CONICAL CONNECTION

CONICAL CONNECTIONB1 | PROSTHTICS

Biotec offers a wide range of easy-to-use and esthetic restorations and prosthetics for almost any clinical need. The diameters of these prosthetics are interchangeable based on preference and need.

Conical Connection | B1 | Prosthetics

2

Healing Caps Used for Conical Connection with a 5°-morse.

Healing caps shape the soft tissue around the implant and prepare the site for the superstructure insertion. The healing cap is selected based on the thickness of the mucosa. In addition, wide healing caps are used for soft-tissue contouring of molars and premolars.

We recommend hand-tightening using a 1,25 mm hex. driver or a motor unit with a force of 10 Ncm.

Catalog NumberHeight

Bio-HCC38022 mm

Bio-HCC38033 mm

Bio-HCC38044 mm

Bio-HCC38055 mm

Bio-HCC38066 mm

Bio-HCC38077 mm


Bio-HCC42022 mm

Bio-HCC42033 mm

Bio-HCC42044 mm

Bio-HCC42055 mm

Bio-HCC42066 mm

Bio-HCC42077 mm

Diameter Ø 3.8 mm Diameter Ø 4.2 mm

Height

Diameter

Titanium Alloy - Ti 6Al 4V ELIMaterial


Biotec 2019 Product Catalog | 3

Implant AnalogImplant Analog (IAs) can be used for all B1 implant diameters (Ø 3.5 mm, Ø 4.0 mm, Ø 4.5 mm, Ø5.0 mm).

We recommend using lab analogs with identical dimensions (for example IA5 and IA6) for Ø5.0 mm or Ø6.0 mm implants to ensure the best rendering of the clinical situation.

Open & Closed Tray TransfersUsed for Conical Connection with a 5°-morse.

Tray transfers are designed for impressions using the open-tray technique when the retentions are sharp, and for the closed-tray technique when they are round.

Catalog No.Open Transfer

Bio-SSC4201

Bio-OC2418

Catalog No.Analog

Bio-AAC6004

Catalog No.Extractor

Bio-EXT10

Catalog No.Cover Screw

Bio-C5023

Catalog No.Closed Transfer

Bio-CTR12

Bio-CTRS1

Body - Stainless Steel; Screws - TitaniumMaterial


4

Body - Stainless Steel; Screws - Titanium

Straight AbutmentsOur wide variety of straight abutments remain stable even when their wall thickness is reduced to 0.1 mm. They are suitable for use in multiple scenarios, for example, single crowns, bridges and the fabrication of cement-retained restorations, single crowns and bridges.

We recommend tightening the screw at a torque between 25 and 30 Ncm.


Shoulder

Height


Bio-CSL09429 mm

Bio-CSL114211 mm

Diameter Ø 3.8 mmCatalog NumberShoulderHeight

Bio-AAC46011 mm8.5 mm





Bio-CSL09389 mm

Bio-CSL113811 mm

Diameter Ø 4.2 mm

Catalog Number Bio-2910

Included with all abutments or

available separately

Straight AnatomicStraight



Plastic AbutmentsPlastic castable abutments on titanium bases are suitable for use by technicians for simple casting of custom-made abutments for construction of the prosthetic restoration. These abutments enable the dental lab to cast on an accurate titanium base. The machined titanium base offers an accurate fit for the implant.


DelrinMaterial

Catalog Number

Bio-PSC2001Hex

Bio-PCS2002Non-Hex

Catalog Number Bio-2910Included with all abutments or available separately

Plastic Abutment with Metal Base Plastic Abutment

Catalog Number

Bio-PLHC101Hex

Bio-PLHC102Non-Hex

6

Angulated AbutmentsAngulated abutments are used when a change to the axis of the implant is required, and normally for constructing cement-retained single crowns or bridges. They are available with 15” and 25” degree angles

We recommend tightening the screw at a torque between 25 and 30 Ncm.


Height

Diameter

Shoulder

Angle


Bio-C09159 mm

Bio-C111511 mm

Angulated 15° Ø 4.71 mm

Standard


Bio-C08159 mm

Bio-C181511 mm


Narrow

Angulated 15°

Catalog NumberShoulderHeight





Anatomic





Bio-C09259 mm

Bio-C112511 mm

Angulated 25° Ø 4.71 mm Angulated 25°

Standard


Bio-C08259 mm

Bio-C182511 mm


Narrow

Catalog NumberShoulderHeight





Anatomic

8

Multi-Unit SystemThe multi-unit system is a solution for screw-retained prostheses, also on complicated-to-restore implants such as multiple-titled implants. It comprises a full range of sizes for both the upper and lower jaws. It also includes a variety of heights and connects to a wide range of complementary products.



Bio-MCC011 mm

Bio-MCC022 mm

Bio-MCC033 mm

Straight Multi Unit


Bio-MCC18011 mm

Bio-MCC18022 mm

Bio-MCC18033 mm

Angulated Multi Unit 18 mm


Bio-MCC30011 mm

Bio-MCC30022 mm

Bio-MCC30033 mm

Angulated Multi Unit 30 mm



Catalog NumberProduct Description

Bio-MOHC1Healing Cap

Bio-MTIOSShort Titanium Sleeve

Bio-OC2418Screw for Open Transfer

Bio-M0AN1Analog

Bio-MOSC1Screw Abutment

Bio-MPLO1Plastic Sleeve

Bio-MTIO1Titanium Sleeve

Bio-MOTR2Open Transfer

Multi-Unit Components

10


Ball AttachmentThe ball attachment superstructure is used to secure a removal prosthesis. This attachment is used together with a stainless steel cap and an intermediate Nylon insert.



Bio-BAC120050.5 mm

Bio-BAC12011 mm

Bio-BAC12022 mm

Bio-BAC12033 mm

Bio-BAC12044 mm

Bio-BAC12055 mm

Bio-BAC12066 mm

for 2.5 mm Ball Attachment

Catalog NumberMaterial

Bio-S3002Silicon Extra Soft

Bio-S3003Silicon Soft

Bio-S3004Silicon Standard

Bio-S3005Peek

Internal Cap

Catalog NumberMaterial

Bio-MC3001Metal

Housing for Internal Cap

Order with Silicon Cap


MA

D

E IN G E R MANY

[email protected]

T. +49.6196.6521096

biotec-implant.com

Franzgraben 6,

34125 Kassel,

Germany

www.biotec-implant.com

12

CONICAL CONNECTION

Documents

Transcript of CONICAL CONNECTION