Connector - HAFELE · Plastic 500 or 5000 262.24.162 262.24.564 262.24.064 262.24.368 262.24.760!...
-
Upload
doankhuong -
Category
Documents
-
view
229 -
download
0
Transcript of Connector - HAFELE · Plastic 500 or 5000 262.24.162 262.24.564 262.24.064 262.24.368 262.24.760!...
Connector
2.2
RTA Connectors Minifix
Minifix 12 Connector housing→ With rim, wood thicknesses from 12mm
•Material: Zinc alloy•For housing: 12 or 18mm•Bolt hole: Ø 7 or 8mm, depending on choice of connecting bolt•Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24 or 34mm)
depending on choice of connecting bolt•For all connecting bolts from the Minifix system
Order referenceAlso available in other colours from 20.000 piecesImprint "12/12" on the underside indicates the use for Minifix 12.
Packing: 100 or 1000 pieces
For wood Drilling Dim.A Drive Packing Nickelthickness depth D mm pieces platedmm mmfrom 12 9.5+0.2 6 PZ2 cross slot or 100 or 262.18.620
flat blade 1000
→ Without rim, wood thicknesses from 12mm
For wood Drilling Dim.A Drive Packing Nickelthickness depth D mm pieces platedmm mmfrom 12 9.5+0.2 6 PZ2 cross slot or 100 or 262.17.620
flat blade 1000
Cover caps, for Minifix 12 without rim
Material Packing Brown Grey Pine Black Whitepieces coloured
Plastic 500 or 5000 262.24.109 262.24.509 262.24.009 262.24.309 262.24.709
For wood Drilling Dim. A Drive Nickelthickness depth D mm platedmm mmfrom 12 9.5+0.2 6 PZ2 cross slot or flat blade 262.25.570 from 16 12.5+0.5 8 PZ2, PZ3 cross slot, flat blade 262.25.614 from 19 14.5+0.5 9.5 or SW4 hexagon socket 262.25.623 from 23 16.5+0.5 11.5 262.25.669 from 29 19.5+0.5 14.5 262.25.696 from 34 22.5+0.5 17.0 PZ2 cross slot or flat blade 262.25.581
Minifix 15 Connector housing→ With rim, wood thickness from 12 mm
2.3
Connector
•Area of application: Only for PZ2 cross slot or flat blade drive
Order referenceAlso available in other colours from 20,000 pieces.
Cover caps, for Minifix 15 without rim
Material Packing Brown Grey Pine Black Whitepieces coloured
Plastic 500 or 5000 262.24.162 262.24.564 262.24.064 262.24.368 262.24.760
•Area of application : Only for SW4 hexagon socket drive
Cover caps, for Minifix 15 without rim
Material Brown Grey Pine Black Whitecoloured
Plastic 262.24.153 262.24.550 262.24.055 262.24.359 262.24.751
Packing: 500 or 5000 pieces
For wood Drilling Dim. A Drive Packing Nickelthickness depth D mm pieces platedmm mmfrom 13 11.0+0.2 6.5 PZ2 cross slot or flat blade 100 or 2000 262.26.531from 15 12.0+0.5 7.5 PZ2 cross slot, flat blade or SW4 hexagon socket 100 or 2000 262.26.532from 16 12.5+0.5 8 100 or 2000 262.26.533from 18 13.5+0.5 9 100 or 1000 262.26.534from 19 14.0+0.5 9.5 100 or 1000 262.26.535from 23 16.5+0.5 11.5 PZ2, PZ3 cross slot, flat blade or SW4 hexagon socket 100 or 1000 262.26.666from 26 18.5+0.5 13 100 or 1000 262.26.670from 29 19.5+0.5 14.5 100 or 1000 262.26.693
→ Without rim, wood thicknesses from 13 - 29 mm
Connector
2.4
→ For Ø 5 mm drill hole
→ For M6 thread
S300 Connecting boltNew development from the Minifix system:•Considerably more robust by increased breaking torque•More secure hold in drill hole by increased overtorque•No sagging into drill hole, drilling depth stop ensures ideal bolt position
•Material: Steel•Finish: Galvanized•Thread: Special thread•Drive: PZ2 cross slot
Thread length Lmm Drilling distance B mm Cat. No.11 24 262.27.462
34 262.28.462
Packing: 100 or 2000pieces
•Material: Steel•Finish: Galvanized•Thread: Special thread•Drive: PZ2 cross slot
Thread length Lmm Drilling distance B mm Cat. No.8 24 262.27.471
34 262.28.471
Packing: 100 or 2000pieces
2.5
Connector
M4 7.5
B 24
B 34
Ø7
M4
Ø9
M4
spreading dowel
MINIFIX connecting bolts
glue-in dowel
• Drive: Cross slot PZ2 and flat blade
Drilling distance B mm Finish Packing, pieces Cat. No.
MINIFIX connecting bolts24 Galvanized 100 or 1000 262.27.930
34 Galvanized 100 or 1000 262.28.937
M4 spreading dowel for drilled hole Ø 5 mmMade of brass, length 8 mm 100, 1000 or
3000051.45.004
M4 glue-in dowel for drilled hole Ø 8 mmMade of nylon, length 10 mm 100, 1000 or
5000039.33.042
M4 glue-in dowel for drilled hole Ø 10 mmMade of nylon, length 10 mm 100 or 1000 039.33.239
Made of nylon, length 13 mm 100 or 1000 039.33.033
With M4 threadFor bolt head Ø 7 mm
• Area of application: For double-sided installationThreaded sleeveFor drilled hole Ø 5 mm
For drilled holeØ 5 mm
L
Packing: 100 or 1000 pcs.
