Configurator PRIMERGY RX600 S6 - Fujitsu · 2019. 1. 10. · Title: Configurator PRIMERGY RX600 S6...

PRIMERGY RX600 S6System configurator and order-information guide

Contents

Instructions

Configuration diagram

Configurator

0 0 System software

1 I Basic unit

2 II Processor

3 III Memory

4 IV USB devices / optical devices

5 V Hard disk drives / SSD´s

6 VI Tape Devices

7 VII Internal SAS RAID Controller

8 VIII External SCSI / SAS controller

9 IX Fibre Channel controller

10 X Communication / Network / CNA / IB

11 XI iRMC S2 advanced pack / TPM

12 XII Optional PSU / Power Cord

Change report

PRIMERGY Server

September 2014

System configurator and order-information guidePRIMERGY RX600 S6 Status 2014-08-29

Instructions

This document contains basic product and configuration information that will enable you to configure your system viaPC-/System-Architect

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section III Memory, example

There are X memory slots which can be equipped with XXX MB

It is permissible to make up to X passes through the memory upgrade options

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB Memory XXX MB

X times

max. X times per system max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates. 4x

Please note that there are information symbols which indicate necessary information.

Further information in the internet see:

http://ts.fujitsu.com/products/standard_servers/index.html (internet)

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx(extranet)

Prices and availability see price list and PC-/System-Architect.Subject to change and errors excepted.

Fujitsu PRIMERGY Server 2 of 18

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

System configurator and order-information guidePRIMERGY RX600 S6 Status 2014-08-29

Configuration diagram PRIMERGY RX600 S6

Basic Unit ( I )

Memory ( III )

Processor ( II )

Slot

Local View LCD Display 5.25"x 0.5" bay for CD/DVD

UFM

Key: Included in basic unit

Option

2. PSU

PC

Ie S

lot

1

PC

Ie S

lot

2

4. PSU 3. PSU

PC

Ie S

lot

4

Ethern

et

Hot Plug Redundant Power Supply (XII)

PC

Ie S

lot

3

PC

Ie S

lot

10

PC

Ie S

lot

5

PC

Ie S

lot

6

PC

Ie S

lot

7

PC

Ie S

lot

8

1. PSU

PC

Ie S

lot

96 75

Hard disk drives ( V )

2.5" SAS

2.5" SAS

2.5" SAS

2.5" SAS

2.5" SAS

2.5" SAS

2.5" SAS 2.5" SAS

8 9 10

USB

USB

USB

Video

Operating

Panel

FR

ON

T V

IEW

RE

AR

VIE

W

RA

ID C

on

tro

ller

5.25"x 1.6" Tape Drive

USB devices / optical devices (IV)

Tape drives ( VI )

Video

Ethern

et

Ethern

et

Ethern

et

Servic

e LAN

USB

USB

COM

Xeon

CPU 3

PC

Ie 1

.0 x

4,

1/2

le

ng

ht

PC

Ie 2

.0 x

8,

3/4

le

ng

ht,

op

en

en

d

Me

mo

ry B

oa

rd 5

( 8

DIM

M s

lots

)

MA

IN B

OA

RD

Me

mo

ry B

oa

rd 1

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 2

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 3

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 4

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 6

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 7

( 8

DIM

M s

lots

)

Me

mo

ry B

oa

rd 8

( 8

DIM

M s

lots

)

Xeon

CPU 4

Xeon

CPU 1

Xeon

CPU 2

PC

Ie 2

.0 x

8,

3/4

le

ng

ht,

ho

t-p

lug

,

op

en

en

d

Slo

t fo

r in

tern

al R

AID

Co

ntr

.

Extension slots:

external SCSI / RAID controller ( VIII ), Fiber Channel ( IX ), Communication/Network ( X )

PC

Ie 2

.0 x

8,

3/4

le

ng

ht,

ho

t-p

lug

,

op

en

en

d

PC

Ie 2

.0 x

8,

3/4

le

ng

ht,

op

en

en

d

PC

Ie 2

.0 x

4,

3/4

le

ng

ht

PC

Ie 1

.0 x

4,

1/2

le

ng

ht

PC

Ie 2

.0 x

16

, 3

/4 le

ng

ht

PC

Ie 1

.0 x

4,

1/2

le

ng

ht

1

PC

Ie 1

.0 x

4,

1/2

le

ng

ht

2 3 4


System configurator and order-information guideStart PRIMERGY RX600 S6 PRIMERGY RX600 S6 Status 2014-08-29

Section I Basic unit

PRIMERGY RX600 S6 Systemboard with

- Intel 7500 chipset with serial QPI links (Quick Path Interconnect)

Rack unit 4U with - 10 PCI-Express Slots

- 2 hot-plug power supplys (additional PSU as option) 2x PCIe 1.0 x4 (2x half length)

- 2 memory boards (up to 6 additional boards optional) 3x PCIe 2.0 x4 (1x half length, 2x 3/4 length)

- LCD-Display for LocalView (Service Display) 4x PCIe 2.0 x8 (4x 3/4 length; 2x hot plug)

- 1 bay (0,5" height) for optical disc drives 1x PCIe 2.0 x16 (1x 3/4 length)

- 1x 5.25" bays FH (1,6" high) for accessible drives - 4x socket for Xeon E7-28xx /-48xx processor

- 8 bays for 2.5" SAS/SATA HDD`s - SATA controller on-board (for ODD)

-w/o Power cord for rackmounting (ICE 320 C14->C13 plug) - iRMC S2 (integrated Remote Management Controller)

- no Rack- mounting kit included with graphics controller and 10/100Mbit Service LAN-port

- 2x Dual-Port GBit LAN Controller on-board (4 ports, WOL-capable)

Base unit Standard with - SAS RAID controller as option

- 8x Fan (redundant) S26361-K1402-V400 - ServerView Suite Software package

incl. ServerStart, ServerBooks, Management Software and Updates

Interfaces:

Front side

- 3x USB 2.0

- 1x VGA (15 pin)

Rear Side

- 2x USB 2.0

- 1x VGA (15 pin)

- 1x RS-232-C (serial, 9 pin)

- 4x on board LAN RJ45, 1x Service LAN RJ45

Internal

- 1x internal USB Interfaces for backup device

- 1x internal port for uSSD Module (Embedded vSphere ESXi 4.0)

