Configuration for Collaboration Between Two SAP Solution Manager Service Desks

8/6/2019 Configuration for Collaboration Between Two SAP Solution Manager Service Desks

http://slidepdf.com/reader/full/configuration-for-collaboration-between-two-sap-solution-manager-service-desks 1/33

Configuration for Collaboration between twoSAP Solution Manager Service Desks

(Value Added Reseller and Customer)

November 2009



2

Contents

1. General information................................................................................................................................ 3

2. Activities in VAR Solution Manager.......................................................................................................... 5

a. Create Connection................................... ........................... ........................... ........................... ........... 5

b. Configure Interface to Solution Manager Service Desk ......................... ........................... .................... 9

c. Create Value Mapping ........................ ........................... ........................... ........................... .............. 10

d. Define Extended Interface Mapping .......................... ........................... ........................... .................. 15

e. Set Text Filter ........................ ........................... ........................... ........................... ........................... 16

f. Set up Automatic Forwarding of Messages to VAR Customer Service Desk ........................... ............. 17

g. Schedule a Background Job for Resending of Failed Actions ......................... ........................... .......... 21

3. Activities in VAR Customer Solution Manager........................................................................................ 22

a. Create Connection................................... ........................... ........................... ........................... ......... 22

b. Configure Interface to Solution Manager Service Desk ........................ ........................... ................... 23

c. Create Default Value Mapping........................................................................................................... 24

d. Define Extended Interface Mapping .......................... ........................... ........................... .................. 24

e. Set Text Filter ........................ ........................... ........................... ........................... ........................... 24

4. Best Practice ........................ ........................... ........................... ........................... ........................... ..... 25

a. Process Overview ............................ ............................ ............................ ............................ .............. 25

b. Actions Overview ........................... ........................... ........................... ........................... .................. 27

5. FAQ ......................... ........................... ........................... ........................... ........................... .................. 28

a. Enhanced Business Partner Mapping ......................... ........................... ........................... .................. 28

b. Set Status Value to Display Only in VAR Service Desk ........................... ........................... ................... 29

c. Where to Find the External ID of the Message? ........................... ........................... ........................... 32

d. How to Set Up a Trace for Incoming/Outgoing Data in the Solution Manager Service Desk

Interface? ................................................................................................................................................. 32

e. Target Transaction Type from External Service Desk ......................... ........................... ...................... 33



3

1 . General information

Multiple SAP Solution Manager Service Desks can exchange messages between each other. A special use

case is the message exchange between the Solution Manager Service Desk of a Value Added Reseller

(VAR) and the Solution Manager Service Desk of a VAR customer. To make this happen some

configuration has to be done in the VAR Solution Manager and also some configuration in the Solution

Manager of the VAR customer.

At help.sap.com you can find a description of the general collaboration of two Service Desks:

http://help.sap.com/saphelp_sm40/helpdata/en/8a/b0278648ac4f058a7111c3f9b60feb/frameset.htm

Minimum Requirements:

VAR: SAP Solution Manager ST 400 SP19, (SP18: without the automatic forwarding functionality)

VAR Customer: SAP Solution Manager ST400 SP15

Important: Prerequisite for the below described configuration is the implementation of SAP Note 1379076

IMG activities for the connection of VAR Solution Manager Service Desk to Solution Manager Service Desk

of a VAR customer. You have to perform the below described configuration for each connected Service

Desk.

The activities have to be done in both Solution Manager systems:

IMG SP15-17:





4

IMG SP18+:



5

2. Activities in VAR Solution Manager

a. Create Connection

To connect two SAP Solution Manager systems, a classic ABAP RFC connection is recommended.

i . Create RFC user to login from external Service Desk

This user is required in the VAR customer Service Desk system to open the call to the VAR Solution

Manager Service Desk (send message ). It will be stored in the RFC connection from the VAR customer

Solution Manager to the VAR Solution Manager.

