CONICAL BL · All abutments include final screw - NC is part # 19.032 and RC is part # 19.033....

19.032 19.033 19.037

19.032-P10 19.033-P10 19.037-P10

14.043 14.04414.043-P10 14.044-P10

17.047

13.043 13.044

Price

17.046

Includes both open & closed tray screw

Single Unit $13$90

$13$90

$40

$49

3mm 20.041/3 20.042/3

4mm 20.041/4 20.042/45mm 20.041/5 20.042/5

$24

22.043 22.04415º$75

of 11

NC / RC

10 Pack

24.043

25.043

$3124.044

25.044

Impression Transfer

Single Unit 10 Pack

Use same analog for both 3D printing and stone model

Titanium Healing Abutment

Straight Titanium Abutment

Titanium Temporary Abutment

Final Torx® Screw - Straumann® Compatible

E Engaging NE Non Engaging

ENE

Collar Heights

2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw NC is part # 19.032 and RC is part # 19.033. 35ncm torque.

35ncm torque - Use Straumann driverDESS has drivers on page 10 and Screw dimensions on page 11

2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface. Includes final screw NC is part # 19.032 and RC is part # 19.033. 35ncm torque.

Angled Titanium Abutment

Includes final screw NC is part # 19.032 and RC is part # 19.033. 35ncm torque

3.3 4.1/4.8 Purple

NC RCYellow

Titanium Analog - for 3D Printed Models

CONICAL BL - Compatible with Straumann® Bone Level Implants

www.dess-usa.com [email protected] 855 337 7872

28.04311.044-P10

29.04312.043-P10 12.044-P10

$27$90

$27

$90

30.043

31.043

$45

28.044

29.044

30.044

31.044

62.044 61.043 61.044

71.043 71.044

$38

$45

62.043

$2550.043 50.044

Screw sold seperately. Use screw - NC is part # 19.032 and RC is part # 19.033.

of 11

$4952.043 52.044

11.043-P10Single Unit 10 Pack -screw sold seperately Single Unit10 Pack -screw sold seperately

$45

All Plastic Castable Abutment

Chrome Cobalt Abutment

Premilled Abutment Blank

ø10mmD

ø14mmD

ø14mmDChrome Cobalt

Titanium

Titanium

Desktop Scan Body - Round top

Intraoral Scan Body

ENE

E

NE

Single unit includes final screw. 35 Ncm torque.

3.3 4.1/4.8 Purple

NC RCYellow Price

A hard anodized matted surface ideal for full mouth scanning, made of titanium, autoclavable, and for multiple use. Has an embedded screw for correct positioning, flat top and triangle for accurate scanning. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.

$55Intra Oral Scan Body Driver

DTPEI

Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).

Volume discounts available - Please contact us for details. Includes final screw.

Compatible with Straumann® Bone Level (BL) Implants


Includes final screw and wax up sleeve. 35 Ncm torque.

NP RP WPGREEN3.5

PURPLE4.5

YELLOW5.7

15.043 15.044

15.343 15.344

16.043 16.044

16.343 16.344

$39

50.500-P10

$50

$59

of 11

50.500-P10

32.001-P5

$39 Up to 25º Angulated Screw Channel

0º

10ºPack of 5

Pack of 5

Pack of 5 20º

$5033.100-P533.101-P5

33.102-P5

33.100-P533.101-P5

33.102-P5

32.001-P5

33.001-P5 33.001-P5

37.043 37.044

36.043 36.044

Scan Body on Ti base

Straight Ti base

AngleBase® Ti Base

1,2mm

3,0mm

Compatible with Straumann® Bone Level (BL) Implants

ENE

E

NE

ENE

ENE

NENE

NE

Collar Heights

1,2mm

53.200P10 53.200P10

3.3 4.1/4.8 Purple

NC RCYellow Price

3,0mm

Vertical Walls for Maximum Bond Retention and presandblasted.Includes final screw NC is part # 19.032 and RC is part # 19.033. 35ncm torque.

