COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100...

4
32 33 Refrigerated dryers Model DEiT 007 DEiT 012 DEiT 018 Capacity (l/min) 700 1200 1800 Max. pressure (bar) 16 16 16 Connecon 1/2” 1/2” 1” WxDxH (mm) 530x300x510 530x300x510 380x514x625 Art. no. DEiT007 DEiT012 DEiT018 For industrial use. Outlet in the back. Refrigerated dryers Model DEiT 026 DEiT 032 DEiT 4000 Capacity (l/min) 2600 3200 3800 Max. pressure (bar) 16 16 16 Connecon 1” 1” 1” WxDxH (mm) 380x514x625 380x514x625 680x511x860 Art. no. DEITt026 DEIT032 DEIT040 For industrial use. Refrigerated dryers Model DEiT 050 DEiT 060 DEiT 080 DEiT 100 Capacity (l/min) 5000 6000 8000 10000 Max. pressure (bar) 16 16 16 16 Connecon 1 1/2” 1 1/2” 1 1/2” 2” WxDxH (mm) 680x511x860 680x511x860 755x555x995 755x555x995 Art. no. DEiT050 DEiT060 DEiT080 DEiT100 For industrial use. Larger models available upon request. Desiccant dryers Model DAS1 DAS2 DAS3 DAS4 Capacity (l/min) 90 140 230 280 Connecon 3/8” 3/8” 3/8” 3/8” Art. no. DAS1 DAS2 DAS3 DAS4 Desiccant dryers Model DAS5 DAS6 DAS7 Capacity (l/min) 370 430 570 Connecon 3/8” 3/8” 3/8” Art. no. DAS5 DAS6 DAS7 Connecon Flow (ltr.min.) Art. no. Best. nr. 1/2” RG 600 AA010CBFX 010AA 1/2” RG 1200 AA015CBFX 015AA 3/4” RG 1800 AA020DBFX 020AA 1” RG 3600 AA 025EBFX 025AA Connecon Flow (ltr.min.) Art. no. Best.nr. 1/2” RG 600 AO010CBFX 010A0 1/2” RG 1200 AO015CBFX 015A0 3/4” RG 1800 AO020DBFX 020A0 1” RG 3600 AO025EBFX 025A0 Pre-lters (P) Connecon Flow (ltr.min.) Art. no. Art. no. 1/2” RG 2200 HFN-018P P-022 3/4” RG 3000 HFN-030P P-030 High eciency lters (S) Connecon Flow (ltr.min.) Art. no. Art. no. 1/2” RG 2200 HFN-018S S-022 3/4” RG 3000 HFN-030S S-030 Silica Filter Silica gel/absorbent Connecon Capacity (l/min.) Art. no. Art. no. 3/4” (1/4”) Excl. gel/absorbent 425 FF39690 FF39691 2.2 kg Cyclones Descripon Art. no. 1/2” RG, 600 ltr./min. WS010CBFX 3/4” RG, 2400 ltr./min. WS020DBFX Incl. oat drain Oil and water separators Descripon Art. no. 1,2 m 3 /min ES2100 3,5 m 3 /min ES2150 The lter absorbs condensaon in the air. Used for tasks with smaller air consumpon. Removes parcles down to 1 micron and oil aerosols down to a max. residual content of 0.6 mg./m3. Used for the protecon of refrigerated dryers etc. Incl. auto drain. Pre-lters - Domnick Hunter (AO) 1.350 1.690 1.990 3.550 4.350 5.450 6.050 Request Request Request Request Request Request Request 2.280 2.550 2.650 260 330 Enquire Enquire 325 410 580 770 110 175 200 350 325 410 580 770 100 175 200 350 350 475 100 130 350 475 400 125 100 130 Removes parcles down to 0.01 micron and oil aerosols down to a max. residual content of 0.01 mg. /m3. Incl. auto drain. High eciency lters - Domnick Hunter (AA) Filter element – pre-lters Filter element – pre-lters Filter element – high e. lters Filter element – high e. lters Refrigerated dryers A refrigerated air dryer removes water from the compressed air down to a predetermined pressure dew point. This is achieved when the hot and humid compressed air enters the refrigerated dryer in which a heat exchanger and a cooling system brings down the air temperature to about 3°C. During the refrigeraon the dew point will drop and cause condensaon. The condensed water is collected and discharged, while the outgoing cold dry compressed air returns to the air-to- air heat exchanger, where it is reheated by the incoming air in order to prevent condensaon in the plant. The refrigerated dryer will normally be installed before the air receiver in order to obtain a “dry” air receiver. Furthermore, it is essenal that the recommended max. temperature for lters and refrigeraon dryer is not exceeded at any me. In case of very high demands for dry air, a desiccant dryer may be used. For more informaon - please contact our Industry Division at +45 70 10 22 10. Aercoolers The aercooler is installed aer the piston compressor. It ensures that the outlet temperature decreases, in order to ensure that the inlet temperature for the compressed air treatment is not too high. In case of a too high inlet temperature, the life span and eciency of the lter and refrigerated dryer will decrease. COMPRESSED AIR TREATMENT REFRIGERATED DRYERS / DESICCANT DRYERS COMPRESSED AIR TREATMENT SEPARATORS / CYCLONES / FILTERS COMPRESSED AIR TREATMENT COMPRESSED AIR TREATMENT