1. Define user name.

2. Select user type System.

Important: You have to create a system user in both systems, in VAR Service Desk and in the

VAR customer Service Desk as well, for logon in an interactive target system.



6

ii . A ss ign Roles to the RFC User

You should assign the following roles to the RFC user in the SAP Solution Manager of the VAR:

SAP_SUPPDESK_ADMIN

SAP_SUPPDESK_INTERFACE

SAP_SUPPDESK_PROCESS

Important: For more information on Service Desk roles, please refer to SAP Note 834534.

i ii. Main tain AISUSER Tab le

Go to transaction AISUSER and assign an S-User and customer number to the RFC user. This is necessary

for forwarding “Very High” messages outside business hours to SAP.



7

Important: The S-User should have authorization to create customer messages and send customer

messages to SAP. For more information, please see the guide Configuration Service Desk for VAR

SAP Solution Manager 7.0 EhP1 ST 400 available in the SAP Support Portal under

http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_SCENARIO=0110003

5870000000202&

i v. Create Business Par tner for the RFC User

Create a business partner (type: Person) for the RFC user:

Go to transaction BP.

Create a new business partner of type Person and maintain all necessary data in the Address tab.

Select the BP role Employee

Select the Identification tab and go to the Employee Data group box.

Enter the RFC user ID in the User Name field.

v . Create RFC Destina tion

You should create a RFC connection from VAR Service Desk to the VAR customer Service Desk.





8

Select Create for a new connection of type 3:

Enter necessary data (RFC destination has to be upper case):

Save settings and test the conneciton.



9

b. Configure Interface to Solution Manager Service Desk

The IMG activity Configure Interface to Solution Manager Service Desk configures the interface

between the VAR Service Desk and the VAR customer Service Desk.

Choose Add.

Enter a name and specify the RFC connection for the external service desk system.

Choose Service Provider Customer as type of the external Service Desk.

Choose System User BPas method to get the reporter. This recommended option enables the system

to use the business partner of the RFC user as the reporter.

Save settings.

Select the external service desk interface row and activate the interface as shown in the picture below.

Save settings.

Important: The interface has to be configured in both systems.



10

c. Create Value M apping

As a part of the configuration you should also specify how the data (such as message priority, text types,

category, etc.) from the VAR Service Desk is mapped onto the data from the VAR customer Service Desk

(and vice versa).

The following picture provides an overview of the mapping process between the VAR Service Desk and

the VAR customer Service Desk.

Important: Incoming and outgoing Value Mapping should be created in both systems.

Important: For SAP Solution Manager ST 400 SP21 and lower you should implement SAP Note 1408329.

This note ensures that value mapping is not defined for attributes which should not be synchronized.



11

There are two types of Value Mapping:

Explicit Value Mapping: you define a target value for each source value of a particular attribute

The settings are stored in the tables Value Mapping (1) and Value Mapping (2). They can be

accessed via the IMG activity Define Value Mapping for Service Desk Interface.

Alternative Value Mapping: all values of an attribute will be either mapped to a specified value

(Example 1) or forwarded identically (Example 2).

Example 1:



12

Example 2:

The Settings are stored in the tables Alternative Value Mapping (1) and Alternative Value

Mapping (2). The tables can be accessed via the IMG activity Define Value Mapping for Service

Desk Interface.

Important: Alternative Value Mapping is only considered if there is no explicit value mapping

defined for the particular attribute.

Value Mapping can be generated either automatically or manually. These options are described in the

next sections of this guide.

The Value Added Reseller should compare the customizing settings of his Service Desk with the settings of

the customer’s Service Desk in order to specify the value mapping.

Important: It is recommended to create the refined value mapping in the VAR Service Desk. In the VAR

customer Service Desk it will be sufficient to generate the alternative value mapping as described in

section 2.c.i.



13

i . C reate Value Mapping Automat ical ly

Via the IMG activity Configure Interface to Solution Manager Service Desk you can generate alternative

value mapping between the VAR Service Desk and the VAR customer Service Desk automatically.