Plastic sleeves for Straight Ti base

5 Pack

For custom restorations that are cemented to the tibase, not for direct casting

Plastic sleeves for AngleBase®

DT24TB06 DT35TB06

$47

Total Length: 20mm 24mm 35mm

The internal connection of this castable sleeve is non engaging.The angle base ti base is not designed to be casted so when using this sleeve you would cement the restoration onto the anglebase.

Slides on tibase or AngleBase and can be scanned intraorally or with a lab scanner. Available STL file if you want to mill or print them yourselves. For more information click this web link - CLICK HERE

E

NE


DT20TB06

$39

37.043 37.044

36.043 36.044

AngleBase® Ti Base

ENE

$13

AngleBase latch driver

19.443

35ncm torque. Requires AngleBase Latch Driver.

AngleBase Final Screw

Vertical walls for maxumum bond retention and presandblasted.Includes final screw 19.443. 35ncm torque. Requires AngleBase Latch Driver.

Engaging Non Engaging

https://desscatalogs.s3.amazonaws.com/Scan+Body+on+Ti+Base.pdf

88.042/1

88.041/2 88.042/2

88.041/3 88.042/3

88.041/4 88.042/4

$65

14.054Pack of 10 14.054-P10

DLRK-P1 $24

$49divergence up to 20º

DLRK-P2

divergence up to 40ºDLER-P1

DLER-P2

$13$90

$21

$24

$49

Torque is 35ncm

DESS LOC is compatible with Zest® instruments, inserts and housings.

Gingival Height

20º x4 1.5 Ibs / 680g DLN2-P4

20º x4 3.0 Ibs / 1360g DLN3-P4

20º x4 5.0 Ibs / 2270g DLN4-P4

40º x4 1.0 Ibs / 450g DLN1-P4

40º x4 2.0 Ibs / 910g DLN6-P440º x4 4.0 Ibs/ 1810g DLN7-P4

up to

up to

up to

up to

up toup to

$21

Inserts sold in pack of 4

Single Unit

Price

divergencebetweenimplantsInserts

DESS LOC Transfer

Closed tray - made of POM 17.054

DESS LOC Retention Kits

DESS LOC

DESS LOC Analog

1.0mm

2.0mm

3.0mm

4.0mm

E Engaging NE Non EngagingE Engaging NE Non Engaging


of 11

3.3 4.1/4.8 Purple

NC RCYellow

DESS LOC for Straumann® Bone Level (BL) implantsDESS LOC is compatible with Zest® instruments, inserts, and housings. We have other collar heights and angled Locators - contact us for info.

$31

PriceSRA

24.098

25.098

$1319.098

$1314.098

$39

16.098

15.098

Includes final SRA screw part # 19.098 15ncm torque

Titanium Analog for SRA - For 3D Printed Models

Final Torx® screw for on top of SRA abutment

Titanium Temporary Abutment on top of SRA abutment

NEE

NEE

15ncm torque

50.098

52.098

$25

$49

The top of the SRA abutment for SC platform is smaller and not compatible with the DESS SRA compatible components

Engaging NE Non Engaging of 11

Chrome Cobalt Abutment on top of SRA abutment

30.09831.098

$45NEE

Straight Ti base for on top of SRA abutment- Vertical Walls for Maximum Bond Retention

Includes final SRA screw part # 19.098 15ncm torquePresandblasted

Screw sold seperately. Use screw #19.098

Desktop Scan Body - Round top

Intraoral Scan Body

Includes final SRA screw part # 19.098 15ncm torque

A hard anodized matted surface ideal for full mouth scanning, made of titanium, autoclavable, and for multiple use. Has an embedded screw for correct positioning, flat top and triangle for accurate scanning. 7.5mm height x 4mm width.