• Area of application: Can be used as capped bolt with sleeve End screw
L
Packing: 100, 1000 or 5000 pcs.
Length L mm Galvanized Cat. No.
15 267.00.911
18 267.00.912
22 267.00.913
Length L mm
8
10
MINIFIX processing aids p Page 2.18
Information p Page 2.3
Steel nickel plated
Steel burnished
Ø5
Nickel platedCat. No.
020.92.711
020.92.720
Connector
2.6
B 34B 34
Ø7Ø7.
9
Packing: 100 or 500 pcs.
For drilled hole Ø 7 mm, with rim
• Area of application: For edge-to-edge joints• Drilling distance B: 34 mm
Installation
Finish Cat. No.
Bright 262.28.286
Galvanized 262.28.786
• Material: Steel• Installation: For double-sided installation
MINIFIX Double bolts
Steel bright
Steel galvanized
=
Ø7
=
Inset distance table
Wood thickness
Distance
Mitre angle
NoteThe distances in the table apply to mitre-joint connectors with drilling distance of B 44 mm.For drilling distance B 24, 20 mm must be deducted from the specified dimensions.
Mitre cut Wood thickness mm12 13 15 16 17 18 19 20 21 22 23 29 32
20° 60.5 61.9 64.6 66.0 67.4 68.7 70.1 71.5 72.8 74.2 75.6 83.9 88.0
22.5° 58.5 59.7 62.1 63.3 64.5 65.7 66.9 68.1 69.3 70.6 71.8 79.0 82.6
25° 56.9 57.9 60.1 61.2 62.2 63.3 64.4 65.4 66.5 67.6 68.7 75.1 78.3
30° 54.4 55.3 57.0 57.9 58.7 59.6 60.5 61.3 62.2 63.1 63.9 69.1 71.7
35° 52.6 53.5 54.7 55.4 56.1 56.9 57.6 58.3 59.0 59.7 60.4 64.7 66.9
40° 51.2 51.7 52.9 53.5 54.1 54.7 55.3 55.9 56.5 57.1 57.7 61.3 63.1
45° 50.0 50.5 51.5 52.0 52.5 53.0 53.5 54.0 54.5 55.0 55.5 58.5 60.0
50° 49.0 49.5 50.3 50.7 51.1 51.6 52.0 52.4 52.8 53.2 53.6 56.2 57.4
55° 48.2 48.6 49.3 49.6 50.0 50.3 50.7 51.0 51.4 51.7 52.1 54.2 55.2
60° 47.5 47.8 48.3 48.6 48.9 49.2 49.5 49.8 50.1 50.4 50.6 52.4 53.2
65° 46.8 47.0 47.5 47.7 48.0 48.2 48.4 48.7 48.9 49.1 49.4 50.8 51.5
67.5° 46.5 46.7 47.1 47.3 47.5 47.7 47.9 48.1 48.3 48.6 48.8 50.0 50.6
70° 46.2 46.4 46.7 46.9 47.1 47.3 47.5 47.6 47.8 48.0 48.2 49.3 49.8
75° 45.6 45.7 46.0 46.1 46.2 46.4 46.5 46.7 46.8 46.9 47.1 47.9 48.3
80° 45.0 45.1 45.3 45.4 45.5 45.6 45.7 45.8 45.9 45.9 46.0 46.6 46.8
85° 44.5 44.6 44.7 44.7 44.7 44.8 44.8 44.9 44.9 45.0 45.0 45.3 45.4
90° 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0 44.0
Inset distances for drilling distance B 44 mm in mm
B 24B 24
B 44B 44
Ø6.
8
For double-sided installation
• Area of application: For mitre cuts of 20° to 90°• Version: Double bolt with joint
Packing: 100 or 500 pcs.
Drilling distance B mm
BrightCat. No.
Galvanized Cat. No.
24 - 262.12.859
44 262.12.037 262.12.939
2.7
Connector
7
Ø39
2
7
Ø35
Ø35
15.29.
5
Dimension A = 9.5
MAXIFIX E Connector housing With cross-slot or hexagon socket drive
• Area of application: For connections that are extremely strong and can bear heavy loads
• Material: Zinc alloy• Diameter: 35 mm• For wood thickness: From 19 mm• Drilling depth: 15.5 mm
Drive Finish Cat. No.
PZ3 cross-slot Nickel plated 262.87.713
Hexagon socket, size 6 Nickel plated 262.87.703
Packing: 100 or 250 pcs.
Trim cap
• Material: Plastic
Packing: 10 or 1000 pcs.
Colour Cat. No.
White 262.87.790
Brown 262.87.190
Beige 262.87.490
Black 262.87.390
Zinc alloy bright
Zinc alloy nickel plated
Zinc alloy nickel coloured
With cross slot
With hexagon socket
Plastic black
Plastic white
Plastic brown
Plastic beige
The Maxifix 35 RTA connector is particularly suitable for connections that arepermanently subjected to high loads such as connections in cabinets and beds,counters and post furniture. The Maxifix 35 RTA connector is particularlysuitable for mass manufacture in the furniture industry.
Connector
2.8
56
Ø8.
4
L16
Ø8.
4
Ø6
Ø4.
5M
8
L9.5
Ø8.
4
12
Ø12
20
MAXIFIX E Double-ended bolt
• Area of application: For flat surface connection• Material: Steel• Finish: Galvanized• Installation: For double-sided installation
Packing: 100 pcs.
Drilling dimensions mm Length mm Cat. No.
2 x 35 56 262.87.921
MAXIFIX E Connecting bolt
Drilled hole Ø 5 mm• Thread length: 16 mm
• Material: Steel• Finish: Galvanized
Packing: 100 pc.