S26361-F2735-E111 S26361-F2735-E285

No Rackmount-Kit option Rack Mount Kit F2-C S7 LV

Only for loose deliveries telescopic rails, full extraction,

No mounting in Racks possible toolless mounting for RMK and CMA

max. 1x per system consisting of

- 1 pair of drop-in rails with CMA Adapter

- lenth variable (559mm- max. 860mm for RX600)

1x per system

Rack Mount Kit F2-C S7 LV

length variable (559mm- 860mm)

S26361-F4530-E13 S26361-F4530-E10 for loose delivery

Bracket 3U in asymmetrical racks Mounting of RMK in symmetrical racks with CMA adapter

(no support brackets needed) S26361-F2735-L285

without CMA adapter

S26361-F2735-L286

S26361-F2735-E71 S26361-F2735-E82

Cable management Rack Cable Management Arm CMA 2U

lateral f. PRIMECENTER Racks for 2U Server in racks S26361-F2735-L7

- for asymmetrical FJ racks - for symmetrical racks Sideways cable management arm

or PRIMECENTER racks M1 or 3rd party racks for mounting in asymmetrical FJ racks.

not for 3rd party racks Fujitsu racks Has to be mounted above the RMK.

1x per system 1x per system

S26361-F2735-L82

Cable management arm 2U

for asymmetrical and symetrical racks

PRIMECENTER M1 Racks

S26361-F2201-L20

Cable arm

SNP:SY-F1647E301-P for asymmetrical and symetrical racks

Installation ex works for one Has to be mounted above the RMK.

server or subsystem.

Hereby the rack will be delivered

completely pre-mounted and S26361-F2735-L31

all wired connections are tested. For mounting in asymmetrical PC racks:

Support bracket 3U S26361-F2735-L31

PCR M1 16U, 24U, 42U: has to be ordered for loose delivery

Systems and components

will be delivered installed in the rack

"Rack-mounting ex factory"

To be ordered only together with This service is to be ordered once

a PRIMECENTER M1 rack per installable server/storage

S26361-K827-Vxxx subsystem, in order to get the

server/storage subsystem

mounted into the racks.

refer PCR M1 rack configurator In case of the 46U PCR S2

max. 1x per System this service has to be ordered,

to get the mounting kits and the

cables installed.

A


System configurator and order-information guideA PRIMERGY RX600 S6 Status 2014-08-29

Section II Processor

Two CPU must be configured as minimum, as maximum 4 CPU´s are possible.

Later upgrading to a 3 or 4 processor system is also possible, but may require adding of PSU modules.

Extension CPUs must be identical to the already installed CPU´s.

Following CPU´s can be configured max. 4x per system

As minimum two CPU´s must be configured

Quad-Socket CPU`s

- 1x Intel Xeon processor E7-4800 / E7-8800 series

with 1066 or 1333MHz Frontside Bus incl. passive heat sink

occupies socket for one CPU

Xeon E7-4807 6C/12T 1.86GHz 18MB 4.80GT/s 95W S26361-F3999-E480

2x - 4x Xeon E7-4820 8C/16T 2.00GHz 18MB 5.86GT/s 105W S26361-F3999-E482



Xeon E7-4860 10C/20T 2.26GHz 24MB 6.40GT/s 130W S26361-F3999-E486 extended lead time



Following CPU´s can only be configured 2x per system

Two CPU´s must be configured

Dual socket CPUs

- 1x Intel Xeon processor E7-2800 series

2x with 1066 or 1333MHz Frontside Bus incl. passive heat sink

occupies socket for one CPU



B

INTERNAL USE ONLYINTERNAL USE ONLY

Memory: max. 64 DIMM Slots DDR3 LV RDIMM

Memory

Board 4

Slot 3

Memory

Board 3

Memory

Board 2

Memory

Board 1

SATA

ODD/

HDD

Intel®

QuickPath

Interconnect

IO Riser

VGA

USB (3x front,

2x rear, 1x int.)

RJ45

RJ45

RJ45

RJ45

RJ45

Managem.

LAN Port

front/

rear

GBit

LAN

GBit

LAN

Dual GB

Intel® (Kawela)

Slot 9

Slot 10

8x 2.5“ SAS HDD

Memory

Board 7

Memory

Board 8

Memory

Board 5

Memory

Board 6

GBit

LAN

GBit

LAN

Dual GB

Intel® (Kawela)

serial

PORT

10/100

LAN

iRMC S2

(Pilot II)

(8GB/s)

(4GB/s)

(2GB/s)

(8GB/s)

(16GB/s)

(4GB/s)

SAS Riser

SAS Ctr.

LSI 2108

512MB

iBBUMB2 MB2

MB2 MB2

Xeon®

75xx

(Nehalem-EX)

Xeon®

75xx

(Nehalem-EX)

Xeon®

75xx

(Nehalem-EX)

USB

RAID

Key

IOH #2(Intel® 7500)

IOH #1(Intel® 7500) TPM

ICH10

(4GB/s)

(8GB/s)

(8GB/s)

(1GB/s)

(1GB/s)

(2GB/s)

(0.5GB/s)

RMII

1/2 length PCIe Gen 1 x4

32MB shared

Video Mem.

3/4 length

1/2 length

3/4 length

1/2 length

PCIe Gen2 x4

PCIe Gen2 x4

Slot 5

Slot 4

Slot 8

PCIe Gen2 x16

PCIe Gen2 x4

Slot 2

Slot 1PCIe Gen2 x8

PCIe Gen2 x8

PCIe Gen1 x4

RX600 S6 Architecture

CPU #1

CPU #3CPU #4

Hot-Plug Slots

CPU #2

Slot 6

Slot 7

PCIe Gen2 x8

PCIe Gen2 x8

(2GB/s)

MB2 MB2

MB2 MB2

MB2 MB2

BoB MB2

MB2 MB2

Xeon®

E7-x800

Xeon®

E7-x800

Xeon®

E7-x800

MB2 MB2

Xeon®

E7-x800

Copyright 2011 FUJITSU TECHNOLOGY SOLUTIONS7


System configurator and order-information guideB PRIMERGY RX600 S6 Status 2014-08-29