DTPEI


Compatible with Straumann® BL & BLX SRA Abutments

E

These parts only fit on top of the Strauman screw retained abutment for Straumann BL and BLX

40.043/1 40.044/1

40.043/2 40.044/2

40.043/3 40.044/3

41.743/2

41.743/3

43.043/3

$50

43.043/4

$80

Torque is 35ncm. Requires straight multiunit driver (part DTMURP - or Nobel, BioHorizons, 3i, Neodent, Hiossen, Megagen, Astra EV multi-base straight multiunit driver.)

17º

30º

Price

40.044/4

41.744/2

41.744/3

43.044/3

43.044/4

Straight Multiunit Abutment

Angled Multiunit Abutment

DESS Multiunit for Straumann® Bone Level (BL) Implants

EE

EE

1.5mm

2.5mm

3.5mm

4.5mm

2.5mm

3.5mm

3.5mm

4.5mm

Collar Heights

Collar Heights

17º

30º

of 11 E Engaging NE Non Engaging

3.3 4.1/4.8 Purple

NC RCYellow

Hand tightens onto multiunit. Available as single and pack of 4 (P4)

17.50717.507-P417.80717.807-P4

$40

$16$58$16$58

Height 5mm5mm8mm8mm

17.007

Impression Transfer for Multiunit

Includes both open & closed tray screw

Closed Tray Impression Transfer for Multiunit

14.00714.007-P10

$13$90

Includes abutment screw part #19.544. Screw is Torx® (Straumann Driver). Torque is 35 ncm. Same orientation as Straumann "Type B".

Titanium Multiunit Analog - for 3D Printed Models

10 Pack Single Unit

Use same analog for both 3D printing and stone model.

DESS makes compatible multiunits for Straumann Bone Level implants and components that fit on top of the DESS multiunit abutments are also compatible with the following multiunit abutments which have the same design on the top - Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits

Price

of 11

Multiunit Titanium Healing Abutment

$24

$25

$49

20.100 Use Nobel driver to tighten/loosen healing abutment


DTPEI


52.007A hard anodized matted surface ideal for full mouth scanning, made of titanium, autoclavable, and for multiple use. Has an embedded screw for correct positioning, flat top and triangle for accurate scanning. 7.5mm height x 4mm width.

Desktop Scan Body for Multiunit

50.007Screw sold seperately. Use screw part #19.106 or any multiunit screw on page 9.

Intra Oral Scan Body for Multiunit

32.007-P5 Pack of 5$50

All plastic castable sleeve for on top of multiunit tibase 15.007

Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.

$3915.00715.007/8

6.0mm vertical wall shaft

8.0mm vertical wall shaft

Presandblasted for you.Includes multiunit screw part #19.006 for Nobel unigrip/star driver. For Bulk orders we can package it with any screw you wish.

Straight Multiunit Ti Bases- Vertical Walls for Maximum Bond Retention

$13Multiunit Screw - Nobel Unigrip

19.00619.006 - P10 $90

Single Unit10 PackTorque screw to 15ncm

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Additional screws on page 8 and Screw measurement information on page 9.

BULK ORDER PRICING AVAILABLE

Components for on top of the DESS Multiunit for Straumann® BL Implants

All of these components will work on top of the following multiunit abutments - Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits

of 11

$39

$13

19.306

Screw for AngleBase Ti Base for Multiunit

Torque is 15ncm

DT20TB06 DT24TB06 DT35TB06

$47

Total Length: 20mm 24mm 35mm

AngleBase Ti Base for Multiunit - Vertical Walls for Maximum Bond Retention

36.0074.5mm vertical wall shaft Presandblasted for youIncludes AngleBase screw part #19.306. Requires AngleBase Latch Driver

AngleBase Latch Driver

Up to 25º Angulated Screw Channel

Price

28.007Single UnitPack of 10 11.007-P10

$27

$90

$45

$31Titanium Temporary Abutment on top of Multiunit

24.007

Includes multiunit screw part #19.006 for Nobel unigrip/star driver. 1.5 collar height, total height including collar is 12mm.