Drilling dimensions mm Length L mm Cat. No.
35 28.5 262.87.931
55 48.5 262.87.932
With M6 or M8 thread• Installation: Screw fixing into sleeves
Thread Drilling dimensionsmm
Length Lmm
Packing, pieces Cat. No.
M8 35 28.5 100 262.87.911
55 48.5 100 262.87.912
M8 sleeve for drilled hole Ø 12 mm, yellow chromatizedScrew-in dowel steel, length 15 mm 100 or 2,000 030.10.584
Screw-in dowel steel, length 17 mm 100 or 2,000 030.10.585
Packing: 100 or 500 pcs.
Thread Cat. No.
M6 264.83.921
M8 264.83.920
• Drive: Flat blade
Cross dowel
For double-sided installation, double-ended bolt
• Area of application: For double-sided installation,for mitre angles of 90°- 180°
• Finish: Galvanized
Drilling distance B mm Bolt length BL mm Cat. No.2 x 44 88 262.87.951
Packing: 10 or 100 pieces
2.9
Connector
9.5
9.5
60
M8
M8
60
9.5
9.5
60
M8
M8
60
육면홀
Cat. No.
M8 thread 282.86.XX1
Packing: 1 or 4 pcs.
Packing: 100 pc.s
사면홀
Cat. No.
M8 thread 262.86.XXX
Packing: 1 or 4 pcs.
MAXIFIX Aluminium cube
• Material: Aluminium• Finish: Bright
• Material: Steel
Key width SW Cat. No.
6
Dim. A mm86
Dim. B mm36
Diametermm6.8 008.28.260
Allen key, L-shape
Connector
2.10
22
24
8.8
1.2
22
24
8.8
1.2
9.5
20
9.5
20
9.5
• Finish: With zinc alloy tightening element• Drive: Cross slot PZ2
Drillingdepth
Zinc alloynickel plated
Zinc alloyburnished
Packing: 100 or 500 pcs.
Drilling depth
For min. wood thickness mm Dimension A mm Drilling depth mm16 8.0 12.7+0.2
19 9.5 14.2+0.2
Packing: 100 or 1000 pcs.
Plastic white
Pastic white aluminium
Plastic black
Plastic beige
Plastic brown
Installation
Dimension A
Wood thickness
Drilling depth• Dimension A: Distance between centre of bolt hole and top edge,
corresponds to half of the wood thickness• Drilling depth: Depends on wood thickness and type of
connector housing that is used
RAFIX-SE Connector housing
Made of zinc alloy
Made of plastic
Drillingdepth
For wood thickness mm
Colour Without ridgeCat. No.
With ridgeCat. No.
16 White 263.10.703 263.14.703
Beige 263.10.403 263.14.403
Brown 263.10.103 263.14.103
White aluminium 263.10.203 263.14.203
Black 263.10.303 –
19 White 263.10.705 263.14.705
Beige 263.10.405 263.14.405
Brown 263.10.105 263.14.105
White aluminium 263.10.205 263.14.205
Black 263.10.305 –
For wood thickness mm
DrillingDepth
DrillingDepth
Finish Without ridgeCat. No.
With ridgeCat. No.
16 Nickel plated 263.11.703 263.15.703
19
12.7
14.2
+0.2
+0.2
12.7
14.2
+0.2
+0.2
14.2 +0.2
Nickel plated 263.11.705 263.15.705
Drilling distance
Drilling depth
Drilling distance
2.11
Connector
11 9
6.5 Ø7
L 9
6.5
Ø7
6.5
Ø7
9L
L 9
6.5
Ø7
RAFIX-SE/TAB Connector bolts
• Material: Steel• Thread: Special thread• Drive: Cross slot PZ2 and flat blade
Steel bright
Steel galvanized
For drilled hole Ø 5 mm
For drilled hole Ø 3 mm
• Material: Zinc alloy• Finish: Galvanized• Thread: Special thread• Drive: Cross slot PZ2
Cat. No.
263.20.131
Packing: 100, 1000 or 2000 pcs.
• Material: Steel• Thread: Special thread• Drive: Cross slot PZ2 and flat blade
Thread length L mm Finish Cat. No.
11
12
7.5
Bright 263.20.141
Galvanized 263.20.847
15 Bright 263.20.150
Galvanized 263.20.856
Packing: 100, 1000 or 2000 pcs.
• Material: Steel• Finish: Galvanized• Thread: Special thread• Drive: Cross slot PZ2
Cat. No.
263.20.981
Packing: 100, 1000 or 5000 pcs.
Finish Packing, pieces Cat. No.
RAFIX connecting boltsBright 100, 1000 or
2000263.20.114
Galvanized 263.20.810
Sleeve for drilled hole Ø 5 mmMade of nylon, length 12 mm 1000 or 5000 042.98.051
Thread length 11 or 15 mm
Thread length 7.5 mm
Thread length 12 mm
Steel burnished
Thread length L mm
Thread length L mm
Connector
2.12
7.5
M4
9
6.5
Ø6.
5
M4
Ø9
M4
spreading dowel
connecting bolts
glue-in dowel
With M4 thread
Finish Packing, pieces Cat. No.