Transcript of COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100...

Page 1: COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100 Capacity (l/min) 5000 6000 8000 10000 Max. pressure (bar) 16 16 16 16 Connection

32 33

Refrigerated dryersModel DEiT 007 DEiT 012 DEiT 018Capacity (l/min) 700 1200 1800Max. pressure (bar) 16 16 16Connection 1/2” 1/2” 1”WxDxH (mm) 530x300x510 530x300x510 380x514x625Art. no. DEiT007 DEiT012 DEiT018

For industrial use. Outlet in the back.

Refrigerated dryersModel DEiT 026 DEiT 032 DEiT 4000Capacity (l/min) 2600 3200 3800Max. pressure (bar) 16 16 16Connection 1” 1” 1”WxDxH (mm) 380x514x625 380x514x625 680x511x860

Art. no. DEITt026 DEIT032 DEIT040

For industrial use.

Refrigerated dryersModel DEiT 050 DEiT 060 DEiT 080 DEiT 100Capacity (l/min) 5000 6000 8000 10000Max. pressure (bar) 16 16 16 16Connection 1 1/2” 1 1/2” 1 1/2” 2”WxDxH (mm) 680x511x860 680x511x860 755x555x995 755x555x995Art. no. DEiT050 DEiT060 DEiT080 DEiT100

For industrial use.Larger models available upon request.

Desiccant dryersModel DAS1 DAS2 DAS3 DAS4Capacity (l/min) 90 140 230 280Connection 3/8” 3/8” 3/8” 3/8”Art. no. DAS1 DAS2 DAS3 DAS4

Desiccant dryersModel DAS5 DAS6 DAS7Capacity (l/min) 370 430 570Connection 3/8” 3/8” 3/8”Art. no. DAS5 DAS6 DAS7

Connection Flow (ltr.min.) Art. no. Best. nr.1/2” RG 600 AA010CBFX 010AA1/2” RG 1200 AA015CBFX 015AA3/4” RG 1800 AA020DBFX 020AA1” RG 3600 AA 025EBFX 025AA

Connection Flow (ltr.min.) Art. no. Best.nr.1/2” RG 600 AO010CBFX 010A01/2” RG 1200 AO015CBFX 015A03/4” RG 1800 AO020DBFX 020A01” RG 3600 AO025EBFX 025A0