All Plastic Castable Abutment on top of Multiunit

Single unit includes multiunit screw part #19.006 for Nobel unigrip/star driver. Pack of 10 - screw is sold seperately

Chrome Cobalt Abutment on top of Multiunit

30.007

Includes multiunit screw part #19.006 for Nobel unigrip/star driver.

BULK ORDER PRICING AVAILABLE

Components for DESS Multiunit for Straumann® BL Implants All of these components will work on top of the following multiunit abutments -

Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits

of 11BULK ORDER PRICING AVAILABLE

$13

DLC Coated screw for Multiunit - use staru unigrip driver from Nobel or DESS

19.206 $20

$13 19.110

$1319.105

19.105-P10Single Unit10 Pack $90

Torque screw to 15ncm



Price

$1319.041Single UnitTorque screw to 15ncm

Flat head Torx screw for Straumann Multi-base - use driver from Straumann or DESS

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 11

.048/1.20 hex screw for Multiunit - use .048 Driver from 3i , Megagen, Hiossen

.0501.27 hex screw for Multiunit - use .050 Driver from Zimmer, BioHorizons, DESS

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 11

This screw will fit into the top of the Straumann Multi-base only.

Beveled head Torx screw for Straumann Multi-base - use driver from Straumann or DESS

This screw will fit into the top of the Straumann Multi-base only.

All of these components will work on top of the following multiunit abutments - Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits

Components for on top of the DESS Multiunit for Straumann® BL Implants

19.106 - for 3i Low Abutment Only19.106 - P10


If you wish to use the DESS straight multiunit tibases (15.007 & 15.007/8) with a .048/1.2 hex screw use part TL.106. Contact us to order.

Single Unit10 Pack

of 11

Drivers, Handles, and Adaptors

35mm

.048/1.20 Hex Latch Driver (for 3i, Megagen, Hiossen)- Laser Mark H 1.20

All drivers lengths are the overall length

18mm 20mm 24mm

$35

Price

DT18H120 DT20HDT20H1201 DT24H120 DT35H120

7mm MDTMAN7009mm MDTMAN900

$35

$65

$35

$45

$35

$45

$35

MDTLAA

Thumb Knob handle for Latch Drivers

Latch style handpiece adaptor for 4x4 Square Connection

DTANGSQ

4x4 Square Driver for inserting Straight Multiunit Abutments

DTMURP

4x4 Square Driver for latch style driver

TWADAP4x4 Square Driver for DESS LOC

DTNBSQ

Adaptor from Straumann torque wrench to 4x4 square connection

$45

DTLOC

Adaptor from Nobel torque wrench to 4x4 square connection

$45

DTSTCA

$45

DTSTSQ

Nobel Biocare Contra Angle Adaptor

DTNBCA

Straumann Contra Angle Adaptor

DT20H122 DT24H122 DT35H122 You can use either the .048/1.22 or .048/1.20 interchangeably

Laboratory handle- for latch drivers

DT35U

$35

$35

DT20U DT24U

Torx® Latch Driver (for Straumann) - Laser Mark T06DT20T06 DT24T06 DT35T06

.050/1.27mm Hex Latch Driver (for Zimmer, BioHorizons, Astra) - Laser Mark H1.27 $35

Unigrip/ Star - Latch Driver ( for Nobel) - Laser Mark UG

DTC20H127 DT24H127 DT35H127

.048/1.22 Hex Latch Driver (for Xive, Frialit, Hiossen) - Laser Mark H1.22 $35

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

Screws fitting Multi-unit® implant systems

19.006 29287available

RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

standa

rd

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT

PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTSScrews fitting Multi-unit® implant systems


RP (4,8) UG 2,00

19.106 LPCTSHavailable

RP (4,8) H1,20 2,25

19.206 29285 RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.110 H1,27 2,00