Section III Memory

C

2-w

ay in

terl

evin

g4

-wa

y in

terl

evin

gIn

ter

So

cke

t M

irro

rin

gIn

tra

So

cke

t M

irro

rin

gS

pa

re M

od

e

Memory configuration modes There are four different configuration modes: – Independend mode (no special order code) – Spare mode (S26361-F4003-E1) – Interleaving mode (S26361-F4003-E2) – Mirroring mode (S26361-F4003-E3) -Spare mode (S26361-F4003-E1) In spare mode, one pair of DIMMs will be spare for the other pairs. The spare DIMMs must have the same capacity or higher than the other DIMMs. DIMM sparing only relates to BOBs. There is no sparing over memory boards or CPUs. Spare Mode requires at least 2 identical set of DIMM´s (with 4 Modules each). -Interleaving Mode (S26361-F4003-E2) In Interleaving mode the cache lines will be distributed over different memory boards for better performance. All DIMMS must be identical (same capacity and technology)! Three types of interleaving are available: 2-way interleaving (also called "Intra Socket Interleaving") The data are distributed over the memory controller of each CPU. This type is possible with 2, 3 or 4 CPUs and at least 2 memory boards on two CPU. Each CPU requires 1, 2, 3 or 4 set of DIMM´s (with 4 Modules each). 4-way interleaving mode (also called "Inter Socket Interleaving") The data are distributed over the memory controller of two CPUs. This type is possible with 2 or 4 CPUs and 2 memory boards per CPU. Each CPU requires 1, 2 or 4 set of DIMM´s (with 4 Modules each). 8-way interleaving mode (also called "Inter Socket Interleaving") The data are distributed over the memory controller of four CPUs. This type is only possible with 4 CPUs and 8 memory boards and requires 4, 8, 12 or 16 set of DIMMs (with 4 Modules each). According to the amount of installed Memory Boards and DIMMs system will be set automatically to highest possible Interleaving Mode. -Mirroring mode (S26361-F4003-E3) In mirroring mode, all data are copied within the main memory. Therefore only 50 % of the total memory is available for the operating system. Mirroring mode requires 2 memory boards per CPU. All DIMMS must be identical (same capacity and technology)! Two types of mirroring modes are available: Intrasocket Mirroring Memory will be mirrored from one memory controller to the other memory controller within the same CPU. Intrasocket Mirroring is possible for all CPU configurations (2, 3 or 4). Intersocket Mirroring Memory will be mirrored from one memory controller to an memory controller on another CPU (home agent to mirror agent). Intersocket mirroring is only possible with 4 CPUs (not with 2 or 3 CPUs).

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

CPU Memory board

Board

Memory DIMMs

1

Mbox 1

Slot #1

BO

BB

OB

Mbox 2

Slot #2

BO

BB

OB

3

Mbox 1

Slot #3

BO

BB

OB

Mbox 2

Slot #4

BO

BB

OB

Data are distributed

over Mboxes of each CPU

Data are distributed

over Mboxes of each CPU

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

Memory DIMMs

Slot #2

1 BO

BB

OB

Memory board

Board

Slot #4

BO

BB

OB

Mbox 1

Mbox 2

Slot #1

BO

B

Mbox 1

Mbox 2

CPU

3

Slot #3

BO

BB

OB

BO

B

Data are distribute

d over Mboxes of two CPU

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

Memory DIMMs

1

Mbox 1

Slot #1

BO

BB

OB

Mbox 2

Slot #2

BO

BB

OB

CPU Memory board

Board

3

Mbox 1

Slot #3

BO

BB

OB

Mbox 2

Slot #4

BO

BB

OB

Mirroring from MBox

to MBox on same CPU

Mirroring from MBox

to MBox on same CPU

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

CPU Memory board

Board

Memory DIMMs

BO

B

Mbox 2

BO

B

Slot #2 BO

BB

OB

1

Mbox 1

Slot #1

BO

B

Slot #4

BO

BB

OB

Slot #3

3

Mbox 1

Mbox 2

BO

B

Mirroring from MBox

to MBox on other CPU

Home Agent

Mirror Agent

Home Agent

Mirror Agent

2B 1B

2A 1A

2D 1D

2C 1C

2B 1B

2A 1A

2D 1D

2C 1C

Mbox 1

Mbox 2

3

Memory DIMMs

1

Slot #1

BO

B

CPU Memory

board

BO

B

Mbox 2

Mbox 1

Slot #3

BO

BB

OB

Spare DIMMs

Spare DIMMs


System configurator and order-information guideC PRIMERGY RX600 S6 Status 2014-08-29

Max. Capacity / Features

The system can be equipped with up to 64 DIMMs (distributed on 8 memory boards)

Each DIMM slot can optionally be equipped with 4GB, 8GB, 16GB or 32GB DDR3 LV DIMM modules,

so the maximal memory size is 2048 GB with 32GB modules.

ECC with SDDC (Chipkill) is standard for RX600 S6.

Max. Memory Speed depends on CPU QPI Speed, but is limited to 1066 MHz.

S26361-F4003-E1 S26361-F4003-E2 S26361-F4003-E3

Spare Mode Installation Interleaving Mode Installation Mirrored Mode Installation

BIOS setup for Spare mode BIOS setup for Interleaving mode BIOS setup for Mirrored mode

Preinstallation ex factory Preinstallation ex factory Preinstallation ex factory

max. 1x per system max. 1x per system max. 1x per system

on special release as long as available as soon as available

S26361-F4523-E642 S26361-F4523-E643 S26361-F4523-E644 S26361-F4523-E645 S26361-F4523-E646 S26361-F4523-E647

Memory 16GB Memory 32GB Memory 32GB Memory 64GB Memory 128GB Memory 64GB

LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

consisting of consisting of consisting of consisting of consisting of consisting of

