion Interface Consortium• Multi-scale Physical and Structural Particle Mechanics - INL (Feedstock
Program - WBS 1.2.1.3)• Bio-oil quality improvement and catalytic hydrotreating of bio-oils – PNNL
and ORNL (WBS 2.3.1.301,302)• Thermochemical Platform Analysis Update – NREL and PNNL
62 | Bioenergy Technologies Office
Collaborators and Partners (outside of National Labs)
Universities• UCLA (Ken Houk)• Colorado School of Mines (Cristian
Ciobano, Brandon Knapps)• Northwestern Univ. (Linda Broadbelt)• Washington State Univ. (Brennan
Pecha, Manuel Garcia-Perez )• University of Tennessee (Nour
Abdoulmoumine)
Industry• Industry Advisory Panel Entities:
– RTI– Johnson Matthey– WR Grace– Babcock & Wilcox– Separation Design Group– ExxonMobil– BP (via George Huff, retired)– Virent Energy Systems
• PSRI (Particulate Solid Research, Inc)
63 | Bioenergy Technologies Office
Industry Advisor Panel Expertise Matrix
David Dayton
(RTI)
Tom Flynn(B&W)
Richard Quann(ExxonMobil)
Randy Cortright(formerly
Virent)
Mike Watson
(JohnsonMatthey)
Jack Halow(Separation
Design)
George Huff
(formerly BP)
Steve Schmidt
(WR Grace)
Rick Wessel (B&W)
Feedstock x x xReactor analysis x x x x x
VPUcatalysis x x x x x
LPU catalysis x x x x x
The table below provides a matrix of the experience areas for the CCPC Industry Advisor Panel. The panel represents a diverse range of expertise covering all activity areas of the CCPC.