WP (6,0) UG 2,50

19.231 29286 WP (6,0) UG 2,50

19.300 RP (4,8) Torx® 06 2,15

19.331 WP (6,0) Torx® 06 2,50

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15NcmStandard screw. Can be used for bridges, structures and Zirconia abutments

0º 3,60 1,50 0,00 2,00 M1,4 15NcmReplacement screw for DESS ANGLEBase®. Special screw head design Torx for angulated screw channels up to 25º

Screws fitting Straumann® Bone Level® implants and similar implant systems

ON IMPLANT

19.032 025.2908available

NC Torx® 06 2,10

19.033 025.4908available

RC Torx® 06 2,20

19.037 025.4900available

NC/RC Torx® 06 2,10

19.104 025.4906available


19.311 NC/RC Torx® 06 2,30

19.443 NC/RC Torx® 06 2,10

ON MULTI-BASE®

19.041 025.0900-04 NC/RC Torx® 06 2,20

19.105available


standa

rd

standa

rd

standa

rd

75º 7,85 2,50 3,35 2,00 M1,6 35Ncm Standard screw


75º 7,85 2,50 3,35 2,00 M1,6 35NcmFits non-engaging NC/RC and all castable DESS abutments

0º 0,70 8,15 1,55 4,60 2,00 M1,6 35NcmFlat seat screw. Better for bridges, structures and zirconia abutments, ever without threaded hole.

0º 8,10 1,50 4,00 2,70 M1,6 20NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 0,85 8,15 1,40 4,75 2,00 M1,6 35NcmReplacement screw for DESS ANGLEBase®


0º 4,50 1,50 0,00 3,00 M1,4 15NcmFlat seat screw. Better for bridges and structures

of 11

19.098 025.0900-04 NC/RC Torx® 06 2,20 55º 3.65 1,65 0,20 1.80 M1,4 15Ncm Screw for on top of SRA

Screw on top of SRA

Screw Dimensions

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER



RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

standa

rd

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT

PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTS



RP (4,8) UG 2,00

19.106 LPCTSHavailable

RP (4,8) H1,20 2,25

19.206 29285 RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.110 H1,27 2,00


WP (6,0) UG 2,50

19.231 29286 WP (6,0) UG 2,50

19.300 RP (4,8) Torx® 06 2,15

19.331 WP (6,0) Torx® 06 2,50

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15NcmStandard screw. Can be used for bridges, structures and Zirconia abutments

0º 3,60 1,50 0,00 2,00 M1,4 15NcmReplacement screw for DESS ANGLEBase®. Special screw head design Torx for angulated screw channels up to 25º

Screws fitting Straumann® Bone Level® implants and similar implant systems

ON IMPLANT

19.032 025.2908available

NC Torx® 06 2,10

19.033 025.4908available

RC Torx® 06 2,20

19.037 025.4900available


19.104 025.4906available


19.311 NC/RC Torx® 06 2,30

19.443 NC/RC Torx® 06 2,10

ON MULTI-BASE®

19.041 025.0900-04 NC/RC Torx® 06 2,20

19.105available


standa

rd

standa

rd

standa

rd



75º 7,85 2,50 3,35 2,00 M1,6 35NcmFits non-engaging NC/RC and all castable DESS abutments

0º 0,70 8,15 1,55 4,60 2,00 M1,6 35NcmFlat seat screw. Better for bridges, structures and zirconia abutments, ever without threaded hole.

0º 8,10 1,50 4,00 2,70 M1,6 20NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 0,85 8,15 1,40 4,75 2,00 M1,6 35NcmReplacement screw for DESS ANGLEBase®


0º 4,50 1,50 0,00 3,00 M1,4 15NcmFlat seat screw. Better for bridges and structures

CONICAL BL · All abutments include final screw - NC is part # 19.032 and RC is part # 19.033....

Documents

Transcript of CONICAL BL · All abutments include final screw - NC is part # 19.032 and RC is part # 19.033....