4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots

max. 16x per system max. 16x per system max. 16x per system max. 16x per system max. 16x per system max. 16x per system

on special release as long as available as soon available

S26361-F4523-E642 S26361-F4523-E643 S26361-F4523-E644 S26361-F4523-E645 S26361-F4523-E646 S26361-F4523-E647

Memory 16GB Memory 32GB Memory 32GB Memory 64GB Memory 128GB Memory 64GB

up to 3x LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

memory consisting of consisting of consisting of consisting of consisting of consisting of

upgrades 4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

in base unit occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


Per CPU max. 2 Memory Boards can be installed

S26361-F3990-E600 - with 2 CPU = max. 4 Memory boards

Memory Board RX600 S6 (two included in the Base unit)

for 8 DIMM modules - with 3 CPU = max. 6 Memory boards

up to 6 max. 6x per system - with 4 CPU = max. 8 Memory boards

additional

memory boards

on special release as long as available as soon as availabale

with S26361-F4523-E642 S26361-F4523-E643 S26361-F4523-E644 S26361-F4523-E645 S26361-F4523-E646 S26361-F4523-E647

up to 12x Memory 16GB Memory 32GB Memory 32GB Memory 64GB Memory 128GB Memory 64GB

memory LV RDIMM (single rank) LV RDIMM (dual rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (quad rank) LV RDIMM (dual rank)

upgrades consisting of consisting of consisting of consisting of consisting of consisting of

4x 4GB modules 4x 8GB modules 4x 8GB modules 4x 16GB modules 4x 32GB modules 4x 16GB modules (4Gb)

occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots occupies 4 memory slots


D


System configurator and order-information guide

D PRIMERGY RX600 S6 Status 2014-08-29

Section IV USB devices / optical devices / UFM

Setup RX600 S6 by SV Installation Manager is supported with following configurations:

built in CD/DVD or USB CD/DVD, no Floppy disk drive:

UNC Network share reachable

If installation is done locally, make sure you have USB stick

available for driver installation.

One UFM (USB Flash Module) can be configured

The UFM is bundeld with VMWare offering:

VMware vSphere Embedded UFM Device S26361-F2341-E431

S26361-F3269-E2 S26361-F3641-E2

DVD-RW supermulti slim SATA Blu-ray Triple Writer slim SATA

all formats, DUAL/DL, DVD-RAM 6x BD-RW, 8x DVD, 24x CD

1x only W2K, W3K and Linux BD DL and all CD/DVD formats

0.5 x 5.25", black bezel 0.5 x 5.25"

max. 1x per system max. 1x per system

E


System configurator and order-information guideE PRIMERGY RX600 S6 Status 2014-08-29

Section V Hard disk drives

SAS 6Gb/s 2.5" with hot plug/hot replace tray

300GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E130 configuration of 450GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E145 SAS-HDDs/SSDs requires600GB 10000rpm,<4,5ms, 16MB Cache S26361-F4482-E160 SAS RAID controller900GB 10000rpm,<4,5ms, 32MB Cache S26361-F4482-E190

1,2TB 10000rpm,<4,5ms, 64MB Cache S26361-F5247-E112 as soon as available

146GB 15krpm,<4,5ms, 32MB Cache S26361-F4482-E514

300GB 15krpm,<4,5ms, 32MB Cache S26361-F4482-E530

500GB 7.2krpm,<9,5ms, 64MB Cache S26361-F5228-E500

1TB 7.2krpm,<9,5ms, 64MB Cache S26361-F5228-E100

max. 8x per system

Solid State Disk, Mainstream Endurance*

SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray

100GB, Mainstream Performance S26361-F5303-E100 as soon as available




SSD SAS 12Gb/s 2.5" with hot plug/hot replace tray as soon as available

200GB, Enterprise Performance S26361-F5297-E200 Interface SAS12Gb/s and SAS 6Gb/s.

400GB, Enterprise Performance S26361-F5297-E400 SAS 12Gb/s support is not released

800GB, Enterprise Performance S26361-F5297-E800

1.6TB, Enterprise Performance S26361-F5297-E160

*) SSD Mainstream Endurance

max. 8x per system 10DWPD over 5y

SSD SATA 2.5" MLC

as long as stock as long as stockmax. 8x S26361-F5225-E100 S26361-F5225-E200 S26361-F5225-E400

SSD 100GB SSD 200GB SSD 400GB

Solid State Disk Solid State Disk Solid State Disk

SATA 6Gb/s SATA 6Gb/s SATA 6Gb/s

hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray


SSD SAS 2.5" SLC

as long as stock as long as stock

S26361-F4541-E100 S26361-F4541-E400

SSD SAS 100GB, SLC SSD SAS 400GB, SLC

Solid State Disk Solid State Disk

SAS 6Gb/s SAS 6Gb/s

Enterprise Perfomance Enterprise Perfomance

hot plug/hot replace tray hot plug/hot replace tray


SSD SAS 2.5" MLC

as long as sock as long as stockS26361-F4581-E100 S26361-F4581-E200 S26361-F4581-E400

SSD SAS 100GB, MLC SSD SAS 200GB, MLC SSD SAS 400GB, MLC

Solid State Disk Solid State Disk Solid State Disk

SAS 6Gb/s SAS 6Gb/s SAS 6Gb/s

hot plug/hot replace tray hot plug/hot replace tray hot plug/hot replace tray


S26361-F4522-E351 S26361-F4522-E781 S26361-F4522-E121

PCIe-SSD 365GB MLC PCIe-SSD 785GB MLC PCIe-SSD 1.2TB MLC

ioDrive2 365GB ioDrive2 785GB ioDrive2 1.2TB

max. 4x PCIe 2.0 PCIe 2.0 PCIe 2.0

25nm Lithography 25nm Lithography 25nm Lithography

PCIe x4, Low Profile PCIe x4, Low Profile PCIe x4, Low Profile


loose delivery: S26361-F4522-L351/L781/L121

F


System configurator and order-information guideF PRIMERGY RX600 S6 Status 2014-08-29

Section VI Tapes devices

A) RDX USB3.0 Drive (connected to USB3.0 adapter card or internal USB2.0 port)

S26361-F3749-E1 The adapter is also available as optional (loose) delivery

USB3.0 PCIe x1 adapter card with FH and LP bracket included

Sunrich U-720 S26361-F3749-L501

PCIe x1

1 port intern, 1 port extern

USB 3.0 A jacks

max. 1x per system

S26361-F3750-E4

RDX Drive USB3.0 5.25" internal RDX cartridges must be ordered separately

100MB/s, USB 3.0 RDX 320GB = S26361-F3857-L320

Connector: USB 3.0 "B" RDX 500GB = S26361-F3857-L500

with USB cable RDX 1TB = S26361-F3857-L600

without RDX cartridges 10x RDX320 = S26361-F3857-L329

1.6 * 5.25", black bezel

max. 1x per system additional RDX cartridges can be ordered

RDX 320GB = S26361-F3857-L320

RDX 500GB = S26361-F3857-L500

S26361-F3750-E324 RDX 1TB = S26361-F3857-L600

RDX 320 5.25" 10x RDX320 = S26361-F3857-L329

1x 100MB/s, USB 3.0

Connector: USB 3.0 "B" The bundle is also available as optional (loose) delivery

with USB3.0 cable S26361-F3750-L324 with USB3.0 cable for adapter card.