RAFIX connecting boltsBright 100 or 2000 263.21.111
Galvanized 100 or 2000 263.21.817
M4 spreading dowel for drilled hole Ø 5 mmMade of brass, length 8 mm 100 or 3000 051.45.004
M4 glue-in dowel for drilled hole Ø 8 mmMade of nylon, length 8 mm 100, 1000 or
5000039.33.140
Made of nylon, length 10 mm 039.33.042
M4 glue-in dowel for drilled hole Ø 10 mmMade of nylon, length 11 mm 100, 1000 or
5000039.33.239
Made of nylon, length 13 mm 039.33.033
• Material: Steel• Drive: Cross slot PZ2 and flat blade• Installation: For screwing into sleeves for Ø 5, 8 or
10 mm drilled holes or sleeves for double-sided installation
• Area of application: For double-sided installation• Material: Steel
Threaded sleeveFor drilled hole Ø 5 mm
For drilled holeØ 5 mm
L
Packing: 100 or 1000 pcs.
• Area of application: Can be used as capped bolt with sleeve • Material: Steel
End screw
Packing: 100, 1000 or 5000 pcs.
Length L mm Galvanized Cat. No.
15 267.00.911
18 267.00.912
22 267.00.913
30 267.00.916
Length L mm Nickel platedCat. No.
8 020.92.711
10 020.92.720
9W9
6.5
Ø7
For drilled hole Ø 5 mm • For panel thickness W: 16 – 22 mm• Drive: Cross slot PZ2 and flat blade
Packing: 100 pcs.
Finish
Bright 263.24.130+263.24.149
Galvanized
Set Cat. No.Partial Cat. No.
263.24.041
263.24.943
RAFIX-SE Double bolt
Steel bright
Steel galvanized
• Areas of application: For double-sided installation• Material: Steel
263.24.836+263.24.845
2.13
Connector
Confirmat one-piece connector
Material Finish/colour Length L Packing Cat. No.mm pieces
One-piece connectorSteel Galvanized 38 100 or 1500 264.43.091
50 100 or 1000 264.43.600
70 100 or 1000 264.43.291
Pressure plateSteel Yellow - 100 or 500 260.51.909
chromatized
Cover capPlastic Brown - 100 or 500 260.51.196
Confir-plan Universal connector
Installation:•Screw Confirmat one-piece connector into side panel until pressure
plate fits just beneath the protruding head•Slide in pressure plate and tighten Confirmat one-piece connector•Slide on cover cap
Post furniture application Joint application
Dim. X depending on choice of Confirmatone-piece connector
Pressure plate
Cover cap
•Area of application: For concealed connections withhigh corner strength
•Drive: SW4 hexagon socket
Connector
2.14
Ø15
Ø 4,5
Ø 7
2,5
Ø12 Ø15 Ø12,5
Ø10
Ø
Ø 7
4,0
Ø10
Ø4
50
Ø6.
3
• Type of head: Cylinder head• Drive: Size 4 Allen key
Packing: 100 or 1000 pcs.
50
For drive Diameter in mm Colour Cat. No.
PZ3 cross-slot 12 White 045.01.704
Pine coloured 045.01.008
Brown 045.01.106
Black 045.01.302
15 White 045.01.713
Brown 045.01.115
Black 045.01.311
Size 4 Allen key 12,5 White 045.01.731
Pine coloured 045.01.035
Brown 045.01.133
Black 045.01.339
Packing: 100 or 1000 pcs.
• Head hole Ø: 3.0 mm (for PZ3 drive)• Type of head: Countersunk head
Length L mm Finish Packing, pieces Cat. No.
With PZ3 cross-slot38 Galvanized 100 or 1500 264.42.091
50 Galvanized 100 or 1500 264.42.190
70 Galvanized 100 or 1500 264.42.291
With size 4 Allen key38 Galvanized 100 or 1500 264.43.091
50 Galvanized 100 or 1500 264.43.600
Black 100 or 1500 264.43.111
Yellow chromatized 100 or 1000 264.43.193
70 Galvanized 100 or 1000 264.43.291
Black 100 or 1000 264.43.211
L
With shank Ø 7 mm
Trim caps • Material: Plastic• Installation: For pushing into screw head
• Finish: Galvanized• Head hole Ø: 3.0 mm• Type of head: Countersunk head
With shank Ø 6.3 mm
Length in mm Drive Cat. No.
50 PZ3 cross-slot 264.52.190
Size 4 Allen key 264.53.190
Length in mm Finish Cat. No.
50 Galvanized 264.47.191
Black 264.47.111
Packing: 100 or 1000 pcs.
For drilled hole Ø 5 mm
CONFIRMAT One piece connector
Head Ø 10 mm
Head Ø 15 mm
2.15
RTA Connectors Confirmat
HS stepped drill bit for Confirmat screws
Countersinker ØShank Ø, second stepDrill bit Ø
Shank ØCountersinker head Ø
First step: Blind hole Second step: Through hole
Drill bit Ø Cross section Cat. No.mm mm
4 38 + 50 (confirmat) 001.22.467
5 38 + 50 (confirmat) 001.22.485
70 (confirmat) 001.22.390
Packing: 1 piece
Drill bit Ø Shank Ø Counters Suitable for confimat one-piece
fist step second inker Ø connector
step Lenfth Drill bitØ Shank Ø
mm mm mm mm mm mm
4.0 5.0 8.3 38+50 4.0 5.0
5.0 7.0 10 38+50 5.0 7.0
5.0 7.0 10 70 5.0 7.0
•Area of application: For drilling blind holes and through holes in one singleoperation, particularly suitable for rational processing ofConfirmat one-piece connectors
•Suitable for: The Zentrix drilling system
Connector
2.16
RTA and Shelf Connectors
The RTA and shelf connectors fill the functional gap between shelf supports and furniture connectors.The angled connecting surfaces pull the shelf tightly against the side panel and therefore provide good corner stability.Only the small base plate of the support is visible after installation.