Pre-filters (P)Connection Flow (ltr.min.) Art. no. Art. no.1/2” RG 2200 HFN-018P P-0223/4” RG 3000 HFN-030P P-030

High efficiency filters (S)Connection Flow (ltr.min.) Art. no. Art. no.1/2” RG 2200 HFN-018S S-0223/4” RG 3000 HFN-030S S-030

Silica Filter Silica gel/absorbentConnection Capacity (l/min.) Art. no. Art. no.3/4” (1/4”)Excl. gel/absorbent

425 FF39690 FF39691 2.2 kg

CyclonesDescription Art. no.1/2” RG, 600 ltr./min. WS010CBFX3/4” RG, 2400 ltr./min. WS020DBFXIncl. float drain

Oil and water separatorsDescription Art. no.1,2 m3/min ES21003,5 m3/min ES2150

The filter absorbs condensation in the air. Used for tasks with smaller air consumption.

Removes particles down to 1 micron and oil aerosols down to a max. residual content of 0.6 mg./m3. Used for the protection of refrigerated dryers etc. Incl. auto drain.

Pre-filters - Domnick Hunter (AO)

€ 1.350 1.690 1.990

€ 3.550 4.350 5.450 6.050

€ Request Request Request Request

€ Request Request Request

€ 2.280 2.550 2.650

€260330

€EnquireEnquire

€325410580770

€110175200350

€325410580770

€100175200350

€350475

€100130

€350475

400

125

€100130

Removes particles down to 0.01 micron and oil aerosols down to a max. residual content of 0.01 mg./m3. Incl. auto drain.

High efficiency filters - Domnick Hunter (AA)

Filter element – pre-filters

Filter element – pre-filters

Filter element – high eff. filters

Filter element – high eff. filters

Refrigerated dryersA refrigerated air dryer removes water from the compressed air down to a predetermined pressure dew point. This is achieved when the hot and humid compressed air enters the refrigerated dryer in which a heat exchanger and a cooling system brings down the air temperature to about 3°C.

During the refrigeration the dew point will drop and cause condensation. The condensed water is collected and discharged, while the outgoing cold dry compressed air returns to the air-to-air heat exchanger, where it is reheated by the incoming air in order to prevent condensation in the plant.

The refrigerated dryer will normally be installed before the air receiver in order to obtain a “dry” air receiver. Furthermore, it is essential that the recommended max. temperature for filters and

refrigeration dryer is not exceeded at any time.

In case of very high demands for dry air, a desiccant dryer may be used. For more information - please contact our Industry Division at +45 70 10 22 10.

AftercoolersThe aftercooler is installed after the piston compressor. It ensures that the outlet temperature decreases, in order to ensure that the inlet temperature for the compressed air treatment is not too high.

In case of a too high inlet temperature, the life span and efficiency of the filter and refrigerated dryer will decrease.

CO

MP

RE

SS

ED

AIR

TR

EA

TM

EN

T

REFRIGERATED DRYERS / DESICCANT DRYERS

COMPRESSED AIR TREATMENTSEPARATORS / CYCLONES / FILTERS

CO

MP

RE

SS

ED

AIR

TR

EA

TM

EN

T

COMPRESSED AIR TREATMENT

Page 2: COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100 Capacity (l/min) 5000 6000 8000 10000 Max. pressure (bar) 16 16 16 16 Connection

34 35

Connection Flow (ltr.min.) Art.no.1/4” RG 400 AC010ABFIGV3/8” RG 800 AC015BBFIGV

Incl. float drain, wall fitting, reducing valve and manifold. Excl. quick coupling.Please contact our Industrial Division for further advice regarding breathing air quality including specific legislative requirements(D.5.1).