with 320GB RDX cartridge The USB3.0 Adapter card or the USB2.0 cable set

1.6 * 5.25", black bezel S26361-F3750-L20 must be ordered with the drive!

max. 1x per system

additional RDX cartridges can be ordered

RDX 320GB = S26361-F3857-L320

S26361-F3750-E504 RDX 500GB = S26361-F3857-L500

RDX 500 5.25" RDX 1TB = S26361-F3857-L600

100MB/s, USB 3.0 10x RDX320 = S26361-F3857-L329

Connector: USB 3.0 "B"

with USB3.0 cable The bundle is also available as optional (loose) delivery

with 500GB RDX cartridge S26361-F3750-L504 with USB3.0 cable for adapter card.

1.6 * 5.25", black bezel The USB3.0 Adapter card or the USB2.0 cable set

max. 1x per system S26361-F3750-L20 must be ordered with the drive!

additional RDX cartridges can be ordered

S26361-F3750-E604 RDX 320GB = S26361-F3857-L320

RDX 1000 5.25" RDX 500GB = S26361-F3857-L500

100MB/s, USB 3.0 RDX 1TB = S26361-F3857-L600

Connector: USB 3.0 "B" 10x RDX320 = S26361-F3857-L329

with USB3.0 cable

with 1TB RDX cartridge The bundle is also available as optional (loose) delivery

1.6 * 5.25", black bezel S26361-F3750-L604 with USB3.0 cable for adapter card.

max. 1x per system The USB3.0 Adapter card or the USB2.0 cable set

S26361-F3750-L20 must be ordered with the drive!

B) DDS USB Drive (connectet to internal USB port)

S26361-F3324-E4 S26361-F3325-E4

Tape drive DDS Gen5 USB 5.25" Tape drive DDS Gen6 USB 5.25"

36GB, 3MB/s, USB 2.0 80GB, 6MB/s, USB 2.0

Connector: USB "B" Connector: USB "B"

with USB cable with USB cable

incl. description (Ger/US) incl. description (Ger/US)

data and cleaning cartridge data and cleaning cartridge

1.6 * 5.25", black bezel 1.6 * 5.25", black bezel


C) LTO SAS Drive (connected with PCIe SAS controller)

S26361-F3257-E4

4 port SAS RAID Controller

LSI

MegaRAID SAS 1064

no Cache, no BBU

RAID 0, 1 & 1E

SAS 3Gb/sec

4 internal ports

PCIe x4, 160mm

max. 1x per system

as soon as available

S26361-F3561-E4 S26361-F3626-E2 S26361-F3627-E1 S26361-F3787-E1

Tape drive LTO3HH Ultrium SAS Tape drive LTO4HH Ultrium SAS Tape drive LTO5HH Ultrium SAS Tape drive LTO6HH Ultrium SAS

400GB, 60MB/s, SAS 3Gb 800GB, 120MB/s, SAS 6Gb 1500GB, 140MB/s, SAS 6Gb 2500GB, 160MB/s, SAS 6Gb

Connector: mini-SAS Connector: SATA Connector: mini-SAS Connector: mini-SAS

incl. SAS cable incl. SAS cable incl. SAS cable incl. SAS cable

incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US) incl. cleaning cartridge

data and cleaning cartridge data and cleaning cartridge data and cleaning cartridge without data cartridge

1.6 * 5.25", black bezel 1.6 * 5.25", black bezel 1.6 * 5.25", black bezel 1.6 * 5.25"

max. 1x per system max. 1x per system max. 1x per system max. 1x per system

G

USB 3.0 adapter



G PRIMERGY RX600 S6 Status 2014-08-29

Section VII internal SAS RAID 0/1 and RAID5 Controller for HDD´s

as long as available

S26361-F3554-E8 S26361-F3669-E2 S26361-F3669-E3

RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal

Based on chip LSI SAS 2008 RAID Controller must be ordered, Based on chip LSISAS2208 Based on chip LSISAS2208

LSI MegaRAID if at least one internal HDD is configured! LSI MegaRAID LSI MegaRAID

no Cache, no BBU 1GB Cache with ECC 1GB Cache with ECC

RAID 0, 1 & 1E RAID 0, 1, 10, 5, 50, 6, 60 RAID 0, 1, 10, 5, 50, 6, 60

Support for 3Gb/s and 6Gb/s optional FBU optional FBU

SATA and SAS hard drives Support for 3Gb/s and 6Gb/s Support for 3Gb/s and 6Gb/s

PCIe x4 SATA and SAS hard drives SATA and SAS hard drives

Low-profile MD2 form factor PCIe x8 PCIe 3.0 x8

max. 1x per system Low-profile MD2 form factor Low-profile MD2 form factor

Loose delivery max. 1x per system max. 1x per system

RAID Advanced Software Option

S26361-F3669-L660 S26361-F3669-E660

RAID Advanced Software Options RAID Advanced Software Options

License Activation Key License Activation Key

for CacheCade 2.0 and FastPath for CacheCade 2.0 and FastPath

for 1 Controller for 1 Controller

1x S26361-F3669-E100

S26361-F3554-E512 TFM Module for FBU option

RAID Ctrl SAS 6G 8port internal (flash and FBU control logic)