Tightening the tensioner in the boss insert locks theshelf in position and connects the support and the bossinsert firmly with each other. This prevents the installedshelves from tipping and provides good angular rigidityand excellent pull-out strengths.
Boss insert with or without tensioner
VARIANTA special screw
Screw-mounted support
Plug-fit support
Distinction is made between:
RTA and Tab 18 Shelf Connectors
Tab 18 with tensioner, connects, locks and secures shelves
•Drill hole in shelf for boss insert•Press-fit boss insert•Attach support to side panel•Slide support onto boss insert•Tighten screw of boss insert
This fitting is used in cases where shelves need to beremoved quickly and used again at a different height.
For screw fixing
For plug fitting
Tab 18 without tensioner, connects shelves
•Drill hole in shelf for boss insert•Press-fit boss insert•Attach support to side panel•Slide support onto boss insert
2.17
Connector
1.3
18
20 Ø18
1.3
7.818
20 Ø18Ø5
Tab 18 Shelf connectors
Screw-fixing
•Version: With tightening element• Installation: Support for screwing or pluging into Ø 5mm drilled hole,
boss insert for press fitting into Ø 18 mm drilled holeDimension A
Dimension AD
Drilling depth
Plug-in
For wood thic
For screw fixing
For plug fitting into Ø 5 mm drill hole
Drill-in boss colour
Natural16
Nickel plated Black
Partial Cat. No. Partial Cat. No.Set Cat. No.
263.60.538+263.64.536 263.66.530
263.60.556+263.64.554 263.66.558
263.60.574+263.64.572 263.66.576
263.60.583+263.64.581 263.66.585
263.60.592+263.64.590 263.66.594
263.60.609+263.64.607 263.66.601
263.60.350+263.64.750 263.66.352
Set Cat. No.
Black19
Light brown23
White26
Brown29
Grey32
Natural16
Black19 263.61.553+263.64.554 263.67.555
263.61.571+263.64.572 263.67.573
263.61.535+263.64.536 263.67.537
Light brown23
Packing: 100 pieces
Varianta Screws 0.8 page
Connector
2.18
Version Cat. No.With horizontal slot and 1 drill hole 260.25.703With vertical slot and 1 drill hole 260.26.700
Packing: 50 or 250 piecesWith horizontalslot
With verticalslot
•Material: Steel•Finish: Nickel plated
Version Cat. No.With horizontal and vertical slot 260.26.980
Packing: 500 pieces
•Material: Steel•Finish: Nickel plated
Version Cat. No.With 2 horizontal slots 558.12.943
Packing: 10 or 50 pieces
•Material: Steel•Finish: Nickel plated
Connecting bracketWith horizontal and vertical slot
With 2 horizontal slots
Chair bracket
Dim. Material / finish Packing Cat. No.
(A x B x C) pieces
mm
With 4 screw holes25 x 25 x 15 Steel, yellow chromatized 100 260.28.502
Stainless steel 50 260.28.002
40 x 40 x 15 Steel, yellow chromatized 100 260.28.504
Stainless steel 50 260.28.004
50 x 50 x 15 Steel, yellow chromatized 100 260.28.505
Stainless steel 50 260.28.005
60 x 60 x 18 Steel, yellow chromatized 100 260.28.506
80 x 80 x 18 Steel, yellow chromatized 50 260.28.508
With 6 screw holes100 x 100 x 20 Steel, yellow chromatized 50 260.28.510
2.19
Connector
Packing Cat. No.250 pcs 260.24.985
•Material: Steel•Finish: Zinc plated
Packing Cat. No.250 pcs 260.22.930
•Material: Steel•Finish: Zinc plated
Angle Bracket for Table
Working top Connector
Connector
2.20
42
L 18
M6
20
15
35
B B
Worktop connector
Rear panels connector
• Material: Steel• Version: Galvanized• Installation: For recess installation
Length L mm Dimension B mm Cat. No.
65 32 – 41 262.96.211
150 75 – 84 262.96.220
Packing: 50 or 200 pcs.
InstallationInsert connector into table tops and tighten using Allen key.
Drilling distance
B = Drilling distance
min. 15
20.8
19.8
1
6.510
7.5
7.5
Ø20
6
For recessed rear panels
• Material: Zinc alloy• For rear panel thickness: max. 6 mm• Installation: For recess installation in side panel
Finish Cat. No.
Nickel plated 260.00.751
Burnished 260.00.153
Packing: 100 or 500 pcs.