Pressure increaser (Booster)Connection IncreaserCapacity (l/min) 230Inlet 1-10Outlet pressure 2-20 (Pressure ratio max. 1:2)WxDxH (mm) 180x130x110Art.no. FF64710

Air-SaverModel 1” 2”Capacity (l/min) 30 sec. open/close 115 sec.open/closeMax. pressure 16 16Art. no. 3140 3142

Vertical air receiversDescription Art.no.90 l. 11 bar - oceanblue 400698/190 l. 11 bar - galvanized 400726270 l 11 bar - galvanized 400692500 l. 11 bar - oceanblue 400682/1500 l. 11 bar - galvanized 400693900 l. 11 bar - galvanized 400694500 l. 15 bar - galvanized 400695Fittings set 90 l. 11 bar 400698/2Fittings set 270 l 11 bar 400692/1Fittings set 500 l. 11 bar 400693/1Fittings set 900 l. 11 bar 400694/1Fittings set 500 l. 15 bar 400695/1

Pilot valvesDescription Art.no.For relieving of valve 403691

Relief valvesDescription Art.no.1/8” for single phase (1) 4000493/8” for single phase (2) 400048

Horizontal air receiversDescription Art.no.50 l. 11 bar - white 400656/190 l. 11 bar - white 400697/290 l.11 bar-oceanblue st. 400697/1270 l 11 bar - oceanblue 400658/1270 l 11 bar - white 400658/2500 l. 11 bar - oceanblue 400654/1150 l.15 bar - white 400683/1270 l 15 bar - oceanblue 400687/1500 l 15 bar - oceanblue 400663/1

Fittings set.

Condensation tap for receiverDescription Art.no.Auto. water tap. Leads the water out automatically.

HDF120A

Vibration absorbersDescription Art.no.Ø50 x 30 mm with 1 bolt 4715Ø50 x 40 mm with 2 bolts 4716Ø75 x 40 mm with 2 bolts 4717

Safety valves – CE approvalDescription Art.no.1/4” 6 bar CE FF340801/4” 8,5 bar 1900531/4” 11 bar CE 400018/13/8” 8 bar CE FF341223/8” 9,5 bar CE FF340893/8” 10 bar CE 4005973/8” 10,5 bar CE FF340913/8” 11 bar CE 4101103/8” 12 bar CE FF340903/8” 15 bar CE 4005953/8” 16 bar CE 4101551/2” 10 bar CE FF341131/2” 10,5 bar CE FF341091/2” 11 bar CE 4101151/2” 15,5 bar CE FF34116

Ball valvesDescription Art.no.3/8” Ball valve 4000271/2” Ball valve 4003353/4” Ball valve 4003251/8” Balofix 4003361/4” Balofix 4003371/2” Balofix 401442

DrainsDescription Art.no.1/4” 4000233/8” 4004231/2” 400196

Battery incl. 90 liter air receiverDescription Art.no.2 x 90 l. 11 bar oceanblue 400705

Battery incl. 90 liter receiverDescription Art.no.4 x 90 l. 11 bar oceanblue 400704

1.3501.6502.0002.250

Up to 7 day programmable open and close function. 230V.

Incl. safety valves, pressure gauge, taps and plugs. Installation in accordance with legislation.

Incl. safety valves, pressure gauge,Taps and plugs. Establishment Approved by ATtaps and plugs. Installation in accordance

with legislation.

Combination filters / Respiratory protection – Domnick Hunter

Increases the pressure on the main network. Used where a higher operating pressure is sporadically needed.

€530600

€ 750

€ 475 750

€390490

1.000

8585858585

€277392393769769

1.260515

1.0761.590

85

€820

130

Condensation tap for receiverDescription Art.no.Auto. water tap (220 V) incl. timer, filters and nipples.

400470

220

€151515494949493049494950503050

€58

€19

5

Non return valvesDescription Art.no.3/8” 2451051/2” m/15 mm bicone 4006263/4” 4000541” 400259

€11183056

€101214101111

€344

€101225

Coupling hoses and nipplesDescription Art.no.Hose 1/2”, 1,5 m 400006Hose 3/4”, 1,0 m 400107Hose 1”, 1,0 m 400108Nipple 1/2” 84Nipple 3/4” 184Nipple 1” 284

€367075

81317

1.600

Non return valve - kitDescription Art.no.Kit 1/2” 400026KKit 3/4” 400054K

€1317

(1)(2)

For vertical air receiver.

