From Tricksguide.Com "How to Configure Ilo on Your Hp Proliant"
Configure raid on an hp server
-
Upload
karan-mishra -
Category
Documents
-
view
1.003 -
download
0
Transcript of Configure raid on an hp server
ESXi and vCenter Server 5 Documentation > vSphere Storage > vSphere Storage Appliance > Install and Configure the VSACluster Environment
Configure RAID on an HP Server
Create a RAID logical volume that uses all physical disks on a server.
N o te
VMware recommends that you use RAID5 for SAS drives and RAID6 for SATA drives.
Procedure
1 Start or restart the HP server.
2 At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
3 Provide credentials at the login prompt.
4 Press Ctrl+S to open the Intel Boot Agent Setup Menu.
5 Press F8 to open the ROM Array Configuration menu.
The Main Menu appears.
6 From the Main Menu, select Create Logical Drive and press Enter.
7 Select all physical disks under Available Physical Drives.
8 Select an appropriate RAID level under RAID Configurations.
VMware recommends that you use RAID 5, 6, or 10.
9 Press Esc.
The HP RAID controller creates the RAID logical drive.
Configure RAID on an HP Server http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsa.doc_10/GUI...
1 of 1 7/7/2013 10:41 AM