To do so, please select the service desk interface row, for which the default value mapping should be

generated, and select the Generate push button as shown in the picture below. There are two options

available:

Overwrite Old Values: overwrites existing mapping

Do Not Overwrite Old Values: does not overwrite existing mapping, only missing mapping values

are generated.

Save settings.

The automatically generated values are written in the tables Alternative Value Mapping (1) and

Alternative Value Mapping (2).



14

ii . Crea te Va lue Mapping Manua ll y

The IMG activity Define Value Mapping for Service Desk Interface provides four activities to create value

mapping manually:

The activities Alternative Value Mapping (1) and Alternative Value Mapping (2) enable you to make the

following settings:

All values will be forwarded identically. For example, message priority of incoming messages is

mapped 1:1 as shown in the picture below:

All values will be mapped to one value. For example, the category of all incoming customer

messages will be set to ‘space’:

Save settings.



15

Further, you can refine your settings in the activities Value Mapping (1) and Value Mapping (2). You can

define a target value for each source value (Explicit Value Mapping). These settings override the data

mapping from activities Alternative Value Mapping (1) and Alternative Value Mapping (2).

Recommendation for VAR use case: The text type SU99 of incoming VAR customer messages should

be mapped 1:1. All other text types should be mapped to the text type Additional Information (SU30).

Incoming text type SU99 can be mapped 1:1 in table Value Mapping (2):

Mapping incoming text types to SU30 in table Alternative Value Mapping (2):

d. Define Ex tended In terface MappingThe IMG step Define Extended Interface Mapping for Service Desk Customizing enables you to publish

your modifications in the interface mapping and is only relevant, if you have modified the SAP CRM

Service Desk Customizing and do not use the standard SAP objects.

For example, you can change the default business partner function ( SLFN0002) for the reporter to

SLFN0008, as shown in the picture below:



16

e. Set Text Fi lter

Via the IMG activity Set Text Filter, you can define which text types are not to be transferred to the VAR

customer Service Desk.

Choose New Entries.

Select the External Service Desk ID using the input help.

Enter the text type that you do not want to be transferred (according to the text profile for the

transaction types that you use for the SAP Solution Manager Service Desk).

Save your entries.



17

f. Set up Automati c Forward ing of Messages to VAR Customer

Service Desk

In this step you will add an action that enables the automatic forwarding of messages to the customer

Service Desk in case of automatic message exchange with SAP.

Go to transaction SPPFCADM.

Select the application CRMD_ORDER and select the Define Action Profile and Actions push button:



18

Select your Service Desk action profile and create a new action with the following settings:

It is recommended to set the Sort Order for Display to value, which comes after the sort order of

basic actions, such as AI_SDK_STANDARD_UPDATE_DNO. Further, this value should be before the

sort order of actions that depend on Z_EXT_AUTOFORWARDING.



19

Choose a Method Call as Permitted Processing Type of Action and select the

AUTO_FORWARD_ICT_TO_THIRD method as shown in the picture below:

Save your entries.

Go back to the initial screen of SPPFCADM and select the push button Condition Configuration

Select your Service Desk action profile and add the newly created auto forwarding action as

shown in the picture below:



20

Go to the Schedule Condition tab and select ICT_AUTO_FW_COND as schedule condition.



21

g. Schedule a Background Job for Resending of Fai led Act ions

If a message is sent from VAR Service Desk to the VAR customer Service Desk, the sending action can fail,

because the message is locked in the customer system.

This report repeats failed automatic external service desk calls that can be caused, for example, by locked

messages in the VAR customer Service Desk. The report ICT_RETRY_FAILED_ACTIONS (available for

SP 19+) repeat the sending procedure.

It is recommended to schedule this report as a background job executed every 15 min.