For horizontal air receiver.

DKK350

Underbody coating gunDescription Art.no.Underbody coating gun 4470To underseal

Accessory kitDescription Art.no.Accessory kit 4400

€35

(3)

(1)

(2)

(4)

Blow gunsDescription Art.no.Blow gun, “Airboy” 4431Blow gun 50 cm 4434Blow gun 100 cm 4433Inflation for tyres (bicycle valve) 4435Infaltion for tyres 4436

€1319232424

Oil absorberDescription Art.no.Oil absorber 4445

€65

Cleaning gunsDescription Art.no.Cleaning gun 4440Cleaning gun, JWL 4441

€1740

Pump rods and nipplesDescription Art.no.Pump rod, bike/car 4423Pump rod, twin wheels 4424Nipple, bike 4425Nipple, car 4426Nipple for 4420 4427

€3737101033

(2)(5)

(1)

Air inflatorsDescription Art.no. €

4478

Prof. w/pressure gauge 4422

Air inflatorDescription Art.no. €

180Prof. air inflator PCL. 4418

Prof. w/pressure gauge - 5m. 4422-5w/pressure gauge/rod (1)w/pressure gauge

€49

44194420

46 21

CO

MP

RE

SS

ED

AIR

CO

MP

RE

SS

ED

AIR

AF

TE

R T

RE

AT

ME

NT

AF

TE

R T

RE

AT

ME

NT

BOOSTER / RESPIRATORY PROTECTION/ AIR-SAVER / ACCESSORIES

COMPRESSED AIR TREATMENTCONDENSATION TAPS / AIR RECEIVERS / VALVES

ACCESSORIES

For nipples in blister packages: B + art.no.

Page 3: COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100 Capacity (l/min) 5000 6000 8000 10000 Max. pressure (bar) 16 16 16 16 Connection

36 37

Pressure gaugesDescription Art.no.1/8” 0-12 bar 4001581/8” 0-300 bar w/ glycerin 8000741/4” 0-16 bar 4000221/4” 0-20 bar 6065111/4” 0-250 bar w/ glycerin 163322For air inflator, thread (side) 4421For air inflator, thread (rear) 4421/1

Intake filtersDescription Art.no.3/8” plastic 2600491/2” plastic 2600303/8” metal 2601481/2” metal 2600483/4” metal 260248Filter element 260249

Desert filtersDescription Art.no.RENO desert filter 404610Flange for desert filter 450252Socket 450252/1RENO filter element 404630

Filter for K25 - K100Description Art.no.Air filter - complete K25 - K100 450640Filter element K25 - K100 450238

Solenoid valvesDescription Art.no.1/4” NC 1 x 230 4006431/2” 2-ways. NO 1x 230 4001201/8” 3-ways. NO 1 x 230 400143

Pressure switchDescription Art.no.Excl. motor protec., 220 V, 3 outl. 400021Excl. motor protec., 3 outlets 400020Incl. motor pro., 4-6 amp. 400666Incl. motor pro., 6.3-10 amp. 400667Incl. motor pro., 10-16 amp. 400668Condor pressure monitor. MDR 3 3/8”for PS25050/0100 401666

Condor pressure monitor. MDR 3 3/8” for PS500100 401667

Compressor blocks - industryDescription Art.no.SV203-710 l. 4 KW 400481SV205-970 l. 4 +5.5 KW 400490HW205-720 l. 4 + 5.5 KW 400495HW310-1290 l. 7.5 + 11 KW 400497

FF Filtre Description Art.no.Air filter - completeFilter element - FF

Intake filters Description Art.no.Air filter - complete 404645Filter element 450294