Based on chip LSI SAS 2108 max. 1x per Controller

LSI MegaRAID

512MB Cache with ECC

RAID 0, 1, 10, 5, 50, 6, 60 optional BBU S26361-F3669-E155 Flash Backup Unit

Support for 3Gb/s and 6Gb/s Flash Backup Unit requires modified

SATA and SAS hard drives with 55cm cable set system unit

PCIe x4 max. 1x per Contr., 2x per System with serial number

Low-profile MD2 form factor ≥ YLCE005108

max. 1x per system

Lose delivery TFM/ FBU option

S26361-F3257-E170 S26361-F3669-L100

Cache Battery Backup Unit TFM Module for FBU option

with 70cm cable set (flash and FBU control logic)

max. 1x per controller max. 1x per Controller

S26361-F3669-L110

Flash Backup Unit

BBU max. 2x per system possible with 25, 55, 70 cable set

for loose delivery please order max. 1x per Controller

S26361-F3257-L110

H



G PRIMERGY RX600 S6 Status 2014-08-29

Section VIII external SCSI / SAS controller

B. SAS controller for external backup drives

S26361-F3628-E1

max. 3x

C. SAS RAID controller for JBOD subsystems

as soon as available as soon as available

S26361-F3593-E3 S26361-F3713-E3

8 port SAS 6G RAID Controller RAID Ctrl SAS 6G 8port external

LSI The RAID controller can be used only for the connection of LSI MegaRAID SAS 9286-8e

MegaRAID SAS9280-8e 6Gb/s external subsystems (FibreCAT SX40, Eternus JX40) 1GB Cache with ECC

512MB Cache with ECC RAID 0, 1, 5, 6, 10, 50 & 60

RAID 0, 1, 10, 5, 50, 6 & 60 Cables for the connection from the RAID Controllers without FBU

without iBBU to the subsystem see configurator FibreCAT SX40 SAS 6Gb/sec

SAS 6Gb/sec The usage of the internal SAS ports is not supported ! 8 port external

max. 2x 8 port external PCIe 3.0 x8, MD2 form factor

PCIe x4, 167mm Lose delivery FBU option full height bracket

full height bracket S26361-F3669-L110 max. 2x per system

max. 2x per system Flash Backup Unit

with 25, 55, 70 cable set

max. 1x per Controller S26361-F3669-E125

S26361-F3257-E170 Flash Backup Unit

Cache Battery Backup Unit BBU max. 2x per system possible with 25cm cable set

with 70cm cable set for loose delivery please order max. 1x per Controller

max. 1x per controller S26361-F3257-L110

Loose delivery

RAID Advanced Software Option

S26361-F3669-L661 S26361-F3669-E661

RAID Advanced Software Options RAID Advanced Software Options

License Activation Key License Activation Key

for CacheCade 2.0 and FastPath for CacheCade 2.0 and FastPath

for 1 Controller for 1 Controller

P

SAS Controller 6Gb/s 8 port

LSI SAS9200-8e

PCIe 2.0 x4,

ext: 8 port

max. 2x per system



PRIMERGY RX600 S6 Status 2014-08-29P

Section IX Fibre Channel

Qlogic EmulexNo mix of different vendors

for FC or FCoE controllers.

S26361-F3631-E1 S26361-F3631-E2

8GBit/s FC Controller 8GBit/s FC Controller

Qlogic Qlogic loose delivery:

QLE2560, full height bracket QLE2562, full height bracket Single channel S26361-F3631-L1

1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller Dual Channel S26361-F3631-L2

LC Interface for 50µm Fiber LC Interface for 50µm Fiber with mounted LP bracket

PCIe x8, 170mm PCIe x8, 170mm FH bracket is not included

max. 6x per system max. x per system

S26361-F3961-E1 S26361-F3961-E2


Emulex Emulex loose delivery:

LPe1250, full height bracket LPe12002, full height bracket Single channel S26361-F3961-L1

1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller Dual Channel S26361-F3961-L2

LC Interface for 50µm Fiber LC Interface for 50µm Fiber with mounted LP bracket

PCIe x4, 170mm PCIe x4, 170mm FH bracket is not included


as soon as available as soon as available

S26361-F4994-E1 S26361-F4994-E2


Emulex Emulex loose delivery:

LPe16000, low profile bracket LPe16002, low profile bracket Single channel S26361-F4994-L501

1 channel 16GBit/sec FC Contr. 2 channel 16GBit/sec FC Contr. Dual Channel S26361-F4994-L502

LC Interface for 50µm Fiber LC Interface for 50µm Fiber contains LP and FH brackets.

PCIe x8, 170mm PCIe x8, 170mm


All controllers for the connection of external storage systems are delivered without cables.

For the configuration of external cabling see the configurator for external storage systems.

For Fibre Channel SAN also other componets like switches, SFPs and optical wires are

orderable (for details see price liste)

Q



I PRIMERGY RX600 S6 Status 2014-08-29

Section X Communication / Network / CNA / IB

on-board LAN Controller

2x Dual Gbit Ethernet Contr. on-board Teaming: Failover, Load Balancing

Intel 82576 NS (Kawela wo/IPsec) The Intel LAN Controllers Pro 1000MT, 1000MF, 1000PT, 1000PF

can be used with the on-board controller in Teaming Mode

ext: 4x RJ45 connector, Cat 5 Two onboard LAN ports can likewise educate a team.

1Gbit/s Ethernet Adapter

S26361-F4610-E2 S26361-F4610-E4

(I350-T2) (I350-T4)

Gbit Ethernet Controller Dual 1000TX Gbit Ethernet Controller Quad 1000TX

PLAN CP 2x1Gbit Cu Intel I350-T2 PLAN CP 4x1Gbit Cu Intel I350-T4

4x Intel Powerville based 2 port Server Ad. Intel Powerville based 4 port Server Ad.

PCIe x4, Low Profile PCIe x4, Low Profile

full height (FH) bracket full height (FH) bracket

ext: for RJ45-plug, Cat 5 ext: for RJ45-plug, Cat 5


Loose delivery with FH and LP bracket:

I350-T2 S26361-F4610-L502I350-T4 S26361-F4610-L504

I1


System configurator and order-information guideI1 PRIMERGY RX600 S6 Status 2014-08-29

10GbE 2-Port SFP+ for MMF Module 10Gbit/s Ethernet Adapter

S26361-F3629-E2 S26361-F3752-E2

(D2755) (Intel X540-T2)

10 Gigabit Ethernet Contr. dual port SFP+ Eth Ctrl 2x10GBase-T

Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ Intel Twinville based 2 port Server Ad.