Installation
10.5 mm deep
2.21
Bed connectors
HS Bed fitting→ With keyhole slots and screw holes
Height Material Finish Cat. No.mm127 Steel Chromatized 271.19.946
Packing: 100 pieces
•Mounting: or right and left hand use•Installation: For screw fixing
AccessoriesFor bed fittings with keyhole slots→ Cylindrical head screws
Dim. Material Finish Cat. No.mmM6 x 10 Steel Galvanized 020.90.904
Packing: 100 or 1000 pieces
Glue-in sleeve
Screw-in sleeve
Length L Material Finish Version Packing Cat. No.mm piecesGlue-in sleeve11 Polyamide Natural For Ø 10 mm 100, 039.33.26613 colour drill hole 1000 or 039.33.060
5000Screw-in sleeve11 Steel Bright External 1000 030.00.30613 Ø 12 mm, 030.00.315
for Ø 10 mmdrill hole
•Drive: Cros slot
→ Glue-in and screw-in sleeves
Bed connecting
2.22
Bed fitting→ With cranked hook-in part
Height Material Finish Packing Cat. No.mm sets100 Steel Yellow chromatized 1 or 30 271.03.510
Chromatized 1 or 30 271.03.910130 Yellow chromatized 10 or 30 271.03.530
Chromatized 10 or 30 271.03.930
Height 130 mm Striking plate Hook-in part
Height 100 mm Striking plate Hook-in part
•Mounting: For right and left hand use•Installation: For screw fixing
Supplied withEach set:4 Striking plates (2 left and 2 right)4 Hook-in parts (2 left and 2 right)
→ With cranked hook-in part and striking plate
Height Material Finish Packing Cat. No.mm sets95 Steel Bright 1 or 50 271.05.004
Galvanized 1 or 50 271.05.906145 Bright 10 or 30 271.05.013
Galvanized 10 or 30 271.05.915
•Mounting: For right and left hand use•Installation: For screw fixing
Supplied withEach set:4 Striking plates (2 left and 2 right)4 Hook-in parts (2 left and 2 right)
Installation
2.23
Bed connecting
→ For beds with central tie bar, can be disconnected
Material Finish Cat. No.Steel Yellow chromatized 273.03.510
•Installation: For screw fixing
Packing: 1 or 100 pieces
Supplied with1 Supporting bracket1 Retaining plate
Installation
1 Central tie-bar2 Supporting bracket3 Headboard or foot
section4 Retaining plates
Bed connecting
2.24
→ For central-tie bar and slatted frame supportsHeight adjustable
Height Material Finish Cat. No.mm140 Steel Yellow chromatized 273.41.540
Packing: 20 pieces
•Area of application For single and double beds as slatted bed/sofa frame or central tie-bar support•AAdjustment facility: Three-stage vertical adjustment, 4 attachment positions•AInstallation: For screw fixing
Installation referenceWhen used on double beds with a 35 mm thick central tie-bar,the mounting plates must be mounted on the headboard and footsection 5 mm higher than those on the side panels so that thesupporting surfaces of the bracket and the central tie-bar are level.
Supplied with1 Mounting plate1 Supporting bracket
2.25
Connector
8
M4
With collar
Brass
Spreading sleeves
Cat. No.
051.45.004
Packing: 100, 1,000 or 3,000 pcs.
• Length: 8 mm• For drilled hole Ø: 5 mm
• Finish: Bright
With M4 internal thread
For drilled hole Ø 5
Ø8
30
Ø14
315
Length L mm
For wood thickness mm
Partial Cat. No.
SetCat. No.
15 32 – 42 267.05.716 + 267.05.722 267.05.702
20 36 – 46 267.05.716 + 267.05.723 267.05.703
30 46 – 56 267.05.716 + 267.05.724 267.05.704
40 56 – 65 267.05.716 + 267.05.725 267.05.705
50 65 – 76 267.05.716 + 267.05.726 267.05.706
60 76 – 86 267.05.716 + 267.05.727 267.05.707
L
Packing: 100 pcs.
Connecting screw and sleeve • Drive: Cross slot PZ and longitudinal slot
Made of nickel-plated or black steel, with M6 thread
Useable thread depth
→ Without rim
→ Without rim
Internal thread Length L Packing Cat. No.mm pieces
BrightM4 10 100 or 2000 030.07.042M5 12 100 or 1000 030.07.053
Internal External Body Ø Head Ø Hexagonthread thread Ø mm mm mm socketM4 8.0 6.0 8.0 SW4M5 10.0 8.0 10.0 SW5
•Material: Steel•Drive: Hexagon socket
Internal thread Length L Packing Cat. No.mm pieces
GalvanizedM6 13 100 or 1000 030.10.863
24 100 or 2000 030.10.867M8 13 100 or 2500 030.10.883
24 100 or 1000 030.10.887M10 20 100 or 1000 030.10.906
25 100 or 1000 030.10.907Yellow chromatizedM6 15 100 or 3000 030.10.564
17 100 or 2500 030.10.565M8 15 100 or 2000 030.10.584
17 100 or 2000 030.10.585
Internal External Body Ø Head Ø Hexagonthread thread Ø mm mm mm socketM6 10.0 7.5 12.0 SW6M8 12.5 9.5 14.0 SW8M10 15.3 11.5 17.0 SW10
•Material: Steel•Drive: Hexagon socket
Screw in sleeves
Connector
2.26
T-nuts • Material: Steel• Finish: Bright or galvanized
Internal thread Length L mm
Outer Ø mm
Sleeve Ø mm
Edge thicknessmm
M4 7.2 15.0 5.2 0.8
M5 7.9 17.0 6.3 1.0
M6 7.9 19.1 7.7 1.1
M8 9.5 22.2 9.5 1.5
M10 11.1 25.4 11.5 1.6
L
Edge thickness
Internal thread Packing, pieces Surface Cat. No.
M4 1,000 Bright 031.00.249
Galvanized 031.00.445
M5 1,000 Bright 031.00.258
Galvanized 031.00.446
M6 1,000 Bright 031.00.267
Galvanized 031.00.463
M8 500 Bright 031.00.285
Galvanized 031.00.481
M10 500 Bright 031.00.301
Galvanized 031.00.490
Sleeve Ø Outer ØM
4
15
Ø9.
7
Ø5
Ø9.
7
Ø9
M4
Length L mm For wood thicknessmm
BrightCat. No.
GalvanizedCat. No.
15 24 – 26 267.00.011 267.00.911
18 24 – 29 267.00.012 267.00.912
22 28 – 33 267.00.013 267.00.913
30 36 – 40 267.00.016 267.00.916
Length L mm
8
10
Made of nickel-plated steel, with M4 thread
Length in mm Packing, pieces Cat. No.
15 100 or 1000 022.34.157
Threaded screw
• Type of head: Countersunk head• Drive: Cross slot PZ2 and longitudinal slot
Length Lmm
For wood thicknessmm
Packing, pieces Cat. No.