Electric motors - 2800 RPM Description Art.no.2,5 HK/1,8 kW 4000913,0 HK/2,2 kW 4000924,0 HK/3,0 kW 4000935,5 HK/4,0 kW 4000947,5 HK/5,5 kW 400095

CEE plugDescription Art.no.CEE-plug 16A 250077Power supply CEE-plug 16A 250177CEE-plug m/polarity inverter 6A 400507CEE-plug 32A 250277Power supply CEE-plug 32A 250377

Compressor blocksDescription Art.no.K11 - 300 l. 1.5 KW 400033K18 - 420 l. 3.0 KW 400034K25 - 500 l. 4 KW 400035K28 - 650 l. 5.5 KW 400370K30 - 700 l. 5.5 KW 400036K50 - 1200 l 7.5 KW. 400037K18 - 420 l. head unloaded 400172K25 - 500 l. head unloaded 400032K30 - 700 l. head unloaded 400038K50 - 1200 l. head unloaded 400039K60 - 1800 l. head unloaded 400164K100 - 2150 head unloaded 400040

Set of gasketsDescription Art.no.Set of gaskets for SV203/205Set of gaskets for HV205Set of gaskets for HW310Set of gaskets for K11Set of gaskets for K12Set of gaskets for K18Set of gaskets for K25Set of gaskets for K28Set of gaskets for K30Set of gaskets for K50Cylinder head gaskets-FF KAY FF45948Set of cylinder head gaskets for JET (KX) & Tornado (KL) FF45946

Set of valvesDescription Art.no.Set of valves for SV203/SV205Set of valves for HV205Set of valves for HW310Set of valves for K11Set of valves for K18Set of valves for K25 + K28Set of valves for K30Set of valves for K50Set of valves for FF KAY FF52161Valves for JET(KX) Tornado (KL) FF52155

Hose reel incl. PUR hoseDescription Art. no.With 20 m. 3/8” PUR hose 5471With 8 m. 3/8” PUR hose 5472With 18 m. 1/2” PUR hose 5473Revolving arm for 4471, 4472 and 4473 4473/1

Hose reelDescription Art. no.Incl. 30 m. 1/4” PUR hose 4402

Hose reel - automaticDescription Art. no.Incl. 25 m (10x19 mm)Rubber hose 4491

Incl. 25 m (10x14mm)PUR hose 4408

Hose reel - steel, automaticDescription Art. no.Med 10 m 1/4” 18 bar PUR hose. 4492

Hose reel - steel, automaticDescription Art. no.Incl. 15 m PUR hose, 1/4” 4403Incl. 12 m PUR hose, 3/8” 4404

Hose reel - steel, automaticDescription Art. no.

4406

Coiled hose - PURDescription Art. no.1/4”, 2 m. 45741/4”, 4 m. 45751/4”, 6 m. 45761/4”, 8 m. 4577

Air hoses (per metre)Description Art. no.1/4”, rubber 45503/8”, rubber 45551/2”, rubber 45563/8”, hose for breathing air 4558

Hose reel stand for shop exhibitionsDescription Art. no.Hose reel stand (excl. hoses)

Air hosesDescription Art. no.1/4” rubber hose, 10 m 45133/8” rubber w/coupling 10m 4519

Air hoses prof. / Danish couplingDescription Art. no.3/8”, 10 m. w/coupling PUR 45173/8”, 15 m. w/coupling PUR 45163/8”, 20 m. w/coupling PUR 4518

Air hoses (per metre)Description Art. no.1/4”, plastic 45203/8”, plastic 45251/2”, plastic 45305/8”, plastic 4540