22

3. Activities in VAR Customer Solution Manager

a. Create Connection

To connect two SAP Solution Manager systems, a classic ABAP RFC connection is recommended.

i . Create RFC User to Login from Central Service Desk

This user is required in the VAR Service Desk system to open the call to the VAR customer SAP Solution

Manager Service Desk (send message ). It will be stored in the RFC connection from the central to the

external Service Desk system.

1. Define user name.

2. Select user type System

i i. A ss ign Roles to the RFC User

Proceed as described in section 2.a.ii of this guide.

i ii . Create Business Partner for the RFC User

Proceed as described in section 2.a.iv of this guide.



23

iv . Creat e RFC Dest in at ion

You should create a RFC connection from the VAR customer Service Desk to the VAR Service Desk.

Proceed as described in section 2.a.v of this guide.

b. Configure Interface to Solution Manager Service Desk

The IMG activity Configure Interface to Solution Manager Service Desk configures the interface between

the VAR Solution Manager Service desk and the VAR customer Service Desk.

Choose Add.

Enter a name and specify the RFC connection for the external service desk system.

Choose Standard as type of the external Service Desk.

Choose System User BPas method to get the reporter. This option enables the system to use the

business partner of the RFC user as the reporter.

Save settings.



24

Select the external service desk interface row and activate the interface as shown in the picture below.

Save settings.

c. Creat e Default Value Mapping

Since the values mapping is performed in the VAR Solution Manager, the data can be taken over

unchanged. This is configured by the default mapping, e.g. automatically generated alternative value

mapping.

To create the default value mapping, please refer to section 2.c.i.

d. Define Ex tended In terface Mapping

Please refer to section 2.d.

e. Set Text Fi lter

Please refer to section 2.e.



25

4. Best Practice

a. Process Overview

STAT_RP_IB: Status Value for Initial Replicated Messages (incoming)STAT_PS_OB: Status Value for Sent Proposed Solution (outgoing)

STAT_FW_OB: Status Value for Sent Outgoing Message

STAT_AC: Status Value for Message Received for Processing

STAT_CL: Status Value for Confirmed Messages

STAT_RJ_IB: Status Value for Rejected Proposes Solution (inbound)



26

Step 1 and 2: The message is sent to the VAR Solution Manager

VAR Customer VAR

Action SLFN0001_ADVANCED_SEND_THIRD

Parameter STAT_FW_OB (optional) STAT_RP_IB

Step 3 and 4: VAR sends the message back to the customer

VAR Customer VAR

Action AI_SDK_SP_SEND_THIRD

Parameter STAT_FW_OB

Step 5 and 6: Customer sends the message back to VAR

VAR Customer VAR


Parameter STAT_FW_OB (optional) STAT_AC

Step 7 and 8: VAR sends a proposed solution to the customer

VAR Customer VAR

Action AI_SDK_SP_SOL_THIRD

Parameter STAT_SP (optional) STAT_PS_OB

Step 9 and 10: Customer rejects the proposed solution and sends the message back to VAR

VAR Customer VAR


Parameter STAT_FW_OB (optional) STAT_RJ_IB

Step 13 and 14: Customer confirms the message

VAR Customer VAR

Action SLFN0001_ADVANCED_CLOSE_THIRD

Parameter STAT_CL



27

b. Actions Overview

Action Description Method

VAR

AI_SDK_SP_SEND_THIRD Send to External Service

Desk

PASS_ICT_SEND_TO_THIRD

AI_SDK_SP_SOL_THIRD Send Solution to External

Service Desk

PASS_ICT_PROPOSE_SOL_TO_THIRD

AI_SDK_SP_SYNC_THIRD Synchronize with Ext.

Service Desk

PASS_ICT_SYNC_TO_THIRD

Z_EXT_AUTOFORWARDING Autoforwarding to External

Service Desk

AUTO_FORWARD_ICT_TO_THIRD

VAR Customer

SLFN0001_ADVANCED_CLOSE_THIRD Close Message in Ext.