27 28 – 36 100, 500 or 2000 267.01.715
35 37 – 45 100 or 2000 267.01.717
Threaded sleeve
L
Packing: 100 or 5000 pcs.
Made of nickel-plated or burnished steel, with M4 thread
Threaded screw • Area of application: Can also be used as capped bolt for connectors
• Type of head: Pan head• Drive: Cross slot PZ2
Packing: 100 or 1000 pcs.
Sleeve with internal thread
LFor drilled holeØ 5 mm
L
Nickel platedCat. No.
020.92.711
020.92.720
2.27
Bed connecting
Without tip
With tip
Connecting screws and nuts→ Countersunk head screwSW4 hexagon socket
Finish Cat. No.Nickel plated 264.73.750Burnished 264.73.150
Packing: 100 or 1000 pieces
Length L Cat. No.mm60 264.71.76090 264.71.790
Packing: 100 or 1000 pieces
Length L Finish Packing Cat. No.mm piecesWithout tip20 Galvanized 100 or 1000 264.98.92022 Galvanized 100 or 1000 264.98.92235 Galvanized 100 or 1000 264.98.93540 Galvanized 100 or 1000 264.98.94050 Nickel plated 100 or 1000 264.70.75055 Galvanized 100 or 2000 264.70.95560 Nickel plated 100 or 1000 264.70.760
Burnished 100 or 1000 264.70.160Galvanized 100 or 1000 264.98.960
70 Nickel plated 100 or 1000 264.70.77080 Galvanized 100 or 500 264.98.980With tip70 Galvanized 100 or 800 264.70.971
•Material: Steel•Type of head: Countersunk head•Same as DIN 7991, but not fully threaded
•Material: Steel•Finish: Nickel plated•Type of head: Flat head
Rose
•Material: Steel
Bed connecting
2.28
→ Threaded bolt
→ Sleeve nutSW4 hexagon socket
→ Cross dowelWith M6 thread, eccentric
With M6 thread, centric
With M6 and M8 thread, eccentric
Length L Packing Cat. No.mm pieces45 1500 264.72.94560 100 or 500 264.72.96070 1000 264.72.97080 100 or 1000 264.72.980
•Material: Steel•Finish: Galvanized•In compliance with DIN 976
Finish Cat. No.With Pan headNickel plated 264.74.762Burnished 264.74.162With flat headNickel plated 264.75.762Burnished 264.75.162Brass plated 264.75.562
•Material: Steel
Packing: 100 or 2000 pieces
Length L Dim. X Packing Cat. No.mm mm pieces14 8 100 or 1000 264.81.01430 20 100 or 500 264.81.030
•Material: Steel•Finish: Bright
Length L Cat. No.mm14 264.82.01420 264.82.020
•Material: Steel•Finish: Bright
Packing: 100 or 1000 pieces
Packing: 100 or 500 pieces
Length L Dim. X Thread Cat. No.mm mm20 12 M6 264.83.921
M8 264.83.920
•Material: Steel•Finish: Galvanized
2.29
Connector
Ø5
9
10.5
814
1
• Version: With twin grooves
Finish Packing, pieces Cat. No.
Nickel plated 500 or 2000 282.24.717
Ø5
Ø 810 8
4
9
10.5
1
Plug-in, with twin grooves
Finish Packing, pieces Cat. No.
With narrow glass supporting surfaceNickel plated 500 or 1500 282.24.730
Black 500 282.24.330With narrow glass supporting surface
Shelf support
Glass Shelf support
Wood dowels
Biscuit
Load bearing capacity: 80kg load bearing capacity with 4 shelf supports
Diameter Length L Contents Cat. No.mm mm pcs/kg5 25 approx. 3200 267.82.026
35 approx. 2280 267.82.0356 25 approx. 2150 267.82.125
30 approx. 1800 267.82.13035 approx. 1520 267.82.13540 approx. 1325 267.82.140
8 27 approx. 1140 267.82.22730 approx. 1000 267.82.23035 approx. 865 267.82.23540 approx. 760 267.82.24050 approx. 600 267.82.250
10 30 approx. 630 267.82.33035 approx. 530 267.82.33540 approx. 450 267.82.34045 approx. 435 267.82.34550 approx. 360 267.82.35060 approx. 325 267.82.360
12 40 approx. 330 267.82.44050 approx. 260 267.82.45060 approx. 220 267.82.460
16 120 approx. 65 267.82.612155 approx. 46 267.82.615
•Material: Beech•Suitable for automatic feed
Packing: 1kg
Size Depth Length L Width B Cat. No.mm mm` mm
0 8 47 15 267.90.00010 10 53 19 267.90.01020 12 56 23 267.90.0203 16 56 30 267.90.003
•Material: Beech•Thickness: 4 mm
Packing: 100 or 1000 pieces
Shelf Support
2.30
Shelf supportWith screw-on plate
Shelf depth mm max. load bearing capacity kg/m2
200 200250 140 300 80
•Material: Steel•Finish: Galvanized•Version: With screw-on plate•For shelf thickness: ≥24 mm•Adjustment facility: Inclination adjustment: Via support bolt,
height adjustment: Via slots in screw-on plate•Installation: For screw fixing to support element,
for mounting in drilled hole in shelf
Drilling and routing dimensions in shelf
Load bearing capacity (with shelf support spacing =max. 700 mm and evenly distributed load)
Packing: 1 or 20 pieces
Cat. No.Shelf support for concealed installation, 283.33.910with screw-on plate
Shelf depth mm max. load bearing capacity kg/m2
175 180 200 160 225 130 250 100 275 80 300 50
•Material: Steel, eccentric sleeve: Plastic•Finish: Galvanized•Colour: Eccentric sleeve: Black•Version: With screw-on plate and eccentric sleeve•For shelf thickness: ≥24 mm•Adjustment facility: Inclination adjustment: Via adjusting screws,
height adjustment: Via slots in screw-on plate,side adjustment: With eccentric sleeve