Relief valve w/ olive FF32052

€800

1.1001.200

€262640

219229306490633600741127

104

€232232335

18212135351915

€7

20251445

€3662787878

78

78

€13261325271212

€7831

€99

25253920

€8521

€108

295

28

€4921

€95

11095

€2

2,53

3,5

€2,5

346

€27353944

120

€166110180

25

220

€200215

€395

485

430

€995

€2230

€406080 12

€235250365365395

€360480620640870

1.435527695

1.0001.5402.5602.870

2.200

Incl. 20 m PUR hose, 3/8”

2030001205000131000014000331400157140003414000351400370140003614000371

20300022050002310000240003324000342400035240003624000372

Compressor oilDescription Art.no.Compressor oil, fully synthetic. 400464

Compressor oil, fully synthetic. ISO 150 (For 3-Phased) 401164

Klüber ISO 100 (For industry/ring valves) 401064

Screw Compressor oil ISO 46 903-1Compressor oil for Silentair 400469Pneumatik oil Cube 11-1 ltr.Oil for food induced. 1tr. 401264-20Screw Compressor Oil 9240 20

18

18

28

18232042

199031571

50003

20573102057312

CO

MP

RE

SS

ED

AIR

AC

CE

SS

OR

IES

COMPRESSOR BLOCKS / ELECTRIC MOTORS / VALVES / GASKETS / FILTERS

ACCESSORIESC

OM

PR

ES

SE

D A

IRA

CC

ES

SO

RIE

S

HOSES / HOSE REELS

ACCESSORIES

Page 4: COMPRESSED AIR TREATMENT - Weldwell · 2018. 2. 27. · Model DEiT 050 DEiT 060 DEiT 080 DEiT 100 Capacity (l/min) 5000 6000 8000 10000 Max. pressure (bar) 16 16 16 16 Connection

38 39

ElbowsDescription Art. no.1/4” 2500073/8” ind. x 3/8” out. 250028For blister pack: B+art. no.

€44

Tees - male/femaleDescription Art. no.1/4” Tees - female 4001673/8” Tees - female (1) RA023381/2” Tees - female (2) RA023121/4” Tess - male 400174To blister pack: B+art. no.

€5544

Pressure regulatorDescription Art. no.1/4” w/pressure gauge (excl. couplings), right turn 4370

1/4” w/pressure gauge (excl. couplings), left turn 4370/1

23

23

Mini lubricatorDescription Art. no.1/4” 4389For blister pack.: B+art. no.

€11

(1)

(2)

Filter/pressure regulator 1/4”Description Art. no.Filter/pressure regulator 1/4” 4381

Regulator 1/4”+filter/lubricator 4386Lubricator 1/4” 4390

35

5429

Knocks - filter/pressure regulator 1”Description Art. no.Filter/pressure regulatorFilter 1” F55BMANLubricator 1” L55BReduction valve 1” R55Kit KP55Wall fittings ZW55Pressure gauge Ø 63 G63610R

C55BMAN€

262200180145

101813

Paint gunDescription Art. no.Paint gun 4410Paint gun prof. 4415

€34

136

Sandblaster - professionalDescription Art. no.Sandblaster, 1 l bottle 4450Sandblaster incl. hose(prof. 450 l) and safety mask 4457

Sandblaster(dust free, sand recycling) 4460

Nozzle kit, 4 units 4461Syntetic sand, 700 g. 4462

€36

81

58

146

Push in fittingsDescription Art. no.1/4”x Ø6 mm, straight PC0602G1/4”x Ø8 mm, straight PC0802G1/4”x Ø10 mm, straight PC1002GØ12 mm straight coupler PC1202G 5

€445

Push in fittingsDescription Art. no.Ø6 mm, straight coupler PUC06Ø8 mm, straight coupler PUC08Ø10 mm, straight coupler PUC10Ø12 mm straight coupler PUC12 6

€446

Push in fittingsDescription Art. no.Ø6 mm, elbow PUL06Ø8 mm, elbow PUL08Ø10 mm, elbow PUL10Ø12 mm, elbow PUL12 6

€456

PU hoses 25 mDescription Art. no.Hose PU, Ø6 - neutral PUL06Hose PU, Ø8 - neutral PUL08Hose PU, Ø10 - neutral PUL10Hose PU, Ø12 - neutral PUL12

€50606570

Ball nipplesDescription Art.no.1/4” female 49501/4” male 4960

Hose clipsDescription Art.no.11 mm 459113 mm 459215 mm 459318 mm 4594For blister pack.: B+art.no.