Intel Niantic based dual port 10Gb NIC PCIe x4, Low Profile

PCIe x8, Low Profile, Full Height Bracket Full Height (FH) bracket

ext: 2x SFP+ cage ext: for RJ45-plug, Cat 6


S26361-F3986-E3 S26361-F3986-E4 V:TWX Connector-PY

SFP+ Module MMF 10GbE LC SFP+ Module SMF 10GbE LC for all Twinax (FTS,BR,CI)

SFP+ module for 10 Gbit SFP+ module for 10 Gbit max. 2x per controller

6x 2x Ethernet 50µm FO cabling Ethernet 9µm FO cabling

ext:LC-SR-connector ext:LC-LR-connector

max. 2x per controller max. 2x per controller

The SFP+ modules are also available as loose delivery

S26361-F3986-L3

S26361-F3986-L4

Instead SFP+ Modules, SFP+ twinax cables from the switch vendors may be used

S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *) *) in SA only

SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable shown in

customized twinax cable for customized twinax cable for customized twinax cable for cabling view

full rack setup ex factory full rack setup ex factory full rack setup ex factory

cable length is selected by cable length is selected by cable length is selected by

requirement in the factory requirement in the factory requirement in the factory

Fujitsu branded cable Brocade branded cable Cisco branded cable

max. 2x per controller max. 2x per controller max. 2x per controller

separate orderable 10Gb Ethernet cables

S26361-F3989-L102 SFP+ active Twinax Cable Fujitsu 2m

The controller D755 is delivered without SFP+ modules for optical S26361-F3989-L105 SFP+ active Twinax Cable Fujitsu 5m

cables, these must be ordered separately. S26361-F3989-L110 SFP+ active Twinax Cable Fujitsu 10m

Loose delivery options (FH and LP bracked included) S26361-F3873-L501 SFP+ active Twinax Cable Brocade 1m

D2755 S26361-F3629-L502 S26361-F3873-L503 SFP+ active Twinax Cable Brocade 3m

X540-T2 S26361-F3752-L502 S26361-F3873-L505 SFP+ active Twinax Cable Brocade 5m

S26361-F4571-L101 SFP+ passive Twinax Cable Cisco 1m



S26361-F4571-L107 SFP+ active Twinax Cable Cisco 7m

while stocks last S26361-F4571-L110 SFP+ active Twinax Cable Cisco 10m

S26361-F3592-E2

10GBit/s CNA

Emulex

6x OCe10102

2 channel 10GBit/sec CNA

SFP+ Cage

PCIe x8, 170mm

max. 6x per system

S26361-F3592-E108

SFP+ Module MMF 10GbE LC

SFP+ module for 10 Gbit V:TWX Connector-PY The SFP+ Module is also available as loose delivery

Ethernet FO cabling for all Twinax (FTS,BR,CI) S26361-F3592-L108

ext:LC-connector max. 2x per controller Instead SFP+ Modules, SFP+ twinax cables from

max. 2x per controller the switch vendors may be used

2x

S26361-F3989-E600 *) S26361-F3873-E500 *) S26361-F4571-E500 *) *) in SA only

SFP+ active twinax cable SFP+ active twinax cable SFP+ passive twinax cable shown in

customized twinax cable for customized twinax cable for customized twinax cable for cabling view

full rack setup ex factory full rack setup ex factory full rack setup ex factory

cable length is selected by cable length is selected by cable length is selected by

requirement in the factory requirement in the factory requirement in the factory

Fujitsu branded cable Brocade branded cable Cisco branded cable

max. 2x per controller max. 2x per controller max. 2x per controller

separate orderable 10Gb Ethernet cables

S26361-F3989-L102 SFP+ aktives Twinax Kabel Fujitsu 2m



S26361-F3873-L501 SFP+ aktives Twinax Kabel Brocade 1m



S26361-F4571-L101 SFP+ passives Twinax Kabel Cisco 1m



S26361-F4571-L107 SFP+ aktives Twinax Kabel Cisco 7m

S26361-F4571-L110 SFP+ aktives Twinax Kabel Cisco 10m

I2


System configurator and order-information guideI2 PRIMERGY RX600 S6 Status 2014-08-29

G) Infiniband HCA's

S26361-F4475-E102

IB HCA 40Gb 1 port QDR

IB HCA 1x 40Gb Low Profile PCIe form factor with exchangeable Full Height (FH)

PCIe 2.0 (5,0GT/s) or Low Profile (LP) bracket

PCIe x8, low profile

max. 4x ext: 1x QSFP-connector

max.4x per system

S26361-F3996-E500 only within a rack If additional length of copper cable or optical cable are needed,

InfiniBand Cu Cable 40Gb configuration then they must be ordered from the cable vendor directly

customized Copper cable are also available for loose delivery as

QSFP, 1m and 3m S26361-F3996-L561, QSFP, 56Gb, 1m

max. 1x per adapter S26361-F3996-L563, QSFP, 56Gb, 3m

J



J PRIMERGY RX600 S6 Status 2014-08-29

Section XI System Management Products (RemoteView)

S26361-F1790-E241

iRMC S2 advanced pack

integrated remote management controller

activation key for

graphical console redirection

and remote media redirection

max. 1x per system

Be aware of import restrictions!

S26361-F3552-E1 Loose delivery for later

TPM Module integration possible for customer.

Trusted Platform Module on Motherboard

Use according to import restrictions S26361-F3552-L1

max. 1x per system TPM Module add-on kit

for later integration (loose delivery)

Trusted Platform Module on Motherboard

Use according to import restrictions

max. 1x per system

Section XII Optional PSU / Power cords / Region kit

In addition to the base configuration with two power supplies units (1+1 redundancy)

max. two addition PSU´s can be installed.

Configurations with more than 2 CPU´s or more than 2 memory boards

requiring one additional PSU (2+1 redundancy).

For configurations with more than 6 memory boards or if phase redundancy/dual power feed

is requested two additional PSU´s needed. (3+1 or 2+2 redundancy).