Service Desk

SOL_ICT_PPF_CLOSE

SLFN0001_ADVANCED_SEND_THIRD Send to External Service

Desk

PASS_ICT_SEND_TO_THIRD

SLFN0001_ADVANCED_SYNC_THIRD Synchronize with Ext.Service Desk

PASS_ICT_SYNC_TO_THIRD

The VAR customer is recommended to deactivate the action "Send message to SAP"

(SLFN0001_ADVANCED_SEND_SAP)



28

5. FAQ

a . Enhanced Business Par tner Mapp ing

This section describes how to define the Processor in the Customer Solution Manager as the Reporter in

the VAR Solution Manager (in case a business partner with the corresponding email address exists).

Create an implementation in the following BAdI:

Following coding can be used as an example:

DATA: ls_reporter TYPE ict_incident_person,

lv_partner TYPE bu_partner,

lv_email TYPE ad_smtpadr,

lv_lines TYPE i,

lt_bupa_search_res TYPE TABLE OF bus020_search_result,

ls_bupa_search_res LIKE LINE OF lt_bupa_search_res.

READ TABLE i_incoming_data->a_ict_persons INTO ls_reporter WITH KEY person_id

= i_incoming_data->a_ict_head-agent_id.

lv_email = ls_reporter-email.

IF lv_email IS NOT INITIAL.

CALL FUNCTION 'BUPA_SEARCH'

EXPORTING

iv_email = lv_email

TABLES

et_search_result = lt_bupa_search_res.



29

SORT lt_bupa_search_res BY partner.

DELETE ADJACENT DUPLICATES FROM lt_bupa_search_res COMPARING partner.

DESCRIBE TABLE lt_bupa_search_res LINES lv_lines.

IF lv_lines = 1.

READ TABLE lt_bupa_search_res INDEX 1 INTO ls_bupa_search_res.

lv_partner = ls_bupa_search_res-partner.

ENDIF.

IF lv_partner IS NOT INITIAL.

CALL METHOD i_mapped_data->change_reporter

EXPORTING

i_reporter = lv_partner.

ENDIF.

ENDIF.

This leads to the following behavior: If a business partner with the email address of the Processor of themessage within the Customer Solution Manager exists (and is unique), then this business partner will be

set as the Reporter of the message, otherwise the default logic (e.g. business partner of the system user is

defined as Reporter) applies.

b. Set Status Value to Disp lay Only in VAR Serv ice Desk

To improve the use of the Service Desk for the VAR processor, it could make sense to deactivate the

manual setting of the user status ‘Customer Action’ and Solution Proposal’. Otherwise it could happen

that the processor forgets to trigger the corresponding action for interchanging the message with the

external Service Desk. According to the best practice process, these user statuses are set automatically by

the customizing parameter.

To establish this, you need to do the following steps:

Implement your own implementation of BAdI CRM_ORDER_STATUS. Add to the filter value your

necessary status, for example ‘Customer Action’ and ‘Solution Proposal’.



30

As interface class you can use CL_IM_SOLMAN_ICT_STATUS. Activate the implementation.



31

After implementing this BAdI, the system shows the following behaviour for messages which has been

created by the external Service Desk.



32

c . Where to Find the Ex ternal ID of the Message?

The external ID of the message is displayed on the Context tab in the message:

d. How to Set Up a Trace for Incoming/ Outgoing Data in theSolution Manager Service Desk Interface?

Via the IMG activity Define Extended Interface Mapping you can activate(X) or deactivate(Space) the

trace for incoming/outgoing data, as shown in the picture below:

Important: It is recommended to activate the trace for troubleshooting only, and then to deactivate it again

(default: space).

Via the report ICT_DOWNLOAD_SNAPSHOT you can download the results of the trace:



e. Target Transact ion Type from External Service Desk

The transaction type, in which the external Service Desk message is created, is specified in transaction

DNO_CUST04.

Configuration for Collaboration Between Two SAP Solution Manager Service Desks

Documents

Transcript of Configuration for Collaboration Between Two SAP Solution Manager Service Desks