Hose connectorsDescription Art.no.1/4” 46973/8” 46981/2” 4699For blister pack.: B+art.no.

Y-connectionsDescription Art.no.1/4” 46003/8” 46051/4” 3 x female 4601For blister pack.: B+art.no.

Hose stubsDescription Art.no.1/4” x 1/4” 49001/4” x 3/8” 49151/4” x 1/2” 49203/8” x 1/4” 49251/2” x 1/2” 49303/8” x 3/8” 4940 4For blister pack.: B+art.no.

Nipple socketsDescription Art.no.1/4” x 1/8” 2500213/8” x 1/4” 2500081/2” x 1/4” 2500301/2” x 3/8” 4000803/4” x 1/2”3/4” x 3/8”For blister pack.: B+art.no.

Hexagon nipplesDescription Art.no.1/8” 3500141/4” 3001853/8” 2500043/4” x 1/2” 2500313/8” x 1/4” 4000811/2” x 3/8” 350012For blister pack.: B+art.no.

Nipples - female/maleDescription Art.no.1/4” female1/4” male3/8” female3/8” male1/2” female1/2” maleFor blister pack.: B+art.no.

Nipples for hosesDescription Art.no.1/4” 5/16”3/8”1/2”For blister pack.: B+art.no.

Quick couplings - maleDescription Art.no.1/4” for breathing air3/8” for breathing air1/2” for breathing air

Quick couplings - with hose unionDescription Art.no.1/4” for breathing air3/8” for breathing air1/2” for breathing air

Quick couplings – femaleDescription Art.no.1/4” for breathing air3/8” for breathing air1/2” for breathing air

Quick couplings - femaleDescription Art.no.1/4” 52048003/8” 52048051/2” 5204810As safety couplings S+best.nrFor blister pack.: B+art.no.

Quick couplings - with hose unionDescription Art.no.1/4” 52048305/16” 52048313/8” 52048351/2” 5204840As safety coupling S+best.nrFor blister pack.: B+art.no.

580480058048055804810

€1,51,51,51,5

€1313

€2,52,52,52,55,5

€333

€12,512,512,5

25

€12,512,512,512,5

25

€454

€223344

€2,52,5

35

2,54

€2,52,52,52,5

44

€2,52,52,5

3

€222222

€222222

€222222

000241433000241433

For breathing air

Quick couplings - maleDescription Art.no.1/4” 52048153/8” 52048201/2” 5204825As safety coupling: S+best.nrFor blister pack.: B+art.no.

€12,512,512,5

25

520468052046905204685

52046865204695

5204687

5204660520466252046655204670

580481558048205804825

580483058048355804840

For breathing air

For breathing air

CO

MP

RE

SS

ED

AIR

AC

CE

SS

OR

IES

FITTINGS

ACCESSORIESC

OM

PR

ES

SE

D A

IRA

CC

ES

SO

RIE

S

FITTINGS / AIR PREPARATION / AIR ACCESORIES

ACCESSORIES

Filter/reg. 1/2”-auto., water C33AM10 160

Knocks - filter/pressure regulator 1/2”Description Art. no.Filter /Pressure regulator C33BMANFilter1/2” F33BMANLubricator 1/2” L33BReduction valve1/2” R33Kit KP33Wall fittings ZW331Pressure gauge, Ø 50 G50610RPneumatic oil, Cube 11, 1 l. 199031571

€121101 8662

59

1320

Filter - auto., water F33AM10 133