•Installation: For screw fixing to support element,for mounting in drilled hole in shelf
Drilling and routing dimensions in shelf
Load bearing capacity (with shelf support spacing =max. 700 mm and evenly distributed load)
Packing: 1 or 20 pieces
Cat. No.Shelf support for concealed installation, 283.33.904with screw-on plate and side adjustment
2.31
Brackets
Fixed bracketLoading bearing capacity 36 - 70 kg per pair
Packing : 1 or 20 pieces
Load bea-ring capacity per pair kg
Dim. Amm
Dim. Bmm
Dim. C mm
Dim. D mm
White coated
Brown coated
36 75 30 100 3.0 287.30.110 287.30.208
40 100 34 125 3.5 287.30.119 287.30.217
125 34 150 3.5 287.30.128 287.30.226
50 150 36 200 4.0 287.30.146 287.30.244
200 42 250 4.0 287.30.164 287.30.262
60 250 46 300 4.0 287.30.173 287.30.271
70 300 47 350 5.0 287.30.182 287.30.290
•Material : steel
Load bearing capacity per pair kg
Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
White coated
80 100 20 150 3.5 287.35.720
120 150 20 200 5.0 287.35.739
130 200 24 250 5.0 287.35.748
150 200 26 300 6.0 287.35.757
Loading bearing capacity 80 - 150kg per pair
Hebgo, load bearing capacity 150 or 500 kg per pair
Packing : 1 or 10 pieces
Packing : 1 pieces
•Material : Aluminium
•Material : steel
•Material: Steel•Version: With locking mechanism
2.32
Brackets
Packing : 2 or 10 pieces
Packing : 1 piece
Packing : 1 or 2 pieces
Folding bracket
Dim. A mm Dim. B mm Dim. C mm Yellow chromat ized
250 30 85 287.41.906
380 30 120 287.41.915Fixing holes for plate Fixing holes for wall mounting
•Materia l: Steel•Version : With locking mechanism and spring loaded support
FunctionPress integral release button to fold down.
Load bearing capacity 40kg per pair
Dim. A mm
Dim. B mm
Dim. C mm
Dim. D mm
Grey primed
330 82 134 50 287.42.403
380 82 134 50 287.42.412
480 82 152 50 287.42.421
580 82 178 50 287.42.430
680 82 178 50 287.42.449
Fixing holes for plate Fixing holes for wall mounting
Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
White coated
Galvanized
300 30 200 25 287.55.730 287.55.930
400 36 270 32 287.55.740 287.55.940Fixing holes for plate Fixing holes for wall mounting
Dimensions in brackets for length A = 400 mm
•Material: Steel•Version: With locking mechanism
FunctionThe folding brackets automatically lock when raised.To fold down slightly raise locking arm.
•Material: Steel•Version: With locking mechanism adjustable in 3 positions
Hebgo, load bearing capacity 150 kg per pair
Load bearing capacity 150 kg per pair
FunctionThe folding brackets automatically lock when raised.To fold down slightly raise locking arm.
2.33
Brackets
Packing : 1 piece
Packing : 1 or 2 pieces
Folding bracket
Function
Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
Brown coated
360 140 120 56 287.48.110
460 140 120 56 287.48.129
560 140 120 56 287.48.138
660 140 120 56 287.48.147
Fixing holesfor top mounting
Fixing holes for wall mounting
Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
Grey primed
420 115 180 60 287.43.400
480 115 180 60 287.43.419
580 115 220 60 287.43.428
680 115 220 60 287.43.437
780 115 220 60 287.43.446
Fixing holes for top mounting Fixing holes for wall mounting
FunctionThe folding brackets automatically lock when raised.To fold down slightly raise locking arm.
Installation referenceAlways use in pairsDistance btween both brackets : Max. 150cm
Tikla, load bearing capacity 200 kg per pair
Hebgo, load bearing capacity 500 kg per pair
•Material: Steel•Version: With locking mechanism
•Material: Steel•Version: With locking mechanism
2.34
Brackets
Dim. A mm
Dim. B mm
Dim. C mm
Yellow chromatized
280 130 30 287.41.951
For extending table tops and worktops.
The sprung folding bracket automatically locks when raised.
Packing : 1 piece
Packing : 1 or 2 pieces
Packing : 1 or 10 pieces
Hebgo, load bearing capacity 500 kg per pair, folding With and without pull-in spring
Tikla, load bearing capacity 500 kg per pair, folding
Installation
Installation
Fixing holes for top mounting Fixing holes for wall mounting
Note dimension M when installing to guarantee functionality.•Dimension M minimum value: 17 mm •Seat thickness: 30 mm•Effective length of support arm : 380mm
version Hotgalvanized
Without pull-in spring
With pull-in spring (folds out automatically) 287.47.920287.47.917
Fixing holes for top mounting Fixing holes for wall mounting
Dim. A mm
Dim. B mm
Dim. C mm
Dim. D mm
Bright galvanized
360 80 180 100 287.53.936
•Material : Steel
•Material : Steel
Brackets for table extensions Folding, load bearing capacity 30 kg per pair
•Area of application : For extending table tops and worktops•Material : Steel•Features : With automatic locking when raised
NotePanel thickness max. 45 mm