For later upgrade the following kit is available:

S26113-F561-E20 S26113-F561-L20

3nd / 4rd power supply module 3nd / 4rd power supply module

850W, hot plug 850W, hot plug

for max. configuration for max. configuration

w/o 1x power cord ICE320 C14->C13 w/o 1x power cord ICE320 C14->C13


Certification for India

Hint: No country specific powercord configurable with Certification for India

Power cord options (1x per PSU)

T26139-Y1968-E100 Powercord for rack, 4m, grey, Power cord has to be ordered separately

max. IEC 320 C14->C13 connector

4 x

T26139-Y1742-E10 USA, Canada, 1.8m, grey

T26139-Y3850-E10 Option "no powercord", for Countries without

specific cable orderable like e.g. China

S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130

REGION KIT APAC/EMEA/India REGION KIT JP REGION KIT America

For Shipments to Asia pacific, For Shipments to Japan regions For Shipments to America

EMEA or India regions

1x per system 1x per system 1x per system

End PRIMERGY RX600 S6

S26361-F3301-E123 For shipments to India mandatory!



PRIMERGY RX600 S6 Status 2014-08-29

Change Report

Date Order number Changes

2014-07-30 S26361-F2735-E82 defined as „can“-position to RMK

2014-06-30 S26361-F3301-E123 Added certification for India

2014-06-16 S26361-F3592-E2 phase out OCe10102

EOL D3035 S26361-F3739-xxx EOL D3035

2014-06-16 S26361-F3740-xxx EOL D3045

2014-06-16 S26361-F3242-xxx EOL Sheepshead Bay

2014-04-11 S26361-F3531-E2 deleted

2014-03-17 S26361-F3739-E201 phase out

2014-03-17 S26361-F3740-E201 phase out

2014-03-17 S26361-F3610-E202 EOL

2014-01-31 S26361-F5247-E112 New 1.2TB 2.5" SAS 10K HDD added.

2014-01-31 S26361-F5303-* New SATA SSDs added.

2014-01-31 S26361-F5297-* New SAS SSDs added.

2013-10-18 Optional USB Comps no longer available2013-10-16 S26361-F4610-E2 / -E4 added new 1Gb NICs from Intel

2013-08-05 S26361-F4482-E* HDD Cache updated.

2013-05-28 S26361-F3787-E1 LTO6 added

8x as max. total number of FC controller removed

2013-04-05 S26361-F3669-E125 FBU option of S26361-F3713-E3 changed from -E170 to -E125 (25cm FBU cable)

2013-03-25 S26361-F3669-E3 RAID Ctrl SAS 6G 1GB (D3116C) added

2013-03-14 S26361-F3750-E324/504/E604 RDX & Cartridge bundles added

2013-01-23 S26361-F3669-E660/L660 RAID Advanced Software Options: Bypass for E660; L660 added

2013-01-23 S26361-F3669-E661/L661 RAID Advanced Software Options for RAID Ctrl SAS 6G 8port external added

2013-01-23 S26361-F3593-E1 Changed to S26361-F3593-E3 and set as soon as available

2013-01-23 S26361-F3271-E1 SAS Controller 3Gb/s 8 port is EOL => removed

2013-01-23 S26361-F3270-E1 SCSI U320 extern is EOL => removed

2013-01-08 S26361-F5228-E*** New 2.5" BC SAS 7.2K HDD

2012-11-22 F3749-E4 and F3750-E4 "as soon as available" removed

2012-11-22 S26361-F3857-E4 "as long as available" added

2012-11-14 S26361-F3669-E2 Oder number for 6G RAID Controller changed from -E3 to -E2

2012-10-18 S26361-F5423-E647 Added 64 GB Memory

2012-10-08 S26361-F3749-Ex Added USB 3.0 Adapter

2012-10-08 S26361-F3750-Ex Added RDX Drive

2012-10-01 S26361-F3986-E4 New SFP+ Module SMF 10GbE LC

2012-09-28 S26361-F4541-E200 EOL: 200GB SSD SAS SLC

2012-09-24

S26361-F2735-E285

/-L285 /-L286 added new Rackmount Kit with vario carrier 559-860mm, rails with and without CMA adapter

2012-09-21

S26361-F3740-E1

S26361-F3739-E1 added new LAN Controller (D3035 / D3045)

2012-09-11 S26361-F2735-E285 Change to new RMK

2012-08-31 S26361-F3669-E3 Oder number for Cougar3 changed to -E3

2012-08-16 S26361-F4523-E646 Add 128GB / 4x 32GB Memory Module

2012-07-25 S26361-F4581-Exxx Add SSD SAS MLC

2012-07-16 S26361-F3857-L160/L169 RDX Cartridge 160GB is EOL => removed

2012-06-29 S26361-F4522-xxx PCIe-SSD 781GB / 1,2TB MLC added

2012-06-14 S26361-F5225-E*00 New order for SATA SSD´s

2012-04-23 S26361-F3669-E1 new int. SAS RAID Controller added

2012-04-23 S26361-F3713-E1 new ext. SAS RAID Controller added

2012-01-30 S26361-F3641-E2 new Blue-ray Triple Writer added

2011-12-21 S26361-F4482-E114 SAS HD 6G 144GB - no longer available

2011-10-30 S26361-F4541-Ex00 new SAS SSD with 100, 200, 400 GB added - as soon as available

2011-10-01 S26361-F3298-E64 64 GB SSD - no longer available

2011-06-28 Mixmatch between Emulex FC controllers and FCoE Controller now possible

2011-05-30 S26361-F3601-Exxx BC-SATA HDD removed

2011-05-30 S26361-F2735-E245 Cable Management Arm changed

2011-05-06 PSUs changed, Power cables added, Region Kit added

2011-04-26 S26361-F3986-E3 SFP modules for 10GbE adapter changed

2011-03-18 S26361-F4522-Exxx PCIe SSD added

2011-03-18 S26361-F4475-Ex02 max. Number of Infiniband HCA´s increased to 4x each / 4 x total

2011-02-22 S26361-F3626-E2 order number LTO4 changed

2011-02-15 Blu-ray Triple Writer slim SATA and DVD-ROM slim SATA added

2011-02-11 LTO2 removed

2011-01-26 Update: RMK, Memory Order codes / 10Gb Controller ...

2011-01-24 CPU SKUs updated

2010-06-01 First draft


Configurator PRIMERGY RX600 S6 - Fujitsu · 2019. 1. 10. · Title: Configurator PRIMERGY RX600 S6...

Documents

Transcript of Configurator PRIMERGY RX600 S6 - Fujitsu · 2019. 1. 10. · Title: Configurator PRIMERGY RX600 S6...