Concrete MD mixer - Daily Service Tasks
2
If you can see bottom of this screen, you need to add hydraulic fluid. 1. Visually check the hydraulic fluid level in the Power Unit. Daily Maintenance Tasks Check the oil level… Check the Fuel level… 2. Visually check the fluid levels for the Engine.
-
Upload
bruce-a-christensen -
Category
Business
-
view
814 -
download
0
description
Producing concrete is very remote locations is the specialty of the Concrete MD mixer. This manual lists the daily service tasks that are used to keep this cement mixer functioning.
Transcript of Concrete MD mixer - Daily Service Tasks
If you can see bottom of this screen, you need to add hydraulic fluid.
1. Visually check the hydraulic fluid level in the Power Unit.
Daily Maintenance Tasks
Check the oil level… Check the
Fuel level…
2. Visually check the fluid levels for the Engine.
3. Grease both bearings.
Grease Here
4. Check and tighten the set screws.
Check Five set-screws
Every 90 Days Tasks
Replace the Hydraulic Filter on the Power Unit Inspect the
mixing auger for wear and missing wear shoes
Change the Engine Oil on the Power Unit
Grease the wheel bearings
